v0.10.19

fast registry load

minor fix on skill & registry

stripe ros2 schema desc
add create-device-skill

new registry system backwards to yaml

remove not exist resource

new registry sys
exp. support with add device

add ai conventions

correct raise create resource error

ret info fix revert

ret info fix

fix prcxi check

add create_resource schema

re signal host ready event

add websocket connection timeout and improve reconnection logic

add open_timeout parameter to websocket connection
add TimeoutError and InvalidStatus exception handling
implement exponential backoff for reconnection attempts
simplify reconnection logic flow

add gzip

change pose extra to any

add isFlapY

.conda/base/recipe.yaml

@@ -3,7 +3,7 @@
 
 package:
   name: unilabos
-  version: 0.10.16
+  version: 0.10.19
 
 source:
   path: ../../unilabos
@@ -26,7 +26,7 @@ build:
     - cp $RECIPE_DIR/../../MANIFEST.in $SRC_DIR
     - cp $RECIPE_DIR/../../setup.cfg $SRC_DIR
     - cp $RECIPE_DIR/../../setup.py $SRC_DIR
-    - uv pip install $SRC_DIR
+    - pip install $SRC_DIR
 
 requirements:
   host:
@@ -41,18 +41,20 @@ requirements:
   - networkx
   - typing_extensions
   - websockets
-  - opentrons_shared_data
   - pint
   - fastapi
   - jinja2
   - requests
   - uvicorn
-  - opcua
+  - if: not osx
+    then:
+    - opcua
   - pyserial
   - pandas
   - pymodbus
   - matplotlib
-  - uni-lab::unilabos-env ==0.10.16
+  - pylibftdi
+  - uni-lab::unilabos-env ==0.10.19
 
 about:
   repository: https://github.com/deepmodeling/Uni-Lab-OS

.conda/environment/recipe.yaml

@@ -0,0 +1,39 @@
+# unilabos-env: conda environment dependencies (ROS2 + conda packages)
+
+package:
+  name: unilabos-env
+  version: 0.10.19
+
+build:
+  noarch: generic
+
+requirements:
+  run:
+  # Python
+  - zstd
+  - zstandard
+  - conda-forge::python ==3.11.14
+  - conda-forge::opencv
+  # ROS2 dependencies (from ci-check.yml)
+  - robostack-staging::ros-humble-ros-core
+  - robostack-staging::ros-humble-action-msgs
+  - robostack-staging::ros-humble-std-msgs
+  - robostack-staging::ros-humble-geometry-msgs
+  - robostack-staging::ros-humble-control-msgs
+  - robostack-staging::ros-humble-nav2-msgs
+  - robostack-staging::ros-humble-cv-bridge
+  - robostack-staging::ros-humble-vision-opencv
+  - robostack-staging::ros-humble-tf-transformations
+  - robostack-staging::ros-humble-moveit-msgs
+  - robostack-staging::ros-humble-tf2-ros
+  - robostack-staging::ros-humble-tf2-ros-py
+  - conda-forge::transforms3d
+  - conda-forge::uv
+
+  # UniLabOS custom messages
+  - uni-lab::ros-humble-unilabos-msgs
+
+about:
+  repository: https://github.com/deepmodeling/Uni-Lab-OS
+  license: GPL-3.0-only
+  description: "UniLabOS Environment - ROS2 and conda dependencies"

.conda/full/recipe.yaml

@@ -1,9 +1,9 @@
-# unilabos-full: Full package with all features
+# unilabos-full: Full package with all features
 # Depends on unilabos + complete ROS2 desktop + dev tools
 
 package:
   name: unilabos-full
-  version: 0.10.16
+  version: 0.10.19
 
 build:
   noarch: generic
@@ -11,7 +11,7 @@ build:
 requirements:
   run:
   # Base unilabos package (includes unilabos-env)
-  - uni-lab::unilabos ==0.10.16
+  - uni-lab::unilabos ==0.10.19
   # Documentation tools
   - sphinx
   - sphinx_rtd_theme

.cursor/skills/create-device-skill/SKILL.md

@@ -0,0 +1,328 @@
+---
+name: create-device-skill
+description: Create a skill for any Uni-Lab device by extracting action schemas from the device registry. Use when the user wants to create a new device skill, add device API documentation, or set up action schemas for a device.
+---
+
+# 创建设备 Skill 指南
+
+本 meta-skill 教你如何为任意 Uni-Lab-OS 设备创建完整的 API 操作技能（参考 `unilab-device-api` 的成功案例）。
+
+## 数据源
+
+- **设备注册表**: `unilabos_data/req_device_registry_upload.json`
+- **结构**: `{ "resources": [{ "id": "<device_id>", "class": { "module": "<python_module:ClassName>", "action_value_mappings": { ... } } }] }`
+- **生成时机**: `unilab` 启动并完成注册表上传后自动生成
+- **module 字段**: 格式 `unilabos.devices.xxx.yyy:ClassName`，可转为源码路径 `unilabos/devices/xxx/yyy.py`，阅读源码可了解参数含义和设备行为
+
+## 创建流程
+
+### Step 0 — 收集必备信息（缺一不可，否则询问后终止）
+
+开始前**必须**确认以下 4 项信息全部就绪。如果用户未提供任何一项，**立即询问并终止当前流程**，等用户补齐后再继续。
+
+向用户提问：「请提供你的 unilab 启动参数，我需要以下信息：」
+
+#### 必备项 ①：ak / sk（认证凭据）
+
+来源：启动命令的 `--ak` `--sk` 参数，或 config.py 中的 `ak = "..."` `sk = "..."`。
+
+获取后立即生成 AUTH token：
+
+```bash
+python ./scripts/gen_auth.py <ak> <sk>
+# 或从 config.py 提取
+python ./scripts/gen_auth.py --config <config.py>
+```
+
+认证算法：`base64(ak:sk)` → `Authorization: Lab <token>`
+
+#### 必备项 ②：--addr（目标环境）
+
+决定 API 请求发往哪个服务器。从启动命令的 `--addr` 参数获取：
+
+| `--addr` 值 | BASE URL |
+|-------------|----------|
+| `test` | `https://uni-lab.test.bohrium.com` |
+| `uat` | `https://uni-lab.uat.bohrium.com` |
+| `local` | `http://127.0.0.1:48197` |
+| 不传（默认） | `https://uni-lab.bohrium.com` |
+| 其他自定义 URL | 直接使用该 URL |
+
+#### 必备项 ③：req_device_registry_upload.json（设备注册表）
+
+数据文件由 `unilab` 启动时自动生成，需要定位它：
+
+**推断 working_dir**（即 `unilabos_data` 所在目录）：
+
+| 条件 | working_dir 取值 |
+|------|------------------|
+| 传了 `--working_dir` | `<working_dir>/unilabos_data/`（若子目录已存在则直接用） |
+| 仅传了 `--config` | `<config 文件所在目录>/unilabos_data/` |
+| 都没传 | `<当前工作目录>/unilabos_data/` |
+
+**按优先级搜索文件**：
+
+```
+<推断的 working_dir>/unilabos_data/req_device_registry_upload.json
+<推断的 working_dir>/req_device_registry_upload.json
+<workspace 根目录>/unilabos_data/req_device_registry_upload.json
+```
+
+也可以直接 Glob 搜索：`**/req_device_registry_upload.json`
+
+找到后**必须检查文件修改时间**并告知用户：「找到注册表文件 `<路径>`，生成于 `<时间>`。请确认这是最近一次启动生成的。」超过 1 天提醒用户是否需要重新启动 `unilab`。
+
+**如果文件不存在** → 告知用户先运行 `unilab` 启动命令，等日志出现 `注册表响应数据已保存` 后再执行本流程。**终止。**
+
+#### 必备项 ④：目标设备
+
+用户需要明确要为哪个设备创建 skill。可以是设备名称（如「PRCXI 移液站」）或 device_id（如 `liquid_handler.prcxi`）。
+
+如果用户不确定，运行提取脚本列出所有设备供选择：
+
+```bash
+python ./scripts/extract_device_actions.py --registry <找到的文件路径>
+```
+
+#### 完整示例
+
+用户提供：
+
+```
+--ak a1fd9d4e-xxxx-xxxx-xxxx-d9a69c09f0fd
+--sk 136ff5c6-xxxx-xxxx-xxxx-a03e301f827b
+--addr test
+--port 8003
+--disable_browser
+```
+
+从中提取：
+- ✅ ak/sk → 运行 `gen_auth.py` 得到 `AUTH="Authorization: Lab YTFmZDlk..."`
+- ✅ addr=test → `BASE=https://uni-lab.test.bohrium.com`
+- ✅ 搜索 `unilabos_data/req_device_registry_upload.json` → 找到并确认时间
+- ✅ 用户指明目标设备 → 如 `liquid_handler.prcxi`
+
+**四项全部就绪后才进入 Step 1。**
+
+### Step 1 — 列出可用设备
+
+运行提取脚本，列出所有设备及 action 数量和 Python 源码路径，让用户选择：
+
+```bash
+# 自动搜索（默认在 unilabos_data/ 和当前目录查找）
+python ./scripts/extract_device_actions.py
+
+# 指定注册表文件路径
+python ./scripts/extract_device_actions.py --registry <path/to/req_device_registry_upload.json>
+```
+
+脚本输出包含每个设备的 **Python 源码路径**（从 `class.module` 转换），可用于后续阅读源码理解参数含义。
+
+### Step 2 — 提取 Action Schema
+
+用户选择设备后，运行提取脚本：
+
+```bash
+python ./scripts/extract_device_actions.py [--registry <path>] <device_id> ./skills/<skill-name>/actions/
+```
+
+脚本会显示设备的 Python 源码路径和类名，方便阅读源码了解参数含义。
+
+每个 action 生成一个 JSON 文件，包含：
+- `type` — 作为 API 调用的 `action_type`
+- `schema` — 完整 JSON Schema（含 `properties.goal.properties` 参数定义）
+- `goal` — goal 字段映射（含占位符 `$placeholder`）
+- `goal_default` — 默认值
+
+### Step 3 — 写 action-index.md
+
+按模板为每个 action 写条目：
+
+```markdown
+### `<action_name>`
+
+<用途描述（一句话）>
+
+- **Schema**: [`actions/<filename>.json`](actions/<filename>.json)
+- **核心参数**: `param1`, `param2`（从 schema.required 获取）
+- **可选参数**: `param3`, `param4`
+- **占位符字段**: `field`（需填入物料信息，值以 `$` 开头）
+```
+
+描述规则：
+- 从 `schema.properties` 读参数列表（schema 已提升为 goal 内容）
+- 从 `schema.required` 区分核心/可选参数
+- 按功能分类（移液、枪头、外设等）
+- 标注 `placeholder_keys` 中的字段类型：
+  - `unilabos_resources` → **ResourceSlot**，填入 `{id, name, uuid}`（id 是路径格式，从资源树取物料节点）
+  - `unilabos_devices` → **DeviceSlot**，填入路径字符串如 `"/host_node"`（从资源树筛选 type=device）
+  - `unilabos_nodes` → **NodeSlot**，填入路径字符串如 `"/PRCXI/PRCXI_Deck"`（资源树中任意节点）
+  - `unilabos_class` → **ClassSlot**，填入类名字符串如 `"container"`（从注册表查找）
+- array 类型字段 → `[{id, name, uuid}, ...]`
+- 特殊：`create_resource` 的 `res_id`（ResourceSlot）可填不存在的路径
+
+### Step 4 — 写 SKILL.md
+
+直接复用 `unilab-device-api` 的 API 模板（10 个 endpoint），修改：
+- 设备名称
+- Action 数量
+- 目录列表
+- Session state 中的 `device_name`
+- **AUTH 头** — 使用 Step 0 中 `gen_auth.py` 生成的 `Authorization: Lab <token>`（不要硬编码 `Api` 类型的 key）
+- **Python 源码路径** — 在 SKILL.md 开头注明设备对应的源码文件，方便参考参数含义
+- **Slot 字段表** — 列出本设备哪些 action 的哪些字段需要填入 Slot（物料/设备/节点/类名）
+
+API 模板结构：
+
+```markdown
+## 设备信息
+- device_id, Python 源码路径, 设备类名
+
+## 前置条件（缺一不可）
+- ak/sk → AUTH, --addr → BASE URL
+
+## Session State
+- lab_uuid（通过 API #1 自动匹配，不要问用户）, device_name
+
+## API Endpoints (10 个)
+# 注意：
+# - #1 获取 lab 列表 + 自动匹配 lab_uuid（遍历 is_admin 的 lab，
+#   调用 /lab/info/{uuid} 比对 access_key == ak）
+# - #2 创建工作流用 POST /lab/workflow
+# - #10 获取资源树路径含 lab_uuid: /lab/material/download/{lab_uuid}
+
+## Placeholder Slot 填写规则
+- unilabos_resources → ResourceSlot → {"id":"/path/name","name":"name","uuid":"xxx"}
+- unilabos_devices → DeviceSlot → "/parent/device" 路径字符串
+- unilabos_nodes → NodeSlot → "/parent/node" 路径字符串
+- unilabos_class → ClassSlot → "class_name" 字符串
+- 特例：create_resource 的 res_id 允许填不存在的路径
+- 列出本设备所有 Slot 字段、类型及含义
+
+## 渐进加载策略
+## 完整工作流 Checklist
+```
+
+### Step 5 — 验证
+
+检查文件完整性：
+- [ ] `SKILL.md` 包含 10 个 API endpoint
+- [ ] `SKILL.md` 包含 Placeholder Slot 填写规则（ResourceSlot / DeviceSlot / NodeSlot / ClassSlot + create_resource 特例）和本设备的 Slot 字段表
+- [ ] `action-index.md` 列出所有 action 并有描述
+- [ ] `actions/` 目录中每个 action 有对应 JSON 文件
+- [ ] JSON 文件包含 `type`, `schema`（已提升为 goal 内容）, `goal`, `goal_default`, `placeholder_keys` 字段
+- [ ] 描述能让 agent 判断该用哪个 action
+
+## Action JSON 文件结构
+
+```json
+{
+  "type": "LiquidHandlerTransfer",    // → API 的 action_type
+  "goal": {                           // goal 字段映射
+    "sources": "sources",
+    "targets": "targets",
+    "tip_racks": "tip_racks",
+    "asp_vols": "asp_vols"
+  },
+  "schema": {                         // ← 直接是 goal 的 schema（已提升）
+    "type": "object",
+    "properties": {                   // 参数定义（即请求中 goal 的字段）
+      "sources": { "type": "array", "items": { "type": "object" } },
+      "targets": { "type": "array", "items": { "type": "object" } },
+      "asp_vols": { "type": "array", "items": { "type": "number" } }
+    },
+    "required": [...],
+    "_unilabos_placeholder_info": {   // ← Slot 类型标记
+      "sources": "unilabos_resources",
+      "targets": "unilabos_resources",
+      "tip_racks": "unilabos_resources"
+    }
+  },
+  "goal_default": { ... },            // 默认值
+  "placeholder_keys": {               // ← 汇总所有 Slot 字段
+    "sources": "unilabos_resources",  //    ResourceSlot
+    "targets": "unilabos_resources",
+    "tip_racks": "unilabos_resources",
+    "target_device_id": "unilabos_devices"  // DeviceSlot
+  }
+}
+```
+
+> **注意**：`schema` 已由脚本从原始 `schema.properties.goal` 提升为顶层，直接包含参数定义。
+> `schema.properties` 中的字段即为 API 请求 `param.goal` 中的字段。
+
+## Placeholder Slot 类型体系
+
+`placeholder_keys` / `_unilabos_placeholder_info` 中有 4 种值，对应不同的填写方式：
+
+| placeholder 值 | Slot 类型 | 填写格式 | 选取范围 |
+|---------------|-----------|---------|---------|
+| `unilabos_resources` | ResourceSlot | `{"id": "/path/name", "name": "name", "uuid": "xxx"}` | 仅**物料**节点（不含设备） |
+| `unilabos_devices` | DeviceSlot | `"/parent/device_name"` | 仅**设备**节点（type=device），路径字符串 |
+| `unilabos_nodes` | NodeSlot | `"/parent/node_name"` | **设备 + 物料**，即所有节点，路径字符串 |
+| `unilabos_class` | ClassSlot | `"class_name"` | 注册表中已上报的资源类 name |
+
+### ResourceSlot（`unilabos_resources`）
+
+最常见的类型。从资源树中选取**物料**节点（孔板、枪头盒、试剂槽等）：
+
+```json
+{"id": "/workstation/container1", "name": "container1", "uuid": "ff149a9a-2cb8-419d-8db5-d3ba056fb3c2"}
+```
+
+- 单个（schema type=object）：`{"id": "/path/name", "name": "name", "uuid": "xxx"}`
+- 数组（schema type=array）：`[{"id": "/path/a", "name": "a", "uuid": "xxx"}, ...]`
+- `id` 本身是从 parent 计算的路径格式
+- 根据 action 语义选择正确的物料（如 `sources` = 液体来源，`targets` = 目标位置）
+
+> **特例**：`create_resource` 的 `res_id` 字段，目标物料可能**尚不存在**，此时直接填写期望的路径（如 `"/workstation/container1"`），不需要 uuid。
+
+### DeviceSlot（`unilabos_devices`）
+
+填写**设备路径字符串**。从资源树中筛选 type=device 的节点，从 parent 计算路径：
+
+```
+"/host_node"
+"/bioyond_cell/reaction_station"
+```
+
+- 只填路径字符串，不需要 `{id, uuid}` 对象
+- 根据 action 语义选择正确的设备（如 `target_device_id` = 目标设备）
+
+### NodeSlot（`unilabos_nodes`）
+
+范围 = 设备 + 物料。即资源树中**所有节点**都可以选，填写**路径字符串**：
+
+```
+"/PRCXI/PRCXI_Deck"
+```
+
+- 使用场景：当参数既可能指向物料也可能指向设备时（如 `PumpTransferProtocol` 的 `from_vessel`/`to_vessel`，`create_resource` 的 `parent`）
+
+### ClassSlot（`unilabos_class`）
+
+填写注册表中已上报的**资源类 name**。从本地 `req_resource_registry_upload.json` 中查找：
+
+```
+"container"
+```
+
+### 通过 API #10 获取资源树
+
+```bash
+curl -s -X GET "$BASE/api/v1/lab/material/download/$lab_uuid" -H "$AUTH"
+```
+
+注意 `lab_uuid` 在路径中（不是查询参数）。资源树返回所有节点，每个节点包含 `id`（路径格式）、`name`、`uuid`、`type`、`parent` 等字段。填写 Slot 时需根据 placeholder 类型筛选正确的节点。
+
+## 最终目录结构
+
+```
+./<skill-name>/
+├── SKILL.md              # API 端点 + 渐进加载指引
+├── action-index.md       # 动作索引：描述/用途/核心参数
+└── actions/              # 每个 action 的完整 JSON Schema
+    ├── action1.json
+    ├── action2.json
+    └── ...
+```

.cursor/skills/create-device-skill/scripts/extract_device_actions.py

@@ -0,0 +1,200 @@
+#!/usr/bin/env python3
+"""
+从 req_device_registry_upload.json 中提取指定设备的 action schema。
+
+用法:
+  # 列出所有设备及 action 数量（自动搜索注册表文件）
+  python extract_device_actions.py
+
+  # 指定注册表文件路径
+  python extract_device_actions.py --registry <path/to/req_device_registry_upload.json>
+
+  # 提取指定设备的 action 到目录
+  python extract_device_actions.py <device_id> <output_dir>
+  python extract_device_actions.py --registry <path> <device_id> <output_dir>
+
+示例:
+  python extract_device_actions.py --registry unilabos_data/req_device_registry_upload.json
+  python extract_device_actions.py liquid_handler.prcxi .cursor/skills/unilab-device-api/actions/
+"""
+import json
+import os
+import sys
+from datetime import datetime
+
+REGISTRY_FILENAME = "req_device_registry_upload.json"
+
+def find_registry(explicit_path=None):
+    """
+    查找 req_device_registry_upload.json 文件。
+
+    搜索优先级：
+    1. 用户通过 --registry 显式指定的路径
+    2. <cwd>/unilabos_data/req_device_registry_upload.json
+    3. <cwd>/req_device_registry_upload.json
+    4. <script所在目录>/../../.. (workspace根) 下的 unilabos_data/
+    5. 向上逐级搜索父目录（最多 5 层）
+    """
+    if explicit_path:
+        if os.path.isfile(explicit_path):
+            return explicit_path
+        if os.path.isdir(explicit_path):
+            fp = os.path.join(explicit_path, REGISTRY_FILENAME)
+            if os.path.isfile(fp):
+                return fp
+        print(f"警告: 指定的路径不存在: {explicit_path}")
+        return None
+
+    candidates = [
+        os.path.join("unilabos_data", REGISTRY_FILENAME),
+        REGISTRY_FILENAME,
+    ]
+
+    for c in candidates:
+        if os.path.isfile(c):
+            return c
+
+    script_dir = os.path.dirname(os.path.abspath(__file__))
+    workspace_root = os.path.normpath(os.path.join(script_dir, "..", "..", ".."))
+    for c in candidates:
+        path = os.path.join(workspace_root, c)
+        if os.path.isfile(path):
+            return path
+
+    cwd = os.getcwd()
+    for _ in range(5):
+        parent = os.path.dirname(cwd)
+        if parent == cwd:
+            break
+        cwd = parent
+        for c in candidates:
+            path = os.path.join(cwd, c)
+            if os.path.isfile(path):
+                return path
+
+    return None
+
+def load_registry(path):
+    with open(path, 'r', encoding='utf-8') as f:
+        return json.load(f)
+
+def list_devices(data):
+    """列出所有包含 action_value_mappings 的设备，同时返回 module 路径"""
+    resources = data.get('resources', [])
+    devices = []
+    for res in resources:
+        rid = res.get('id', '')
+        cls = res.get('class', {})
+        avm = cls.get('action_value_mappings', {})
+        module = cls.get('module', '')
+        if avm:
+            devices.append((rid, len(avm), module))
+    return devices
+
+def flatten_schema_to_goal(action_data):
+    """将 schema 中嵌套的 goal 内容提升为顶层 schema，去掉 feedback/result 包装"""
+    schema = action_data.get('schema', {})
+    goal_schema = schema.get('properties', {}).get('goal', {})
+    if goal_schema:
+        action_data = dict(action_data)
+        action_data['schema'] = goal_schema
+    return action_data
+
+
+def extract_actions(data, device_id, output_dir):
+    """提取指定设备的 action schema 到独立 JSON 文件"""
+    resources = data.get('resources', [])
+    for res in resources:
+        if res.get('id') == device_id:
+            cls = res.get('class', {})
+            module = cls.get('module', '')
+            avm = cls.get('action_value_mappings', {})
+            if not avm:
+                print(f"设备 {device_id} 没有 action_value_mappings")
+                return []
+
+            if module:
+                py_path = module.split(":")[0].replace(".", "/") + ".py"
+                class_name = module.split(":")[-1] if ":" in module else ""
+                print(f"Python 源码: {py_path}")
+                if class_name:
+                    print(f"设备类: {class_name}")
+
+            os.makedirs(output_dir, exist_ok=True)
+            written = []
+            for action_name in sorted(avm.keys()):
+                action_data = flatten_schema_to_goal(avm[action_name])
+                filename = action_name.replace('-', '_') + '.json'
+                filepath = os.path.join(output_dir, filename)
+                with open(filepath, 'w', encoding='utf-8') as f:
+                    json.dump(action_data, f, indent=2, ensure_ascii=False)
+                written.append(filename)
+                print(f"  {filepath}")
+            return written
+
+    print(f"设备 {device_id} 未找到")
+    return []
+
+def main():
+    args = sys.argv[1:]
+    explicit_registry = None
+
+    if "--registry" in args:
+        idx = args.index("--registry")
+        if idx + 1 < len(args):
+            explicit_registry = args[idx + 1]
+            args = args[:idx] + args[idx + 2:]
+        else:
+            print("错误: --registry 需要指定路径")
+            sys.exit(1)
+
+    registry_path = find_registry(explicit_registry)
+    if not registry_path:
+        print(f"错误: 找不到 {REGISTRY_FILENAME}")
+        print()
+        print("解决方法:")
+        print("  1. 先运行 unilab 启动命令，等待注册表生成")
+        print("  2. 用 --registry 指定文件路径:")
+        print(f"     python {sys.argv[0]} --registry <path/to/{REGISTRY_FILENAME}>")
+        print()
+        print("搜索过的路径:")
+        for p in [
+            os.path.join("unilabos_data", REGISTRY_FILENAME),
+            REGISTRY_FILENAME,
+            os.path.join("<workspace_root>", "unilabos_data", REGISTRY_FILENAME),
+        ]:
+            print(f"  - {p}")
+        sys.exit(1)
+
+    print(f"注册表: {registry_path}")
+    mtime = os.path.getmtime(registry_path)
+    gen_time = datetime.fromtimestamp(mtime).strftime("%Y-%m-%d %H:%M:%S")
+    size_mb = os.path.getsize(registry_path) / (1024 * 1024)
+    print(f"生成时间: {gen_time}  (文件大小: {size_mb:.1f} MB)")
+    data = load_registry(registry_path)
+
+    if len(args) == 0:
+        devices = list_devices(data)
+        print(f"\n找到 {len(devices)} 个设备:")
+        print(f"{'设备 ID':<50} {'Actions':>7}  {'Python 模块'}")
+        print("-" * 120)
+        for did, count, module in sorted(devices, key=lambda x: x[0]):
+            py_path = module.split(":")[0].replace(".", "/") + ".py" if module else ""
+            print(f"{did:<50} {count:>7}  {py_path}")
+
+    elif len(args) == 2:
+        device_id = args[0]
+        output_dir = args[1]
+        print(f"\n提取 {device_id} 的 actions 到 {output_dir}/")
+        written = extract_actions(data, device_id, output_dir)
+        if written:
+            print(f"\n共写入 {len(written)} 个 action 文件")
+
+    else:
+        print("用法:")
+        print("  python extract_device_actions.py [--registry <path>]                # 列出设备")
+        print("  python extract_device_actions.py [--registry <path>] <device_id> <dir>  # 提取 actions")
+        sys.exit(1)
+
+if __name__ == '__main__':
+    main()

.cursor/skills/create-device-skill/scripts/gen_auth.py

@@ -0,0 +1,69 @@
+#!/usr/bin/env python3
+"""
+从 ak/sk 生成 UniLab API Authorization header。
+
+算法: base64(ak:sk) → "Authorization: Lab <token>"
+
+用法:
+  python gen_auth.py <ak> <sk>
+  python gen_auth.py --config <config.py>
+
+示例:
+  python gen_auth.py myak mysk
+  python gen_auth.py --config experiments/config.py
+"""
+import base64
+import re
+import sys
+
+
+def gen_auth(ak: str, sk: str) -> str:
+    token = base64.b64encode(f"{ak}:{sk}".encode("utf-8")).decode("utf-8")
+    return token
+
+
+def extract_from_config(config_path: str) -> tuple:
+    """从 config.py 中提取 ak 和 sk"""
+    with open(config_path, "r", encoding="utf-8") as f:
+        content = f.read()
+    ak_match = re.search(r'''ak\s*=\s*["']([^"']+)["']''', content)
+    sk_match = re.search(r'''sk\s*=\s*["']([^"']+)["']''', content)
+    if not ak_match or not sk_match:
+        return None, None
+    return ak_match.group(1), sk_match.group(1)
+
+
+def main():
+    args = sys.argv[1:]
+
+    if len(args) == 2 and args[0] == "--config":
+        ak, sk = extract_from_config(args[1])
+        if not ak or not sk:
+            print(f"错误: 在 {args[1]} 中未找到 ak/sk 配置")
+            print("期望格式: ak = \"xxx\"  sk = \"xxx\"")
+            sys.exit(1)
+        print(f"配置文件: {args[1]}")
+    elif len(args) == 2:
+        ak, sk = args
+    else:
+        print("用法:")
+        print("  python gen_auth.py <ak> <sk>")
+        print("  python gen_auth.py --config <config.py>")
+        sys.exit(1)
+
+    token = gen_auth(ak, sk)
+    print(f"ak: {ak}")
+    print(f"sk: {sk}")
+    print()
+    print(f"Authorization header:")
+    print(f"  Authorization: Lab {token}")
+    print()
+    print(f"curl 用法:")
+    print(f'  curl -H "Authorization: Lab {token}" ...')
+    print()
+    print(f"Shell 变量:")
+    print(f'  AUTH="Authorization: Lab {token}"')
+
+
+if __name__ == "__main__":
+    main()

.github/workflows/ci-check.yml

@@ -20,7 +20,7 @@ jobs:
         shell: cmd
 
     steps:
-      - uses: actions/checkout@v4
+      - uses: actions/checkout@v6
         with:
           fetch-depth: 0
 
@@ -47,9 +47,9 @@ jobs:
           uv pip install -r unilabos/utils/requirements.txt
           uv pip install pywinauto git+https://github.com/Xuwznln/pylabrobot.git
           uv pip uninstall enum34 || echo enum34 not installed, skipping
-          uv pip install -e .
+          uv pip install .
 
-      - name: Run check mode (complete_registry)
+      - name: Run check mode (AST registry validation)
         run: |
           call conda activate check-env
           echo Running check mode...

.github/workflows/conda-pack-build.yml

@@ -62,7 +62,7 @@ jobs:
             echo "should_build=false" >> $GITHUB_OUTPUT
           fi
 
-      - uses: actions/checkout@v4
+      - uses: actions/checkout@v6
         if: steps.should_build.outputs.should_build == 'true'
         with:
           ref: ${{ github.event.inputs.branch }}
@@ -312,7 +312,7 @@ jobs:
 
       - name: Upload distribution package
         if: steps.should_build.outputs.should_build == 'true'
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@v6
         with:
           name: unilab-pack-${{ matrix.platform }}-${{ github.event.inputs.branch }}
           path: dist-package/

.github/workflows/deploy-docs.yml

@@ -44,7 +44,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Checkout code
-        uses: actions/checkout@v4
+        uses: actions/checkout@v6
         with:
           # workflow_run 时使用触发工作流的分支，手动触发时使用输入的分支
           ref: ${{ github.event.workflow_run.head_branch || github.event.inputs.branch || github.ref }}
@@ -84,7 +84,7 @@ jobs:
 
       - name: Setup Pages
         id: pages
-        uses: actions/configure-pages@v4
+        uses: actions/configure-pages@v5
         if: |
           github.event.workflow_run.head_branch == 'main' ||
           (github.event_name == 'workflow_dispatch' && github.event.inputs.deploy_to_pages == 'true')
@@ -105,7 +105,7 @@ jobs:
           test -f docs/_build/html/index.html && echo "✓ index.html exists" || echo "✗ index.html missing"
 
       - name: Upload build artifacts
-        uses: actions/upload-pages-artifact@v3
+        uses: actions/upload-pages-artifact@v4
         if: |
           github.event.workflow_run.head_branch == 'main' ||
           (github.event_name == 'workflow_dispatch' && github.event.inputs.deploy_to_pages == 'true')

.github/workflows/multi-platform-build.yml

@@ -77,7 +77,7 @@ jobs:
         shell: bash -l {0}
 
     steps:
-      - uses: actions/checkout@v4
+      - uses: actions/checkout@v6
         with:
           # 如果是 workflow_run 触发，使用触发 CI Check 的 commit
           ref: ${{ github.event.workflow_run.head_sha || github.ref }}
@@ -149,7 +149,7 @@ jobs:
 
       - name: Upload conda package artifacts
         if: steps.should_build.outputs.should_build == 'true'
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@v6
         with:
           name: conda-package-${{ matrix.platform }}
           path: conda-packages-temp

.github/workflows/unilabos-conda-build.yml

@@ -77,7 +77,7 @@ jobs:
         shell: bash -l {0}
 
     steps:
-      - uses: actions/checkout@v4
+      - uses: actions/checkout@v6
         with:
           # 如果是 workflow_run 触发，使用触发 CI Check 的 commit
           ref: ${{ github.event.workflow_run.head_sha || github.ref }}
@@ -131,14 +131,31 @@ jobs:
         if: steps.should_build.outputs.should_build == 'true'
         run: |
           echo "Building unilabos-env (conda environment dependencies)..."
-          rattler-build build -r .conda/env/recipe.yaml -c uni-lab -c robostack-staging -c conda-forge
+          rattler-build build -r .conda/environment/recipe.yaml -c uni-lab -c robostack-staging -c conda-forge
+
+      - name: Upload unilabos-env to Anaconda.org (if enabled)
+        if: steps.should_build.outputs.should_build == 'true' && github.event.inputs.upload_to_anaconda == 'true'
+        run: |
+          echo "Uploading unilabos-env to uni-lab organization..."
+          for package in $(find ./output -name "unilabos-env*.conda"); do
+            anaconda -t ${{ secrets.ANACONDA_API_TOKEN }} upload --user uni-lab --force "$package"
+          done
 
       - name: Build unilabos (with pip package)
         if: steps.should_build.outputs.should_build == 'true'
         run: |
           echo "Building unilabos package..."
+          # 如果已上传到 Anaconda，从 uni-lab channel 获取 unilabos-env；否则从本地 output 获取
           rattler-build build -r .conda/base/recipe.yaml -c uni-lab -c robostack-staging -c conda-forge --channel ./output
 
+      - name: Upload unilabos to Anaconda.org (if enabled)
+        if: steps.should_build.outputs.should_build == 'true' && github.event.inputs.upload_to_anaconda == 'true'
+        run: |
+          echo "Uploading unilabos to uni-lab organization..."
+          for package in $(find ./output -name "unilabos-0*.conda" -o -name "unilabos-[0-9]*.conda"); do
+            anaconda -t ${{ secrets.ANACONDA_API_TOKEN }} upload --user uni-lab --force "$package"
+          done
+
       - name: Build unilabos-full - Only when explicitly requested
         if: |
           steps.should_build.outputs.should_build == 'true' && 
@@ -147,6 +164,17 @@ jobs:
           echo "Building unilabos-full package on ${{ matrix.platform }}..."
           rattler-build build -r .conda/full/recipe.yaml -c uni-lab -c robostack-staging -c conda-forge --channel ./output
 
+      - name: Upload unilabos-full to Anaconda.org (if enabled)
+        if: |
+          steps.should_build.outputs.should_build == 'true' && 
+          github.event.inputs.build_full == 'true' &&
+          github.event.inputs.upload_to_anaconda == 'true'
+        run: |
+          echo "Uploading unilabos-full to uni-lab organization..."
+          for package in $(find ./output -name "unilabos-full*.conda"); do
+            anaconda -t ${{ secrets.ANACONDA_API_TOKEN }} upload --user uni-lab --force "$package"
+          done
+
       - name: List built packages
         if: steps.should_build.outputs.should_build == 'true'
         run: |
@@ -167,17 +195,9 @@ jobs:
 
       - name: Upload conda package artifacts
         if: steps.should_build.outputs.should_build == 'true'
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@v6
         with:
           name: conda-package-unilabos-${{ matrix.platform }}
           path: conda-packages-temp
           if-no-files-found: warn
           retention-days: 30
-
-      - name: Upload to Anaconda.org (uni-lab organization)
-        if: github.event.inputs.upload_to_anaconda == 'true'
-        run: |
-          for package in $(find ./output -name "*.conda"); do
-            echo "Uploading $package to uni-lab organization..."
-            anaconda -t ${{ secrets.ANACONDA_API_TOKEN }} upload --user uni-lab --force "$package"
-          done

.gitignore

@@ -5,6 +5,7 @@ output/
 unilabos_data/
 pyrightconfig.json
 .cursorignore
+device_package*/
 ## Python
 
 # Byte-compiled / optimized / DLL files

AGENTS.md

@@ -0,0 +1,87 @@
+# AGENTS.md
+
+This file provides guidance to Claude Code (claude.ai/code) when working with code in this repository.
+
+Also follow the monorepo-level rules in `../AGENTS.md`.
+
+## Build & Development
+
+```bash
+# Install in editable mode (requires mamba env with python 3.11)
+pip install -e .
+uv pip install -r unilabos/utils/requirements.txt
+
+# Run with a device graph
+unilab --graph <graph.json> --config <config.py> --backend ros
+unilab --graph <graph.json> --config <config.py> --backend simple  # no ROS2 needed
+
+# Common CLI flags
+unilab --app_bridges websocket fastapi    # communication bridges
+unilab --test_mode                        # simulate hardware, no real execution
+unilab --check_mode                       # CI validation of registry imports
+unilab --skip_env_check                   # skip auto-install of dependencies
+unilab --visual rviz|web|disable          # visualization mode
+unilab --is_slave                         # run as slave node
+
+# Workflow upload subcommand
+unilab workflow_upload -f <workflow.json> -n <name> --tags tag1 tag2
+
+# Tests
+pytest tests/                              # all tests
+pytest tests/resources/test_resourcetreeset.py  # single test file
+pytest tests/resources/test_resourcetreeset.py::TestClassName::test_method  # single test
+```
+
+## Architecture
+
+### Startup Flow
+
+`unilab` CLI → `unilabos/app/main.py:main()` → loads config → builds registry → reads device graph (JSON/GraphML) → starts backend thread (ROS2/simple) → starts FastAPI web server + WebSocket client.
+
+### Core Layers
+
+**Registry** (`unilabos/registry/`): Singleton `Registry` class discovers and catalogs all device types, resource types, and communication devices from YAML definitions. Device types live in `registry/devices/*.yaml`, resources in `registry/resources/`, comms in `registry/device_comms/`. The registry resolves class paths to actual Python classes via `utils/import_manager.py`.
+
+**Resource Tracking** (`unilabos/resources/resource_tracker.py`): Pydantic-based `ResourceDict` → `ResourceDictInstance` → `ResourceTreeSet` hierarchy. `ResourceTreeSet` is the canonical in-memory representation of all devices and resources, used throughout the system. Graph I/O is in `resources/graphio.py` (reads JSON/GraphML device topology files into `nx.Graph` + `ResourceTreeSet`).
+
+**Device Drivers** (`unilabos/devices/`): 30+ hardware drivers organized by device type (liquid_handling, hplc, balance, arm, etc.). Each driver is a Python class that gets wrapped by `ros/device_node_wrapper.py:ros2_device_node()` to become a ROS2 node with publishers, subscribers, and action servers.
+
+**ROS2 Layer** (`unilabos/ros/`): `device_node_wrapper.py` dynamically wraps any device class into `ROS2DeviceNode` (defined in `ros/nodes/base_device_node.py`). Preset node types in `ros/nodes/presets/` include `host_node`, `controller_node`, `workstation`, `serial_node`, `camera`. Messages use custom `unilabos_msgs` (pre-built, distributed via releases).
+
+**Protocol Compilation** (`unilabos/compile/`): 20+ protocol compilers (add, centrifuge, dissolve, filter, heatchill, stir, pump, etc.) that transform YAML protocol definitions into executable sequences.
+
+**Communication** (`unilabos/device_comms/`): Hardware communication adapters — OPC-UA client, Modbus PLC, RPC, and a universal driver. `app/communication.py` provides a factory pattern for WebSocket client connections to the cloud.
+
+**Web/API** (`unilabos/app/web/`): FastAPI server with REST API (`api.py`), Jinja2 template pages (`pages.py`), and HTTP client for cloud communication (`client.py`). Runs on port 8002 by default.
+
+### Configuration System
+
+- **Config classes** in `unilabos/config/config.py`: `BasicConfig`, `WSConfig`, `HTTPConfig`, `ROSConfig` — all class-level attributes, loaded from Python config files
+- Config files are `.py` files with matching class names (see `config/example_config.py`)
+- Environment variables override with prefix `UNILABOS_` (e.g., `UNILABOS_BASICCONFIG_PORT=9000`)
+- Device topology defined in graph files (JSON with node-link format, or GraphML)
+
+### Key Data Flow
+
+1. Graph file → `graphio.read_node_link_json()` → `(nx.Graph, ResourceTreeSet, resource_links)`
+2. `ResourceTreeSet` + `Registry` → `initialize_device.initialize_device_from_dict()` → `ROS2DeviceNode` instances
+3. Device nodes communicate via ROS2 topics/actions or direct Python calls (simple backend)
+4. Cloud sync via WebSocket (`app/ws_client.py`) and HTTP (`app/web/client.py`)
+
+### Test Data
+
+Example device graphs and experiment configs are in `unilabos/test/experiments/` (not `tests/`). Registry test fixtures in `unilabos/test/registry/`.
+
+## Code Conventions
+
+- Code comments and log messages in simplified Chinese
+- Python 3.11+, type hints expected
+- Pydantic models for data validation (`resource_tracker.py`)
+- Singleton pattern via `@singleton` decorator (`utils/decorator.py`)
+- Dynamic class loading via `utils/import_manager.py` — device classes resolved at runtime from registry YAML paths
+- CLI argument dashes auto-converted to underscores for consistency
+
+## Licensing
+
+- Framework code: GPL-3.0
+- Device drivers (`unilabos/devices/`): DP Technology Proprietary License — do not redistribute

CLAUDE.md

@@ -0,0 +1,4 @@
+
+Please follow the rules defined in:
+
+@AGENTS.md

docs/developer_guide/add_device.md

@@ -15,6 +15,9 @@ Python 类设备驱动在完成注册表后可以直接在 Uni-Lab 中使用，
 **示例：**
 
 ```python
+from unilabos.registry.decorators import device, topic_config
+
+@device(id="mock_gripper", category=["gripper"], description="Mock Gripper")
 class MockGripper:
     def __init__(self):
         self._position: float = 0.0
@@ -23,19 +26,23 @@ class MockGripper:
         self._status = "Idle"
 
     @property
+    @topic_config()  # 添加 @topic_config 才会定时广播
     def position(self) -> float:
         return self._position
 
     @property
+    @topic_config()
     def velocity(self) -> float:
         return self._velocity
 
     @property
+    @topic_config()
     def torque(self) -> float:
         return self._torque
 
-    # 会被自动识别的设备属性，接入 Uni-Lab 时会定时对外广播
+    # 使用 @topic_config 装饰的属性，接入 Uni-Lab 时会定时对外广播
     @property
+    @topic_config(period=2.0)  # 可自定义发布周期
     def status(self) -> str:
         return self._status
 
@@ -149,7 +156,7 @@ my_device: # 设备唯一标识符
 
 系统会自动分析您的 Python 驱动类并生成：
 
-- `status_types`：从 `@property` 装饰的方法自动识别状态属性
+- `status_types`：从 `@topic_config` 装饰的 `@property` 或方法自动识别状态属性
 - `action_value_mappings`：从类方法自动生成动作映射
 - `init_param_schema`：从 `__init__` 方法分析初始化参数
 - `schema`：前端显示用的属性类型定义
@@ -179,7 +186,9 @@ Uni-Lab 设备驱动是一个 Python 类，需要遵循以下结构：
 
 ```python
 from typing import Dict, Any
+from unilabos.registry.decorators import device, topic_config
 
+@device(id="my_device", category=["general"], description="My Device")
 class MyDevice:
     """设备类文档字符串
 
@@ -198,8 +207,9 @@ class MyDevice:
         # 初始化硬件连接
 
     @property
+    @topic_config()  # 必须添加 @topic_config 才会广播
     def status(self) -> str:
-        """设备状态（会自动广播）"""
+        """设备状态（通过 @topic_config 广播）"""
         return self._status
 
     def my_action(self, param: float) -> Dict[str, Any]:
@@ -217,34 +227,61 @@ class MyDevice:
 
 ## 状态属性 vs 动作方法
 
-### 状态属性（@property）
+### 状态属性（@property + @topic_config）
 
-状态属性会被自动识别并定期广播：
+状态属性需要同时使用 `@property` 和 `@topic_config` 装饰器才会被识别并定期广播：
 
 ```python
+from unilabos.registry.decorators import topic_config
+
 @property
+@topic_config()  # 必须添加，否则不会广播
 def temperature(self) -> float:
     """当前温度"""
     return self._read_temperature()
 
 @property
+@topic_config(period=2.0)  # 可自定义发布周期（秒）
 def status(self) -> str:
     """设备状态: idle, running, error"""
     return self._status
 
 @property
+@topic_config(name="ready")  # 可自定义发布名称
 def is_ready(self) -> bool:
     """设备是否就绪"""
     return self._status == "idle"
 ```
 
+也可以使用普通方法（非 @property）配合 `@topic_config`：
+
+```python
+@topic_config(period=10.0)
+def get_sensor_data(self) -> Dict[str, float]:
+    """获取传感器数据（get_ 前缀会自动去除，发布名为 sensor_data）"""
+    return {"temp": self._temp, "humidity": self._humidity}
+```
+
+**`@topic_config` 参数**:
+
+| 参数 | 类型 | 默认值 | 说明 |
+|------|------|--------|------|
+| `period` | float | 5.0 | 发布周期（秒） |
+| `print_publish` | bool | 节点默认 | 是否打印发布日志 |
+| `qos` | int | 10 | QoS 深度 |
+| `name` | str | None | 自定义发布名称 |
+
+**发布名称优先级**：`@topic_config(name=...)` > `get_` 前缀去除 > 方法名
+
 **特点**:
 
-- 使用`@property`装饰器
+- 必须使用 `@topic_config` 装饰器
-- 只读，不能有参数
+- 支持 `@property` 和普通方法
-- 自动添加到注册表的`status_types`
+- 添加到注册表的 `status_types`
 - 定期发布到 ROS2 topic
 
+> **⚠️ 重要：** 仅有 `@property` 装饰器而没有 `@topic_config` 的属性**不会**被广播。这是一个 Breaking Change。
+
 ### 动作方法
 
 动作方法是设备可以执行的操作：
@@ -497,6 +534,7 @@ class LiquidHandler:
         self._status = "idle"
 
     @property
+    @topic_config()
     def status(self) -> str:
         return self._status
 
@@ -886,7 +924,52 @@ class MyDevice:
 
 ## 最佳实践
 
-### 1. 类型注解
+### 1. 使用 `@device` 装饰器标识设备类
+
+```python
+from unilabos.registry.decorators import device
+
+@device(id="my_device", category=["heating"], description="My Heating Device", icon="heater.webp")
+class MyDevice:
+    ...
+```
+
+- `id`：设备唯一标识符，用于注册表匹配
+- `category`：分类列表，前端用于分组显示
+- `description`：设备描述
+- `icon`：图标文件名（可选）
+
+### 2. 使用 `@topic_config` 声明需要广播的状态
+
+```python
+from unilabos.registry.decorators import topic_config
+
+# ✓ @property + @topic_config → 会广播
+@property
+@topic_config(period=2.0)
+def temperature(self) -> float:
+    return self._temp
+
+# ✓ 普通方法 + @topic_config → 会广播（get_ 前缀自动去除）
+@topic_config(period=10.0)
+def get_sensor_data(self) -> Dict[str, float]:
+    return {"temp": self._temp}
+
+# ✓ 使用 name 参数自定义发布名称
+@property
+@topic_config(name="ready")
+def is_ready(self) -> bool:
+    return self._status == "idle"
+
+# ✗ 仅有 @property，没有 @topic_config → 不会广播
+@property
+def internal_state(self) -> str:
+    return self._state
+```
+
+> **注意：** 与 `@property` 连用时，`@topic_config` 必须放在 `@property` 下面。
+
+### 3. 类型注解
 
 ```python
 from typing import Dict, Any, Optional, List
@@ -901,7 +984,7 @@ def method(
     pass
 ```
 
-### 2. 文档字符串
+### 4. 文档字符串
 
 ```python
 def method(self, param: float) -> Dict[str, Any]:
@@ -923,7 +1006,7 @@ def method(self, param: float) -> Dict[str, Any]:
     pass
 ```
 
-### 3. 配置验证
+### 5. 配置验证
 
 ```python
 def __init__(self, config: Dict[str, Any]):
@@ -937,7 +1020,7 @@ def __init__(self, config: Dict[str, Any]):
     self.baudrate = config['baudrate']
 ```
 
-### 4. 资源清理
+### 6. 资源清理
 
 ```python
 def __del__(self):
@@ -946,7 +1029,7 @@ def __del__(self):
         self.connection.close()
 ```
 
-### 5. 设计前端友好的返回值
+### 7. 设计前端友好的返回值
 
 **记住：返回值会直接显示在 Web 界面**
 

docs/developer_guide/add_registry.md

@@ -422,18 +422,20 @@ placeholder_keys:
 
 ### status_types
 
-系统会扫描你的 Python 类，从状态方法（property 或 get\_方法）自动生成这部分：
+系统会扫描你的 Python 类，从带有 `@topic_config` 装饰器的 `@property` 或方法自动生成这部分：
 
 ```yaml
 status_types:
-  current_temperature: float # 从 get_current_temperature() 或 @property current_temperature
+  current_temperature: float # 从 @topic_config 装饰的 @property 或方法
-  is_heating: bool # 从 get_is_heating() 或 @property is_heating
+  is_heating: bool
-  status: str # 从 get_status() 或 @property status
+  status: str
 ```
 
