v0.10.19

fast registry load

minor fix on skill & registry

stripe ros2 schema desc
add create-device-skill

new registry system backwards to yaml

remove not exist resource

new registry sys
exp. support with add device

add ai conventions

correct raise create resource error

ret info fix revert

ret info fix

fix prcxi check

add create_resource schema

re signal host ready event

add websocket connection timeout and improve reconnection logic

add open_timeout parameter to websocket connection
add TimeoutError and InvalidStatus exception handling
implement exponential backoff for reconnection attempts
simplify reconnection logic flow

add gzip

change pose extra to any

add isFlapY

.conda/base/recipe.yaml

@@ -3,7 +3,7 @@
 
 package:
   name: unilabos
-  version: 0.10.17
+  version: 0.10.19
 
 source:
   path: ../../unilabos
@@ -46,13 +46,15 @@ requirements:
   - jinja2
   - requests
   - uvicorn
-  - opcua # [not osx]
+  - if: not osx
+    then:
+    - opcua
   - pyserial
   - pandas
   - pymodbus
   - matplotlib
   - pylibftdi
-  - uni-lab::unilabos-env ==0.10.17
+  - uni-lab::unilabos-env ==0.10.19
 
 about:
   repository: https://github.com/deepmodeling/Uni-Lab-OS

.conda/environment/recipe.yaml

@@ -2,7 +2,7 @@
 
 package:
   name: unilabos-env
-  version: 0.10.17
+  version: 0.10.19
 
 build:
   noarch: generic

.conda/full/recipe.yaml

@@ -3,7 +3,7 @@
 
 package:
   name: unilabos-full
-  version: 0.10.17
+  version: 0.10.19
 
 build:
   noarch: generic
@@ -11,7 +11,7 @@ build:
 requirements:
   run:
   # Base unilabos package (includes unilabos-env)
-  - uni-lab::unilabos ==0.10.17
+  - uni-lab::unilabos ==0.10.19
   # Documentation tools
   - sphinx
   - sphinx_rtd_theme

.conda/scripts/post-link.bat

@@ -1,9 +0,0 @@
-@echo off
-setlocal enabledelayedexpansion
-
-REM upgrade pip
-"%PREFIX%\python.exe" -m pip install --upgrade pip
-
-REM install extra deps
-"%PREFIX%\python.exe" -m pip install paho-mqtt opentrons_shared_data
-"%PREFIX%\python.exe" -m pip install git+https://github.com/Xuwznln/pylabrobot.git

.conda/scripts/post-link.sh

@@ -1,9 +0,0 @@
-#!/usr/bin/env bash
-set -euxo pipefail
-
-# make sure pip is available
-"$PREFIX/bin/python" -m pip install --upgrade pip
-
-# install extra deps
-"$PREFIX/bin/python" -m pip install paho-mqtt opentrons_shared_data
-"$PREFIX/bin/python" -m pip install git+https://github.com/Xuwznln/pylabrobot.git

.cursor/skills/create-device-skill/SKILL.md

@@ -0,0 +1,328 @@
+---
+name: create-device-skill
+description: Create a skill for any Uni-Lab device by extracting action schemas from the device registry. Use when the user wants to create a new device skill, add device API documentation, or set up action schemas for a device.
+---
+
+# 创建设备 Skill 指南
+
+本 meta-skill 教你如何为任意 Uni-Lab-OS 设备创建完整的 API 操作技能（参考 `unilab-device-api` 的成功案例）。
+
+## 数据源
+
+- **设备注册表**: `unilabos_data/req_device_registry_upload.json`
+- **结构**: `{ "resources": [{ "id": "<device_id>", "class": { "module": "<python_module:ClassName>", "action_value_mappings": { ... } } }] }`
+- **生成时机**: `unilab` 启动并完成注册表上传后自动生成
+- **module 字段**: 格式 `unilabos.devices.xxx.yyy:ClassName`，可转为源码路径 `unilabos/devices/xxx/yyy.py`，阅读源码可了解参数含义和设备行为
+
+## 创建流程
+
+### Step 0 — 收集必备信息（缺一不可，否则询问后终止）
+
+开始前**必须**确认以下 4 项信息全部就绪。如果用户未提供任何一项，**立即询问并终止当前流程**，等用户补齐后再继续。
+
+向用户提问：「请提供你的 unilab 启动参数，我需要以下信息：」
+
+#### 必备项 ①：ak / sk（认证凭据）
+
+来源：启动命令的 `--ak` `--sk` 参数，或 config.py 中的 `ak = "..."` `sk = "..."`。
+
+获取后立即生成 AUTH token：
+
+```bash
+python ./scripts/gen_auth.py <ak> <sk>
+# 或从 config.py 提取
+python ./scripts/gen_auth.py --config <config.py>
+```
+
+认证算法：`base64(ak:sk)` → `Authorization: Lab <token>`
+
+#### 必备项 ②：--addr（目标环境）
+
+决定 API 请求发往哪个服务器。从启动命令的 `--addr` 参数获取：
+
+| `--addr` 值 | BASE URL |
+|-------------|----------|
+| `test` | `https://uni-lab.test.bohrium.com` |
+| `uat` | `https://uni-lab.uat.bohrium.com` |
+| `local` | `http://127.0.0.1:48197` |
+| 不传（默认） | `https://uni-lab.bohrium.com` |
+| 其他自定义 URL | 直接使用该 URL |
+
+#### 必备项 ③：req_device_registry_upload.json（设备注册表）
+
+数据文件由 `unilab` 启动时自动生成，需要定位它：
+
+**推断 working_dir**（即 `unilabos_data` 所在目录）：
+
+| 条件 | working_dir 取值 |
+|------|------------------|
+| 传了 `--working_dir` | `<working_dir>/unilabos_data/`（若子目录已存在则直接用） |
+| 仅传了 `--config` | `<config 文件所在目录>/unilabos_data/` |
+| 都没传 | `<当前工作目录>/unilabos_data/` |
+
+**按优先级搜索文件**：
+
+```
+<推断的 working_dir>/unilabos_data/req_device_registry_upload.json
+<推断的 working_dir>/req_device_registry_upload.json
+<workspace 根目录>/unilabos_data/req_device_registry_upload.json
+```
+
+也可以直接 Glob 搜索：`**/req_device_registry_upload.json`
+
+找到后**必须检查文件修改时间**并告知用户：「找到注册表文件 `<路径>`，生成于 `<时间>`。请确认这是最近一次启动生成的。」超过 1 天提醒用户是否需要重新启动 `unilab`。
+
+**如果文件不存在** → 告知用户先运行 `unilab` 启动命令，等日志出现 `注册表响应数据已保存` 后再执行本流程。**终止。**
+
+#### 必备项 ④：目标设备
+
+用户需要明确要为哪个设备创建 skill。可以是设备名称（如「PRCXI 移液站」）或 device_id（如 `liquid_handler.prcxi`）。
+
+如果用户不确定，运行提取脚本列出所有设备供选择：
+
+```bash
+python ./scripts/extract_device_actions.py --registry <找到的文件路径>
+```
+
+#### 完整示例
+
+用户提供：
+
+```
+--ak a1fd9d4e-xxxx-xxxx-xxxx-d9a69c09f0fd
+--sk 136ff5c6-xxxx-xxxx-xxxx-a03e301f827b
+--addr test
+--port 8003
+--disable_browser
+```
+
+从中提取：
+- ✅ ak/sk → 运行 `gen_auth.py` 得到 `AUTH="Authorization: Lab YTFmZDlk..."`
+- ✅ addr=test → `BASE=https://uni-lab.test.bohrium.com`
+- ✅ 搜索 `unilabos_data/req_device_registry_upload.json` → 找到并确认时间
+- ✅ 用户指明目标设备 → 如 `liquid_handler.prcxi`
+
+**四项全部就绪后才进入 Step 1。**
+
+### Step 1 — 列出可用设备
+
+运行提取脚本，列出所有设备及 action 数量和 Python 源码路径，让用户选择：
+
+```bash
+# 自动搜索（默认在 unilabos_data/ 和当前目录查找）
+python ./scripts/extract_device_actions.py
+
+# 指定注册表文件路径
+python ./scripts/extract_device_actions.py --registry <path/to/req_device_registry_upload.json>
+```
+
+脚本输出包含每个设备的 **Python 源码路径**（从 `class.module` 转换），可用于后续阅读源码理解参数含义。
+
+### Step 2 — 提取 Action Schema
+
+用户选择设备后，运行提取脚本：
+
+```bash
+python ./scripts/extract_device_actions.py [--registry <path>] <device_id> ./skills/<skill-name>/actions/
+```
+
+脚本会显示设备的 Python 源码路径和类名，方便阅读源码了解参数含义。
+
+每个 action 生成一个 JSON 文件，包含：
+- `type` — 作为 API 调用的 `action_type`
+- `schema` — 完整 JSON Schema（含 `properties.goal.properties` 参数定义）
+- `goal` — goal 字段映射（含占位符 `$placeholder`）
+- `goal_default` — 默认值
+
+### Step 3 — 写 action-index.md
+
+按模板为每个 action 写条目：
+
+```markdown
+### `<action_name>`
+
+<用途描述（一句话）>
+
+- **Schema**: [`actions/<filename>.json`](actions/<filename>.json)
+- **核心参数**: `param1`, `param2`（从 schema.required 获取）
+- **可选参数**: `param3`, `param4`
+- **占位符字段**: `field`（需填入物料信息，值以 `$` 开头）
+```
+
+描述规则：
+- 从 `schema.properties` 读参数列表（schema 已提升为 goal 内容）
+- 从 `schema.required` 区分核心/可选参数
+- 按功能分类（移液、枪头、外设等）
+- 标注 `placeholder_keys` 中的字段类型：
+  - `unilabos_resources` → **ResourceSlot**，填入 `{id, name, uuid}`（id 是路径格式，从资源树取物料节点）
+  - `unilabos_devices` → **DeviceSlot**，填入路径字符串如 `"/host_node"`（从资源树筛选 type=device）
+  - `unilabos_nodes` → **NodeSlot**，填入路径字符串如 `"/PRCXI/PRCXI_Deck"`（资源树中任意节点）
+  - `unilabos_class` → **ClassSlot**，填入类名字符串如 `"container"`（从注册表查找）
+- array 类型字段 → `[{id, name, uuid}, ...]`
+- 特殊：`create_resource` 的 `res_id`（ResourceSlot）可填不存在的路径
+
+### Step 4 — 写 SKILL.md
+
+直接复用 `unilab-device-api` 的 API 模板（10 个 endpoint），修改：
+- 设备名称
+- Action 数量
+- 目录列表
+- Session state 中的 `device_name`
+- **AUTH 头** — 使用 Step 0 中 `gen_auth.py` 生成的 `Authorization: Lab <token>`（不要硬编码 `Api` 类型的 key）
+- **Python 源码路径** — 在 SKILL.md 开头注明设备对应的源码文件，方便参考参数含义
+- **Slot 字段表** — 列出本设备哪些 action 的哪些字段需要填入 Slot（物料/设备/节点/类名）
+
+API 模板结构：
+
+```markdown
+## 设备信息
+- device_id, Python 源码路径, 设备类名
+
+## 前置条件（缺一不可）
+- ak/sk → AUTH, --addr → BASE URL
+
+## Session State
+- lab_uuid（通过 API #1 自动匹配，不要问用户）, device_name
+
+## API Endpoints (10 个)
+# 注意：
+# - #1 获取 lab 列表 + 自动匹配 lab_uuid（遍历 is_admin 的 lab，
+#   调用 /lab/info/{uuid} 比对 access_key == ak）
+# - #2 创建工作流用 POST /lab/workflow
+# - #10 获取资源树路径含 lab_uuid: /lab/material/download/{lab_uuid}
+
+## Placeholder Slot 填写规则
+- unilabos_resources → ResourceSlot → {"id":"/path/name","name":"name","uuid":"xxx"}
+- unilabos_devices → DeviceSlot → "/parent/device" 路径字符串
+- unilabos_nodes → NodeSlot → "/parent/node" 路径字符串
+- unilabos_class → ClassSlot → "class_name" 字符串
+- 特例：create_resource 的 res_id 允许填不存在的路径
+- 列出本设备所有 Slot 字段、类型及含义
+
+## 渐进加载策略
+## 完整工作流 Checklist
+```
+
+### Step 5 — 验证
+
+检查文件完整性：
+- [ ] `SKILL.md` 包含 10 个 API endpoint
+- [ ] `SKILL.md` 包含 Placeholder Slot 填写规则（ResourceSlot / DeviceSlot / NodeSlot / ClassSlot + create_resource 特例）和本设备的 Slot 字段表
+- [ ] `action-index.md` 列出所有 action 并有描述
+- [ ] `actions/` 目录中每个 action 有对应 JSON 文件
+- [ ] JSON 文件包含 `type`, `schema`（已提升为 goal 内容）, `goal`, `goal_default`, `placeholder_keys` 字段
+- [ ] 描述能让 agent 判断该用哪个 action
+
+## Action JSON 文件结构
+
+```json
+{
+  "type": "LiquidHandlerTransfer",    // → API 的 action_type
+  "goal": {                           // goal 字段映射
+    "sources": "sources",
+    "targets": "targets",
+    "tip_racks": "tip_racks",
+    "asp_vols": "asp_vols"
+  },
+  "schema": {                         // ← 直接是 goal 的 schema（已提升）
+    "type": "object",
+    "properties": {                   // 参数定义（即请求中 goal 的字段）
+      "sources": { "type": "array", "items": { "type": "object" } },
+      "targets": { "type": "array", "items": { "type": "object" } },
+      "asp_vols": { "type": "array", "items": { "type": "number" } }
+    },
+    "required": [...],
+    "_unilabos_placeholder_info": {   // ← Slot 类型标记
+      "sources": "unilabos_resources",
+      "targets": "unilabos_resources",
+      "tip_racks": "unilabos_resources"
+    }
+  },
+  "goal_default": { ... },            // 默认值
+  "placeholder_keys": {               // ← 汇总所有 Slot 字段
+    "sources": "unilabos_resources",  //    ResourceSlot
+    "targets": "unilabos_resources",
+    "tip_racks": "unilabos_resources",
+    "target_device_id": "unilabos_devices"  // DeviceSlot
+  }
+}
+```
+
+> **注意**：`schema` 已由脚本从原始 `schema.properties.goal` 提升为顶层，直接包含参数定义。
+> `schema.properties` 中的字段即为 API 请求 `param.goal` 中的字段。
+
+## Placeholder Slot 类型体系
+
+`placeholder_keys` / `_unilabos_placeholder_info` 中有 4 种值，对应不同的填写方式：
+
+| placeholder 值 | Slot 类型 | 填写格式 | 选取范围 |
+|---------------|-----------|---------|---------|
+| `unilabos_resources` | ResourceSlot | `{"id": "/path/name", "name": "name", "uuid": "xxx"}` | 仅**物料**节点（不含设备） |
+| `unilabos_devices` | DeviceSlot | `"/parent/device_name"` | 仅**设备**节点（type=device），路径字符串 |
+| `unilabos_nodes` | NodeSlot | `"/parent/node_name"` | **设备 + 物料**，即所有节点，路径字符串 |
+| `unilabos_class` | ClassSlot | `"class_name"` | 注册表中已上报的资源类 name |
+
+### ResourceSlot（`unilabos_resources`）
+
+最常见的类型。从资源树中选取**物料**节点（孔板、枪头盒、试剂槽等）：
+
+```json
+{"id": "/workstation/container1", "name": "container1", "uuid": "ff149a9a-2cb8-419d-8db5-d3ba056fb3c2"}
+```
+
+- 单个（schema type=object）：`{"id": "/path/name", "name": "name", "uuid": "xxx"}`
+- 数组（schema type=array）：`[{"id": "/path/a", "name": "a", "uuid": "xxx"}, ...]`
+- `id` 本身是从 parent 计算的路径格式
+- 根据 action 语义选择正确的物料（如 `sources` = 液体来源，`targets` = 目标位置）
+
+> **特例**：`create_resource` 的 `res_id` 字段，目标物料可能**尚不存在**，此时直接填写期望的路径（如 `"/workstation/container1"`），不需要 uuid。
+
+### DeviceSlot（`unilabos_devices`）
+
+填写**设备路径字符串**。从资源树中筛选 type=device 的节点，从 parent 计算路径：
+
+```
+"/host_node"
+"/bioyond_cell/reaction_station"
+```
+
+- 只填路径字符串，不需要 `{id, uuid}` 对象
+- 根据 action 语义选择正确的设备（如 `target_device_id` = 目标设备）
+
+### NodeSlot（`unilabos_nodes`）
+
+范围 = 设备 + 物料。即资源树中**所有节点**都可以选，填写**路径字符串**：
+
+```
+"/PRCXI/PRCXI_Deck"
+```
+
+- 使用场景：当参数既可能指向物料也可能指向设备时（如 `PumpTransferProtocol` 的 `from_vessel`/`to_vessel`，`create_resource` 的 `parent`）
+
+### ClassSlot（`unilabos_class`）
+
+填写注册表中已上报的**资源类 name**。从本地 `req_resource_registry_upload.json` 中查找：
+
+```
+"container"
+```
+
+### 通过 API #10 获取资源树
+
+```bash
+curl -s -X GET "$BASE/api/v1/lab/material/download/$lab_uuid" -H "$AUTH"
+```
+
+注意 `lab_uuid` 在路径中（不是查询参数）。资源树返回所有节点，每个节点包含 `id`（路径格式）、`name`、`uuid`、`type`、`parent` 等字段。填写 Slot 时需根据 placeholder 类型筛选正确的节点。
+
+## 最终目录结构
+
+```
+./<skill-name>/
+├── SKILL.md              # API 端点 + 渐进加载指引
+├── action-index.md       # 动作索引：描述/用途/核心参数
+└── actions/              # 每个 action 的完整 JSON Schema
+    ├── action1.json
+    ├── action2.json
+    └── ...
+```

.cursor/skills/create-device-skill/scripts/extract_device_actions.py

@@ -0,0 +1,200 @@
+#!/usr/bin/env python3
+"""
+从 req_device_registry_upload.json 中提取指定设备的 action schema。
+
+用法:
+  # 列出所有设备及 action 数量（自动搜索注册表文件）
+  python extract_device_actions.py
+
+  # 指定注册表文件路径
+  python extract_device_actions.py --registry <path/to/req_device_registry_upload.json>
+
+  # 提取指定设备的 action 到目录
+  python extract_device_actions.py <device_id> <output_dir>
+  python extract_device_actions.py --registry <path> <device_id> <output_dir>
+
+示例:
+  python extract_device_actions.py --registry unilabos_data/req_device_registry_upload.json
+  python extract_device_actions.py liquid_handler.prcxi .cursor/skills/unilab-device-api/actions/
+"""
+import json
+import os
+import sys
+from datetime import datetime
+
+REGISTRY_FILENAME = "req_device_registry_upload.json"
+
+def find_registry(explicit_path=None):
+    """
+    查找 req_device_registry_upload.json 文件。
+
+    搜索优先级：
+    1. 用户通过 --registry 显式指定的路径
+    2. <cwd>/unilabos_data/req_device_registry_upload.json
+    3. <cwd>/req_device_registry_upload.json
+    4. <script所在目录>/../../.. (workspace根) 下的 unilabos_data/
+    5. 向上逐级搜索父目录（最多 5 层）
+    """
+    if explicit_path:
+        if os.path.isfile(explicit_path):
+            return explicit_path
+        if os.path.isdir(explicit_path):
+            fp = os.path.join(explicit_path, REGISTRY_FILENAME)
+            if os.path.isfile(fp):
+                return fp
+        print(f"警告: 指定的路径不存在: {explicit_path}")
+        return None
+
+    candidates = [
+        os.path.join("unilabos_data", REGISTRY_FILENAME),
+        REGISTRY_FILENAME,
+    ]
+
+    for c in candidates:
+        if os.path.isfile(c):
+            return c
+
+    script_dir = os.path.dirname(os.path.abspath(__file__))
+    workspace_root = os.path.normpath(os.path.join(script_dir, "..", "..", ".."))
+    for c in candidates:
+        path = os.path.join(workspace_root, c)
+        if os.path.isfile(path):
+            return path
+
+    cwd = os.getcwd()
+    for _ in range(5):
+        parent = os.path.dirname(cwd)
+        if parent == cwd:
+            break
+        cwd = parent
+        for c in candidates:
+            path = os.path.join(cwd, c)
+            if os.path.isfile(path):
+                return path
+
+    return None
+
+def load_registry(path):
+    with open(path, 'r', encoding='utf-8') as f:
+        return json.load(f)
+
+def list_devices(data):
+    """列出所有包含 action_value_mappings 的设备，同时返回 module 路径"""
+    resources = data.get('resources', [])
+    devices = []
+    for res in resources:
+        rid = res.get('id', '')
+        cls = res.get('class', {})
+        avm = cls.get('action_value_mappings', {})
+        module = cls.get('module', '')
+        if avm:
+            devices.append((rid, len(avm), module))
+    return devices
+
+def flatten_schema_to_goal(action_data):
+    """将 schema 中嵌套的 goal 内容提升为顶层 schema，去掉 feedback/result 包装"""
+    schema = action_data.get('schema', {})
+    goal_schema = schema.get('properties', {}).get('goal', {})
+    if goal_schema:
+        action_data = dict(action_data)
+        action_data['schema'] = goal_schema
+    return action_data
+
+
+def extract_actions(data, device_id, output_dir):
+    """提取指定设备的 action schema 到独立 JSON 文件"""
+    resources = data.get('resources', [])
+    for res in resources:
+        if res.get('id') == device_id:
+            cls = res.get('class', {})
+            module = cls.get('module', '')
+            avm = cls.get('action_value_mappings', {})
+            if not avm:
+                print(f"设备 {device_id} 没有 action_value_mappings")
+                return []
+
+            if module:
+                py_path = module.split(":")[0].replace(".", "/") + ".py"
+                class_name = module.split(":")[-1] if ":" in module else ""
+                print(f"Python 源码: {py_path}")
+                if class_name:
+                    print(f"设备类: {class_name}")
+
+            os.makedirs(output_dir, exist_ok=True)
+            written = []
+            for action_name in sorted(avm.keys()):
+                action_data = flatten_schema_to_goal(avm[action_name])
+                filename = action_name.replace('-', '_') + '.json'
+                filepath = os.path.join(output_dir, filename)
+                with open(filepath, 'w', encoding='utf-8') as f:
+                    json.dump(action_data, f, indent=2, ensure_ascii=False)
+                written.append(filename)
+                print(f"  {filepath}")
+            return written
+
+    print(f"设备 {device_id} 未找到")
+    return []
+
+def main():
+    args = sys.argv[1:]
+    explicit_registry = None
+
+    if "--registry" in args:
+        idx = args.index("--registry")
+        if idx + 1 < len(args):
+            explicit_registry = args[idx + 1]
+            args = args[:idx] + args[idx + 2:]
+        else:
+            print("错误: --registry 需要指定路径")
+            sys.exit(1)
+
+    registry_path = find_registry(explicit_registry)
+    if not registry_path:
+        print(f"错误: 找不到 {REGISTRY_FILENAME}")
+        print()
+        print("解决方法:")
+        print("  1. 先运行 unilab 启动命令，等待注册表生成")
+        print("  2. 用 --registry 指定文件路径:")
+        print(f"     python {sys.argv[0]} --registry <path/to/{REGISTRY_FILENAME}>")
+        print()
+        print("搜索过的路径:")
+        for p in [
+            os.path.join("unilabos_data", REGISTRY_FILENAME),
+            REGISTRY_FILENAME,
+            os.path.join("<workspace_root>", "unilabos_data", REGISTRY_FILENAME),
+        ]:
+            print(f"  - {p}")
+        sys.exit(1)
+
+    print(f"注册表: {registry_path}")
+    mtime = os.path.getmtime(registry_path)
+    gen_time = datetime.fromtimestamp(mtime).strftime("%Y-%m-%d %H:%M:%S")
+    size_mb = os.path.getsize(registry_path) / (1024 * 1024)
+    print(f"生成时间: {gen_time}  (文件大小: {size_mb:.1f} MB)")
+    data = load_registry(registry_path)
+
+    if len(args) == 0:
+        devices = list_devices(data)
+        print(f"\n找到 {len(devices)} 个设备:")
+        print(f"{'设备 ID':<50} {'Actions':>7}  {'Python 模块'}")
+        print("-" * 120)
+        for did, count, module in sorted(devices, key=lambda x: x[0]):
+            py_path = module.split(":")[0].replace(".", "/") + ".py" if module else ""
+            print(f"{did:<50} {count:>7}  {py_path}")
+
+    elif len(args) == 2:
+        device_id = args[0]
+        output_dir = args[1]
+        print(f"\n提取 {device_id} 的 actions 到 {output_dir}/")
+        written = extract_actions(data, device_id, output_dir)
+        if written:
+            print(f"\n共写入 {len(written)} 个 action 文件")
+
+    else:
+        print("用法:")
+        print("  python extract_device_actions.py [--registry <path>]                # 列出设备")
+        print("  python extract_device_actions.py [--registry <path>] <device_id> <dir>  # 提取 actions")
+        sys.exit(1)
+
+if __name__ == '__main__':
+    main()

.cursor/skills/create-device-skill/scripts/gen_auth.py

@@ -0,0 +1,69 @@
+#!/usr/bin/env python3
+"""
+从 ak/sk 生成 UniLab API Authorization header。
+
+算法: base64(ak:sk) → "Authorization: Lab <token>"
+
+用法:
+  python gen_auth.py <ak> <sk>
+  python gen_auth.py --config <config.py>
+
+示例:
+  python gen_auth.py myak mysk
+  python gen_auth.py --config experiments/config.py
+"""
+import base64
+import re
+import sys
+
+
+def gen_auth(ak: str, sk: str) -> str:
+    token = base64.b64encode(f"{ak}:{sk}".encode("utf-8")).decode("utf-8")
+    return token
+
+
+def extract_from_config(config_path: str) -> tuple:
+    """从 config.py 中提取 ak 和 sk"""
+    with open(config_path, "r", encoding="utf-8") as f:
+        content = f.read()
+    ak_match = re.search(r'''ak\s*=\s*["']([^"']+)["']''', content)
+    sk_match = re.search(r'''sk\s*=\s*["']([^"']+)["']''', content)
+    if not ak_match or not sk_match:
+        return None, None
+    return ak_match.group(1), sk_match.group(1)
+
+
+def main():
+    args = sys.argv[1:]
+
+    if len(args) == 2 and args[0] == "--config":
+        ak, sk = extract_from_config(args[1])
+        if not ak or not sk:
+            print(f"错误: 在 {args[1]} 中未找到 ak/sk 配置")
+            print("期望格式: ak = \"xxx\"  sk = \"xxx\"")
+            sys.exit(1)
+        print(f"配置文件: {args[1]}")
+    elif len(args) == 2:
+        ak, sk = args
+    else:
+        print("用法:")
+        print("  python gen_auth.py <ak> <sk>")
+        print("  python gen_auth.py --config <config.py>")
+        sys.exit(1)
+
+    token = gen_auth(ak, sk)
+    print(f"ak: {ak}")
+    print(f"sk: {sk}")
+    print()
+    print(f"Authorization header:")
+    print(f"  Authorization: Lab {token}")
+    print()
+    print(f"curl 用法:")
+    print(f'  curl -H "Authorization: Lab {token}" ...')
+    print()
+    print(f"Shell 变量:")
+    print(f'  AUTH="Authorization: Lab {token}"')
+
+
+if __name__ == "__main__":
+    main()

.cursorignore

@@ -1,26 +0,0 @@
-.conda
-# .github
-.idea
-# .vscode
-output
-pylabrobot_repo
-recipes
-scripts
-service
-temp
-# unilabos/test
-# unilabos/app/web
-unilabos/device_mesh
-unilabos_data
-unilabos_msgs
-unilabos.egg-info
-CONTRIBUTORS
-# LICENSE
-MANIFEST.in
-pyrightconfig.json
-# README.md
-# README_zh.md
-setup.py
-setup.cfg
-.gitattrubutes
-**/__pycache__

.github/dependabot.yml

@@ -0,0 +1,19 @@
+version: 2
+updates:
+# GitHub Actions
+- package-ecosystem: "github-actions"
+  directory: "/"
+  target-branch: "dev"
+  schedule:
+    interval: "weekly"
+    day: "monday"
+    time: "06:00"
+  open-pull-requests-limit: 5
+  reviewers:
+  - "msgcenterpy-team"
+  labels:
+  - "dependencies"
+  - "github-actions"
+  commit-message:
+    prefix: "ci"
+    include: "scope"

.github/workflows/ci-check.yml

@@ -49,7 +49,7 @@ jobs:
           uv pip uninstall enum34 || echo enum34 not installed, skipping
           uv pip install .
 
-      - name: Run check mode (complete_registry)
+      - name: Run check mode (AST registry validation)
         run: |
           call conda activate check-env
           echo Running check mode...

.gitignore

@@ -4,6 +4,8 @@ temp/
 output/
 unilabos_data/
 pyrightconfig.json
+.cursorignore
+device_package*/
 ## Python
 
 # Byte-compiled / optimized / DLL files

AGENTS.md

@@ -0,0 +1,87 @@
+# AGENTS.md
+
+This file provides guidance to Claude Code (claude.ai/code) when working with code in this repository.
+
+Also follow the monorepo-level rules in `../AGENTS.md`.
+
+## Build & Development
+
+```bash
+# Install in editable mode (requires mamba env with python 3.11)
+pip install -e .
+uv pip install -r unilabos/utils/requirements.txt
+
+# Run with a device graph
+unilab --graph <graph.json> --config <config.py> --backend ros
+unilab --graph <graph.json> --config <config.py> --backend simple  # no ROS2 needed
+
+# Common CLI flags
+unilab --app_bridges websocket fastapi    # communication bridges
+unilab --test_mode                        # simulate hardware, no real execution
+unilab --check_mode                       # CI validation of registry imports
+unilab --skip_env_check                   # skip auto-install of dependencies
+unilab --visual rviz|web|disable          # visualization mode
+unilab --is_slave                         # run as slave node
+
+# Workflow upload subcommand
+unilab workflow_upload -f <workflow.json> -n <name> --tags tag1 tag2
+
+# Tests
+pytest tests/                              # all tests
+pytest tests/resources/test_resourcetreeset.py  # single test file
+pytest tests/resources/test_resourcetreeset.py::TestClassName::test_method  # single test
+```
+
+## Architecture
+
+### Startup Flow
+
+`unilab` CLI → `unilabos/app/main.py:main()` → loads config → builds registry → reads device graph (JSON/GraphML) → starts backend thread (ROS2/simple) → starts FastAPI web server + WebSocket client.
+
+### Core Layers
+
+**Registry** (`unilabos/registry/`): Singleton `Registry` class discovers and catalogs all device types, resource types, and communication devices from YAML definitions. Device types live in `registry/devices/*.yaml`, resources in `registry/resources/`, comms in `registry/device_comms/`. The registry resolves class paths to actual Python classes via `utils/import_manager.py`.
+
+**Resource Tracking** (`unilabos/resources/resource_tracker.py`): Pydantic-based `ResourceDict` → `ResourceDictInstance` → `ResourceTreeSet` hierarchy. `ResourceTreeSet` is the canonical in-memory representation of all devices and resources, used throughout the system. Graph I/O is in `resources/graphio.py` (reads JSON/GraphML device topology files into `nx.Graph` + `ResourceTreeSet`).
+
+**Device Drivers** (`unilabos/devices/`): 30+ hardware drivers organized by device type (liquid_handling, hplc, balance, arm, etc.). Each driver is a Python class that gets wrapped by `ros/device_node_wrapper.py:ros2_device_node()` to become a ROS2 node with publishers, subscribers, and action servers.
+
+**ROS2 Layer** (`unilabos/ros/`): `device_node_wrapper.py` dynamically wraps any device class into `ROS2DeviceNode` (defined in `ros/nodes/base_device_node.py`). Preset node types in `ros/nodes/presets/` include `host_node`, `controller_node`, `workstation`, `serial_node`, `camera`. Messages use custom `unilabos_msgs` (pre-built, distributed via releases).
+
+**Protocol Compilation** (`unilabos/compile/`): 20+ protocol compilers (add, centrifuge, dissolve, filter, heatchill, stir, pump, etc.) that transform YAML protocol definitions into executable sequences.
+
+**Communication** (`unilabos/device_comms/`): Hardware communication adapters — OPC-UA client, Modbus PLC, RPC, and a universal driver. `app/communication.py` provides a factory pattern for WebSocket client connections to the cloud.
+
+**Web/API** (`unilabos/app/web/`): FastAPI server with REST API (`api.py`), Jinja2 template pages (`pages.py`), and HTTP client for cloud communication (`client.py`). Runs on port 8002 by default.
+
+### Configuration System
+
+- **Config classes** in `unilabos/config/config.py`: `BasicConfig`, `WSConfig`, `HTTPConfig`, `ROSConfig` — all class-level attributes, loaded from Python config files
+- Config files are `.py` files with matching class names (see `config/example_config.py`)
+- Environment variables override with prefix `UNILABOS_` (e.g., `UNILABOS_BASICCONFIG_PORT=9000`)
+- Device topology defined in graph files (JSON with node-link format, or GraphML)
+
+### Key Data Flow
+
+1. Graph file → `graphio.read_node_link_json()` → `(nx.Graph, ResourceTreeSet, resource_links)`
+2. `ResourceTreeSet` + `Registry` → `initialize_device.initialize_device_from_dict()` → `ROS2DeviceNode` instances
+3. Device nodes communicate via ROS2 topics/actions or direct Python calls (simple backend)
+4. Cloud sync via WebSocket (`app/ws_client.py`) and HTTP (`app/web/client.py`)
+
+### Test Data
+
+Example device graphs and experiment configs are in `unilabos/test/experiments/` (not `tests/`). Registry test fixtures in `unilabos/test/registry/`.
+
+## Code Conventions
+
+- Code comments and log messages in simplified Chinese
+- Python 3.11+, type hints expected
+- Pydantic models for data validation (`resource_tracker.py`)
+- Singleton pattern via `@singleton` decorator (`utils/decorator.py`)
+- Dynamic class loading via `utils/import_manager.py` — device classes resolved at runtime from registry YAML paths
+- CLI argument dashes auto-converted to underscores for consistency
+
+## Licensing
+
+- Framework code: GPL-3.0
+- Device drivers (`unilabos/devices/`): DP Technology Proprietary License — do not redistribute

CLAUDE.md

@@ -0,0 +1,4 @@
+
+Please follow the rules defined in:
+
+@AGENTS.md

docs/developer_guide/add_device.md

@@ -15,6 +15,9 @@ Python 类设备驱动在完成注册表后可以直接在 Uni-Lab 中使用，
 **示例：**
 
 ```python
+from unilabos.registry.decorators import device, topic_config
+
+@device(id="mock_gripper", category=["gripper"], description="Mock Gripper")
 class MockGripper:
     def __init__(self):
         self._position: float = 0.0
@@ -23,19 +26,23 @@ class MockGripper:
         self._status = "Idle"
 
     @property
+    @topic_config()  # 添加 @topic_config 才会定时广播
     def position(self) -> float:
         return self._position
 
     @property
+    @topic_config()
     def velocity(self) -> float:
         return self._velocity
 
     @property
+    @topic_config()
     def torque(self) -> float:
         return self._torque
 
-    # 会被自动识别的设备属性，接入 Uni-Lab 时会定时对外广播
+    # 使用 @topic_config 装饰的属性，接入 Uni-Lab 时会定时对外广播
     @property
+    @topic_config(period=2.0)  # 可自定义发布周期
     def status(self) -> str:
         return self._status
 
@@ -149,7 +156,7 @@ my_device: # 设备唯一标识符
 
 系统会自动分析您的 Python 驱动类并生成：
 
-- `status_types`：从 `@property` 装饰的方法自动识别状态属性
+- `status_types`：从 `@topic_config` 装饰的 `@property` 或方法自动识别状态属性
 - `action_value_mappings`：从类方法自动生成动作映射
 - `init_param_schema`：从 `__init__` 方法分析初始化参数
 - `schema`：前端显示用的属性类型定义
@@ -179,7 +186,9 @@ Uni-Lab 设备驱动是一个 Python 类，需要遵循以下结构：
 
 ```python
 from typing import Dict, Any
+from unilabos.registry.decorators import device, topic_config
 
+@device(id="my_device", category=["general"], description="My Device")
 class MyDevice:
     """设备类文档字符串
 
@@ -198,8 +207,9 @@ class MyDevice:
         # 初始化硬件连接
 
     @property
+    @topic_config()  # 必须添加 @topic_config 才会广播
     def status(self) -> str:
-        """设备状态（会自动广播）"""
+        """设备状态（通过 @topic_config 广播）"""
         return self._status
 
     def my_action(self, param: float) -> Dict[str, Any]:
@@ -217,34 +227,61 @@ class MyDevice:
 
 ## 状态属性 vs 动作方法
 
-### 状态属性（@property）
+### 状态属性（@property + @topic_config）
 
-状态属性会被自动识别并定期广播：
+状态属性需要同时使用 `@property` 和 `@topic_config` 装饰器才会被识别并定期广播：
 
 ```python
+from unilabos.registry.decorators import topic_config
+
 @property
+@topic_config()  # 必须添加，否则不会广播
 def temperature(self) -> float:
     """当前温度"""
     return self._read_temperature()
 
 @property
+@topic_config(period=2.0)  # 可自定义发布周期（秒）
 def status(self) -> str:
     """设备状态: idle, running, error"""
     return self._status
 
 @property
+@topic_config(name="ready")  # 可自定义发布名称
 def is_ready(self) -> bool:
     """设备是否就绪"""
     return self._status == "idle"
 ```
 
+也可以使用普通方法（非 @property）配合 `@topic_config`：
+
+```python
+@topic_config(period=10.0)
+def get_sensor_data(self) -> Dict[str, float]:
+    """获取传感器数据（get_ 前缀会自动去除，发布名为 sensor_data）"""
+    return {"temp": self._temp, "humidity": self._humidity}
+```
+
+**`@topic_config` 参数**:
+
+| 参数 | 类型 | 默认值 | 说明 |
+|------|------|--------|------|
+| `period` | float | 5.0 | 发布周期（秒） |
+| `print_publish` | bool | 节点默认 | 是否打印发布日志 |
+| `qos` | int | 10 | QoS 深度 |
+| `name` | str | None | 自定义发布名称 |
+
+**发布名称优先级**：`@topic_config(name=...)` > `get_` 前缀去除 > 方法名
+
 **特点**:
 
-- 使用`@property`装饰器
+- 必须使用 `@topic_config` 装饰器
-- 只读，不能有参数
+- 支持 `@property` 和普通方法
-- 自动添加到注册表的`status_types`
+- 添加到注册表的 `status_types`
 - 定期发布到 ROS2 topic
 
+> **⚠️ 重要：** 仅有 `@property` 装饰器而没有 `@topic_config` 的属性**不会**被广播。这是一个 Breaking Change。
+
 ### 动作方法
 
 动作方法是设备可以执行的操作：
@@ -497,6 +534,7 @@ class LiquidHandler:
         self._status = "idle"
 
     @property
+    @topic_config()
     def status(self) -> str:
         return self._status
 
@@ -886,7 +924,52 @@ class MyDevice:
 
 ## 最佳实践
 
-### 1. 类型注解
+### 1. 使用 `@device` 装饰器标识设备类
+
+```python
+from unilabos.registry.decorators import device
+
+@device(id="my_device", category=["heating"], description="My Heating Device", icon="heater.webp")
+class MyDevice:
+    ...
+```
+
+- `id`：设备唯一标识符，用于注册表匹配
+- `category`：分类列表，前端用于分组显示
+- `description`：设备描述
+- `icon`：图标文件名（可选）
+
+### 2. 使用 `@topic_config` 声明需要广播的状态
+
+```python
+from unilabos.registry.decorators import topic_config
+
+# ✓ @property + @topic_config → 会广播
+@property
+@topic_config(period=2.0)
+def temperature(self) -> float:
+    return self._temp
+
+# ✓ 普通方法 + @topic_config → 会广播（get_ 前缀自动去除）
+@topic_config(period=10.0)
+def get_sensor_data(self) -> Dict[str, float]:
+    return {"temp": self._temp}
+
+# ✓ 使用 name 参数自定义发布名称
+@property
+@topic_config(name="ready")
+def is_ready(self) -> bool:
+    return self._status == "idle"
+
+# ✗ 仅有 @property，没有 @topic_config → 不会广播
+@property
+def internal_state(self) -> str:
+    return self._state
+```
+
+> **注意：** 与 `@property` 连用时，`@topic_config` 必须放在 `@property` 下面。
+
+### 3. 类型注解
 
 ```python
 from typing import Dict, Any, Optional, List
@@ -901,7 +984,7 @@ def method(
     pass
 ```
 
-### 2. 文档字符串
+### 4. 文档字符串
 
 ```python
 def method(self, param: float) -> Dict[str, Any]:
@@ -923,7 +1006,7 @@ def method(self, param: float) -> Dict[str, Any]:
     pass
 ```
 
-### 3. 配置验证
+### 5. 配置验证
 
 ```python
 def __init__(self, config: Dict[str, Any]):
@@ -937,7 +1020,7 @@ def __init__(self, config: Dict[str, Any]):
     self.baudrate = config['baudrate']
 ```
 
-### 4. 资源清理
+### 6. 资源清理
 
 ```python
 def __del__(self):
@@ -946,7 +1029,7 @@ def __del__(self):
         self.connection.close()
 ```
 
-### 5. 设计前端友好的返回值
+### 7. 设计前端友好的返回值
 
 **记住：返回值会直接显示在 Web 界面**
 

docs/developer_guide/add_registry.md

@@ -422,18 +422,20 @@ placeholder_keys:
 
 ### status_types
 
-系统会扫描你的 Python 类，从状态方法（property 或 get\_方法）自动生成这部分：
+系统会扫描你的 Python 类，从带有 `@topic_config` 装饰器的 `@property` 或方法自动生成这部分：
 
 ```yaml
 status_types:
-  current_temperature: float # 从 get_current_temperature() 或 @property current_temperature
+  current_temperature: float # 从 @topic_config 装饰的 @property 或方法
-  is_heating: bool # 从 get_is_heating() 或 @property is_heating
+  is_heating: bool
-  status: str # 从 get_status() 或 @property status
+  status: str
 ```
 
 **注意事项**：
 
-- 系统会查找所有 `get_` 开头的方法和 `@property` 装饰的属性
+- 仅有带 `@topic_config` 装饰器的 `@property` 或方法才会被识别为状态属性
+- 没有 `@topic_config` 的 `@property` 不会生成 status_types，也不会广播
+- `get_` 前缀的方法名会自动去除前缀（如 `get_temperature` → `temperature`）
 - 类型会自动转成相应的类型（如 `str`、`float`、`bool`）
 - 如果类型是 `Any`、`None` 或未知的，默认使用 `String`
 
@@ -537,11 +539,13 @@ class AdvancedLiquidHandler:
         self._temperature = 25.0
 
     @property
+    @topic_config()
     def status(self) -> str:
         """设备状态"""
         return self._status
 
     @property
+    @topic_config()
     def temperature(self) -> float:
         """当前温度"""
         return self._temperature
@@ -809,21 +813,23 @@ my_temperature_controller:
 你的设备类需要符合以下要求：
 
 ```python
-from unilabos.common.device_base import DeviceBase
+from unilabos.registry.decorators import device, topic_config
 
-class MyDevice(DeviceBase):
+@device(id="my_device", category=["temperature"], description="My Device")
+class MyDevice:
     def __init__(self, config):
         """初始化，参数会自动分析到 init_param_schema.config"""
-        super().__init__(config)
         self.port = config.get('port', '/dev/ttyUSB0')
 
-    # 状态方法（会自动生成到 status_types）
+    # 状态方法（必须添加 @topic_config 才会生成到 status_types 并广播）
     @property
+    @topic_config()
     def status(self):
         """返回设备状态"""
         return "idle"
 
     @property
+    @topic_config()
     def temperature(self):
         """返回当前温度"""
         return 25.0
@@ -1039,7 +1045,34 @@ resource.type      # "resource"
 
 ### 代码规范
 
-1. **始终使用类型注解**
+1. **使用 `@device` 装饰器标识设备类**
+
+```python
+from unilabos.registry.decorators import device
+
+@device(id="my_device", category=["heating"], description="My Device")
+class MyDevice:
+    ...
+```
+
+2. **使用 `@topic_config` 声明广播属性**
+
+```python
+from unilabos.registry.decorators import topic_config
+
+# ✓ 需要广播的状态属性
+@property
+@topic_config(period=2.0)
+def temperature(self) -> float:
+    return self._temp
+
+# ✗ 仅有 @property 不会广播
+@property
+def internal_counter(self) -> int:
+    return self._counter
+```
+
+3. **始终使用类型注解**
 
 ```python
 # ✓ 好
@@ -1051,7 +1084,7 @@ def method(self, resource, device):
     pass
 ```
 
-2. **提供有意义的参数名**
+4. **提供有意义的参数名**
 
 ```python
 # ✓ 好 - 清晰的参数名
@@ -1063,7 +1096,7 @@ def transfer(self, r1: ResourceSlot, r2: ResourceSlot):
     pass
 ```
 
-3. **使用 Optional 表示可选参数**
+5. **使用 Optional 表示可选参数**
 
 ```python
 from typing import Optional
@@ -1076,7 +1109,7 @@ def method(
     pass
 ```
 
-4. **添加详细的文档字符串**
+6. **添加详细的文档字符串**
 
 ```python
 def method(
@@ -1096,13 +1129,13 @@ def method(
     pass
 ```
 
-5. **方法命名规范**
+7. **方法命名规范**
 
-   - 状态方法使用 `@property` 装饰器或 `get_` 前缀
+   - 状态方法使用 `@property` + `@topic_config` 装饰器，或普通方法 + `@topic_config`
    - 动作方法使用动词开头
    - 保持命名清晰、一致
 
-6. **完善的错误处理**
+8. **完善的错误处理**
    - 实现完善的错误处理
    - 添加日志记录
    - 提供有意义的错误信息

docs/developer_guide/networking_overview.md

@@ -221,10 +221,10 @@ Laboratory A    Laboratory B
 
 ```bash
 # 实验室A
-unilab --ak your_ak --sk your_sk --upload_registry --use_remote_resource
+unilab --ak your_ak --sk your_sk --upload_registry
 