 **注意事项**：
 
-- 系统会查找所有 `get_` 开头的方法和 `@property` 装饰的属性
+- 仅有带 `@topic_config` 装饰器的 `@property` 或方法才会被识别为状态属性
+- 没有 `@topic_config` 的 `@property` 不会生成 status_types，也不会广播
+- `get_` 前缀的方法名会自动去除前缀（如 `get_temperature` → `temperature`）
 - 类型会自动转成相应的类型（如 `str`、`float`、`bool`）
 - 如果类型是 `Any`、`None` 或未知的，默认使用 `String`
 
@@ -537,11 +539,13 @@ class AdvancedLiquidHandler:
         self._temperature = 25.0
 
     @property
+    @topic_config()
     def status(self) -> str:
         """设备状态"""
         return self._status
 
     @property
+    @topic_config()
     def temperature(self) -> float:
         """当前温度"""
         return self._temperature
@@ -809,21 +813,23 @@ my_temperature_controller:
 你的设备类需要符合以下要求：
 
 ```python
-from unilabos.common.device_base import DeviceBase
+from unilabos.registry.decorators import device, topic_config
 
-class MyDevice(DeviceBase):
+@device(id="my_device", category=["temperature"], description="My Device")
+class MyDevice:
     def __init__(self, config):
         """初始化，参数会自动分析到 init_param_schema.config"""
-        super().__init__(config)
         self.port = config.get('port', '/dev/ttyUSB0')
 
-    # 状态方法（会自动生成到 status_types）
+    # 状态方法（必须添加 @topic_config 才会生成到 status_types 并广播）
     @property
+    @topic_config()
     def status(self):
         """返回设备状态"""
         return "idle"
 
     @property
+    @topic_config()
     def temperature(self):
         """返回当前温度"""
         return 25.0
@@ -1039,7 +1045,34 @@ resource.type      # "resource"
 
 ### 代码规范
 
-1. **始终使用类型注解**
+1. **使用 `@device` 装饰器标识设备类**
+
+```python
+from unilabos.registry.decorators import device
+
+@device(id="my_device", category=["heating"], description="My Device")
+class MyDevice:
+    ...
+```
+
+2. **使用 `@topic_config` 声明广播属性**
+
+```python
+from unilabos.registry.decorators import topic_config
+
+# ✓ 需要广播的状态属性
+@property
+@topic_config(period=2.0)
+def temperature(self) -> float:
+    return self._temp
+
+# ✗ 仅有 @property 不会广播
+@property
+def internal_counter(self) -> int:
+    return self._counter
+```
+
+3. **始终使用类型注解**
 
 ```python
 # ✓ 好
@@ -1051,7 +1084,7 @@ def method(self, resource, device):
     pass
 ```
 
-2. **提供有意义的参数名**
+4. **提供有意义的参数名**
 
 ```python
 # ✓ 好 - 清晰的参数名
@@ -1063,7 +1096,7 @@ def transfer(self, r1: ResourceSlot, r2: ResourceSlot):
     pass
 ```
 
-3. **使用 Optional 表示可选参数**
+5. **使用 Optional 表示可选参数**
 
 ```python
 from typing import Optional
@@ -1076,7 +1109,7 @@ def method(
     pass
 ```
 
-4. **添加详细的文档字符串**
+6. **添加详细的文档字符串**
 
 ```python
 def method(
@@ -1096,13 +1129,13 @@ def method(
     pass
 ```
 
-5. **方法命名规范**
+7. **方法命名规范**
 
-   - 状态方法使用 `@property` 装饰器或 `get_` 前缀
+   - 状态方法使用 `@property` + `@topic_config` 装饰器，或普通方法 + `@topic_config`
    - 动作方法使用动词开头
    - 保持命名清晰、一致
 
-6. **完善的错误处理**
+8. **完善的错误处理**
    - 实现完善的错误处理
    - 添加日志记录
    - 提供有意义的错误信息

docs/developer_guide/networking_overview.md

@@ -221,10 +221,10 @@ Laboratory A    Laboratory B
 
 ```bash
 # 实验室A
-unilab --ak your_ak --sk your_sk --upload_registry --use_remote_resource
+unilab --ak your_ak --sk your_sk --upload_registry
 