 # 实验室B
-unilab --ak your_ak --sk your_sk --upload_registry --use_remote_resource
+unilab --ak your_ak --sk your_sk --upload_registry
 ```
 
 ---

docs/user_guide/best_practice.md

@@ -452,8 +452,9 @@ unilab --ak your_ak --sk your_sk -g test/experiments/mock_devices/mock_all.json
 **操作步骤：**
 
 1. 将两个 `container` 拖拽到 `workstation` 中
-2. 将 `virtual_transfer_pump` 拖拽到 `workstation` 中
+2. 将 `virtual_multiway_valve` 拖拽到 `workstation` 中
-3. 在画布上连接它们（建立父子关系）
+3. 将 `virtual_transfer_pump` 拖拽到 `workstation` 中
+4. 在画布上连接它们（建立父子关系）
 
 ![设备连接](image/links.png)
 

docs/user_guide/launch.md

@@ -22,7 +22,6 @@ options:
   --is_slave            Run the backend as slave node (without host privileges).
   --slave_no_host       Skip waiting for host service in slave mode
   --upload_registry     Upload registry information when starting unilab
-  --use_remote_resource Use remote resources when starting unilab
   --config CONFIG       Configuration file path, supports .py format Python config files
   --port PORT           Port for web service information page
   --disable_browser     Disable opening information page on startup
@@ -85,7 +84,7 @@ Uni-Lab 的启动过程分为以下几个阶段：
 支持两种方式：
 
 - **本地文件**：使用 `-g` 指定图谱文件（支持 JSON 和 GraphML 格式）
-- **远程资源**：使用 `--use_remote_resource` 从云端获取
+- **远程资源**：不指定本地文件即可
 
 ### 7. 注册表构建
 
@@ -196,7 +195,7 @@ unilab --config path/to/your/config.py
 unilab --ak your_ak --sk your_sk -g path/to/graph.json --upload_registry
 
 # 使用远程资源启动
-unilab --ak your_ak --sk your_sk --use_remote_resource
+unilab --ak your_ak --sk your_sk
 
 # 更新注册表
 unilab --ak your_ak --sk your_sk --complete_registry

recipes/msgs/recipe.yaml

@@ -1,6 +1,6 @@
 package:
   name: ros-humble-unilabos-msgs
-  version: 0.10.17
+  version: 0.10.19
 source:
   path: ../../unilabos_msgs
   target_directory: src

recipes/unilabos/recipe.yaml

@@ -1,6 +1,6 @@
 package:
   name: unilabos
-  version: "0.10.17"
+  version: "0.10.19"
 
 source:
   path: ../..

scripts/workflow.py

@@ -2,6 +2,7 @@ import json
 import logging
 import traceback
 import uuid
+import xml.etree.ElementTree as ET
 from typing import Any, Dict, List
 
 import networkx as nx
@@ -24,15 +25,7 @@ class SimpleGraph:
 
     def add_edge(self, source, target, **attrs):
         """添加边"""
-        # edge = {"source": source, "target": target, **attrs}
+        edge = {"source": source, "target": target, **attrs}
-        edge = {
-            "source": source, "target": target,
-            "source_node_uuid": source,
-            "target_node_uuid": target,
-            "source_handle_io": "source",
-            "target_handle_io": "target",
-            **attrs
-        }
         self.edges.append(edge)
 
     def to_dict(self):
@@ -49,7 +42,6 @@ class SimpleGraph:
             "multigraph": False,
             "graph": {},
             "nodes": nodes_list,
-            "edges": self.edges,
             "links": self.edges,
         }
 
@@ -66,8 +58,495 @@ def extract_json_from_markdown(text: str) -> str:
     return text
 
 
+def convert_to_type(val: str) -> Any:
+    """将字符串值转换为适当的数据类型"""
+    if val == "True":
+        return True
+    if val == "False":
+        return False
+    if val == "?":
+        return None
+    if val.endswith(" g"):
+        return float(val.split(" ")[0])
+    if val.endswith("mg"):
+        return float(val.split("mg")[0])
+    elif val.endswith("mmol"):
+        return float(val.split("mmol")[0]) / 1000
+    elif val.endswith("mol"):
+        return float(val.split("mol")[0])
+    elif val.endswith("ml"):
+        return float(val.split("ml")[0])
+    elif val.endswith("RPM"):
+        return float(val.split("RPM")[0])
+    elif val.endswith(" °C"):
+        return float(val.split(" ")[0])
+    elif val.endswith(" %"):
+        return float(val.split(" ")[0])
+    return val
 
 
+def refactor_data(data: List[Dict[str, Any]]) -> List[Dict[str, Any]]:
+    """统一的数据重构函数，根据操作类型自动选择模板"""
+    refactored_data = []
+
+    # 定义操作映射，包含生物实验和有机化学的所有操作
+    OPERATION_MAPPING = {
+        # 生物实验操作
+        "transfer_liquid": "SynBioFactory-liquid_handler.prcxi-transfer_liquid",
+        "transfer": "SynBioFactory-liquid_handler.biomek-transfer",
+        "incubation": "SynBioFactory-liquid_handler.biomek-incubation",
+        "move_labware": "SynBioFactory-liquid_handler.biomek-move_labware",
+        "oscillation": "SynBioFactory-liquid_handler.biomek-oscillation",
+        # 有机化学操作
+        "HeatChillToTemp": "SynBioFactory-workstation-HeatChillProtocol",
+        "StopHeatChill": "SynBioFactory-workstation-HeatChillStopProtocol",
+        "StartHeatChill": "SynBioFactory-workstation-HeatChillStartProtocol",
+        "HeatChill": "SynBioFactory-workstation-HeatChillProtocol",
+        "Dissolve": "SynBioFactory-workstation-DissolveProtocol",
+        "Transfer": "SynBioFactory-workstation-TransferProtocol",
+        "Evaporate": "SynBioFactory-workstation-EvaporateProtocol",
+        "Recrystallize": "SynBioFactory-workstation-RecrystallizeProtocol",
+        "Filter": "SynBioFactory-workstation-FilterProtocol",
+        "Dry": "SynBioFactory-workstation-DryProtocol",
+        "Add": "SynBioFactory-workstation-AddProtocol",
+    }
+
+    UNSUPPORTED_OPERATIONS = ["Purge", "Wait", "Stir", "ResetHandling"]
+
+    for step in data:
+        operation = step.get("action")
+        if not operation or operation in UNSUPPORTED_OPERATIONS:
+            continue
+
+        # 处理重复操作
+        if operation == "Repeat":
+            times = step.get("times", step.get("parameters", {}).get("times", 1))
+            sub_steps = step.get("steps", step.get("parameters", {}).get("steps", []))
+            for i in range(int(times)):
+                sub_data = refactor_data(sub_steps)
+                refactored_data.extend(sub_data)
+            continue
+
+        # 获取模板名称
+        template = OPERATION_MAPPING.get(operation)
+        if not template:
+            # 自动推断模板类型
+            if operation.lower() in ["transfer", "incubation", "move_labware", "oscillation"]:
+                template = f"SynBioFactory-liquid_handler.biomek-{operation}"
+            else:
+                template = f"SynBioFactory-workstation-{operation}Protocol"
+
+        # 创建步骤数据
+        step_data = {
+            "template": template,
+            "description": step.get("description", step.get("purpose", f"{operation} operation")),
+            "lab_node_type": "Device",
+            "parameters": step.get("parameters", step.get("action_args", {})),
+        }
+        refactored_data.append(step_data)
+
+    return refactored_data
+
+
+def build_protocol_graph(
+    labware_info: List[Dict[str, Any]], protocol_steps: List[Dict[str, Any]], workstation_name: str
+) -> SimpleGraph:
+    """统一的协议图构建函数，根据设备类型自动选择构建逻辑"""
+    G = SimpleGraph()
+    resource_last_writer = {}
+    LAB_NAME = "SynBioFactory"
+
+    protocol_steps = refactor_data(protocol_steps)
+
+    # 检查协议步骤中的模板来判断协议类型
+    has_biomek_template = any(
+        ("biomek" in step.get("template", "")) or ("prcxi" in step.get("template", ""))
+        for step in protocol_steps
+    )
+
+    if has_biomek_template:
+        # 生物实验协议图构建
+        for labware_id, labware in labware_info.items():
+            node_id = str(uuid.uuid4())
+
+            labware_attrs = labware.copy()
+            labware_id = labware_attrs.pop("id", labware_attrs.get("name", f"labware_{uuid.uuid4()}"))
+            labware_attrs["description"] = labware_id
+            labware_attrs["lab_node_type"] = (
+                "Reagent" if "Plate" in str(labware_id) else "Labware" if "Rack" in str(labware_id) else "Sample"
+            )
+            labware_attrs["device_id"] = workstation_name
+
+            G.add_node(node_id, template=f"{LAB_NAME}-host_node-create_resource", **labware_attrs)
+            resource_last_writer[labware_id] = f"{node_id}:labware"
+
+        # 处理协议步骤
+        prev_node = None
+        for i, step in enumerate(protocol_steps):
+            node_id = str(uuid.uuid4())
+            G.add_node(node_id, **step)
+
+            # 添加控制流边
+            if prev_node is not None:
+                G.add_edge(prev_node, node_id, source_port="ready", target_port="ready")
+            prev_node = node_id
+
+            # 处理物料流
+            params = step.get("parameters", {})
+            if "sources" in params and params["sources"] in resource_last_writer:
+                source_node, source_port = resource_last_writer[params["sources"]].split(":")
+                G.add_edge(source_node, node_id, source_port=source_port, target_port="labware")
+
+            if "targets" in params:
+                resource_last_writer[params["targets"]] = f"{node_id}:labware"
+
+        # 添加协议结束节点
+        end_id = str(uuid.uuid4())
+        G.add_node(end_id, template=f"{LAB_NAME}-liquid_handler.biomek-run_protocol")
+        if prev_node is not None:
+            G.add_edge(prev_node, end_id, source_port="ready", target_port="ready")
+
+    else:
+        # 有机化学协议图构建
+        WORKSTATION_ID = workstation_name
+
+        # 为所有labware创建资源节点
+        for item_id, item in labware_info.items():
+            # item_id = item.get("id") or item.get("name", f"item_{uuid.uuid4()}")
+            node_id = str(uuid.uuid4())
+
+            # 判断节点类型
+            if item.get("type") == "hardware" or "reactor" in str(item_id).lower():
+                if "reactor" not in str(item_id).lower():
+                    continue
+                lab_node_type = "Sample"
+                description = f"Prepare Reactor: {item_id}"
+                liquid_type = []
+                liquid_volume = []
+            else:
+                lab_node_type = "Reagent"
+                description = f"Add Reagent to Flask: {item_id}"
+                liquid_type = [item_id]
+                liquid_volume = [1e5]
+
+            G.add_node(
+                node_id,
+                template=f"{LAB_NAME}-host_node-create_resource",
+                description=description,
+                lab_node_type=lab_node_type,
+                res_id=item_id,
+                device_id=WORKSTATION_ID,
+                class_name="container",
+                parent=WORKSTATION_ID,
+                bind_locations={"x": 0.0, "y": 0.0, "z": 0.0},
+                liquid_input_slot=[-1],
+                liquid_type=liquid_type,
+                liquid_volume=liquid_volume,
+                slot_on_deck="",
+                role=item.get("role", ""),
+            )
+            resource_last_writer[item_id] = f"{node_id}:labware"
+
+        last_control_node_id = None
+
+        # 处理协议步骤
+        for step in protocol_steps:
+            node_id = str(uuid.uuid4())
+            G.add_node(node_id, **step)
+
+            # 控制流
+            if last_control_node_id is not None:
+                G.add_edge(last_control_node_id, node_id, source_port="ready", target_port="ready")
+            last_control_node_id = node_id
+
+            # 物料流
+            params = step.get("parameters", {})
+            input_resources = {
+                "Vessel": params.get("vessel"),
+                "ToVessel": params.get("to_vessel"),
+                "FromVessel": params.get("from_vessel"),
+                "reagent": params.get("reagent"),
+                "solvent": params.get("solvent"),
+                "compound": params.get("compound"),
+                "sources": params.get("sources"),
+                "targets": params.get("targets"),
+            }
+
+            for target_port, resource_name in input_resources.items():
+                if resource_name and resource_name in resource_last_writer:
+                    source_node, source_port = resource_last_writer[resource_name].split(":")
+                    G.add_edge(source_node, node_id, source_port=source_port, target_port=target_port)
+
+            output_resources = {
+                "VesselOut": params.get("vessel"),
+                "FromVesselOut": params.get("from_vessel"),
+                "ToVesselOut": params.get("to_vessel"),
+                "FiltrateOut": params.get("filtrate_vessel"),
+                "reagent": params.get("reagent"),
+                "solvent": params.get("solvent"),
+                "compound": params.get("compound"),
+                "sources_out": params.get("sources"),
+                "targets_out": params.get("targets"),
+            }
+
+            for source_port, resource_name in output_resources.items():
+                if resource_name:
+                    resource_last_writer[resource_name] = f"{node_id}:{source_port}"
+
+    return G
+
+
+def draw_protocol_graph(protocol_graph: SimpleGraph, output_path: str):
+    """
+    (辅助功能) 使用 networkx 和 matplotlib 绘制协议工作流图，用于可视化。
+    """
+    if not protocol_graph:
+        print("Cannot draw graph: Graph object is empty.")
+        return
+
+    G = nx.DiGraph()
+
+    for node_id, attrs in protocol_graph.nodes.items():
+        label = attrs.get("description", attrs.get("template", node_id[:8]))
+        G.add_node(node_id, label=label, **attrs)
+
+    for edge in protocol_graph.edges:
+        G.add_edge(edge["source"], edge["target"])
+
+    plt.figure(figsize=(20, 15))
+    try:
+        pos = nx.nx_agraph.graphviz_layout(G, prog="dot")
+    except Exception:
+        pos = nx.shell_layout(G)  # Fallback layout
+
+    node_labels = {node: data["label"] for node, data in G.nodes(data=True)}
+    nx.draw(
+        G,
+        pos,
+        with_labels=False,
+        node_size=2500,
+        node_color="skyblue",
+        node_shape="o",
+        edge_color="gray",
+        width=1.5,
+        arrowsize=15,
+    )
+    nx.draw_networkx_labels(G, pos, labels=node_labels, font_size=8, font_weight="bold")
+
+    plt.title("Chemical Protocol Workflow Graph", size=15)
+    plt.savefig(output_path, dpi=300, bbox_inches="tight")
+    plt.close()
+    print(f"  - Visualization saved to '{output_path}'")
+
+
+from networkx.drawing.nx_agraph import to_agraph
+import re
+
+COMPASS = {"n","e","s","w","ne","nw","se","sw","c"}
+
+def _is_compass(port: str) -> bool:
+    return isinstance(port, str) and port.lower() in COMPASS
+
+def draw_protocol_graph_with_ports(protocol_graph, output_path: str, rankdir: str = "LR"):
+    """
+    使用 Graphviz 端口语法绘制协议工作流图。
+    - 若边上的 source_port/target_port 是 compass（n/e/s/w/...），直接用 compass。
+    - 否则自动为节点创建 record 形状并定义命名端口 <portname>。
+    最终由 PyGraphviz 渲染并输出到 output_path（后缀决定格式，如 .png/.svg/.pdf）。
+    """
+    if not protocol_graph:
+        print("Cannot draw graph: Graph object is empty.")
+        return
+
+    # 1) 先用 networkx 搭建有向图，保留端口属性
+    G = nx.DiGraph()
+    for node_id, attrs in protocol_graph.nodes.items():
+        label = attrs.get("description", attrs.get("template", node_id[:8]))
+        # 保留一个干净的“中心标签”，用于放在 record 的中间槽
+        G.add_node(node_id, _core_label=str(label), **{k:v for k,v in attrs.items() if k not in ("label",)})
+
+    edges_data = []
+    in_ports_by_node  = {}  # 收集命名输入端口
+    out_ports_by_node = {}  # 收集命名输出端口
+
+    for edge in protocol_graph.edges:
+        u = edge["source"]
+        v = edge["target"]
+        sp = edge.get("source_port")
+        tp = edge.get("target_port")
+
+        # 记录到图里（保留原始端口信息）
+        G.add_edge(u, v, source_port=sp, target_port=tp)
+        edges_data.append((u, v, sp, tp))
+
+        # 如果不是 compass，就按“命名端口”先归类，等会儿给节点造 record
+        if sp and not _is_compass(sp):
+            out_ports_by_node.setdefault(u, set()).add(str(sp))
+        if tp and not _is_compass(tp):
+            in_ports_by_node.setdefault(v, set()).add(str(tp))
+
+    # 2) 转为 AGraph，使用 Graphviz 渲染
+    A = to_agraph(G)
+    A.graph_attr.update(rankdir=rankdir, splines="true", concentrate="false", fontsize="10")
+    A.node_attr.update(shape="box", style="rounded,filled", fillcolor="lightyellow", color="#999999", fontname="Helvetica")
+    A.edge_attr.update(arrowsize="0.8", color="#666666")
+
+    # 3) 为需要命名端口的节点设置 record 形状与 label
+    #    左列 = 输入端口；中间 = 核心标签；右列 = 输出端口
+    for n in A.nodes():
+        node = A.get_node(n)
+        core = G.nodes[n].get("_core_label", n)
+
+        in_ports  = sorted(in_ports_by_node.get(n, []))
+        out_ports = sorted(out_ports_by_node.get(n, []))
+
+        # 如果该节点涉及命名端口，则用 record；否则保留原 box
+        if in_ports or out_ports:
+            def port_fields(ports):
+                if not ports:
+                    return " "  # 必须留一个空槽占位
+                # 每个端口一个小格子，<p> name
+                return "|".join(f"<{re.sub(r'[^A-Za-z0-9_:.|-]', '_', p)}> {p}" for p in ports)
+
+            left  = port_fields(in_ports)
+            right = port_fields(out_ports)
+
+            # 三栏：左(入) | 中(节点名) | 右(出)
+            record_label = f"{{ {left} | {core} | {right} }}"
+            node.attr.update(shape="record", label=record_label)
+        else:
+            # 没有命名端口：普通盒子，显示核心标签
+            node.attr.update(label=str(core))
+
+    # 4) 给边设置 headport / tailport
+    #    - 若端口为 compass：直接用 compass（e.g., headport="e"）
+    #    - 若端口为命名端口：使用在 record 中定义的 <port> 名（同名即可）
+    for (u, v, sp, tp) in edges_data:
+        e = A.get_edge(u, v)
+
+        # Graphviz 属性：tail 是源，head 是目标
+        if sp:
+            if _is_compass(sp):
+                e.attr["tailport"] = sp.lower()
+            else:
+                # 与 record label 中 <port> 名一致；特殊字符已在 label 中做了清洗
+                e.attr["tailport"] = re.sub(r'[^A-Za-z0-9_:.|-]', '_', str(sp))
+
+        if tp:
+            if _is_compass(tp):
+                e.attr["headport"] = tp.lower()
+            else:
+                e.attr["headport"] = re.sub(r'[^A-Za-z0-9_:.|-]', '_', str(tp))
+
+        # 可选：若想让边更贴边缘，可设置 constraint/spline 等
+        # e.attr["arrowhead"] = "vee"
+
+    # 5) 输出
+    A.draw(output_path, prog="dot")
+    print(f"  - Port-aware workflow rendered to '{output_path}'")
+
+
+def flatten_xdl_procedure(procedure_elem: ET.Element) -> List[ET.Element]:
+    """展平嵌套的XDL程序结构"""
+    flattened_operations = []
+    TEMP_UNSUPPORTED_PROTOCOL = ["Purge", "Wait", "Stir", "ResetHandling"]
+
+    def extract_operations(element: ET.Element):
+        if element.tag not in ["Prep", "Reaction", "Workup", "Purification", "Procedure"]:
+            if element.tag not in TEMP_UNSUPPORTED_PROTOCOL:
+                flattened_operations.append(element)
+
+        for child in element:
+            extract_operations(child)
+
+    for child in procedure_elem:
+        extract_operations(child)
+
+    return flattened_operations
+
+
+def parse_xdl_content(xdl_content: str) -> tuple:
+    """解析XDL内容"""
+    try:
+        xdl_content_cleaned = "".join(c for c in xdl_content if c.isprintable())
+        root = ET.fromstring(xdl_content_cleaned)
+
+        synthesis_elem = root.find("Synthesis")
+        if synthesis_elem is None:
+            return None, None, None
+
+        # 解析硬件组件
+        hardware_elem = synthesis_elem.find("Hardware")
+        hardware = []
+        if hardware_elem is not None:
+            hardware = [{"id": c.get("id"), "type": c.get("type")} for c in hardware_elem.findall("Component")]
+
+        # 解析试剂
+        reagents_elem = synthesis_elem.find("Reagents")
+        reagents = []
+        if reagents_elem is not None:
+            reagents = [{"name": r.get("name"), "role": r.get("role", "")} for r in reagents_elem.findall("Reagent")]
+
+        # 解析程序
+        procedure_elem = synthesis_elem.find("Procedure")
+        if procedure_elem is None:
+            return None, None, None
+
+        flattened_operations = flatten_xdl_procedure(procedure_elem)
+        return hardware, reagents, flattened_operations
+
+    except ET.ParseError as e:
+        raise ValueError(f"Invalid XDL format: {e}")
+
+
+def convert_xdl_to_dict(xdl_content: str) -> Dict[str, Any]:
+    """
+    将XDL XML格式转换为标准的字典格式
+
+    Args:
+        xdl_content: XDL XML内容
+
+    Returns:
+        转换结果，包含步骤和器材信息
+    """
+    try:
+        hardware, reagents, flattened_operations = parse_xdl_content(xdl_content)
+        if hardware is None:
+            return {"error": "Failed to parse XDL content", "success": False}
+
+        # 将XDL元素转换为字典格式
+        steps_data = []
+        for elem in flattened_operations:
+            # 转换参数类型
+            parameters = {}
+            for key, val in elem.attrib.items():
+                converted_val = convert_to_type(val)
+                if converted_val is not None:
+                    parameters[key] = converted_val
+
+            step_dict = {
+                "operation": elem.tag,
+                "parameters": parameters,
+                "description": elem.get("purpose", f"Operation: {elem.tag}"),
+            }
+            steps_data.append(step_dict)
+
+        # 合并硬件和试剂为统一的labware_info格式
+        labware_data = []
+        labware_data.extend({"id": hw["id"], "type": "hardware", **hw} for hw in hardware)
+        labware_data.extend({"name": reagent["name"], "type": "reagent", **reagent} for reagent in reagents)
+
+        return {
+            "success": True,
+            "steps": steps_data,
+            "labware": labware_data,
+            "message": f"Successfully converted XDL to dict format. Found {len(steps_data)} steps and {len(labware_data)} labware items.",
+        }
+
+    except Exception as e:
+        error_msg = f"XDL conversion failed: {str(e)}"
+        logger.error(error_msg)
+        return {"error": error_msg, "success": False}
 
 
 def create_workflow(

setup.py

@@ -4,7 +4,7 @@ package_name = 'unilabos'
 
 setup(
     name=package_name,
-    version='0.10.17',
+    version='0.10.19',
     packages=find_packages(),
     include_package_data=True,
     install_requires=['setuptools'],

tests/devices/liquid_handling/README.md

@@ -1,15 +0,0 @@
-# Liquid handling 集成测试
-
-`test_transfer_liquid.py` 现在会调用 PRCXI 的 RViz 仿真 backend，运行前请确保：
-
-1. 已安装包含 `pylabrobot`、`rclpy` 的运行环境；
-2. 启动 ROS 依赖（`rviz` 可选，但是 `rviz_backend` 会创建 ROS 节点）；
-3. 在 shell 中设置 `UNILAB_SIM_TEST=1`，否则 pytest 会自动跳过这些慢速用例：
-
-```bash
-export UNILAB_SIM_TEST=1
-pytest tests/devices/liquid_handling/test_transfer_liquid.py -m slow
-```
-
-如果只需验证逻辑层（不依赖仿真），可以直接运行 `tests/devices/liquid_handling/unit_test.py`，该文件使用 Fake backend，适合作为 CI 的快速测试。***
-

tests/devices/liquid_handling/unit_test.py

@@ -1,547 +0,0 @@
-import asyncio
-from dataclasses import dataclass
-from typing import Any, Iterable, List, Optional, Sequence, Tuple
-
-import pytest
-
-from unilabos.devices.liquid_handling.liquid_handler_abstract import LiquidHandlerAbstract
-
-
-@dataclass(frozen=True)
-class DummyContainer:
-    name: str
-
-    def __repr__(self) -> str:  # pragma: no cover
-        return f"DummyContainer({self.name})"
-
-
-@dataclass(frozen=True)
-class DummyTipSpot:
-    name: str
-
-    def __repr__(self) -> str:  # pragma: no cover
-        return f"DummyTipSpot({self.name})"
-
-
-def make_tip_iter(n: int = 256) -> Iterable[List[DummyTipSpot]]:
-    """Yield lists so code can safely call `tip.extend(next(self.current_tip))`."""
-    for i in range(n):
-        yield [DummyTipSpot(f"tip_{i}")]
-
-
-class FakeLiquidHandler(LiquidHandlerAbstract):
-    """不初始化真实 backend/deck；仅用来记录 transfer_liquid 内部调用序列。"""
-
-    def __init__(self, channel_num: int = 8):
-        # 不调用 super().__init__，避免真实硬件/后端依赖
-        self.channel_num = channel_num
-        self.support_touch_tip = True
-        self.current_tip = iter(make_tip_iter())
-        self.calls: List[Tuple[str, Any]] = []
-
-    async def pick_up_tips(self, tip_spots, use_channels=None, offsets=None, **backend_kwargs):
-        self.calls.append(("pick_up_tips", {"tips": list(tip_spots), "use_channels": use_channels}))
-
-    async def aspirate(
-        self,
-        resources: Sequence[Any],
-        vols: List[float],
-        use_channels: Optional[List[int]] = None,
-        flow_rates: Optional[List[Optional[float]]] = None,
-        offsets: Any = None,
-        liquid_height: Any = None,
-        blow_out_air_volume: Any = None,
-        spread: str = "wide",
-        **backend_kwargs,
-    ):
-        self.calls.append(
-            (
-                "aspirate",
-                {
-                    "resources": list(resources),
-                    "vols": list(vols),
-                    "use_channels": list(use_channels) if use_channels is not None else None,
-                    "flow_rates": list(flow_rates) if flow_rates is not None else None,
-                    "offsets": list(offsets) if offsets is not None else None,
-                    "liquid_height": list(liquid_height) if liquid_height is not None else None,
-                    "blow_out_air_volume": list(blow_out_air_volume) if blow_out_air_volume is not None else None,
-                },
-            )
-        )
-
-    async def dispense(
-        self,
-        resources: Sequence[Any],
-        vols: List[float],
-        use_channels: Optional[List[int]] = None,
-        flow_rates: Optional[List[Optional[float]]] = None,
-        offsets: Any = None,
-        liquid_height: Any = None,
-        blow_out_air_volume: Any = None,
-        spread: str = "wide",
-        **backend_kwargs,
-    ):
-        self.calls.append(
-            (
-                "dispense",
-                {
-                    "resources": list(resources),
-                    "vols": list(vols),
-                    "use_channels": list(use_channels) if use_channels is not None else None,
-                    "flow_rates": list(flow_rates) if flow_rates is not None else None,
-                    "offsets": list(offsets) if offsets is not None else None,
-                    "liquid_height": list(liquid_height) if liquid_height is not None else None,
-                    "blow_out_air_volume": list(blow_out_air_volume) if blow_out_air_volume is not None else None,
-                },
-            )
-        )
-
-    async def discard_tips(self, use_channels=None, *args, **kwargs):
-        # 有的分支是 discard_tips(use_channels=[0])，有的分支是 discard_tips([0..7])（位置参数）
-        self.calls.append(("discard_tips", {"use_channels": list(use_channels) if use_channels is not None else None}))
-
-    async def custom_delay(self, seconds=0, msg=None):
-        self.calls.append(("custom_delay", {"seconds": seconds, "msg": msg}))
-
-    async def touch_tip(self, targets):
-        # 原实现会访问 targets.get_size_x() 等；测试里只记录调用
-        self.calls.append(("touch_tip", {"targets": targets}))
-
-def run(coro):
-    return asyncio.run(coro)
-
-
-def test_one_to_one_single_channel_basic_calls():
-  lh = FakeLiquidHandler(channel_num=1)
-  lh.current_tip = iter(make_tip_iter(64))
-
-  sources = [DummyContainer(f"S{i}") for i in range(3)]
-  targets = [DummyContainer(f"T{i}") for i in range(3)]
-
-  run(
-    lh.transfer_liquid(
-      sources=sources,
-      targets=targets,
-      tip_racks=[],
-      use_channels=[0],
-      asp_vols=[1, 2, 3],
-      dis_vols=[4, 5, 6],
-      mix_times=None,  # 应该仍能执行（不 mix）
-    )
-  )
-
-  assert [c[0] for c in lh.calls].count("pick_up_tips") == 3
-  assert [c[0] for c in lh.calls].count("aspirate") == 3
-  assert [c[0] for c in lh.calls].count("dispense") == 3
-  assert [c[0] for c in lh.calls].count("discard_tips") == 3
-
-  # 每次 aspirate/dispense 都是单孔列表
-  aspirates = [payload for name, payload in lh.calls if name == "aspirate"]
-  assert aspirates[0]["resources"] == [sources[0]]
-  assert aspirates[0]["vols"] == [1.0]
-
-  dispenses = [payload for name, payload in lh.calls if name == "dispense"]
-  assert dispenses[2]["resources"] == [targets[2]]
-  assert dispenses[2]["vols"] == [6.0]
-
-
-def test_one_to_one_single_channel_before_stage_mixes_prior_to_aspirate():
-  lh = FakeLiquidHandler(channel_num=1)
-  lh.current_tip = iter(make_tip_iter(16))
-
-  source = DummyContainer("S0")
-  target = DummyContainer("T0")
-
-  run(
-    lh.transfer_liquid(
-      sources=[source],
-      targets=[target],
-      tip_racks=[],
-      use_channels=[0],
-      asp_vols=[5],
-      dis_vols=[5],
-      mix_stage="before",
-      mix_times=1,
-      mix_vol=3,
-    )
-  )
-
-  aspirate_calls = [(idx, payload) for idx, (name, payload) in enumerate(lh.calls) if name == "aspirate"]
-  assert len(aspirate_calls) >= 2
-  mix_idx, mix_payload = aspirate_calls[0]
-  assert mix_payload["resources"] == [target]
-  assert mix_payload["vols"] == [3]
-  transfer_idx, transfer_payload = aspirate_calls[1]
-  assert transfer_payload["resources"] == [source]
-  assert mix_idx < transfer_idx
-
-
-def test_one_to_one_eight_channel_groups_by_8():
-  lh = FakeLiquidHandler(channel_num=8)
-  lh.current_tip = iter(make_tip_iter(256))
-
-  sources = [DummyContainer(f"S{i}") for i in range(16)]
-  targets = [DummyContainer(f"T{i}") for i in range(16)]
-  asp_vols = list(range(1, 17))
-  dis_vols = list(range(101, 117))
-
-  run(
-    lh.transfer_liquid(
-      sources=sources,
-      targets=targets,
-      tip_racks=[],
-      use_channels=list(range(8)),
-      asp_vols=asp_vols,
-      dis_vols=dis_vols,
-      mix_times=0,  # 触发逻辑但不 mix
-    )
-  )
-
-  # 16 个任务 -> 2 组，每组 8 通道一起做
-  assert [c[0] for c in lh.calls].count("pick_up_tips") == 2
-  aspirates = [payload for name, payload in lh.calls if name == "aspirate"]
-  dispenses = [payload for name, payload in lh.calls if name == "dispense"]
-  assert len(aspirates) == 2
-  assert len(dispenses) == 2
-
-  assert aspirates[0]["resources"] == sources[0:8]
-  assert aspirates[0]["vols"] == [float(v) for v in asp_vols[0:8]]
-  assert dispenses[1]["resources"] == targets[8:16]
-  assert dispenses[1]["vols"] == [float(v) for v in dis_vols[8:16]]
-
-
-def test_one_to_one_eight_channel_requires_multiple_of_8_targets():
-  lh = FakeLiquidHandler(channel_num=8)
-  lh.current_tip = iter(make_tip_iter(64))
-
-  sources = [DummyContainer(f"S{i}") for i in range(9)]
-  targets = [DummyContainer(f"T{i}") for i in range(9)]
-
-  with pytest.raises(ValueError, match="multiple of 8"):
-    run(
-      lh.transfer_liquid(
-        sources=sources,
-        targets=targets,
-        tip_racks=[],
-        use_channels=list(range(8)),
-        asp_vols=[1] * 9,
-        dis_vols=[1] * 9,
-        mix_times=0,
-      )
-    )
-
-
-def test_one_to_one_eight_channel_parameter_lists_are_chunked_per_8():
-  lh = FakeLiquidHandler(channel_num=8)
-  lh.current_tip = iter(make_tip_iter(512))
-
-  sources = [DummyContainer(f"S{i}") for i in range(16)]
-  targets = [DummyContainer(f"T{i}") for i in range(16)]
-  asp_vols = [i + 1 for i in range(16)]
-  dis_vols = [200 + i for i in range(16)]
-  asp_flow_rates = [0.1 * (i + 1) for i in range(16)]
-  dis_flow_rates = [0.2 * (i + 1) for i in range(16)]
-  offsets = [f"offset_{i}" for i in range(16)]
-  liquid_heights = [i * 0.5 for i in range(16)]
-  blow_out_air_volume = [i + 0.05 for i in range(16)]
-
-  run(
-    lh.transfer_liquid(
-      sources=sources,
-      targets=targets,
-      tip_racks=[],
-      use_channels=list(range(8)),
-      asp_vols=asp_vols,
-      dis_vols=dis_vols,
-      asp_flow_rates=asp_flow_rates,
-      dis_flow_rates=dis_flow_rates,
-      offsets=offsets,
-      liquid_height=liquid_heights,
-      blow_out_air_volume=blow_out_air_volume,
-      mix_times=0,
-    )
-  )
-
-  aspirates = [payload for name, payload in lh.calls if name == "aspirate"]
-  dispenses = [payload for name, payload in lh.calls if name == "dispense"]
-  assert len(aspirates) == len(dispenses) == 2
-
-  for batch_idx in range(2):
-    start = batch_idx * 8
-    end = start + 8
-    asp_call = aspirates[batch_idx]
-    dis_call = dispenses[batch_idx]
-    assert asp_call["resources"] == sources[start:end]
-    assert asp_call["flow_rates"] == asp_flow_rates[start:end]
-    assert asp_call["offsets"] == offsets[start:end]
-    assert asp_call["liquid_height"] == liquid_heights[start:end]
-    assert asp_call["blow_out_air_volume"] == blow_out_air_volume[start:end]
-    assert dis_call["flow_rates"] == dis_flow_rates[start:end]
-    assert dis_call["offsets"] == offsets[start:end]
-    assert dis_call["liquid_height"] == liquid_heights[start:end]
-    assert dis_call["blow_out_air_volume"] == blow_out_air_volume[start:end]
-
-
-def test_one_to_one_eight_channel_handles_32_tasks_four_batches():
-  lh = FakeLiquidHandler(channel_num=8)
-  lh.current_tip = iter(make_tip_iter(1024))
-
-  sources = [DummyContainer(f"S{i}") for i in range(32)]
-  targets = [DummyContainer(f"T{i}") for i in range(32)]
-  asp_vols = [i + 1 for i in range(32)]
-  dis_vols = [300 + i for i in range(32)]
-
-  run(
-    lh.transfer_liquid(
-      sources=sources,
-      targets=targets,
-      tip_racks=[],
-      use_channels=list(range(8)),
-      asp_vols=asp_vols,
-      dis_vols=dis_vols,
-      mix_times=0,
-    )
-  )
-
-  pick_calls = [name for name, _ in lh.calls if name == "pick_up_tips"]
-  aspirates = [payload for name, payload in lh.calls if name == "aspirate"]
-  dispenses = [payload for name, payload in lh.calls if name == "dispense"]
-  assert len(pick_calls) == 4
-  assert len(aspirates) == len(dispenses) == 4
-  assert aspirates[0]["resources"] == sources[0:8]
-  assert aspirates[-1]["resources"] == sources[24:32]
-  assert dispenses[0]["resources"] == targets[0:8]
-  assert dispenses[-1]["resources"] == targets[24:32]
-
-
-def test_one_to_many_single_channel_aspirates_total_when_asp_vol_too_small():
-  lh = FakeLiquidHandler(channel_num=1)
-  lh.current_tip = iter(make_tip_iter(64))
-
-  source = DummyContainer("SRC")
-  targets = [DummyContainer(f"T{i}") for i in range(3)]
-  dis_vols = [10, 20, 30]  # sum=60
-
-  run(
-    lh.transfer_liquid(
-      sources=[source],
-      targets=targets,
-      tip_racks=[],
-      use_channels=[0],
-      asp_vols=10,  # 小于 sum(dis_vols) -> 应吸 60
-      dis_vols=dis_vols,
-      mix_times=0,
-    )
-  )
-
-  aspirates = [payload for name, payload in lh.calls if name == "aspirate"]
-  assert len(aspirates) == 1
-  assert aspirates[0]["resources"] == [source]
-  assert aspirates[0]["vols"] == [60.0]
-  assert aspirates[0]["use_channels"] == [0]
-  dispenses = [payload for name, payload in lh.calls if name == "dispense"]
-  assert [d["vols"][0] for d in dispenses] == [10.0, 20.0, 30.0]
-
-
-def test_one_to_many_eight_channel_basic():
-  lh = FakeLiquidHandler(channel_num=8)
-  lh.current_tip = iter(make_tip_iter(128))
-
-  source = DummyContainer("SRC")
-  targets = [DummyContainer(f"T{i}") for i in range(8)]
-  dis_vols = [i + 1 for i in range(8)]
-
-  run(
-    lh.transfer_liquid(
-      sources=[source],
-      targets=targets,
-      tip_racks=[],
-      use_channels=list(range(8)),
-      asp_vols=999,  # one-to-many 8ch 会按 dis_vols 吸（每通道各自）
-      dis_vols=dis_vols,
-      mix_times=0,
-    )
-  )
-
-  aspirates = [payload for name, payload in lh.calls if name == "aspirate"]
-  assert aspirates[0]["resources"] == [source] * 8
-  assert aspirates[0]["vols"] == [float(v) for v in dis_vols]
-  dispenses = [payload for name, payload in lh.calls if name == "dispense"]
-  assert dispenses[0]["resources"] == targets
-  assert dispenses[0]["vols"] == [float(v) for v in dis_vols]
-
-
-def test_many_to_one_single_channel_standard_dispense_equals_asp_by_default():
-  lh = FakeLiquidHandler(channel_num=1)
-  lh.current_tip = iter(make_tip_iter(128))
-
-  sources = [DummyContainer(f"S{i}") for i in range(3)]
-  target = DummyContainer("T")
-  asp_vols = [5, 6, 7]
-
-  run(
-    lh.transfer_liquid(
-      sources=sources,
-      targets=[target],
-      tip_racks=[],
-      use_channels=[0],
-      asp_vols=asp_vols,
-      dis_vols=1,  # many-to-one 允许标量；非比例模式下实际每次分液=对应 asp_vol
-      mix_times=0,
-    )
-  )
-
-  dispenses = [payload for name, payload in lh.calls if name == "dispense"]
-  assert [d["vols"][0] for d in dispenses] == [float(v) for v in asp_vols]
-  assert all(d["resources"] == [target] for d in dispenses)
-
-
-def test_many_to_one_single_channel_before_stage_mixes_target_once():
-  lh = FakeLiquidHandler(channel_num=1)
-  lh.current_tip = iter(make_tip_iter(128))
-
-  sources = [DummyContainer("S0"), DummyContainer("S1")]
-  target = DummyContainer("T")
-
-  run(
-    lh.transfer_liquid(
-      sources=sources,
-      targets=[target],
-      tip_racks=[],
-      use_channels=[0],
-      asp_vols=[5, 6],
-      dis_vols=1,
-      mix_stage="before",
-      mix_times=2,
-      mix_vol=4,
-    )
-  )
-
-  aspirate_calls = [(idx, payload) for idx, (name, payload) in enumerate(lh.calls) if name == "aspirate"]
-  assert len(aspirate_calls) >= 1
-  mix_idx, mix_payload = aspirate_calls[0]
-  assert mix_payload["resources"] == [target]
-  assert mix_payload["vols"] == [4]
-  # 第一個 mix 之後會真正開始吸 source
-  assert any(call["resources"] == [sources[0]] for _, call in aspirate_calls[1:])
-
-
-def test_many_to_one_single_channel_proportional_mixing_uses_dis_vols_per_source():
-  lh = FakeLiquidHandler(channel_num=1)
-  lh.current_tip = iter(make_tip_iter(128))
-
-  sources = [DummyContainer(f"S{i}") for i in range(3)]
-  target = DummyContainer("T")
-  asp_vols = [5, 6, 7]
-  dis_vols = [1, 2, 3]
-
-  run(
-    lh.transfer_liquid(
-      sources=sources,
-      targets=[target],
-      tip_racks=[],
-      use_channels=[0],
-      asp_vols=asp_vols,
-      dis_vols=dis_vols,  # 比例模式
-      mix_times=0,
-    )
-  )
-
-  dispenses = [payload for name, payload in lh.calls if name == "dispense"]
-  assert [d["vols"][0] for d in dispenses] == [float(v) for v in dis_vols]
-
-
-def test_many_to_one_eight_channel_basic():
-  lh = FakeLiquidHandler(channel_num=8)
-  lh.current_tip = iter(make_tip_iter(256))
-
-  sources = [DummyContainer(f"S{i}") for i in range(8)]
-  target = DummyContainer("T")
-  asp_vols = [10 + i for i in range(8)]
-
-  run(
-    lh.transfer_liquid(
-      sources=sources,
-      targets=[target],
-      tip_racks=[],
-      use_channels=list(range(8)),
-      asp_vols=asp_vols,
-      dis_vols=999,  # 非比例模式下每通道分液=对应 asp_vol
-      mix_times=0,
-    )
-  )
-
-  aspirates = [payload for name, payload in lh.calls if name == "aspirate"]
-  dispenses = [payload for name, payload in lh.calls if name == "dispense"]
-  assert aspirates[0]["resources"] == sources
-  assert aspirates[0]["vols"] == [float(v) for v in asp_vols]
-  assert dispenses[0]["resources"] == [target] * 8
-  assert dispenses[0]["vols"] == [float(v) for v in asp_vols]
-
-
-def test_transfer_liquid_mode_detection_unsupported_shape_raises():
-  lh = FakeLiquidHandler(channel_num=8)
-  lh.current_tip = iter(make_tip_iter(64))
-
-  sources = [DummyContainer("S0"), DummyContainer("S1")]
-  targets = [DummyContainer("T0"), DummyContainer("T1"), DummyContainer("T2")]
-
-  with pytest.raises(ValueError, match="Unsupported transfer mode"):
-    run(
-      lh.transfer_liquid(
-        sources=sources,
-        targets=targets,
-        tip_racks=[],
-        use_channels=[0],
-        asp_vols=[1, 1],
-        dis_vols=[1, 1, 1],
-        mix_times=0,
-      )
-    )
-
-
-def test_mix_single_target_produces_matching_cycles():
-  lh = FakeLiquidHandler(channel_num=1)
-  target = DummyContainer("T_mix")
-
-  run(lh.mix(targets=[target], mix_time=2, mix_vol=5))
-
-  aspirates = [payload for name, payload in lh.calls if name == "aspirate"]
-  dispenses = [payload for name, payload in lh.calls if name == "dispense"]
-  assert len(aspirates) == len(dispenses) == 2
-  assert all(call["resources"] == [target] for call in aspirates)
-  assert all(call["vols"] == [5] for call in aspirates)
-  assert all(call["resources"] == [target] for call in dispenses)
-  assert all(call["vols"] == [5] for call in dispenses)
-
-
-def test_mix_multiple_targets_supports_per_target_offsets():
-  lh = FakeLiquidHandler(channel_num=1)
-  targets = [DummyContainer("T0"), DummyContainer("T1")]
-  offsets = ["left", "right"]
-  heights = [0.1, 0.2]
-  rates = [0.5, 1.0]
-
-  run(
-    lh.mix(
-      targets=targets,
-      mix_time=1,
-      mix_vol=3,
-      offsets=offsets,
-      height_to_bottom=heights,
-      mix_rate=rates,
-    )
-  )
-
-  aspirates = [payload for name, payload in lh.calls if name == "aspirate"]
-  assert len(aspirates) == 2
-  assert aspirates[0]["resources"] == [targets[0]]
-  assert aspirates[0]["offsets"] == [offsets[0]]
-  assert aspirates[0]["liquid_height"] == [heights[0]]
-  assert aspirates[0]["flow_rates"] == [rates[0]]
-  assert aspirates[1]["resources"] == [targets[1]]
-  assert aspirates[1]["offsets"] == [offsets[1]]
-  assert aspirates[1]["liquid_height"] == [heights[1]]
-  assert aspirates[1]["flow_rates"] == [rates[1]]
-
-

unilabos/__init__.py

@@ -1 +1 @@
-__version__ = "0.10.17"
+__version__ = "0.10.19"

unilabos/__main__.py

@@ -0,0 +1,6 @@
+"""Entry point for `python -m unilabos`."""
+
+from unilabos.app.main import main
+
+if __name__ == "__main__":
+    main()

unilabos/app/main.py

@@ -1,8 +1,10 @@
 import argparse
 import asyncio
 import os
+import platform
 import shutil
 import signal
+import subprocess
 import sys
 import threading
 import time
@@ -24,6 +26,84 @@ from unilabos.config.config import load_config, BasicConfig, HTTPConfig
 _restart_requested: bool = False
 _restart_reason: str = ""
 
+RESTART_EXIT_CODE = 42
+
+
+def _build_child_argv():
+    """Build sys.argv for child process, stripping supervisor-only arguments."""
+    result = []
+    skip_next = False
+    for arg in sys.argv:
+        if skip_next:
+            skip_next = False
+            continue
+        if arg in ("--restart_mode", "--restart-mode"):
+            continue
+        if arg in ("--auto_restart_count", "--auto-restart-count"):
+            skip_next = True
+            continue
+        if arg.startswith("--auto_restart_count=") or arg.startswith("--auto-restart-count="):
+            continue
+        result.append(arg)
+    return result
+
+
+def _run_as_supervisor(max_restarts: int):
+    """
+    Supervisor process that spawns and monitors child processes.
+
+    Similar to Uvicorn's --reload: the supervisor itself does no heavy work,
+    it only launches the real process as a child and restarts it when the child
+    exits with RESTART_EXIT_CODE.
+    """
+    child_argv = [sys.executable] + _build_child_argv()
+    restart_count = 0
+
+    print_status(
+        f"[Supervisor] Restart mode enabled (max restarts: {max_restarts}), "
+        f"child command: {' '.join(child_argv)}",
+        "info",
+    )
+
+    while True:
+        print_status(
+            f"[Supervisor] Launching process (restart {restart_count}/{max_restarts})...",
+            "info",
+        )
+
+        try:
+            process = subprocess.Popen(child_argv)
+            exit_code = process.wait()
+        except KeyboardInterrupt:
+            print_status("[Supervisor] Interrupted, terminating child process...", "info")
+            process.terminate()
+            try:
+                process.wait(timeout=10)
+            except subprocess.TimeoutExpired:
+                process.kill()
+                process.wait()
+            sys.exit(1)
+
+        if exit_code == RESTART_EXIT_CODE:
+            restart_count += 1
+            if restart_count > max_restarts:
+                print_status(
+                    f"[Supervisor] Maximum restart count ({max_restarts}) reached, exiting",
+                    "warning",
+                )
+                sys.exit(1)
+            print_status(
+                f"[Supervisor] Child requested restart ({restart_count}/{max_restarts}), restarting in 2s...",
+                "info",
+            )
+            time.sleep(2)
+        else:
+            if exit_code != 0:
+                print_status(f"[Supervisor] Child exited with code {exit_code}", "warning")
+            else:
+                print_status("[Supervisor] Child exited normally", "info")
+            sys.exit(exit_code)
+
 
 def load_config_from_file(config_path):
     if config_path is None:
@@ -65,6 +145,13 @@ def parse_args():
         action="append",
         help="Path to the registry directory",
     )
+    parser.add_argument(
+        "--devices",
+        type=str,
+        default=None,
+        action="append",
+        help="Path to Python code directory for AST-based device/resource scanning",
+    )
     parser.add_argument(
         "--working_dir",
         type=str,
@@ -154,23 +241,47 @@ def parse_args():
         action="store_true",
         help="Skip environment dependency check on startup",
     )
-    parser.add_argument(
-        "--complete_registry",
-        action="store_true",
-        default=False,
-        help="Complete registry information",
-    )
     parser.add_argument(
         "--check_mode",
         action="store_true",
         default=False,
         help="Run in check mode for CI: validates registry imports and ensures no file changes",
     )
+    parser.add_argument(
+        "--complete_registry",
+        action="store_true",
+        default=False,
+        help="Complete and rewrite YAML registry files using AST analysis results",
+    )
     parser.add_argument(
         "--no_update_feedback",
         action="store_true",
         help="Disable sending update feedback to server",
     )
+    parser.add_argument(
+        "--test_mode",
+        action="store_true",
+        default=False,
+        help="Test mode: all actions simulate execution and return mock results without running real hardware",
+    )
+    parser.add_argument(
+        "--extra_resource",
+        action="store_true",
+        default=False,
+        help="Load extra lab_ prefixed labware resources (529 auto-generated definitions from lab_resources.py)",
+    )
+    parser.add_argument(
+        "--restart_mode",
+        action="store_true",
+        default=False,
+        help="Enable supervisor mode: automatically restart the process when triggered via WebSocket",
+    )
+    parser.add_argument(
+        "--auto_restart_count",
+        type=int,
+        default=500,
+        help="Maximum number of automatic restarts in restart mode (default: 500)",
+    )
     # workflow upload subcommand
     workflow_parser = subparsers.add_parser(
         "workflow_upload",
@@ -204,6 +315,12 @@ def parse_args():
         default=False,
         help="Whether to publish the workflow (default: False)",
     )
+    workflow_parser.add_argument(
+        "--description",
+        type=str,
+        default="",
+        help="Workflow description, used when publishing the workflow",
+    )
     return parser
 
 
@@ -215,6 +332,11 @@ def main():
     args = parser.parse_args()
     args_dict = vars(args)
 
+    # Supervisor mode: spawn child processes and monitor for restart
+    if args_dict.get("restart_mode", False):
+        _run_as_supervisor(args_dict.get("auto_restart_count", 5))
+        return
+
     # 环境检查 - 检查并自动安装必需的包 (可选)
     skip_env_check = args_dict.get("skip_env_check", False)
     check_mode = args_dict.get("check_mode", False)
@@ -231,48 +353,56 @@ def main():
     # 加载配置文件，优先加载config，然后从env读取
     config_path = args_dict.get("config")
 
-    if check_mode:
+    # === 解析 working_dir ===
-        args_dict["working_dir"] = os.path.abspath(os.getcwd())
+    # 规则1: working_dir 传入 → 检测 unilabos_data 子目录，已是则不修改
-    # 当 skip_env_check 时，默认使用当前目录作为 working_dir
+    # 规则2: 仅 config_path 传入 → 用其父目录作为 working_dir
-    if skip_env_check and not args_dict.get("working_dir") and not config_path:
+    # 规则4: 两者都传入 → 各用各的，但 working_dir 仍做 unilabos_data 子目录检测
-        working_dir = os.path.abspath(os.getcwd())
+    raw_working_dir = args_dict.get("working_dir")
-        print_status(f"跳过环境检查模式：使用当前目录作为工作目录 {working_dir}", "info")
+    if raw_working_dir:
-        # 检查当前目录是否有 local_config.py
+        working_dir = os.path.abspath(raw_working_dir)
-        local_config_in_cwd = os.path.join(working_dir, "local_config.py")
+    elif config_path and os.path.exists(config_path):
-        if os.path.exists(local_config_in_cwd):
+        working_dir = os.path.dirname(os.path.abspath(config_path))
-            config_path = local_config_in_cwd
-            print_status(f"发现本地配置文件: {config_path}", "info")
     else:
-            print_status(f"未指定config路径，可通过 --config 传入 local_config.py 文件路径", "info")
-    elif os.getcwd().endswith("unilabos_data"):
         working_dir = os.path.abspath(os.getcwd())
-    else:
+
+    # unilabos_data 子目录自动检测
+    if os.path.basename(working_dir) != "unilabos_data":
+        unilabos_data_sub = os.path.join(working_dir, "unilabos_data")
+        if os.path.isdir(unilabos_data_sub):
+            working_dir = unilabos_data_sub
+        elif not raw_working_dir and not (config_path and os.path.exists(config_path)):
+            # 未显式指定路径，默认使用 cwd/unilabos_data
             working_dir = os.path.abspath(os.path.join(os.getcwd(), "unilabos_data"))
 
-    if args_dict.get("working_dir"):
+    # === 解析 config_path ===
-        working_dir = args_dict.get("working_dir", "")
     if config_path and not os.path.exists(config_path):
-            config_path = os.path.join(working_dir, "local_config.py")
+        # config_path 传入但不存在，尝试在 working_dir 中查找
-            if not os.path.exists(config_path):
+        candidate = os.path.join(working_dir, "local_config.py")
+        if os.path.exists(candidate):
+            config_path = candidate
+            print_status(f"在工作目录中发现配置文件: {config_path}", "info")
+        else:
             print_status(
-                    f"当前工作目录 {working_dir} 未找到local_config.py，请通过 --config 传入 local_config.py 文件路径",
+                f"配置文件 {config_path} 不存在，工作目录 {working_dir} 中也未找到 local_config.py，"
+                f"请通过 --config 传入 local_config.py 文件路径",
                 "error",
             )
             os._exit(1)
-    elif config_path and os.path.exists(config_path):
+    elif not config_path:
-        working_dir = os.path.dirname(config_path)
+        # 规则3: 未传入 config_path，尝试 working_dir/local_config.py
-    elif os.path.exists(working_dir) and os.path.exists(os.path.join(working_dir, "local_config.py")):
+        candidate = os.path.join(working_dir, "local_config.py")
-        config_path = os.path.join(working_dir, "local_config.py")
+        if os.path.exists(candidate):
-    elif not skip_env_check and not config_path and (
+            config_path = candidate
-        not os.path.exists(working_dir) or not os.path.exists(os.path.join(working_dir, "local_config.py"))
+            print_status(f"发现本地配置文件: {config_path}", "info")
-    ):
+        else:
             print_status(f"未指定config路径，可通过 --config 传入 local_config.py 文件路径", "info")
             print_status(f"您是否为第一次使用？并将当前路径 {working_dir} 作为工作目录？ (Y/n)", "info")
-        if input() != "n":
+            if check_mode or input() != "n":
                 os.makedirs(working_dir, exist_ok=True)
                 config_path = os.path.join(working_dir, "local_config.py")
                 shutil.copy(
-                os.path.join(os.path.dirname(os.path.dirname(__file__)), "config", "example_config.py"), config_path
+                    os.path.join(os.path.dirname(os.path.dirname(__file__)), "config", "example_config.py"),
+                    config_path,
                 )
                 print_status(f"已创建 local_config.py 路径： {config_path}", "info")
             else:
@@ -288,7 +418,9 @@ def main():
 