 # 实验室B
-unilab --ak your_ak --sk your_sk --upload_registry --use_remote_resource
+unilab --ak your_ak --sk your_sk --upload_registry
 ```
 
 ---

docs/user_guide/best_practice.md

@@ -439,6 +439,9 @@ unilab --ak your_ak --sk your_sk -g test/experiments/mock_devices/mock_all.json
 1. 访问 Web 界面，进入"仪器耗材"模块
 2. 在"仪器设备"区域找到并添加上述设备
 3. 在"物料耗材"区域找到并添加容器
+4. 在workstation中配置protocol_type包含PumpTransferProtocol
+
+![添加Protocol类型](image/add_protocol.png)
 
 ![物料列表](image/material.png)
 
@@ -449,8 +452,9 @@ unilab --ak your_ak --sk your_sk -g test/experiments/mock_devices/mock_all.json
 **操作步骤：**
 
 1. 将两个 `container` 拖拽到 `workstation` 中
-2. 将 `virtual_transfer_pump` 拖拽到 `workstation` 中
+2. 将 `virtual_multiway_valve` 拖拽到 `workstation` 中
-3. 在画布上连接它们（建立父子关系）
+3. 将 `virtual_transfer_pump` 拖拽到 `workstation` 中
+4. 在画布上连接它们（建立父子关系）
 
 ![设备连接](image/links.png)
 

docs/user_guide/launch.md

@@ -22,7 +22,6 @@ options:
   --is_slave            Run the backend as slave node (without host privileges).
   --slave_no_host       Skip waiting for host service in slave mode
   --upload_registry     Upload registry information when starting unilab
-  --use_remote_resource Use remote resources when starting unilab
   --config CONFIG       Configuration file path, supports .py format Python config files
   --port PORT           Port for web service information page
   --disable_browser     Disable opening information page on startup
@@ -85,7 +84,7 @@ Uni-Lab 的启动过程分为以下几个阶段：
 支持两种方式：
 
 - **本地文件**：使用 `-g` 指定图谱文件（支持 JSON 和 GraphML 格式）
-- **远程资源**：使用 `--use_remote_resource` 从云端获取
+- **远程资源**：不指定本地文件即可
 
 ### 7. 注册表构建
 
@@ -196,7 +195,7 @@ unilab --config path/to/your/config.py
 unilab --ak your_ak --sk your_sk -g path/to/graph.json --upload_registry
 
 # 使用远程资源启动
-unilab --ak your_ak --sk your_sk --use_remote_resource
+unilab --ak your_ak --sk your_sk
 
 # 更新注册表
 unilab --ak your_ak --sk your_sk --complete_registry

recipes/msgs/recipe.yaml

@@ -1,6 +1,6 @@
 package:
   name: ros-humble-unilabos-msgs
-  version: 0.10.16
+  version: 0.10.19
 source:
   path: ../../unilabos_msgs
   target_directory: src

recipes/unilabos/recipe.yaml

@@ -1,6 +1,6 @@
 package:
   name: unilabos
-  version: "0.10.16"
+  version: "0.10.19"
 
 source:
   path: ../..

setup.py

@@ -4,7 +4,7 @@ package_name = 'unilabos'
 
 setup(
     name=package_name,
-    version='0.10.16',
+    version='0.10.19',
     packages=find_packages(),
     include_package_data=True,
     install_requires=['setuptools'],

tests/workflow/test.json

@@ -0,0 +1,213 @@
+{
+  "workflow": [
+    {
+      "action": "transfer_liquid",
+      "action_args": {
+        "sources": "cell_lines",
+        "targets": "Liquid_1",
+        "asp_vol": 100.0,
+        "dis_vol": 74.75,
+        "asp_flow_rate": 94.0,
+        "dis_flow_rate": 95.5
+      }
+    },
+    {
+      "action": "transfer_liquid",
+      "action_args": {
+        "sources": "cell_lines",
+        "targets": "Liquid_2",
+        "asp_vol": 100.0,
+        "dis_vol": 74.75,
+        "asp_flow_rate": 94.0,
+        "dis_flow_rate": 95.5
+      }
+    },
+    {
+      "action": "transfer_liquid",
+      "action_args": {
+        "sources": "cell_lines",
+        "targets": "Liquid_3",
+        "asp_vol": 100.0,
+        "dis_vol": 74.75,
+        "asp_flow_rate": 94.0,
+        "dis_flow_rate": 95.5
+      }
+    },
+    {
+      "action": "transfer_liquid",
+      "action_args": {
+        "sources": "cell_lines_2",
+        "targets": "Liquid_4",
+        "asp_vol": 100.0,
+        "dis_vol": 74.75,
+        "asp_flow_rate": 94.0,
+        "dis_flow_rate": 95.5
+      }
+    },
+    {
+      "action": "transfer_liquid",
+      "action_args": {
+        "sources": "cell_lines_2",
+        "targets": "Liquid_5",
+        "asp_vol": 100.0,
+        "dis_vol": 74.75,
+        "asp_flow_rate": 94.0,
+        "dis_flow_rate": 95.5
+      }
+    },
+    {
+      "action": "transfer_liquid",
+      "action_args": {
+        "sources": "cell_lines_2",
+        "targets": "Liquid_6",
+        "asp_vol": 100.0,
+        "dis_vol": 74.75,
+        "asp_flow_rate": 94.0,
+        "dis_flow_rate": 95.5
+      }
+    },
+    {
+      "action": "transfer_liquid",
+      "action_args": {
+        "sources": "cell_lines_3",
+        "targets": "dest_set",
+        "asp_vol": 100.0,
+        "dis_vol": 74.75,
+        "asp_flow_rate": 94.0,
+        "dis_flow_rate": 95.5
+      }
+    },
+    {
+      "action": "transfer_liquid",
+      "action_args": {
+        "sources": "cell_lines_3",
+        "targets": "dest_set_2",
+        "asp_vol": 100.0,
+        "dis_vol": 74.75,
+        "asp_flow_rate": 94.0,
+        "dis_flow_rate": 95.5
+      }
+    },
+    {
+      "action": "transfer_liquid",
+      "action_args": {
+        "sources": "cell_lines_3",
+        "targets": "dest_set_3",
+        "asp_vol": 100.0,
+        "dis_vol": 74.75,
+        "asp_flow_rate": 94.0,
+        "dis_flow_rate": 95.5
+      }
+    }
+  ],
+  "reagent": {
+    "Liquid_1": {
+      "slot": 1,
+      "well": [
+        "A4",
+        "A7",
+        "A10"
+      ],
+      "labware": "rep 1"
+    },
+    "Liquid_4": {
+      "slot": 1,
+      "well": [
+        "A4",
+        "A7",
+        "A10"
+      ],
+      "labware": "rep 1"
+    },
+    "dest_set": {
+      "slot": 1,
+      "well": [
+        "A4",
+        "A7",
+        "A10"
+      ],
+      "labware": "rep 1"
+    },
+    "Liquid_2": {
+      "slot": 2,
+      "well": [
+        "A3",
+        "A5",
+        "A8"
+      ],
+      "labware": "rep 2"
+    },
+    "Liquid_5": {
+      "slot": 2,
+      "well": [
+        "A3",
+        "A5",
+        "A8"
+      ],
+      "labware": "rep 2"
+    },
+    "dest_set_2": {
+      "slot": 2,
+      "well": [
+        "A3",
+        "A5",
+        "A8"
+      ],
+      "labware": "rep 2"
+    },
+    "Liquid_3": {
+      "slot": 3,
+      "well": [
+        "A4",
+        "A6",
+        "A10"
+      ],
+      "labware": "rep 3"
+    },
+    "Liquid_6": {
+      "slot": 3,
+      "well": [
+        "A4",
+        "A6",
+        "A10"
+      ],
+      "labware": "rep 3"
+    },
+    "dest_set_3": {
+      "slot": 3,
+      "well": [
+        "A4",
+        "A6",
+        "A10"
+      ],
+      "labware": "rep 3"
+    },
+    "cell_lines": {
+      "slot": 4,
+      "well": [
+        "A1",
+        "A3",
+        "A5"
+      ],
+      "labware": "DRUG + YOYO-MEDIA"
+    },
+    "cell_lines_2": {
+      "slot": 4,
+      "well": [
+        "A1",
+        "A3",
+        "A5"
+      ],
+      "labware": "DRUG + YOYO-MEDIA"
+    },
+    "cell_lines_3": {
+      "slot": 4,
+      "well": [
+        "A1",
+        "A3",
+        "A5"
+      ],
+      "labware": "DRUG + YOYO-MEDIA"
+    }
+  }
+}

unilabos/__init__.py

@@ -1 +1 @@
-__version__ = "0.10.16"
+__version__ = "0.10.19"

unilabos/app/main.py

@@ -1,8 +1,10 @@
 import argparse
 import asyncio
 import os
+import platform
 import shutil
 import signal
+import subprocess
 import sys
 import threading
 import time
@@ -24,6 +26,84 @@ from unilabos.config.config import load_config, BasicConfig, HTTPConfig
 _restart_requested: bool = False
 _restart_reason: str = ""
 
+RESTART_EXIT_CODE = 42
+
+
+def _build_child_argv():
+    """Build sys.argv for child process, stripping supervisor-only arguments."""
+    result = []
+    skip_next = False
+    for arg in sys.argv:
+        if skip_next:
+            skip_next = False
+            continue
+        if arg in ("--restart_mode", "--restart-mode"):
+            continue
+        if arg in ("--auto_restart_count", "--auto-restart-count"):
+            skip_next = True
+            continue
+        if arg.startswith("--auto_restart_count=") or arg.startswith("--auto-restart-count="):
+            continue
+        result.append(arg)
+    return result
+
+
+def _run_as_supervisor(max_restarts: int):
+    """
+    Supervisor process that spawns and monitors child processes.
+
+    Similar to Uvicorn's --reload: the supervisor itself does no heavy work,
+    it only launches the real process as a child and restarts it when the child
+    exits with RESTART_EXIT_CODE.
+    """
+    child_argv = [sys.executable] + _build_child_argv()
+    restart_count = 0
+
+    print_status(
+        f"[Supervisor] Restart mode enabled (max restarts: {max_restarts}), "
+        f"child command: {' '.join(child_argv)}",
+        "info",
+    )
+
+    while True:
+        print_status(
+            f"[Supervisor] Launching process (restart {restart_count}/{max_restarts})...",
+            "info",
+        )
+
+        try:
+            process = subprocess.Popen(child_argv)
+            exit_code = process.wait()
+        except KeyboardInterrupt:
+            print_status("[Supervisor] Interrupted, terminating child process...", "info")
+            process.terminate()
+            try:
+                process.wait(timeout=10)
+            except subprocess.TimeoutExpired:
+                process.kill()
+                process.wait()
+            sys.exit(1)
+
+        if exit_code == RESTART_EXIT_CODE:
+            restart_count += 1
+            if restart_count > max_restarts:
+                print_status(
+                    f"[Supervisor] Maximum restart count ({max_restarts}) reached, exiting",
+                    "warning",
+                )
+                sys.exit(1)
+            print_status(
+                f"[Supervisor] Child requested restart ({restart_count}/{max_restarts}), restarting in 2s...",
+                "info",
+            )
+            time.sleep(2)
+        else:
+            if exit_code != 0:
+                print_status(f"[Supervisor] Child exited with code {exit_code}", "warning")
+            else:
+                print_status("[Supervisor] Child exited normally", "info")
+            sys.exit(exit_code)
+
 
 def load_config_from_file(config_path):
     if config_path is None:
@@ -65,6 +145,13 @@ def parse_args():
         action="append",
         help="Path to the registry directory",
     )
+    parser.add_argument(
+        "--devices",
+        type=str,
+        default=None,
+        action="append",
+        help="Path to Python code directory for AST-based device/resource scanning",
+    )
     parser.add_argument(
         "--working_dir",
         type=str,
@@ -154,23 +241,47 @@ def parse_args():
         action="store_true",
         help="Skip environment dependency check on startup",
     )
-    parser.add_argument(
-        "--complete_registry",
-        action="store_true",
-        default=False,
-        help="Complete registry information",
-    )
     parser.add_argument(
         "--check_mode",
         action="store_true",
         default=False,
         help="Run in check mode for CI: validates registry imports and ensures no file changes",
     )
+    parser.add_argument(
+        "--complete_registry",
+        action="store_true",
+        default=False,
+        help="Complete and rewrite YAML registry files using AST analysis results",
+    )
     parser.add_argument(
         "--no_update_feedback",
         action="store_true",
         help="Disable sending update feedback to server",
     )
+    parser.add_argument(
+        "--test_mode",
+        action="store_true",
+        default=False,
+        help="Test mode: all actions simulate execution and return mock results without running real hardware",
+    )
+    parser.add_argument(
+        "--extra_resource",
+        action="store_true",
+        default=False,
+        help="Load extra lab_ prefixed labware resources (529 auto-generated definitions from lab_resources.py)",
+    )
+    parser.add_argument(
+        "--restart_mode",
+        action="store_true",
+        default=False,
+        help="Enable supervisor mode: automatically restart the process when triggered via WebSocket",
+    )
+    parser.add_argument(
+        "--auto_restart_count",
+        type=int,
+        default=500,
+        help="Maximum number of automatic restarts in restart mode (default: 500)",
+    )
     # workflow upload subcommand
     workflow_parser = subparsers.add_parser(
         "workflow_upload",
@@ -204,6 +315,12 @@ def parse_args():
         default=False,
         help="Whether to publish the workflow (default: False)",
     )
+    workflow_parser.add_argument(
+        "--description",
+        type=str,
+        default="",
+        help="Workflow description, used when publishing the workflow",
+    )
     return parser
 
 
@@ -215,6 +332,11 @@ def main():
     args = parser.parse_args()
     args_dict = vars(args)
 
+    # Supervisor mode: spawn child processes and monitor for restart
+    if args_dict.get("restart_mode", False):
+        _run_as_supervisor(args_dict.get("auto_restart_count", 5))
+        return
+
     # 环境检查 - 检查并自动安装必需的包 (可选)
     skip_env_check = args_dict.get("skip_env_check", False)
     check_mode = args_dict.get("check_mode", False)
@@ -231,52 +353,60 @@ def main():
     # 加载配置文件，优先加载config，然后从env读取
     config_path = args_dict.get("config")
 
-    if check_mode:
+    # === 解析 working_dir ===
-        args_dict["working_dir"] = os.path.abspath(os.getcwd())
+    # 规则1: working_dir 传入 → 检测 unilabos_data 子目录，已是则不修改
-    # 当 skip_env_check 时，默认使用当前目录作为 working_dir
+    # 规则2: 仅 config_path 传入 → 用其父目录作为 working_dir
-    if skip_env_check and not args_dict.get("working_dir") and not config_path:
+    # 规则4: 两者都传入 → 各用各的，但 working_dir 仍做 unilabos_data 子目录检测
+    raw_working_dir = args_dict.get("working_dir")
+    if raw_working_dir:
+        working_dir = os.path.abspath(raw_working_dir)
+    elif config_path and os.path.exists(config_path):
+        working_dir = os.path.dirname(os.path.abspath(config_path))
+    else:
         working_dir = os.path.abspath(os.getcwd())
-        print_status(f"跳过环境检查模式：使用当前目录作为工作目录 {working_dir}", "info")
+
-        # 检查当前目录是否有 local_config.py
+    # unilabos_data 子目录自动检测
-        local_config_in_cwd = os.path.join(working_dir, "local_config.py")
+    if os.path.basename(working_dir) != "unilabos_data":
-        if os.path.exists(local_config_in_cwd):
+        unilabos_data_sub = os.path.join(working_dir, "unilabos_data")
-            config_path = local_config_in_cwd
+        if os.path.isdir(unilabos_data_sub):
+            working_dir = unilabos_data_sub
+        elif not raw_working_dir and not (config_path and os.path.exists(config_path)):
+            # 未显式指定路径，默认使用 cwd/unilabos_data
+            working_dir = os.path.abspath(os.path.join(os.getcwd(), "unilabos_data"))
+
+    # === 解析 config_path ===
+    if config_path and not os.path.exists(config_path):
+        # config_path 传入但不存在，尝试在 working_dir 中查找
+        candidate = os.path.join(working_dir, "local_config.py")
+        if os.path.exists(candidate):
+            config_path = candidate
+            print_status(f"在工作目录中发现配置文件: {config_path}", "info")
+        else:
+            print_status(
+                f"配置文件 {config_path} 不存在，工作目录 {working_dir} 中也未找到 local_config.py，"
+                f"请通过 --config 传入 local_config.py 文件路径",
+                "error",
+            )
+            os._exit(1)
+    elif not config_path:
+        # 规则3: 未传入 config_path，尝试 working_dir/local_config.py
+        candidate = os.path.join(working_dir, "local_config.py")
+        if os.path.exists(candidate):
+            config_path = candidate
             print_status(f"发现本地配置文件: {config_path}", "info")
         else:
             print_status(f"未指定config路径，可通过 --config 传入 local_config.py 文件路径", "info")
-    elif os.getcwd().endswith("unilabos_data"):
+            print_status(f"您是否为第一次使用？并将当前路径 {working_dir} 作为工作目录？ (Y/n)", "info")
-        working_dir = os.path.abspath(os.getcwd())
+            if check_mode or input() != "n":
-    else:
+                os.makedirs(working_dir, exist_ok=True)
-        working_dir = os.path.abspath(os.path.join(os.getcwd(), "unilabos_data"))
+                config_path = os.path.join(working_dir, "local_config.py")
-
+                shutil.copy(
-    if args_dict.get("working_dir"):
+                    os.path.join(os.path.dirname(os.path.dirname(__file__)), "config", "example_config.py"),
-        working_dir = args_dict.get("working_dir", "")
+                    config_path,
-        if config_path and not os.path.exists(config_path):
-            config_path = os.path.join(working_dir, "local_config.py")
-            if not os.path.exists(config_path):
-                print_status(
-                    f"当前工作目录 {working_dir} 未找到local_config.py，请通过 --config 传入 local_config.py 文件路径",
-                    "error",
                 )
+                print_status(f"已创建 local_config.py 路径： {config_path}", "info")
+            else:
                 os._exit(1)
-    elif config_path and os.path.exists(config_path):
-        working_dir = os.path.dirname(config_path)
-    elif os.path.exists(working_dir) and os.path.exists(os.path.join(working_dir, "local_config.py")):
-        config_path = os.path.join(working_dir, "local_config.py")
-    elif not skip_env_check and not config_path and (
-        not os.path.exists(working_dir) or not os.path.exists(os.path.join(working_dir, "local_config.py"))
-    ):
-        print_status(f"未指定config路径，可通过 --config 传入 local_config.py 文件路径", "info")
-        print_status(f"您是否为第一次使用？并将当前路径 {working_dir} 作为工作目录？ (Y/n)", "info")
-        if input() != "n":
-            os.makedirs(working_dir, exist_ok=True)
-            config_path = os.path.join(working_dir, "local_config.py")
-            shutil.copy(
-                os.path.join(os.path.dirname(os.path.dirname(__file__)), "config", "example_config.py"), config_path
-            )
-            print_status(f"已创建 local_config.py 路径： {config_path}", "info")
-        else:
-            os._exit(1)
 
     # 加载配置文件 (check_mode 跳过)
     print_status(f"当前工作目录为 {working_dir}", "info")
@@ -288,7 +418,9 @@ def main():
 
     if hasattr(BasicConfig, "log_level"):
         logger.info(f"Log level set to '{BasicConfig.log_level}' from config file.")
-    configure_logger(loglevel=BasicConfig.log_level, working_dir=working_dir)
+    file_path = configure_logger(loglevel=BasicConfig.log_level, working_dir=working_dir)
+    if file_path is not None:
+        logger.info(f"[LOG_FILE] {file_path}")
 
     if args.addr != parser.get_default("addr"):
         if args.addr == "test":
@@ -332,8 +464,14 @@ def main():
     BasicConfig.slave_no_host = args_dict.get("slave_no_host", False)
     BasicConfig.upload_registry = args_dict.get("upload_registry", False)
     BasicConfig.no_update_feedback = args_dict.get("no_update_feedback", False)
+    BasicConfig.test_mode = args_dict.get("test_mode", False)
+    if BasicConfig.test_mode:
+        print_status("启用测试模式：所有动作将模拟执行，不调用真实硬件", "warning")
+    BasicConfig.extra_resource = args_dict.get("extra_resource", False)
+    if BasicConfig.extra_resource:
+        print_status("启用额外资源加载：将加载lab_开头的labware资源定义", "info")
     BasicConfig.communication_protocol = "websocket"
-    machine_name = os.popen("hostname").read().strip()
+    machine_name = platform.node()
     machine_name = "".join([c if c.isalnum() or c == "_" else "_" for c in machine_name])
     BasicConfig.machine_name = machine_name
     BasicConfig.vis_2d_enable = args_dict["2d_vis"]
@@ -356,22 +494,32 @@ def main():
     # 显示启动横幅
     print_unilab_banner(args_dict)
 
-    # 注册表 - check_mode 时强制启用 complete_registry
+    # Step 0: AST 分析优先 + YAML 注册表加载
+    # check_mode 和 upload_registry 都会执行实际 import 验证
+    devices_dirs = args_dict.get("devices", None)
     complete_registry = args_dict.get("complete_registry", False) or check_mode
-    lab_registry = build_registry(args_dict["registry_path"], complete_registry, BasicConfig.upload_registry)
+    lab_registry = build_registry(
+        registry_paths=args_dict["registry_path"],
+        devices_dirs=devices_dirs,
+        upload_registry=BasicConfig.upload_registry,
+        check_mode=check_mode,
+        complete_registry=complete_registry,
+    )
 
-    # Check mode: complete_registry 完成后直接退出，git diff 检测由 CI workflow 执行
+    # Check mode: 注册表验证完成后直接退出
     if check_mode:
-        print_status("Check mode: complete_registry 完成，退出", "info")
+        device_count = len(lab_registry.device_type_registry)
+        resource_count = len(lab_registry.resource_type_registry)
+        print_status(f"Check mode: 注册表验证完成 ({device_count} 设备, {resource_count} 资源)，退出", "info")
         os._exit(0)
 
+    # Step 1: 上传全部注册表到服务端，同步保存到 unilabos_data
     if BasicConfig.upload_registry:
-        # 设备注册到服务端 - 需要 ak 和 sk
         if BasicConfig.ak and BasicConfig.sk:
-            print_status("开始注册设备到服务端...", "info")
+            # print_status("开始注册设备到服务端...", "info")
             try:
                 register_devices_and_resources(lab_registry)
-                print_status("设备注册完成", "info")
+                # print_status("设备注册完成", "info")
             except Exception as e:
                 print_status(f"设备注册失败: {e}", "error")
         else:
@@ -456,7 +604,7 @@ def main():
             continue
 
     # 如果从远端获取了物料信息，则与本地物料进行同步
-    if request_startup_json and "nodes" in request_startup_json:
+    if file_path is not None and request_startup_json and "nodes" in request_startup_json:
         print_status("开始同步远端物料到本地...", "info")
         remote_tree_set = ResourceTreeSet.from_raw_dict_list(request_startup_json["nodes"])
         resource_tree_set.merge_remote_resources(remote_tree_set)
@@ -553,6 +701,10 @@ def main():
             open_browser=not args_dict["disable_browser"],
             port=BasicConfig.port,
         )
+        if restart_requested:
+            print_status("[Main] Restart requested, cleaning up...", "info")
+            cleanup_for_restart()
+            os._exit(RESTART_EXIT_CODE)
 
 
 if __name__ == "__main__":

unilabos/app/model.py

@@ -54,6 +54,7 @@ class JobAddReq(BaseModel):
     action_type: str = Field(
         examples=["unilabos_msgs.action._str_single_input.StrSingleInput"], description="action type", default=""
     )
+    sample_material: dict = Field(examples=[{"string": "string"}], description="sample uuid to material uuid")
     action_args: dict = Field(examples=[{"string": "string"}], description="action arguments", default_factory=dict)
     task_id: str = Field(examples=["task_id"], description="task uuid (auto-generated if empty)", default="")
     job_id: str = Field(examples=["job_id"], description="goal uuid (auto-generated if empty)", default="")

unilabos/app/register.py

@@ -1,9 +1,8 @@
-import json
 import time
-from typing import Optional, Tuple, Dict, Any
+from typing import Any, Dict, Optional, Tuple
 
 from unilabos.utils.log import logger
-from unilabos.utils.type_check import TypeEncoder
+from unilabos.utils.tools import normalize_json as _normalize_device
 
 
 def register_devices_and_resources(lab_registry, gather_only=False) -> Optional[Tuple[Dict[str, Any], Dict[str, Any]]]:
@@ -11,50 +10,63 @@ def register_devices_and_resources(lab_registry, gather_only=False) -> Optional[
     注册设备和资源到服务器（仅支持HTTP）
     """
 
-    # 注册资源信息 - 使用HTTP方式
     from unilabos.app.web.client import http_client
 
     logger.info("[UniLab Register] 开始注册设备和资源...")
 
-    # 注册设备信息
     devices_to_register = {}
     for device_info in lab_registry.obtain_registry_device_info():
-        devices_to_register[device_info["id"]] = json.loads(
+        devices_to_register[device_info["id"]] = _normalize_device(device_info)
-            json.dumps(device_info, ensure_ascii=False, cls=TypeEncoder)
+        logger.trace(f"[UniLab Register] 收集设备: {device_info['id']}")
-        )
-        logger.debug(f"[UniLab Register] 收集设备: {device_info['id']}")
 
     resources_to_register = {}
     for resource_info in lab_registry.obtain_registry_resource_info():
         resources_to_register[resource_info["id"]] = resource_info
-        logger.debug(f"[UniLab Register] 收集资源: {resource_info['id']}")
+        logger.trace(f"[UniLab Register] 收集资源: {resource_info['id']}")
 
     if gather_only:
         return devices_to_register, resources_to_register
-    # 注册设备
+
     if devices_to_register:
         try:
             start_time = time.time()
-            response = http_client.resource_registry({"resources": list(devices_to_register.values())})
+            response = http_client.resource_registry(
+                {"resources": list(devices_to_register.values())},
+                tag="device_registry",
+            )
             cost_time = time.time() - start_time
-            if response.status_code in [200, 201]:
+            res_data = response.json() if response.status_code == 200 else {}
-                logger.info(f"[UniLab Register] 成功注册 {len(devices_to_register)} 个设备 {cost_time}ms")
+            skipped = res_data.get("data", {}).get("skipped", False)
+            if skipped:
+                logger.info(
+                    f"[UniLab Register] 设备注册跳过（内容未变化）"
+                    f" {len(devices_to_register)} 个 {cost_time:.3f}s"
+                )
+            elif response.status_code in [200, 201]:
+                logger.info(f"[UniLab Register] 成功注册 {len(devices_to_register)} 个设备 {cost_time:.3f}s")
             else:
-                logger.error(f"[UniLab Register] 设备注册失败: {response.status_code}, {response.text} {cost_time}ms")
+                logger.error(f"[UniLab Register] 设备注册失败: {response.status_code}, {response.text} {cost_time:.3f}s")
         except Exception as e:
             logger.error(f"[UniLab Register] 设备注册异常: {e}")
 
-    # 注册资源
     if resources_to_register:
         try:
             start_time = time.time()
-            response = http_client.resource_registry({"resources": list(resources_to_register.values())})
+            response = http_client.resource_registry(
+                {"resources": list(resources_to_register.values())},
+                tag="resource_registry",
+            )
             cost_time = time.time() - start_time
-            if response.status_code in [200, 201]:
+            res_data = response.json() if response.status_code == 200 else {}
-                logger.info(f"[UniLab Register] 成功注册 {len(resources_to_register)} 个资源 {cost_time}ms")
+            skipped = res_data.get("data", {}).get("skipped", False)
+            if skipped:
+                logger.info(
+                    f"[UniLab Register] 资源注册跳过（内容未变化）"
+                    f" {len(resources_to_register)} 个 {cost_time:.3f}s"
+                )
+            elif response.status_code in [200, 201]:
+                logger.info(f"[UniLab Register] 成功注册 {len(resources_to_register)} 个资源 {cost_time:.3f}s")
             else:
-                logger.error(f"[UniLab Register] 资源注册失败: {response.status_code}, {response.text} {cost_time}ms")
+                logger.error(f"[UniLab Register] 资源注册失败: {response.status_code}, {response.text} {cost_time:.3f}s")
         except Exception as e:
             logger.error(f"[UniLab Register] 资源注册异常: {e}")
-
-    logger.info("[UniLab Register] 设备和资源注册完成.")

unilabos/app/web/api.py

@@ -1052,7 +1052,7 @@ async def handle_file_import(websocket: WebSocket, request_data: dict):
                                 "result": {},
                                 "schema": lab_registry._generate_unilab_json_command_schema(v["args"], k),
                                 "goal_default": {i["name"]: i["default"] for i in v["args"]},
-                                "handles": [],
+                                "handles": {},
                             }
                             # 不生成已配置action的动作
                             for k, v in enhanced_info["action_methods"].items()
@@ -1340,5 +1340,5 @@ def setup_api_routes(app):
     # 启动广播任务
     @app.on_event("startup")
     async def startup_event():
-        asyncio.create_task(broadcast_device_status())
+        asyncio.create_task(broadcast_device_status(), name="web-api-startup-device")
-        asyncio.create_task(broadcast_status_page_data())
+        asyncio.create_task(broadcast_status_page_data(), name="web-api-startup-status")

unilabos/app/web/client.py

@@ -3,11 +3,13 @@ HTTP客户端模块
 
 提供与远程服务器通信的客户端功能，只有host需要用
 """
-
+import gzip
 import json
 import os
 from typing import List, Dict, Any, Optional
 
+from unilabos.utils.tools import fast_dumps as _fast_dumps, fast_dumps_pretty as _fast_dumps_pretty
+
 import requests
 from unilabos.resources.resource_tracker import ResourceTreeSet
 from unilabos.utils.log import info
@@ -74,7 +76,8 @@ class HTTPClient:
             Dict[str, str]: 旧UUID到新UUID的映射关系 {old_uuid: new_uuid}
         """
         with open(os.path.join(BasicConfig.working_dir, "req_resource_tree_add.json"), "w", encoding="utf-8") as f:
-            f.write(json.dumps({"nodes": [x for xs in resources.dump() for x in xs], "mount_uuid": mount_uuid}, indent=4))
+            payload = {"nodes": [x for xs in resources.dump() for x in xs], "mount_uuid": mount_uuid}
+            f.write(json.dumps(payload, indent=4))
         # 从序列化数据中提取所有节点的UUID（保存旧UUID）
         old_uuids = {n.res_content.uuid: n for n in resources.all_nodes}
         if not self.initialized or first_add:
@@ -279,22 +282,54 @@ class HTTPClient:
             )
         return response
 
-    def resource_registry(self, registry_data: Dict[str, Any] | List[Dict[str, Any]]) -> requests.Response:
+    def resource_registry(
+        self, registry_data: Dict[str, Any] | List[Dict[str, Any]], tag: str = "registry",
+    ) -> requests.Response:
         """
-        注册资源到服务器
+        注册资源到服务器，同步保存请求/响应到 unilabos_data
 
         Args:
             registry_data: 注册表数据，格式为 {resource_id: resource_info} / [{resource_info}]
+            tag: 保存文件的标签后缀 (如 "device_registry" / "resource_registry")
 
         Returns:
             Response: API响应对象
         """
+        # 序列化一次，同时用于保存和发送
+        json_bytes = _fast_dumps(registry_data)
+
+        # 保存请求数据到 unilabos_data
+        req_path = os.path.join(BasicConfig.working_dir, f"req_{tag}_upload.json")
+        try:
+            os.makedirs(BasicConfig.working_dir, exist_ok=True)
+            with open(req_path, "wb") as f:
+                f.write(_fast_dumps_pretty(registry_data))
+            logger.trace(f"注册表请求数据已保存: {req_path}")
+        except Exception as e:
+            logger.warning(f"保存注册表请求数据失败: {e}")
+
+        compressed_body = gzip.compress(json_bytes)
+        headers = {
+            "Authorization": f"Lab {self.auth}",
+            "Content-Type": "application/json",
+            "Content-Encoding": "gzip",
+        }
         response = requests.post(
             f"{self.remote_addr}/lab/resource",
-            json=registry_data,
+            data=compressed_body,
-            headers={"Authorization": f"Lab {self.auth}"},
+            headers=headers,
             timeout=30,
         )
+
+        # 保存响应数据到 unilabos_data
+        res_path = os.path.join(BasicConfig.working_dir, f"res_{tag}_upload.json")
+        try:
+            with open(res_path, "w", encoding="utf-8") as f:
+                f.write(f"{response.status_code}\n{response.text}")
+            logger.trace(f"注册表响应数据已保存: {res_path}")
+        except Exception as e:
+            logger.warning(f"保存注册表响应数据失败: {e}")
+
         if response.status_code not in [200, 201]:
             logger.error(f"注册资源失败: {response.status_code}, {response.text}")
         if response.status_code == 200:
@@ -333,6 +368,106 @@ class HTTPClient:
                 logger.error(f"响应内容: {response.text}")
         return None
 
+    def workflow_import(
+        self,
+        name: str,
+        workflow_uuid: str,
+        workflow_name: str,
+        nodes: List[Dict[str, Any]],
+        edges: List[Dict[str, Any]],
+        tags: Optional[List[str]] = None,
+        published: bool = False,
+        description: str = "",
+    ) -> Dict[str, Any]:
+        """
+        导入工作流到服务器，如果 published 为 True，则额外发起发布请求
+
+        Args:
+            name: 工作流名称（顶层）
+            workflow_uuid: 工作流UUID
+            workflow_name: 工作流名称（data内部）
+            nodes: 工作流节点列表
+            edges: 工作流边列表
+            tags: 工作流标签列表，默认为空列表
+            published: 是否发布工作流，默认为False
+            description: 工作流描述，发布时使用
+
+        Returns:
+            Dict: API响应数据，包含 code 和 data (uuid, name)
+        """
+        payload = {
+            "name": name,
+            "data": {
+                "workflow_uuid": workflow_uuid,
+                "workflow_name": workflow_name,
+                "nodes": nodes,
+                "edges": edges,
+                "tags": tags if tags is not None else [],
+            },
+        }
+        # 保存请求到文件
+        with open(os.path.join(BasicConfig.working_dir, "req_workflow_upload.json"), "w", encoding="utf-8") as f:
+            f.write(json.dumps(payload, indent=4, ensure_ascii=False))
+
+        response = requests.post(
+            f"{self.remote_addr}/lab/workflow/owner/import",
+            json=payload,
+            headers={"Authorization": f"Lab {self.auth}"},
+            timeout=60,
+        )
+        # 保存响应到文件
+        with open(os.path.join(BasicConfig.working_dir, "res_workflow_upload.json"), "w", encoding="utf-8") as f:
+            f.write(f"{response.status_code}" + "\n" + response.text)
+
+        if response.status_code == 200:
+            res = response.json()
+            if "code" in res and res["code"] != 0:
+                logger.error(f"导入工作流失败: {response.text}")
+                return res
+            # 导入成功后，如果需要发布则额外发起发布请求
+            if published:
+                imported_uuid = res.get("data", {}).get("uuid", workflow_uuid)
+                publish_res = self.workflow_publish(imported_uuid, description)
+                res["publish_result"] = publish_res
+            return res
+        else:
+            logger.error(f"导入工作流失败: {response.status_code}, {response.text}")
+            return {"code": response.status_code, "message": response.text}
+
+    def workflow_publish(self, workflow_uuid: str, description: str = "") -> Dict[str, Any]:
+        """
+        发布工作流
+
+        Args:
+            workflow_uuid: 工作流UUID
+            description: 工作流描述
+
+        Returns:
+            Dict: API响应数据
+        """
+        payload = {
+            "uuid": workflow_uuid,
+            "description": description,
+            "published": True,
+        }
+        logger.info(f"正在发布工作流: {workflow_uuid}")
+        response = requests.patch(
+            f"{self.remote_addr}/lab/workflow/owner",
+            json=payload,
+            headers={"Authorization": f"Lab {self.auth}"},
+            timeout=60,
+        )
+        if response.status_code == 200:
+            res = response.json()
+            if "code" in res and res["code"] != 0:
+                logger.error(f"发布工作流失败: {response.text}")
+            else:
+                logger.info(f"工作流发布成功: {workflow_uuid}")
+            return res
+        else:
+            logger.error(f"发布工作流失败: {response.status_code}, {response.text}")
+            return {"code": response.status_code, "message": response.text}
+
 
 # 创建默认客户端实例
 http_client = HTTPClient()

unilabos/app/web/controller.py

@@ -327,6 +327,7 @@ def job_add(req: JobAddReq) -> JobData:
             queue_item,
             action_type=action_type,
             action_kwargs=action_args,
+            sample_material=req.sample_material,
             server_info=server_info,
         )
 

unilabos/app/web/server.py

@@ -86,7 +86,7 @@ def setup_server() -> FastAPI:
     # 设置页面路由
     try:
         setup_web_pages(pages)
-        info("[Web] 已加载Web UI模块")
+        # info("[Web] 已加载Web UI模块")
     except ImportError as e:
         info(f"[Web] 未找到Web页面模块: {str(e)}")
     except Exception as e:
@@ -138,7 +138,7 @@ def start_server(host: str = "0.0.0.0", port: int = 8002, open_browser: bool = T
     server_thread = threading.Thread(target=server.run, daemon=True, name="uvicorn_server")
     server_thread.start()
 
-    info("[Web] Server started, monitoring for restart requests...")
+    # info("[Web] Server started, monitoring for restart requests...")
 
     # 监控重启标志
     import unilabos.app.main as main_module

unilabos/app/ws_client.py

@@ -26,6 +26,7 @@ from enum import Enum
 from typing_extensions import TypedDict
 
 from unilabos.app.model import JobAddReq
+from unilabos.resources.resource_tracker import ResourceDictType
 from unilabos.ros.nodes.presets.host_node import HostNode
 from unilabos.utils.type_check import serialize_result_info
 from unilabos.app.communication import BaseCommunicationClient
@@ -76,6 +77,7 @@ class JobInfo:
     start_time: float
     last_update_time: float = field(default_factory=time.time)
     ready_timeout: Optional[float] = None  # READY状态的超时时间
+    always_free: bool = False  # 是否为永久闲置动作(不受排队限制)
 
     def update_timestamp(self):
         """更新最后更新时间"""
@@ -127,6 +129,15 @@ class DeviceActionManager:
             # 总是将job添加到all_jobs中
             self.all_jobs[job_info.job_id] = job_info
 
+            # always_free的动作不受排队限制，直接设为READY
+            if job_info.always_free:
+                job_info.status = JobStatus.READY
+                job_info.update_timestamp()
+                job_info.set_ready_timeout(10)
+                job_log = format_job_log(job_info.job_id, job_info.task_id, job_info.device_id, job_info.action_name)
+                logger.trace(f"[DeviceActionManager] Job {job_log} always_free, start immediately")
+                return True
+
             # 检查是否有正在执行或准备执行的任务
             if device_key in self.active_jobs:
                 # 有正在执行或准备执行的任务，加入队列
@@ -176,11 +187,15 @@ class DeviceActionManager:
                 logger.error(f"[DeviceActionManager] Job {job_log} is not in READY status, current: {job_info.status}")
                 return False
 
-            # 检查设备上是否是这个job
+            # always_free的job不需要检查active_jobs
-            if device_key not in self.active_jobs or self.active_jobs[device_key].job_id != job_id:
+            if not job_info.always_free:
-                job_log = format_job_log(job_info.job_id, job_info.task_id, job_info.device_id, job_info.action_name)
+                # 检查设备上是否是这个job
-                logger.error(f"[DeviceActionManager] Job {job_log} is not the active job for {device_key}")
+                if device_key not in self.active_jobs or self.active_jobs[device_key].job_id != job_id:
-                return False
+                    job_log = format_job_log(
+                        job_info.job_id, job_info.task_id, job_info.device_id, job_info.action_name
+                    )
+                    logger.error(f"[DeviceActionManager] Job {job_log} is not the active job for {device_key}")
+                    return False
 
             # 开始执行任务，将状态从READY转换为STARTED
             job_info.status = JobStatus.STARTED
@@ -203,6 +218,13 @@ class DeviceActionManager:
             job_info = self.all_jobs[job_id]
             device_key = job_info.device_action_key
 
+            # always_free的job直接清理，不影响队列
+            if job_info.always_free:
+                job_info.status = JobStatus.ENDED
+                job_info.update_timestamp()
+                del self.all_jobs[job_id]
+                return None
+
             # 移除活跃任务
             if device_key in self.active_jobs and self.active_jobs[device_key].job_id == job_id:
                 del self.active_jobs[device_key]
@@ -234,9 +256,14 @@ class DeviceActionManager:
             return None
 
     def get_active_jobs(self) -> List[JobInfo]:
-        """获取所有正在执行的任务"""
+        """获取所有正在执行的任务(含active_jobs和always_free的STARTED job)"""
         with self.lock:
-            return list(self.active_jobs.values())
+            jobs = list(self.active_jobs.values())
+            # 补充 always_free 的 STARTED job(它们不在 active_jobs 中)
+            for job in self.all_jobs.values():
+                if job.always_free and job.status == JobStatus.STARTED and job not in jobs:
+                    jobs.append(job)
+            return jobs
 
     def get_queued_jobs(self) -> List[JobInfo]:
         """获取所有排队中的任务"""
@@ -261,6 +288,14 @@ class DeviceActionManager:
             job_info = self.all_jobs[job_id]
             device_key = job_info.device_action_key
 
+            # always_free的job直接清理
+            if job_info.always_free:
+                job_info.status = JobStatus.ENDED
+                del self.all_jobs[job_id]
+                job_log = format_job_log(job_info.job_id, job_info.task_id, job_info.device_id, job_info.action_name)
+                logger.trace(f"[DeviceActionManager] Always-free job {job_log} cancelled")
+                return True
+
             # 如果是正在执行的任务
             if device_key in self.active_jobs and self.active_jobs[device_key].job_id == job_id:
                 # 清理active job状态
@@ -334,13 +369,18 @@ class DeviceActionManager:
         timeout_jobs = []
 
         with self.lock:
-            # 统计READY状态的任务数量
+            # 收集所有需要检查的 READY 任务(active_jobs + always_free READY jobs)
-            ready_jobs_count = sum(1 for job in self.active_jobs.values() if job.status == JobStatus.READY)
+            ready_candidates = list(self.active_jobs.values())
+            for job in self.all_jobs.values():
+                if job.always_free and job.status == JobStatus.READY and job not in ready_candidates:
+                    ready_candidates.append(job)
+
+            ready_jobs_count = sum(1 for job in ready_candidates if job.status == JobStatus.READY)
             if ready_jobs_count > 0:
                 logger.trace(f"[DeviceActionManager] Checking {ready_jobs_count} READY jobs for timeout")  # type: ignore  # noqa: E501
 
             # 找到所有超时的READY任务（只检测，不处理）
-            for job_info in self.active_jobs.values():
+            for job_info in ready_candidates:
                 if job_info.is_ready_timeout():
                     timeout_jobs.append(job_info)
                     job_log = format_job_log(
@@ -369,6 +409,7 @@ class MessageProcessor:
         # 线程控制
         self.is_running = False
         self.thread = None
+        self._loop = None  # asyncio event loop引用，用于外部关闭websocket
         self.reconnect_count = 0
 
         logger.info(f"[MessageProcessor] Initialized for URL: {websocket_url}")
@@ -395,22 +436,31 @@ class MessageProcessor:
     def stop(self) -> None:
         """停止消息处理线程"""
         self.is_running = False
+        # 主动关闭websocket以快速中断消息接收循环
+        ws = self.websocket
+        loop = self._loop
+        if ws and loop and loop.is_running():
+            try:
+                asyncio.run_coroutine_threadsafe(ws.close(), loop)
+            except Exception:
+                pass
         if self.thread and self.thread.is_alive():
             self.thread.join(timeout=2)
         logger.info("[MessageProcessor] Stopped")
 
     def _run(self):
         """运行消息处理主循环"""
-        loop = asyncio.new_event_loop()
+        self._loop = asyncio.new_event_loop()
         try:
-            asyncio.set_event_loop(loop)
+            asyncio.set_event_loop(self._loop)
-            loop.run_until_complete(self._connection_handler())
+            self._loop.run_until_complete(self._connection_handler())
         except Exception as e:
             logger.error(f"[MessageProcessor] Thread error: {str(e)}")
             logger.error(traceback.format_exc())
         finally:
-            if loop:
+            if self._loop:
-                loop.close()
+                self._loop.close()
+            self._loop = None
 
     async def _connection_handler(self):
         """处理WebSocket连接和重连逻辑"""
@@ -427,8 +477,10 @@ class MessageProcessor:
                 async with websockets.connect(
                     self.websocket_url,
                     ssl=ssl_context,
+                    open_timeout=20,
                     ping_interval=WSConfig.ping_interval,
                     ping_timeout=10,
+                    close_timeout=5,
                     additional_headers={
                         "Authorization": f"Lab {BasicConfig.auth_secret()}",
                         "EdgeSession": f"{self.session_id}",
@@ -439,85 +491,98 @@ class MessageProcessor:
                     self.connected = True
                     self.reconnect_count = 0
 
-                    logger.info(f"[MessageProcessor] Connected to {self.websocket_url}")
+                    logger.info(f"[MessageProcessor] 已连接到 {self.websocket_url}")
 
                     # 启动发送协程
-                    send_task = asyncio.create_task(self._send_handler())
+                    send_task = asyncio.create_task(self._send_handler(), name="websocket-send_task")
+
+                    # 每次连接（含重连）后重新向服务端注册，
+                    # 否则服务端不知道客户端已上线，不会推送消息。
+                    if self.websocket_client:
+                        self.websocket_client.publish_host_ready()
 
                     try:
                         # 接收消息循环
                         await self._message_handler()
                     finally:
+                        # 必须在 async with __aexit__ 之前停止 send_task，
+                        # 否则 send_task 会在关闭握手期间继续发送数据，
+                        # 干扰 websockets 库的内部清理，导致 task 泄漏。
+                        self.connected = False
                         send_task.cancel()
                         try:
                             await send_task
                         except asyncio.CancelledError:
                             pass
-                        self.connected = False
 
             except websockets.exceptions.ConnectionClosed:
-                logger.warning("[MessageProcessor] Connection closed")
+                logger.warning("[MessageProcessor] 与服务端连接中断")
-                self.connected = False
+            except TimeoutError:
+                logger.warning(
+                    f"[MessageProcessor] 与服务端连接通信超时 (已尝试 {self.reconnect_count + 1} 次)，请检查您的网络状况"
+                )
+            except websockets.exceptions.InvalidStatus as e:
+                logger.warning(
+                    f"[MessageProcessor] 收到服务端注册码 {e.response.status_code}, 上一进程可能还未退出"
+                )
             except Exception as e:
-                logger.error(f"[MessageProcessor] Connection error: {str(e)}")
                 logger.error(traceback.format_exc())
-                self.connected = False
+                logger.error(f"[MessageProcessor] 尝试重连时出错 {str(e)}")
             finally:
+                self.connected = False
                 self.websocket = None
 
             # 重连逻辑
-            if self.is_running and self.reconnect_count < WSConfig.max_reconnect_attempts:
+            if not self.is_running:
+                break
+            if self.reconnect_count < WSConfig.max_reconnect_attempts:
                 self.reconnect_count += 1
+                backoff = WSConfig.reconnect_interval
                 logger.info(
-                    f"[MessageProcessor] Reconnecting in {WSConfig.reconnect_interval}s "
+                    f"[MessageProcessor] 即将在 {backoff} 秒后重连 (已尝试 {self.reconnect_count}/{WSConfig.max_reconnect_attempts})"
-                    f"(attempt {self.reconnect_count}/{WSConfig.max_reconnect_attempts})"
                 )
-                await asyncio.sleep(WSConfig.reconnect_interval)
+                await asyncio.sleep(backoff)
-            elif self.reconnect_count >= WSConfig.max_reconnect_attempts:
+            else:
                 logger.error("[MessageProcessor] Max reconnection attempts reached")
                 break
-            else:
-                self.reconnect_count -= 1
 
     async def _message_handler(self):
-        """处理接收到的消息"""
+        """处理接收到的消息。
+
+        ConnectionClosed 不在此处捕获，让其向上传播到 _connection_handler，
+        以便 async with websockets.connect() 的 __aexit__ 能感知连接已断，
+        正确清理内部 task，避免 task 泄漏。
+        """
         if not self.websocket:
             logger.error("[MessageProcessor] WebSocket connection is None")
             return
 
-        try:
+        async for message in self.websocket:
-            async for message in self.websocket:
+            try:
-                try:
+                data = json.loads(message)
-                    data = json.loads(message)
+                message_type = data.get("action", "")
-                    message_type = data.get("action", "")
+                message_data = data.get("data")
-                    message_data = data.get("data")
+                if self.session_id and self.session_id == data.get("edge_session"):
-                    if self.session_id and self.session_id == data.get("edge_session"):
+                    await self._process_message(message_type, message_data)
-                        await self._process_message(message_type, message_data)
+                else:
+                    if message_type.endswith("_material"):
+                        logger.trace(
+                            f"[MessageProcessor] 收到一条归属 {data.get('edge_session')} 的旧消息：{data}"
+                        )
+                        logger.debug(
+                            f"[MessageProcessor] 跳过了一条归属 {data.get('edge_session')} 的旧消息: {data.get('action')}"
+                        )
                     else:
-                        if message_type.endswith("_material"):
+                        await self._process_message(message_type, message_data)
-                            logger.trace(
+            except json.JSONDecodeError:
-                                f"[MessageProcessor] 收到一条归属 {data.get('edge_session')} 的旧消息：{data}"
+                logger.error(f"[MessageProcessor] Invalid JSON received: {message}")
-                            )
+            except Exception as e:
-                            logger.debug(
+                logger.error(f"[MessageProcessor] Error processing message: {str(e)}")
-                                f"[MessageProcessor] 跳过了一条归属 {data.get('edge_session')} 的旧消息: {data.get('action')}"
+                logger.error(traceback.format_exc())
-                            )
-                        else:
-                            await self._process_message(message_type, message_data)
-                except json.JSONDecodeError:
-                    logger.error(f"[MessageProcessor] Invalid JSON received: {message}")
-                except Exception as e:
-                    logger.error(f"[MessageProcessor] Error processing message: {str(e)}")
-                    logger.error(traceback.format_exc())
-
-        except websockets.exceptions.ConnectionClosed:
-            logger.info("[MessageProcessor] Message handler stopped - connection closed")
-        except Exception as e:
-            logger.error(f"[MessageProcessor] Message handler error: {str(e)}")
-            logger.error(traceback.format_exc())
 
     async def _send_handler(self):
         """处理发送队列中的消息"""
-        logger.debug("[MessageProcessor] Send handler started")
+        logger.trace("[MessageProcessor] Send handler started")
 
         try:
             while self.connected and self.websocket:
@@ -545,7 +610,7 @@ class MessageProcessor:
                         try:
                             message_str = json.dumps(msg, ensure_ascii=False)
                             await self.websocket.send(message_str)
-                            logger.trace(f"[MessageProcessor] Message sent: {msg.get('action', 'unknown')}")  # type: ignore  # noqa: E501
+                            # logger.trace(f"[MessageProcessor] Message sent: {msg.get('action', 'unknown')}")  # type: ignore  # noqa: E501
                         except Exception as e:
                             logger.error(f"[MessageProcessor] Failed to send message: {str(e)}")
                             logger.error(traceback.format_exc())
@@ -562,6 +627,7 @@ class MessageProcessor:
 
         except asyncio.CancelledError:
             logger.debug("[MessageProcessor] Send handler cancelled")
+            raise
         except Exception as e:
             logger.error(f"[MessageProcessor] Fatal error in send handler: {str(e)}")
             logger.error(traceback.format_exc())
@@ -593,6 +659,10 @@ class MessageProcessor:
             # elif message_type == "session_id":
             #     self.session_id = message_data.get("session_id")
             #     logger.info(f"[MessageProcessor] Session ID: {self.session_id}")
+            elif message_type == "add_device":
+                await self._handle_device_manage(message_data, "add")
+            elif message_type == "remove_device":
+                await self._handle_device_manage(message_data, "remove")
             elif message_type == "request_restart":
                 await self._handle_request_restart(message_data)
             else:
@@ -608,6 +678,24 @@ class MessageProcessor:
         if host_node:
             host_node.handle_pong_response(pong_data)
 
+    def _check_action_always_free(self, device_id: str, action_name: str) -> bool:
+        """检查该action是否标记为always_free，通过HostNode统一的_action_value_mappings查找"""
+        try:
+            host_node = HostNode.get_instance(0)
+            if not host_node:
+                return False
+            # noinspection PyProtectedMember
+            action_mappings = host_node._action_value_mappings.get(device_id)
+            if not action_mappings:
+                return False
+            # 尝试直接匹配或 auto- 前缀匹配
+            for key in [action_name, f"auto-{action_name}"]:
+                if key in action_mappings:
+                    return action_mappings[key].get("always_free", False)
+            return False
+        except Exception:
+            return False
+
     async def _handle_query_action_state(self, data: Dict[str, Any]):
         """处理query_action_state消息"""
         device_id = data.get("device_id", "")
@@ -622,6 +710,9 @@ class MessageProcessor:
 
         device_action_key = f"/devices/{device_id}/{action_name}"
 
+        # 检查action是否为always_free
+        action_always_free = self._check_action_always_free(device_id, action_name)
+
         # 创建任务信息
         job_info = JobInfo(
             job_id=job_id,
@@ -631,6 +722,7 @@ class MessageProcessor:
             device_action_key=device_action_key,
             status=JobStatus.QUEUE,
             start_time=time.time(),
+            always_free=action_always_free,
         )
 
         # 添加到设备管理器
@@ -657,6 +749,8 @@ class MessageProcessor:
     async def _handle_job_start(self, data: Dict[str, Any]):
         """处理job_start消息"""
         try:
+            if not data.get("sample_material"):
+                data["sample_material"] = {}
             req = JobAddReq(**data)
 
             job_log = format_job_log(req.job_id, req.task_id, req.device_id, req.action)
@@ -688,6 +782,7 @@ class MessageProcessor:
                 queue_item,
                 action_type=req.action_type,
                 action_kwargs=req.action_args,
+                sample_material=req.sample_material,
                 server_info=req.server_info,
             )
 
@@ -904,6 +999,37 @@ class MessageProcessor:
             )
             thread.start()
 
+    async def _handle_device_manage(self, device_list: list[ResourceDictType], action: str):
+        """Handle add_device / remove_device from LabGo server."""
+        if not device_list:
+            return
+
+        for item in device_list:
+            target_node_id = item.get("target_node_id", "host_node")
+
+            def _notify(target_id: str, act: str, cfg: ResourceDictType):
+                try:
+                    host_node = HostNode.get_instance(timeout=5)
+                    if not host_node:
+                        logger.error(f"[DeviceManage] HostNode not available for {act}_device")
+                        return
+                    success = host_node.notify_device_manage(target_id, act, cfg)
+                    if success:
+                        logger.info(f"[DeviceManage] {act}_device completed on {target_id}")
+                    else:
+                        logger.warning(f"[DeviceManage] {act}_device failed on {target_id}")
+                except Exception as e:
+                    logger.error(f"[DeviceManage] Error in {act}_device: {e}")
+                    logger.error(traceback.format_exc())
+
+            thread = threading.Thread(
+                target=_notify,
+                args=(target_node_id, action, item),
+                daemon=True,
+                name=f"DeviceManage-{action}-{item.get('id', '')}",
+            )
+            thread.start()
+
     async def _handle_request_restart(self, data: Dict[str, Any]):
         """
         处理重启请求
@@ -915,10 +1041,9 @@ class MessageProcessor:
         logger.info(f"[MessageProcessor] Received restart request, reason: {reason}, delay: {delay}s")
 
         # 发送确认消息
-        if self.websocket_client:
+        self.send_message(
-            await self.websocket_client.send_message(
+            {"action": "restart_acknowledged", "data": {"reason": reason, "delay": delay}}
-                {"action": "restart_acknowledged", "data": {"reason": reason, "delay": delay}}
+        )
-            )
 
         # 设置全局重启标志
         import unilabos.app.main as main_module
@@ -1020,13 +1145,14 @@ class QueueProcessor:
     def stop(self) -> None:
         """停止队列处理线程"""
         self.is_running = False
+        self.queue_update_event.set()  # 立即唤醒等待中的线程
         if self.thread and self.thread.is_alive():
             self.thread.join(timeout=2)
         logger.info("[QueueProcessor] Stopped")
 
     def _run(self):
         """运行队列处理主循环"""
-        logger.debug("[QueueProcessor] Queue processor started")
+        logger.trace("[QueueProcessor] Queue processor started")
 
         while self.is_running:
             try:
@@ -1120,6 +1246,11 @@ class QueueProcessor:
         logger.debug(f"[QueueProcessor] Sending busy status for {len(queued_jobs)} queued jobs")
 
         for job_info in queued_jobs:
+            # 快照可能已过期：在遍历过程中 end_job() 可能已将此 job 移至 READY，
+            # 此时不应再发送 busy/need_more，否则会覆盖已发出的 free=True 通知
+            if job_info.status != JobStatus.QUEUE:
+                continue
+
             message = {
                 "action": "report_action_state",
                 "data": {
@@ -1236,7 +1367,6 @@ class WebSocketClient(BaseCommunicationClient):
         else:
             url = f"{scheme}://{parsed.netloc}/api/v1/ws/schedule"
 
-        logger.debug(f"[WebSocketClient] URL: {url}")
         return url
 
     def start(self) -> None:
@@ -1249,13 +1379,11 @@ class WebSocketClient(BaseCommunicationClient):
             logger.error("[WebSocketClient] WebSocket URL not configured")
             return
 
-        logger.info(f"[WebSocketClient] Starting connection to {self.websocket_url}")
-
         # 启动两个核心线程
         self.message_processor.start()
         self.queue_processor.start()
 
-        logger.info("[WebSocketClient] All threads started")
+        logger.trace("[WebSocketClient] All threads started")
 
     def stop(self) -> None:
         """停止WebSocket客户端"""
@@ -1271,8 +1399,8 @@ class WebSocketClient(BaseCommunicationClient):
                 message = {"action": "normal_exit", "data": {"session_id": session_id}}
                 self.message_processor.send_message(message)
                 logger.info(f"[WebSocketClient] Sent normal_exit message with session_id: {session_id}")
-                # 给一点时间让消息发送出去
+                # send_handler 每100ms检查一次队列，等300ms足以让消息发出
-                time.sleep(1)
+                time.sleep(0.3)
             except Exception as e:
                 logger.warning(f"[WebSocketClient] Failed to send normal_exit message: {str(e)}")
 
@@ -1304,7 +1432,7 @@ class WebSocketClient(BaseCommunicationClient):
             },
         }
         self.message_processor.send_message(message)
-        logger.trace(f"[WebSocketClient] Device status published: {device_id}.{property_name}")
+        # logger.trace(f"[WebSocketClient] Device status published: {device_id}.{property_name}")
 
     def publish_job_status(
         self, feedback_data: dict, item: QueueItem, status: str, return_info: Optional[dict] = None

unilabos/compile/pump_protocol.py

@@ -95,8 +95,29 @@ def get_vessel_liquid_volume(G: nx.DiGraph, vessel: str) -> float:
     return total_volume
 
 
-def is_integrated_pump(node_name):
+def is_integrated_pump(node_class: str, node_name: str = "") -> bool:
-    return "pump" in node_name and "valve" in node_name
+    """
+    判断是否为泵阀一体设备
+    """
+    class_lower = (node_class or "").lower()
+    name_lower = (node_name or "").lower()
+
+    if "pump" not in class_lower and "pump" not in name_lower:
+        return False
+
+    integrated_markers = [
+        "valve",
+        "pump_valve",
+        "pumpvalve",
+        "integrated",
+        "transfer_pump",
+    ]
+
+    for marker in integrated_markers:
+        if marker in class_lower or marker in name_lower:
+            return True
+
+    return False
 
 
 def find_connected_pump(G, valve_node):
@@ -186,7 +207,9 @@ def build_pump_valve_maps(G, pump_backbone):
     debug_print(f"🔧 过滤后的骨架: {filtered_backbone}")
 
     for node in filtered_backbone:
-        if is_integrated_pump(G.nodes[node]["class"]):
+        node_data = G.nodes.get(node, {})
+        node_class = node_data.get("class", "") or ""
+        if is_integrated_pump(node_class, node):
             pumps_from_node[node] = node
             valve_from_node[node] = node
             debug_print(f"  - 集成泵-阀: {node}")

unilabos/config/config.py

@@ -23,6 +23,8 @@ class BasicConfig:
     disable_browser = False  # 禁止浏览器自动打开
     port = 8002  # 本地HTTP服务
     check_mode = False  # CI 检查模式，用于验证 registry 导入和文件一致性
+    test_mode = False  # 测试模式，所有动作不实际执行，返回模拟结果
+    extra_resource = False  # 是否加载lab_开头的额外资源
     # 'TRACE', 'DEBUG', 'INFO', 'WARNING', 'ERROR', 'CRITICAL'
     log_level: Literal["TRACE", "DEBUG", "INFO", "WARNING", "ERROR", "CRITICAL"] = "DEBUG"
 
@@ -39,7 +41,7 @@ class BasicConfig:
 class WSConfig:
     reconnect_interval = 5  # 重连间隔（秒）
     max_reconnect_attempts = 999  # 最大重连次数
-    ping_interval = 30  # ping间隔（秒）
+    ping_interval = 20  # ping间隔（秒）
 
 
 # HTTP配置
@@ -145,5 +147,5 @@ def load_config(config_path=None):
             traceback.print_exc()
             exit(1)
     else:
-        config_path = os.path.join(os.path.dirname(__file__), "local_config.py")
+        config_path = os.path.join(os.path.dirname(__file__), "example_config.py")
         load_config(config_path)

unilabos/device_comms/universal_driver.py

@@ -1,4 +1,3 @@
-
 from abc import abstractmethod
 from functools import wraps
 import inspect

unilabos/devices/liquid_handling/prcxi/prcxi.py

@@ -30,9 +30,32 @@ from pylabrobot.liquid_handling.standard import (
     ResourceMove,
     ResourceDrop,
 )
-from pylabrobot.resources import ResourceHolder, ResourceStack, Tip, Deck, Plate, Well, TipRack, Resource, Container, Coordinate, TipSpot, Trash, PlateAdapter, TubeRack
+from pylabrobot.resources import (
+    ResourceHolder,
+    ResourceStack,
+    Tip,
+    Deck,
+    Plate,
+    Well,
+    TipRack,
+    Resource,
+    Container,
+    Coordinate,
+    TipSpot,
+    Trash,
+    PlateAdapter,
+    TubeRack,
+)
 
-from unilabos.devices.liquid_handling.liquid_handler_abstract import LiquidHandlerAbstract, SimpleReturn
+from unilabos.devices.liquid_handling.liquid_handler_abstract import (
+    LiquidHandlerAbstract,
+    SimpleReturn,
+    SetLiquidReturn,
+    SetLiquidFromPlateReturn,
+    TransferLiquidReturn,
+)
+from unilabos.registry.placeholder_type import ResourceSlot
+from unilabos.resources.resource_tracker import ResourceTreeSet
 from unilabos.ros.nodes.base_device_node import BaseROS2DeviceNode
 
 
@@ -68,19 +91,103 @@ class PRCXI9300Deck(Deck):
     该类定义了 PRCXI 9300 的工作台布局和槽位信息。
     """
 
-    def __init__(self, name: str, size_x: float, size_y: float, size_z: float, **kwargs):
+    # T1-T16 默认位置 (4列×4行)
-        super().__init__(name, size_x, size_y, size_z)
+    _DEFAULT_SITE_POSITIONS = [
-        self.slots = [None] * 16  # PRCXI 9300/9320 最大有 16 个槽位
+        (0, 0, 0), (138, 0, 0), (276, 0, 0), (414, 0, 0),         # T1-T4
-        self.slot_locations = [Coordinate(0, 0, 0)] * 16
+        (0, 96, 0), (138, 96, 0), (276, 96, 0), (414, 96, 0),     # T5-T8
+        (0, 192, 0), (138, 192, 0), (276, 192, 0), (414, 192, 0), # T9-T12
+        (0, 288, 0), (138, 288, 0), (276, 288, 0), (414, 288, 0), # T13-T16
+    ]
+    _DEFAULT_SITE_SIZE = {"width": 128.0, "height": 86, "depth": 0}