     if hasattr(BasicConfig, "log_level"):
         logger.info(f"Log level set to '{BasicConfig.log_level}' from config file.")
-    configure_logger(loglevel=BasicConfig.log_level, working_dir=working_dir)
+    file_path = configure_logger(loglevel=BasicConfig.log_level, working_dir=working_dir)
+    if file_path is not None:
+        logger.info(f"[LOG_FILE] {file_path}")
 
     if args.addr != parser.get_default("addr"):
         if args.addr == "test":
@@ -332,8 +464,14 @@ def main():
     BasicConfig.slave_no_host = args_dict.get("slave_no_host", False)
     BasicConfig.upload_registry = args_dict.get("upload_registry", False)
     BasicConfig.no_update_feedback = args_dict.get("no_update_feedback", False)
+    BasicConfig.test_mode = args_dict.get("test_mode", False)
+    if BasicConfig.test_mode:
+        print_status("启用测试模式：所有动作将模拟执行，不调用真实硬件", "warning")
+    BasicConfig.extra_resource = args_dict.get("extra_resource", False)
+    if BasicConfig.extra_resource:
+        print_status("启用额外资源加载：将加载lab_开头的labware资源定义", "info")
     BasicConfig.communication_protocol = "websocket"
-    machine_name = os.popen("hostname").read().strip()
+    machine_name = platform.node()
     machine_name = "".join([c if c.isalnum() or c == "_" else "_" for c in machine_name])
     BasicConfig.machine_name = machine_name
     BasicConfig.vis_2d_enable = args_dict["2d_vis"]
@@ -356,22 +494,32 @@ def main():
     # 显示启动横幅
     print_unilab_banner(args_dict)
 
-    # 注册表 - check_mode 时强制启用 complete_registry
+    # Step 0: AST 分析优先 + YAML 注册表加载
+    # check_mode 和 upload_registry 都会执行实际 import 验证
+    devices_dirs = args_dict.get("devices", None)
     complete_registry = args_dict.get("complete_registry", False) or check_mode
-    lab_registry = build_registry(args_dict["registry_path"], complete_registry, BasicConfig.upload_registry)
+    lab_registry = build_registry(
+        registry_paths=args_dict["registry_path"],
+        devices_dirs=devices_dirs,
+        upload_registry=BasicConfig.upload_registry,
+        check_mode=check_mode,
+        complete_registry=complete_registry,
+    )
 
-    # Check mode: complete_registry 完成后直接退出，git diff 检测由 CI workflow 执行
+    # Check mode: 注册表验证完成后直接退出
     if check_mode:
-        print_status("Check mode: complete_registry 完成，退出", "info")
+        device_count = len(lab_registry.device_type_registry)
+        resource_count = len(lab_registry.resource_type_registry)
+        print_status(f"Check mode: 注册表验证完成 ({device_count} 设备, {resource_count} 资源)，退出", "info")
         os._exit(0)
 
+    # Step 1: 上传全部注册表到服务端，同步保存到 unilabos_data
     if BasicConfig.upload_registry:
-        # 设备注册到服务端 - 需要 ak 和 sk
         if BasicConfig.ak and BasicConfig.sk:
-            print_status("开始注册设备到服务端...", "info")
+            # print_status("开始注册设备到服务端...", "info")
             try:
                 register_devices_and_resources(lab_registry)
-                print_status("设备注册完成", "info")
+                # print_status("设备注册完成", "info")
             except Exception as e:
                 print_status(f"设备注册失败: {e}", "error")
         else:
@@ -456,7 +604,7 @@ def main():
             continue
 
     # 如果从远端获取了物料信息，则与本地物料进行同步
-    if request_startup_json and "nodes" in request_startup_json:
+    if file_path is not None and request_startup_json and "nodes" in request_startup_json:
         print_status("开始同步远端物料到本地...", "info")
         remote_tree_set = ResourceTreeSet.from_raw_dict_list(request_startup_json["nodes"])
         resource_tree_set.merge_remote_resources(remote_tree_set)
@@ -553,6 +701,10 @@ def main():
             open_browser=not args_dict["disable_browser"],
             port=BasicConfig.port,
         )
+        if restart_requested:
+            print_status("[Main] Restart requested, cleaning up...", "info")
+            cleanup_for_restart()
+            os._exit(RESTART_EXIT_CODE)
 
 
 if __name__ == "__main__":

unilabos/app/model.py

@@ -54,6 +54,7 @@ class JobAddReq(BaseModel):
     action_type: str = Field(
         examples=["unilabos_msgs.action._str_single_input.StrSingleInput"], description="action type", default=""
     )
+    sample_material: dict = Field(examples=[{"string": "string"}], description="sample uuid to material uuid")
     action_args: dict = Field(examples=[{"string": "string"}], description="action arguments", default_factory=dict)
     task_id: str = Field(examples=["task_id"], description="task uuid (auto-generated if empty)", default="")
     job_id: str = Field(examples=["job_id"], description="goal uuid (auto-generated if empty)", default="")

unilabos/app/register.py

@@ -1,9 +1,8 @@
-import json
 import time
-from typing import Optional, Tuple, Dict, Any
+from typing import Any, Dict, Optional, Tuple
 
 from unilabos.utils.log import logger
-from unilabos.utils.type_check import TypeEncoder
+from unilabos.utils.tools import normalize_json as _normalize_device
 
 
 def register_devices_and_resources(lab_registry, gather_only=False) -> Optional[Tuple[Dict[str, Any], Dict[str, Any]]]:
@@ -11,50 +10,63 @@ def register_devices_and_resources(lab_registry, gather_only=False) -> Optional[
     注册设备和资源到服务器（仅支持HTTP）
     """
 
-    # 注册资源信息 - 使用HTTP方式
     from unilabos.app.web.client import http_client
 
     logger.info("[UniLab Register] 开始注册设备和资源...")
 
-    # 注册设备信息
     devices_to_register = {}
     for device_info in lab_registry.obtain_registry_device_info():
-        devices_to_register[device_info["id"]] = json.loads(
+        devices_to_register[device_info["id"]] = _normalize_device(device_info)
-            json.dumps(device_info, ensure_ascii=False, cls=TypeEncoder)
+        logger.trace(f"[UniLab Register] 收集设备: {device_info['id']}")
-        )
-        logger.debug(f"[UniLab Register] 收集设备: {device_info['id']}")
 
     resources_to_register = {}
     for resource_info in lab_registry.obtain_registry_resource_info():
         resources_to_register[resource_info["id"]] = resource_info
-        logger.debug(f"[UniLab Register] 收集资源: {resource_info['id']}")
+        logger.trace(f"[UniLab Register] 收集资源: {resource_info['id']}")
 
     if gather_only:
         return devices_to_register, resources_to_register
-    # 注册设备
+
     if devices_to_register:
         try:
             start_time = time.time()
-            response = http_client.resource_registry({"resources": list(devices_to_register.values())})
+            response = http_client.resource_registry(
+                {"resources": list(devices_to_register.values())},
+                tag="device_registry",
+            )
             cost_time = time.time() - start_time
-            if response.status_code in [200, 201]:
+            res_data = response.json() if response.status_code == 200 else {}
-                logger.info(f"[UniLab Register] 成功注册 {len(devices_to_register)} 个设备 {cost_time}ms")
+            skipped = res_data.get("data", {}).get("skipped", False)
+            if skipped:
+                logger.info(
+                    f"[UniLab Register] 设备注册跳过（内容未变化）"
+                    f" {len(devices_to_register)} 个 {cost_time:.3f}s"
+                )
+            elif response.status_code in [200, 201]:
+                logger.info(f"[UniLab Register] 成功注册 {len(devices_to_register)} 个设备 {cost_time:.3f}s")
             else:
-                logger.error(f"[UniLab Register] 设备注册失败: {response.status_code}, {response.text} {cost_time}ms")
+                logger.error(f"[UniLab Register] 设备注册失败: {response.status_code}, {response.text} {cost_time:.3f}s")
         except Exception as e:
             logger.error(f"[UniLab Register] 设备注册异常: {e}")
 
-    # 注册资源
     if resources_to_register:
         try:
             start_time = time.time()
-            response = http_client.resource_registry({"resources": list(resources_to_register.values())})
+            response = http_client.resource_registry(
+                {"resources": list(resources_to_register.values())},
+                tag="resource_registry",
+            )
             cost_time = time.time() - start_time
-            if response.status_code in [200, 201]:
+            res_data = response.json() if response.status_code == 200 else {}
-                logger.info(f"[UniLab Register] 成功注册 {len(resources_to_register)} 个资源 {cost_time}ms")
+            skipped = res_data.get("data", {}).get("skipped", False)
+            if skipped:
+                logger.info(
+                    f"[UniLab Register] 资源注册跳过（内容未变化）"
+                    f" {len(resources_to_register)} 个 {cost_time:.3f}s"
+                )
+            elif response.status_code in [200, 201]:
+                logger.info(f"[UniLab Register] 成功注册 {len(resources_to_register)} 个资源 {cost_time:.3f}s")
             else:
-                logger.error(f"[UniLab Register] 资源注册失败: {response.status_code}, {response.text} {cost_time}ms")
+                logger.error(f"[UniLab Register] 资源注册失败: {response.status_code}, {response.text} {cost_time:.3f}s")
         except Exception as e:
             logger.error(f"[UniLab Register] 资源注册异常: {e}")
-
-    logger.info("[UniLab Register] 设备和资源注册完成.")

unilabos/app/web/api.py

@@ -1052,7 +1052,7 @@ async def handle_file_import(websocket: WebSocket, request_data: dict):
                                 "result": {},
                                 "schema": lab_registry._generate_unilab_json_command_schema(v["args"], k),
                                 "goal_default": {i["name"]: i["default"] for i in v["args"]},
-                                "handles": [],
+                                "handles": {},
                             }
                             # 不生成已配置action的动作
                             for k, v in enhanced_info["action_methods"].items()
@@ -1340,5 +1340,5 @@ def setup_api_routes(app):
     # 启动广播任务
     @app.on_event("startup")
     async def startup_event():
-        asyncio.create_task(broadcast_device_status())
+        asyncio.create_task(broadcast_device_status(), name="web-api-startup-device")
-        asyncio.create_task(broadcast_status_page_data())
+        asyncio.create_task(broadcast_status_page_data(), name="web-api-startup-status")

unilabos/app/web/client.py

@@ -3,11 +3,13 @@ HTTP客户端模块
 
 提供与远程服务器通信的客户端功能，只有host需要用
 """
-
+import gzip
 import json
 import os
 from typing import List, Dict, Any, Optional
 
+from unilabos.utils.tools import fast_dumps as _fast_dumps, fast_dumps_pretty as _fast_dumps_pretty
+
 import requests
 from unilabos.resources.resource_tracker import ResourceTreeSet
 from unilabos.utils.log import info
@@ -280,22 +282,54 @@ class HTTPClient:
             )
         return response
 
-    def resource_registry(self, registry_data: Dict[str, Any] | List[Dict[str, Any]]) -> requests.Response:
+    def resource_registry(
+        self, registry_data: Dict[str, Any] | List[Dict[str, Any]], tag: str = "registry",
+    ) -> requests.Response:
         """
-        注册资源到服务器
+        注册资源到服务器，同步保存请求/响应到 unilabos_data
 
         Args:
             registry_data: 注册表数据，格式为 {resource_id: resource_info} / [{resource_info}]
+            tag: 保存文件的标签后缀 (如 "device_registry" / "resource_registry")
 
         Returns:
             Response: API响应对象
         """
+        # 序列化一次，同时用于保存和发送
+        json_bytes = _fast_dumps(registry_data)
+
+        # 保存请求数据到 unilabos_data
+        req_path = os.path.join(BasicConfig.working_dir, f"req_{tag}_upload.json")
+        try:
+            os.makedirs(BasicConfig.working_dir, exist_ok=True)
+            with open(req_path, "wb") as f:
+                f.write(_fast_dumps_pretty(registry_data))
+            logger.trace(f"注册表请求数据已保存: {req_path}")
+        except Exception as e:
+            logger.warning(f"保存注册表请求数据失败: {e}")
+
+        compressed_body = gzip.compress(json_bytes)
+        headers = {
+            "Authorization": f"Lab {self.auth}",
+            "Content-Type": "application/json",
+            "Content-Encoding": "gzip",
+        }
         response = requests.post(
             f"{self.remote_addr}/lab/resource",
-            json=registry_data,
+            data=compressed_body,
-            headers={"Authorization": f"Lab {self.auth}"},
+            headers=headers,
             timeout=30,
         )
+
+        # 保存响应数据到 unilabos_data
+        res_path = os.path.join(BasicConfig.working_dir, f"res_{tag}_upload.json")
+        try:
+            with open(res_path, "w", encoding="utf-8") as f:
+                f.write(f"{response.status_code}\n{response.text}")
+            logger.trace(f"注册表响应数据已保存: {res_path}")
+        except Exception as e:
+            logger.warning(f"保存注册表响应数据失败: {e}")
+
         if response.status_code not in [200, 201]:
             logger.error(f"注册资源失败: {response.status_code}, {response.text}")
         if response.status_code == 200:
@@ -343,9 +377,10 @@ class HTTPClient:
         edges: List[Dict[str, Any]],
         tags: Optional[List[str]] = None,
         published: bool = False,
+        description: str = "",
     ) -> Dict[str, Any]:
         """
-        导入工作流到服务器
+        导入工作流到服务器，如果 published 为 True，则额外发起发布请求
 
         Args:
             name: 工作流名称（顶层）
@@ -355,6 +390,7 @@ class HTTPClient:
             edges: 工作流边列表
             tags: 工作流标签列表，默认为空列表
             published: 是否发布工作流，默认为False
+            description: 工作流描述，发布时使用
 
         Returns:
             Dict: API响应数据，包含 code 和 data (uuid, name)
@@ -367,7 +403,6 @@ class HTTPClient:
                 "nodes": nodes,
                 "edges": edges,
                 "tags": tags if tags is not None else [],
-                "published": published,
             },
         }
         # 保存请求到文件
@@ -389,10 +424,50 @@ class HTTPClient:
             if "code" in res and res["code"] != 0:
                 logger.error(f"导入工作流失败: {response.text}")
                 return res
+            # 导入成功后，如果需要发布则额外发起发布请求
+            if published:
+                imported_uuid = res.get("data", {}).get("uuid", workflow_uuid)
+                publish_res = self.workflow_publish(imported_uuid, description)
+                res["publish_result"] = publish_res
+            return res
         else:
             logger.error(f"导入工作流失败: {response.status_code}, {response.text}")
             return {"code": response.status_code, "message": response.text}
 
+    def workflow_publish(self, workflow_uuid: str, description: str = "") -> Dict[str, Any]:
+        """
+        发布工作流
+
+        Args:
+            workflow_uuid: 工作流UUID
+            description: 工作流描述
+
+        Returns:
+            Dict: API响应数据
+        """
+        payload = {
+            "uuid": workflow_uuid,
+            "description": description,
+            "published": True,
+        }
+        logger.info(f"正在发布工作流: {workflow_uuid}")
+        response = requests.patch(
+            f"{self.remote_addr}/lab/workflow/owner",
+            json=payload,
+            headers={"Authorization": f"Lab {self.auth}"},
+            timeout=60,
+        )
+        if response.status_code == 200:
+            res = response.json()
+            if "code" in res and res["code"] != 0:
+                logger.error(f"发布工作流失败: {response.text}")
+            else:
+                logger.info(f"工作流发布成功: {workflow_uuid}")
+            return res
+        else:
+            logger.error(f"发布工作流失败: {response.status_code}, {response.text}")
+            return {"code": response.status_code, "message": response.text}
+
 
 # 创建默认客户端实例
 http_client = HTTPClient()

unilabos/app/web/controller.py

@@ -58,14 +58,14 @@ class JobResultStore:
                 feedback=feedback or {},
                 timestamp=time.time(),
             )
-            logger.debug(f"[JobResultStore] Stored result for job {job_id[:8]}, status={status}")
+            logger.trace(f"[JobResultStore] Stored result for job {job_id[:8]}, status={status}")
 
     def get_and_remove(self, job_id: str) -> Optional[JobResult]:
         """获取并删除任务结果"""
         with self._results_lock:
             result = self._results.pop(job_id, None)
             if result:
-                logger.debug(f"[JobResultStore] Retrieved and removed result for job {job_id[:8]}")
+                logger.trace(f"[JobResultStore] Retrieved and removed result for job {job_id[:8]}")
             return result
 
     def get_result(self, job_id: str) -> Optional[JobResult]:
@@ -327,6 +327,7 @@ def job_add(req: JobAddReq) -> JobData:
             queue_item,
             action_type=action_type,
             action_kwargs=action_args,
+            sample_material=req.sample_material,
             server_info=server_info,
         )
 

unilabos/app/web/server.py

@@ -86,7 +86,7 @@ def setup_server() -> FastAPI:
     # 设置页面路由
     try:
         setup_web_pages(pages)
-        info("[Web] 已加载Web UI模块")
+        # info("[Web] 已加载Web UI模块")
     except ImportError as e:
         info(f"[Web] 未找到Web页面模块: {str(e)}")
     except Exception as e:
@@ -138,7 +138,7 @@ def start_server(host: str = "0.0.0.0", port: int = 8002, open_browser: bool = T
     server_thread = threading.Thread(target=server.run, daemon=True, name="uvicorn_server")
     server_thread.start()
 
-    info("[Web] Server started, monitoring for restart requests...")
+    # info("[Web] Server started, monitoring for restart requests...")
 
     # 监控重启标志
     import unilabos.app.main as main_module

unilabos/app/ws_client.py

@@ -23,9 +23,10 @@ from typing import Optional, Dict, Any, List
 from urllib.parse import urlparse
 from enum import Enum
 
-from jedi.inference.gradual.typing import TypedDict
+from typing_extensions import TypedDict
 
 from unilabos.app.model import JobAddReq
+from unilabos.resources.resource_tracker import ResourceDictType
 from unilabos.ros.nodes.presets.host_node import HostNode
 from unilabos.utils.type_check import serialize_result_info
 from unilabos.app.communication import BaseCommunicationClient
@@ -76,6 +77,7 @@ class JobInfo:
     start_time: float
     last_update_time: float = field(default_factory=time.time)
     ready_timeout: Optional[float] = None  # READY状态的超时时间
+    always_free: bool = False  # 是否为永久闲置动作(不受排队限制)
 
     def update_timestamp(self):
         """更新最后更新时间"""
@@ -127,6 +129,15 @@ class DeviceActionManager:
             # 总是将job添加到all_jobs中
             self.all_jobs[job_info.job_id] = job_info
 
+            # always_free的动作不受排队限制，直接设为READY
+            if job_info.always_free:
+                job_info.status = JobStatus.READY
+                job_info.update_timestamp()
+                job_info.set_ready_timeout(10)
+                job_log = format_job_log(job_info.job_id, job_info.task_id, job_info.device_id, job_info.action_name)
+                logger.trace(f"[DeviceActionManager] Job {job_log} always_free, start immediately")
+                return True
+
             # 检查是否有正在执行或准备执行的任务
             if device_key in self.active_jobs:
                 # 有正在执行或准备执行的任务，加入队列
@@ -154,7 +165,7 @@ class DeviceActionManager:
             job_info.set_ready_timeout(10)  # 设置10秒超时
             self.active_jobs[device_key] = job_info
             job_log = format_job_log(job_info.job_id, job_info.task_id, job_info.device_id, job_info.action_name)
-            logger.info(f"[DeviceActionManager] Job {job_log} can start immediately for {device_key}")
+            logger.trace(f"[DeviceActionManager] Job {job_log} can start immediately for {device_key}")
             return True
 
     def start_job(self, job_id: str) -> bool:
@@ -176,9 +187,13 @@ class DeviceActionManager:
                 logger.error(f"[DeviceActionManager] Job {job_log} is not in READY status, current: {job_info.status}")
                 return False
 
+            # always_free的job不需要检查active_jobs
+            if not job_info.always_free:
                 # 检查设备上是否是这个job
                 if device_key not in self.active_jobs or self.active_jobs[device_key].job_id != job_id:
-                job_log = format_job_log(job_info.job_id, job_info.task_id, job_info.device_id, job_info.action_name)
+                    job_log = format_job_log(
+                        job_info.job_id, job_info.task_id, job_info.device_id, job_info.action_name
+                    )
                     logger.error(f"[DeviceActionManager] Job {job_log} is not the active job for {device_key}")
                     return False
 
@@ -203,6 +218,13 @@ class DeviceActionManager:
             job_info = self.all_jobs[job_id]
             device_key = job_info.device_action_key
 
+            # always_free的job直接清理，不影响队列
+            if job_info.always_free:
+                job_info.status = JobStatus.ENDED
+                job_info.update_timestamp()
+                del self.all_jobs[job_id]
+                return None
+
             # 移除活跃任务
             if device_key in self.active_jobs and self.active_jobs[device_key].job_id == job_id:
                 del self.active_jobs[device_key]
@@ -210,8 +232,9 @@ class DeviceActionManager:
                 job_info.update_timestamp()
                 # 从all_jobs中移除已结束的job
                 del self.all_jobs[job_id]
-                job_log = format_job_log(job_info.job_id, job_info.task_id, job_info.device_id, job_info.action_name)
+                # job_log = format_job_log(job_info.job_id, job_info.task_id, job_info.device_id, job_info.action_name)
-                logger.info(f"[DeviceActionManager] Job {job_log} ended for {device_key}")
+                # logger.debug(f"[DeviceActionManager] Job {job_log} ended for {device_key}")
+                pass
             else:
                 job_log = format_job_log(job_info.job_id, job_info.task_id, job_info.device_id, job_info.action_name)
                 logger.warning(f"[DeviceActionManager] Job {job_log} was not active for {device_key}")
@@ -227,15 +250,20 @@ class DeviceActionManager:
                 next_job_log = format_job_log(
                     next_job.job_id, next_job.task_id, next_job.device_id, next_job.action_name
                 )
-                logger.info(f"[DeviceActionManager] Next job {next_job_log} can start for {device_key}")
+                logger.trace(f"[DeviceActionManager] Next job {next_job_log} can start for {device_key}")
                 return next_job
 
             return None
 
     def get_active_jobs(self) -> List[JobInfo]:
-        """获取所有正在执行的任务"""
+        """获取所有正在执行的任务(含active_jobs和always_free的STARTED job)"""
         with self.lock:
-            return list(self.active_jobs.values())
+            jobs = list(self.active_jobs.values())
+            # 补充 always_free 的 STARTED job(它们不在 active_jobs 中)
+            for job in self.all_jobs.values():
+                if job.always_free and job.status == JobStatus.STARTED and job not in jobs:
+                    jobs.append(job)
+            return jobs
 
     def get_queued_jobs(self) -> List[JobInfo]:
         """获取所有排队中的任务"""
@@ -260,6 +288,14 @@ class DeviceActionManager:
             job_info = self.all_jobs[job_id]
             device_key = job_info.device_action_key
 
+            # always_free的job直接清理
+            if job_info.always_free:
+                job_info.status = JobStatus.ENDED
+                del self.all_jobs[job_id]
+                job_log = format_job_log(job_info.job_id, job_info.task_id, job_info.device_id, job_info.action_name)
+                logger.trace(f"[DeviceActionManager] Always-free job {job_log} cancelled")
+                return True
+
             # 如果是正在执行的任务
             if device_key in self.active_jobs and self.active_jobs[device_key].job_id == job_id:
                 # 清理active job状态
@@ -268,7 +304,7 @@ class DeviceActionManager:
                 # 从all_jobs中移除
                 del self.all_jobs[job_id]
                 job_log = format_job_log(job_info.job_id, job_info.task_id, job_info.device_id, job_info.action_name)
-                logger.info(f"[DeviceActionManager] Active job {job_log} cancelled for {device_key}")
+                logger.trace(f"[DeviceActionManager] Active job {job_log} cancelled for {device_key}")
 
                 # 启动下一个任务
                 if device_key in self.device_queues and self.device_queues[device_key]:
@@ -281,7 +317,7 @@ class DeviceActionManager:
                     next_job_log = format_job_log(
                         next_job.job_id, next_job.task_id, next_job.device_id, next_job.action_name
                     )
-                    logger.info(f"[DeviceActionManager] Next job {next_job_log} can start after cancel")
+                    logger.trace(f"[DeviceActionManager] Next job {next_job_log} can start after cancel")
                 return True
 
             # 如果是排队中的任务
@@ -295,7 +331,7 @@ class DeviceActionManager:
                     job_log = format_job_log(
                         job_info.job_id, job_info.task_id, job_info.device_id, job_info.action_name
                     )
-                    logger.info(f"[DeviceActionManager] Queued job {job_log} cancelled for {device_key}")
+                    logger.trace(f"[DeviceActionManager] Queued job {job_log} cancelled for {device_key}")
                     return True
 
             job_log = format_job_log(job_info.job_id, job_info.task_id, job_info.device_id, job_info.action_name)
@@ -333,13 +369,18 @@ class DeviceActionManager:
         timeout_jobs = []
 
         with self.lock:
-            # 统计READY状态的任务数量
+            # 收集所有需要检查的 READY 任务(active_jobs + always_free READY jobs)
-            ready_jobs_count = sum(1 for job in self.active_jobs.values() if job.status == JobStatus.READY)
+            ready_candidates = list(self.active_jobs.values())
+            for job in self.all_jobs.values():
+                if job.always_free and job.status == JobStatus.READY and job not in ready_candidates:
+                    ready_candidates.append(job)
+
+            ready_jobs_count = sum(1 for job in ready_candidates if job.status == JobStatus.READY)
             if ready_jobs_count > 0:
                 logger.trace(f"[DeviceActionManager] Checking {ready_jobs_count} READY jobs for timeout")  # type: ignore  # noqa: E501
 
             # 找到所有超时的READY任务（只检测，不处理）
-            for job_info in self.active_jobs.values():
+            for job_info in ready_candidates:
                 if job_info.is_ready_timeout():
                     timeout_jobs.append(job_info)
                     job_log = format_job_log(
@@ -368,6 +409,7 @@ class MessageProcessor:
         # 线程控制
         self.is_running = False
         self.thread = None
+        self._loop = None  # asyncio event loop引用，用于外部关闭websocket
         self.reconnect_count = 0
 
         logger.info(f"[MessageProcessor] Initialized for URL: {websocket_url}")
@@ -394,22 +436,31 @@ class MessageProcessor:
     def stop(self) -> None:
         """停止消息处理线程"""
         self.is_running = False
+        # 主动关闭websocket以快速中断消息接收循环
+        ws = self.websocket
+        loop = self._loop
+        if ws and loop and loop.is_running():
+            try:
+                asyncio.run_coroutine_threadsafe(ws.close(), loop)
+            except Exception:
+                pass
         if self.thread and self.thread.is_alive():
             self.thread.join(timeout=2)
         logger.info("[MessageProcessor] Stopped")
 
     def _run(self):
         """运行消息处理主循环"""
-        loop = asyncio.new_event_loop()
+        self._loop = asyncio.new_event_loop()
         try:
-            asyncio.set_event_loop(loop)
+            asyncio.set_event_loop(self._loop)
-            loop.run_until_complete(self._connection_handler())
+            self._loop.run_until_complete(self._connection_handler())
         except Exception as e:
             logger.error(f"[MessageProcessor] Thread error: {str(e)}")
             logger.error(traceback.format_exc())
         finally:
-            if loop:
+            if self._loop:
-                loop.close()
+                self._loop.close()
+            self._loop = None
 
     async def _connection_handler(self):
         """处理WebSocket连接和重连逻辑"""
@@ -426,8 +477,10 @@ class MessageProcessor:
                 async with websockets.connect(
                     self.websocket_url,
                     ssl=ssl_context,
+                    open_timeout=20,
                     ping_interval=WSConfig.ping_interval,
                     ping_timeout=10,
+                    close_timeout=5,
                     additional_headers={
                         "Authorization": f"Lab {BasicConfig.auth_secret()}",
                         "EdgeSession": f"{self.session_id}",
@@ -438,53 +491,72 @@ class MessageProcessor:
                     self.connected = True
                     self.reconnect_count = 0
 
-                    logger.trace(f"[MessageProcessor] Connected to {self.websocket_url}")
+                    logger.info(f"[MessageProcessor] 已连接到 {self.websocket_url}")
 
                     # 启动发送协程
-                    send_task = asyncio.create_task(self._send_handler())
+                    send_task = asyncio.create_task(self._send_handler(), name="websocket-send_task")
+
+                    # 每次连接（含重连）后重新向服务端注册，
+                    # 否则服务端不知道客户端已上线，不会推送消息。
+                    if self.websocket_client:
+                        self.websocket_client.publish_host_ready()
 
                     try:
                         # 接收消息循环
                         await self._message_handler()
                     finally:
+                        # 必须在 async with __aexit__ 之前停止 send_task，
+                        # 否则 send_task 会在关闭握手期间继续发送数据，
+                        # 干扰 websockets 库的内部清理，导致 task 泄漏。
+                        self.connected = False
                         send_task.cancel()
                         try:
                             await send_task
                         except asyncio.CancelledError:
                             pass
-                        self.connected = False
 
             except websockets.exceptions.ConnectionClosed:
-                logger.warning("[MessageProcessor] Connection closed")
+                logger.warning("[MessageProcessor] 与服务端连接中断")
-                self.connected = False
+            except TimeoutError:
+                logger.warning(
+                    f"[MessageProcessor] 与服务端连接通信超时 (已尝试 {self.reconnect_count + 1} 次)，请检查您的网络状况"
+                )
+            except websockets.exceptions.InvalidStatus as e:
+                logger.warning(
+                    f"[MessageProcessor] 收到服务端注册码 {e.response.status_code}, 上一进程可能还未退出"
+                )
             except Exception as e:
-                logger.error(f"[MessageProcessor] Connection error: {str(e)}")
                 logger.error(traceback.format_exc())
-                self.connected = False
+                logger.error(f"[MessageProcessor] 尝试重连时出错 {str(e)}")
             finally:
+                self.connected = False
                 self.websocket = None
 
             # 重连逻辑
-            if self.is_running and self.reconnect_count < WSConfig.max_reconnect_attempts:
+            if not self.is_running:
+                break
+            if self.reconnect_count < WSConfig.max_reconnect_attempts:
                 self.reconnect_count += 1
+                backoff = WSConfig.reconnect_interval
                 logger.info(
-                    f"[MessageProcessor] Reconnecting in {WSConfig.reconnect_interval}s "
+                    f"[MessageProcessor] 即将在 {backoff} 秒后重连 (已尝试 {self.reconnect_count}/{WSConfig.max_reconnect_attempts})"
-                    f"(attempt {self.reconnect_count}/{WSConfig.max_reconnect_attempts})"
                 )
-                await asyncio.sleep(WSConfig.reconnect_interval)
+                await asyncio.sleep(backoff)
-            elif self.reconnect_count >= WSConfig.max_reconnect_attempts:
+            else:
                 logger.error("[MessageProcessor] Max reconnection attempts reached")
                 break
-            else:
-                self.reconnect_count -= 1
 
     async def _message_handler(self):
-        """处理接收到的消息"""
+        """处理接收到的消息。
+
+        ConnectionClosed 不在此处捕获，让其向上传播到 _connection_handler，
+        以便 async with websockets.connect() 的 __aexit__ 能感知连接已断，
+        正确清理内部 task，避免 task 泄漏。
+        """
         if not self.websocket:
             logger.error("[MessageProcessor] WebSocket connection is None")
             return
 
-        try:
         async for message in self.websocket:
             try:
                 data = json.loads(message)
@@ -494,8 +566,12 @@ class MessageProcessor:
                     await self._process_message(message_type, message_data)
                 else:
                     if message_type.endswith("_material"):
-                            logger.trace(f"[MessageProcessor] 收到一条归属 {data.get('edge_session')} 的旧消息：{data}")
+                        logger.trace(
-                            logger.debug(f"[MessageProcessor] 跳过了一条归属 {data.get('edge_session')} 的旧消息: {data.get('action')}")
+                            f"[MessageProcessor] 收到一条归属 {data.get('edge_session')} 的旧消息：{data}"
+                        )
+                        logger.debug(
+                            f"[MessageProcessor] 跳过了一条归属 {data.get('edge_session')} 的旧消息: {data.get('action')}"
+                        )
                     else:
                         await self._process_message(message_type, message_data)
             except json.JSONDecodeError:
@@ -504,12 +580,6 @@ class MessageProcessor:
                 logger.error(f"[MessageProcessor] Error processing message: {str(e)}")
                 logger.error(traceback.format_exc())
 
-        except websockets.exceptions.ConnectionClosed:
-            logger.info("[MessageProcessor] Message handler stopped - connection closed")
-        except Exception as e:
-            logger.error(f"[MessageProcessor] Message handler error: {str(e)}")
-            logger.error(traceback.format_exc())
-
     async def _send_handler(self):
         """处理发送队列中的消息"""
         logger.trace("[MessageProcessor] Send handler started")
@@ -540,7 +610,7 @@ class MessageProcessor:
                         try:
                             message_str = json.dumps(msg, ensure_ascii=False)
                             await self.websocket.send(message_str)
-                            logger.trace(f"[MessageProcessor] Message sent: {msg.get('action', 'unknown')}")  # type: ignore  # noqa: E501
+                            # logger.trace(f"[MessageProcessor] Message sent: {msg.get('action', 'unknown')}")  # type: ignore  # noqa: E501
                         except Exception as e:
                             logger.error(f"[MessageProcessor] Failed to send message: {str(e)}")
                             logger.error(traceback.format_exc())
@@ -557,6 +627,7 @@ class MessageProcessor:
 
         except asyncio.CancelledError:
             logger.debug("[MessageProcessor] Send handler cancelled")
+            raise
         except Exception as e:
             logger.error(f"[MessageProcessor] Fatal error in send handler: {str(e)}")
             logger.error(traceback.format_exc())
@@ -565,7 +636,7 @@ class MessageProcessor:
 
     async def _process_message(self, message_type: str, message_data: Dict[str, Any]):
         """处理收到的消息"""
-        logger.debug(f"[MessageProcessor] Processing message: {message_type}")
+        logger.trace(f"[MessageProcessor] Processing message: {message_type}")
 
         try:
             if message_type == "pong":
@@ -588,6 +659,10 @@ class MessageProcessor:
             # elif message_type == "session_id":
             #     self.session_id = message_data.get("session_id")
             #     logger.info(f"[MessageProcessor] Session ID: {self.session_id}")
+            elif message_type == "add_device":
+                await self._handle_device_manage(message_data, "add")
+            elif message_type == "remove_device":
+                await self._handle_device_manage(message_data, "remove")
             elif message_type == "request_restart":
                 await self._handle_request_restart(message_data)
             else:
@@ -603,6 +678,24 @@ class MessageProcessor:
         if host_node:
             host_node.handle_pong_response(pong_data)
 
+    def _check_action_always_free(self, device_id: str, action_name: str) -> bool:
+        """检查该action是否标记为always_free，通过HostNode统一的_action_value_mappings查找"""
+        try:
+            host_node = HostNode.get_instance(0)
+            if not host_node:
+                return False
+            # noinspection PyProtectedMember
+            action_mappings = host_node._action_value_mappings.get(device_id)
+            if not action_mappings:
+                return False
+            # 尝试直接匹配或 auto- 前缀匹配
+            for key in [action_name, f"auto-{action_name}"]:
+                if key in action_mappings:
+                    return action_mappings[key].get("always_free", False)
+            return False
+        except Exception:
+            return False
+
     async def _handle_query_action_state(self, data: Dict[str, Any]):
         """处理query_action_state消息"""
         device_id = data.get("device_id", "")
@@ -617,6 +710,9 @@ class MessageProcessor:
 
         device_action_key = f"/devices/{device_id}/{action_name}"
 
+        # 检查action是否为always_free
+        action_always_free = self._check_action_always_free(device_id, action_name)
+
         # 创建任务信息
         job_info = JobInfo(
             job_id=job_id,
@@ -626,6 +722,7 @@ class MessageProcessor:
             device_action_key=device_action_key,
             status=JobStatus.QUEUE,
             start_time=time.time(),
+            always_free=action_always_free,
         )
 
         # 添加到设备管理器
@@ -637,13 +734,13 @@ class MessageProcessor:
             await self._send_action_state_response(
                 device_id, action_name, task_id, job_id, "query_action_status", True, 0
             )
-            logger.info(f"[MessageProcessor] Job {job_log} can start immediately")
+            logger.trace(f"[MessageProcessor] Job {job_log} can start immediately")
         else:
             # 需要排队
             await self._send_action_state_response(
                 device_id, action_name, task_id, job_id, "query_action_status", False, 10
             )
-            logger.info(f"[MessageProcessor] Job {job_log} queued")
+            logger.trace(f"[MessageProcessor] Job {job_log} queued")
 
             # 通知QueueProcessor有新的队列更新
             if self.queue_processor:
@@ -652,6 +749,8 @@ class MessageProcessor:
     async def _handle_job_start(self, data: Dict[str, Any]):
         """处理job_start消息"""
         try:
+            if not data.get("sample_material"):
+                data["sample_material"] = {}
             req = JobAddReq(**data)
 
             job_log = format_job_log(req.job_id, req.task_id, req.device_id, req.action)
@@ -683,6 +782,7 @@ class MessageProcessor:
                 queue_item,
                 action_type=req.action_type,
                 action_kwargs=req.action_args,
+                sample_material=req.sample_material,
                 server_info=req.server_info,
             )
 
@@ -847,9 +947,7 @@ class MessageProcessor:
                         device_action_groups[key_add] = []
                     device_action_groups[key_add].append(item["uuid"])
 
-                    logger.info(
+                    logger.info(f"[资源同步] 跨站Transfer: {item['uuid'][:8]} from {device_old_id} to {device_id}")
-                        f"[资源同步] 跨站Transfer: {item['uuid'][:8]} from {device_old_id} to {device_id}"
-                    )
                 else:
                     # 正常update
                     key = (device_id, "update")
@@ -863,7 +961,9 @@ class MessageProcessor:
                     device_action_groups[key] = []
                 device_action_groups[key].append(item["uuid"])
 
-        logger.trace(f"[资源同步] 动作 {action} 分组数量: {len(device_action_groups)}, 总数量: {len(resource_uuid_list)}")
+        logger.trace(
+            f"[资源同步] 动作 {action} 分组数量: {len(device_action_groups)}, 总数量: {len(resource_uuid_list)}"
+        )
 
         # 为每个(device_id, action)创建独立的更新线程
         for (device_id, actual_action), items in device_action_groups.items():
@@ -899,6 +999,37 @@ class MessageProcessor:
             )
             thread.start()
 
+    async def _handle_device_manage(self, device_list: list[ResourceDictType], action: str):
+        """Handle add_device / remove_device from LabGo server."""
+        if not device_list:
+            return
+
+        for item in device_list:
+            target_node_id = item.get("target_node_id", "host_node")
+
+            def _notify(target_id: str, act: str, cfg: ResourceDictType):
+                try:
+                    host_node = HostNode.get_instance(timeout=5)
+                    if not host_node:
+                        logger.error(f"[DeviceManage] HostNode not available for {act}_device")
+                        return
+                    success = host_node.notify_device_manage(target_id, act, cfg)
+                    if success:
+                        logger.info(f"[DeviceManage] {act}_device completed on {target_id}")
+                    else:
+                        logger.warning(f"[DeviceManage] {act}_device failed on {target_id}")
+                except Exception as e:
+                    logger.error(f"[DeviceManage] Error in {act}_device: {e}")
+                    logger.error(traceback.format_exc())
+
+            thread = threading.Thread(
+                target=_notify,
+                args=(target_node_id, action, item),
+                daemon=True,
+                name=f"DeviceManage-{action}-{item.get('id', '')}",
+            )
+            thread.start()
+
     async def _handle_request_restart(self, data: Dict[str, Any]):
         """
         处理重启请求
@@ -910,14 +1041,13 @@ class MessageProcessor:
         logger.info(f"[MessageProcessor] Received restart request, reason: {reason}, delay: {delay}s")
 
         # 发送确认消息
-        if self.websocket_client:
+        self.send_message(
-            await self.websocket_client.send_message({
+            {"action": "restart_acknowledged", "data": {"reason": reason, "delay": delay}}
-                "action": "restart_acknowledged",
+        )
-                "data": {"reason": reason, "delay": delay}
-            })
 
         # 设置全局重启标志
         import unilabos.app.main as main_module
+
         main_module._restart_requested = True
         main_module._restart_reason = reason
 
@@ -927,10 +1057,12 @@ class MessageProcessor:
         # 在新线程中执行清理，避免阻塞当前事件循环
         def do_cleanup():
             import time
+
             time.sleep(0.5)  # 给当前消息处理完成的时间
             logger.info(f"[MessageProcessor] Starting cleanup for restart, reason: {reason}")
             try:
                 from unilabos.app.utils import cleanup_for_restart
+
                 if cleanup_for_restart():
                     logger.info("[MessageProcessor] Cleanup successful, main() will restart")
                 else:
@@ -1013,6 +1145,7 @@ class QueueProcessor:
     def stop(self) -> None:
         """停止队列处理线程"""
         self.is_running = False
+        self.queue_update_event.set()  # 立即唤醒等待中的线程
         if self.thread and self.thread.is_alive():
             self.thread.join(timeout=2)
         logger.info("[QueueProcessor] Stopped")
@@ -1113,6 +1246,11 @@ class QueueProcessor:
         logger.debug(f"[QueueProcessor] Sending busy status for {len(queued_jobs)} queued jobs")
 
         for job_info in queued_jobs:
+            # 快照可能已过期：在遍历过程中 end_job() 可能已将此 job 移至 READY，
+            # 此时不应再发送 busy/need_more，否则会覆盖已发出的 free=True 通知
+            if job_info.status != JobStatus.QUEUE:
+                continue
+
             message = {
                 "action": "report_action_state",
                 "data": {
@@ -1128,7 +1266,7 @@ class QueueProcessor:
             success = self.message_processor.send_message(message)
             job_log = format_job_log(job_info.job_id, job_info.task_id, job_info.device_id, job_info.action_name)
             if success:
-                logger.debug(f"[QueueProcessor] Sent busy/need_more for queued job {job_log}")
+                logger.trace(f"[QueueProcessor] Sent busy/need_more for queued job {job_log}")
             else:
                 logger.warning(f"[QueueProcessor] Failed to send busy status for job {job_log}")
 
@@ -1151,7 +1289,7 @@ class QueueProcessor:
             job_info.action_name,
         )
 
-        logger.info(f"[QueueProcessor] Job {job_log} completed with status: {status}")
+        logger.trace(f"[QueueProcessor] Job {job_log} completed with status: {status}")
 
         # 结束任务，获取下一个可执行的任务
         next_job = self.device_manager.end_job(job_id)
@@ -1171,8 +1309,8 @@ class QueueProcessor:
                 },
             }
             self.message_processor.send_message(message)
-            next_job_log = format_job_log(next_job.job_id, next_job.task_id, next_job.device_id, next_job.action_name)
+            # next_job_log = format_job_log(next_job.job_id, next_job.task_id, next_job.device_id, next_job.action_name)
-            logger.info(f"[QueueProcessor] Notified next job {next_job_log} can start")
+            # logger.debug(f"[QueueProcessor] Notified next job {next_job_log} can start")
 
             # 立即触发下一轮状态检查
             self.notify_queue_update()
@@ -1261,8 +1399,8 @@ class WebSocketClient(BaseCommunicationClient):
                 message = {"action": "normal_exit", "data": {"session_id": session_id}}
                 self.message_processor.send_message(message)
                 logger.info(f"[WebSocketClient] Sent normal_exit message with session_id: {session_id}")
-                # 给一点时间让消息发送出去
+                # send_handler 每100ms检查一次队列，等300ms足以让消息发出
-                time.sleep(1)
+                time.sleep(0.3)
             except Exception as e:
                 logger.warning(f"[WebSocketClient] Failed to send normal_exit message: {str(e)}")
 
@@ -1294,7 +1432,7 @@ class WebSocketClient(BaseCommunicationClient):
             },
         }
         self.message_processor.send_message(message)
-        logger.trace(f"[WebSocketClient] Device status published: {device_id}.{property_name}")
+        # logger.trace(f"[WebSocketClient] Device status published: {device_id}.{property_name}")
 
     def publish_job_status(
         self, feedback_data: dict, item: QueueItem, status: str, return_info: Optional[dict] = None
@@ -1314,7 +1452,7 @@ class WebSocketClient(BaseCommunicationClient):
                 except (KeyError, AttributeError):
                     logger.warning(f"[WebSocketClient] Failed to remove job {item.job_id} from HostNode status")
 
-            logger.info(f"[WebSocketClient] Intercepting final status for job_id: {item.job_id} - {status}")
+            # logger.debug(f"[WebSocketClient] Intercepting final status for job_id: {item.job_id} - {status}")
 
             # 通知队列处理器job完成（包括timeout的job）
             self.queue_processor.handle_job_completed(item.job_id, status)
@@ -1381,7 +1519,9 @@ class WebSocketClient(BaseCommunicationClient):
             if host_node:
                 # 获取设备信息
                 for device_id, namespace in host_node.devices_names.items():
-                    device_key = f"{namespace}/{device_id}" if namespace.startswith("/") else f"/{namespace}/{device_id}"
+                    device_key = (
+                        f"{namespace}/{device_id}" if namespace.startswith("/") else f"/{namespace}/{device_id}"
+                    )
                     is_online = device_key in host_node._online_devices
 
                     # 获取设备的动作信息
@@ -1395,14 +1535,16 @@ class WebSocketClient(BaseCommunicationClient):
                                 "action_type": str(type(client).__name__),
                             }
 
-                    devices.append({
+                    devices.append(
+                        {
                             "device_id": device_id,
                             "namespace": namespace,
                             "device_key": device_key,
                             "is_online": is_online,
                             "machine_name": host_node.device_machine_names.get(device_id, machine_name),
                             "actions": actions,
-                    })
+                        }
+                    )
 
                 logger.info(f"[WebSocketClient] Collected {len(devices)} devices for host_ready")
         except Exception as e:

unilabos/compile/pump_protocol.py

@@ -95,8 +95,29 @@ def get_vessel_liquid_volume(G: nx.DiGraph, vessel: str) -> float:
     return total_volume
 
 
-def is_integrated_pump(node_name):
+def is_integrated_pump(node_class: str, node_name: str = "") -> bool:
-    return "pump" in node_name and "valve" in node_name
+    """
+    判断是否为泵阀一体设备
+    """
+    class_lower = (node_class or "").lower()
+    name_lower = (node_name or "").lower()
+
+    if "pump" not in class_lower and "pump" not in name_lower:
+        return False
+
+    integrated_markers = [
+        "valve",
+        "pump_valve",
+        "pumpvalve",
+        "integrated",
+        "transfer_pump",
+    ]
+
+    for marker in integrated_markers:
+        if marker in class_lower or marker in name_lower:
+            return True
+
+    return False
 
 
 def find_connected_pump(G, valve_node):
@@ -186,7 +207,9 @@ def build_pump_valve_maps(G, pump_backbone):
     debug_print(f"🔧 过滤后的骨架: {filtered_backbone}")
 
     for node in filtered_backbone:
-        if is_integrated_pump(G.nodes[node]["class"]):
+        node_data = G.nodes.get(node, {})
+        node_class = node_data.get("class", "") or ""
+        if is_integrated_pump(node_class, node):
             pumps_from_node[node] = node
             valve_from_node[node] = node
             debug_print(f"  - 集成泵-阀: {node}")

unilabos/config/config.py

@@ -22,6 +22,9 @@ class BasicConfig:
     startup_json_path = None  # 填写绝对路径
     disable_browser = False  # 禁止浏览器自动打开
     port = 8002  # 本地HTTP服务
+    check_mode = False  # CI 检查模式，用于验证 registry 导入和文件一致性
+    test_mode = False  # 测试模式，所有动作不实际执行，返回模拟结果
+    extra_resource = False  # 是否加载lab_开头的额外资源
     # 'TRACE', 'DEBUG', 'INFO', 'WARNING', 'ERROR', 'CRITICAL'
     log_level: Literal["TRACE", "DEBUG", "INFO", "WARNING", "ERROR", "CRITICAL"] = "DEBUG"
 
@@ -38,7 +41,7 @@ class BasicConfig:
 class WSConfig:
     reconnect_interval = 5  # 重连间隔（秒）
     max_reconnect_attempts = 999  # 最大重连次数
-    ping_interval = 30  # ping间隔（秒）
+    ping_interval = 20  # ping间隔（秒）
 
 
 # HTTP配置
@@ -144,5 +147,5 @@ def load_config(config_path=None):
             traceback.print_exc()
             exit(1)
     else:
-        config_path = os.path.join(os.path.dirname(__file__), "local_config.py")
+        config_path = os.path.join(os.path.dirname(__file__), "example_config.py")
         load_config(config_path)

unilabos/device_comms/universal_driver.py

@@ -1,4 +1,3 @@
-
 from abc import abstractmethod
 from functools import wraps
 import inspect

unilabos/devices/liquid_handling/liquid_handler_abstract.py