+    _DEFAULT_CONTENT_TYPE = ["plate", "tip_rack", "plates", "tip_racks", "tube_rack", "adaptor"]
+
+    def __init__(self, name: str, size_x: float, size_y: float, size_z: float,
+                 sites: Optional[List[Dict[str, Any]]] = None, **kwargs):
+        super().__init__(size_x, size_y, size_z, name)
+        if sites is not None:
+            self.sites: List[Dict[str, Any]] = [dict(s) for s in sites]
+        else:
+            self.sites = []
+            for i, (x, y, z) in enumerate(self._DEFAULT_SITE_POSITIONS):
+                self.sites.append({
+                    "label": f"T{i + 1}",
+                    "visible": True,
+                    "position": {"x": x, "y": y, "z": z},
+                    "size": dict(self._DEFAULT_SITE_SIZE),
+                    "content_type": list(self._DEFAULT_CONTENT_TYPE),
+                })
+        # _ordering: label -> None, 用于外部通过 list(keys()).index(site) 将 Tn 转换为 spot index
+        self._ordering = collections.OrderedDict(
+            (site["label"], None) for site in self.sites
+        )
+
+    def _get_site_location(self, idx: int) -> Coordinate:
+        pos = self.sites[idx]["position"]
+        return Coordinate(pos["x"], pos["y"], pos["z"])
+
+    def _get_site_resource(self, idx: int) -> Optional[Resource]:
+        site_loc = self._get_site_location(idx)
+        for child in self.children:
+            if child.location == site_loc:
+                return child
+        return None
+
+    def assign_child_resource(
+        self,
+        resource: Resource,
+        location: Optional[Coordinate] = None,
+        reassign: bool = True,
+        spot: Optional[int] = None,
+    ):
+        idx = spot
+        if spot is not None:
+            idx = spot
+        else:
+            for i, site in enumerate(self.sites):
+                site_loc = self._get_site_location(i)
+                if site.get("label") == resource.name:
+                    idx = i
+                    break
+                if location is not None and site_loc == location:
+                    idx = i
+                    break
+
+        if idx is None:
+            for i in range(len(self.sites)):
+                if self._get_site_resource(i) is None:
+                    idx = i
+                    break
+
+        if idx is None:
+            raise ValueError(f"No available site on deck '{self.name}' for resource '{resource.name}'")
+
+        if not reassign and self._get_site_resource(idx) is not None:
+            raise ValueError(f"Site {idx} ('{self.sites[idx]['label']}') is already occupied")
+
+        loc = self._get_site_location(idx)
+        super().assign_child_resource(resource, location=loc, reassign=reassign)
 
     def assign_child_at_slot(self, resource: Resource, slot: int, reassign: bool = False) -> None:
-        if self.slots[slot - 1] is not None and not reassign:
+        self.assign_child_resource(resource, spot=slot - 1, reassign=reassign)
-            raise ValueError(f"Spot {slot} is already occupied")
 
-        self.slots[slot - 1] = resource
+    def serialize(self) -> dict:
-        super().assign_child_resource(resource, location=self.slot_locations[slot - 1])
+        data = super().serialize()
+        sites_out = []
+        for i, site in enumerate(self.sites):
+            occupied = self._get_site_resource(i)
+            sites_out.append({
+                "label": site["label"],
+                "visible": site.get("visible", True),
+                "occupied_by": occupied.name if occupied is not None else None,
+                "position": site["position"],
+                "size": site["size"],
+                "content_type": site["content_type"],
+            })
+        data["sites"] = sites_out
+        return data
 
-class PRCXI9300Container(Plate):
+
+class PRCXI9300Container(Container):
     """PRCXI 9300 的专用 Container 类，继承自 Plate，用于槽位定位和未知模块。
 
     该类定义了 PRCXI 9300 的工作台布局和槽位信息。
@@ -93,11 +200,10 @@ class PRCXI9300Container(Plate):
         size_y: float,
         size_z: float,
         category: str,
-        ordering: collections.OrderedDict,
         model: Optional[str] = None,
         **kwargs,
     ):
-        super().__init__(name, size_x, size_y, size_z, category=category, ordering=ordering, model=model)
+        super().__init__(name, size_x, size_y, size_z, category=category, model=model)
         self._unilabos_state = {}
 
     def load_state(self, state: Dict[str, Any]) -> None:
@@ -108,74 +214,81 @@ class PRCXI9300Container(Plate):
     def serialize_state(self) -> Dict[str, Dict[str, Any]]:
         data = super().serialize_state()
         data.update(self._unilabos_state)
-        return data   
+        return data
+
+
 class PRCXI9300Plate(Plate):
-    """ 
+    """
     专用孔板类：
     1. 继承自 PLR 原生 Plate，保留所有物理特性。
     2. 增加 material_info 参数，用于在初始化时直接绑定 Unilab UUID。
     """
-    def __init__(self, name: str, size_x: float, size_y: float, size_z: float, 
+
-                 category: str = "plate", 
+    def __init__(
-                 ordered_items: collections.OrderedDict = None, 
+        self,
-                 ordering: Optional[collections.OrderedDict] = None,
+        name: str,
-                 model: Optional[str] = None, 
+        size_x: float,
-                 material_info: Optional[Dict[str, Any]] = None, 
+        size_y: float,
-                 **kwargs):
+        size_z: float,
+        category: str = "plate",
+        ordered_items: collections.OrderedDict = None,
+        ordering: Optional[collections.OrderedDict] = None,
+        model: Optional[str] = None,
+        material_info: Optional[Dict[str, Any]] = None,
+        **kwargs,
+    ):
         # 如果 ordered_items 不为 None，直接使用
+        items = None
+        ordering_param = None
         if ordered_items is not None:
             items = ordered_items
         elif ordering is not None:
             # 检查 ordering 中的值是否是字符串（从 JSON 反序列化时的情况）
             # 如果是字符串，说明这是位置名称，需要让 Plate 自己创建 Well 对象
             # 我们只传递位置信息（键），不传递值，使用 ordering 参数
-            if ordering and isinstance(next(iter(ordering.values()), None), str):
+            if ordering:
-                # ordering 的值是字符串，只使用键（位置信息）创建新的 OrderedDict
+                values = list(ordering.values())
-                # 传递 ordering 参数而不是 ordered_items，让 Plate 自己创建 Well 对象
+                value = values[0]
-                items = None
+                if isinstance(value, str):
-                # 使用 ordering 参数，只包含位置信息（键）
+                    # ordering 的值是字符串，只使用键（位置信息）创建新的 OrderedDict
-                ordering_param = collections.OrderedDict((k, None) for k in ordering.keys())
+                    # 传递 ordering 参数而不是 ordered_items，让 Plate 自己创建 Well 对象
+                    items = None
+                    # 使用 ordering 参数，只包含位置信息（键）
+                    ordering_param = collections.OrderedDict((k, None) for k in ordering.keys())
+                elif value is None:
+                    ordering_param = ordering
             else:
                 # ordering 的值已经是对象，可以直接使用
                 items = ordering
                 ordering_param = None
-        else:
+
-            items = None
-            ordering_param = None
-        
         # 根据情况传递不同的参数
         if items is not None:
-            super().__init__(name, size_x, size_y, size_z, 
+            super().__init__(
-                             ordered_items=items,
+                name, size_x, size_y, size_z, ordered_items=items, category=category, model=model, **kwargs
-                             category=category,
+            )
-                             model=model, **kwargs)
         elif ordering_param is not None:
             # 传递 ordering 参数，让 Plate 自己创建 Well 对象
-            super().__init__(name, size_x, size_y, size_z, 
+            super().__init__(
-                             ordering=ordering_param,
+                name, size_x, size_y, size_z, ordering=ordering_param, category=category, model=model, **kwargs
-                             category=category,
+            )
-                             model=model, **kwargs)
         else:
-            super().__init__(name, size_x, size_y, size_z, 
+            super().__init__(name, size_x, size_y, size_z, category=category, model=model, **kwargs)
-                             category=category,
+
-                             model=model, **kwargs)
-        
         self._unilabos_state = {}
         if material_info:
             self._unilabos_state["Material"] = material_info
-        
 
     def load_state(self, state: Dict[str, Any]) -> None:
         super().load_state(state)
         self._unilabos_state = state
 
-
     def serialize_state(self) -> Dict[str, Dict[str, Any]]:
         try:
             data = super().serialize_state()
         except AttributeError:
             data = {}
-        if hasattr(self, '_unilabos_state') and self._unilabos_state:
+        if hasattr(self, "_unilabos_state") and self._unilabos_state:
             safe_state = {}
             for k, v in self._unilabos_state.items():
                 # 如果是 Material 字典，深入检查
@@ -188,35 +301,45 @@ class PRCXI9300Plate(Plate):
                         else:
                             # 打印日志提醒（可选）
                             # print(f"Warning: Removing non-serializable key {mk} from {self.name}")
-                            pass 
+                            pass
                     safe_state[k] = safe_material
                 # 其他顶层属性也进行类型检查
                 elif isinstance(v, (str, int, float, bool, list, dict, type(None))):
                     safe_state[k] = v
-            
+
             data.update(safe_state)
-        return data            # 其他顶层属性也进行类型检查
+        return data  # 其他顶层属性也进行类型检查
+
+
 class PRCXI9300TipRack(TipRack):
-    """ 专用吸头盒类 """
+    """专用吸头盒类"""
-    def __init__(self, name: str, size_x: float, size_y: float, size_z: float, 
+
-                 category: str = "tip_rack", 
+    def __init__(
-                 ordered_items: collections.OrderedDict = None, 
+        self,
-                 ordering: Optional[collections.OrderedDict] = None,
+        name: str,
-                 model: Optional[str] = None,
+        size_x: float,
-                 material_info: Optional[Dict[str, Any]] = None,
+        size_y: float,
-                 **kwargs):
+        size_z: float,
+        category: str = "tip_rack",
+        ordered_items: collections.OrderedDict = None,
+        ordering: Optional[collections.OrderedDict] = None,
+        model: Optional[str] = None,
+        material_info: Optional[Dict[str, Any]] = None,
+        **kwargs,
+    ):
         # 如果 ordered_items 不为 None，直接使用
         if ordered_items is not None:
             items = ordered_items
         elif ordering is not None:
-            # 检查 ordering 中的值是否是字符串（从 JSON 反序列化时的情况）
+            # 检查 ordering 中的值类型来决定如何处理：
-            # 如果是字符串，说明这是位置名称，需要让 TipRack 自己创建 Tip 对象
+            # - 字符串值（从 JSON 反序列化）: 只用键创建 ordering_param
-            # 我们只传递位置信息（键），不传递值，使用 ordering 参数
+            # - None 值（从第二次往返序列化）: 同样只用键创建 ordering_param
-            if ordering and isinstance(next(iter(ordering.values()), None), str):
+            # - 对象值（已经是实际的 Resource 对象）: 直接作为 ordered_items 使用
-                # ordering 的值是字符串，只使用键（位置信息）创建新的 OrderedDict
+            first_val = next(iter(ordering.values()), None) if ordering else None
+            if not ordering or first_val is None or isinstance(first_val, str):
+                # ordering 的值是字符串或 None，只使用键（位置信息）创建新的 OrderedDict
                 # 传递 ordering 参数而不是 ordered_items，让 TipRack 自己创建 Tip 对象
                 items = None
-                # 使用 ordering 参数，只包含位置信息（键）
                 ordering_param = collections.OrderedDict((k, None) for k in ordering.keys())
             else:
                 # ordering 的值已经是对象，可以直接使用
@@ -225,27 +348,23 @@ class PRCXI9300TipRack(TipRack):
         else:
             items = None
             ordering_param = None
-        
+
         # 根据情况传递不同的参数
         if items is not None:
-            super().__init__(name, size_x, size_y, size_z, 
+            super().__init__(
-                             ordered_items=items,
+                name, size_x, size_y, size_z, ordered_items=items, category=category, model=model, **kwargs
-                             category=category, 
+            )
-                             model=model, **kwargs)
         elif ordering_param is not None:
             # 传递 ordering 参数，让 TipRack 自己创建 Tip 对象
-            super().__init__(name, size_x, size_y, size_z, 
+            super().__init__(
-                             ordering=ordering_param,
+                name, size_x, size_y, size_z, ordering=ordering_param, category=category, model=model, **kwargs
-                             category=category, 
+            )
-                             model=model, **kwargs)
         else:
-            super().__init__(name, size_x, size_y, size_z, 
+            super().__init__(name, size_x, size_y, size_z, category=category, model=model, **kwargs)
-                             category=category, 
-                             model=model, **kwargs)
         self._unilabos_state = {}
         if material_info:
             self._unilabos_state["Material"] = material_info
-            
+
     def load_state(self, state: Dict[str, Any]) -> None:
         super().load_state(state)
         self._unilabos_state = state
@@ -255,7 +374,7 @@ class PRCXI9300TipRack(TipRack):
             data = super().serialize_state()
         except AttributeError:
             data = {}
-        if hasattr(self, '_unilabos_state') and self._unilabos_state:
+        if hasattr(self, "_unilabos_state") and self._unilabos_state:
             safe_state = {}
             for k, v in self._unilabos_state.items():
                 # 如果是 Material 字典，深入检查
@@ -268,26 +387,33 @@ class PRCXI9300TipRack(TipRack):
                         else:
                             # 打印日志提醒（可选）
                             # print(f"Warning: Removing non-serializable key {mk} from {self.name}")
-                            pass 
+                            pass
                     safe_state[k] = safe_material
                 # 其他顶层属性也进行类型检查
                 elif isinstance(v, (str, int, float, bool, list, dict, type(None))):
                     safe_state[k] = v
-            
+
             data.update(safe_state)
         return data
-    
+
+
 class PRCXI9300Trash(Trash):
     """PRCXI 9300 的专用 Trash 类，继承自 Trash。
 
     该类定义了 PRCXI 9300 的工作台布局和槽位信息。
     """
 
-    def __init__(self, name: str, size_x: float, size_y: float, size_z: float, 
+    def __init__(
-                 category: str = "trash", 
+        self,
-                 material_info: Optional[Dict[str, Any]] = None,
+        name: str,
-                 **kwargs):
+        size_x: float,
-        
+        size_y: float,
+        size_z: float,
+        category: str = "trash",
+        material_info: Optional[Dict[str, Any]] = None,
+        **kwargs,
+    ):
+
         if name != "trash":
             print(f"Warning: PRCXI9300Trash usually expects name='trash' for backend logic, but got '{name}'.")
         super().__init__(name, size_x, size_y, size_z, **kwargs)
@@ -306,7 +432,7 @@ class PRCXI9300Trash(Trash):
             data = super().serialize_state()
         except AttributeError:
             data = {}
-        if hasattr(self, '_unilabos_state') and self._unilabos_state:
+        if hasattr(self, "_unilabos_state") and self._unilabos_state:
             safe_state = {}
             for k, v in self._unilabos_state.items():
                 # 如果是 Material 字典，深入检查
@@ -319,42 +445,51 @@ class PRCXI9300Trash(Trash):
                         else:
                             # 打印日志提醒（可选）
                             # print(f"Warning: Removing non-serializable key {mk} from {self.name}")
-                            pass 
+                            pass
                     safe_state[k] = safe_material
                 # 其他顶层属性也进行类型检查
                 elif isinstance(v, (str, int, float, bool, list, dict, type(None))):
                     safe_state[k] = v
-            
+
             data.update(safe_state)
         return data
 
+
 class PRCXI9300TubeRack(TubeRack):
     """
     专用管架类：用于 EP 管架、试管架等。
     继承自 PLR 的 TubeRack，并支持注入 material_info (UUID)。
     """
-    def __init__(self, name: str, size_x: float, size_y: float, size_z: float, 
+
-                 category: str = "tube_rack", 
+    def __init__(
-                 items: Optional[Dict[str, Any]] = None,
+        self,
-                 ordered_items: Optional[OrderedDict] = None,
+        name: str,
-                 ordering: Optional[OrderedDict] = None,
+        size_x: float,
-                 model: Optional[str] = None,
+        size_y: float,
-                 material_info: Optional[Dict[str, Any]] = None, 
+        size_z: float,
-                 **kwargs):
+        category: str = "tube_rack",
-        
+        items: Optional[Dict[str, Any]] = None,
+        ordered_items: Optional[OrderedDict] = None,
+        ordering: Optional[OrderedDict] = None,
+        model: Optional[str] = None,
+        material_info: Optional[Dict[str, Any]] = None,
+        **kwargs,
+    ):
+
         # 如果 ordered_items 不为 None，直接使用
         if ordered_items is not None:
             items_to_pass = ordered_items
             ordering_param = None
         elif ordering is not None:
-            # 检查 ordering 中的值是否是字符串（从 JSON 反序列化时的情况）
+            # 检查 ordering 中的值类型来决定如何处理：
-            # 如果是字符串，说明这是位置名称，需要让 TubeRack 自己创建 Tube 对象
+            # - 字符串值（从 JSON 反序列化）: 只用键创建 ordering_param
-            # 我们只传递位置信息（键），不传递值，使用 ordering 参数
+            # - None 值（从第二次往返序列化）: 同样只用键创建 ordering_param
-            if ordering and isinstance(next(iter(ordering.values()), None), str):
+            # - 对象值（已经是实际的 Resource 对象）: 直接作为 ordered_items 使用
-                # ordering 的值是字符串，只使用键（位置信息）创建新的 OrderedDict
+            first_val = next(iter(ordering.values()), None) if ordering else None
+            if not ordering or first_val is None or isinstance(first_val, str):
+                # ordering 的值是字符串或 None，只使用键（位置信息）创建新的 OrderedDict
                 # 传递 ordering 参数而不是 ordered_items，让 TubeRack 自己创建 Tube 对象
                 items_to_pass = None
-                # 使用 ordering 参数，只包含位置信息（键）
                 ordering_param = collections.OrderedDict((k, None) for k in ordering.keys())
             else:
                 # ordering 的值已经是对象，可以直接使用
@@ -367,24 +502,16 @@ class PRCXI9300TubeRack(TubeRack):
         else:
             items_to_pass = None
             ordering_param = None
-        
+
         # 根据情况传递不同的参数
         if items_to_pass is not None:
-            super().__init__(name, size_x, size_y, size_z, 
+            super().__init__(name, size_x, size_y, size_z, ordered_items=items_to_pass, model=model, **kwargs)
-                             ordered_items=items_to_pass, 
-                             model=model, 
-                             **kwargs)
         elif ordering_param is not None:
             # 传递 ordering 参数，让 TubeRack 自己创建 Tube 对象
-            super().__init__(name, size_x, size_y, size_z, 
+            super().__init__(name, size_x, size_y, size_z, ordering=ordering_param, model=model, **kwargs)
-                             ordering=ordering_param,
-                             model=model, 
-                             **kwargs)
         else:
-            super().__init__(name, size_x, size_y, size_z, 
+            super().__init__(name, size_x, size_y, size_z, model=model, **kwargs)
-                             model=model, 
+
-                             **kwargs)
-        
         self._unilabos_state = {}
         if material_info:
             self._unilabos_state["Material"] = material_info
@@ -394,7 +521,7 @@ class PRCXI9300TubeRack(TubeRack):
             data = super().serialize_state()
         except AttributeError:
             data = {}
-        if hasattr(self, '_unilabos_state') and self._unilabos_state:
+        if hasattr(self, "_unilabos_state") and self._unilabos_state:
             safe_state = {}
             for k, v in self._unilabos_state.items():
                 # 如果是 Material 字典，深入检查
@@ -407,33 +534,41 @@ class PRCXI9300TubeRack(TubeRack):
                         else:
                             # 打印日志提醒（可选）
                             # print(f"Warning: Removing non-serializable key {mk} from {self.name}")
-                            pass 
+                            pass
                     safe_state[k] = safe_material
                 # 其他顶层属性也进行类型检查
                 elif isinstance(v, (str, int, float, bool, list, dict, type(None))):
                     safe_state[k] = v
-            
+
             data.update(safe_state)
         return data
 
+
 class PRCXI9300PlateAdapter(PlateAdapter):
     """
     专用板式适配器类：用于承载 Plate 的底座（如 PCR 适配器、磁吸架等）。
     支持注入 material_info (UUID)。
     """
-    def __init__(self, name: str, size_x: float, size_y: float, size_z: float, 
+
-                 category: str = "plate_adapter", 
+    def __init__(
-                 model: Optional[str] = None,
+        self,
-                 material_info: Optional[Dict[str, Any]] = None, 
+        name: str,
-                 # 参数给予默认值 (标准96孔板尺寸)
+        size_x: float,
-                 adapter_hole_size_x: float = 127.76, 
+        size_y: float,
-                 adapter_hole_size_y: float = 85.48, 
+        size_z: float,
-                 adapter_hole_size_z: float = 10.0, # 假设凹槽深度或板子放置高度
+        category: str = "plate_adapter",
-                 dx: Optional[float] = None,
+        model: Optional[str] = None,
-                 dy: Optional[float] = None,
+        material_info: Optional[Dict[str, Any]] = None,
-                 dz: float = 0.0, # 默认Z轴偏移
+        # 参数给予默认值 (标准96孔板尺寸)
-                 **kwargs):
+        adapter_hole_size_x: float = 127.76,
-        
+        adapter_hole_size_y: float = 85.48,
+        adapter_hole_size_z: float = 10.0,  # 假设凹槽深度或板子放置高度
+        dx: Optional[float] = None,
+        dy: Optional[float] = None,
+        dz: float = 0.0,  # 默认Z轴偏移
+        **kwargs,
+    ):
+
         # 自动居中计算：如果未指定 dx/dy，则根据适配器尺寸和孔尺寸计算居中位置
         if dx is None:
             dx = (size_x - adapter_hole_size_x) / 2
@@ -441,20 +576,20 @@ class PRCXI9300PlateAdapter(PlateAdapter):
             dy = (size_y - adapter_hole_size_y) / 2
 
         super().__init__(
-            name=name, 
+            name=name,
-            size_x=size_x, 
+            size_x=size_x,
-            size_y=size_y, 
+            size_y=size_y,
-            size_z=size_z, 
+            size_z=size_z,
             dx=dx,
             dy=dy,
             dz=dz,
             adapter_hole_size_x=adapter_hole_size_x,
             adapter_hole_size_y=adapter_hole_size_y,
             adapter_hole_size_z=adapter_hole_size_z,
-            model=model, 
+            model=model,
-            **kwargs
+            **kwargs,
         )
-        
+
         self._unilabos_state = {}
         if material_info:
             self._unilabos_state["Material"] = material_info
@@ -464,7 +599,7 @@ class PRCXI9300PlateAdapter(PlateAdapter):
             data = super().serialize_state()
         except AttributeError:
             data = {}
-        if hasattr(self, '_unilabos_state') and self._unilabos_state:
+        if hasattr(self, "_unilabos_state") and self._unilabos_state:
             safe_state = {}
             for k, v in self._unilabos_state.items():
                 # 如果是 Material 字典，深入检查
@@ -477,15 +612,16 @@ class PRCXI9300PlateAdapter(PlateAdapter):
                         else:
                             # 打印日志提醒（可选）
                             # print(f"Warning: Removing non-serializable key {mk} from {self.name}")
-                            pass 
+                            pass
                     safe_state[k] = safe_material
                 # 其他顶层属性也进行类型检查
                 elif isinstance(v, (str, int, float, bool, list, dict, type(None))):
                     safe_state[k] = v
-            
+
             data.update(safe_state)
         return data
 
+
 class PRCXI9300Handler(LiquidHandlerAbstract):
     support_touch_tip = False
 
@@ -498,7 +634,7 @@ class PRCXI9300Handler(LiquidHandlerAbstract):
 
     def __init__(
         self,
-        deck: Deck,
+        deck: PRCXI9300Deck,
         host: str,
         port: int,
         timeout: float,
@@ -512,14 +648,16 @@ class PRCXI9300Handler(LiquidHandlerAbstract):
         is_9320=False,
     ):
         tablets_info = []
-        count = 0
+        for site_id in range(len(deck.sites)):
-        for child in deck.children:
+            child = deck._get_site_resource(site_id)
-            if child.children:
+            # 如果放其他类型的物料，是不可以的
-                if "Material" in child.children[0]._unilabos_state:
+            if hasattr(child, "_unilabos_state") and "Material" in child._unilabos_state:
-                    number = int(child.name.replace("T", ""))
+                number = site_id + 1
-                    tablets_info.append(
+                tablets_info.append(
-                        WorkTablets(Number=number, Code=f"T{number}", Material=child.children[0]._unilabos_state["Material"])
+                    WorkTablets(
+                        Number=number, Code=f"T{number}", Material=child._unilabos_state["Material"]
                     )
+                )
         if is_9320:
             print("当前设备是9320")
         # 始终初始化 step_mode 属性
@@ -538,9 +676,14 @@ class PRCXI9300Handler(LiquidHandlerAbstract):
         super().post_init(ros_node)
         self._unilabos_backend.post_init(ros_node)
 
-    def set_liquid(self, wells: list[Well], liquid_names: list[str], volumes: list[float]) -> SimpleReturn:
+    def set_liquid(self, wells: list[Well], liquid_names: list[str], volumes: list[float]) -> SetLiquidReturn:
         return super().set_liquid(wells, liquid_names, volumes)
 
+    def set_liquid_from_plate(
+        self, plate: ResourceSlot, well_names: list[str], liquid_names: list[str], volumes: list[float]
+    ) -> SetLiquidFromPlateReturn:
+        return super().set_liquid_from_plate(plate, well_names, liquid_names, volumes)
+
     def set_group(self, group_name: str, wells: List[Well], volumes: List[float]):
         return super().set_group(group_name, wells, volumes)
 
@@ -660,7 +803,7 @@ class PRCXI9300Handler(LiquidHandlerAbstract):
         mix_liquid_height: Optional[float] = None,
         delays: Optional[List[int]] = None,
         none_keys: List[str] = [],
-    ):
+    ) -> TransferLiquidReturn:
         return await super().transfer_liquid(
             sources,
             targets,
@@ -799,7 +942,8 @@ class PRCXI9300Handler(LiquidHandlerAbstract):
         return await self._unilabos_backend.shaker_action(time, module_no, amplitude, is_wait)
 
     async def heater_action(self, temperature: float, time: int):
-        return await self._unilabos_backend.heater_action(temperature, time)  
+        return await self._unilabos_backend.heater_action(temperature, time)
+
     async def move_plate(
         self,
         plate: Plate,
@@ -822,10 +966,11 @@ class PRCXI9300Handler(LiquidHandlerAbstract):
             drop_direction,
             pickup_direction,
             pickup_distance_from_top,
-            target_plate_number = to,
+            target_plate_number=to,
             **backend_kwargs,
         )
 
+
 class PRCXI9300Backend(LiquidHandlerBackend):
     """PRCXI 9300 的后端实现，继承自 LiquidHandlerBackend。
 
@@ -878,31 +1023,28 @@ class PRCXI9300Backend(LiquidHandlerBackend):
         self.steps_todo_list.append(step)
         return step
 
-
     async def pick_up_resource(self, pickup: ResourcePickup, **backend_kwargs):
-        
+
-        resource=pickup.resource
+        resource = pickup.resource
-        offset=pickup.offset
+        offset = pickup.offset
-        pickup_distance_from_top=pickup.pickup_distance_from_top
+        pickup_distance_from_top = pickup.pickup_distance_from_top
-        direction=pickup.direction
+        direction = pickup.direction
 
         plate_number = int(resource.parent.name.replace("T", ""))
         is_whole_plate = True
         balance_height = 0
         step = self.api_client.clamp_jaw_pick_up(plate_number, is_whole_plate, balance_height)
-        
+
         self.steps_todo_list.append(step)
         return step
 
     async def drop_resource(self, drop: ResourceDrop, **backend_kwargs):
 
-
         plate_number = None
         target_plate_number = backend_kwargs.get("target_plate_number", None)
         if target_plate_number is not None:
             plate_number = int(target_plate_number.name.replace("T", ""))
 
-
         is_whole_plate = True
         balance_height = 0
         if plate_number is None:
@@ -911,7 +1053,6 @@ class PRCXI9300Backend(LiquidHandlerBackend):
         self.steps_todo_list.append(step)
         return step
 
-
     async def heater_action(self, temperature: float, time: int):
         print(f"\n\nHeater action: temperature={temperature}, time={time}\n\n")
         # return await self.api_client.heater_action(temperature, time)
@@ -968,7 +1109,7 @@ class PRCXI9300Backend(LiquidHandlerBackend):
                 error_code = self.api_client.get_error_code()
                 if error_code:
                     print(f"PRCXI9300 error code detected: {error_code}")
-                
+
                 # 清除错误代码
                 self.api_client.clear_error_code()
                 print("PRCXI9300 error code cleared.")
@@ -976,11 +1117,11 @@ class PRCXI9300Backend(LiquidHandlerBackend):
                 # 执行重置
                 print("Starting PRCXI9300 reset...")
                 self.api_client.call("IAutomation", "Reset")
-                
+
                 # 检查重置状态并等待完成
                 while not self.is_reset_ok:
                     print("Waiting for PRCXI9300 to reset...")
-                    if hasattr(self, '_ros_node') and self._ros_node is not None:
+                    if hasattr(self, "_ros_node") and self._ros_node is not None:
                         await self._ros_node.sleep(1)
                     else:
                         await asyncio.sleep(1)
@@ -998,7 +1139,7 @@ class PRCXI9300Backend(LiquidHandlerBackend):
         """Pick up tips from the specified resource."""
         # INSERT_YOUR_CODE
         # Ensure use_channels is converted to a list of ints if it's an array
-        if hasattr(use_channels, 'tolist'):
+        if hasattr(use_channels, "tolist"):
             _use_channels = use_channels.tolist()
         else:
             _use_channels = list(use_channels) if use_channels is not None else None
@@ -1052,7 +1193,7 @@ class PRCXI9300Backend(LiquidHandlerBackend):
 
     async def drop_tips(self, ops: List[Drop], use_channels: List[int] = None):
         """Pick up tips from the specified resource."""
-        if hasattr(use_channels, 'tolist'):
+        if hasattr(use_channels, "tolist"):
             _use_channels = use_channels.tolist()
         else:
             _use_channels = list(use_channels) if use_channels is not None else None
@@ -1135,7 +1276,7 @@ class PRCXI9300Backend(LiquidHandlerBackend):
         none_keys: List[str] = [],
     ):
         """Mix liquid in the specified resources."""
-        
+
         plate_indexes = []
         for op in targets:
             deck = op.parent.parent.parent
@@ -1178,7 +1319,7 @@ class PRCXI9300Backend(LiquidHandlerBackend):
 
     async def aspirate(self, ops: List[SingleChannelAspiration], use_channels: List[int] = None):
         """Aspirate liquid from the specified resources."""
-        if hasattr(use_channels, 'tolist'):
+        if hasattr(use_channels, "tolist"):
             _use_channels = use_channels.tolist()
         else:
             _use_channels = list(use_channels) if use_channels is not None else None
@@ -1235,7 +1376,7 @@ class PRCXI9300Backend(LiquidHandlerBackend):
 
     async def dispense(self, ops: List[SingleChannelDispense], use_channels: List[int] = None):
         """Dispense liquid into the specified resources."""
-        if hasattr(use_channels, 'tolist'):
+        if hasattr(use_channels, "tolist"):
             _use_channels = use_channels.tolist()
         else:
             _use_channels = list(use_channels) if use_channels is not None else None
@@ -1416,7 +1557,6 @@ class PRCXI9300Api:
                 time.sleep(1)
         return success
 
-
     def call(self, service: str, method: str, params: Optional[list] = None) -> Any:
         payload = json.dumps(
             {"ServiceName": service, "MethodName": method, "Paramters": params or []}, separators=(",", ":")
@@ -1543,7 +1683,7 @@ class PRCXI9300Api:
         assist_fun5: str = "",
         liquid_method: str = "NormalDispense",
         axis: str = "Left",
-        ) -> Dict[str, Any]:
+    ) -> Dict[str, Any]:
         return {
             "StepAxis": axis,
             "Function": "Imbibing",
@@ -1621,7 +1761,7 @@ class PRCXI9300Api:
         assist_fun5: str = "",
         liquid_method: str = "NormalDispense",
         axis: str = "Left",
-        ) -> Dict[str, Any]:
+    ) -> Dict[str, Any]:
         return {
             "StepAxis": axis,
             "Function": "Blending",
@@ -1681,11 +1821,11 @@ class PRCXI9300Api:
             "LiquidDispensingMethod": liquid_method,
         }
 
-    def clamp_jaw_pick_up(self,
+    def clamp_jaw_pick_up(
+        self,
         plate_no: int,
         is_whole_plate: bool,
         balance_height: int,
-
     ) -> Dict[str, Any]:
         return {
             "StepAxis": "ClampingJaw",
@@ -1695,7 +1835,7 @@ class PRCXI9300Api:
             "HoleRow": 1,
             "HoleCol": 1,
             "BalanceHeight": balance_height,
-            "PlateOrHoleNum": f"T{plate_no}"
+            "PlateOrHoleNum": f"T{plate_no}",
         }
 
     def clamp_jaw_drop(
@@ -1703,7 +1843,6 @@ class PRCXI9300Api:
         plate_no: int,
         is_whole_plate: bool,
         balance_height: int,
-
     ) -> Dict[str, Any]:
         return {
             "StepAxis": "ClampingJaw",
@@ -1713,7 +1852,7 @@ class PRCXI9300Api:
             "HoleRow": 1,
             "HoleCol": 1,
             "BalanceHeight": balance_height,
-            "PlateOrHoleNum": f"T{plate_no}"
+            "PlateOrHoleNum": f"T{plate_no}",
         }
 
     def shaker_action(self, time: int, module_no: int, amplitude: int, is_wait: bool):
@@ -1726,6 +1865,7 @@ class PRCXI9300Api:
             "AssistFun4": is_wait,
         }
 
+
 class DefaultLayout:
 
     def __init__(self, product_name: str = "PRCXI9300"):
@@ -2104,7 +2244,9 @@ if __name__ == "__main__":
             size_y=50,
             size_z=10,
             category="tip_rack",
-            ordered_items=collections.OrderedDict({k: f"{child_prefix}_{k}" for k, v in tip_racks["ordering"].items()}),
+            ordered_items=collections.OrderedDict(
+                {k: f"{child_prefix}_{k}" for k, v in tip_racks["ordering"].items()}
+            ),
         )
         tip_rack_serialized = tip_rack.serialize()
         tip_rack_serialized["parent_name"] = deck.name
@@ -2299,43 +2441,37 @@ if __name__ == "__main__":
 
     A = tree_to_list([resource_plr_to_ulab(deck)])
     with open("deck.json", "w", encoding="utf-8") as f:
-        A.insert(0, {
+        A.insert(
-            "id": "PRCXI",
+            0,
-            "name": "PRCXI",
+            {
-            "parent": None,
+                "id": "PRCXI",
-            "type": "device",
+                "name": "PRCXI",
-            "class": "liquid_handler.prcxi",
+                "parent": None,
-            "position": {
+                "type": "device",
-                "x": 0,
+                "class": "liquid_handler.prcxi",
-                "y": 0,
+                "position": {"x": 0, "y": 0, "z": 0},
-                "z": 0
+                "config": {
-            },
+                    "deck": {
-            "config": {
+                        "_resource_child_name": "PRCXI_Deck",
-                "deck": {
+                        "_resource_type": "unilabos.devices.liquid_handling.prcxi.prcxi:PRCXI9300Deck",
-                    "_resource_child_name": "PRCXI_Deck",
+                    },
-                    "_resource_type": "unilabos.devices.liquid_handling.prcxi.prcxi:PRCXI9300Deck"
+                    "host": "192.168.0.121",
+                    "port": 9999,
+                    "timeout": 10.0,
+                    "axis": "Right",
+                    "channel_num": 1,
+                    "setup": False,
+                    "debug": True,
+                    "simulator": True,
+                    "matrix_id": "5de524d0-3f95-406c-86dd-f83626ebc7cb",
+                    "is_9320": True,
                 },
-                "host": "192.168.0.121",
+                "data": {},
-                "port": 9999,
+                "children": ["PRCXI_Deck"],
-                "timeout": 10.0,
-                "axis": "Right",
-                "channel_num": 1,
-                "setup": False,
-                "debug": True,
-                "simulator": True,
-                "matrix_id": "5de524d0-3f95-406c-86dd-f83626ebc7cb",
-                "is_9320": True
             },
-            "data": {},
+        )
-            "children": [
-                "PRCXI_Deck"
-            ]
-        })
         A[1]["parent"] = "PRCXI"
-        json.dump({
+        json.dump({"nodes": A, "links": []}, f, indent=4, ensure_ascii=False)
-            "nodes": A,
-            "links": []
-        }, f, indent=4, ensure_ascii=False)
 
     handler = PRCXI9300Handler(
         deck=deck,
@@ -2377,7 +2513,6 @@ if __name__ == "__main__":
     time.sleep(5)
     os._exit(0)
 
-
     prcxi_api = PRCXI9300Api(host="192.168.0.121", port=9999)
     prcxi_api.list_matrices()
     prcxi_api.get_all_materials()

unilabos/devices/ros_dev/liquid_handler_joint_publisher.py

@@ -19,10 +19,11 @@ from rclpy.node import Node
 import re
 
 class LiquidHandlerJointPublisher(BaseROS2DeviceNode):
-    def __init__(self,resources_config:list, resource_tracker, rate=50, device_id:str = "lh_joint_publisher", **kwargs):
+    def __init__(self,resources_config:list, resource_tracker, rate=50, device_id:str = "lh_joint_publisher", registry_name: str = "lh_joint_publisher", **kwargs):
         super().__init__(
             driver_instance=self,
             device_id=device_id,
+            registry_name=registry_name,
             status_types={},
             action_value_mappings={},
             hardware_interface={},

unilabos/devices/virtual/virtual_transferpump.py

@@ -15,35 +15,35 @@ class VirtualPumpMode(Enum):
 
 class VirtualTransferPump:
     """虚拟转移泵类 - 模拟泵的基本功能，无需实际硬件 🚰"""
-    
+
     _ros_node: BaseROS2DeviceNode
-    
+
     def __init__(self, device_id: str = None, config: dict = None, **kwargs):
         """
         初始化虚拟转移泵
-        
+
         Args:
             device_id: 设备ID
             config: 配置字典，包含max_volume, port等参数
             **kwargs: 其他参数，确保兼容性
         """
         self.device_id = device_id or "virtual_transfer_pump"
-        
+
         # 从config或kwargs中获取参数，确保类型正确
         if config:
-            self.max_volume = float(config.get('max_volume', 25.0))
+            self.max_volume = float(config.get("max_volume", 25.0))
-            self.port = config.get('port', 'VIRTUAL')
+            self.port = config.get("port", "VIRTUAL")
         else:
-            self.max_volume = float(kwargs.get('max_volume', 25.0))
+            self.max_volume = float(kwargs.get("max_volume", 25.0))
-            self.port = kwargs.get('port', 'VIRTUAL')
+            self.port = kwargs.get("port", "VIRTUAL")
-        
+
-        self._transfer_rate = float(kwargs.get('transfer_rate', 0))
+        self._transfer_rate = float(kwargs.get("transfer_rate", 0))
-        self.mode = kwargs.get('mode', VirtualPumpMode.Normal)
+        self.mode = kwargs.get("mode", VirtualPumpMode.Normal)
-        
+
         # 状态变量 - 确保都是正确类型
         self._status = "Idle"
         self._position = 0.0  # float
-        self._max_velocity = 5.0  # float 
+        self._max_velocity = 5.0  # float
         self._current_volume = 0.0  # float
 
         # 🚀 新增：快速模式设置 - 大幅缩短执行时间
@@ -52,14 +52,16 @@ class VirtualTransferPump:
         self._fast_dispense_time = 1.0  # 快速喷射时间（秒）
 
         self.logger = logging.getLogger(f"VirtualTransferPump.{self.device_id}")
-        
+
         print(f"🚰 === 虚拟转移泵 {self.device_id} 已创建 === ✨")
-        print(f"💨 快速模式: {'启用' if self._fast_mode else '禁用'} | 移动时间: {self._fast_move_time}s | 喷射时间: {self._fast_dispense_time}s")
+        print(
+            f"💨 快速模式: {'启用' if self._fast_mode else '禁用'} | 移动时间: {self._fast_move_time}s | 喷射时间: {self._fast_dispense_time}s"
+        )
         print(f"📊 最大容量: {self.max_volume}mL | 端口: {self.port}")
-    
+
     def post_init(self, ros_node: BaseROS2DeviceNode):
         self._ros_node = ros_node
-    
+
     async def initialize(self) -> bool:
         """初始化虚拟泵 🚀"""
         self.logger.info(f"🔧 初始化虚拟转移泵 {self.device_id} ✨")
@@ -68,33 +70,33 @@ class VirtualTransferPump:
         self._current_volume = 0.0
         self.logger.info(f"✅ 转移泵 {self.device_id} 初始化完成 🚰")
         return True
-    
+
     async def cleanup(self) -> bool:
         """清理虚拟泵 🧹"""
         self.logger.info(f"🧹 清理虚拟转移泵 {self.device_id} 🔚")
         self._status = "Idle"
         self.logger.info(f"✅ 转移泵 {self.device_id} 清理完成 💤")
         return True
-    
+
     # 基本属性
     @property
     def status(self) -> str:
         return self._status
-    
+
     @property
     def position(self) -> float:
         """当前柱塞位置 (ml) 📍"""
         return self._position
-    
+
     @property
     def current_volume(self) -> float:
         """当前注射器中的体积 (ml) 💧"""
         return self._current_volume
-    
+
     @property
     def max_velocity(self) -> float:
         return self._max_velocity
-    
+
     @property
     def transfer_rate(self) -> float:
         return self._transfer_rate
@@ -103,17 +105,17 @@ class VirtualTransferPump:
         """设置最大速度 (ml/s) 🌊"""
         self._max_velocity = max(0.1, min(50.0, velocity))  # 限制在合理范围内
         self.logger.info(f"🌊 设置最大速度为 {self._max_velocity} mL/s")
-    
+
     def get_status(self) -> str:
         """获取泵状态 📋"""
         return self._status
-    
+
     async def _simulate_operation(self, duration: float):
         """模拟操作延时 ⏱️"""
         self._status = "Busy"
         await self._ros_node.sleep(duration)
         self._status = "Idle"
-    
+
     def _calculate_duration(self, volume: float, velocity: float = None) -> float:
         """
         计算操作持续时间 ⏰
@@ -121,10 +123,10 @@ class VirtualTransferPump:
         """
         if velocity is None:
             velocity = self._max_velocity
-        
+
         # 📊 计算理论时间（用于日志显示）
         theoretical_duration = abs(volume) / velocity
-        
+
         # 🚀 如果启用快速模式，使用固定的快速时间
         if self._fast_mode:
             # 根据操作类型选择快速时间
@@ -132,13 +134,13 @@ class VirtualTransferPump:
                 actual_duration = self._fast_move_time
             else:  # 很小的操作
                 actual_duration = 0.5
-            
+
             self.logger.debug(f"⚡ 快速模式: 理论时间 {theoretical_duration:.2f}s → 实际时间 {actual_duration:.2f}s")
             return actual_duration
         else:
             # 正常模式使用理论时间
             return theoretical_duration
-    
+
     def _calculate_display_duration(self, volume: float, velocity: float = None) -> float:
         """
         计算显示用的持续时间（用于日志） 📊
@@ -147,16 +149,16 @@ class VirtualTransferPump:
         if velocity is None:
             velocity = self._max_velocity
         return abs(volume) / velocity
-    
+
     # 新的set_position方法 - 专门用于SetPumpPosition动作
     async def set_position(self, position: float, max_velocity: float = None):
         """
         移动到绝对位置 - 专门用于SetPumpPosition动作 🎯
-        
+
         Args:
             position (float): 目标位置 (ml)
             max_velocity (float): 移动速度 (ml/s)
-        
+
         Returns:
             dict: 符合SetPumpPosition.action定义的结果
         """
@@ -164,19 +166,19 @@ class VirtualTransferPump:
             # 验证并转换参数
             target_position = float(position)
             velocity = float(max_velocity) if max_velocity is not None else self._max_velocity
-            
+
             # 限制位置在有效范围内
             target_position = max(0.0, min(float(self.max_volume), target_position))
-            
+
             # 计算移动距离
             volume_to_move = abs(target_position - self._position)
-            
+
             # 📊 计算显示用的时间（用于日志）
             display_duration = self._calculate_display_duration(volume_to_move, velocity)
-            
+
             # ⚡ 计算实际执行时间（快速模式）
             actual_duration = self._calculate_duration(volume_to_move, velocity)
-            
+
             # 🎯 确定操作类型和emoji
             if target_position > self._position:
                 operation_type = "吸液"
@@ -187,28 +189,34 @@ class VirtualTransferPump:
             else:
                 operation_type = "保持"
                 operation_emoji = "📍"
-            
+
             self.logger.info(f"🎯 SET_POSITION: {operation_type} {operation_emoji}")
-            self.logger.info(f"  📍 位置: {self._position:.2f}mL → {target_position:.2f}mL (移动 {volume_to_move:.2f}mL)")
+            self.logger.info(
+                f"  📍 位置: {self._position:.2f}mL → {target_position:.2f}mL (移动 {volume_to_move:.2f}mL)"
+            )
             self.logger.info(f"  🌊 速度: {velocity:.2f} mL/s")
             self.logger.info(f"  ⏰ 预计时间: {display_duration:.2f}s")
-            
+
             if self._fast_mode:
                 self.logger.info(f"  ⚡ 快速模式: 实际用时 {actual_duration:.2f}s")
-            
+
             # 🚀 模拟移动过程
             if volume_to_move > 0.01:  # 只有当移动距离足够大时才显示进度
                 start_position = self._position
                 steps = 5 if actual_duration > 0.5 else 2  # 根据实际时间调整步数
                 step_duration = actual_duration / steps
-                
+
                 self.logger.info(f"🚀 开始{operation_type}... {operation_emoji}")
-                
+
                 for i in range(steps + 1):
                     # 计算当前位置和进度
                     progress = (i / steps) * 100 if steps > 0 else 100
-                    current_pos = start_position + (target_position - start_position) * (i / steps) if steps > 0 else target_position
+                    current_pos = (
-                    
+                        start_position + (target_position - start_position) * (i / steps)
+                        if steps > 0
+                        else target_position
+                    )
+
                     # 更新状态
                     if i < steps:
                         self._status = f"{operation_type}中"
@@ -216,10 +224,10 @@ class VirtualTransferPump:
                     else:
                         self._status = "Idle"
                         status_emoji = "✅"
-                    
+
                     self._position = current_pos
                     self._current_volume = current_pos
-                    
+
                     # 显示进度（每25%或最后一步）
                     if i == 0:
                         self.logger.debug(f"  🔄 {operation_type}开始: {progress:.0f}%")
@@ -227,7 +235,7 @@ class VirtualTransferPump:
                         self.logger.debug(f"  🔄 {operation_type}进度: {progress:.0f}%")
                     elif i == steps:
                         self.logger.info(f"  ✅ {operation_type}完成: {progress:.0f}% | 当前位置: {current_pos:.2f}mL")
-                    
+
                     # 等待一小步时间
                     if i < steps and step_duration > 0:
                         await self._ros_node.sleep(step_duration)
@@ -236,25 +244,27 @@ class VirtualTransferPump:
                 self._position = target_position
                 self._current_volume = target_position
                 self.logger.info(f"  📍 微调完成: {target_position:.2f}mL")
-        
+
             # 确保最终位置准确
             self._position = target_position
             self._current_volume = target_position
             self._status = "Idle"
-            
+
             # 📊 最终状态日志
             if volume_to_move > 0.01:
-                self.logger.info(f"🎉 SET_POSITION 完成! 📍 最终位置: {self._position:.2f}mL | 💧 当前体积: {self._current_volume:.2f}mL")
+                self.logger.info(
-            
+                    f"🎉 SET_POSITION 完成! 📍 最终位置: {self._position:.2f}mL | 💧 当前体积: {self._current_volume:.2f}mL"
+                )
+
             # 返回符合action定义的结果
             return {
                 "success": True,
                 "message": f"✅ 成功移动到位置 {self._position:.2f}mL ({operation_type})",
                 "final_position": self._position,
                 "final_volume": self._current_volume,
-                "operation_type": operation_type
+                "operation_type": operation_type,
             }
-            
+
         except Exception as e:
             error_msg = f"❌ 设置位置失败: {str(e)}"
             self.logger.error(error_msg)
@@ -262,134 +272,136 @@ class VirtualTransferPump:
                 "success": False,
                 "message": error_msg,
                 "final_position": self._position,
-                "final_volume": self._current_volume
+                "final_volume": self._current_volume,
             }
-    
+
     # 其他泵操作方法
     async def pull_plunger(self, volume: float, velocity: float = None):
         """
         拉取柱塞（吸液） 📥
-        
+
         Args:
             volume (float): 要拉取的体积 (ml)
             velocity (float): 拉取速度 (ml/s)
         """
         new_position = min(self.max_volume, self._position + volume)
         actual_volume = new_position - self._position
-        
+
         if actual_volume <= 0:
             self.logger.warning("⚠️ 无法吸液 - 已达到最大容量")
             return
-        
+
         display_duration = self._calculate_display_duration(actual_volume, velocity)
         actual_duration = self._calculate_duration(actual_volume, velocity)
-        
+
         self.logger.info(f"📥 开始吸液: {actual_volume:.2f}mL")
         self.logger.info(f"  📍 位置: {self._position:.2f}mL → {new_position:.2f}mL")
         self.logger.info(f"  ⏰ 预计时间: {display_duration:.2f}s")
-        
+
         if self._fast_mode:
             self.logger.info(f"  ⚡ 快速模式: 实际用时 {actual_duration:.2f}s")
-        
+
         await self._simulate_operation(actual_duration)
-        
+
         self._position = new_position
         self._current_volume = new_position
-        
+
         self.logger.info(f"✅ 吸液完成: {actual_volume:.2f}mL | 💧 当前体积: {self._current_volume:.2f}mL")
 
     async def push_plunger(self, volume: float, velocity: float = None):
         """
         推出柱塞（排液） 📤
-        
+
         Args:
             volume (float): 要推出的体积 (ml)
             velocity (float): 推出速度 (ml/s)
         """
         new_position = max(0, self._position - volume)
         actual_volume = self._position - new_position
-        
+
         if actual_volume <= 0:
             self.logger.warning("⚠️ 无法排液 - 已达到最小容量")
             return
-        
+
         display_duration = self._calculate_display_duration(actual_volume, velocity)
         actual_duration = self._calculate_duration(actual_volume, velocity)
-        
+
         self.logger.info(f"📤 开始排液: {actual_volume:.2f}mL")
         self.logger.info(f"  📍 位置: {self._position:.2f}mL → {new_position:.2f}mL")
         self.logger.info(f"  ⏰ 预计时间: {display_duration:.2f}s")
-        
+
         if self._fast_mode:
             self.logger.info(f"  ⚡ 快速模式: 实际用时 {actual_duration:.2f}s")
-        
+
         await self._simulate_operation(actual_duration)
-        
+
         self._position = new_position
         self._current_volume = new_position
-        
+
         self.logger.info(f"✅ 排液完成: {actual_volume:.2f}mL | 💧 当前体积: {self._current_volume:.2f}mL")
 
     # 便捷操作方法
     async def aspirate(self, volume: float, velocity: float = None):
         """吸液操作 📥"""
         await self.pull_plunger(volume, velocity)
-    
+
     async def dispense(self, volume: float, velocity: float = None):
         """排液操作 📤"""
         await self.push_plunger(volume, velocity)
-    
+
     async def transfer(self, volume: float, aspirate_velocity: float = None, dispense_velocity: float = None):
         """转移操作（先吸后排） 🔄"""
         self.logger.info(f"🔄 开始转移操作: {volume:.2f}mL")
-        
+
         # 吸液
         await self.aspirate(volume, aspirate_velocity)
-        
+
         # 短暂停顿
         self.logger.debug("⏸️ 短暂停顿...")
         await self._ros_node.sleep(0.1)
-        
+
         # 排液
         await self.dispense(volume, dispense_velocity)
-    
+
     async def empty_syringe(self, velocity: float = None):
         """清空注射器"""
         await self.set_position(0, velocity)
-    
+
     async def fill_syringe(self, velocity: float = None):
         """充满注射器"""
         await self.set_position(self.max_volume, velocity)
-    
+
     async def stop_operation(self):
         """停止当前操作"""
         self._status = "Idle"
         self.logger.info("Operation stopped")
-    
+
     # 状态查询方法
     def get_position(self) -> float:
         """获取当前位置"""
         return self._position
-    
+
     def get_current_volume(self) -> float:
         """获取当前体积"""
         return self._current_volume
-    
+
     def get_remaining_capacity(self) -> float:
         """获取剩余容量"""
         return self.max_volume - self._current_volume
-    
+
     def is_empty(self) -> bool:
         """检查是否为空"""
         return self._current_volume <= 0.01  # 允许小量误差
-    
+
     def is_full(self) -> bool:
         """检查是否已满"""
         return self._current_volume >= (self.max_volume - 0.01)  # 允许小量误差
-    
+
     def __str__(self):
-        return f"VirtualTransferPump({self.device_id}: {self._current_volume:.2f}/{self.max_volume} ml, {self._status})"
+        return (
-    
+            f"VirtualTransferPump({self.device_id}: {self._current_volume:.2f}/{self.max_volume} ml, {self._status})"
+        )
+
     def __repr__(self):
         return self.__str__()
 
@@ -398,20 +410,20 @@ class VirtualTransferPump:
 async def demo():
     """虚拟泵使用示例"""
     pump = VirtualTransferPump("demo_pump", {"max_volume": 50.0})
-    
+
     await pump.initialize()
-    
+
     print(f"Initial state: {pump}")
-    
+
     # 测试set_position方法
     result = await pump.set_position(10.0, max_velocity=2.0)
     print(f"Set position result: {result}")
     print(f"After setting position to 10ml: {pump}")
-    
+
     # 吸液测试
     await pump.aspirate(5.0, velocity=2.0)
     print(f"After aspirating 5ml: {pump}")
-    
+
     # 清空测试
     result = await pump.set_position(0.0)
     print(f"Empty result: {result}")

unilabos/devices/virtual/workbench.py

@@ -1,58 +1,72 @@
 """
 Virtual Workbench Device - 模拟工作台设备
-包含：
+包含:
 - 1个机械臂 (每次操作3s, 独占锁)
 - 3个加热台 (每次加热10s, 可并行)
 
-工作流程：
+工作流程:
-1. A1-A5 物料同时启动，竞争机械臂
+1. A1-A5 物料同时启动, 竞争机械臂
 2. 机械臂将物料移动到空闲加热台
-3. 加热完成后，机械臂将物料移动到C1-C5
+3. 加热完成后, 机械臂将物料移动到C1-C5
 
-注意：调用来自线程池，使用 threading.Lock 进行同步
+注意: 调用来自线程池, 使用 threading.Lock 进行同步
 """
+
 import logging
 import time
-from typing import Dict, Any, Optional
+from typing import Dict, Any, Optional, List
 from dataclasses import dataclass
 from enum import Enum
 from threading import Lock, RLock
 
 from typing_extensions import TypedDict
 
+from unilabos.registry.decorators import (
+    device, action, ActionInputHandle, ActionOutputHandle, DataSource, topic_config, not_action
+)
 from unilabos.ros.nodes.base_device_node import BaseROS2DeviceNode
-from unilabos.utils.decorator import not_action
+from unilabos.resources.resource_tracker import SampleUUIDsType, LabSample
 
 
 # ============ TypedDict 返回类型定义 ============
 
+
 class MoveToHeatingStationResult(TypedDict):
     """move_to_heating_station 返回类型"""
+
     success: bool
     station_id: int
     material_id: str
     material_number: int
     message: str
+    unilabos_samples: List[LabSample]
 
 
 class StartHeatingResult(TypedDict):
     """start_heating 返回类型"""
+
     success: bool
     station_id: int
     material_id: str
     material_number: int
     message: str
+    unilabos_samples: List[LabSample]
 
 
 class MoveToOutputResult(TypedDict):
     """move_to_output 返回类型"""
+
     success: bool
     station_id: int
     material_id: str
+    output_position: str
+    message: str
+    unilabos_samples: List[LabSample]
 
 
 class PrepareMaterialsResult(TypedDict):
     """prepare_materials 返回类型 - 批量准备物料"""
+
     success: bool
     count: int
     material_1: int  # 物料编号1
@@ -61,20 +75,24 @@ class PrepareMaterialsResult(TypedDict):
     material_4: int  # 物料编号4
     material_5: int  # 物料编号5
     message: str
+    unilabos_samples: List[LabSample]
 
 
 # ============ 状态枚举 ============
 
+
 class HeatingStationState(Enum):
     """加热台状态枚举"""
+
     IDLE = "idle"  # 空闲
-    OCCUPIED = "occupied"  # 已放置物料，等待加热
+    OCCUPIED = "occupied"  # 已放置物料, 等待加热
     HEATING = "heating"  # 加热中
-    COMPLETED = "completed"  # 加热完成，等待取走
+    COMPLETED = "completed"  # 加热完成, 等待取走
 
 
 class ArmState(Enum):
     """机械臂状态枚举"""
+
     IDLE = "idle"  # 空闲
     BUSY = "busy"  # 工作中
 
@@ -82,6 +100,7 @@ class ArmState(Enum):
 @dataclass
 class HeatingStation:
     """加热台数据结构"""
+
     station_id: int
     state: HeatingStationState = HeatingStationState.IDLE
     current_material: Optional[str] = None  # 当前物料 (如 "A1", "A2")
@@ -90,26 +109,31 @@ class HeatingStation:
     heating_progress: float = 0.0
 
 
+@device(
+    id="virtual_workbench",
+    category=["virtual_device"],
+    description="Virtual Workbench with 1 robotic arm and 3 heating stations for concurrent material processing",
+)
 class VirtualWorkbench:
     """
     Virtual Workbench Device - 虚拟工作台设备
 
     模拟一个包含1个机械臂和3个加热台的工作站
-    - 机械臂操作耗时3秒，同一时间只能执行一个操作
+    - 机械臂操作耗时3秒, 同一时间只能执行一个操作
-    - 加热台加热耗时10秒，3个加热台可并行工作
+    - 加热台加热耗时10秒, 3个加热台可并行工作
 
     工作流:
-    1. 物料A1-A5并发启动（线程池），竞争机械臂使用权
+    1. 物料A1-A5并发启动(线程池), 竞争机械臂使用权
-    2. 获取机械臂后，查找空闲加热台
+    2. 获取机械臂后, 查找空闲加热台
-    3. 机械臂将物料放入加热台，开始加热
+    3. 机械臂将物料放入加热台, 开始加热
-    4. 加热完成后，机械臂将物料移动到目标位置Cn
+    4. 加热完成后, 机械臂将物料移动到目标位置Cn
     """
 
     _ros_node: BaseROS2DeviceNode
 
     # 配置常量
-    ARM_OPERATION_TIME: float = 3.0  # 机械臂操作时间(秒)
+    ARM_OPERATION_TIME: float = 2  # 机械臂操作时间(秒)
-    HEATING_TIME: float = 10.0  # 加热时间(秒)
+    HEATING_TIME: float = 60.0  # 加热时间(秒)
     NUM_HEATING_STATIONS: int = 3  # 加热台数量
 
     def __init__(self, device_id: Optional[str] = None, config: Optional[Dict[str, Any]] = None, **kwargs):
@@ -126,24 +150,23 @@ class VirtualWorkbench:
         self.data: Dict[str, Any] = {}
 
         # 从config中获取可配置参数
-        self.ARM_OPERATION_TIME = float(self.config.get("arm_operation_time", 3.0))
+        self.ARM_OPERATION_TIME = float(self.config.get("arm_operation_time", self.ARM_OPERATION_TIME))
-        self.HEATING_TIME = float(self.config.get("heating_time", 10.0))
+        self.HEATING_TIME = float(self.config.get("heating_time", self.HEATING_TIME))
-        self.NUM_HEATING_STATIONS = int(self.config.get("num_heating_stations", 3))
+        self.NUM_HEATING_STATIONS = int(self.config.get("num_heating_stations", self.NUM_HEATING_STATIONS))
 
-        # 机械臂状态和锁 (使用threading.Lock)
+        # 机械臂状态和锁
         self._arm_lock = Lock()
         self._arm_state = ArmState.IDLE
         self._arm_current_task: Optional[str] = None
 
-        # 加热台状态 (station_id -> HeatingStation) - 立即初始化，不依赖initialize()
+        # 加热台状态
         self._heating_stations: Dict[int, HeatingStation] = {
-            i: HeatingStation(station_id=i)
+            i: HeatingStation(station_id=i) for i in range(1, self.NUM_HEATING_STATIONS + 1)
-            for i in range(1, self.NUM_HEATING_STATIONS + 1)
         }
-        self._stations_lock = RLock()  # 可重入锁，保护加热台状态
+        self._stations_lock = RLock()
 
         # 任务追踪
-        self._active_tasks: Dict[str, Dict[str, Any]] = {}  # material_id -> task_info
+        self._active_tasks: Dict[str, Dict[str, Any]] = {}
         self._tasks_lock = Lock()
 
         # 处理其他kwargs参数
@@ -169,7 +192,6 @@ class VirtualWorkbench:
         """初始化虚拟工作台"""
         self.logger.info(f"初始化虚拟工作台 {self.device_id}")
 
-        # 重置加热台状态 (已在__init__中创建，这里重置为初始状态)
         with self._stations_lock:
             for station in self._heating_stations.values():
                 station.state = HeatingStationState.IDLE
@@ -177,15 +199,16 @@ class VirtualWorkbench:
                 station.material_number = None
                 station.heating_progress = 0.0
 
-        # 初始化状态
+        self.data.update(
-        self.data.update({
+            {
-            "status": "Ready",
+                "status": "Ready",
-            "arm_state": ArmState.IDLE.value,
+                "arm_state": ArmState.IDLE.value,
-            "arm_current_task": None,
+                "arm_current_task": None,
-            "heating_stations": self._get_stations_status(),
+                "heating_stations": self._get_stations_status(),
-            "active_tasks_count": 0,
+                "active_tasks_count": 0,
-            "message": "工作台就绪",
+                "message": "工作台就绪",
-        })
+            }
+        )
 
         self.logger.info(f"工作台初始化完成: {self.NUM_HEATING_STATIONS}个加热台就绪")
         return True
@@ -204,12 +227,14 @@ class VirtualWorkbench:
         with self._tasks_lock:
             self._active_tasks.clear()
 
-        self.data.update({
+        self.data.update(
-            "status": "Offline",
+            {
-            "arm_state": ArmState.IDLE.value,
+                "status": "Offline",
-            "heating_stations": {},
+                "arm_state": ArmState.IDLE.value,
-            "message": "工作台已关闭",
+                "heating_stations": {},
-        })
+                "message": "工作台已关闭",
+            }
+        )
         return True
 
     def _get_stations_status(self) -> Dict[int, Dict[str, Any]]:
@@ -227,21 +252,19 @@ class VirtualWorkbench:
 
     def _update_data_status(self, message: Optional[str] = None):
         """更新状态数据"""
-        self.data.update({
+        self.data.update(
-            "arm_state": self._arm_state.value,
+            {
-            "arm_current_task": self._arm_current_task,
+                "arm_state": self._arm_state.value,
-            "heating_stations": self._get_stations_status(),
+                "arm_current_task": self._arm_current_task,
-            "active_tasks_count": len(self._active_tasks),
+                "heating_stations": self._get_stations_status(),
-        })
+                "active_tasks_count": len(self._active_tasks),
+            }
+        )
         if message:
             self.data["message"] = message
 
     def _find_available_heating_station(self) -> Optional[int]:
-        """查找空闲的加热台
+        """查找空闲的加热台"""
-
-        Returns:
-            空闲加热台ID，如果没有则返回None
-        """
         with self._stations_lock:
             for station_id, station in self._heating_stations.items():
                 if station.state == HeatingStationState.IDLE:
@@ -249,23 +272,12 @@ class VirtualWorkbench:
         return None
 
     def _acquire_arm(self, task_description: str) -> bool:
-        """获取机械臂使用权（阻塞直到获取）
+        """获取机械臂使用权(阻塞直到获取)"""
-
-        Args:
-            task_description: 任务描述，用于日志
-
-        Returns:
-            是否成功获取
-        """
         self.logger.info(f"[{task_description}] 等待获取机械臂...")
-
-        # 阻塞等待获取锁
         self._arm_lock.acquire()
-
         self._arm_state = ArmState.BUSY
         self._arm_current_task = task_description
         self._update_data_status(f"机械臂执行: {task_description}")
-
         self.logger.info(f"[{task_description}] 成功获取机械臂使用权")
         return True
 
@@ -278,28 +290,37 @@ class VirtualWorkbench:
         self._update_data_status(f"机械臂已释放 (完成: {task})")
         self.logger.info(f"机械臂已释放 (完成: {task})")
 
+    @action(
+        auto_prefix=True,
+        description="批量准备物料 - 虚拟起始节点, 生成A1-A5物料, 输出5个handle供后续节点使用",
+        handles=[
+            ActionOutputHandle(key="channel_1", data_type="workbench_material",
+                         label="实验1", data_key="material_1", data_source=DataSource.EXECUTOR),
+            ActionOutputHandle(key="channel_2", data_type="workbench_material",
+                         label="实验2", data_key="material_2", data_source=DataSource.EXECUTOR),