@@ -21,13 +21,18 @@ from pylabrobot.resources import (
     ResourceHolder,
     Lid,
     Trash,
-    Tip,
+    Tip, TubeRack,
 )
 from typing_extensions import TypedDict
 
 from unilabos.devices.liquid_handling.rviz_backend import UniLiquidHandlerRvizBackend
 from unilabos.registry.placeholder_type import ResourceSlot
-from unilabos.resources.resource_tracker import ResourceTreeSet, ResourceDict
+from unilabos.resources.resource_tracker import (
+    ResourceTreeSet,
+    ResourceDict,
+    EXTRA_SAMPLE_UUID,
+    EXTRA_UNILABOS_SAMPLE_UUID,
+)
 from unilabos.ros.nodes.base_device_node import BaseROS2DeviceNode, ROS2DeviceNode
 
 
@@ -230,18 +235,12 @@ class LiquidHandlerMiddleware(LiquidHandler):
 
         res_samples = []
         res_volumes = []
-        # 处理 use_channels 为 None 的情况（通常用于单通道操作）
+        for resource, volume, channel in zip(resources, vols, use_channels):
-        if use_channels is None:
+            sample_uuid_value = resource.unilabos_extra.get(EXTRA_SAMPLE_UUID, None)
-            # 对于单通道操作，推断通道为 [0]
+            res_samples.append({"name": resource.name, EXTRA_SAMPLE_UUID: sample_uuid_value})
-            channels_to_use = [0] * len(resources)
-        else:
-            channels_to_use = use_channels
-
-        for resource, volume, channel in zip(resources, vols, channels_to_use):
-            res_samples.append({"name": resource.name, "sample_uuid": resource.unilabos_extra.get("sample_uuid", None)})
             res_volumes.append(volume)
             self.pending_liquids_dict[channel] = {
-                "sample_uuid": resource.unilabos_extra.get("sample_uuid", None),
+                EXTRA_SAMPLE_UUID: sample_uuid_value,
                 "volume": volume,
             }
         return SimpleReturn(samples=res_samples, volumes=res_volumes)
@@ -283,10 +282,10 @@ class LiquidHandlerMiddleware(LiquidHandler):
         res_samples = []
         res_volumes = []
         for resource, volume, channel in zip(resources, vols, use_channels):
-            res_uuid = self.pending_liquids_dict[channel]["sample_uuid"]
+            res_uuid = self.pending_liquids_dict[channel][EXTRA_SAMPLE_UUID]
             self.pending_liquids_dict[channel]["volume"] -= volume
-            resource.unilabos_extra["sample_uuid"] = res_uuid
+            resource.unilabos_extra[EXTRA_SAMPLE_UUID] = res_uuid
-            res_samples.append({"name": resource.name, "sample_uuid": res_uuid})
+            res_samples.append({"name": resource.name, EXTRA_SAMPLE_UUID: res_uuid})
             res_volumes.append(volume)
 
         return SimpleReturn(samples=res_samples, volumes=res_volumes)
@@ -691,18 +690,19 @@ class LiquidHandlerAbstract(LiquidHandlerMiddleware):
         )
 
     def set_liquid_from_plate(
-        self, plate: List[ResourceSlot], well_names: list[str], liquid_names: list[str], volumes: list[float]
+        self, plate: ResourceSlot, well_names: list[str], liquid_names: list[str], volumes: list[float]
     ) -> SetLiquidFromPlateReturn:
         """Set the liquid in wells of a plate by well names (e.g., A1, A2, B3).
 
         如果 liquid_names 和 volumes 为空，但 plate 和 well_names 不为空，直接返回 plate 和 wells。
         """
-        if isinstance(plate, list):  # 未来移除
+        assert issubclass(plate.__class__, Plate) or issubclass(plate.__class__, TubeRack) , f"plate must be a Plate, now: {type(plate)}"
-            plate = plate[0]
+        plate: Union[Plate, TubeRack]
-        assert issubclass(plate.__class__, Plate), "plate must be a Plate"
-        plate: Plate = cast(Plate, plate)
         # 根据 well_names 获取对应的 Well 对象
+        if issubclass(plate.__class__, Plate):
             wells = [plate.get_well(name) for name in well_names]
+        elif issubclass(plate.__class__, TubeRack):
+            wells = [plate.get_tube(name) for name in well_names]
         res_volumes = []
 
         # 如果 liquid_names 和 volumes 都为空，直接返回
@@ -1191,9 +1191,6 @@ class LiquidHandlerAbstract(LiquidHandlerMiddleware):
         if mix_times is not None:
             mix_times = int(mix_times)
 
-        # 设置tip racks
-        self.set_tiprack(tip_racks)
-
         # 识别传输模式（mix_times 为 None 也应该能正常移液，只是不做 mix）
         num_sources = len(sources)
         num_targets = len(targets)
@@ -1303,14 +1300,8 @@ class LiquidHandlerAbstract(LiquidHandlerMiddleware):
         """一对一传输模式：N sources -> N targets"""
         # 验证参数长度
         if len(asp_vols) != len(targets):
-            if len(asp_vols) == 1:
-                asp_vols = [asp_vols[0]] * len(targets)
-            else:
             raise ValueError(f"Length of `asp_vols` {len(asp_vols)} must match `targets` {len(targets)}.")
         if len(dis_vols) != len(targets):
-            if len(dis_vols) == 1:
-                dis_vols = [dis_vols[0]] * len(targets)
-            else:
             raise ValueError(f"Length of `dis_vols` {len(dis_vols)} must match `targets` {len(targets)}.")
         if len(sources) != len(targets):
             raise ValueError(f"Length of `sources` {len(sources)} must match `targets` {len(targets)}.")
@@ -1330,7 +1321,6 @@ class LiquidHandlerAbstract(LiquidHandlerMiddleware):
                         offsets=offsets if offsets else None,
                         height_to_bottom=mix_liquid_height if mix_liquid_height else None,
                         mix_rate=mix_rate if mix_rate else None,
-                        use_channels=use_channels,
                     )
 
                 await self.aspirate(
@@ -1369,7 +1359,6 @@ class LiquidHandlerAbstract(LiquidHandlerMiddleware):
                         offsets=offsets if offsets else None,
                         height_to_bottom=mix_liquid_height if mix_liquid_height else None,
                         mix_rate=mix_rate if mix_rate else None,
-                        use_channels=use_channels,
                     )
                 if delays is not None and len(delays) > 1:
                     await self.custom_delay(seconds=delays[1])
@@ -1406,7 +1395,6 @@ class LiquidHandlerAbstract(LiquidHandlerMiddleware):
                         offsets=offsets if offsets else None,
                         height_to_bottom=mix_liquid_height if mix_liquid_height else None,
                         mix_rate=mix_rate if mix_rate else None,
-                        use_channels=use_channels,
                     )
 
                 await self.aspirate(
@@ -1443,7 +1431,6 @@ class LiquidHandlerAbstract(LiquidHandlerMiddleware):
                         offsets=offsets if offsets else None,
                         height_to_bottom=mix_liquid_height if mix_liquid_height else None,
                         mix_rate=mix_rate if mix_rate else None,
-                        use_channels=use_channels,
                     )
                 if delays is not None and len(delays) > 1:
                     await self.custom_delay(seconds=delays[1])
@@ -1500,7 +1487,6 @@ class LiquidHandlerAbstract(LiquidHandlerMiddleware):
                         offsets=offsets[idx : idx + 1] if offsets and len(offsets) > idx else None,
                         height_to_bottom=mix_liquid_height if mix_liquid_height else None,
                         mix_rate=mix_rate if mix_rate else None,
-                        use_channels=use_channels,
                     )
 
             # 从源容器吸液（总体积）
@@ -1544,7 +1530,6 @@ class LiquidHandlerAbstract(LiquidHandlerMiddleware):
                         offsets=offsets[idx : idx + 1] if offsets else None,
                         height_to_bottom=mix_liquid_height if mix_liquid_height else None,
                         mix_rate=mix_rate if mix_rate else None,
-                        use_channels=use_channels,
                     )
                 if touch_tip:
                     await self.touch_tip([target])
@@ -1588,7 +1573,6 @@ class LiquidHandlerAbstract(LiquidHandlerMiddleware):
                         offsets=offsets[i : i + 8] if offsets else None,
                         height_to_bottom=mix_liquid_height if mix_liquid_height else None,
                         mix_rate=mix_rate if mix_rate else None,
-                        use_channels=use_channels,
                     )
 
                 # 从源容器吸液（8个通道都从同一个源，但每个通道的吸液体积不同）
@@ -1634,7 +1618,6 @@ class LiquidHandlerAbstract(LiquidHandlerMiddleware):
                         offsets=offsets if offsets else None,
                         height_to_bottom=mix_liquid_height if mix_liquid_height else None,
                         mix_rate=mix_rate if mix_rate else None,
-                        use_channels=use_channels,
                     )
 
                 if touch_tip:
@@ -1667,9 +1650,6 @@ class LiquidHandlerAbstract(LiquidHandlerMiddleware):
         """多对一传输模式：N sources -> 1 target（汇总/混合）"""
         # 验证和扩展体积参数
         if len(asp_vols) != len(sources):
-            if len(asp_vols) == 1:
-                asp_vols = [asp_vols[0]] * len(sources)
-            else:
             raise ValueError(f"Length of `asp_vols` {len(asp_vols)} must match `sources` {len(sources)}.")
 
         # 支持两种模式：
@@ -1689,19 +1669,10 @@ class LiquidHandlerAbstract(LiquidHandlerMiddleware):
                 f"(matching `asp_vols`). Got length {len(dis_vols)}."
             )
 
-        need_mix_after = mix_stage in ["after", "both"] and mix_times is not None and mix_times > 0
-        defer_final_discard = need_mix_after or touch_tip
-
         if len(use_channels) == 1:
             # 单通道模式：多次吸液，一次分液
-
+            # 先混合前（如果需要）
-            # 如果需要 before mix，先 pick up tip 并执行 mix
             if mix_stage in ["before", "both"] and mix_times is not None and mix_times > 0:
-                tip = []
-                for _ in range(len(use_channels)):
-                    tip.extend(next(self.current_tip))
-                await self.pick_up_tips(tip)
-
                 await self.mix(
                     targets=[target],
                     mix_time=mix_times,
@@ -1709,11 +1680,8 @@ class LiquidHandlerAbstract(LiquidHandlerMiddleware):
                     offsets=offsets[0:1] if offsets else None,
                     height_to_bottom=mix_liquid_height if mix_liquid_height else None,
                     mix_rate=mix_rate if mix_rate else None,
-                    use_channels=use_channels,
                 )
 
-                await self.discard_tips(use_channels=use_channels)
-
             # 从每个源容器吸液并分液到目标容器
             for idx, source in enumerate(sources):
                 tip = []
@@ -1771,11 +1739,10 @@ class LiquidHandlerAbstract(LiquidHandlerMiddleware):
                 if delays is not None and len(delays) > 1:
                     await self.custom_delay(seconds=delays[1])
 
-                if not (defer_final_discard and idx == len(sources) - 1):
                 await self.discard_tips(use_channels=use_channels)
 
             # 最后在目标容器中混合（如果需要）
-            if need_mix_after:
+            if mix_stage in ["after", "both"] and mix_times is not None and mix_times > 0:
                 await self.mix(
                     targets=[target],
                     mix_time=mix_times,
@@ -1783,15 +1750,11 @@ class LiquidHandlerAbstract(LiquidHandlerMiddleware):
                     offsets=offsets[0:1] if offsets else None,
                     height_to_bottom=mix_liquid_height if mix_liquid_height else None,
                     mix_rate=mix_rate if mix_rate else None,
-                    use_channels=use_channels,
                 )
 
             if touch_tip:
                 await self.touch_tip([target])
 
-            if defer_final_discard:
-                await self.discard_tips(use_channels=use_channels)
-        
         elif len(use_channels) == 8:
             # 8通道模式：需要确保源数量是8的倍数
             if len(sources) % 8 != 0:
@@ -1799,11 +1762,6 @@ class LiquidHandlerAbstract(LiquidHandlerMiddleware):
 
             # 每次处理8个源
             if mix_stage in ["before", "both"] and mix_times is not None and mix_times > 0:
-                tip = []
-                for _ in range(len(use_channels)):
-                    tip.extend(next(self.current_tip))
-                await self.pick_up_tips(tip)
-
                 await self.mix(
                     targets=[target],
                     mix_time=mix_times,
@@ -1811,11 +1769,8 @@ class LiquidHandlerAbstract(LiquidHandlerMiddleware):
                     offsets=offsets[0:1] if offsets else None,
                     height_to_bottom=mix_liquid_height if mix_liquid_height else None,
                     mix_rate=mix_rate if mix_rate else None,
-                    use_channels=use_channels,
                 )
 
-                await self.discard_tips([0,1,2,3,4,5,6,7])
-
             for i in range(0, len(sources), 8):
                 tip = []
                 for _ in range(len(use_channels)):
@@ -1878,11 +1833,10 @@ class LiquidHandlerAbstract(LiquidHandlerMiddleware):
                 if delays is not None and len(delays) > 1:
                     await self.custom_delay(seconds=delays[1])
 
-                if not (defer_final_discard and i + 8 >= len(sources)):
+                await self.discard_tips([0, 1, 2, 3, 4, 5, 6, 7])
-                    await self.discard_tips([0,1,2,3,4,5,6,7])
 
             # 最后在目标容器中混合（如果需要）
-            if need_mix_after:
+            if mix_stage in ["after", "both"] and mix_times is not None and mix_times > 0:
                 await self.mix(
                     targets=[target],
                     mix_time=mix_times,
@@ -1890,15 +1844,11 @@ class LiquidHandlerAbstract(LiquidHandlerMiddleware):
                     offsets=offsets[0:1] if offsets else None,
                     height_to_bottom=mix_liquid_height if mix_liquid_height else None,
                     mix_rate=mix_rate if mix_rate else None,
-                    use_channels=use_channels,
                 )
 
             if touch_tip:
                 await self.touch_tip([target])
 
-            if defer_final_discard:
-                await self.discard_tips([0,1,2,3,4,5,6,7])
-
     # except Exception as e:
     #     traceback.print_exc()
     #     raise RuntimeError(f"Liquid addition failed: {e}") from e
@@ -1917,12 +1867,7 @@ class LiquidHandlerAbstract(LiquidHandlerMiddleware):
                 print(f"Waiting time: {msg}")
                 print(f"Current time: {time.strftime('%H:%M:%S')}")
                 print(f"Time to finish: {time.strftime('%H:%M:%S', time.localtime(time.time() + seconds))}")
-            # Use ROS node sleep if available, otherwise use asyncio.sleep
-            if hasattr(self, '_ros_node') and self._ros_node is not None:
             await self._ros_node.sleep(seconds)
-            else:
-                import asyncio
-                await asyncio.sleep(seconds)
             if msg:
                 print(f"Done: {msg}")
                 print(f"Current time: {time.strftime('%H:%M:%S')}")
@@ -1960,58 +1905,26 @@ class LiquidHandlerAbstract(LiquidHandlerMiddleware):
         height_to_bottom: Optional[float] = None,
         offsets: Optional[Coordinate] = None,
         mix_rate: Optional[float] = None,
-        use_channels: Optional[List[int]] = None,
         none_keys: List[str] = [],
     ):
-        if mix_time is None or mix_time <= 0:  # No mixing required
+        if mix_time is None:  # No mixing required
             return
         """Mix the liquid in the target wells."""
-        if mix_vol is None:
-            raise ValueError("`mix_vol` must be provided when `mix_time` is set.")
-
-        targets_list: List[Container] = list(targets)
-        if len(targets_list) == 0:
-            return
-
-        def _expand(value, count: int):
-            if value is None:
-                return [None] * count
-            if isinstance(value, (list, tuple)):
-                if len(value) != count:
-                    raise ValueError("Length of per-target parameters must match targets.")
-                return list(value)
-            return [value] * count
-
-        offsets_list = _expand(offsets, len(targets_list))
-        heights_list = _expand(height_to_bottom, len(targets_list))
-        rates_list = _expand(mix_rate, len(targets_list))
-
         for _ in range(mix_time):
-            for idx, target in enumerate(targets_list):
-                offset_arg = (
-                    [offsets_list[idx]] if offsets_list[idx] is not None else None
-                )
-                height_arg = (
-                    [heights_list[idx]] if heights_list[idx] is not None else None
-                )
-                rate_arg = [rates_list[idx]] if rates_list[idx] is not None else None
-
             await self.aspirate(
-                    resources=[target],
+                resources=[targets],
                 vols=[mix_vol],
-                    use_channels=use_channels,
+                flow_rates=[mix_rate] if mix_rate else None,
-                    flow_rates=rate_arg,
+                offsets=[offsets] if offsets else None,
-                    offsets=offset_arg,
+                liquid_height=[height_to_bottom] if height_to_bottom else None,
-                    liquid_height=height_arg,
             )
             await self.custom_delay(seconds=1)
             await self.dispense(
-                    resources=[target],
+                resources=[targets],
                 vols=[mix_vol],
-                    use_channels=use_channels,
+                flow_rates=[mix_rate] if mix_rate else None,
-                    flow_rates=rate_arg,
+                offsets=[offsets] if offsets else None,
-                    offsets=offset_arg,
+                liquid_height=[height_to_bottom] if height_to_bottom else None,
-                    liquid_height=height_arg,
             )
 
     def iter_tips(self, tip_racks: Sequence[TipRack]) -> Iterator[Resource]:

unilabos/devices/liquid_handling/prcxi/prcxi.py

@@ -55,6 +55,7 @@ from unilabos.devices.liquid_handling.liquid_handler_abstract import (
     TransferLiquidReturn,
 )
 from unilabos.registry.placeholder_type import ResourceSlot
+from unilabos.resources.resource_tracker import ResourceTreeSet
 from unilabos.ros.nodes.base_device_node import BaseROS2DeviceNode
 
 
@@ -90,23 +91,103 @@ class PRCXI9300Deck(Deck):
     该类定义了 PRCXI 9300 的工作台布局和槽位信息。
     """
 
-    def __init__(self, name: str, size_x: float, size_y: float, size_z: float, **kwargs):
+    # T1-T16 默认位置 (4列×4行)
-        super().__init__(name, size_x, size_y, size_z)
+    _DEFAULT_SITE_POSITIONS = [
-        self.slots = [None] * 16  # PRCXI 9300/9320 最大有 16 个槽位
+        (0, 0, 0), (138, 0, 0), (276, 0, 0), (414, 0, 0),         # T1-T4
-        self.slot_locations = []
+        (0, 96, 0), (138, 96, 0), (276, 96, 0), (414, 96, 0),     # T5-T8
+        (0, 192, 0), (138, 192, 0), (276, 192, 0), (414, 192, 0), # T9-T12
+        (0, 288, 0), (138, 288, 0), (276, 288, 0), (414, 288, 0), # T13-T16
+    ]
+    _DEFAULT_SITE_SIZE = {"width": 128.0, "height": 86, "depth": 0}
+    _DEFAULT_CONTENT_TYPE = ["plate", "tip_rack", "plates", "tip_racks", "tube_rack", "adaptor"]
 
-        for i in range(0, 16):
+    def __init__(self, name: str, size_x: float, size_y: float, size_z: float,
-            self.slot_locations.append(Coordinate((i%4)*137.5+5, (3-int(i/4))*96+13, 0))
+                 sites: Optional[List[Dict[str, Any]]] = None, **kwargs):
+        super().__init__(size_x, size_y, size_z, name)
+        if sites is not None:
+            self.sites: List[Dict[str, Any]] = [dict(s) for s in sites]
+        else:
+            self.sites = []
+            for i, (x, y, z) in enumerate(self._DEFAULT_SITE_POSITIONS):
+                self.sites.append({
+                    "label": f"T{i + 1}",
+                    "visible": True,
+                    "position": {"x": x, "y": y, "z": z},
+                    "size": dict(self._DEFAULT_SITE_SIZE),
+                    "content_type": list(self._DEFAULT_CONTENT_TYPE),
+                })
+        # _ordering: label -> None, 用于外部通过 list(keys()).index(site) 将 Tn 转换为 spot index
+        self._ordering = collections.OrderedDict(
+            (site["label"], None) for site in self.sites
+        )
+
+    def _get_site_location(self, idx: int) -> Coordinate:
+        pos = self.sites[idx]["position"]
+        return Coordinate(pos["x"], pos["y"], pos["z"])
+
+    def _get_site_resource(self, idx: int) -> Optional[Resource]:
+        site_loc = self._get_site_location(idx)
+        for child in self.children:
+            if child.location == site_loc:
+                return child
+        return None
+
+    def assign_child_resource(
+        self,
+        resource: Resource,
+        location: Optional[Coordinate] = None,
+        reassign: bool = True,
+        spot: Optional[int] = None,
+    ):
+        idx = spot
+        if spot is not None:
+            idx = spot
+        else:
+            for i, site in enumerate(self.sites):
+                site_loc = self._get_site_location(i)
+                if site.get("label") == resource.name:
+                    idx = i
+                    break
+                if location is not None and site_loc == location:
+                    idx = i
+                    break
+
+        if idx is None:
+            for i in range(len(self.sites)):
+                if self._get_site_resource(i) is None:
+                    idx = i
+                    break
+
+        if idx is None:
+            raise ValueError(f"No available site on deck '{self.name}' for resource '{resource.name}'")
+
+        if not reassign and self._get_site_resource(idx) is not None:
+            raise ValueError(f"Site {idx} ('{self.sites[idx]['label']}') is already occupied")
+
+        loc = self._get_site_location(idx)
+        super().assign_child_resource(resource, location=loc, reassign=reassign)
 
     def assign_child_at_slot(self, resource: Resource, slot: int, reassign: bool = False) -> None:
-        if self.slots[slot - 1] is not None and not reassign:
+        self.assign_child_resource(resource, spot=slot - 1, reassign=reassign)
-            raise ValueError(f"Spot {slot} is already occupied")
 
-        self.slots[slot - 1] = resource
+    def serialize(self) -> dict:
-        super().assign_child_resource(resource, location=self.slot_locations[slot - 1])
+        data = super().serialize()
+        sites_out = []
+        for i, site in enumerate(self.sites):
+            occupied = self._get_site_resource(i)
+            sites_out.append({
+                "label": site["label"],
+                "visible": site.get("visible", True),
+                "occupied_by": occupied.name if occupied is not None else None,
+                "position": site["position"],
+                "size": site["size"],
+                "content_type": site["content_type"],
+            })
+        data["sites"] = sites_out
+        return data
 
 
-class PRCXI9300Container(Plate):
+class PRCXI9300Container(Container):
     """PRCXI 9300 的专用 Container 类，继承自 Plate，用于槽位定位和未知模块。
 
     该类定义了 PRCXI 9300 的工作台布局和槽位信息。
@@ -119,11 +200,10 @@ class PRCXI9300Container(Plate):
         size_y: float,
         size_z: float,
         category: str,
-        ordering: collections.OrderedDict,
         model: Optional[str] = None,
         **kwargs,
     ):
-        super().__init__(name, size_x, size_y, size_z, category=category, ordering=ordering, model=model)
+        super().__init__(name, size_x, size_y, size_z, category=category, model=model)
         self._unilabos_state = {}
 
     def load_state(self, state: Dict[str, Any]) -> None:
@@ -178,30 +258,9 @@ class PRCXI9300Plate(Plate):
                 elif value is None:
                     ordering_param = ordering
             else:
-                # ordering 的值是对象（可能是 Well 对象），检查是否有有效的 location
+                # ordering 的值已经是对象，可以直接使用
-                # 如果是反序列化过程，Well 对象可能没有正确的 location，需要让 Plate 重新创建
-                sample_value = next(iter(ordering.values()), None)
-                if sample_value is not None and hasattr(sample_value, 'location'):
-                    # 如果是 Well 对象但 location 为 None，说明是反序列化过程
-                    # 让 Plate 自己创建 Well 对象
-                    if sample_value.location is None:
-                        items = None
-                        ordering_param = collections.OrderedDict((k, None) for k in ordering.keys())
-                    else:
-                        # Well 对象有有效的 location，可以直接使用
                 items = ordering
                 ordering_param = None
-                elif sample_value is None:
-                    # ordering 的值都是 None，让 Plate 自己创建 Well 对象
-                    items = None
-                    ordering_param = collections.OrderedDict((k, None) for k in ordering.keys())
-                else:
-                    # 其他情况，直接使用
-                    items = ordering
-                    ordering_param = None
-        else:
-            items = None
-            ordering_param = collections.OrderedDict()  # 提供空的 ordering
 
         # 根据情况传递不同的参数
         if items is not None:
@@ -272,26 +331,20 @@ class PRCXI9300TipRack(TipRack):
         if ordered_items is not None:
             items = ordered_items
         elif ordering is not None:
-            # 检查 ordering 中的值是否是字符串（从 JSON 反序列化时的情况）
+            # 检查 ordering 中的值类型来决定如何处理：
-            # 如果是字符串，说明这是位置名称，需要让 TipRack 自己创建 Tip 对象
+            # - 字符串值（从 JSON 反序列化）: 只用键创建 ordering_param
-            # 我们只传递位置信息（键），不传递值，使用 ordering 参数
+            # - None 值（从第二次往返序列化）: 同样只用键创建 ordering_param
-            if ordering and isinstance(next(iter(ordering.values()), None), str):