+            ActionOutputHandle(key="channel_3", data_type="workbench_material",
+                         label="实验3", data_key="material_3", data_source=DataSource.EXECUTOR),
+            ActionOutputHandle(key="channel_4", data_type="workbench_material",
+                         label="实验4", data_key="material_4", data_source=DataSource.EXECUTOR),
+            ActionOutputHandle(key="channel_5", data_type="workbench_material",
+                         label="实验5", data_key="material_5", data_source=DataSource.EXECUTOR),
+        ],
+    )
     def prepare_materials(
         self,
+        sample_uuids: SampleUUIDsType,
         count: int = 5,
     ) -> PrepareMaterialsResult:
         """
         批量准备物料 - 虚拟起始节点
 
-        作为工作流的起始节点，生成指定数量的物料编号供后续节点使用。
+        作为工作流的起始节点, 生成指定数量的物料编号供后续节点使用。
-        输出5个handle (material_1 ~ material_5)，分别对应实验1~5。
+        输出5个handle (material_1 ~ material_5), 分别对应实验1~5。
-
-        Args:
-            count: 待生成的物料数量，默认5 (生成 A1-A5)
-
-        Returns:
-            PrepareMaterialsResult: 包含 material_1 ~ material_5 用于传递给 move_to_heating_station
         """
-        # 生成物料列表 A1 - A{count}
         materials = [i for i in range(1, count + 1)]
 
         self.logger.info(
-            f"[准备物料] 生成 {count} 个物料: "
+            f"[准备物料] 生成 {count} 个物料: A1-A{count} -> material_1~material_{count}"
-            f"A1-A{count} -> material_1~material_{count}"
         )
 
         return {
@@ -311,29 +332,42 @@ class VirtualWorkbench:
             "material_4": materials[3] if len(materials) > 3 else 0,
             "material_5": materials[4] if len(materials) > 4 else 0,
             "message": f"已准备 {count} 个物料: A1-A{count}",
+            "unilabos_samples": [
+                LabSample(
+                    sample_uuid=sample_uuid,
+                    oss_path="",
+                    extra={"material_uuid": content} if isinstance(content, str) else (content.serialize() if content else {}),
+                )
+                for sample_uuid, content in sample_uuids.items()
+            ],
         }
 
+    @action(
+        auto_prefix=True,
+        description="将物料从An位置移动到空闲加热台, 返回分配的加热台ID",
+        handles=[
+            ActionInputHandle(key="material_input", data_type="workbench_material",
+                        label="物料编号", data_key="material_number", data_source=DataSource.HANDLE),
+            ActionOutputHandle(key="heating_station_output", data_type="workbench_station",
+                         label="加热台ID", data_key="station_id", data_source=DataSource.EXECUTOR),
+            ActionOutputHandle(key="material_number_output", data_type="workbench_material",
+                         label="物料编号", data_key="material_number", data_source=DataSource.EXECUTOR),
+        ],
+    )
     def move_to_heating_station(
         self,
+        sample_uuids: SampleUUIDsType,
         material_number: int,
     ) -> MoveToHeatingStationResult:
         """
         将物料从An位置移动到加热台
 
-        多线程并发调用时，会竞争机械臂使用权，并自动查找空闲加热台
+        多线程并发调用时, 会竞争机械臂使用权, 并自动查找空闲加热台
-
-        Args:
-            material_number: 物料编号 (1-5)
-
-        Returns:
-            MoveToHeatingStationResult: 包含 station_id, material_number 等用于传递给下一个节点
         """
-        # 根据物料编号生成物料ID
         material_id = f"A{material_number}"
         task_desc = f"移动{material_id}到加热台"
         self.logger.info(f"[任务] {task_desc} - 开始执行")
 
-        # 记录任务
         with self._tasks_lock:
             self._active_tasks[material_id] = {
                 "status": "waiting_for_arm",
@@ -341,33 +375,27 @@ class VirtualWorkbench:
             }
 
         try:
-            # 步骤1: 等待获取机械臂使用权(竞争)
             with self._tasks_lock:
                 self._active_tasks[material_id]["status"] = "waiting_for_arm"
             self._acquire_arm(task_desc)
 
-            # 步骤2: 查找空闲加热台
             with self._tasks_lock:
                 self._active_tasks[material_id]["status"] = "finding_station"
             station_id = None
 
-            # 循环等待直到找到空闲加热台
             while station_id is None:
                 station_id = self._find_available_heating_station()
                 if station_id is None:
-                    self.logger.info(f"[{material_id}] 没有空闲加热台，等待中...")
+                    self.logger.info(f"[{material_id}] 没有空闲加热台, 等待中...")
-                    # 释放机械臂，等待后重试
                     self._release_arm()
                     time.sleep(0.5)
                     self._acquire_arm(task_desc)
 
-            # 步骤3: 占用加热台 - 立即标记为OCCUPIED，防止其他任务选择同一加热台
             with self._stations_lock:
                 self._heating_stations[station_id].state = HeatingStationState.OCCUPIED
                 self._heating_stations[station_id].current_material = material_id
                 self._heating_stations[station_id].material_number = material_number
 
-            # 步骤4: 模拟机械臂移动操作 (3秒)
             with self._tasks_lock:
                 self._active_tasks[material_id]["status"] = "arm_moving"
                 self._active_tasks[material_id]["assigned_station"] = station_id
@@ -375,11 +403,11 @@ class VirtualWorkbench:
 
             time.sleep(self.ARM_OPERATION_TIME)
 
-            # 步骤5: 放入加热台完成
             self._update_data_status(f"{material_id}已放入加热台{station_id}")
-            self.logger.info(f"[{material_id}] 已放入加热台{station_id} (用时{self.ARM_OPERATION_TIME}s)")
+            self.logger.info(
+                f"[{material_id}] 已放入加热台{station_id} (用时{self.ARM_OPERATION_TIME}s)"
+            )
 
-            # 释放机械臂
             self._release_arm()
 
             with self._tasks_lock:
@@ -391,6 +419,17 @@ class VirtualWorkbench:
                 "material_id": material_id,
                 "material_number": material_number,
                 "message": f"{material_id}已成功移动到加热台{station_id}",
+                "unilabos_samples": [
+                    LabSample(
+                        sample_uuid=sample_uuid,
+                        oss_path="",
+                        extra=(
+                            {"material_uuid": content}
+                            if isinstance(content, str) else (content.serialize() if content else {})
+                        ),
+                    )
+                    for sample_uuid, content in sample_uuids.items()
+                ],
             }
 
         except Exception as e:
@@ -403,22 +442,42 @@ class VirtualWorkbench:
                 "material_id": material_id,
                 "material_number": material_number,
                 "message": f"移动失败: {str(e)}",
+                "unilabos_samples": [
+                    LabSample(
+                        sample_uuid=sample_uuid,
+                        oss_path="",
+                        extra=(
+                            {"material_uuid": content}
+                            if isinstance(content, str) else (content.serialize() if content else {})
+                        ),
+                    )
+                    for sample_uuid, content in sample_uuids.items()
+                ],
             }
 
+    @action(
+        auto_prefix=True,
+        always_free=True,
+        description="启动指定加热台的加热程序",
+        handles=[
+            ActionInputHandle(key="station_id_input", data_type="workbench_station",
+                        label="加热台ID", data_key="station_id", data_source=DataSource.HANDLE),
+            ActionInputHandle(key="material_number_input", data_type="workbench_material",
+                        label="物料编号", data_key="material_number", data_source=DataSource.HANDLE),
+            ActionOutputHandle(key="heating_done_station", data_type="workbench_station",
+                         label="加热完成-加热台ID", data_key="station_id", data_source=DataSource.EXECUTOR),
+            ActionOutputHandle(key="heating_done_material", data_type="workbench_material",
+                         label="加热完成-物料编号", data_key="material_number", data_source=DataSource.EXECUTOR),
+        ],
+    )
     def start_heating(
         self,
+        sample_uuids: SampleUUIDsType,
         station_id: int,
         material_number: int,
     ) -> StartHeatingResult:
         """
         启动指定加热台的加热程序
-
-        Args:
-            station_id: 加热台ID (1-3)，从 move_to_heating_station 的 handle 传入
-            material_number: 物料编号，从 move_to_heating_station 的 handle 传入
-
-        Returns:
-            StartHeatingResult: 包含 station_id, material_number 等用于传递给下一个节点
         """
         self.logger.info(f"[加热台{station_id}] 开始加热")
 
@@ -429,6 +488,17 @@ class VirtualWorkbench:
                 "material_id": "",
                 "material_number": material_number,
                 "message": f"无效的加热台ID: {station_id}",
+                "unilabos_samples": [
+                    LabSample(
+                        sample_uuid=sample_uuid,
+                        oss_path="",
+                        extra=(
+                            {"material_uuid": content}
+                            if isinstance(content, str) else (content.serialize() if content else {})
+                        ),
+                    )
+                    for sample_uuid, content in sample_uuids.items()
+                ],
             }
 
         with self._stations_lock:
@@ -441,6 +511,17 @@ class VirtualWorkbench:
                     "material_id": "",
                     "material_number": material_number,
                     "message": f"加热台{station_id}上没有物料",
+                    "unilabos_samples": [
+                        LabSample(
+                            sample_uuid=sample_uuid,
+                            oss_path="",
+                            extra=(
+                                {"material_uuid": content}
+                                if isinstance(content, str) else (content.serialize() if content else {})
+                            ),
+                        )
+                        for sample_uuid, content in sample_uuids.items()
+                    ],
                 }
 
             if station.state == HeatingStationState.HEATING:
@@ -450,11 +531,21 @@ class VirtualWorkbench:
                     "material_id": station.current_material,
                     "material_number": material_number,
                     "message": f"加热台{station_id}已经在加热中",
+                    "unilabos_samples": [
+                        LabSample(
+                            sample_uuid=sample_uuid,
+                            oss_path="",
+                            extra=(
+                                {"material_uuid": content}
+                                if isinstance(content, str) else (content.serialize() if content else {})
+                            ),
+                        )
+                        for sample_uuid, content in sample_uuids.items()
+                    ],
                 }
 
             material_id = station.current_material
 
-            # 开始加热
             station.state = HeatingStationState.HEATING
             station.heating_start_time = time.time()
             station.heating_progress = 0.0
@@ -465,10 +556,19 @@ class VirtualWorkbench:
 
         self._update_data_status(f"加热台{station_id}开始加热{material_id}")
 
-        # 模拟加热过程 (10秒)
+        with self._stations_lock:
+            heating_list = [
+                f"加热台{sid}:{s.current_material}"
+                for sid, s in self._heating_stations.items()
+                if s.state == HeatingStationState.HEATING and s.current_material
+            ]
+        self.logger.info(f"[并行加热] 当前同时加热中: {', '.join(heating_list)}")
+
         start_time = time.time()
+        last_countdown_log = start_time
         while True:
             elapsed = time.time() - start_time
+            remaining = max(0.0, self.HEATING_TIME - elapsed)
             progress = min(100.0, (elapsed / self.HEATING_TIME) * 100)
 
             with self._stations_lock:
@@ -476,12 +576,15 @@ class VirtualWorkbench:
 
             self._update_data_status(f"加热台{station_id}加热中: {progress:.1f}%")
 
+            if time.time() - last_countdown_log >= 5.0:
+                self.logger.info(f"[加热台{station_id}] {material_id} 剩余 {remaining:.1f}s")
+                last_countdown_log = time.time()
+
             if elapsed >= self.HEATING_TIME:
                 break
 
             time.sleep(1.0)
 
-        # 加热完成
         with self._stations_lock:
             self._heating_stations[station_id].state = HeatingStationState.COMPLETED
             self._heating_stations[station_id].heating_progress = 100.0
@@ -499,24 +602,39 @@ class VirtualWorkbench:
             "material_id": material_id,
             "material_number": material_number,
             "message": f"加热台{station_id}加热完成",
+            "unilabos_samples": [
+                LabSample(
+                    sample_uuid=sample_uuid,
+                    oss_path="",
+                    extra=(
+                        {"material_uuid": content}
+                        if isinstance(content, str) else (content.serialize() if content else {})
+                    ),
+                )
+                for sample_uuid, content in sample_uuids.items()
+            ],
         }
 
+    @action(
+        auto_prefix=True,
+        description="将物料从加热台移动到输出位置Cn",
+        handles=[
+            ActionInputHandle(key="output_station_input", data_type="workbench_station",
+                        label="加热台ID", data_key="station_id", data_source=DataSource.HANDLE),
+            ActionInputHandle(key="output_material_input", data_type="workbench_material",
+                        label="物料编号", data_key="material_number", data_source=DataSource.HANDLE),
+        ],
+    )
     def move_to_output(
         self,
+        sample_uuids: SampleUUIDsType,
         station_id: int,
         material_number: int,
     ) -> MoveToOutputResult:
         """
         将物料从加热台移动到输出位置Cn
-
-        Args:
-            station_id: 加热台ID (1-3)，从 start_heating 的 handle 传入
-            material_number: 物料编号，从 start_heating 的 handle 传入，用于确定输出位置 Cn
-
-        Returns:
-            MoveToOutputResult: 包含执行结果
         """
-        output_number = material_number  # 物料编号决定输出位置
+        output_number = material_number
 
         if station_id not in self._heating_stations:
             return {
@@ -525,6 +643,17 @@ class VirtualWorkbench:
                 "material_id": "",
                 "output_position": f"C{output_number}",
                 "message": f"无效的加热台ID: {station_id}",
+                "unilabos_samples": [
+                    LabSample(
+                        sample_uuid=sample_uuid,
+                        oss_path="",
+                        extra=(
+                            {"material_uuid": content}
+                            if isinstance(content, str) else (content.serialize() if content else {})
+                        ),
+                    )
+                    for sample_uuid, content in sample_uuids.items()
+                ],
             }
 
         with self._stations_lock:
@@ -538,6 +667,17 @@ class VirtualWorkbench:
                     "material_id": "",
                     "output_position": f"C{output_number}",
                     "message": f"加热台{station_id}上没有物料",
+                    "unilabos_samples": [
+                        LabSample(
+                            sample_uuid=sample_uuid,
+                            oss_path="",
+                            extra=(
+                                {"material_uuid": content}
+                                if isinstance(content, str) else (content.serialize() if content else {})
+                            ),
+                        )
+                        for sample_uuid, content in sample_uuids.items()
+                    ],
                 }
 
             if station.state != HeatingStationState.COMPLETED:
@@ -547,6 +687,17 @@ class VirtualWorkbench:
                     "material_id": material_id,
                     "output_position": f"C{output_number}",
                     "message": f"加热台{station_id}尚未完成加热 (当前状态: {station.state.value})",
+                    "unilabos_samples": [
+                        LabSample(
+                            sample_uuid=sample_uuid,
+                            oss_path="",
+                            extra=(
+                                {"material_uuid": content}
+                                if isinstance(content, str) else (content.serialize() if content else {})
+                            ),
+                        )
+                        for sample_uuid, content in sample_uuids.items()
+                    ],
                 }
 
         output_position = f"C{output_number}"
@@ -558,18 +709,17 @@ class VirtualWorkbench:
                 if material_id in self._active_tasks:
                     self._active_tasks[material_id]["status"] = "waiting_for_arm_output"
 
-            # 获取机械臂
             self._acquire_arm(task_desc)
 
             with self._tasks_lock:
                 if material_id in self._active_tasks:
                     self._active_tasks[material_id]["status"] = "arm_moving_to_output"
 
-            # 模拟机械臂操作 (3秒)
+            self.logger.info(
-            self.logger.info(f"[{material_id}] 机械臂正在从加热台{station_id}取出并移动到{output_position}...")
+                f"[{material_id}] 机械臂正在从加热台{station_id}取出并移动到{output_position}..."
+            )
             time.sleep(self.ARM_OPERATION_TIME)
 
-            # 清空加热台
             with self._stations_lock:
                 self._heating_stations[station_id].state = HeatingStationState.IDLE
                 self._heating_stations[station_id].current_material = None
@@ -577,17 +727,17 @@ class VirtualWorkbench:
                 self._heating_stations[station_id].heating_progress = 0.0
                 self._heating_stations[station_id].heating_start_time = None
 
-            # 释放机械臂
             self._release_arm()
 
-            # 任务完成
             with self._tasks_lock:
                 if material_id in self._active_tasks:
                     self._active_tasks[material_id]["status"] = "completed"
                     self._active_tasks[material_id]["end_time"] = time.time()
 
             self._update_data_status(f"{material_id}已移动到{output_position}")
-            self.logger.info(f"[{material_id}] 已成功移动到{output_position} (用时{self.ARM_OPERATION_TIME}s)")
+            self.logger.info(
+                f"[{material_id}] 已成功移动到{output_position} (用时{self.ARM_OPERATION_TIME}s)"
+            )
 
             return {
                 "success": True,
@@ -595,6 +745,18 @@ class VirtualWorkbench:
                 "material_id": material_id,
                 "output_position": output_position,
                 "message": f"{material_id}已成功移动到{output_position}",
+                "unilabos_samples": [
+                    LabSample(
+                        sample_uuid=sample_uuid,
+                        oss_path="",
+                        extra=(
+                            {"material_uuid": content}
+                            if isinstance(content, str)
+                            else (content.serialize() if content is not None else {})
+                        ),
+                    )
+                    for sample_uuid, content in sample_uuids.items()
+                ],
             }
 
         except Exception as e:
@@ -607,81 +769,106 @@ class VirtualWorkbench:
                 "material_id": "",
                 "output_position": output_position,
                 "message": f"移动失败: {str(e)}",
+                "unilabos_samples": [
+                    LabSample(
+                        sample_uuid=sample_uuid,
+                        oss_path="",
+                        extra=(
+                            {"material_uuid": content}
+                            if isinstance(content, str) else (content.serialize() if content else {})
+                        ),
+                    )
+                    for sample_uuid, content in sample_uuids.items()
+                ],
             }
 
     # ============ 状态属性 ============
 
     @property
+    @topic_config()
     def status(self) -> str:
         return self.data.get("status", "Unknown")
 
     @property
+    @topic_config()
     def arm_state(self) -> str:
         return self._arm_state.value
 
     @property
+    @topic_config()
     def arm_current_task(self) -> str:
         return self._arm_current_task or ""
 
     @property
+    @topic_config()
     def heating_station_1_state(self) -> str:
         with self._stations_lock:
             station = self._heating_stations.get(1)
             return station.state.value if station else "unknown"
 
     @property
+    @topic_config()
     def heating_station_1_material(self) -> str:
         with self._stations_lock:
             station = self._heating_stations.get(1)
             return station.current_material or "" if station else ""
 
     @property
+    @topic_config()
     def heating_station_1_progress(self) -> float:
         with self._stations_lock:
             station = self._heating_stations.get(1)
             return station.heating_progress if station else 0.0
 
     @property
+    @topic_config()
     def heating_station_2_state(self) -> str:
         with self._stations_lock:
             station = self._heating_stations.get(2)
             return station.state.value if station else "unknown"
 
     @property
+    @topic_config()
     def heating_station_2_material(self) -> str:
         with self._stations_lock:
             station = self._heating_stations.get(2)
             return station.current_material or "" if station else ""
 
     @property
+    @topic_config()
     def heating_station_2_progress(self) -> float:
         with self._stations_lock:
             station = self._heating_stations.get(2)
             return station.heating_progress if station else 0.0
 
     @property
+    @topic_config()
     def heating_station_3_state(self) -> str:
         with self._stations_lock:
             station = self._heating_stations.get(3)
             return station.state.value if station else "unknown"
 
     @property
+    @topic_config()
     def heating_station_3_material(self) -> str:
         with self._stations_lock:
             station = self._heating_stations.get(3)
             return station.current_material or "" if station else ""
 
     @property
+    @topic_config()
     def heating_station_3_progress(self) -> float:
         with self._stations_lock:
             station = self._heating_stations.get(3)
             return station.heating_progress if station else 0.0
 
     @property
+    @topic_config()
     def active_tasks_count(self) -> int:
         with self._tasks_lock:
             return len(self._active_tasks)
 
     @property
+    @topic_config()
     def message(self) -> str:
         return self.data.get("message", "")

unilabos/registry/decorators.py

@@ -0,0 +1,614 @@
+"""
+装饰器注册表系统
+
+通过 @device, @action, @resource 装饰器替代 YAML 配置文件来定义设备/动作/资源注册表信息。
+
+Usage:
+    from unilabos.registry.decorators import (
+        device, action, resource,
+        InputHandle, OutputHandle,
+        ActionInputHandle, ActionOutputHandle,
+        HardwareInterface, Side, DataSource,
+    )
+
+    @device(
+        id="solenoid_valve.mock",
+        category=["pump_and_valve"],
+        description="模拟电磁阀设备",
+        handles=[
+            InputHandle(key="in", data_type="fluid", label="in", side=Side.NORTH),
+            OutputHandle(key="out", data_type="fluid", label="out", side=Side.SOUTH),
+        ],
+        hardware_interface=HardwareInterface(
+            name="hardware_interface",
+            read="send_command",
+            write="send_command",
+        ),
+    )
+    class SolenoidValveMock:
+        @action(action_type=EmptyIn)
+        def close(self):
+            ...
+
+        @action(
+            handles=[
+                ActionInputHandle(key="in", data_type="fluid", label="in"),
+                ActionOutputHandle(key="out", data_type="fluid", label="out"),
+            ],
+        )
+        def set_valve_position(self, position):
+            ...
+
+        # 无 @action 装饰器 => auto- 前缀动作
+        def is_open(self):
+            ...
+"""
+
+from enum import Enum
+from functools import wraps
+from typing import Any, Callable, Dict, List, Optional, TypeVar
+
+from pydantic import BaseModel, ConfigDict, Field
+
+F = TypeVar("F", bound=Callable[..., Any])
+
+# ---------------------------------------------------------------------------
+# 枚举
+# ---------------------------------------------------------------------------
+
+
+class Side(str, Enum):
+    """UI 上 Handle 的显示位置"""
+
+    NORTH = "NORTH"
+    SOUTH = "SOUTH"
+    EAST = "EAST"
+    WEST = "WEST"
+
+
+class DataSource(str, Enum):
+    """Handle 的数据来源"""
+
+    HANDLE = "handle"  # 从上游 handle 获取数据 (用于 InputHandle)
+    EXECUTOR = "executor"  # 从执行器输出数据 (用于 OutputHandle)
+
+
+# ---------------------------------------------------------------------------
+# Device / Resource Handle (设备/资源级别端口, 序列化时包含 io_type)
+# ---------------------------------------------------------------------------
+
+
+class _DeviceHandleBase(BaseModel):
+    """设备/资源端口基类 (内部使用)"""
+
+    model_config = ConfigDict(populate_by_name=True)
+
+    key: str = Field(serialization_alias="handler_key")
+    data_type: str
+    label: str
+    side: Optional[Side] = None
+    data_key: Optional[str] = None
+    data_source: Optional[str] = None
+    description: Optional[str] = None
+
+    # 子类覆盖
+    io_type: str = ""
+
+    def to_registry_dict(self) -> Dict[str, Any]:
+        return self.model_dump(by_alias=True, exclude_none=True)
+
+
+class InputHandle(_DeviceHandleBase):
+    """
+    输入端口 (io_type="target"), 用于 @device / @resource handles
+
+    Example:
+        InputHandle(key="in", data_type="fluid", label="in", side=Side.NORTH)
+    """
+
+    io_type: str = "target"
+
+
+class OutputHandle(_DeviceHandleBase):
+    """
+    输出端口 (io_type="source"), 用于 @device / @resource handles
+
+    Example:
+        OutputHandle(key="out", data_type="fluid", label="out", side=Side.SOUTH)
+    """
+
+    io_type: str = "source"
+
+
+# ---------------------------------------------------------------------------
+# Action Handle (动作级别端口, 序列化时不含 io_type, 按类型自动分组)
+# ---------------------------------------------------------------------------
+
+
+class _ActionHandleBase(BaseModel):
+    """动作端口基类 (内部使用)"""
+
+    model_config = ConfigDict(populate_by_name=True)
+
+    key: str = Field(serialization_alias="handler_key")
+    data_type: str
+    label: str
+    side: Optional[Side] = None
+    data_key: Optional[str] = None
+    data_source: Optional[str] = None
+    description: Optional[str] = None
+    io_type: Optional[str] = None  # source/sink (dataflow) or target/source (device-style)
+
+    def to_registry_dict(self) -> Dict[str, Any]:
+        return self.model_dump(by_alias=True, exclude_none=True)
+
+
+class ActionInputHandle(_ActionHandleBase):
+    """
+    动作输入端口, 用于 @action handles, 序列化后归入 "input" 组
+
+    Example:
+        ActionInputHandle(
+            key="material_input", data_type="workbench_material",
+            label="物料编号", data_key="material_number", data_source="handle",
+        )
+    """
+
+    pass
+
+
+class ActionOutputHandle(_ActionHandleBase):
+    """
+    动作输出端口, 用于 @action handles, 序列化后归入 "output" 组
+
+    Example:
+        ActionOutputHandle(
+            key="station_output", data_type="workbench_station",
+            label="加热台ID", data_key="station_id", data_source="executor",
+        )
+    """
+
+    pass
+
+
+# ---------------------------------------------------------------------------
+# HardwareInterface
+# ---------------------------------------------------------------------------
+
+
+class HardwareInterface(BaseModel):
+    """
+    硬件通信接口定义
+
+    描述设备与底层硬件通信的方式 (串口、Modbus 等)。
+
+    Example:
+        HardwareInterface(name="hardware_interface", read="send_command", write="send_command")
+    """
+
+    name: str
+    read: Optional[str] = None
+    write: Optional[str] = None
+    extra_info: Optional[List[str]] = None
+
+
+# ---------------------------------------------------------------------------
+# 全局注册表 -- 记录所有被装饰器标记的类/函数
+# ---------------------------------------------------------------------------
+_registered_devices: Dict[str, type] = {}  # device_id -> class
+_registered_resources: Dict[str, Any] = {}  # resource_id -> class or function
+
+
+def _device_handles_to_list(
+    handles: Optional[List[_DeviceHandleBase]],
+) -> List[Dict[str, Any]]:
+    """将设备/资源 Handle 列表序列化为字典列表 (含 io_type)"""
+    if handles is None:
+        return []
+    return [h.to_registry_dict() for h in handles]
+
+
+def _action_handles_to_dict(
+    handles: Optional[List[_ActionHandleBase]],
+) -> Dict[str, Any]:
+    """
+    将动作 Handle 列表序列化为 {"input": [...], "output": [...]} 格式。
+
+    ActionInputHandle => "input", ActionOutputHandle => "output"
+    """
+    if handles is None:
+        return {}
+    input_list = [h.to_registry_dict() for h in handles if isinstance(h, ActionInputHandle)]
+    output_list = [h.to_registry_dict() for h in handles if isinstance(h, ActionOutputHandle)]
+    result: Dict[str, Any] = {}
+    if input_list:
+        result["input"] = input_list
+    if output_list:
+        result["output"] = output_list
+    return result
+
+
+# ---------------------------------------------------------------------------
+# @device 类装饰器
+# ---------------------------------------------------------------------------
+
+
+# noinspection PyShadowingBuiltins
+def device(
+    id: Optional[str] = None,
+    ids: Optional[List[str]] = None,
+    id_meta: Optional[Dict[str, Dict[str, Any]]] = None,
+    category: Optional[List[str]] = None,
+    description: str = "",
+    display_name: str = "",
+    icon: str = "",
+    version: str = "1.0.0",
+    handles: Optional[List[_DeviceHandleBase]] = None,
+    model: Optional[Dict[str, Any]] = None,
+    device_type: str = "python",
+    hardware_interface: Optional[HardwareInterface] = None,
+):
+    """
+    设备类装饰器
+
+    将类标记为一个 UniLab-OS 设备，并附加注册表元数据。
+
+    支持两种模式:
+      1. 单设备: id="xxx", category=[...]
+      2. 多设备: ids=["id1","id2"], id_meta={"id1":{handles:[...]}, "id2":{...}}
+
+    Args:
+        id: 单设备时的注册表唯一标识
+        ids: 多设备时的 id 列表，与 id_meta 配合使用
+        id_meta: 每个 device_id 的覆盖元数据 (handles/description/icon/model)
+        category: 设备分类标签列表 (必填)
+        description: 设备描述
+        display_name: 人类可读的设备显示名称，缺失时默认使用 id
+        icon: 图标路径
+        version: 版本号
+        handles: 设备端口列表 (单设备或 id_meta 未覆盖时使用)
+        model: 可选的 3D 模型配置
+        device_type: 设备实现类型 ("python" / "ros2")
+        hardware_interface: 硬件通信接口 (HardwareInterface)
+    """
+    # Resolve device ids
+    if ids is not None:
+        device_ids = list(ids)
+        if not device_ids:
+            raise ValueError("@device ids 不能为空")
+        id_meta = id_meta or {}
+    elif id is not None:
+        device_ids = [id]
+        id_meta = {}
+    else:
+        raise ValueError("@device 必须提供 id 或 ids")
+
+    if category is None:
+        raise ValueError("@device category 必填")
+
+    base_meta = {
+        "category": category,
+        "description": description,
+        "display_name": display_name,
+        "icon": icon,
+        "version": version,
+        "handles": _device_handles_to_list(handles),
+        "model": model,
+        "device_type": device_type,
+        "hardware_interface": (hardware_interface.model_dump(exclude_none=True) if hardware_interface else None),
+    }
+
+    def decorator(cls):
+        cls._device_registry_meta = base_meta
+        cls._device_registry_id_meta = id_meta
+        cls._device_registry_ids = device_ids
+
+        for did in device_ids:
+            if did in _registered_devices:
+                raise ValueError(f"@device id 重复: '{did}' 已被 {_registered_devices[did]} 注册")
+            _registered_devices[did] = cls
+
+        return cls
+
+    return decorator
+
+
+# ---------------------------------------------------------------------------
+# @action 方法装饰器
+# ---------------------------------------------------------------------------
+
+# 区分 "用户没传 action_type" 和 "用户传了 None"
+_ACTION_TYPE_UNSET = object()
+
+
+# noinspection PyShadowingNames
+def action(
+    action_type: Any = _ACTION_TYPE_UNSET,
+    goal: Optional[Dict[str, str]] = None,
+    feedback: Optional[Dict[str, str]] = None,
+    result: Optional[Dict[str, str]] = None,
+    handles: Optional[List[_ActionHandleBase]] = None,
+    goal_default: Optional[Dict[str, Any]] = None,
+    placeholder_keys: Optional[Dict[str, str]] = None,
+    always_free: bool = False,
+    is_protocol: bool = False,
+    description: str = "",
+    auto_prefix: bool = False,
+    parent: bool = False,
+):
+    """
+    动作方法装饰器
+
+    标记方法为注册表动作。有三种用法:
+      1. @action(action_type=EmptyIn, ...)  -- 非 auto, 使用指定 ROS Action 类型
+      2. @action()                          -- 非 auto, UniLabJsonCommand (从方法签名生成 schema)
+      3. 不加 @action                       -- auto- 前缀, UniLabJsonCommand
+
+    Protocol 用法:
+      @action(action_type=Add, is_protocol=True)
+      def AddProtocol(self): ...
+      标记该动作为高级协议 (protocol)，运行时通过 ROS Action 路由到
+      protocol generator 执行。action_type 指向 unilabos_msgs 的 Action 类型。
+
+    Args:
+        action_type: ROS Action 消息类型 (如 EmptyIn, SendCmd, HeatChill).
+                     不传/默认 = UniLabJsonCommand (非 auto).
+        goal: Goal 字段映射 (ROS字段名 -> 设备参数名).
+              protocol 模式下可留空，系统自动生成 identity 映射.
+        feedback: Feedback 字段映射
+        result: Result 字段映射
+        handles: 动作端口列表 (ActionInputHandle / ActionOutputHandle)
+        goal_default: Goal 字段默认值映射 (字段名 -> 默认值), 与自动生成的 goal_default 合并
+        placeholder_keys: 参数占位符配置
+        always_free: 是否为永久闲置动作 (不受排队限制)
+        is_protocol: 是否为工作站协议 (protocol)。True 时运行时走 protocol generator 路径。
+        description: 动作描述
+        auto_prefix: 若为 True，动作名使用 auto-{method_name} 形式（与无 @action 时一致）
+        parent: 若为 True，当方法参数为空 (*args, **kwargs) 时，通过 MRO 从父类获取真实方法参数
+    """
+
+    def decorator(func: F) -> F:
+        @wraps(func)
+        def wrapper(*args, **kwargs):
+            return func(*args, **kwargs)
+
+        # action_type 为哨兵值 => 用户没传, 视为 None (UniLabJsonCommand)
+        resolved_type = None if action_type is _ACTION_TYPE_UNSET else action_type
+
+        meta = {
+            "action_type": resolved_type,
+            "goal": goal or {},
+            "feedback": feedback or {},
+            "result": result or {},
+            "handles": _action_handles_to_dict(handles),
+            "goal_default": goal_default or {},
+            "placeholder_keys": placeholder_keys or {},
+            "always_free": always_free,
+            "is_protocol": is_protocol,
+            "description": description,
+            "auto_prefix": auto_prefix,
+            "parent": parent,
+        }
+        wrapper._action_registry_meta = meta  # type: ignore[attr-defined]
+
+        # 设置 _is_always_free 保持与旧 @always_free 装饰器兼容
+        if always_free:
+            wrapper._is_always_free = True  # type: ignore[attr-defined]
+
+        return wrapper  # type: ignore[return-value]
+
+    return decorator
+
+
+def get_action_meta(func) -> Optional[Dict[str, Any]]:
+    """获取方法上的 @action 装饰器元数据"""
+    return getattr(func, "_action_registry_meta", None)
+
+
+def has_action_decorator(func) -> bool:
+    """检查函数是否带有 @action 装饰器"""
+    return hasattr(func, "_action_registry_meta")
+
+
+# ---------------------------------------------------------------------------
+# @resource 类/函数装饰器
+# ---------------------------------------------------------------------------
+
+
+def resource(
+    id: str,
+    category: List[str],
+    description: str = "",
+    icon: str = "",
+    version: str = "1.0.0",
+    handles: Optional[List[_DeviceHandleBase]] = None,
+    model: Optional[Dict[str, Any]] = None,
+    class_type: str = "pylabrobot",
+):
+    """
+    资源类/函数装饰器
+
+    将类或工厂函数标记为一个 UniLab-OS 资源，附加注册表元数据。
+
+    Args:
+        id: 注册表唯一标识 (必填, 不可重复)
+        category: 资源分类标签列表 (必填)
+        description: 资源描述
+        icon: 图标路径
+        version: 版本号
+        handles: 端口列表 (InputHandle / OutputHandle)
+        model: 可选的 3D 模型配置
+        class_type: 资源实现类型 ("python" / "pylabrobot" / "unilabos")
+    """
+
+    def decorator(obj):
+        meta = {
+            "resource_id": id,
+            "category": category,
+            "description": description,
+            "icon": icon,
+            "version": version,
+            "handles": _device_handles_to_list(handles),
+            "model": model,
+            "class_type": class_type,
+        }
+        obj._resource_registry_meta = meta
+
+        if id in _registered_resources:
+            raise ValueError(f"@resource id 重复: '{id}' 已被 {_registered_resources[id]} 注册")
+        _registered_resources[id] = obj
+
+        return obj
+
+    return decorator
+
+
+def get_device_meta(cls, device_id: Optional[str] = None) -> Optional[Dict[str, Any]]:
+    """
+    获取类上的 @device 装饰器元数据。
+
+    当 device_id 存在且类使用 ids+id_meta 时，返回合并后的 meta
+    (base_meta 与 id_meta[device_id] 深度合并)。
+    """
+    base = getattr(cls, "_device_registry_meta", None)
+    if base is None:
+        return None
+    id_meta = getattr(cls, "_device_registry_id_meta", None) or {}
+    if device_id is None or device_id not in id_meta:
+        result = dict(base)
+        ids = getattr(cls, "_device_registry_ids", None)
+        result["device_id"] = device_id if device_id is not None else (ids[0] if ids else None)
+        return result
+
+    overrides = id_meta[device_id]
+    result = dict(base)
+    result["device_id"] = device_id
+    for key in ["handles", "description", "icon", "model"]:
+        if key in overrides:
+            val = overrides[key]
+            if key == "handles" and isinstance(val, list):
+                # handles 必须是 Handle 对象列表
+                result[key] = [h.to_registry_dict() for h in val]
+            else:
+                result[key] = val
+    return result
+
+
+def get_resource_meta(obj) -> Optional[Dict[str, Any]]:
+    """获取对象上的 @resource 装饰器元数据"""
+    return getattr(obj, "_resource_registry_meta", None)
+
+
+def get_all_registered_devices() -> Dict[str, type]:
+    """获取所有已注册的设备类"""
+    return _registered_devices.copy()
+
+
+def get_all_registered_resources() -> Dict[str, Any]:
+    """获取所有已注册的资源"""
+    return _registered_resources.copy()
+
+
+def clear_registry():
+    """清空全局注册表 (用于测试)"""
+    _registered_devices.clear()
+    _registered_resources.clear()
+
+
+# ---------------------------------------------------------------------------
+# topic_config / not_action / always_free 装饰器
+# ---------------------------------------------------------------------------
+
+
+def topic_config(
+    period: Optional[float] = None,
+    print_publish: Optional[bool] = None,
+    qos: Optional[int] = None,
+    name: Optional[str] = None,
+) -> Callable[[F], F]:
+    """
+    Topic发布配置装饰器
+
+    用于装饰 get_{attr_name} 方法或 @property，控制对应属性的ROS topic发布行为。
+
+    Args:
+        period: 发布周期（秒）。None 表示使用默认值 5.0
+        print_publish: 是否打印发布日志。None 表示使用节点默认配置
+        qos: QoS深度配置。None 表示使用默认值 10
+        name: 自定义发布名称。None 表示使用方法名（去掉 get_ 前缀）
+
+    Note:
+        与 @property 连用时，@topic_config 必须放在 @property 下面，
+        这样装饰器执行顺序为：先 topic_config 添加配置，再 property 包装。
+    """
+
+    def decorator(func: F) -> F:
+        @wraps(func)
+        def wrapper(*args, **kwargs):
+            return func(*args, **kwargs)
+
+        wrapper._topic_period = period  # type: ignore[attr-defined]
+        wrapper._topic_print_publish = print_publish  # type: ignore[attr-defined]
+        wrapper._topic_qos = qos  # type: ignore[attr-defined]
+        wrapper._topic_name = name  # type: ignore[attr-defined]
+        wrapper._has_topic_config = True  # type: ignore[attr-defined]
+
+        return wrapper  # type: ignore[return-value]
+
+    return decorator
+
+
+def get_topic_config(func) -> dict:
+    """获取函数上的 topic 配置 (period, print_publish, qos, name)"""
+    if hasattr(func, "_has_topic_config") and getattr(func, "_has_topic_config", False):
+        return {
+            "period": getattr(func, "_topic_period", None),
+            "print_publish": getattr(func, "_topic_print_publish", None),
+            "qos": getattr(func, "_topic_qos", None),
+            "name": getattr(func, "_topic_name", None),
+        }
+    return {}
+
+
+def always_free(func: F) -> F:
+    """
+    标记动作为永久闲置(不受busy队列限制)的装饰器
+
+    被此装饰器标记的 action 方法，在执行时不会受到设备级别的排队限制，
+    任何时候请求都可以立即执行。适用于查询类、状态读取类等轻量级操作。
+    """
+
+    @wraps(func)
+    def wrapper(*args, **kwargs):
+        return func(*args, **kwargs)
+
+    wrapper._is_always_free = True  # type: ignore[attr-defined]
+
+    return wrapper  # type: ignore[return-value]
+
+
+def is_always_free(func) -> bool:
+    """检查函数是否被标记为永久闲置"""
+    return getattr(func, "_is_always_free", False)
+
+
+def not_action(func: F) -> F:
+    """
+    标记方法为非动作的装饰器
+
+    用于装饰 driver 类中的方法，使其在注册表扫描时不被识别为动作。
+    适用于辅助方法、内部工具方法等不应暴露为设备动作的公共方法。
+    """
+
+    @wraps(func)
+    def wrapper(*args, **kwargs):
+        return func(*args, **kwargs)
+
+    wrapper._is_not_action = True  # type: ignore[attr-defined]
+
+    return wrapper  # type: ignore[return-value]
+
+
+def is_not_action(func) -> bool:
+    """检查函数是否被标记为非动作"""
+    return getattr(func, "_is_not_action", False)

unilabos/registry/device_comms/communication_devices.yaml

@@ -96,10 +96,13 @@ serial:
           type: string
         port:
           type: string
+        registry_name:
+          type: string
         resource_tracker:
           type: object
       required:
       - device_id
+      - registry_name
       - port
       type: object
     data:

unilabos/registry/devices/Qone_nmr.yaml

@@ -13,21 +13,18 @@ Qone_nmr:
           description: ''
           properties:
             feedback:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: EmptyIn_Feedback
               type: object
             goal:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: EmptyIn_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
-              required:
-              - return_info
               title: EmptyIn_Result
               type: object
           required:
@@ -71,31 +68,6 @@ Qone_nmr:
           title: monitor_folder_for_new_content参数
           type: object
         type: UniLabJsonCommand
-      auto-post_init:
-        feedback: {}
-        goal: {}
-        goal_default:
-          ros_node: null
-        handles: {}
-        placeholder_keys: {}
-        result: {}
-        schema:
-          description: ''
-          properties:
-            feedback: {}
-            goal:
-              properties:
-                ros_node:
-                  type: string
-              required:
-              - ros_node
-              type: object
-            result: {}
-          required:
-          - goal
-          title: post_init参数
-          type: object
-        type: UniLabJsonCommand
       auto-strings_to_txt:
         feedback: {}
         goal: {}
@@ -138,21 +110,18 @@ Qone_nmr:
           description: ''
           properties:
             feedback:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: EmptyIn_Feedback
               type: object
             goal:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: EmptyIn_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
-              required:
-              - return_info
               title: EmptyIn_Result
               type: object
           required:
@@ -167,32 +136,31 @@ Qone_nmr:
         goal_default:
           string: ''
         handles: {}
-        result: {}
+        placeholder_keys: {}
+        result:
+          return_info: return_info
+          success: success
         schema:
           description: ''
           properties:
             feedback:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: StrSingleInput_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 string:
                   type: string
-              required:
-              - string
               title: StrSingleInput_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
                 success:
                   type: boolean
-              required:
-              - return_info
-              - success
               title: StrSingleInput_Result
               type: object
           required:

unilabos/registry/devices/bioyond_cell.yaml

@@ -22,7 +22,8 @@ bioyond_cell:
               required:
               - xlsx_path
               type: object
-            result: {}
+            result:
+              type: object
           required:
           - goal
           title: auto_batch_outbound_from_xlsx参数
@@ -490,7 +491,9 @@ bioyond_cell:
             goal:
               properties:
                 material_names:
-                  type: string
+                  items:
+                    type: string
+                  type: array
                 type_id:
                   default: 3a190ca0-b2f6-9aeb-8067-547e72c11469
                   type: string
@@ -499,7 +502,8 @@ bioyond_cell:
                   type: string
               required: []
               type: object
-            result: {}
+            result:
+              type: object
           required:
           - goal
           title: create_and_inbound_materials参数
@@ -535,7 +539,8 @@ bioyond_cell:
               - type_id
               - warehouse_name
               type: object
-            result: {}
+            result:
+              type: object
           required:
           - goal
           title: create_material参数
@@ -556,11 +561,16 @@ bioyond_cell:
             goal:
               properties:
                 mappings:
+                  additionalProperties:
+                    type: object
                   type: object
               required:
               - mappings
               type: object
-            result: {}
+            result:
+              items:
+                type: object
+              type: array
           required:
           - goal
           title: create_materials参数
@@ -592,7 +602,8 @@ bioyond_cell:
               required:
               - xlsx_path
               type: object
-            result: {}
+            result:
+              type: object
           required:
           - goal
           title: create_orders参数
@@ -624,7 +635,8 @@ bioyond_cell:
               required:
               - xlsx_path
               type: object
-            result: {}
+            result:
+              type: object
           required:
           - goal
           title: create_orders_v2参数
@@ -665,7 +677,8 @@ bioyond_cell:
               - bottle_type
               - location_code
               type: object
-            result: {}
+            result:
+              type: object
           required:
           - goal
           title: create_sample参数
@@ -718,7 +731,8 @@ bioyond_cell:
                   type: string
               required: []
               type: object
-            result: {}
+            result:
+              type: object
           required:
           - goal
           title: order_list_v2参数
@@ -821,7 +835,8 @@ bioyond_cell:
               required:
               - material_obj
               type: object
-            result: {}
+            result:
+              type: object
           required:
           - goal
           title: report_material_change参数
@@ -875,7 +890,8 @@ bioyond_cell:
               properties: {}
               required: []
               type: object
-            result: {}
+            result:
+              type: object
           required:
           - goal
           title: scheduler_continue参数
@@ -896,7 +912,8 @@ bioyond_cell:
               properties: {}
               required: []
               type: object
-            result: {}
+            result:
+              type: object
           required:
           - goal
           title: scheduler_reset参数
@@ -917,7 +934,8 @@ bioyond_cell:
               properties: {}
               required: []
               type: object
-            result: {}
+            result:
+              type: object
           required:
           - goal
           title: scheduler_start参数
@@ -1362,7 +1380,8 @@ bioyond_cell:
                   type: string
               required: []
               type: object
-            result: {}
+            result:
+              type: object
           required:
           - goal
           title: scheduler_start_and_auto_feeding参数
@@ -1807,7 +1826,8 @@ bioyond_cell:
                   type: string
               required: []
               type: object
-            result: {}
+            result:
+              type: object
           required:
           - goal
           title: scheduler_start_and_auto_feeding_v2参数
@@ -1828,7 +1848,8 @@ bioyond_cell:
               properties: {}
               required: []
               type: object
-            result: {}
+            result:
+              type: object
           required:
           - goal
           title: scheduler_stop参数
@@ -1850,12 +1871,15 @@ bioyond_cell:
               properties:
                 items:
                   items:
+                    additionalProperties:
+                      type: string
                     type: object
                   type: array
               required:
               - items
               type: object
-            result: {}
+            result:
+              type: object
           required:
           - goal
           title: storage_batch_inbound参数
@@ -1884,7 +1908,8 @@ bioyond_cell:
               - material_id
               - location_id
               type: object
-            result: {}
+            result:
+              type: object
           required:
           - goal
           title: storage_inbound参数
@@ -1905,7 +1930,8 @@ bioyond_cell:
               properties: {}
               required: []
               type: object
-            result: {}
+            result:
+              type: object
           required:
           - goal
           title: transfer_1_to_2参数
@@ -1946,7 +1972,8 @@ bioyond_cell:
                   type: integer
               required: []
               type: object
-            result: {}
+            result:
+              type: object
           required:
           - goal
           title: transfer_3_to_2参数
@@ -1983,7 +2010,8 @@ bioyond_cell:
                   type: integer
               required: []
               type: object
-            result: {}
+            result:
+              type: object
           required:
           - goal
           title: transfer_3_to_2_to_1参数
@@ -2007,10 +2035,11 @@ bioyond_cell:
                 ip:
                   type: string
                 port:
-                  type: string
+                  type: integer
               required: []
               type: object
-            result: {}
+            result:
+              type: object
           required:
           - goal
           title: update_push_ip参数
@@ -2039,7 +2068,8 @@ bioyond_cell:
               required:
               - order_code
               type: object
-            result: {}
+            result:
+              type: object
           required:
           - goal
           title: wait_for_order_finish参数
@@ -2072,7 +2102,8 @@ bioyond_cell:
               required:
               - order_code
               type: object
-            result: {}
+            result:
+              type: object
           required:
           - goal
           title: wait_for_order_finish_polling参数
@@ -2104,7 +2135,8 @@ bioyond_cell:
                   type: integer
               required: []
               type: object
-            result: {}
+            result:
+              type: boolean
           required:
           - goal
           title: wait_for_transfer_task参数
@@ -2112,8 +2144,7 @@ bioyond_cell:
         type: UniLabJsonCommand
     module: unilabos.devices.workstation.bioyond_studio.bioyond_cell.bioyond_cell_workstation:BioyondCellWorkstation
     status_types:
-      device_id: String
+      device_id: ''
-      material_info: dict
     type: python
   config_info: []
   description: ''
@@ -2134,11 +2165,7 @@ bioyond_cell:
       properties:
         device_id:
           type: string
-        material_info:
-          type: object
       required:
       - device_id
-      - material_info
       type: object
-  registry_type: device
   version: 1.0.0

unilabos/registry/devices/bioyond_dispensing_station.yaml

@@ -24,7 +24,8 @@ bioyond_dispensing_station:
               required:
               - data
               type: object
-            result: {}
+            result:
+              type: object
           required:
           - goal
           title: brief_step_parameters参数
@@ -53,7 +54,8 @@ bioyond_dispensing_station:
               - report_request
               - used_materials
               type: object
-            result: {}
+            result:
+              type: object
           required:
           - goal
           title: process_order_finish_report参数
@@ -78,7 +80,8 @@ bioyond_dispensing_station:
               required:
               - order_id
               type: object
-            result: {}
+            result:
+              type: object
           required:
           - goal
           title: project_order_report参数
@@ -128,7 +131,8 @@ bioyond_dispensing_station:
               required:
               - workflow_id
               type: object
-            result: {}
+            result:
+              type: object
           required:
           - goal
           title: workflow_sample_locations参数
@@ -144,12 +148,12 @@ bioyond_dispensing_station:
           temperature: temperature
           titration: titration
         goal_default:
-          delay_time: '600'
+          delay_time: null
-          hold_m_name: ''
+          hold_m_name: null
           liquid_material_name: NMP
-          speed: '400'
+          speed: null
-          temperature: '40'
+          temperature: null
-          titration: ''
+          titration: null
         handles:
           input:
           - data_key: titration
@@ -165,20 +169,16 @@ bioyond_dispensing_station:
             handler_key: BATCH_CREATE_RESULT
             io_type: sink
             label: Complete Batch Create Result JSON (contains order_codes and order_ids)
-        result:
+        placeholder_keys: {}
-          return_info: return_info
+        result: {}
         schema:
           description: 批量创建90%10%小瓶投料任务。从计算节点接收titration数据,包含物料名称、主称固体质量、滴定固体质量和滴定溶剂体积。返回的return_info中包含order_codes和order_ids列表。
           properties:
             feedback:
-              properties: {}
-              required: []
               title: BatchCreate9010VialFeedingTasks_Feedback
-              type: object
             goal:
               properties:
                 delay_time:
-                  default: '600'
                   description: 延迟时间(秒),默认600
                   type: string
                 hold_m_name:
@@ -189,11 +189,9 @@ bioyond_dispensing_station:
                   description: 10%物料的液体物料名称,默认为"NMP"
                   type: string
                 speed:
-                  default: '400'
                   description: 搅拌速度,默认400
                   type: string
                 temperature:
-                  default: '40'
                   description: 温度(℃),默认40
                   type: string
                 titration:
@@ -202,21 +200,14 @@ bioyond_dispensing_station:
                   type: string
               required:
               - titration
-              - hold_m_name
               title: BatchCreate9010VialFeedingTasks_Goal
               type: object
             result:
-              properties:
-                return_info:
-                  description: 批量任务创建结果汇总JSON字符串，包含total(总数)、success(成功数)、failed(失败数)、order_codes(任务编码数组)、order_ids(任务ID数组)、details(每个任务的详细信息)
-                  type: string
-              required:
-              - return_info
               title: BatchCreate9010VialFeedingTasks_Result
-              type: object
+              type: string
           required:
           - goal
-          title: BatchCreate9010VialFeedingTasks
+          title: batch_create_90_10_vial_feeding_tasks参数
           type: object
         type: UniLabJsonCommand
       batch_create_diamine_solution_tasks:
@@ -228,11 +219,11 @@ bioyond_dispensing_station:
           speed: speed
           temperature: temperature
         goal_default:
-          delay_time: '600'
+          delay_time: null
           liquid_material_name: NMP
-          solutions: ''
+          solutions: null
-          speed: '400'
+          speed: null
-          temperature: '20'
+          temperature: null
         handles:
           input:
           - data_key: solutions
@@ -248,20 +239,16 @@ bioyond_dispensing_station:
             handler_key: BATCH_CREATE_RESULT
             io_type: sink
             label: Complete Batch Create Result JSON (contains order_codes and order_ids)
-        result:
+        placeholder_keys: {}
-          return_info: return_info
+        result: {}
         schema:
           description: 批量创建二胺溶液配置任务。自动为多个二胺样品创建溶液配置任务，每个任务包含固体物料称量、溶剂添加、搅拌混合等步骤。返回的return_info中包含order_codes和order_ids列表。
           properties:
             feedback:
-              properties: {}
-              required: []
               title: BatchCreateDiamineSolutionTasks_Feedback
-              type: object
             goal:
               properties:
                 delay_time:
-                  default: '600'
                   description: 溶液配置完成后的延迟时间（秒），用于充分混合和溶解，默认600秒
                   type: string
                 liquid_material_name:
@@ -275,11 +262,9 @@ bioyond_dispensing_station:
                     4.5, "solvent_volume": 18}]'
                   type: string
                 speed:
-                  default: '400'
                   description: 搅拌速度（rpm），用于混合溶液，默认400转/分钟
                   type: string
                 temperature:
-                  default: '20'
                   description: 配置温度（℃），溶液配置过程的目标温度，默认20℃（室温）
                   type: string
               required:
@@ -287,17 +272,11 @@ bioyond_dispensing_station:
               title: BatchCreateDiamineSolutionTasks_Goal
               type: object
             result:
-              properties:
-                return_info:
-                  description: 批量任务创建结果汇总JSON字符串，包含total(总数)、success(成功数)、failed(失败数)、order_codes(任务编码数组)、order_ids(任务ID数组)、details(每个任务的详细信息)
-                  type: string
-              required:
-              - return_info
               title: BatchCreateDiamineSolutionTasks_Result
-              type: object
+              type: string
           required:
           - goal
-          title: BatchCreateDiamineSolutionTasks
+          title: batch_create_diamine_solution_tasks参数
           type: object
         type: UniLabJsonCommand
       compute_experiment_design:
@@ -309,7 +288,7 @@ bioyond_dispensing_station:
           wt_percent: wt_percent
         goal_default:
           m_tot: '70'
-          ratio: ''
+          ratio: null
           titration_percent: '0.03'
           wt_percent: '0.25'
         handles:
@@ -338,12 +317,8 @@ bioyond_dispensing_station:
             handler_key: feeding_order
             io_type: sink
             label: Feeding Order Data From Calculation Node
-        result:
+        placeholder_keys: {}
-          feeding_order: feeding_order
+        result: {}
-          return_info: return_info
-          solutions: solutions
-          solvents: solvents
-          titration: titration
         schema:
           description: 计算实验设计，输出solutions/titration/solvents/feeding_order用于后续节点。
           properties:
@@ -356,7 +331,7 @@ bioyond_dispensing_station:
                   type: string
                 ratio:
                   description: 组分摩尔比的对象，保持输入顺序，如{"MDA":1,"BTDA":1}
-                  type: string
+                  type: object
                 titration_percent:
                   default: '0.03'
                   description: 滴定比例(10%部分)
@@ -371,14 +346,23 @@ bioyond_dispensing_station:
             result:
               properties:
                 feeding_order:
+                  items: {}
+                  title: Feeding Order
                   type: array
                 return_info:
+                  title: Return Info
                   type: string
                 solutions:
+                  items: {}
+                  title: Solutions
                   type: array
                 solvents:
+                  additionalProperties: true
+                  title: Solvents
                   type: object
                 titration:
+                  additionalProperties: true
+                  title: Titration
                   type: object
               required:
               - solutions
@@ -386,11 +370,11 @@ bioyond_dispensing_station:
               - solvents
               - feeding_order
               - return_info
-              title: ComputeExperimentDesign_Result
+              title: ComputeExperimentDesignReturn
               type: object
           required:
           - goal
-          title: ComputeExperimentDesign
+          title: compute_experiment_design参数
           type: object
         type: UniLabJsonCommand
       create_90_10_vial_feeding_task:
@@ -444,17 +428,18 @@ bioyond_dispensing_station:
           speed: ''
           temperature: ''
         handles: {}
+        placeholder_keys: {}
         result:
           return_info: return_info
         schema:
           description: ''
           properties:
             feedback:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: DispenStationVialFeed_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 delay_time:
                   type: string
@@ -502,38 +487,13 @@ bioyond_dispensing_station:
                   type: string
                 temperature:
                   type: string
-              required:
-              - order_name
-              - percent_90_1_assign_material_name
-              - percent_90_1_target_weigh
-              - percent_90_2_assign_material_name
-              - percent_90_2_target_weigh
-              - percent_90_3_assign_material_name
-              - percent_90_3_target_weigh
-              - percent_10_1_assign_material_name
-              - percent_10_1_target_weigh
-              - percent_10_1_volume
-              - percent_10_1_liquid_material_name
-              - percent_10_2_assign_material_name
-              - percent_10_2_target_weigh
-              - percent_10_2_volume
-              - percent_10_2_liquid_material_name
-              - percent_10_3_assign_material_name
-              - percent_10_3_target_weigh
-              - percent_10_3_volume
-              - percent_10_3_liquid_material_name
-              - speed
-              - temperature
-              - delay_time
-              - hold_m_name
               title: DispenStationVialFeed_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
-              required:
-              - return_info
               title: DispenStationVialFeed_Result
               type: object
           required:
@@ -564,17 +524,18 @@ bioyond_dispensing_station:
           temperature: ''
           volume: ''
         handles: {}
+        placeholder_keys: {}
         result:
           return_info: return_info
         schema:
           description: ''
           properties:
             feedback:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: DispenStationSolnPrep_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 delay_time:
                   type: string
@@ -594,24 +555,13 @@ bioyond_dispensing_station:
                   type: string
                 volume:
                   type: string
-              required:
-              - order_name
-              - material_name
-              - target_weigh
-              - volume
-              - liquid_material_name
-              - speed
-              - temperature
-              - delay_time
-              - hold_m_name
               title: DispenStationSolnPrep_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
-              required:
-              - return_info
               title: DispenStationSolnPrep_Result
               type: object
           required:
@@ -624,8 +574,8 @@ bioyond_dispensing_station:
         goal: {}
         goal_default: {}
         handles: {}
-        result:
+        placeholder_keys: {}
-          return_info: return_info
+        result: {}
         schema:
           description: 启动调度器 - 启动Bioyond配液站的任务调度器，开始执行队列中的任务
           properties:
@@ -635,12 +585,6 @@ bioyond_dispensing_station:
               required: []
               type: object
             result:
-              properties:
-                return_info:
-                  description: 调度器启动结果，成功返回1，失败返回0
-                  type: integer
-              required:
-              - return_info
               title: scheduler_start结果
               type: object
           required:
@@ -654,8 +598,8 @@ bioyond_dispensing_station:
           target_device_id: target_device_id
           transfer_groups: transfer_groups
         goal_default:
-          target_device_id: ''
+          target_device_id: null
-          transfer_groups: ''
+          transfer_groups: null
         handles: {}
         placeholder_keys:
           target_device_id: unilabos_devices
@@ -671,32 +615,13 @@ bioyond_dispensing_station:
                   type: string
                 transfer_groups:
                   description: 转移任务组列表，每组包含物料名称、目标堆栈和目标库位，可以添加多组
-                  items:
-                    properties:
-                      materials:
-                        description: 物料名称（手动输入，系统将通过RPC查询验证）
-                        type: string
-                      target_sites:
-                        description: 目标库位（手动输入，如"A01"）
-                        type: string
-                      target_stack:
-                        description: 目标堆栈名称（从列表选择）
-                        enum:
-                        - 堆栈1左
-                        - 堆栈1右
-                        - 站内试剂存放堆栈
-                        type: string
-                    required:
-                    - materials
-                    - target_stack
-                    - target_sites
-                    type: object
                   type: array
               required:
               - target_device_id
               - transfer_groups
               type: object
-            result: {}
+            result:
+              type: object
           required:
           - goal
           title: transfer_materials_to_reaction_station参数
@@ -709,9 +634,9 @@ bioyond_dispensing_station:
           check_interval: check_interval
           timeout: timeout
         goal_default:
-          batch_create_result: ''
+          batch_create_result: null
-          check_interval: '10'
+          check_interval: 10
-          timeout: '7200'
+          timeout: 7200
         handles:
           input:
           - data_key: batch_create_result
@@ -727,47 +652,35 @@ bioyond_dispensing_station:
             handler_key: batch_reports_result
             io_type: sink
             label: Batch Order Completion Reports
-        result:
+        placeholder_keys: {}
-          return_info: return_info
+        result: {}
         schema:
           description: 同时等待多个任务完成并获取所有实验报告。从上游batch_create任务接收包含order_codes和order_ids的结果对象，并行监控所有任务状态并返回每个任务的报告。
           properties:
             feedback:
-              properties: {}
-              required: []
               title: WaitForMultipleOrdersAndGetReports_Feedback
-              type: object
             goal:
               properties:
                 batch_create_result:
                   description: 批量创建任务的返回结果对象，包含order_codes和order_ids数组。从上游batch_create节点通过handle传递
                   type: string
                 check_interval:
-                  default: '10'
+                  default: 10
                   description: 检查任务状态的时间间隔（秒），默认每10秒检查一次所有待完成任务
-                  type: string
+                  type: integer
                 timeout:
-                  default: '7200'
+                  default: 7200
                   description: 等待超时时间（秒），默认7200秒（2小时）。超过此时间未完成的任务将标记为timeout
-                  type: string
+                  type: integer
-              required:
+              required: []
-              - batch_create_result
               title: WaitForMultipleOrdersAndGetReports_Goal
               type: object
             result:
-              properties:
-                return_info:
-                  description: 'JSON格式的批量任务完成信息，包含: total(总数), completed(成功数), timeout(超时数),
-                    error(错误数), elapsed_time(总耗时), reports(报告数组，每个元素包含order_code,
-                    order_id, status, completion_status, report, elapsed_time)'
-                  type: string
-              required:
-              - return_info
               title: WaitForMultipleOrdersAndGetReports_Result
               type: object
           required:
           - goal
-          title: WaitForMultipleOrdersAndGetReports
+          title: wait_for_multiple_orders_and_get_reports参数
           type: object
         type: UniLabJsonCommand
     module: unilabos.devices.workstation.bioyond_studio.dispensing_station.dispensing_station:BioyondDispensingStation

unilabos/registry/devices/camera.yaml

@@ -1,78 +0,0 @@
-camera:
-  category:
-  - camera
-  class:
-    action_value_mappings:
-      auto-destroy_node:
-        feedback: {}
-        goal: {}
-        goal_default: {}
-        handles: {}
-        placeholder_keys: {}
-        result: {}
-        schema:
-          description: 用于安全地关闭摄像头设备，释放摄像头资源，停止视频采集和发布服务。调用此函数将清理OpenCV摄像头连接并销毁ROS2节点。
-          properties:
-            feedback: {}
-            goal:
-              properties: {}
-              required: []
-              type: object
-            result: {}
-          required:
-          - goal
-          title: destroy_node参数
-          type: object
-        type: UniLabJsonCommand
-      auto-timer_callback:
-        feedback: {}
-        goal: {}
-        goal_default: {}
-        handles: {}
-        placeholder_keys: {}
-        result: {}
-        schema:
-          description: 定时器回调函数的参数schema。此函数负责定期采集摄像头视频帧，将OpenCV格式的图像转换为ROS Image消息格式，并发布到指定的视频话题。默认以10Hz频率执行，确保视频流的连续性和实时性。
-          properties:
-            feedback: {}
-            goal:
-              properties: {}
-              required: []
-              type: object
-            result: {}
-          required:
-          - goal
-          title: timer_callback参数
-          type: object
-        type: UniLabJsonCommand
-    module: unilabos.ros.nodes.presets.camera:VideoPublisher
-    status_types: {}
-    type: ros2
-  config_info: []
-  description: VideoPublisher摄像头设备节点，用于实时视频采集和流媒体发布。该设备通过OpenCV连接本地摄像头（如USB摄像头、内置摄像头等），定时采集视频帧并将其转换为ROS2的sensor_msgs/Image消息格式发布到视频话题。主要用于实验室自动化系统中的视觉监控、图像分析、实时观察等应用场景。支持可配置的摄像头索引、发布频率等参数。
-  handles: []
-  icon: ''
-  init_param_schema:
-    config:
-      properties:
-        camera_index:
-          default: 0
-          type: string
-        device_id:
-          default: video_publisher
-          type: string
-        device_uuid:
-          default: ''
-          type: string
-        period:
-          default: 0.1
-          type: number
-        resource_tracker:
-          type: object
-      required: []
-      type: object
-    data:
-      properties: {}
-      required: []
-      type: object
-  version: 1.0.0

unilabos/registry/devices/cameraSII.yaml

@@ -18,7 +18,7 @@ cameracontroller_device:
             goal:
               properties:
                 config:
-                  type: string
+                  type: object
               required: []
               type: object
             result: {}
@@ -42,7 +42,8 @@ cameracontroller_device:
               properties: {}
               required: []
               type: object
-            result: {}
+            result:
+              type: object
           required:
           - goal
           title: stop参数
@@ -50,7 +51,7 @@ cameracontroller_device:
         type: UniLabJsonCommand
     module: unilabos.devices.cameraSII.cameraUSB:CameraController
     status_types:
-      status: dict
+      status: Dict[str, Any]
     type: python
   config_info: []
   description: Uni-Lab-OS 摄像头驱动（Linux USB 摄像头版，无 PTZ）
@@ -103,5 +104,4 @@ cameracontroller_device:
       required:
       - status
       type: object
-  registry_type: device
   version: 1.0.0

unilabos/registry/devices/characterization_chromatic.yaml

@@ -141,30 +141,26 @@ hplc.agilent:
           description: ''
           properties:
             feedback:
+              additionalProperties: false
               properties:
                 status:
                   type: string
-              required:
-              - status
               title: SendCmd_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 command:
                   type: string
-              required:
-              - command
               title: SendCmd_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
                 success:
                   type: boolean
-              required:
-              - return_info
-              - success
               title: SendCmd_Result
               type: object
           required:
@@ -175,7 +171,6 @@ hplc.agilent:
     module: unilabos.devices.hplc.AgilentHPLC:HPLCDriver
     status_types:
       could_run: bool
-      data_file: String
       device_status: str
       driver_init_ok: bool
       finish_status: str
@@ -199,10 +194,6 @@ hplc.agilent:
       properties:
         could_run:
           type: boolean
-        data_file:
-          items:
-            type: string
-          type: array
         device_status:
           type: string
         driver_init_ok:
@@ -216,14 +207,13 @@ hplc.agilent:
         success:
           type: boolean
       required:
-      - status_text
-      - device_status
       - could_run
+      - device_status
       - driver_init_ok
-      - is_running
-      - success
       - finish_status
-      - data_file
+      - is_running
+      - status_text
+      - success
       type: object
   version: 1.0.0
 hplc.agilent-zhida:
@@ -236,26 +226,25 @@ hplc.agilent-zhida:
         goal: {}
         goal_default: {}
         handles: {}
-        result: {}
+        placeholder_keys: {}
+        result:
+          return_info: return_info
         schema:
           description: ''
           properties:
             feedback:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: EmptyIn_Feedback
               type: object
             goal:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: EmptyIn_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
-              required:
-              - return_info
               title: EmptyIn_Result
               type: object
           required:
@@ -315,21 +304,18 @@ hplc.agilent-zhida:
           description: ''
           properties:
             feedback:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: EmptyIn_Feedback
               type: object
             goal:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: EmptyIn_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
-              required:
-              - return_info
               title: EmptyIn_Result
               type: object
           required:
@@ -341,35 +327,35 @@ hplc.agilent-zhida:
         feedback: {}
         goal:
           string: string
+          text: text
         goal_default:
           string: ''
         handles: {}
-        result: {}
+        placeholder_keys: {}
+        result:
+          return_info: return_info
+          success: success
         schema:
           description: ''
           properties:
             feedback:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: StrSingleInput_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 string:
                   type: string
-              required:
-              - string
               title: StrSingleInput_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
                 success:
                   type: boolean
-              required:
-              - return_info
-              - success
               title: StrSingleInput_Result
               type: object
           required:
@@ -407,7 +393,7 @@ hplc.agilent-zhida:
         status:
           type: object
       required:
-      - status
       - methods
+      - status
       type: object
   version: 1.0.0

unilabos/registry/devices/characterization_optic.yaml

@@ -120,42 +120,41 @@ raman.home_made:
           type: object
         type: UniLabJsonCommand
       raman_cmd:
-        feedback: {}
+        feedback:
+          status: status
         goal:
           command: command
         goal_default:
           command: ''
         handles: {}
+        placeholder_keys: {}
         result:
+          return_info: return_info
           success: success
         schema:
           description: ''
           properties:
             feedback:
+              additionalProperties: false
               properties:
                 status:
                   type: string
-              required:
-              - status
               title: SendCmd_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 command:
                   type: string
-              required:
-              - command
               title: SendCmd_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
                 success:
                   type: boolean
-              required:
-              - return_info
-              - success
               title: SendCmd_Result
               type: object
           required:

unilabos/registry/devices/chinwe.yaml

@@ -19,7 +19,8 @@ separator.chinwe:
               properties: {}
               required: []
               type: object
-            result: {}
+            result:
+              type: boolean
           required:
           - goal
           title: connect参数
@@ -65,135 +66,145 @@ separator.chinwe:
               required:
               - command_dict
               type: object
-            result: {}
+            result:
+              type: boolean
           required:
           - goal
           title: execute_command_from_outer参数
           type: object
         type: UniLabJsonCommand
       motor_rotate_quarter:
+        feedback: {}
         goal:
           direction: 顺时针
           motor_id: 4
           speed: 60
+        goal_default:
+          direction: 顺时针
+          motor_id: null
+          speed: 60
         handles: {}
+        placeholder_keys: {}
+        result: {}
         schema:
           description: 电机旋转 1/4 圈
           properties:
+            feedback: {}
             goal:
               properties:
                 direction:
                   default: 顺时针
                   description: 旋转方向
-                  enum:
-                  - 顺时针
-                  - 逆时针
                   type: string
                 motor_id:
-                  default: '4'
                   description: 选择电机 (4:搅拌, 5:旋钮)
-                  enum:
+                  type: integer
-                  - '4'
-                  - '5'
-                  type: string
                 speed:
                   default: 60
                   description: 速度 (RPM)
                   type: integer
               required:
               - motor_id
-              - speed
               type: object
+            result: {}
+          required:
+          - goal
+          title: motor_rotate_quarter参数
+          type: object
         type: UniLabJsonCommand
       motor_run_continuous:
+        feedback: {}
         goal:
           direction: 顺时针
           motor_id: 4
           speed: 60
+        goal_default:
+          direction: 顺时针
+          motor_id: null
+          speed: null
         handles: {}
+        placeholder_keys: {}
+        result: {}
         schema:
           description: 电机一直旋转 (速度模式)
           properties:
+            feedback: {}
             goal:
               properties:
                 direction:
                   default: 顺时针
                   description: 旋转方向
-                  enum:
-                  - 顺时针
-                  - 逆时针
                   type: string
                 motor_id:
-                  default: '4'
                   description: 选择电机 (4:搅拌, 5:旋钮)
-                  enum:
+                  type: integer
-                  - '4'
-                  - '5'
-                  type: string
                 speed:
-                  default: 60
                   description: 速度 (RPM)
                   type: integer
               required:
               - motor_id
               - speed
               type: object
+            result: {}
+          required:
+          - goal
+          title: motor_run_continuous参数
+          type: object
         type: UniLabJsonCommand
       motor_stop:
+        feedback: {}
         goal:
           motor_id: 4
+        goal_default:
+          motor_id: null
         handles: {}
+        placeholder_keys: {}
+        result: {}
         schema:
           description: 停止指定步进电机
           properties:
+            feedback: {}
             goal:
               properties:
                 motor_id:
-                  default: '4'
                   description: 选择电机
-                  enum:
-                  - '4'
-                  - '5'
                   title: '注: 4=搅拌, 5=旋钮'
-                  type: string
+                  type: integer
               required:
               - motor_id
               type: object
+            result: {}
+          required:
+          - goal
+          title: motor_stop参数
+          type: object
         type: UniLabJsonCommand
       pump_aspirate:
+        feedback: {}
         goal:
           pump_id: 1
           valve_port: 1
           volume: 1000
+        goal_default:
+          pump_id: null
+          valve_port: null
+          volume: null
         handles: {}
+        placeholder_keys: {}
+        result: {}
         schema:
           description: 注射泵吸液
           properties:
+            feedback: {}
             goal:
               properties:
                 pump_id:
-                  default: '1'
                   description: 选择泵
-                  enum:
+                  type: integer
-                  - '1'
-                  - '2'
-                  - '3'
-                  type: string
                 valve_port:
-                  default: '1'
                   description: 阀门端口
-                  enum:
+                  type: integer
-                  - '1'
-                  - '2'
-                  - '3'
-                  - '4'
-                  - '5'
-                  - '6'
-                  - '7'
-                  - '8'
-                  type: string
                 volume:
-                  default: 1000
                   description: 吸液步数
                   type: integer
               required:
@@ -201,41 +212,38 @@ separator.chinwe:
               - volume
               - valve_port
               type: object
+            result: {}
+          required:
+          - goal
+          title: pump_aspirate参数
+          type: object
         type: UniLabJsonCommand
       pump_dispense:
+        feedback: {}
         goal:
           pump_id: 1
           valve_port: 1
           volume: 1000
+        goal_default:
+          pump_id: null
+          valve_port: null
+          volume: null
         handles: {}
+        placeholder_keys: {}
+        result: {}
         schema:
           description: 注射泵排液
           properties:
+            feedback: {}
             goal:
               properties:
                 pump_id:
-                  default: '1'
                   description: 选择泵
-                  enum:
+                  type: integer
-                  - '1'
-                  - '2'
-                  - '3'
-                  type: string
                 valve_port:
-                  default: '1'
                   description: 阀门端口
-                  enum:
+                  type: integer
-                  - '1'
-                  - '2'
-                  - '3'
-                  - '4'
-                  - '5'
-                  - '6'
-                  - '7'
-                  - '8'
-                  type: string
                 volume:
-                  default: 1000
                   description: 排液步数
                   type: integer
               required:
@@ -243,121 +251,152 @@ separator.chinwe:
               - volume
               - valve_port
               type: object
+            result: {}
+          required:
+          - goal
+          title: pump_dispense参数
+          type: object
         type: UniLabJsonCommand
       pump_initialize:
+        feedback: {}
         goal:
           drain_port: 0
           output_port: 0
           pump_id: 1
           speed: 10
+        goal_default:
+          drain_port: 0
+          output_port: 0
+          pump_id: null
+          speed: 10
         handles: {}
+        placeholder_keys: {}
+        result: {}
         schema:
           description: 初始化指定注射泵
           properties:
+            feedback: {}
             goal:
               properties:
                 drain_port:
                   default: 0
                   description: 排液口索引
-                  type: integer
+                  type: string
                 output_port:
                   default: 0
                   description: 输出口索引
-                  type: integer
-                pump_id:
-                  default: '1'
-                  description: 选择泵
-                  enum:
-                  - '1'
-                  - '2'
-                  - '3'
-                  title: '注: 1号泵, 2号泵, 3号泵'
                   type: string
+                pump_id:
+                  description: 选择泵
+                  title: '注: 1号泵, 2号泵, 3号泵'
+                  type: integer
                 speed:
                   default: 10
                   description: 运动速度
-                  type: integer
+                  type: string
               required:
               - pump_id
               type: object
+            result: {}
+          required:
+          - goal
+          title: pump_initialize参数
+          type: object
         type: UniLabJsonCommand
       pump_valve:
+        feedback: {}
         goal:
           port: 1
           pump_id: 1
+        goal_default:
+          port: null
+          pump_id: null
         handles: {}
+        placeholder_keys: {}
+        result: {}
         schema:
           description: 切换指定泵的阀门端口
           properties:
+            feedback: {}
             goal:
               properties:
                 port:
-                  default: '1'
                   description: 阀门端口号 (1-8)
-                  enum:
+                  type: integer
-                  - '1'
-                  - '2'
-                  - '3'
-                  - '4'
-                  - '5'
-                  - '6'
-                  - '7'
-                  - '8'
-                  type: string
                 pump_id:
-                  default: '1'
                   description: 选择泵
-                  enum:
+                  type: integer
-                  - '1'
-                  - '2'
-                  - '3'
-                  type: string
               required:
               - pump_id
               - port
               type: object
+            result: {}
+          required:
+          - goal
+          title: pump_valve参数
+          type: object
         type: UniLabJsonCommand
       wait_sensor_level:
+        feedback: {}
         goal:
           target_state: 有液
           timeout: 30
+        goal_default:
+          target_state: 有液
+          timeout: 30
         handles: {}
+        placeholder_keys: {}
+        result: {}
         schema:
           description: 等待传感器液位条件
           properties:
+            feedback: {}
             goal:
               properties:
                 target_state:
                   default: 有液
                   description: 目标液位状态
-                  enum:
-                  - 有液
-                  - 无液
                   type: string
                 timeout:
                   default: 30
                   description: 超时时间 (秒)
                   type: integer
-              required:
+              required: []
-              - target_state
               type: object
+            result:
+              type: boolean
+          required:
+          - goal
+          title: wait_sensor_level参数
+          type: object
         type: UniLabJsonCommand
       wait_time:
+        feedback: {}
         goal:
           duration: 10
+        goal_default:
+          duration: null
         handles: {}
+        placeholder_keys: {}
+        result: {}
         schema:
           description: 等待指定时间
           properties:
+            feedback: {}
             goal:
               properties:
                 duration:
-                  default: 10
                   description: 等待时间 (秒)
                   type: integer
               required:
               - duration
               type: object
+            result:
+              type: boolean
+          required:
+          - goal
+          title: wait_time参数
+          type: object
         type: UniLabJsonCommand
     module: unilabos.devices.separator.chinwe:ChinweDevice
     status_types:
@@ -406,8 +445,8 @@ separator.chinwe:
         sensor_rssi:
           type: integer
       required:
+      - is_connected
       - sensor_level
       - sensor_rssi
-      - is_connected
       type: object
   version: 2.1.0

unilabos/registry/devices/coin_cell_workstation.yaml

@@ -64,7 +64,8 @@ coincellassemblyworkstation_device:
               properties: {}
               required: []
               type: object
-            result: {}
+            result:
+              type: boolean
           required:
           - goal
           title: fun_wuliao_test参数
@@ -109,7 +110,8 @@ coincellassemblyworkstation_device:
               - elec_num
               - elec_use_num
               type: object
-            result: {}
+            result:
+              type: object
           required:
           - goal
           title: func_allpack_cmd参数
@@ -220,7 +222,8 @@ coincellassemblyworkstation_device:
               - elec_num
               - elec_use_num
               type: object
-            result: {}
+            result:
+              type: object
           required:
           - goal
           title: func_allpack_cmd_simp参数
@@ -309,7 +312,8 @@ coincellassemblyworkstation_device:
                   type: boolean
               required: []
               type: object
-            result: {}
+            result:
+              type: boolean
           required:
           - goal
           title: func_pack_device_init_auto_start_combined参数
@@ -351,7 +355,8 @@ coincellassemblyworkstation_device:
               properties: {}
               required: []
               type: object
-            result: {}
+            result:
+              type: boolean
           required:
           - goal
           title: func_pack_device_stop参数
@@ -376,7 +381,8 @@ coincellassemblyworkstation_device:
                   type: string
               required: []
               type: object
-            result: {}
+            result:
+              type: boolean
           required:
           - goal
           title: func_pack_get_msg_cmd参数
@@ -430,7 +436,8 @@ coincellassemblyworkstation_device:
               properties: {}
               required: []
               type: object
-            result: {}
+            result:
+              type: boolean
           required:
           - goal
           title: func_pack_send_finished_cmd参数
@@ -467,7 +474,8 @@ coincellassemblyworkstation_device:
               - assembly_type
               - assembly_pressure
               type: object
-            result: {}
+            result:
+              type: boolean
           required:
           - goal
           title: func_pack_send_msg_cmd参数
@@ -611,7 +619,8 @@ coincellassemblyworkstation_device:
               - elec_num
               - elec_use_num
               type: object
-            result: {}
+            result:
+              type: object
           required:
           - goal
           title: func_sendbottle_allpack_multi参数
@@ -663,31 +672,6 @@ coincellassemblyworkstation_device:
           title: modify_deck_name参数
           type: object
         type: UniLabJsonCommand
-      auto-post_init:
-        feedback: {}
-        goal: {}
-        goal_default:
-          ros_node: null
-        handles: {}
-        placeholder_keys: {}
-        result: {}
-        schema:
-          description: ''
-          properties:
-            feedback: {}
-            goal:
-              properties:
-                ros_node:
-                  type: object
-              required:
-              - ros_node
-              type: object
-            result: {}
-          required:
-          - goal
-          title: post_init参数
-          type: object
-        type: UniLabJsonCommand
       auto-qiming_coin_cell_code:
         feedback: {}
         goal: {}
@@ -735,7 +719,8 @@ coincellassemblyworkstation_device:
               required:
               - fujipian_panshu
               type: object
-            result: {}
+            result:
+              type: boolean
           required:
           - goal
           title: qiming_coin_cell_code参数
@@ -826,25 +811,24 @@ coincellassemblyworkstation_device:
         sys_status:
           type: string
       required:
-      - sys_status
-      - sys_mode
-      - request_rec_msg_status
-      - request_send_msg_status
       - data_assembly_coin_cell_num
+      - data_assembly_pressure
       - data_assembly_time
-      - data_open_circuit_voltage
       - data_axis_x_pos
       - data_axis_y_pos
       - data_axis_z_pos
-      - data_pole_weight
-      - data_assembly_pressure
-      - data_electrolyte_volume
-      - data_coin_num
       - data_coin_cell_code
+      - data_coin_num
       - data_electrolyte_code
-      - data_glove_box_pressure
+      - data_electrolyte_volume
       - data_glove_box_o2_content
+      - data_glove_box_pressure
       - data_glove_box_water_content
+      - data_open_circuit_voltage
+      - data_pole_weight
+      - request_rec_msg_status
+      - request_send_msg_status
+      - sys_mode
+      - sys_status
       type: object
-  registry_type: device
   version: 1.0.0

unilabos/registry/devices/gas_handler.yaml

@@ -50,26 +50,25 @@ gas_source.mock:
         goal: {}
         goal_default: {}
         handles: {}
-        result: {}
+        placeholder_keys: {}
+        result:
+          return_info: return_info
         schema:
           description: ''
           properties:
             feedback:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: EmptyIn_Feedback
               type: object
             goal:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: EmptyIn_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
-              required:
-              - return_info
               title: EmptyIn_Result
               type: object
           required:
@@ -82,26 +81,25 @@ gas_source.mock:
         goal: {}
         goal_default: {}
         handles: {}
-        result: {}
+        placeholder_keys: {}
+        result:
+          return_info: return_info
         schema:
           description: ''
           properties:
             feedback:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: EmptyIn_Feedback
               type: object
             goal:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: EmptyIn_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
-              required:
-              - return_info
               title: EmptyIn_Result
               type: object
           required:
@@ -116,32 +114,31 @@ gas_source.mock:
         goal_default:
           string: ''
         handles: {}
-        result: {}
+        placeholder_keys: {}
+        result:
+          return_info: return_info
+          success: success
         schema:
           description: ''
           properties:
             feedback:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: StrSingleInput_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 string:
                   type: string
-              required:
-              - string
               title: StrSingleInput_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
                 success:
                   type: boolean
-              required:
-              - return_info
-              - success
               title: StrSingleInput_Result
               type: object
           required:
@@ -232,26 +229,25 @@ vacuum_pump.mock:
         goal: {}
         goal_default: {}
         handles: {}
-        result: {}
+        placeholder_keys: {}
+        result:
+          return_info: return_info
         schema:
           description: ''
           properties:
             feedback:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: EmptyIn_Feedback
               type: object
             goal:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: EmptyIn_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
-              required:
-              - return_info
               title: EmptyIn_Result
               type: object
           required:
@@ -264,26 +260,25 @@ vacuum_pump.mock:
         goal: {}
         goal_default: {}
         handles: {}
-        result: {}
+        placeholder_keys: {}
+        result:
+          return_info: return_info
         schema:
           description: ''
           properties:
             feedback:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: EmptyIn_Feedback
               type: object
             goal:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: EmptyIn_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
-              required:
-              - return_info
               title: EmptyIn_Result
               type: object
           required:
@@ -298,32 +293,31 @@ vacuum_pump.mock:
         goal_default:
           string: ''
         handles: {}
-        result: {}
+        placeholder_keys: {}
+        result:
+          return_info: return_info
+          success: success
         schema:
           description: ''
           properties:
             feedback:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: StrSingleInput_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 string:
                   type: string
-              required:
-              - string
               title: StrSingleInput_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
                 success:
                   type: boolean
-              required:
-              - return_info
-              - success
               title: StrSingleInput_Result
               type: object
           required:

unilabos/registry/devices/hotel.yaml

@@ -5,7 +5,7 @@ hotel.thermo_orbitor_rs2_hotel:
     action_value_mappings: {}
     module: unilabos.devices.resource_container.container:HotelContainer
     status_types:
-      rotation: String
+      rotation: ''
     type: python
   config_info: []
   description: Thermo Orbitor RS2 Hotel容器设备，用于实验室样品的存储和管理。该设备通过HotelContainer类实现容器的旋转控制和状态监控，主要用于存储实验样品、试剂瓶或其他实验器具，支持旋转功能以便于样品的自动化存取。适用于需要有序存储和快速访问大量样品的实验室自动化场景。

unilabos/registry/devices/laiyu_liquid_test.yaml

@@ -22,7 +22,8 @@ xyz_stepper_controller:
               required:
               - degrees
               type: object
-            result: {}
+            result:
+              type: integer
           required:
           - goal
           title: degrees_to_steps参数
@@ -47,7 +48,8 @@ xyz_stepper_controller:
               required:
               - axis
               type: object
-            result: {}
+            result:
+              type: boolean
           required:
           - goal
           title: emergency_stop参数
@@ -72,7 +74,10 @@ xyz_stepper_controller:
                   type: boolean
               required: []
               type: object
-            result: {}
+            result:
+              additionalProperties:
+                type: boolean
+              type: object
           required:
           - goal
           title: enable_all_axes参数
@@ -101,7 +106,8 @@ xyz_stepper_controller:
               required:
               - axis
               type: object
-            result: {}
+            result:
+              type: boolean
           required:
           - goal
           title: enable_motor参数
@@ -122,7 +128,10 @@ xyz_stepper_controller:
               properties: {}
               required: []
               type: object
-            result: {}
+            result:
+              additionalProperties:
+                type: boolean
+              type: object
           required:
           - goal
           title: home_all_axes参数
@@ -147,7 +156,8 @@ xyz_stepper_controller:
               required:
               - axis
               type: object
-            result: {}
+            result:
+              type: boolean
           required:
           - goal
           title: home_axis参数
@@ -188,7 +198,8 @@ xyz_stepper_controller:
               - axis
               - position
               type: object
-            result: {}
+            result:
+              type: boolean
           required:
           - goal
           title: move_to_position参数
@@ -229,7 +240,8 @@ xyz_stepper_controller:
               - axis
               - degrees
               type: object
-            result: {}
+            result:
+              type: boolean
           required:
           - goal
           title: move_to_position_degrees参数
@@ -270,7 +282,8 @@ xyz_stepper_controller:
               - axis
               - revolutions
               type: object
-            result: {}
+            result:
+              type: boolean
           required:
           - goal
           title: move_to_position_revolutions参数
@@ -301,14 +314,17 @@ xyz_stepper_controller:
                   default: 5000
                   type: integer
                 x:
-                  type: string
+                  type: integer
                 y:
-                  type: string
+                  type: integer
                 z:
-                  type: string
+                  type: integer
               required: []
               type: object
-            result: {}
+            result:
+              additionalProperties:
+                type: boolean
+              type: object
           required:
           - goal
           title: move_xyz参数
@@ -339,14 +355,17 @@ xyz_stepper_controller:
                   default: 5000
                   type: integer
                 x_deg:
-                  type: string
+                  type: number
                 y_deg:
-                  type: string
+                  type: number
                 z_deg:
-                  type: string
+                  type: number
               required: []
               type: object
-            result: {}
+            result:
+              additionalProperties:
+                type: boolean
+              type: object
           required:
           - goal
           title: move_xyz_degrees参数
@@ -377,14 +396,17 @@ xyz_stepper_controller:
                   default: 5000
                   type: integer
                 x_rev:
-                  type: string
+                  type: number
                 y_rev:
-                  type: string
+                  type: number
                 z_rev:
-                  type: string
+                  type: number
               required: []
               type: object
-            result: {}
+            result:
+              additionalProperties:
+                type: boolean
+              type: object
           required:
           - goal
           title: move_xyz_revolutions参数
@@ -409,7 +431,8 @@ xyz_stepper_controller:
               required:
               - revolutions
               type: object
-            result: {}
+            result:
+              type: integer
           required:
           - goal
           title: revolutions_to_steps参数
@@ -442,7 +465,8 @@ xyz_stepper_controller:
               - axis
               - speed
               type: object
-            result: {}
+            result:
+              type: boolean
           required:
           - goal
           title: set_speed_mode参数
@@ -467,7 +491,8 @@ xyz_stepper_controller:
               required:
               - steps
               type: object
-            result: {}
+            result:
+              type: number
           required:
           - goal
           title: steps_to_degrees参数
@@ -492,7 +517,8 @@ xyz_stepper_controller:
               required:
               - steps
               type: object
-            result: {}
+            result:
+              type: number
           required:
           - goal
           title: steps_to_revolutions参数
@@ -513,7 +539,10 @@ xyz_stepper_controller:
               properties: {}
               required: []
               type: object
-            result: {}
+            result:
+              additionalProperties:
+                type: boolean
+              type: object
           required:
           - goal
           title: stop_all_axes参数
@@ -542,7 +571,8 @@ xyz_stepper_controller:
               required:
               - axis
               type: object
-            result: {}
+            result:
+              type: boolean
           required:
           - goal
           title: wait_for_completion参数
@@ -550,8 +580,7 @@ xyz_stepper_controller:
         type: UniLabJsonCommand
     module: unilabos.devices.liquid_handling.laiyu.drivers.xyz_stepper_driver:XYZStepperController
     status_types:
-      all_positions: dict
+      all_positions: Dict[MotorAxis, MotorPosition]
-      motor_status: unilabos.devices.liquid_handling.laiyu.drivers.xyz_stepper_driver:MotorPosition
     type: python
   config_info: []
   description: 新XYZ控制器
@@ -574,12 +603,10 @@ xyz_stepper_controller:
     data:
       properties:
         all_positions:
-          type: object
+          additionalProperties:
-        motor_status:
+            type: object
           type: object
       required:
-      - motor_status
       - all_positions
       type: object
-  registry_type: device
   version: 1.0.0

unilabos/registry/devices/neware_battery_test_system.yaml

@@ -5,31 +5,6 @@ neware_battery_test_system:
   - battery_test
   class:
     action_value_mappings:
-      auto-post_init:
-        feedback: {}
-        goal: {}
-        goal_default:
-          ros_node: null
-        handles: {}
-        placeholder_keys: {}
-        result: {}
-        schema:
-          description: ''
-          properties:
-            feedback: {}
-            goal:
-              properties:
-                ros_node:
-                  type: string
-              required:
-              - ros_node
-              type: object
-            result: {}
-          required:
-          - goal
-          title: post_init参数
-          type: object
-        type: UniLabJsonCommand
       auto-print_status_summary:
         feedback: {}
         goal: {}
@@ -66,7 +41,8 @@ neware_battery_test_system:
               properties: {}
               required: []
               type: object
-            result: {}
+            result:
+              type: boolean
           required:
           - goal
           title: test_connection参数
@@ -77,9 +53,8 @@ neware_battery_test_system:
         goal: {}
         goal_default: {}
         handles: {}
-        result:
+        placeholder_keys: {}
-          return_info: return_info
+        result: {}
-          success: success
         schema:
           description: 调试方法：显示所有资源的实际名称
           properties:
@@ -89,19 +64,10 @@ neware_battery_test_system:
               required: []
               type: object
             result:
-              properties:
-                return_info:
-                  description: 资源调试信息
-                  type: string
-                success:
-                  description: 是否成功
-                  type: boolean
-              required:
-              - return_info
-              - success
               type: object
           required:
           - goal
+          title: debug_resource_names参数
           type: object
         type: UniLabJsonCommand
       export_status_json:
@@ -111,9 +77,8 @@ neware_battery_test_system:
         goal_default:
           filepath: bts_status.json
         handles: {}
-        result:
+        placeholder_keys: {}
-          return_info: return_info
+        result: {}
-          success: success
         schema:
           description: 导出当前状态数据到JSON文件
           properties:
@@ -127,19 +92,10 @@ neware_battery_test_system:
               required: []
               type: object
             result:
-              properties:
-                return_info:
-                  description: 导出操作结果信息
-                  type: string
-                success:
-                  description: 导出是否成功
-                  type: boolean
-              required:
-              - return_info
-              - success
               type: object
           required:
           - goal
+          title: export_status_json参数
           type: object
         type: UniLabJsonCommand
       get_device_summary:
@@ -181,10 +137,8 @@ neware_battery_test_system:
         goal_default:
           plate_num: null
         handles: {}
-        result:
+        placeholder_keys: {}
-          plate_data: plate_data
+        result: {}
-          return_info: return_info
-          success: success
         schema:
           description: 获取指定盘或所有盘的状态信息
           properties:
@@ -193,29 +147,14 @@ neware_battery_test_system:
               properties:
                 plate_num:
                   description: 盘号 (1 或 2)，如果为null则返回所有盘的状态
-                  maximum: 2
-                  minimum: 1
                   type: integer
               required: []
               type: object
             result:
-              properties:
-                plate_data:
-                  description: 盘状态数据（单盘或所有盘）
-                  type: object
-                return_info:
-                  description: 操作结果信息
-                  type: string
-                success:
-                  description: 查询是否成功
-                  type: boolean
-              required:
-              - return_info
-              - success
-              - plate_data
               type: object
           required:
           - goal
+          title: get_plate_status参数
           type: object
         type: UniLabJsonCommand
       print_status_summary_action:
@@ -223,9 +162,8 @@ neware_battery_test_system:
         goal: {}
         goal_default: {}
         handles: {}
-        result:
+        placeholder_keys: {}
-          return_info: return_info
+        result: {}
-          success: success
         schema:
           description: 打印通道状态摘要信息到控制台
           properties:
@@ -235,28 +173,21 @@ neware_battery_test_system:
               required: []
               type: object
             result:
-              properties:
-                return_info:
-                  description: 打印操作结果信息
-                  type: string
-                success:
-                  description: 打印是否成功
-                  type: boolean
-              required:
-              - return_info
-              - success
               type: object
           required:
           - goal
+          title: print_status_summary_action参数
           type: object
         type: UniLabJsonCommand
       query_plate_action:
         feedback: {}
         goal:
-          string: plate_id
+          plate_id: plate_id
+          string: string
         goal_default:
           string: ''
         handles: {}
+        placeholder_keys: {}
         result:
           return_info: return_info
           success: success
@@ -264,27 +195,23 @@ neware_battery_test_system:
           description: ''
           properties:
             feedback:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: StrSingleInput_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 string:
                   type: string
-              required:
-              - string
               title: StrSingleInput_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
                 success:
                   type: boolean
-              required:
-              - return_info
-              - success
               title: StrSingleInput_Result
               type: object
           required:
@@ -298,13 +225,11 @@ neware_battery_test_system:
           csv_path: string
           output_dir: string
         goal_default:
-          csv_path: ''
+          csv_path: null
           output_dir: .
         handles: {}
-        result:
+        placeholder_keys: {}
-          return_info: return_info
+        result: {}
-          submitted_count: submitted_count
-          success: success
         schema:
           description: 从CSV文件批量提交Neware测试任务
           properties:
@@ -315,31 +240,17 @@ neware_battery_test_system:
                   description: 输入CSV文件的绝对路径
                   type: string
                 output_dir:
+                  default: .
                   description: 输出目录（用于存储XML和备份文件），默认当前目录
                   type: string
               required:
               - csv_path
               type: object
             result:
-              properties:
-                return_info:
-                  description: 执行结果详细信息
-                  type: string
-                submitted_count:
-                  description: 成功提交的任务数量
-                  type: integer
-                success:
-                  description: 是否成功
-                  type: boolean
-                total_count:
-                  description: CSV文件中的总行数
-                  type: integer
-              required:
-              - return_info
-              - success
               type: object
           required:
           - goal
+          title: submit_from_csv参数
           type: object
         type: UniLabJsonCommand
       test_connection_action:
@@ -347,9 +258,8 @@ neware_battery_test_system:
         goal: {}
         goal_default: {}
         handles: {}
-        result:
+        placeholder_keys: {}
-          return_info: return_info
+        result: {}
-          success: success
         schema:
           description: 测试与电池测试系统的TCP连接
           properties:
@@ -359,19 +269,10 @@ neware_battery_test_system:
               required: []
               type: object
             result:
-              properties:
-                return_info:
-                  description: 连接测试结果信息
-                  type: string
-                success:
-                  description: 连接测试是否成功
-                  type: boolean
-              required:
-              - return_info
-              - success
               type: object
           required:
           - goal
+          title: test_connection_action参数
           type: object
         type: UniLabJsonCommand
       upload_backup_to_oss:
@@ -392,12 +293,8 @@ neware_battery_test_system:
             handler_key: uploaded_files
             io_type: sink
             label: Uploaded Files (with standard flow info)
-        result:
+        placeholder_keys: {}
-          failed_files: failed_files
+        result: {}
-          return_info: return_info
-          success: success
-          total_count: total_count
-          uploaded_count: uploaded_count
         schema:
           description: 上传备份文件到阿里云OSS
           properties:
@@ -417,65 +314,17 @@ neware_battery_test_system:
               required: []
               type: object
             result:
-              properties:
-                failed_files:
-                  description: 上传失败的文件名列表
-                  items:
-                    type: string
-                  type: array
-                return_info:
-                  description: 上传操作结果信息
-                  type: string
-                success:
-                  description: 上传是否成功
-                  type: boolean
-                total_count:
-                  description: 总文件数
-                  type: integer
-                uploaded_count:
-                  description: 成功上传的文件数
-                  type: integer
-                uploaded_files:
-                  description: 成功上传的文件详情列表
-                  items:
-                    properties:
-                      Battery_Code:
-                        description: 电池编码
-                        type: string
-                      Electrolyte_Code:
-                        description: 电解液编码
-                        type: string
-                      filename:
-                        description: 文件名
-                        type: string
-                      url:
-                        description: OSS下载链接
-                        type: string
-                    required:
-                    - filename
-                    - url
-                    - Battery_Code
-                    - Electrolyte_Code
-                    type: object
-                  type: array
-              required:
-              - return_info
-              - success
-              - uploaded_count
-              - total_count
-              - failed_files
-              - uploaded_files
               type: object
           required:
           - goal
+          title: upload_backup_to_oss参数
           type: object
         type: UniLabJsonCommand
     module: unilabos.devices.neware_battery_test_system.neware_battery_test_system:NewareBatteryTestSystem
     status_types:
-      channel_status: dict
+      channel_status: Dict[int, Dict]
-      connection_info: dict
+      connection_info: Dict[str, str]
       device_summary: dict
-      plate_status: dict
       status: str
       total_channels: int
     type: python
@@ -517,23 +366,24 @@ neware_battery_test_system:
     data:
       properties:
         channel_status:
+          additionalProperties:
+            type: object
           type: object
         connection_info:
+          additionalProperties:
+            type: string
           type: object
         device_summary:
           type: object
-        plate_status:
-          type: object
         status:
           type: string
         total_channels:
           type: integer
       required:
-      - status
       - channel_status
       - connection_info
-      - total_channels
-      - plate_status
       - device_summary
+      - status
+      - total_channels
       type: object
   version: 1.0.0

unilabos/registry/devices/opcua_example.yaml

@@ -142,8 +142,7 @@ opcua_example:
           type: object
         type: UniLabJsonCommand
     module: unilabos.device_comms.opcua_client.client:OpcUaClient
-    status_types:
+    status_types: {}
-      node_value: String
     type: python
   config_info: []
   description: null
@@ -167,10 +166,7 @@ opcua_example:
       - url
       type: object
     data:
-      properties:
+      properties: {}
-        node_value:
+      required: []
-          type: string
-      required:
-      - node_value
       type: object
   version: 1.0.0

unilabos/registry/devices/opsky_ATR30007.yaml

@@ -80,7 +80,8 @@ opsky_ATR30007:
                   type: string
               required: []
               type: object
-            result: {}
+            result:
+              type: object
           required:
           - goal
           title: run_once参数

unilabos/registry/devices/organic_miscellaneous.yaml

@@ -100,42 +100,41 @@ rotavap.one:
           type: object
         type: UniLabJsonCommand
       set_timer:
-        feedback: {}
+        feedback:
+          status: status
         goal:
           command: command
         goal_default:
           command: ''
         handles: {}
+        placeholder_keys: {}
         result:
+          return_info: return_info
           success: success
         schema:
           description: ''
           properties:
             feedback:
+              additionalProperties: false
               properties:
                 status:
                   type: string
-              required:
-              - status
               title: SendCmd_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 command:
                   type: string
-              required:
-              - command
               title: SendCmd_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
                 success:
                   type: boolean
-              required:
-              - return_info
-              - success
               title: SendCmd_Result
               type: object
           required:
@@ -250,9 +249,13 @@ separator.homemade:
         feedback:
           status: status
         goal:
+          event: event
           settling_time: settling_time
           stir_speed: stir_speed
-          stir_time: stir_time,
+          stir_time: stir_time
+          time: time
+          time_spec: time_spec
+          vessel: vessel
         goal_default:
           event: ''
           settling_time: ''
@@ -281,34 +284,42 @@ separator.homemade:
             sample_id: ''
             type: ''
         handles: {}
+        placeholder_keys: {}
         result:
+          message: message
+          return_info: return_info
           success: success
         schema:
           description: ''
           properties:
             feedback:
+              additionalProperties: false
               properties:
                 status:
                   type: string
-              required:
-              - status
               title: Stir_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 event:
                   type: string
                 settling_time:
                   type: string
                 stir_speed:
+                  maximum: 1.7976931348623157e+308
+                  minimum: -1.7976931348623157e+308
                   type: number
                 stir_time:
+                  maximum: 1.7976931348623157e+308
+                  minimum: -1.7976931348623157e+308
                   type: number
                 time:
                   type: string
                 time_spec:
                   type: string
                 vessel:
+                  additionalProperties: false
                   properties:
                     category:
                       type: string
@@ -327,16 +338,26 @@ separator.homemade:
                     parent:
                       type: string
                     pose:
+                      additionalProperties: false
                       properties:
                         orientation:
+                          additionalProperties: false
                           properties:
                             w:
+                              maximum: 1.7976931348623157e+308
+                              minimum: -1.7976931348623157e+308
                               type: number
                             x:
+                              maximum: 1.7976931348623157e+308
+                              minimum: -1.7976931348623157e+308
                               type: number
                             y:
+                              maximum: 1.7976931348623157e+308
+                              minimum: -1.7976931348623157e+308
                               type: number
                             z:
+                              maximum: 1.7976931348623157e+308
+                              minimum: -1.7976931348623157e+308
                               type: number
                           required:
                           - x
@@ -346,12 +367,19 @@ separator.homemade:
                           title: orientation
                           type: object
                         position:
+                          additionalProperties: false
                           properties:
                             x:
+                              maximum: 1.7976931348623157e+308
+                              minimum: -1.7976931348623157e+308
                               type: number
                             y:
+                              maximum: 1.7976931348623157e+308
+                              minimum: -1.7976931348623157e+308
                               type: number
                             z:
+                              maximum: 1.7976931348623157e+308
+                              minimum: -1.7976931348623157e+308
                               type: number
                           required:
                           - x
@@ -381,17 +409,10 @@ separator.homemade:
                   - data
                   title: vessel
                   type: object
-              required:
-              - vessel
-              - time
-              - event
-              - time_spec
-              - stir_time
-              - stir_speed
-              - settling_time
               title: Stir_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 message:
                   type: string
@@ -399,10 +420,6 @@ separator.homemade:
                   type: string
                 success:
                   type: boolean
-              required:
-              - success
-              - message
-              - return_info
               title: Stir_Result
               type: object
           required:
@@ -418,36 +435,34 @@ separator.homemade:
         goal_default:
           command: ''
         handles: {}
+        placeholder_keys: {}
         result:
+          return_info: return_info
           success: success
         schema:
           description: ''
           properties:
             feedback:
+              additionalProperties: false
               properties:
                 status:
                   type: string
-              required:
-              - status
               title: SendCmd_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 command:
                   type: string
-              required:
-              - command
               title: SendCmd_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
                 success:
                   type: boolean
-              required:
-              - return_info
-              - success
               title: SendCmd_Result
               type: object
           required:

unilabos/registry/devices/post_process_station.yaml

@@ -28,31 +28,6 @@ post_process_station:
           title: load_config参数
           type: object
         type: UniLabJsonCommand
-      auto-post_init:
-        feedback: {}
-        goal: {}
-        goal_default:
-          ros_node: null
-        handles: {}
-        placeholder_keys: {}
-        result: {}
-        schema:
-          description: ''
-          properties:
-            feedback: {}
-            goal:
-              properties:
-                ros_node:
-                  type: string
-              required:
-              - ros_node
-              type: object
-            result: {}
-          required:
-          - goal
-          title: post_init参数
-          type: object
-        type: UniLabJsonCommand
       auto-print_cache_stats:
         feedback: {}
         goal: {}
@@ -104,42 +79,41 @@ post_process_station:
           type: object
         type: UniLabJsonCommand
       disconnect:
-        feedback: {}
+        feedback:
+          status: status
         goal:
-          command: {}
+          command: command
         goal_default:
           command: ''
         handles: {}
+        placeholder_keys: {}
         result:
+          return_info: return_info
           success: success
         schema:
           description: ''
           properties:
             feedback:
+              additionalProperties: false
               properties:
                 status:
                   type: string
-              required:
-              - status
               title: SendCmd_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 command:
                   type: string
-              required:
-              - command
               title: SendCmd_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
                 success:
                   type: boolean
-              required:
-              - return_info
-              - success
               title: SendCmd_Result
               type: object
           required:
@@ -149,42 +123,41 @@ post_process_station:
         type: SendCmd
       read_node:
         feedback:
-          result: result
+          status: status
         goal:
-          command: node_name
+          command: command
+          node_name: node_name
         goal_default:
           command: ''
         handles: {}
+        placeholder_keys: {}
         result:
+          return_info: return_info
           success: success
         schema:
           description: ''
           properties:
             feedback:
+              additionalProperties: false
               properties:
                 status:
                   type: string
-              required:
-              - status
               title: SendCmd_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 command:
                   type: string
-              required:
-              - command
               title: SendCmd_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
                 success:
                   type: boolean
-              required:
-              - return_info
-              - success
               title: SendCmd_Result
               type: object
           required:
@@ -283,17 +256,19 @@ post_process_station:
           description: ''
           properties:
             feedback:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: PostProcessTriggerClean_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 acetone_inner_wall_cleaning_count:
                   maximum: 2147483647
                   minimum: -2147483648
                   type: integer
                 acetone_inner_wall_cleaning_injection:
+                  maximum: 1.7976931348623157e+308
+                  minimum: -1.7976931348623157e+308
                   type: number
                 acetone_inner_wall_cleaning_waste_time:
                   maximum: 2147483647
@@ -304,6 +279,8 @@ post_process_station:
                   minimum: -2147483648
                   type: integer
                 acetone_outer_wall_cleaning_injection:
+                  maximum: 1.7976931348623157e+308
+                  minimum: -1.7976931348623157e+308
                   type: number
                 acetone_outer_wall_cleaning_wait_time:
                   maximum: 2147483647
@@ -322,6 +299,8 @@ post_process_station:
                   minimum: -2147483648
                   type: integer
                 acetone_stirrer_cleaning_injection:
+                  maximum: 1.7976931348623157e+308
+                  minimum: -1.7976931348623157e+308
                   type: number
                 acetone_stirrer_cleaning_wait_time:
                   maximum: 2147483647
@@ -348,6 +327,8 @@ post_process_station:
                   minimum: -2147483648
                   type: integer
                 nmp_inner_wall_cleaning_injection:
+                  maximum: 1.7976931348623157e+308
+                  minimum: -1.7976931348623157e+308
                   type: number
                 nmp_inner_wall_cleaning_waste_time:
                   maximum: 2147483647
@@ -358,6 +339,8 @@ post_process_station:
                   minimum: -2147483648
                   type: integer
                 nmp_outer_wall_cleaning_injection:
+                  maximum: 1.7976931348623157e+308
+                  minimum: -1.7976931348623157e+308
                   type: number
                 nmp_outer_wall_cleaning_wait_time:
                   maximum: 2147483647
@@ -376,6 +359,8 @@ post_process_station:
                   minimum: -2147483648
                   type: integer
                 nmp_stirrer_cleaning_injection:
+                  maximum: 1.7976931348623157e+308
+                  minimum: -1.7976931348623157e+308
                   type: number
                 nmp_stirrer_cleaning_wait_time:
                   maximum: 2147483647
@@ -394,6 +379,8 @@ post_process_station:
                   minimum: -2147483648
                   type: integer
                 water_inner_wall_cleaning_injection:
+                  maximum: 1.7976931348623157e+308
+                  minimum: -1.7976931348623157e+308
                   type: number
                 water_inner_wall_cleaning_waste_time:
                   maximum: 2147483647
@@ -404,6 +391,8 @@ post_process_station:
                   minimum: -2147483648
                   type: integer
                 water_outer_wall_cleaning_injection:
+                  maximum: 1.7976931348623157e+308
+                  minimum: -1.7976931348623157e+308
                   type: number
                 water_outer_wall_cleaning_wait_time:
                   maximum: 2147483647
@@ -422,6 +411,8 @@ post_process_station:
                   minimum: -2147483648
                   type: integer
                 water_stirrer_cleaning_injection:
+                  maximum: 1.7976931348623157e+308
+                  minimum: -1.7976931348623157e+308
                   type: number
                 water_stirrer_cleaning_wait_time:
                   maximum: 2147483647
@@ -431,55 +422,13 @@ post_process_station:
                   maximum: 2147483647
                   minimum: -2147483648
                   type: integer
-              required:
-              - nmp_outer_wall_cleaning_injection
-              - nmp_outer_wall_cleaning_count
-              - nmp_outer_wall_cleaning_wait_time
-              - nmp_outer_wall_cleaning_waste_time
-              - nmp_inner_wall_cleaning_injection
-              - nmp_inner_wall_cleaning_count
-              - nmp_pump_cleaning_suction_count
-              - nmp_inner_wall_cleaning_waste_time
-              - nmp_stirrer_cleaning_injection
-              - nmp_stirrer_cleaning_count
-              - nmp_stirrer_cleaning_wait_time
-              - nmp_stirrer_cleaning_waste_time
-              - water_outer_wall_cleaning_injection
-              - water_outer_wall_cleaning_count
-              - water_outer_wall_cleaning_wait_time
-              - water_outer_wall_cleaning_waste_time
-              - water_inner_wall_cleaning_injection
-              - water_inner_wall_cleaning_count
-              - water_pump_cleaning_suction_count
-              - water_inner_wall_cleaning_waste_time
-              - water_stirrer_cleaning_injection
-              - water_stirrer_cleaning_count
-              - water_stirrer_cleaning_wait_time
-              - water_stirrer_cleaning_waste_time
-              - acetone_outer_wall_cleaning_injection
-              - acetone_outer_wall_cleaning_count
-              - acetone_outer_wall_cleaning_wait_time
-              - acetone_outer_wall_cleaning_waste_time
-              - acetone_inner_wall_cleaning_injection
-              - acetone_inner_wall_cleaning_count
-              - acetone_pump_cleaning_suction_count
-              - acetone_inner_wall_cleaning_waste_time
-              - acetone_stirrer_cleaning_injection
-              - acetone_stirrer_cleaning_count
-              - acetone_stirrer_cleaning_wait_time
-              - acetone_stirrer_cleaning_waste_time
-              - pipe_blowing_time
-              - injection_pump_forward_empty_suction_count
-              - injection_pump_reverse_empty_suction_count
-              - filtration_liquid_selection
               title: PostProcessTriggerClean_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
-              required:
-              - return_info
               title: PostProcessTriggerClean_Result
               type: object
           required:
@@ -502,11 +451,11 @@ post_process_station:
           description: ''
           properties:
             feedback:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: PostProcessGrab_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 raw_tank_number:
                   maximum: 2147483647
@@ -516,17 +465,13 @@ post_process_station:
                   maximum: 2147483647
                   minimum: -2147483648
                   type: integer
-              required:
-              - reaction_tank_number
-              - raw_tank_number
               title: PostProcessGrab_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
-              required:
-              - return_info
               title: PostProcessGrab_Result
               type: object
           required:
@@ -573,13 +518,15 @@ post_process_station:
           description: ''
           properties:
             feedback:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: PostProcessTriggerPostPro_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 atomization_fast_speed:
+                  maximum: 1.7976931348623157e+308
+                  minimum: -1.7976931348623157e+308
                   type: number
                 atomization_pressure_kpa:
                   maximum: 2147483647
@@ -594,8 +541,12 @@ post_process_station:
                   minimum: -2147483648
                   type: integer
                 first_wash_water_amount:
+                  maximum: 1.7976931348623157e+308
+                  minimum: -1.7976931348623157e+308
                   type: number
                 initial_water_amount:
+                  maximum: 1.7976931348623157e+308
+                  minimum: -1.7976931348623157e+308
                   type: number
                 injection_pump_push_speed:
                   maximum: 2147483647
@@ -622,32 +573,20 @@ post_process_station:
                   minimum: -2147483648
                   type: integer
                 second_wash_water_amount:
+                  maximum: 1.7976931348623157e+308
+                  minimum: -1.7976931348623157e+308
                   type: number
                 wash_slow_speed:
+                  maximum: 1.7976931348623157e+308
+                  minimum: -1.7976931348623157e+308
                   type: number
-              required:
-              - atomization_fast_speed
-              - wash_slow_speed
-              - injection_pump_suction_speed
-              - injection_pump_push_speed
-              - raw_liquid_suction_count
-              - first_wash_water_amount
-              - second_wash_water_amount
-              - first_powder_mixing_tim
-              - second_powder_mixing_time
-              - first_powder_wash_count
-              - second_powder_wash_count
-              - initial_water_amount
-              - pre_filtration_mixing_time
-              - atomization_pressure_kpa
               title: PostProcessTriggerPostPro_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
-              required:
-              - return_info
               title: PostProcessTriggerPostPro_Result
               type: object
           required:
@@ -669,30 +608,26 @@ post_process_station:
           description: ''
           properties:
             feedback:
+              additionalProperties: false
               properties:
                 status:
                   type: string
-              required:
-              - status
               title: SendCmd_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 command:
                   type: string
-              required:
-              - command
               title: SendCmd_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
                 success:
                   type: boolean
-              required:
-              - return_info
-              - success
               title: SendCmd_Result
               type: object
           required:
@@ -702,8 +637,7 @@ post_process_station:
         type: SendCmd
     module: unilabos.devices.workstation.post_process.post_process:OpcUaClient
     status_types:
-      cache_stats: dict
+      cache_stats: Dict[str, Any]
-      node_value: String
     type: python
   config_info: []
   description: 后处理站
@@ -718,7 +652,9 @@ post_process_station:
         config_path:
           type: string
         deck:
-          type: string
+          anyOf:
+          - type: object
+          - type: object
         password:
           type: string
         subscription_interval:
@@ -738,10 +674,7 @@ post_process_station:
       properties:
         cache_stats:
           type: object
-        node_value:
-          type: string
       required:
-      - node_value
       - cache_stats
       type: object
   version: 1.0.0

unilabos/registry/devices/pump_and_valve.yaml

@@ -136,36 +136,36 @@ solenoid_valve:
       set_valve_position:
         feedback: {}
         goal:
-          string: position
+          position: position
+          string: string
         goal_default:
           string: ''
         handles: {}
-        result: {}
+        placeholder_keys: {}
+        result:
+          return_info: return_info
+          success: success
         schema:
           description: ''
           properties:
             feedback:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: StrSingleInput_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 string:
                   type: string
-              required:
-              - string
               title: StrSingleInput_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
                 success:
                   type: boolean
-              required:
-              - return_info
-              - success
               title: StrSingleInput_Result
               type: object
           required:
@@ -278,26 +278,25 @@ solenoid_valve.mock:
         goal: {}
         goal_default: {}
         handles: {}
-        result: {}
+        placeholder_keys: {}
+        result:
+          return_info: return_info
         schema:
           description: ''
           properties:
             feedback:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: EmptyIn_Feedback
               type: object
             goal:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: EmptyIn_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
-              required:
-              - return_info
               title: EmptyIn_Result
               type: object
           required:
@@ -310,26 +309,25 @@ solenoid_valve.mock:
         goal: {}
         goal_default: {}
         handles: {}
-        result: {}
+        placeholder_keys: {}
+        result:
+          return_info: return_info
         schema:
           description: ''
           properties:
             feedback:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: EmptyIn_Feedback
               type: object
             goal:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: EmptyIn_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
-              required:
-              - return_info
               title: EmptyIn_Result
               type: object
           required:
@@ -422,6 +420,27 @@ syringe_pump_with_valve.runze.SY03B-T06:
           title: initialize参数
           type: object
         type: UniLabJsonCommand
+      auto-list:
+        feedback: {}
+        goal: {}
+        goal_default: {}
+        handles: {}
+        placeholder_keys: {}
+        result: {}
+        schema:
+          description: list的参数schema
+          properties:
+            feedback: {}
+            goal:
+              properties: {}
+              required: []
+              type: object
+            result: {}
+          required:
+          - goal
+          title: list参数
+          type: object
+        type: UniLabJsonCommand
       auto-pull_plunger:
         feedback: {}
         goal: {}
@@ -695,7 +714,10 @@ syringe_pump_with_valve.runze.SY03B-T06:
             goal:
               properties:
                 position:
-                  type: string
+                  anyOf:
+                  - type: integer
+                  - type: string
+                  - type: number
               required:
               - position
               type: object
@@ -720,7 +742,9 @@ syringe_pump_with_valve.runze.SY03B-T06:
             goal:
               properties:
                 velocity:
-                  type: string
+                  anyOf:
+                  - type: integer
+                  - type: string
               required:
               - velocity
               type: object
@@ -780,13 +804,13 @@ syringe_pump_with_valve.runze.SY03B-T06:
     status_types:
       max_velocity: float
       mode: int
-      plunger_position: String
+      plunger_position: ''
       position: float
       status: str
       valve_position: str
-      velocity_end: String
+      velocity_end: ''
-      velocity_grade: String
+      velocity_grade: ''
-      velocity_init: String
+      velocity_init: ''
     type: python
   config_info: []
   description: 润泽精密注射泵设备，集成阀门控制的高精度流体输送系统。该设备通过串口通信控制，支持多种运行模式和精确的体积控制。具备可变速度控制、精密定位、阀门切换、实时状态监控等功能。适用于微量液体输送、精密进样、流速控制、化学反应进料等需要高精度流体操作的实验室自动化应用。
@@ -885,15 +909,15 @@ syringe_pump_with_valve.runze.SY03B-T06:
         velocity_init:
           type: string
       required:
-      - status
-      - mode
       - max_velocity
+      - mode
+      - plunger_position
+      - position
+      - status
+      - valve_position
+      - velocity_end
       - velocity_grade
       - velocity_init
-      - velocity_end
-      - valve_position
-      - position
-      - plunger_position
       type: object
   version: 1.0.0
 syringe_pump_with_valve.runze.SY03B-T08:
@@ -943,6 +967,27 @@ syringe_pump_with_valve.runze.SY03B-T08:
           title: initialize参数
           type: object
         type: UniLabJsonCommand
+      auto-list:
+        feedback: {}
+        goal: {}
+        goal_default: {}
+        handles: {}
+        placeholder_keys: {}
+        result: {}
+        schema:
+          description: list的参数schema
+          properties:
+            feedback: {}
+            goal:
+              properties: {}
+              required: []
+              type: object
+            result: {}
+          required:
+          - goal
+          title: list参数
+          type: object
+        type: UniLabJsonCommand
       auto-pull_plunger:
         feedback: {}
         goal: {}
@@ -1216,7 +1261,10 @@ syringe_pump_with_valve.runze.SY03B-T08:
             goal:
               properties:
                 position:
-                  type: string
+                  anyOf:
+                  - type: integer
+                  - type: string
+                  - type: number
               required:
               - position
               type: object
@@ -1241,7 +1289,9 @@ syringe_pump_with_valve.runze.SY03B-T08:
             goal:
               properties:
                 velocity:
-                  type: string
+                  anyOf:
+                  - type: integer
+                  - type: string
               required:
               - velocity
               type: object
@@ -1301,13 +1351,13 @@ syringe_pump_with_valve.runze.SY03B-T08:
     status_types:
       max_velocity: float
       mode: int
-      plunger_position: String
+      plunger_position: ''
       position: float
       status: str
       valve_position: str
-      velocity_end: String
+      velocity_end: ''
-      velocity_grade: String
+      velocity_grade: ''
-      velocity_init: String
+      velocity_init: ''
     type: python
   config_info: []
   description: 润泽精密注射泵设备，集成阀门控制的高精度流体输送系统。该设备通过串口通信控制，支持多种运行模式和精确的体积控制。具备可变速度控制、精密定位、阀门切换、实时状态监控等功能。适用于微量液体输送、精密进样、流速控制、化学反应进料等需要高精度流体操作的实验室自动化应用。
@@ -1422,14 +1472,14 @@ syringe_pump_with_valve.runze.SY03B-T08:
         velocity_init:
           type: string
       required:
-      - status
-      - mode
       - max_velocity
+      - mode
+      - plunger_position
+      - position
+      - status
+      - valve_position
+      - velocity_end
       - velocity_grade
       - velocity_init
-      - velocity_end
-      - valve_position
-      - position
-      - plunger_position
       type: object
   version: 1.0.0

unilabos/registry/devices/reaction_station_bioyond.yaml

@@ -13,12 +13,13 @@ reaction_station.bioyond:
           start_point: start_point
           start_step_key: start_step_key
         goal_default:
-          duration: 0
+          duration: null
           end_point: 0
           end_step_key: ''
           start_point: 0
           start_step_key: ''
         handles: {}
+        placeholder_keys: {}
         result: {}
         schema:
           description: 添加时间约束 - 在两个工作流之间添加时间约束
@@ -30,23 +31,19 @@ reaction_station.bioyond:
                   description: 时间(秒)
                   type: integer
                 end_point:
-                  default: Start
+                  default: 0
                   description: 终点计时点 (Start=开始前, End=结束后)
-                  enum:
+                  type: integer
-                  - Start
-                  - End
-                  type: string
                 end_step_key:
+                  default: ''
                   description: 终点步骤Key (可选, 默认为空则自动选择)
                   type: string
                 start_point:
-                  default: Start
+                  default: 0
                   description: 起点计时点 (Start=开始前, End=结束后)
-                  enum:
+                  type: integer
-                  - Start
-                  - End
-                  type: string
                 start_step_key:
+                  default: ''
                   description: 起点步骤Key (例如 "feeding", "liquid", 可选, 默认为空则自动选择)
                   type: string
               required:
@@ -98,7 +95,8 @@ reaction_station.bioyond:
               required:
               - json_str
               type: object
-            result: {}
+            result:
+              type: object
           required:
           - goal
           title: create_order参数
@@ -125,7 +123,8 @@ reaction_station.bioyond:
               required:
               - workflow_ids
               type: object
-            result: {}
+            result:
+              type: object
           required:
           - goal
           title: hard_delete_merged_workflows参数
@@ -150,7 +149,8 @@ reaction_station.bioyond:
               required:
               - json_str
               type: object
-            result: {}
+            result:
+              type: object
           required:
           - goal
           title: merge_workflow_with_parameters参数
@@ -175,7 +175,8 @@ reaction_station.bioyond:
               required:
               - report_request
               type: object
-            result: {}
+            result:
+              type: object
           required:
           - goal
           title: process_temperature_cutoff_report参数
@@ -200,7 +201,12 @@ reaction_station.bioyond:
               required:
               - web_workflow_json
               type: object
-            result: {}
+            result:
+              items:
+                additionalProperties:
+                  type: string
+                type: object
+              type: array
           required:
           - goal
           title: process_web_workflows参数
@@ -229,7 +235,8 @@ reaction_station.bioyond:
               - reactor_id
               - temperature
               type: object
-            result: {}
+            result:
+              type: string
           required:
           - goal
           title: set_reactor_temperature参数
@@ -254,7 +261,8 @@ reaction_station.bioyond:
               required:
               - preintake_id
               type: object
-            result: {}
+            result:
+              type: object
           required:
           - goal
           title: skip_titration_steps参数
@@ -275,7 +283,8 @@ reaction_station.bioyond:
               properties: {}
               required: []
               type: object
-            result: {}
+            result:
+              type: object
           required:
           - goal
           title: sync_workflow_sequence_from_bioyond参数
@@ -307,7 +316,8 @@ reaction_station.bioyond:
                   type: integer
               required: []
               type: object
-            result: {}
+            result:
+              type: object
           required:
           - goal
           title: wait_for_multiple_orders_and_get_reports参数
@@ -359,7 +369,8 @@ reaction_station.bioyond:
               required:
               - workflow_id
               type: object
-            result: {}
+            result:
+              type: object
           required:
           - goal
           title: workflow_step_query参数
@@ -370,9 +381,8 @@ reaction_station.bioyond:
         goal: {}
         goal_default: {}
         handles: {}
-        result:
+        placeholder_keys: {}
-          code: code
+        result: {}
-          message: message
         schema:
           description: 清空服务端所有非核心工作流 (保留核心流程)
           properties:
@@ -382,13 +392,6 @@ reaction_station.bioyond:
               required: []
               type: object
             result:
-              properties:
-                code:
-                  description: 操作结果代码(1表示成功)
-                  type: integer
-                message:
-                  description: 结果描述
-                  type: string
               type: object
           required:
           - goal
@@ -405,13 +408,14 @@ reaction_station.bioyond:
           torque_variation: torque_variation
           volume: volume
         goal_default:
-          assign_material_name: ''
+          assign_material_name: null
-          temperature: ''
+          temperature: 25.0
-          time: ''
+          time: '90'
-          titration_type: ''
+          titration_type: '1'
-          torque_variation: ''
+          torque_variation: 2
-          volume: ''
+          volume: null
         handles: {}
+        placeholder_keys: {}
         result: {}
         schema:
           description: 滴回去
@@ -423,33 +427,27 @@ reaction_station.bioyond:
                   description: 物料名称（不能为空）
                   type: string
                 temperature:
+                  default: 25.0
                   description: 温度设定(°C)
-                  type: string
+                  type: number
                 time:
+                  default: '90'
                   description: 观察时间(分钟)
                   type: string
                 titration_type:
+                  default: '1'
                   description: 是否滴定(NO=否, YES=是)
-                  enum:
-                  - 'NO'
-                  - 'YES'
                   type: string
                 torque_variation:
+                  default: 2
                   description: 是否观察 (NO=否, YES=是)
-                  enum:
+                  type: integer
-                  - 'NO'
-                  - 'YES'
-                  type: string
                 volume:
                   description: 分液公式(mL)
                   type: string
               required:
-              - volume
               - assign_material_name
-              - time
+              - volume
-              - torque_variation
-              - titration_type
-              - temperature
               type: object
             result: {}
           required:
@@ -462,7 +460,7 @@ reaction_station.bioyond:
         goal:
           batch_reports_result: batch_reports_result
         goal_default:
-          batch_reports_result: ''
+          batch_reports_result: null
         handles:
           input:
           - data_key: batch_reports_result
@@ -478,8 +476,8 @@ reaction_station.bioyond:
             handler_key: ACTUALS_EXTRACTED
             io_type: sink
             label: Extracted Actuals
-        result:
+        placeholder_keys: {}
-          return_info: return_info
+        result: {}
         schema:
           description: 从批量任务完成报告中提取每个订单的实际加料量，输出extracted列表。
           properties:
@@ -493,13 +491,6 @@ reaction_station.bioyond:
               - batch_reports_result
               type: object
             result:
-              properties:
-                return_info:
-                  description: JSON字符串，包含actuals数组，每项含order_code, order_id, actualTargetWeigh,
-                    actualVolume
-                  type: string
-              required:
-              - return_info
               title: extract_actuals_from_batch_reports结果
               type: object
           required:
@@ -517,13 +508,14 @@ reaction_station.bioyond:
           torque_variation: torque_variation
           volume: volume
         goal_default:
-          assign_material_name: ''
+          assign_material_name: BAPP
-          temperature: ''
+          temperature: 25.0
-          time: ''
+          time: '0'
-          titration_type: ''
+          titration_type: '1'
-          torque_variation: ''
+          torque_variation: 1
-          volume: ''
+          volume: '350'
         handles: {}
+        placeholder_keys: {}
         result: {}
         schema:
           description: 液体进料烧杯
@@ -532,36 +524,30 @@ reaction_station.bioyond:
             goal:
               properties:
                 assign_material_name:
+                  default: BAPP
                   description: 物料名称
                   type: string
                 temperature:
+                  default: 25.0
                   description: 温度设定(°C)
-                  type: string
+                  type: number
                 time:
+                  default: '0'
                   description: 观察时间(分钟)
                   type: string
                 titration_type:
+                  default: '1'
                   description: 是否滴定(NO=否, YES=是)
-                  enum:
-                  - 'NO'
-                  - 'YES'
                   type: string
                 torque_variation:
+                  default: 1
                   description: 是否观察 (NO=否, YES=是)
-                  enum:
+                  type: integer
-                  - 'NO'
-                  - 'YES'
-                  type: string
                 volume:
+                  default: '350'
                   description: 分液公式(mL)
                   type: string
-              required:
+              required: []
-              - volume
-              - assign_material_name
-              - time
-              - torque_variation
-              - titration_type
-              - temperature
               type: object
             result: {}
           required:
@@ -580,13 +566,13 @@ reaction_station.bioyond:
           torque_variation: torque_variation
           volume: volume
         goal_default:
-          assign_material_name: ''
+          assign_material_name: null
-          solvents: ''
+          solvents: null
-          temperature: '25.00'
+          temperature: 25.0
           time: '360'
           titration_type: '1'
-          torque_variation: '2'
+          torque_variation: 2
-          volume: ''
+          volume: null
         handles:
           input:
           - data_key: solvents
@@ -595,6 +581,7 @@ reaction_station.bioyond:
             handler_key: solvents
             io_type: source
             label: Solvents Data From Calculation Node
+        placeholder_keys: {}
         result: {}
         schema:
           description: 液体投料-溶剂。可以直接提供volume(mL),或通过solvents对象自动从additional_solvent(mL)计算volume。
@@ -609,27 +596,21 @@ reaction_station.bioyond:
                   description: '溶剂信息对象(可选),包含: additional_solvent(溶剂体积mL), total_liquid_volume(总液体体积mL)。如果提供,将自动计算volume'
                   type: string
                 temperature:
-                  default: '25.00'
+                  default: 25.0
                   description: 温度设定(°C),默认25.00
-                  type: string
+                  type: number
                 time:
                   default: '360'
                   description: 观察时间(分钟),默认360
                   type: string
                 titration_type:
-                  default: 'NO'
+                  default: '1'
                   description: 是否滴定(NO=否, YES=是),默认NO
-                  enum:
-                  - 'NO'
-                  - 'YES'
                   type: string
                 torque_variation:
-                  default: 'YES'
+                  default: 2
                   description: 是否观察 (NO=否, YES=是),默认YES
-                  enum:
+                  type: integer
-                  - 'NO'
-                  - 'YES'
-                  type: string
                 volume:
                   description: 分液量(mL)。可直接提供,或通过solvents参数自动计算
                   type: string
@@ -655,15 +636,15 @@ reaction_station.bioyond:
           volume_formula: volume_formula
           x_value: x_value
         goal_default:
-          assign_material_name: ''
+          assign_material_name: null
-          extracted_actuals: ''
+          extracted_actuals: null
-          feeding_order_data: ''
+          feeding_order_data: null
-          temperature: '25.00'
+          temperature: 25.0
           time: '90'
           titration_type: '2'
-          torque_variation: '2'
+          torque_variation: 2
-          volume_formula: ''
+          volume_formula: null
-          x_value: ''
+          x_value: null
         handles:
           input:
           - data_key: extracted_actuals
@@ -678,6 +659,7 @@ reaction_station.bioyond:
             handler_key: feeding_order
             io_type: source
             label: Feeding Order Data From Calculation Node
+        placeholder_keys: {}
         result: {}
         schema:
           description: 液体进料(滴定)。支持两种模式:1)直接提供volume_formula;2)自动计算-提供x_value+feeding_order_data+extracted_actuals,系统自动生成公式"1000*(m二酐-x)*V二酐滴定/m二酐滴定"
@@ -696,27 +678,21 @@ reaction_station.bioyond:
                     {"feeding_order": [{"type": "main_anhydride", "amount": 1.915}]}'
                   type: string
                 temperature:
-                  default: '25.00'
+                  default: 25.0
                   description: 温度设定(°C),默认25.00
-                  type: string
+                  type: number
                 time:
                   default: '90'
                   description: 观察时间(分钟),默认90
                   type: string
                 titration_type:
-                  default: 'YES'
+                  default: '2'
                   description: 是否滴定(NO=否, YES=是),默认YES
-                  enum:
-                  - 'NO'
-                  - 'YES'
                   type: string
                 torque_variation:
-                  default: 'YES'
+                  default: 2
                   description: 是否观察 (NO=否, YES=是),默认YES
-                  enum:
+                  type: integer
-                  - 'NO'
-                  - 'YES'
-                  type: string
                 volume_formula:
                   description: 分液公式(mL)。可直接提供固定公式,或留空由系统根据x_value、feeding_order_data、extracted_actuals自动生成
                   type: string
@@ -742,13 +718,14 @@ reaction_station.bioyond:
           torque_variation: torque_variation
           volume_formula: volume_formula
         goal_default:
-          assign_material_name: ''
+          assign_material_name: null
-          temperature: ''
+          temperature: 25.0
-          time: ''
+          time: '0'
-          titration_type: ''
+          titration_type: '1'
-          torque_variation: ''
+          torque_variation: 1
-          volume_formula: ''
+          volume_formula: null
         handles: {}
+        placeholder_keys: {}
         result: {}
         schema:
           description: 液体进料小瓶(非滴定)
@@ -760,33 +737,27 @@ reaction_station.bioyond:
                   description: 物料名称
                   type: string
                 temperature:
+                  default: 25.0
                   description: 温度设定(°C)
-                  type: string
+                  type: number
                 time:
+                  default: '0'
                   description: 观察时间(分钟)
                   type: string
                 titration_type:
+                  default: '1'
                   description: 是否滴定(NO=否, YES=是)
-                  enum:
-                  - 'NO'
-                  - 'YES'
                   type: string
                 torque_variation:
+                  default: 1
                   description: 是否观察 (NO=否, YES=是)
-                  enum:
+                  type: integer
-                  - 'NO'
-                  - 'YES'
-                  type: string
                 volume_formula:
                   description: 分液公式(mL)
                   type: string
               required:
               - volume_formula
               - assign_material_name
-              - time
-              - torque_variation
-              - titration_type
-              - temperature
               type: object
             result: {}
           required:
@@ -800,9 +771,10 @@ reaction_station.bioyond:
           task_name: task_name
           workflow_name: workflow_name
         goal_default:
-          task_name: ''
+          task_name: null
-          workflow_name: ''
+          workflow_name: null
         handles: {}
+        placeholder_keys: {}
         result: {}
         schema:
           description: 处理并执行工作流
@@ -820,7 +792,8 @@ reaction_station.bioyond:
               - workflow_name
               - task_name
               type: object
-            result: {}
+            result:
+              type: object
           required:
           - goal
           title: process_and_execute_workflow参数
@@ -833,10 +806,11 @@ reaction_station.bioyond:
           cutoff: cutoff
           temperature: temperature
         goal_default:
-          assign_material_name: ''
+          assign_material_name: null
-          cutoff: ''
+          cutoff: '900000'
-          temperature: ''
+          temperature: -10.0
         handles: {}
+        placeholder_keys: {}
         result: {}
         schema:
           description: 反应器放入 - 将反应器放入工作站，配置物料名称、粘度上限和温度参数
@@ -848,14 +822,14 @@ reaction_station.bioyond:
                   description: 物料名称
                   type: string
                 cutoff:
+                  default: '900000'
                   description: 粘度上限
                   type: string
                 temperature:
+                  default: -10.0
                   description: 温度设定(°C)
-                  type: string
+                  type: number
               required:
-              - cutoff
-              - temperature
               - assign_material_name
               type: object
             result: {}
@@ -869,6 +843,7 @@ reaction_station.bioyond:
         goal: {}
         goal_default: {}
         handles: {}
+        placeholder_keys: {}
         result: {}
         schema:
           description: 反应器取出 - 从工作站中取出反应器，无需参数的简单操作
@@ -878,15 +853,7 @@ reaction_station.bioyond:
               properties: {}
               required: []
               type: object
-            result:
+            result: {}
-              properties:
-                code:
-                  description: 操作结果代码(1表示成功,0表示失败)
-                  type: integer
-                return_info:
-                  description: 操作结果详细信息
-                  type: string
-              type: object
           required:
           - goal
           title: reactor_taken_out参数
@@ -897,8 +864,8 @@ reaction_station.bioyond:
         goal: {}
         goal_default: {}
         handles: {}
-        result:
+        placeholder_keys: {}
-          return_info: return_info
+        result: {}
         schema:
           description: 启动调度器 - 启动Bioyond工作站的任务调度器，开始执行队列中的任务
           properties:
@@ -908,12 +875,6 @@ reaction_station.bioyond:
               required: []
               type: object
             result:
-              properties:
-                return_info:
-                  description: 调度器启动结果，成功返回1，失败返回0
-                  type: integer
-              required:
-              - return_info
               title: scheduler_start结果
               type: object
           required:
@@ -930,12 +891,13 @@ reaction_station.bioyond:
           time: time
           torque_variation: torque_variation
         goal_default:
-          assign_material_name: ''
+          assign_material_name: null
-          material_id: ''
+          material_id: null
-          temperature: ''
+          temperature: 25.0
-          time: ''
+          time: '0'
-          torque_variation: ''
+          torque_variation: 1
         handles: {}
+        placeholder_keys: {}
         result: {}
         schema:
           description: 固体进料小瓶 - 通过小瓶向反应器中添加固体物料，支持多种粉末类型(盐、面粉、BTDA)
@@ -948,29 +910,21 @@ reaction_station.bioyond:
                   type: string
                 material_id:
                   description: 粉末类型ID，Salt=盐（21分钟），Flour=面粉（27分钟），BTDA=BTDA（38分钟）
-                  enum:
-                  - Salt
-                  - Flour
-                  - BTDA
                   type: string
                 temperature:
+                  default: 25.0
                   description: 温度设定(°C)
-                  type: string
+                  type: number
                 time:
+                  default: '0'
                   description: 观察时间(分钟)
                   type: string
                 torque_variation:
+                  default: 1
                   description: 是否观察 (NO=否, YES=是)
-                  enum:
+                  type: integer
-                  - 'NO'
-                  - 'YES'
-                  type: string
               required:
-              - assign_material_name
               - material_id
-              - time
-              - torque_variation
-              - temperature
               type: object
             result: {}
           required:

unilabos/registry/devices/robot_agv.yaml

@@ -37,42 +37,41 @@ agv.SEER:
           type: object
         type: UniLabJsonCommand
       send_nav_task:
-        feedback: {}
+        feedback:
+          status: status
         goal:
           command: command
         goal_default:
           command: ''
         handles: {}
+        placeholder_keys: {}
         result:
+          return_info: return_info
           success: success
         schema:
           description: ''
           properties:
             feedback:
+              additionalProperties: false
               properties:
                 status:
                   type: string
-              required:
-              - status
               title: SendCmd_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 command:
                   type: string
-              required:
-              - command
               title: SendCmd_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
                 success:
                   type: boolean
-              required:
-              - return_info
-              - success
               title: SendCmd_Result
               type: object
           required:

unilabos/registry/devices/robot_arm.yaml

@@ -122,31 +122,6 @@ robotic_arm.SCARA_with_slider.moveit.virtual:
           title: moveit_task参数
           type: object
         type: UniLabJsonCommand
-      auto-post_init:
-        feedback: {}
-        goal: {}
-        goal_default:
-          ros_node: null
-        handles: {}
-        placeholder_keys: {}
-        result: {}
-        schema:
-          description: post_init的参数schema
-          properties:
-            feedback: {}
-            goal:
-              properties:
-                ros_node:
-                  type: object
-              required:
-              - ros_node
-              type: object
-            result: {}
-          required:
-          - goal
-          title: post_init参数
-          type: object
-        type: UniLabJsonCommand
       auto-resource_manager:
         feedback: {}
         goal: {}
@@ -198,41 +173,41 @@ robotic_arm.SCARA_with_slider.moveit.virtual:
           type: object
         type: UniLabJsonCommand
       pick_and_place:
-        feedback: {}
+        feedback:
+          status: status
         goal:
           command: command
         goal_default:
           command: ''
         handles: {}
-        result: {}
+        placeholder_keys: {}
+        result:
+          return_info: return_info
+          success: success
         schema:
           description: ''
           properties:
             feedback:
+              additionalProperties: false
               properties:
                 status:
                   type: string
-              required:
-              - status
               title: SendCmd_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 command:
                   type: string
-              required:
-              - command
               title: SendCmd_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
                 success:
                   type: boolean
-              required:
-              - return_info
-              - success
               title: SendCmd_Result
               type: object
           required:
@@ -241,41 +216,41 @@ robotic_arm.SCARA_with_slider.moveit.virtual:
           type: object
         type: SendCmd
       set_position:
-        feedback: {}
+        feedback:
+          status: status
         goal:
           command: command
         goal_default:
           command: ''
         handles: {}
-        result: {}
+        placeholder_keys: {}
+        result:
+          return_info: return_info
+          success: success
         schema:
           description: ''
           properties:
             feedback:
+              additionalProperties: false
               properties:
                 status:
                   type: string
-              required:
-              - status
               title: SendCmd_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 command:
                   type: string
-              required:
-              - command
               title: SendCmd_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
                 success:
                   type: boolean
-              required:
-              - return_info
-              - success
               title: SendCmd_Result
               type: object
           required:
@@ -284,41 +259,41 @@ robotic_arm.SCARA_with_slider.moveit.virtual:
           type: object
         type: SendCmd
       set_status:
-        feedback: {}
+        feedback:
+          status: status
         goal:
           command: command
         goal_default:
           command: ''
         handles: {}
-        result: {}
+        placeholder_keys: {}
+        result:
+          return_info: return_info
+          success: success
         schema:
           description: ''
           properties:
             feedback:
+              additionalProperties: false
               properties:
                 status:
                   type: string
-              required:
-              - status
               title: SendCmd_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 command:
                   type: string
-              required:
-              - command
               title: SendCmd_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
                 success:
                   type: boolean
-              required:
-              - return_info
-              - success
               title: SendCmd_Result
               type: object
           required:
@@ -455,42 +430,41 @@ robotic_arm.UR:
           type: object
         type: UniLabJsonCommand
       move_pos_task:
-        feedback: {}
+        feedback:
+          status: status
         goal:
           command: command
         goal_default:
           command: ''
         handles: {}
+        placeholder_keys: {}
         result:
+          return_info: return_info
           success: success
         schema:
           description: ''
           properties:
             feedback:
+              additionalProperties: false
               properties:
                 status:
                   type: string
-              required:
-              - status
               title: SendCmd_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 command:
                   type: string
-              required:
-              - command
               title: SendCmd_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
                 success:
                   type: boolean
-              required:
-              - return_info
-              - success
               title: SendCmd_Result
               type: object
           required:
@@ -532,8 +506,8 @@ robotic_arm.UR:
           type: string
       required:
       - arm_pose
-      - gripper_pose
       - arm_status
+      - gripper_pose
       - gripper_status
       type: object
   version: 1.0.0
@@ -726,41 +700,41 @@ robotic_arm.elite:
           type: object
         type: UniLabJsonCommand
       modbus_task_cmd:
-        feedback: {}
+        feedback:
+          status: status
         goal:
           command: command
         goal_default:
           command: ''
         handles: {}
-        result: {}
+        placeholder_keys: {}
+        result:
+          return_info: return_info
+          success: success
         schema:
           description: ''
           properties:
             feedback:
+              additionalProperties: false
               properties:
                 status:
                   type: string
-              required:
-              - status
               title: SendCmd_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 command:
                   type: string
-              required:
-              - command
               title: SendCmd_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
                 success:
                   type: boolean
-              required:
-              - return_info
-              - success
               title: SendCmd_Result
               type: object
           required:
@@ -770,8 +744,8 @@ robotic_arm.elite:
         type: SendCmd
     module: unilabos.devices.arm.elite_robot:EliteRobot
     status_types:
-      actual_joint_positions: String
+      actual_joint_positions: ''
-      arm_pose: String
+      arm_pose: list[float]
     type: python
   config_info: []
   description: Elite robot arm
@@ -797,8 +771,8 @@ robotic_arm.elite:
             type: number
           type: array
       required:
-      - arm_pose
       - actual_joint_positions
+      - arm_pose
       type: object
   model:
     mesh: elite_robot

unilabos/registry/devices/robot_gripper.yaml

@@ -114,11 +114,12 @@ gripper.misumi_rz:
             goal:
               properties:
                 data:
-                  type: string
+                  type: object
               required:
               - data
               type: object
-            result: {}
+            result:
+              type: object
           required:
           - goal
           title: modbus_crc参数
@@ -398,30 +399,26 @@ gripper.misumi_rz:
           description: ''
           properties:
             feedback:
+              additionalProperties: false
               properties:
                 status:
                   type: string
-              required:
-              - status
               title: SendCmd_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 command:
                   type: string
-              required:
-              - command
               title: SendCmd_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
                 success:
                   type: boolean
-              required:
-              - return_info
-              - success
               title: SendCmd_Result
               type: object
           required:
@@ -504,71 +501,82 @@ gripper.mock:
         type: UniLabJsonCommand
       push_to:
         feedback:
-          effort: torque
+          effort: effort
           position: position
+          reached_goal: reached_goal
+          stalled: stalled
         goal:
-          command.max_effort: torque
+          command: command
-          command.position: position
+          position: position
+          torque: torque
+          velocity: velocity
         goal_default:
           command:
             max_effort: 0.0
             position: 0.0
         handles: {}
+        placeholder_keys: {}
         result:
-          effort: torque
+          effort: effort
           position: position
+          reached_goal: reached_goal
+          stalled: stalled
         schema:
           description: ''
           properties:
             feedback:
+              additionalProperties: false
               properties:
                 effort:
+                  maximum: 1.7976931348623157e+308
+                  minimum: -1.7976931348623157e+308
                   type: number
                 position:
+                  maximum: 1.7976931348623157e+308
+                  minimum: -1.7976931348623157e+308
                   type: number
                 reached_goal:
                   type: boolean
                 stalled:
                   type: boolean
-              required:
-              - position
-              - effort
-              - stalled
-              - reached_goal
               title: GripperCommand_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 command:
+                  additionalProperties: false
                   properties:
                     max_effort:
+                      maximum: 1.7976931348623157e+308
+                      minimum: -1.7976931348623157e+308
                       type: number
                     position:
+                      maximum: 1.7976931348623157e+308
+                      minimum: -1.7976931348623157e+308
                       type: number
                   required:
                   - position
                   - max_effort
                   title: command
                   type: object
-              required:
-              - command
               title: GripperCommand_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 effort:
+                  maximum: 1.7976931348623157e+308
+                  minimum: -1.7976931348623157e+308
                   type: number
                 position:
+                  maximum: 1.7976931348623157e+308
+                  minimum: -1.7976931348623157e+308
                   type: number
                 reached_goal:
                   type: boolean
                 stalled:
                   type: boolean
-              required:
-              - position
-              - effort
-              - stalled
-              - reached_goal
               title: GripperCommand_Result
               type: object
           required:
@@ -604,8 +612,8 @@ gripper.mock:
           type: number
       required:
       - position
-      - velocity
-      - torque
       - status
+      - torque
+      - velocity
       type: object
   version: 1.0.0

unilabos/registry/devices/robot_linear_motion.yaml

@@ -24,6 +24,27 @@ linear_motion.grbl:
           title: initialize参数
           type: object
         type: UniLabJsonCommand
+      auto-list:
+        feedback: {}
+        goal: {}
+        goal_default: {}
+        handles: {}
+        placeholder_keys: {}
+        result: {}
+        schema:
+          description: list的参数schema
+          properties:
+            feedback: {}
+            goal:
+              properties: {}
+              required: []
+              type: object
+            result: {}
+          required:
+          - goal
+          title: list参数
+          type: object
+        type: UniLabJsonCommand
       auto-set_position:
         feedback: {}
         goal: {}
@@ -93,44 +114,39 @@ linear_motion.grbl:
         type: UniLabJsonCommandAsync
       move_through_points:
         feedback:
-          current_pose.pose.position: position
+          current_pose: current_pose
-          estimated_time_remaining.sec: time_remaining
+          distance_remaining: distance_remaining
-          navigation_time.sec: time_spent
+          estimated_time_remaining: estimated_time_remaining
-          number_of_poses_remaining: pose_number_remaining
+          navigation_time: navigation_time
+          number_of_poses_remaining: number_of_poses_remaining
+          number_of_recoveries: number_of_recoveries
         goal:
-          poses[].pose.position: positions[]
+          behavior_tree: behavior_tree
+          poses: poses
+          positions: positions
         goal_default:
           behavior_tree: ''
-          poses:
+          poses: []
-          - header:
-              frame_id: ''
-              stamp:
-                nanosec: 0
-                sec: 0
-            pose:
-              orientation:
-                w: 1.0
-                x: 0.0
-                y: 0.0
-                z: 0.0
-              position:
-                x: 0.0
-                y: 0.0
-                z: 0.0
         handles: {}
-        result: {}
+        placeholder_keys: {}
+        result:
+          result: result
         schema:
           description: ''
           properties:
             feedback:
+              additionalProperties: false
               properties:
                 current_pose:
+                  additionalProperties: false
                   properties:
                     header:
+                      additionalProperties: false
                       properties:
                         frame_id:
                           type: string
                         stamp:
+                          additionalProperties: false
                           properties:
                             nanosec:
                               maximum: 4294967295
@@ -151,16 +167,26 @@ linear_motion.grbl:
                       title: header
                       type: object
                     pose:
+                      additionalProperties: false
                       properties:
                         orientation:
+                          additionalProperties: false
                           properties:
                             w:
+                              maximum: 1.7976931348623157e+308
+                              minimum: -1.7976931348623157e+308
                               type: number
                             x:
+                              maximum: 1.7976931348623157e+308
+                              minimum: -1.7976931348623157e+308
                               type: number
                             y:
+                              maximum: 1.7976931348623157e+308
+                              minimum: -1.7976931348623157e+308
                               type: number
                             z:
+                              maximum: 1.7976931348623157e+308
+                              minimum: -1.7976931348623157e+308
                               type: number
                           required:
                           - x
@@ -170,12 +196,19 @@ linear_motion.grbl:
                           title: orientation
                           type: object
                         position:
+                          additionalProperties: false
                           properties:
                             x:
+                              maximum: 1.7976931348623157e+308
+                              minimum: -1.7976931348623157e+308
                               type: number
                             y:
+                              maximum: 1.7976931348623157e+308
+                              minimum: -1.7976931348623157e+308
                               type: number
                             z:
+                              maximum: 1.7976931348623157e+308
+                              minimum: -1.7976931348623157e+308
                               type: number
                           required:
                           - x
@@ -194,8 +227,11 @@ linear_motion.grbl:
                   title: current_pose
                   type: object
                 distance_remaining:
+                  maximum: 3.4028235e+38
+                  minimum: -3.4028235e+38
                   type: number
                 estimated_time_remaining:
+                  additionalProperties: false
                   properties:
                     nanosec:
                       maximum: 4294967295
@@ -211,6 +247,7 @@ linear_motion.grbl:
                   title: estimated_time_remaining
                   type: object
                 navigation_time:
+                  additionalProperties: false
                   properties:
                     nanosec:
                       maximum: 4294967295
@@ -233,16 +270,10 @@ linear_motion.grbl:
                   maximum: 32767
                   minimum: -32768
                   type: integer
-              required:
-              - current_pose
-              - navigation_time
-              - estimated_time_remaining
-              - number_of_recoveries
-              - distance_remaining
-              - number_of_poses_remaining
               title: NavigateThroughPoses_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 behavior_tree:
                   type: string
@@ -256,12 +287,8 @@ linear_motion.grbl:
                           stamp:
                             properties:
                               nanosec:
-                                maximum: 4294967295
-                                minimum: 0
                                 type: integer
                               sec:
-                                maximum: 2147483647
-                                minimum: -2147483648
                                 type: integer
                             required:
                             - sec
@@ -314,23 +341,17 @@ linear_motion.grbl:
                     required:
                     - header
                     - pose
-                    title: poses
                     type: object
                   type: array
-              required:
-              - poses
-              - behavior_tree
               title: NavigateThroughPoses_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 result:
-                  properties: {}
+                  additionalProperties: true
-                  required: []
                   title: result
                   type: object
-              required:
-              - result
               title: NavigateThroughPoses_Result
               type: object
           required:
@@ -340,9 +361,15 @@ linear_motion.grbl:
         type: NavigateThroughPoses
       set_spindle_speed:
         feedback:
-          position: spindle_speed
+          error: error
+          header: header
+          position: position
+          velocity: velocity
         goal:
-          position: spindle_speed
+          max_velocity: max_velocity
+          min_duration: min_duration
+          position: position
+          spindle_speed: spindle_speed
         goal_default:
           max_velocity: 0.0
           min_duration:
@@ -350,19 +377,25 @@ linear_motion.grbl:
             sec: 0
           position: 0.0
         handles: {}
+        placeholder_keys: {}
         result: {}
         schema:
           description: ''
           properties:
             feedback:
+              additionalProperties: false
               properties:
                 error:
+                  maximum: 1.7976931348623157e+308
+                  minimum: -1.7976931348623157e+308
                   type: number
                 header:
+                  additionalProperties: false
                   properties:
                     frame_id:
                       type: string
                     stamp:
+                      additionalProperties: false
                       properties:
                         nanosec:
                           maximum: 4294967295
@@ -383,21 +416,24 @@ linear_motion.grbl:
                   title: header
                   type: object
                 position:
+                  maximum: 1.7976931348623157e+308
+                  minimum: -1.7976931348623157e+308
                   type: number
                 velocity:
+                  maximum: 1.7976931348623157e+308
+                  minimum: -1.7976931348623157e+308
                   type: number
-              required:
-              - header
-              - position
-              - velocity
-              - error
               title: SingleJointPosition_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 max_velocity:
+                  maximum: 1.7976931348623157e+308
+                  minimum: -1.7976931348623157e+308
                   type: number
                 min_duration:
+                  additionalProperties: false
                   properties:
                     nanosec:
                       maximum: 4294967295
@@ -413,16 +449,13 @@ linear_motion.grbl:
                   title: min_duration
                   type: object
                 position:
+                  maximum: 1.7976931348623157e+308
+                  minimum: -1.7976931348623157e+308
                   type: number
-              required:
-              - position
-              - min_duration
-              - max_velocity
               title: SingleJointPosition_Goal
               type: object
             result:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: SingleJointPosition_Result
               type: object
           required:
@@ -432,7 +465,7 @@ linear_motion.grbl:
         type: SingleJointPosition
     module: unilabos.devices.cnc.grbl_sync:GrblCNC
     status_types:
-      position: unilabos.messages:Point3D
+      position: Point3D
       spindle_speed: float
       status: str
     type: python
@@ -471,9 +504,9 @@ linear_motion.grbl:
         status:
           type: string
       required:
-      - status
       - position
       - spindle_speed
+      - status
       type: object
   version: 1.0.0
 linear_motion.toyo_xyz.sim:
@@ -600,31 +633,6 @@ linear_motion.toyo_xyz.sim:
           title: moveit_task参数
           type: object
         type: UniLabJsonCommand
-      auto-post_init:
-        feedback: {}
-        goal: {}
-        goal_default:
-          ros_node: null
-        handles: {}
-        placeholder_keys: {}
-        result: {}
-        schema:
-          description: post_init的参数schema
-          properties:
-            feedback: {}
-            goal:
-              properties:
-                ros_node:
-                  type: object
-              required:
-              - ros_node
-              type: object
-            result: {}
-          required:
-          - goal
-          title: post_init参数
-          type: object
-        type: UniLabJsonCommand
       auto-resource_manager:
         feedback: {}
         goal: {}
@@ -676,41 +684,41 @@ linear_motion.toyo_xyz.sim:
           type: object
         type: UniLabJsonCommand
       pick_and_place:
-        feedback: {}
+        feedback:
+          status: status
         goal:
           command: command
         goal_default:
           command: ''
         handles: {}
-        result: {}
+        placeholder_keys: {}
+        result:
+          return_info: return_info
+          success: success
         schema:
           description: ''
           properties:
             feedback:
+              additionalProperties: false
               properties:
                 status:
                   type: string
-              required:
-              - status
               title: SendCmd_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 command:
                   type: string
-              required:
-              - command
               title: SendCmd_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
                 success:
                   type: boolean
-              required:
-              - return_info
-              - success
               title: SendCmd_Result
               type: object
           required:
@@ -719,41 +727,41 @@ linear_motion.toyo_xyz.sim:
           type: object
         type: SendCmd
       set_position:
-        feedback: {}
+        feedback:
+          status: status
         goal:
           command: command
         goal_default:
           command: ''
         handles: {}
-        result: {}
+        placeholder_keys: {}
+        result:
+          return_info: return_info
+          success: success
         schema:
           description: ''
           properties:
             feedback:
+              additionalProperties: false
               properties:
                 status:
                   type: string
-              required:
-              - status
               title: SendCmd_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 command:
                   type: string
-              required:
-              - command
               title: SendCmd_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
                 success:
                   type: boolean
-              required:
-              - return_info
-              - success
               title: SendCmd_Result
               type: object
           required:
@@ -762,41 +770,41 @@ linear_motion.toyo_xyz.sim:
           type: object
         type: SendCmd
       set_status:
-        feedback: {}
+        feedback:
+          status: status
         goal:
           command: command
         goal_default:
           command: ''
         handles: {}
-        result: {}
+        placeholder_keys: {}
+        result:
+          return_info: return_info
+          success: success
         schema:
           description: ''
           properties:
             feedback:
+              additionalProperties: false
               properties:
                 status:
                   type: string
-              required:
-              - status
               title: SendCmd_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 command:
                   type: string
-              required:
-              - command
               title: SendCmd_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
                 success:
                   type: boolean
-              required:
-              - return_info
-              - success
               title: SendCmd_Result
               type: object
           required:
@@ -939,30 +947,26 @@ motor.iCL42:
           description: ''
           properties:
             feedback:
+              additionalProperties: false
               properties:
                 status:
                   type: string
-              required:
-              - status
               title: SendCmd_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 command:
                   type: string
-              required:
-              - command
               title: SendCmd_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
                 success:
                   type: boolean
-              required:
-              - return_info
-              - success
               title: SendCmd_Result
               type: object
           required:
@@ -1000,8 +1004,8 @@ motor.iCL42:
         success:
           type: boolean
       required:
-      - motor_position
       - is_executing_run
+      - motor_position
       - success
       type: object
   version: 1.0.0

unilabos/registry/devices/solid_dispenser.yaml

@@ -14,19 +14,24 @@ solid_dispenser.laiyu:
           powder_tube_number: 0
           target_tube_position: ''
         handles: {}
+        placeholder_keys: {}
         result:
           actual_mass_mg: actual_mass_mg
+          return_info: return_info
+          success: success
         schema:
           description: ''
           properties:
             feedback:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: SolidDispenseAddPowderTube_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 compound_mass:
+                  maximum: 1.7976931348623157e+308
+                  minimum: -1.7976931348623157e+308
                   type: number
                 powder_tube_number:
                   maximum: 2147483647
@@ -34,24 +39,19 @@ solid_dispenser.laiyu:
                   type: integer
                 target_tube_position:
                   type: string
-              required:
-              - powder_tube_number
-              - target_tube_position
-              - compound_mass
               title: SolidDispenseAddPowderTube_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 actual_mass_mg:
+                  maximum: 1.7976931348623157e+308
+                  minimum: -1.7976931348623157e+308
                   type: number
                 return_info:
                   type: string
                 success:
                   type: boolean
-              required:
-              - return_info
-              - actual_mass_mg
-              - success
               title: SolidDispenseAddPowderTube_Result
               type: object
           required:
@@ -74,11 +74,12 @@ solid_dispenser.laiyu:
             goal:
               properties:
                 data:
-                  type: string
+                  type: object
               required:
               - data
               type: object
-            result: {}
+            result:
+              type: object
           required:
           - goal
           title: calculate_crc参数
@@ -99,11 +100,12 @@ solid_dispenser.laiyu:
             goal:
               properties:
                 command:
-                  type: string
+                  type: object
               required:
               - command
               type: object
-            result: {}
+            result:
+              type: object
           required:
           - goal
           title: send_command参数
@@ -112,36 +114,37 @@ solid_dispenser.laiyu:
       discharge:
         feedback: {}
         goal:
-          float_input: float_input
+          float_in: float_in
         goal_default:
           float_in: 0.0
         handles: {}
-        result: {}
+        placeholder_keys: {}
+        result:
+          return_info: return_info
+          success: success
         schema:
           description: ''
           properties:
             feedback:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: FloatSingleInput_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 float_in:
+                  maximum: 1.7976931348623157e+308
+                  minimum: -1.7976931348623157e+308
                   type: number
-              required:
-              - float_in
               title: FloatSingleInput_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
                 success:
                   type: boolean
-              required:
-              - return_info
-              - success
               title: FloatSingleInput_Result
               type: object
           required:
@@ -156,32 +159,31 @@ solid_dispenser.laiyu:
         goal_default:
           string: ''
         handles: {}
-        result: {}
+        placeholder_keys: {}
+        result:
+          return_info: return_info
+          success: success
         schema:
           description: ''
           properties:
             feedback:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: StrSingleInput_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 string:
                   type: string
-              required:
-              - string
               title: StrSingleInput_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
                 success:
                   type: boolean
-              required:
-              - return_info
-              - success
               title: StrSingleInput_Result
               type: object
           required:
@@ -200,38 +202,41 @@ solid_dispenser.laiyu:
           y: 0.0
           z: 0.0
         handles: {}
-        result: {}
+        placeholder_keys: {}
+        result:
+          return_info: return_info
+          success: success
         schema:
           description: ''
           properties:
             feedback:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: Point3DSeparateInput_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 x:
+                  maximum: 1.7976931348623157e+308
+                  minimum: -1.7976931348623157e+308
                   type: number
                 y:
+                  maximum: 1.7976931348623157e+308
+                  minimum: -1.7976931348623157e+308
                   type: number
                 z:
+                  maximum: 1.7976931348623157e+308
+                  minimum: -1.7976931348623157e+308
                   type: number
-              required:
-              - x
-              - y
-              - z
               title: Point3DSeparateInput_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
                 success:
                   type: boolean
-              required:
-              - return_info
-              - success
               title: Point3DSeparateInput_Result
               type: object
           required:
@@ -246,34 +251,33 @@ solid_dispenser.laiyu:
         goal_default:
           int_input: 0
         handles: {}
-        result: {}
+        placeholder_keys: {}
+        result:
+          return_info: return_info
+          success: success
         schema:
           description: ''
           properties:
             feedback:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: IntSingleInput_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 int_input:
                   maximum: 2147483647
                   minimum: -2147483648
                   type: integer
-              required:
-              - int_input
               title: IntSingleInput_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
                 success:
                   type: boolean
-              required:
-              - return_info
-              - success
               title: IntSingleInput_Result
               type: object
           required:
@@ -288,34 +292,33 @@ solid_dispenser.laiyu:
         goal_default:
           int_input: 0
         handles: {}
-        result: {}
+        placeholder_keys: {}
+        result:
+          return_info: return_info
+          success: success
         schema:
           description: ''
           properties:
             feedback:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: IntSingleInput_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 int_input:
                   maximum: 2147483647
                   minimum: -2147483648
                   type: integer
-              required:
-              - int_input
               title: IntSingleInput_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
                 success:
                   type: boolean
-              required:
-              - return_info
-              - success
               title: IntSingleInput_Result
               type: object
           required:
@@ -328,26 +331,25 @@ solid_dispenser.laiyu:
         goal: {}
         goal_default: {}
         handles: {}
-        result: {}
+        placeholder_keys: {}
+        result:
+          return_info: return_info
         schema:
           description: ''
           properties:
             feedback:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: EmptyIn_Feedback
               type: object
             goal:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: EmptyIn_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
-              required:
-              - return_info
               title: EmptyIn_Result
               type: object
           required:

unilabos/registry/devices/temperature.yaml

@@ -34,7 +34,8 @@ chiller:
               - register_address
               - value
               type: object
-            result: {}
+            result:
+              type: object
           required:
           - goal
           title: build_modbus_frame参数
@@ -63,7 +64,8 @@ chiller:
               required:
               - temperature
               type: object
-            result: {}
+            result:
+              type: integer
           required:
           - goal
           title: convert_temperature_to_modbus_value参数
@@ -84,11 +86,12 @@ chiller:
             goal:
               properties:
                 data:
-                  type: string
+                  type: object
               required:
               - data
               type: object
-            result: {}
+            result:
+              type: object
           required:
           - goal
           title: modbus_crc参数
@@ -116,42 +119,41 @@ chiller:
           type: object
         type: UniLabJsonCommand
       set_temperature:
-        feedback: {}
+        feedback:
+          status: status
         goal:
           command: command
         goal_default:
           command: ''
         handles: {}
+        placeholder_keys: {}
         result:
+          return_info: return_info
           success: success
         schema:
           description: ''
           properties:
             feedback:
+              additionalProperties: false
               properties:
                 status:
                   type: string
-              required:
-              - status
               title: SendCmd_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 command:
                   type: string
-              required:
-              - command
               title: SendCmd_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
                 success:
                   type: boolean
-              required:
-              - return_info
-              - success
               title: SendCmd_Result
               type: object
           required:
@@ -266,9 +268,15 @@ heaterstirrer.dalong:
         feedback:
           status: status
         goal:
+          pressure: pressure
           purpose: purpose
+          reflux_solvent: reflux_solvent
+          stir: stir
+          stir_speed: stir_speed
           temp: temp
+          temp_spec: temp_spec
           time: time
+          time_spec: time_spec
           vessel: vessel
         goal_default:
           pressure: ''
@@ -301,20 +309,23 @@ heaterstirrer.dalong:
             sample_id: ''
             type: ''
         handles: {}
+        placeholder_keys: {}
         result:
+          message: message
+          return_info: return_info
           success: success
         schema:
           description: ''
           properties:
             feedback:
+              additionalProperties: false
               properties:
                 status:
                   type: string
-              required:
-              - status
               title: HeatChill_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 pressure:
                   type: string
@@ -325,8 +336,12 @@ heaterstirrer.dalong:
                 stir:
                   type: boolean
                 stir_speed:
+                  maximum: 1.7976931348623157e+308
+                  minimum: -1.7976931348623157e+308
                   type: number
                 temp:
+                  maximum: 1.7976931348623157e+308
+                  minimum: -1.7976931348623157e+308
                   type: number
                 temp_spec:
                   type: string
@@ -335,6 +350,7 @@ heaterstirrer.dalong:
                 time_spec:
                   type: string
                 vessel:
+                  additionalProperties: false
                   properties:
                     category:
                       type: string
@@ -353,16 +369,26 @@ heaterstirrer.dalong:
                     parent:
                       type: string
                     pose:
+                      additionalProperties: false
                       properties:
                         orientation:
+                          additionalProperties: false
                           properties:
                             w:
+                              maximum: 1.7976931348623157e+308
+                              minimum: -1.7976931348623157e+308
                               type: number
                             x:
+                              maximum: 1.7976931348623157e+308
+                              minimum: -1.7976931348623157e+308
                               type: number
                             y:
+                              maximum: 1.7976931348623157e+308
+                              minimum: -1.7976931348623157e+308
                               type: number
                             z:
+                              maximum: 1.7976931348623157e+308
+                              minimum: -1.7976931348623157e+308
                               type: number
                           required:
                           - x
@@ -372,12 +398,19 @@ heaterstirrer.dalong:
                           title: orientation
                           type: object
                         position:
+                          additionalProperties: false
                           properties:
                             x:
+                              maximum: 1.7976931348623157e+308
+                              minimum: -1.7976931348623157e+308
                               type: number
                             y:
+                              maximum: 1.7976931348623157e+308
+                              minimum: -1.7976931348623157e+308
                               type: number
                             z:
+                              maximum: 1.7976931348623157e+308
+                              minimum: -1.7976931348623157e+308
                               type: number
                           required:
                           - x
@@ -407,20 +440,10 @@ heaterstirrer.dalong:
                   - data
                   title: vessel
                   type: object
-              required:
-              - vessel
-              - temp
-              - time
-              - temp_spec
-              - time_spec
-              - pressure
-              - reflux_solvent
-              - stir
-              - stir_speed
-              - purpose
               title: HeatChill_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 message:
                   type: string
@@ -428,10 +451,6 @@ heaterstirrer.dalong:
                   type: string
                 success:
                   type: boolean
-              required:
-              - success
-              - message
-              - return_info
               title: HeatChill_Result
               type: object
           required:
@@ -440,42 +459,42 @@ heaterstirrer.dalong:
           type: object
         type: HeatChill
       set_temp_target:
-        feedback: {}
+        feedback:
+          status: status
         goal:
-          command: temp
+          command: command
+          temp: temp
         goal_default:
           command: ''
         handles: {}
+        placeholder_keys: {}
         result:
+          return_info: return_info
           success: success
         schema:
           description: ''
           properties:
             feedback:
+              additionalProperties: false
               properties:
                 status:
                   type: string
-              required:
-              - status
               title: SendCmd_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 command:
                   type: string
-              required:
-              - command
               title: SendCmd_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
                 success:
                   type: boolean
-              required:
-              - return_info
-              - success
               title: SendCmd_Result
               type: object
           required:
@@ -484,42 +503,42 @@ heaterstirrer.dalong:
           type: object
         type: SendCmd
       set_temp_warning:
-        feedback: {}
+        feedback:
+          status: status
         goal:
-          command: temp
+          command: command
+          temp: temp
         goal_default:
           command: ''
         handles: {}
+        placeholder_keys: {}
         result:
+          return_info: return_info
           success: success
         schema:
           description: ''
           properties:
             feedback:
+              additionalProperties: false
               properties:
                 status:
                   type: string
-              required:
-              - status
               title: SendCmd_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 command:
                   type: string
-              required:
-              - command
               title: SendCmd_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
                 success:
                   type: boolean
-              required:
-              - return_info
-              - success
               title: SendCmd_Result
               type: object
           required:
@@ -569,8 +588,8 @@ heaterstirrer.dalong:
       - status
       - stir_speed
       - temp
-      - temp_warning
       - temp_target
+      - temp_warning
       type: object
   version: 1.0.0
 tempsensor:
@@ -691,42 +710,41 @@ tempsensor:
           type: object
         type: UniLabJsonCommand
       set_warning:
-        feedback: {}
+        feedback:
+          status: status
         goal:
           command: command
         goal_default:
           command: ''
         handles: {}
+        placeholder_keys: {}
         result:
+          return_info: return_info
           success: success
         schema:
           description: ''
           properties:
             feedback:
+              additionalProperties: false
               properties:
                 status:
                   type: string
-              required:
-              - status
               title: SendCmd_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 command:
                   type: string
-              required:
-              - command
               title: SendCmd_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
                 success:
                   type: boolean
-              required:
-              - return_info
-              - success
               title: SendCmd_Result
               type: object
           required:

unilabos/registry/devices/xrd_d7mate.yaml

@@ -45,31 +45,6 @@ xrd_d7mate:
           title: connect参数
           type: object
         type: UniLabJsonCommand
-      auto-post_init:
-        feedback: {}
-        goal: {}
-        goal_default:
-          ros_node: null
-        handles: {}
-        placeholder_keys: {}
-        result: {}
-        schema:
-          description: ''
-          properties:
-            feedback: {}
-            goal:
-              properties:
-                ros_node:
-                  type: string
-              required:
-              - ros_node
-              type: object
-            result: {}
-          required:
-          - goal
-          title: post_init参数
-          type: object
-        type: UniLabJsonCommand
       auto-start_from_string:
         feedback: {}
         goal: {}
@@ -85,11 +60,14 @@ xrd_d7mate:
             goal:
               properties:
                 params:
-                  type: string
+                  anyOf:
+                  - type: string
+                  - type: object
               required:
               - params
               type: object
-            result: {}
+            result:
+              type: object
           required:
           - goal
           title: start_from_string参数
@@ -105,21 +83,18 @@ xrd_d7mate:
           description: ''
           properties:
             feedback:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: EmptyIn_Feedback
               type: object
             goal:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: EmptyIn_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
-              required:
-              - return_info
               title: EmptyIn_Result
               type: object
           required:
@@ -130,38 +105,38 @@ xrd_d7mate:
       get_sample_down:
         feedback: {}
         goal:
-          sample_station: 1
+          int_input: int_input
+          sample_station: sample_station
         goal_default:
           int_input: 0
         handles: {}
-        result: {}
+        placeholder_keys: {}
+        result:
+          return_info: return_info
+          success: success
         schema:
           description: ''
           properties:
             feedback:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: IntSingleInput_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 int_input:
                   maximum: 2147483647
                   minimum: -2147483648
                   type: integer
-              required:
-              - int_input
               title: IntSingleInput_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
                 success:
                   type: boolean
-              required:
-              - return_info
-              - success
               title: IntSingleInput_Result
               type: object
           required:
@@ -179,21 +154,18 @@ xrd_d7mate:
           description: ''
           properties:
             feedback:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: EmptyIn_Feedback
               type: object
             goal:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: EmptyIn_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
-              required:
-              - return_info
               title: EmptyIn_Result
               type: object
           required:
@@ -211,21 +183,18 @@ xrd_d7mate:
           description: ''
           properties:
             feedback:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: EmptyIn_Feedback
               type: object
             goal:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: EmptyIn_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
-              required:
-              - return_info
               title: EmptyIn_Result
               type: object
           required:
@@ -238,26 +207,25 @@ xrd_d7mate:
         goal: {}
         goal_default: {}
         handles: {}
-        result: {}
+        placeholder_keys: {}
+        result:
+          return_info: return_info
         schema:
           description: ''
           properties:
             feedback:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: EmptyIn_Feedback
               type: object
             goal:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: EmptyIn_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
-              required:
-              - return_info
               title: EmptyIn_Result
               type: object
           required:
@@ -274,42 +242,35 @@ xrd_d7mate:
           sample_id: ''
           start_theta: 10.0
         goal_default:
-          end_theta: 80.0
+          end_theta: null
-          exp_time: 0.5
+          exp_time: null
-          increment: 0.02
+          increment: null
-          sample_id: Sample001
+          sample_id: null
-          start_theta: 10.0
+          start_theta: null
         handles: {}
+        placeholder_keys: {}
         result: {}
         schema:
           description: 送样完成后，发送样品信息和采集参数
           properties:
             feedback:
-              properties: {}
-              required: []
               title: SampleReadyInput_Feedback
-              type: object
             goal:
               properties:
                 end_theta:
                   description: 结束角度（≥5.5°，且必须大于start_theta）
-                  minimum: 5.5
                   type: number
                 exp_time:
                   description: 曝光时间（0.1-5.0秒）
-                  maximum: 5.0
-                  minimum: 0.1
                   type: number
                 increment:
                   description: 角度增量（≥0.005）
-                  minimum: 0.005
                   type: number
                 sample_id:
                   description: 样品标识符
                   type: string
                 start_theta:
                   description: 起始角度（≥5°）
-                  minimum: 5.0
                   type: number
               required:
               - sample_id
@@ -320,19 +281,11 @@ xrd_d7mate:
               title: SampleReadyInput_Goal
               type: object
             result:
-              properties:
-                return_info:
-                  type: string
-                success:
-                  type: boolean
-              required:
-              - return_info
-              - success
               title: SampleReadyInput_Result
               type: object
           required:
           - goal
-          title: SampleReadyInput
+          title: send_sample_ready参数
           type: object
         type: UniLabJsonCommand
       set_power_off:
@@ -340,26 +293,25 @@ xrd_d7mate:
         goal: {}
         goal_default: {}
         handles: {}
-        result: {}
+        placeholder_keys: {}
+        result:
+          return_info: return_info
         schema:
           description: ''
           properties:
             feedback:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: EmptyIn_Feedback
               type: object
             goal:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: EmptyIn_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
-              required:
-              - return_info
               title: EmptyIn_Result
               type: object
           required:
@@ -372,26 +324,25 @@ xrd_d7mate:
         goal: {}
         goal_default: {}
         handles: {}
-        result: {}
+        placeholder_keys: {}
+        result:
+          return_info: return_info
         schema:
           description: ''
           properties:
             feedback:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: EmptyIn_Feedback
               type: object
             goal:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: EmptyIn_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
-              required:
-              - return_info
               title: EmptyIn_Result
               type: object
           required:
@@ -405,18 +356,16 @@ xrd_d7mate:
           current: 30.0
           voltage: 40.0
         goal_default:
-          current: 30.0
+          current: null
-          voltage: 40.0
+          voltage: null
         handles: {}
+        placeholder_keys: {}
         result: {}
         schema:
           description: 设置高压电源电压和电流
           properties:
             feedback:
-              properties: {}
-              required: []
               title: VoltageCurrentInput_Feedback
-              type: object
             goal:
               properties:
                 current:
@@ -431,19 +380,11 @@ xrd_d7mate:
               title: VoltageCurrentInput_Goal
               type: object
             result:
-              properties:
-                return_info:
-                  type: string
-                success:
-                  type: boolean
-              required:
-              - return_info
-              - success
               title: VoltageCurrentInput_Result
               type: object
           required:
           - goal
-          title: VoltageCurrentInput
+          title: set_voltage_current参数
           type: object
         type: UniLabJsonCommand
       start:
@@ -453,11 +394,12 @@ xrd_d7mate:
           end_theta: 80.0
           exp_time: 0.1
           increment: 0.05
-          sample_id: 样品名称
+          sample_id: ''
           start_theta: 10.0
           string: ''
           wait_minutes: 3.0
         handles: {}
+        placeholder_keys: {}
         result: {}
         schema:
           description: 启动自动模式→上样→等待→样品准备→监控→检测下样位→执行下样流程。
@@ -466,54 +408,42 @@ xrd_d7mate:
             goal:
               properties:
                 end_theta:
+                  default: 80.0
                   description: 结束角度（≥5.5°，且必须大于start_theta）
-                  minimum: 5.5
+                  type: number
-                  type: string
                 exp_time:
+                  default: 0.1
                   description: 曝光时间（0.1-5.0秒）
-                  maximum: 5.0
+                  type: number
-                  minimum: 0.1
-                  type: string
                 increment:
+                  default: 0.05
                   description: 角度增量（≥0.005）
-                  minimum: 0.005
+                  type: number
-                  type: string
                 sample_id:
+                  default: ''
                   description: 样品标识符
                   type: string
                 start_theta:
+                  default: 10.0
                   description: 起始角度（≥5°）
-                  minimum: 5.0
+                  type: number
-                  type: string
                 string:
+                  default: ''
                   description: 字符串格式的参数输入，如果提供则优先解析使用
                   type: string
                 wait_minutes:
+                  default: 3.0
                   description: 允许上样后等待分钟数
-                  minimum: 0.0
                   type: number
-              required:
+              required: []
-              - sample_id
-              - start_theta
-              - end_theta
-              - increment
-              - exp_time
               title: StartWorkflow_Goal
               type: object
             result:
-              properties:
-                return_info:
-                  type: string
-                success:
-                  type: boolean
-              required:
-              - return_info
-              - success
               title: StartWorkflow_Result
               type: object
           required:
           - goal
-          title: StartWorkflow
+          title: start参数
           type: object
         type: UniLabJsonCommand
       start_auto_mode:
@@ -521,17 +451,15 @@ xrd_d7mate:
         goal:
           status: true
         goal_default:
-          status: true
+          status: null
         handles: {}
+        placeholder_keys: {}
         result: {}
         schema:
           description: 启动或停止自动模式
           properties:
             feedback:
-              properties: {}
-              required: []
               title: BoolSingleInput_Feedback
-              type: object
             goal:
               properties:
                 status:
@@ -542,25 +470,16 @@ xrd_d7mate:
               title: BoolSingleInput_Goal
               type: object
             result:
-              properties:
-                return_info:
-                  type: string
-                success:
-                  type: boolean
-              required:
-              - return_info
-              - success
               title: BoolSingleInput_Result
               type: object
           required:
           - goal
-          title: BoolSingleInput
+          title: start_auto_mode参数
           type: object
         type: UniLabJsonCommand
     module: unilabos.devices.xrd_d7mate.xrd_d7mate:XRDClient
     status_types:
       current_acquire_data: dict
-      sample_down: dict
       sample_request: dict
       sample_status: dict
     type: python
@@ -586,16 +505,13 @@ xrd_d7mate:
       properties:
         current_acquire_data:
           type: object
-        sample_down:
-          type: object
         sample_request:
           type: object
         sample_status:
           type: object
       required:
-      - sample_request
       - current_acquire_data
+      - sample_request
       - sample_status
-      - sample_down
       type: object
   version: 1.0.0

unilabos/registry/devices/zhida_gcms.yaml

@@ -8,26 +8,25 @@ zhida_gcms:
         goal: {}
         goal_default: {}
         handles: {}
-        result: {}
+        placeholder_keys: {}
+        result:
+          return_info: return_info
         schema:
           description: ''
           properties:
             feedback:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: EmptyIn_Feedback
               type: object
             goal:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: EmptyIn_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
-              required:
-              - return_info
               title: EmptyIn_Result
               type: object
           required:
@@ -77,31 +76,6 @@ zhida_gcms:
           title: connect参数
           type: object
         type: UniLabJsonCommand
-      auto-post_init:
-        feedback: {}
-        goal: {}
-        goal_default:
-          ros_node: null
-        handles: {}
-        placeholder_keys: {}
-        result: {}
-        schema:
-          description: ''
-          properties:
-            feedback: {}
-            goal:
-              properties:
-                ros_node:
-                  type: string
-              required:
-              - ros_node
-              type: object
-            result: {}
-          required:
-          - goal
-          title: post_init参数
-          type: object
-        type: UniLabJsonCommand
       get_methods:
         feedback: {}
         goal: {}
@@ -112,21 +86,18 @@ zhida_gcms:
           description: ''
           properties:
             feedback:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: EmptyIn_Feedback
               type: object
             goal:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: EmptyIn_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
-              required:
-              - return_info
               title: EmptyIn_Result
               type: object
           required:
@@ -144,21 +115,18 @@ zhida_gcms:
           description: ''
           properties:
             feedback:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: EmptyIn_Feedback
               type: object
             goal:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: EmptyIn_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
-              required:
-              - return_info
               title: EmptyIn_Result
               type: object
           required:
@@ -176,21 +144,18 @@ zhida_gcms:
           description: ''
           properties:
             feedback:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: EmptyIn_Feedback
               type: object
             goal:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: EmptyIn_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
-              required:
-              - return_info
               title: EmptyIn_Result
               type: object
           required:
@@ -203,26 +168,25 @@ zhida_gcms:
         goal: {}
         goal_default: {}
         handles: {}
-        result: {}
+        placeholder_keys: {}
+        result:
+          return_info: return_info
         schema:
           description: ''
           properties:
             feedback:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: EmptyIn_Feedback
               type: object
             goal:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: EmptyIn_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
-              required:
-              - return_info
               title: EmptyIn_Result
               type: object
           required:
@@ -234,35 +198,35 @@ zhida_gcms:
         feedback: {}
         goal:
           string: string
+          text: text
         goal_default:
           string: ''
         handles: {}
-        result: {}
+        placeholder_keys: {}
+        result:
+          return_info: return_info
+          success: success
         schema:
           description: ''
           properties:
             feedback:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: StrSingleInput_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 string:
                   type: string
-              required:
-              - string
               title: StrSingleInput_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
                 success:
                   type: boolean
-              required:
-              - return_info
-              - success
               title: StrSingleInput_Result
               type: object
           required:
@@ -273,36 +237,36 @@ zhida_gcms:
       start_with_csv_file:
         feedback: {}
         goal:
+          csv_file_path: csv_file_path
           string: string
         goal_default:
           string: ''
         handles: {}
-        result: {}
+        placeholder_keys: {}
+        result:
+          return_info: return_info
+          success: success
         schema:
           description: ''
           properties:
             feedback:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: StrSingleInput_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 string:
                   type: string
-              required:
-              - string
               title: StrSingleInput_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
                 success:
                   type: boolean
-              required:
-              - return_info
-              - success
               title: StrSingleInput_Result
               type: object
           required:
@@ -343,8 +307,8 @@ zhida_gcms:
         version:
           type: object
       required:
-      - status
       - methods
+      - status
       - version
       type: object
   version: 1.0.0

unilabos/registry/resources/bioyond/YB_bottle.yaml

@@ -9,7 +9,6 @@ YB_20ml_fenyeping:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 YB_5ml_fenyeping:
   category:
@@ -22,7 +21,6 @@ YB_5ml_fenyeping:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 YB_jia_yang_tou_da:
   category:
@@ -35,7 +33,6 @@ YB_jia_yang_tou_da:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 YB_pei_ye_da_Bottle:
   category:
@@ -48,7 +45,6 @@ YB_pei_ye_da_Bottle:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 YB_pei_ye_xiao_Bottle:
   category:
@@ -61,7 +57,6 @@ YB_pei_ye_xiao_Bottle:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 YB_qiang_tou:
   category:
@@ -74,7 +69,6 @@ YB_qiang_tou:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 YB_ye_Bottle:
   category:
@@ -88,5 +82,4 @@ YB_ye_Bottle:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0

unilabos/registry/resources/bioyond/YB_bottle_carriers.yaml

@@ -9,7 +9,6 @@ YB_100ml_yeti:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 YB_20ml_fenyepingban:
   category:
@@ -22,7 +21,6 @@ YB_20ml_fenyepingban:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 YB_5ml_fenyepingban:
   category:
@@ -35,7 +33,6 @@ YB_5ml_fenyepingban:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 YB_6StockCarrier:
   category:
@@ -48,7 +45,6 @@ YB_6StockCarrier:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 YB_6VialCarrier:
   category:
@@ -61,7 +57,6 @@ YB_6VialCarrier:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 YB_gao_nian_ye_Bottle:
   category:
@@ -74,7 +69,6 @@ YB_gao_nian_ye_Bottle:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 YB_gaonianye:
   category:
@@ -87,7 +81,6 @@ YB_gaonianye:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 YB_jia_yang_tou_da_Carrier:
   category:
@@ -100,7 +93,6 @@ YB_jia_yang_tou_da_Carrier:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 YB_peiyepingdaban:
   category:
@@ -113,7 +105,6 @@ YB_peiyepingdaban:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 YB_peiyepingxiaoban:
   category:
@@ -126,7 +117,6 @@ YB_peiyepingxiaoban:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 YB_qiang_tou_he:
   category:
@@ -139,7 +129,6 @@ YB_qiang_tou_he:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 YB_shi_pei_qi_kuai:
   category:
@@ -152,7 +141,6 @@ YB_shi_pei_qi_kuai:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 YB_ye:
   category:
@@ -165,7 +153,6 @@ YB_ye:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 YB_ye_100ml_Bottle:
   category:
@@ -178,5 +165,4 @@ YB_ye_100ml_Bottle:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0

unilabos/registry/resources/bioyond/bottle_carriers.yaml

@@ -8,7 +8,6 @@ BIOYOND_PolymerStation_1BottleCarrier:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 BIOYOND_PolymerStation_1FlaskCarrier:
   category:
@@ -20,7 +19,6 @@ BIOYOND_PolymerStation_1FlaskCarrier:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 BIOYOND_PolymerStation_6StockCarrier:
   category:
@@ -32,7 +30,6 @@ BIOYOND_PolymerStation_6StockCarrier:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 BIOYOND_PolymerStation_8StockCarrier:
   category:
@@ -44,5 +41,4 @@ BIOYOND_PolymerStation_8StockCarrier:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0

unilabos/registry/resources/bioyond/deck.yaml

@@ -8,7 +8,6 @@ BIOYOND_PolymerPreparationStation_Deck:
   handles: []
   icon: 配液站.webp
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 BIOYOND_PolymerReactionStation_Deck:
   category:
@@ -20,7 +19,6 @@ BIOYOND_PolymerReactionStation_Deck:
   handles: []
   icon: 反应站.webp
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 BIOYOND_YB_Deck:
   category:
@@ -32,7 +30,6 @@ BIOYOND_YB_Deck:
   handles: []
   icon: 配液站.webp
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 CoincellDeck:
   category:
@@ -44,5 +41,4 @@ CoincellDeck:
   handles: []
   icon: koudian.webp
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0

unilabos/registry/resources/common/resource_container.yaml

@@ -1,24 +1,3 @@
-disposal:
-  category:
-  - disposal
-  - waste
-  - resource_container
-  class:
-    module: unilabos.resources.disposal:Disposal
-    type: unilabos
-  description: 废料处理位置，用于处理实验废料
-  handles:
-  - data_key: disposal_access
-    data_source: handle
-    data_type: fluid
-    handler_key: access
-    io_type: target
-    label: access
-    side: NORTH
-  icon: ''
-  init_param_schema: {}
-  registry_type: resource
-  version: 1.0.0
 hplc_plate:
   category:
   - resource_container
@@ -40,56 +19,6 @@ hplc_plate:
     - 3.1416
     path: https://uni-lab.oss-cn-zhangjiakou.aliyuncs.com/uni-lab/resources/hplc_plate/modal.xacro
     type: resource
-  registry_type: resource
-  version: 1.0.0
-maintenance:
-  category:
-  - maintenance
-  - position
-  - resource_container
-  class:
-    module: unilabos.resources.maintenance:Maintenance
-    type: unilabos
-  description: 维护位置，用于设备维护和校准
-  handles:
-  - data_key: maintenance_access
-    data_source: handle
-    data_type: mechanical
-    handler_key: access
-    io_type: target
-    label: access
-    side: NORTH
-  icon: ''
-  init_param_schema: {}
-  registry_type: resource
-  version: 1.0.0
-plate:
-  category:
-  - plate
-  - labware
-  - resource_container
-  class:
-    module: unilabos.resources.plate:Plate
-    type: unilabos
-  description: 实验板，用于放置样品和试剂
-  handles:
-  - data_key: plate_access
-    data_source: handle
-    data_type: mechanical
-    handler_key: access
-    io_type: target
-    label: access
-    side: NORTH
-  - data_key: sample_wells
-    data_source: handle
-    data_type: fluid
-    handler_key: wells
-    io_type: target
-    label: wells
-    side: CENTER
-  icon: ''
-  init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 plate_96:
   category:
@@ -112,7 +41,6 @@ plate_96:
     - 0
     path: https://uni-lab.oss-cn-zhangjiakou.aliyuncs.com/uni-lab/resources/plate_96/modal.xacro
     type: resource
-  registry_type: resource
   version: 1.0.0
 plate_96_high:
   category:
@@ -135,35 +63,6 @@ plate_96_high:
     - 1.5708
     path: https://uni-lab.oss-cn-zhangjiakou.aliyuncs.com/uni-lab/resources/plate_96_high/modal.xacro
     type: resource
-  registry_type: resource
-  version: 1.0.0
-tip_rack:
-  category:
-  - tip_rack
-  - labware
-  - resource_container
-  class:
-    module: unilabos.resources.tip_rack:TipRack
-    type: unilabos
-  description: 枪头架资源，用于存放和管理移液器枪头
-  handles:
-  - data_key: tip_access
-    data_source: handle
-    data_type: mechanical
-    handler_key: access
-    io_type: target
-    label: access
-    side: NORTH
-  - data_key: tip_pickup
-    data_source: handle
-    data_type: mechanical
-    handler_key: pickup
-    io_type: target
-    label: pickup
-    side: SOUTH
-  icon: ''
-  init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 tiprack_96_high:
   category:
@@ -195,7 +94,6 @@ tiprack_96_high:
     - 1.5708
     path: https://uni-lab.oss-cn-zhangjiakou.aliyuncs.com/uni-lab/resources/tiprack_96_high/modal.xacro
     type: resource
-  registry_type: resource
   version: 1.0.0
 tiprack_box:
   category:
@@ -227,5 +125,4 @@ tiprack_box:
     - 0
     path: https://uni-lab.oss-cn-zhangjiakou.aliyuncs.com/uni-lab/resources/tiprack_box/modal.xacro
     type: resource
-  registry_type: resource
   version: 1.0.0

unilabos/registry/resources/laiyu/container.yaml

@@ -29,7 +29,6 @@ bottle_container:
     - 0
     path: https://uni-lab.oss-cn-zhangjiakou.aliyuncs.com/uni-lab/resources/bottle_container/modal.xacro
     type: resource
-  registry_type: resource
   version: 1.0.0
 tube_container:
   category:
@@ -62,5 +61,4 @@ tube_container:
     - 0
     path: https://uni-lab.oss-cn-zhangjiakou.aliyuncs.com/uni-lab/resources/tube_container/modal.xacro
     type: resource
-  registry_type: resource
   version: 1.0.0

unilabos/registry/resources/laiyu/deck.yaml

@@ -12,5 +12,4 @@ TransformXYZDeck:
     mesh: liquid_transform_xyz
     path: https://uni-lab.oss-cn-zhangjiakou.aliyuncs.com/uni-lab/devices/liquid_transform_xyz/macro_device.xacro
     type: device
-  registry_type: resource
   version: 1.0.0

unilabos/registry/resources/opentrons/deck.yaml

@@ -12,7 +12,6 @@ OTDeck:
     mesh: opentrons_liquid_handler
     path: https://uni-lab.oss-cn-zhangjiakou.aliyuncs.com/uni-lab/devices/opentrons_liquid_handler/macro_device.xacro
     type: device
-  registry_type: resource
   version: 1.0.0
 hplc_station:
   category:
@@ -28,5 +27,4 @@ hplc_station:
     mesh: hplc_station
     path: https://uni-lab.oss-cn-zhangjiakou.aliyuncs.com/uni-lab/devices/hplc_station/macro_device.xacro
     type: device
-  registry_type: resource
   version: 1.0.0

unilabos/registry/resources/opentrons/plate_adapters.yaml

@@ -8,5 +8,4 @@ Opentrons_96_adapter_Vb:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0

unilabos/registry/resources/opentrons/plates.yaml

@@ -8,7 +8,6 @@ appliedbiosystemsmicroamp_384_wellplate_40ul:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 biorad_384_wellplate_50ul:
   category:
@@ -20,7 +19,6 @@ biorad_384_wellplate_50ul:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 biorad_96_wellplate_200ul_pcr:
   category:
@@ -32,7 +30,6 @@ biorad_96_wellplate_200ul_pcr:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 corning_12_wellplate_6point9ml_flat:
   category:
@@ -44,7 +41,6 @@ corning_12_wellplate_6point9ml_flat:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 corning_24_wellplate_3point4ml_flat:
   category:
@@ -56,7 +52,6 @@ corning_24_wellplate_3point4ml_flat:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 corning_384_wellplate_112ul_flat:
   category:
@@ -68,7 +63,6 @@ corning_384_wellplate_112ul_flat:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 corning_48_wellplate_1point6ml_flat:
   category:
@@ -80,7 +74,6 @@ corning_48_wellplate_1point6ml_flat:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 corning_6_wellplate_16point8ml_flat:
   category:
@@ -92,7 +85,6 @@ corning_6_wellplate_16point8ml_flat:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 corning_96_wellplate_360ul_flat:
   category:
@@ -104,7 +96,6 @@ corning_96_wellplate_360ul_flat:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 nest_96_wellplate_100ul_pcr_full_skirt:
   category:
@@ -136,7 +127,6 @@ nest_96_wellplate_100ul_pcr_full_skirt:
     - 1.5708
     path: https://uni-lab.oss-cn-zhangjiakou.aliyuncs.com/uni-lab/resources/tecan_nested_tip_rack/modal.xacro
     type: resource
-  registry_type: resource
   version: 1.0.0
 nest_96_wellplate_200ul_flat:
   category:
@@ -148,7 +138,6 @@ nest_96_wellplate_200ul_flat:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 nest_96_wellplate_2ml_deep:
   category:
@@ -171,7 +160,6 @@ nest_96_wellplate_2ml_deep:
     - 1.5708
     path: https://uni-lab.oss-cn-zhangjiakou.aliyuncs.com/uni-lab/resources/tecan_nested_tip_rack/modal.xacro
     type: resource
-  registry_type: resource
   version: 1.0.0
 thermoscientificnunc_96_wellplate_1300ul:
   category:
@@ -183,7 +171,6 @@ thermoscientificnunc_96_wellplate_1300ul:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 thermoscientificnunc_96_wellplate_2000ul:
   category:
@@ -195,7 +182,6 @@ thermoscientificnunc_96_wellplate_2000ul:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 usascientific_96_wellplate_2point4ml_deep:
   category:
@@ -207,5 +193,4 @@ usascientific_96_wellplate_2point4ml_deep:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0

unilabos/registry/resources/opentrons/reservoirs.yaml

@@ -8,7 +8,6 @@ agilent_1_reservoir_290ml:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 axygen_1_reservoir_90ml:
   category:
@@ -20,7 +19,6 @@ axygen_1_reservoir_90ml:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 nest_12_reservoir_15ml:
   category:
@@ -32,7 +30,6 @@ nest_12_reservoir_15ml:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 nest_1_reservoir_195ml:
   category:
@@ -44,7 +41,6 @@ nest_1_reservoir_195ml:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 nest_1_reservoir_290ml:
   category:
@@ -56,7 +52,6 @@ nest_1_reservoir_290ml:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 usascientific_12_reservoir_22ml:
   category:
@@ -68,5 +63,4 @@ usascientific_12_reservoir_22ml:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0

unilabos/registry/resources/opentrons/tip_racks.yaml

@@ -8,7 +8,6 @@ eppendorf_96_tiprack_1000ul_eptips:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 eppendorf_96_tiprack_10ul_eptips:
   category:
@@ -20,7 +19,6 @@ eppendorf_96_tiprack_10ul_eptips:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 geb_96_tiprack_1000ul:
   category:
@@ -32,7 +30,6 @@ geb_96_tiprack_1000ul:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 geb_96_tiprack_10ul:
   category:
@@ -44,7 +41,6 @@ geb_96_tiprack_10ul:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 opentrons_96_filtertiprack_1000ul:
   category:
@@ -75,7 +71,6 @@ opentrons_96_filtertiprack_1000ul:
     - 1.5708
     path: https://uni-lab.oss-cn-zhangjiakou.aliyuncs.com/uni-lab/resources/tecan_nested_tip_rack/modal.xacro
     type: resource
-  registry_type: resource
   version: 1.0.0
 opentrons_96_filtertiprack_10ul:
   category:
@@ -87,7 +82,6 @@ opentrons_96_filtertiprack_10ul:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 opentrons_96_filtertiprack_200ul:
   category:
@@ -99,7 +93,6 @@ opentrons_96_filtertiprack_200ul:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 opentrons_96_filtertiprack_20ul:
   category:
@@ -111,7 +104,6 @@ opentrons_96_filtertiprack_20ul:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 opentrons_96_tiprack_1000ul:
   category:
@@ -123,7 +115,6 @@ opentrons_96_tiprack_1000ul:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 opentrons_96_tiprack_10ul:
   category:
@@ -135,7 +126,6 @@ opentrons_96_tiprack_10ul:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 opentrons_96_tiprack_20ul:
   category:
@@ -147,7 +137,6 @@ opentrons_96_tiprack_20ul:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 opentrons_96_tiprack_300ul:
   category:

unilabos/registry/resources/opentrons/tube_racks.yaml

@@ -8,7 +8,6 @@ opentrons_10_tuberack_falcon_4x50ml_6x15ml_conical:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 opentrons_10_tuberack_falcon_4x50ml_6x15ml_conical_acrylic:
   category:
@@ -20,7 +19,6 @@ opentrons_10_tuberack_falcon_4x50ml_6x15ml_conical_acrylic:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 opentrons_10_tuberack_nest_4x50ml_6x15ml_conical:
   category:
@@ -32,7 +30,6 @@ opentrons_10_tuberack_nest_4x50ml_6x15ml_conical:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 opentrons_15_tuberack_falcon_15ml_conical:
   category:
@@ -44,7 +41,6 @@ opentrons_15_tuberack_falcon_15ml_conical:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 opentrons_15_tuberack_nest_15ml_conical:
   category:
@@ -56,7 +52,6 @@ opentrons_15_tuberack_nest_15ml_conical:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 opentrons_24_aluminumblock_generic_2ml_screwcap:
   category:
@@ -68,7 +63,6 @@ opentrons_24_aluminumblock_generic_2ml_screwcap:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 opentrons_24_aluminumblock_nest_1point5ml_snapcap:
   category:
@@ -80,7 +74,6 @@ opentrons_24_aluminumblock_nest_1point5ml_snapcap:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 opentrons_24_tuberack_eppendorf_1point5ml_safelock_snapcap:
   category:
@@ -92,7 +85,6 @@ opentrons_24_tuberack_eppendorf_1point5ml_safelock_snapcap:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 opentrons_24_tuberack_eppendorf_2ml_safelock_snapcap:
   category:
@@ -104,7 +96,6 @@ opentrons_24_tuberack_eppendorf_2ml_safelock_snapcap:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 opentrons_24_tuberack_eppendorf_2ml_safelock_snapcap_acrylic:
   category:
@@ -116,7 +107,6 @@ opentrons_24_tuberack_eppendorf_2ml_safelock_snapcap_acrylic:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 opentrons_24_tuberack_generic_0point75ml_snapcap_acrylic:
   category:
@@ -128,7 +118,6 @@ opentrons_24_tuberack_generic_0point75ml_snapcap_acrylic:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 opentrons_24_tuberack_generic_2ml_screwcap:
   category:
@@ -140,7 +129,6 @@ opentrons_24_tuberack_generic_2ml_screwcap:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 opentrons_24_tuberack_nest_0point5ml_screwcap:
   category:
@@ -152,7 +140,6 @@ opentrons_24_tuberack_nest_0point5ml_screwcap:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 opentrons_24_tuberack_nest_1point5ml_screwcap:
   category:
@@ -164,7 +151,6 @@ opentrons_24_tuberack_nest_1point5ml_screwcap:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 opentrons_24_tuberack_nest_1point5ml_snapcap:
   category:
@@ -176,7 +162,6 @@ opentrons_24_tuberack_nest_1point5ml_snapcap:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 opentrons_24_tuberack_nest_2ml_screwcap:
   category:
@@ -188,7 +173,6 @@ opentrons_24_tuberack_nest_2ml_screwcap:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 opentrons_24_tuberack_nest_2ml_snapcap:
   category:
@@ -200,7 +184,6 @@ opentrons_24_tuberack_nest_2ml_snapcap:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 opentrons_6_tuberack_falcon_50ml_conical:
   category:
@@ -212,7 +195,6 @@ opentrons_6_tuberack_falcon_50ml_conical:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 opentrons_6_tuberack_nest_50ml_conical:
   category:
@@ -224,7 +206,6 @@ opentrons_6_tuberack_nest_50ml_conical:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 opentrons_96_well_aluminum_block:
   category:
@@ -236,5 +217,4 @@ opentrons_96_well_aluminum_block:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0

unilabos/registry/resources/organic/container.yaml

@@ -29,5 +29,4 @@ container:
     side: WEST
   icon: Flask.webp
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0

unilabos/registry/resources/post_process/bottle_carriers.yaml

@@ -8,7 +8,6 @@ POST_PROCESS_Raw_1BottleCarrier:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 POST_PROCESS_Reaction_1BottleCarrier:
   category:
@@ -20,5 +19,4 @@ POST_PROCESS_Reaction_1BottleCarrier:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0

unilabos/registry/resources/post_process/deck.yaml

@@ -9,5 +9,4 @@ post_process_deck:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0

unilabos/registry/resources/prcxi/plate_adapters.yaml

@@ -9,7 +9,6 @@ PRCXI_30mm_Adapter:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 PRCXI_Adapter:
   category:
@@ -22,7 +21,6 @@ PRCXI_Adapter:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 PRCXI_Deep10_Adapter:
   category:
@@ -35,7 +33,6 @@ PRCXI_Deep10_Adapter:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 PRCXI_Deep300_Adapter:
   category:
@@ -48,7 +45,6 @@ PRCXI_Deep300_Adapter:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 PRCXI_PCR_Adapter:
   category:
@@ -61,7 +57,6 @@ PRCXI_PCR_Adapter:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 PRCXI_Reservoir_Adapter:
   category:
@@ -74,7 +69,6 @@ PRCXI_Reservoir_Adapter:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 PRCXI_Tip10_Adapter:
   category:
@@ -87,7 +81,6 @@ PRCXI_Tip10_Adapter:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 PRCXI_Tip1250_Adapter:
   category:
@@ -100,7 +93,6 @@ PRCXI_Tip1250_Adapter:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 PRCXI_Tip300_Adapter:
   category:
@@ -113,5 +105,4 @@ PRCXI_Tip300_Adapter:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0