+            # - 对象值（已经是实际的 Resource 对象）: 直接作为 ordered_items 使用
-                # ordering 的值是字符串，只使用键（位置信息）创建新的 OrderedDict
+            first_val = next(iter(ordering.values()), None) if ordering else None
+            if not ordering or first_val is None or isinstance(first_val, str):
+                # ordering 的值是字符串或 None，只使用键（位置信息）创建新的 OrderedDict
                 # 传递 ordering 参数而不是 ordered_items，让 TipRack 自己创建 Tip 对象
                 items = None
-                # 使用 ordering 参数，只包含位置信息（键）
                 ordering_param = collections.OrderedDict((k, None) for k in ordering.keys())
             else:
-                # ordering 的值已经是对象，需要过滤掉 None 值
+                # ordering 的值已经是对象，可以直接使用
-                # 只保留有效的对象，用于 ordered_items 参数
+                items = ordering
-                valid_items = {k: v for k, v in ordering.items() if v is not None}
-                if valid_items:
-                    items = valid_items
                 ordering_param = None
-                else:
-                    # 如果没有有效对象，使用 ordering 参数
-                    items = None
-                    ordering_param = collections.OrderedDict((k, None) for k in ordering.keys())
         else:
             items = None
             ordering_param = None
@@ -350,10 +403,16 @@ class PRCXI9300Trash(Trash):
     该类定义了 PRCXI 9300 的工作台布局和槽位信息。
     """
 
-    def __init__(self, name: str, size_x: float, size_y: float, size_z: float, 
+    def __init__(
-                 category: str = "plate", 
+        self,
+        name: str,
+        size_x: float,
+        size_y: float,
+        size_z: float,
+        category: str = "trash",
         material_info: Optional[Dict[str, Any]] = None,
-                 **kwargs):
+        **kwargs,
+    ):
 
         if name != "trash":
             print(f"Warning: PRCXI9300Trash usually expects name='trash' for backend logic, but got '{name}'.")
@@ -422,24 +481,19 @@ class PRCXI9300TubeRack(TubeRack):
             items_to_pass = ordered_items
             ordering_param = None
         elif ordering is not None:
-            # 检查 ordering 中的值是否是字符串（从 JSON 反序列化时的情况）
+            # 检查 ordering 中的值类型来决定如何处理：
-            if ordering and isinstance(next(iter(ordering.values()), None), str):
+            # - 字符串值（从 JSON 反序列化）: 只用键创建 ordering_param
-                # ordering 的值是字符串，这种情况下我们让 TubeRack 使用默认行为
+            # - None 值（从第二次往返序列化）: 同样只用键创建 ordering_param
-                # 不在初始化时创建 items，而是在 deserialize 后处理
+            # - 对象值（已经是实际的 Resource 对象）: 直接作为 ordered_items 使用
+            first_val = next(iter(ordering.values()), None) if ordering else None
+            if not ordering or first_val is None or isinstance(first_val, str):
+                # ordering 的值是字符串或 None，只使用键（位置信息）创建新的 OrderedDict
+                # 传递 ordering 参数而不是 ordered_items，让 TubeRack 自己创建 Tube 对象
                 items_to_pass = None
-                ordering_param = collections.OrderedDict((k, None) for k in ordering.keys())  # 提供空的 ordering 来满足要求
+                ordering_param = collections.OrderedDict((k, None) for k in ordering.keys())
-                # 保存 ordering 信息以便后续处理
-                self._temp_ordering = ordering
             else:
-                # ordering 的值已经是对象，需要过滤掉 None 值
+                # ordering 的值已经是对象，可以直接使用
-                # 只保留有效的对象，用于 ordered_items 参数
+                items_to_pass = ordering
-                valid_items = {k: v for k, v in ordering.items() if v is not None}
-                if valid_items:
-                    items_to_pass = valid_items
-                    ordering_param = None
-                else:
-                    # 如果没有有效对象，创建空的 ordered_items
-                    items_to_pass = {}
                 ordering_param = None
         elif items is not None:
             # 兼容旧的 items 参数
@@ -462,29 +516,6 @@ class PRCXI9300TubeRack(TubeRack):
         if material_info:
             self._unilabos_state["Material"] = material_info
 
-        # 如果有临时 ordering 信息，在初始化完成后处理
-        if hasattr(self, '_temp_ordering') and self._temp_ordering:
-            self._process_temp_ordering()
-
-    def _process_temp_ordering(self):
-        """处理临时的 ordering 信息，创建相应的 Tube 对象"""
-        from pylabrobot.resources import Tube, Coordinate
-
-        for location, item_type in self._temp_ordering.items():
-            if item_type == 'Tube' or item_type == 'tube':
-                # 为每个位置创建 Tube 对象
-                tube = Tube(name=f"{self.name}_{location}", size_x=10, size_y=10, size_z=50, max_volume=2000.0)
-                # 使用 assign_child_resource 添加到 rack 中
-                self.assign_child_resource(tube, location=Coordinate(0, 0, 0))
-
-        # 清理临时数据
-        del self._temp_ordering
-
-    def load_state(self, state: Dict[str, Any]) -> None:
-        """从给定的状态加载工作台信息。"""
-        # super().load_state(state)
-        self._unilabos_state = state
-
     def serialize_state(self) -> Dict[str, Dict[str, Any]]:
         try:
             data = super().serialize_state()
@@ -511,97 +542,6 @@ class PRCXI9300TubeRack(TubeRack):
 
             data.update(safe_state)
         return data
-class PRCXI9300PlateAdapterSite(ItemizedCarrier):
-    def __init__(self, name: str, size_x: float, size_y: float, size_z: float,
-                 material_info: Optional[Dict[str, Any]] = None, **kwargs):
-        # 处理 sites 参数的不同格式
-
-        sites = create_homogeneous_resources(
-        klass=ResourceHolder,
-        locations=[Coordinate(0, 0, 0)],
-        resource_size_x=size_x,
-        resource_size_y=size_y,
-        resource_size_z=size_z,
-        name_prefix=name,
-        )[0]
-        
-        # 确保不传递重复的参数
-        kwargs.pop('layout', None)
-        sites_in = kwargs.pop('sites', None)
-
-        # 创建默认的sites字典
-        sites_dict = {name: sites}
-        # 优先从 sites_in 读取 'content_type'，否则使用默认值
-
-        content_type = [
-              "plate",
-              "tip_rack",
-              "plates",
-              "tip_racks",
-              "tube_rack"
-            ]
-        # 如果提供了sites参数，则用sites_in中的值替换sites_dict中对应的元素
-        if sites_in is not None and isinstance(sites_in, dict):
-            for site_key, site_value in sites_in.items():
-                if site_key in sites_dict:
-                    sites_dict[site_key] = site_value
-        
-        super().__init__(name, size_x, size_y, size_z,
-        sites=sites_dict,
-        num_items_x=kwargs.pop('num_items_x', 1),
-        num_items_y=kwargs.pop('num_items_y', 1),
-        num_items_z=kwargs.pop('num_items_z', 1),
-        content_type=content_type,
-        **kwargs)
-        self._unilabos_state = {}
-        if material_info:
-            self._unilabos_state["Material"] = material_info
-
-
-    def assign_child_resource(self, resource, location=Coordinate(0, 0, 0), reassign=True, spot=None):
-        """重写 assign_child_resource 方法，对于适配器位置，不使用索引分配"""
-        # 直接调用 Resource 的 assign_child_resource，避免 ItemizedCarrier 的索引逻辑
-        from pylabrobot.resources.resource import Resource
-        Resource.assign_child_resource(self, resource, location=location, reassign=reassign)
-
-    def unassign_child_resource(self, resource):
-        """重写 unassign_child_resource 方法，对于适配器位置，不使用 sites 列表"""
-        # 直接调用 Resource 的 unassign_child_resource，避免 ItemizedCarrier 的 sites 逻辑
-        from pylabrobot.resources.resource import Resource
-        Resource.unassign_child_resource(self, resource)
-
-    def serialize_state(self) -> Dict[str, Dict[str, Any]]:
-        try:
-            data = super().serialize_state()
-        except AttributeError:
-            data = {}
-
-        # 包含 sites 配置信息，但避免序列化 ResourceHolder 对象
-        if hasattr(self, 'sites') and self.sites:
-            # 只保存 sites 的基本信息，不保存 ResourceHolder 对象本身
-            sites_info = []
-            for site in self.sites:
-                if hasattr(site, '__class__') and 'pylabrobot' in str(site.__class__.__module__):
-                    # 对于 pylabrobot 对象，只保存基本信息
-                    sites_info.append({
-                        "__pylabrobot_object__": True,
-                        "class": site.__class__.__name__,
-                        "module": site.__class__.__module__,
-                        "name": getattr(site, 'name', str(site))
-                    })
-                else:
-                    sites_info.append(site)
-            data['sites'] = sites_info
-
-        return data
-
-    def load_state(self, state: Dict[str, Any]) -> None:
-        """加载状态，包括 sites 配置信息"""
-        super().load_state(state)
-
-        # 从状态中恢复 sites 配置信息
-        if 'sites' in state:
-            self.sites = [state['sites']]
 
 
 class PRCXI9300PlateAdapter(PlateAdapter):
@@ -694,7 +634,7 @@ class PRCXI9300Handler(LiquidHandlerAbstract):
 
     def __init__(
         self,
-        deck: Deck,
+        deck: PRCXI9300Deck,
         host: str,
         port: int,
         timeout: float,
@@ -706,51 +646,18 @@ class PRCXI9300Handler(LiquidHandlerAbstract):
         step_mode=False,
         matrix_id="",
         is_9320=False,
-        start_rail=2,
-        rail_nums=4,
-        rail_interval=0,
-        x_increase = -0.003636,
-        y_increase = -0.003636,
-        x_offset = -0.8,
-        y_offset = -37.98,
-        deck_z = 300,
-        deck_y = 400,
-        rail_width=27.5,
-        xy_coupling = -0.0045,
     ):
-
+        tablets_info = []
-        self.deck_x = (start_rail + rail_nums*5 + (rail_nums-1)*rail_interval) * rail_width
+        for site_id in range(len(deck.sites)):
-        self.deck_y = deck_y
+            child = deck._get_site_resource(site_id)
-        self.deck_z = deck_z
+            # 如果放其他类型的物料，是不可以的
-        self.x_increase = x_increase
+            if hasattr(child, "_unilabos_state") and "Material" in child._unilabos_state:
-        self.y_increase = y_increase
+                number = site_id + 1
-        self.x_offset = x_offset
+                tablets_info.append(
-        self.y_offset = y_offset
+                    WorkTablets(
-        self.xy_coupling = xy_coupling
+                        Number=number, Code=f"T{number}", Material=child._unilabos_state["Material"]
-
+                    )
-        tablets_info = {}
-        plate_positions = []
-        for child in deck.children:
-            number = int(child.name.replace("T", ""))
-
-            if child.children:
-                if "Material" in child.children[0]._unilabos_state:
-                    tablets_info[number] = child.children[0]._unilabos_state["Material"].get("uuid", "730067cf07ae43849ddf4034299030e9")
-                else:
-                    tablets_info[number] = "730067cf07ae43849ddf4034299030e9"
-            else:
-                tablets_info[number] = "730067cf07ae43849ddf4034299030e9"
-            pos = self.plr_pos_to_prcxi(child)
-            plate_positions.append(
-                {
-                    "Number": number,
-                    "XPos": pos.x,
-                    "YPos": pos.y,
-                    "ZPos": pos.z
-                }
                 )
-
-        
         if is_9320:
             print("当前设备是9320")
         # 始终初始化 step_mode 属性
@@ -760,39 +667,11 @@ class PRCXI9300Handler(LiquidHandlerAbstract):
                 self.step_mode = step_mode
             else:
                 print("9300设备不支持 单点动作模式")
-        
         self._unilabos_backend = PRCXI9300Backend(
-            tablets_info, plate_positions, host, port, timeout, channel_num, axis, setup, debug, matrix_id, is_9320,
+            tablets_info, host, port, timeout, channel_num, axis, setup, debug, matrix_id, is_9320
-            x_increase, y_increase, x_offset, y_offset, 
-            deck_z, deck_x=self.deck_x, deck_y=self.deck_y, xy_coupling=xy_coupling
         )
-
         super().__init__(backend=self._unilabos_backend, deck=deck, simulator=simulator, channel_num=channel_num)
 
-    def plr_pos_to_prcxi(self, resource: Resource):
-        resource_pos = resource.get_absolute_location(x="c",y="c",z="t")
-        x = resource_pos.x 
-        y = resource_pos.y 
-        z = resource_pos.z
-        # 如果z等于0，则递归resource.parent的高度并向z加，使用get_size_z方法
-
-        parent = resource.parent
-        res_z = resource.location.z
-        while not isinstance(parent, LiquidHandlerAbstract) and (res_z == 0) and parent is not None:
-            z += parent.get_size_z()
-            res_z = parent.location.z
-            parent = getattr(parent, "parent", None)
-        
-        prcxi_x = (self.deck_x - x)*(1+self.x_increase) + self.x_offset + self.xy_coupling * (self.deck_y - y)
-        prcxi_y = (self.deck_y - y)*(1+self.y_increase) + self.y_offset
-        prcxi_z = self.deck_z - z
-
-        prcxi_x = min(max(0, prcxi_x),self.deck_x)
-        prcxi_y = min(max(0, prcxi_y),self.deck_y)
-        prcxi_z = min(max(0, prcxi_z),self.deck_z)
-
-        return Coordinate(prcxi_x, prcxi_y, prcxi_z)
-
     def post_init(self, ros_node: BaseROS2DeviceNode):
         super().post_init(ros_node)
         self._unilabos_backend.post_init(ros_node)
@@ -801,7 +680,7 @@ class PRCXI9300Handler(LiquidHandlerAbstract):
         return super().set_liquid(wells, liquid_names, volumes)
 
     def set_liquid_from_plate(
-        self, plate: List[ResourceSlot], well_names: list[str], liquid_names: list[str], volumes: list[float]
+        self, plate: ResourceSlot, well_names: list[str], liquid_names: list[str], volumes: list[float]
     ) -> SetLiquidFromPlateReturn:
         return super().set_liquid_from_plate(plate, well_names, liquid_names, volumes)
 
@@ -1062,11 +941,6 @@ class PRCXI9300Handler(LiquidHandlerAbstract):
     async def shaker_action(self, time: int, module_no: int, amplitude: int, is_wait: bool):
         return await self._unilabos_backend.shaker_action(time, module_no, amplitude, is_wait)
 
-    async def magnetic_action(self, time: int, module_no: int, height: int, is_wait: bool):
-        return await self._unilabos_backend.magnetic_action(time, module_no, height, is_wait)
-    
-    async def shaking_incubation_action(self, time: int, module_no: int, amplitude: int, is_wait: bool, temperature: int):
-        return await self._unilabos_backend.shaking_incubation_action(time, module_no, amplitude, is_wait, temperature)
     async def heater_action(self, temperature: float, time: int):
         return await self._unilabos_backend.heater_action(temperature, time)
 
@@ -1083,7 +957,7 @@ class PRCXI9300Handler(LiquidHandlerAbstract):
         **backend_kwargs,
     ):
 
-        res = await super().move_plate(
+        return await super().move_plate(
             plate,
             to,
             intermediate_locations,
@@ -1095,12 +969,6 @@ class PRCXI9300Handler(LiquidHandlerAbstract):
             target_plate_number=to,
             **backend_kwargs,
         )
-        plate.unassign()
-        to.assign_child_resource(plate, location=Coordinate(0, 0, 0))
-        ROS2DeviceNode.run_async_func(self._ros_node.update_resource, True, **{
-            "resources": [self.deck]
-        })
-        return res
 
 
 class PRCXI9300Backend(LiquidHandlerBackend):
@@ -1125,7 +993,6 @@ class PRCXI9300Backend(LiquidHandlerBackend):
     def __init__(
         self,
         tablets_info: list[WorkTablets],
-        plate_positions: dict[int, Coordinate],
         host: str = "127.0.0.1",
         port: int = 9999,
         timeout: float = 10.0,
@@ -1135,18 +1002,9 @@ class PRCXI9300Backend(LiquidHandlerBackend):
         debug=False,
         matrix_id="",
         is_9320=False,
-        x_increase = 0,
-        y_increase = 0,
-        x_offset = 0,
-        y_offset = 0,
-        deck_z = 300,
-        deck_x = 0,
-        deck_y = 0,
-        xy_coupling = 0.0,
     ) -> None:
         super().__init__()
         self.tablets_info = tablets_info
-        self.plate_positions = plate_positions
         self.matrix_id = matrix_id
         self.api_client = PRCXI9300Api(host, port, timeout, axis, debug, is_9320)
         self.host, self.port, self.timeout = host, port, timeout
@@ -1154,15 +1012,6 @@ class PRCXI9300Backend(LiquidHandlerBackend):
         self._execute_setup = setup
         self.debug = debug
         self.axis = "Left"
-        self.x_increase = x_increase
-        self.y_increase = y_increase
-        self.xy_coupling = xy_coupling
-        self.x_offset = x_offset
-        self.y_offset = y_offset
-        self.deck_x = deck_x
-        self.deck_y = deck_y
-        self.deck_z = deck_z
-        self.tip_length = 0
 
     async def shaker_action(self, time: int, module_no: int, amplitude: int, is_wait: bool):
         step = self.api_client.shaker_action(
@@ -1174,27 +1023,6 @@ class PRCXI9300Backend(LiquidHandlerBackend):
         self.steps_todo_list.append(step)
         return step
 
-    async def shaking_incubation_action(self, time: int, module_no: int, amplitude: int, is_wait: bool, temperature: int):
-        step = self.api_client.shaking_incubation_action(
-            time=time,
-            module_no=module_no,
-            amplitude=amplitude,
-            is_wait=is_wait,
-            temperature=temperature,
-        )
-        self.steps_todo_list.append(step)
-        return step
-
-    async def magnetic_action(self, time: int, module_no: int, height: int, is_wait: bool): 
-        step = self.api_client.magnetic_action(
-            time=time,
-            module_no=module_no,
-            height=height,
-            is_wait=is_wait,
-        )
-        self.steps_todo_list.append(step)
-        return step
-
     async def pick_up_resource(self, pickup: ResourcePickup, **backend_kwargs):
 
         resource = pickup.resource
@@ -1233,42 +1061,29 @@ class PRCXI9300Backend(LiquidHandlerBackend):
         self._ros_node = ros_node
 
     def create_protocol(self, protocol_name):
-        if protocol_name == "":
-            protocol_name = f"protocol_{time.time()}"
         self.protocol_name = protocol_name
         self.steps_todo_list = []
 
-        if not len(self.matrix_id):
-            self.matrix_id = str(uuid.uuid4())
-            
-            material_list = self.api_client.get_all_materials()
-            material_dict = {material["uuid"]: material for material in material_list}
-            
-            work_tablets = []
-            for num, material_id in self.tablets_info.items():
-                work_tablets.append({
-                    "Number": num,
-                    "Material": material_dict[material_id]
-                })
-
-            self.matrix_info = {
-                "MatrixId": self.matrix_id,
-                "MatrixName": self.matrix_id,
-                "WorkTablets": work_tablets,
-                }
-            # print(json.dumps(self.matrix_info, indent=2))
-            res = self.api_client.add_WorkTablet_Matrix(self.matrix_info)
-            if not res["Success"]:
-                self.matrix_id = ""
-                raise AssertionError(f"Failed to create matrix: {res.get('Message', 'Unknown error')}")
-            print(f"PRCXI9300Backend created matrix with ID: {self.matrix_info['MatrixId']}, result: {res}")
-
     def run_protocol(self):
         assert self.is_reset_ok, "PRCXI9300Backend is not reset successfully. Please call setup() first."
         run_time = time.time()
-        solution_id = self.api_client.add_solution(
+        self.matrix_info = MatrixInfo(
-            f"protocol_{run_time}", self.matrix_id, self.steps_todo_list
+            MatrixId=f"{int(run_time)}",
+            MatrixName=f"protocol_{run_time}",
+            MatrixCount=len(self.tablets_info),
+            WorkTablets=self.tablets_info,
         )
+        # print(json.dumps(self.matrix_info, indent=2))
+        if not len(self.matrix_id):
+            res = self.api_client.add_WorkTablet_Matrix(self.matrix_info)
+            assert res["Success"], f"Failed to create matrix: {res.get('Message', 'Unknown error')}"
+            print(f"PRCXI9300Backend created matrix with ID: {self.matrix_info['MatrixId']}, result: {res}")
+            solution_id = self.api_client.add_solution(
+                f"protocol_{run_time}", self.matrix_info["MatrixId"], self.steps_todo_list
+            )
+        else:
+            print(f"PRCXI9300Backend using predefined worktable {self.matrix_id}, skipping matrix creation.")
+            solution_id = self.api_client.add_solution(f"protocol_{run_time}", self.matrix_id, self.steps_todo_list)
         print(f"PRCXI9300Backend created solution with ID: {solution_id}")
         self.api_client.load_solution(solution_id)
         print(json.dumps(self.steps_todo_list, indent=2))
@@ -1311,9 +1126,6 @@ class PRCXI9300Backend(LiquidHandlerBackend):
                     else:
                         await asyncio.sleep(1)
                 print("PRCXI9300 reset successfully.")
-                
-                self.api_client.update_clamp_jaw_position(self.matrix_id, self.plate_positions)
-
         except ConnectionRefusedError as e:
             raise RuntimeError(
                 f"Failed to connect to PRCXI9300 API at {self.host}:{self.port}. "
@@ -1362,7 +1174,7 @@ class PRCXI9300Backend(LiquidHandlerBackend):
         PlateNo = plate_indexes[0] + 1
         hole_col = tip_columns[0] + 1
         hole_row = 1
-        if self.num_channels != 8:
+        if self._num_channels == 1:
             hole_row = tipspot_index % 8 + 1
 
         step = self.api_client.Load(
@@ -1375,7 +1187,7 @@ class PRCXI9300Backend(LiquidHandlerBackend):
             blending_times=0,
             balance_height=0,
             plate_or_hole=f"H{hole_col}-8,T{PlateNo}",
-            hole_numbers=f"{(hole_col - 1) * 8 + hole_row}" if self._num_channels != 8 else "1,2,3,4,5",
+            hole_numbers=f"{(hole_col - 1) * 8 + hole_row}" if self._num_channels == 1 else "1,2,3,4,5",
         )
         self.steps_todo_list.append(step)
 
@@ -1436,7 +1248,7 @@ class PRCXI9300Backend(LiquidHandlerBackend):
         PlateNo = plate_indexes[0] + 1
         hole_col = tip_columns[0] + 1
 
-        if self.num_channels != 8:
+        if self.channel_num == 1:
             hole_row = tipspot_index % 8 + 1
 
         step = self.api_client.UnLoad(
@@ -1488,7 +1300,7 @@ class PRCXI9300Backend(LiquidHandlerBackend):
         PlateNo = plate_indexes[0] + 1
         hole_col = tip_columns[0] + 1
         hole_row = 1
-        if self.num_channels != 8:
+        if self.num_channels == 1:
             hole_row = tipspot_index % 8 + 1
 
         assert mix_time > 0
@@ -1545,7 +1357,7 @@ class PRCXI9300Backend(LiquidHandlerBackend):
         PlateNo = plate_indexes[0] + 1
         hole_col = tip_columns[0] + 1
         hole_row = 1
-        if self.num_channels != 8:
+        if self.num_channels == 1:
             hole_row = tipspot_index % 8 + 1
 
         step = self.api_client.Imbibing(
@@ -1603,7 +1415,7 @@ class PRCXI9300Backend(LiquidHandlerBackend):
         hole_col = tip_columns[0] + 1
 
         hole_row = 1
-        if self.num_channels != 8:
+        if self.num_channels == 1:
             hole_row = tipspot_index % 8 + 1
 
         step = self.api_client.Tapping(
@@ -1729,10 +1541,10 @@ class PRCXI9300Api:
         start = False
         while not success:
             status = self.step_state_list()
-            if status is None:
-                break
             if len(status) == 1:
                 start = True
+            if status is None:
+                break
             if len(status) == 0:
                 break
             if status[-1]["State"] == 2 and start:
@@ -1811,13 +1623,6 @@ class PRCXI9300Api:
         """GetWorkTabletMatrixById"""
         return self.call("IMatrix", "GetWorkTabletMatrixById", [matrix_id])
 
-    def update_clamp_jaw_position(self, target_matrix_id: str, plate_positions: List[Dict[str, Any]]):
-        position_params = {
-            "MatrixId": target_matrix_id,  
-            "WorkTablets": plate_positions
-        }
-        return self.call("IMatrix", "UpdateClampJawPosition", [position_params])
-
     def add_WorkTablet_Matrix(self, matrix: MatrixInfo):
         return self.call("IMatrix", "AddWorkTabletMatrix2" if self.is_9320 else "AddWorkTabletMatrix", [matrix])
 
@@ -2060,26 +1865,6 @@ class PRCXI9300Api:
             "AssistFun4": is_wait,
         }
 
-    def shaking_incubation_action(self, time: int, module_no: int, amplitude: int, is_wait: bool, temperature: int):
-        return {
-            "StepAxis": "Left",
-            "Function": "Shaking_Incubation",
-            "AssistFun1": time,
-            "AssistFun2": module_no,
-            "AssistFun3": amplitude,
-            "AssistFun4": is_wait,
-            "AssistFun5": temperature,
-        }
-    
-    def magnetic_action(self, time: int, module_no: int, height: int, is_wait: bool):
-        return {
-            "StepAxis": "Left",
-            "Function": "Magnetic",
-            "AssistFun1": time,
-            "AssistFun2": module_no,
-            "AssistFun3": height,
-            "AssistFun4": is_wait,
-        }
 
 class DefaultLayout:
 
@@ -2111,82 +1896,82 @@ class DefaultLayout:
                     {
                         "Number": 1,
                         "Code": "T1",
-                        "Material": {"uuid": "57b1e4711e9e4a32b529f3132fc5931f"},
+                        "Material": {"uuid": "57b1e4711e9e4a32b529f3132fc5931f", "materialEnum": 0},
                     },
                     {
                         "Number": 2,
                         "Code": "T2",
-                        "Material": {"uuid": "57b1e4711e9e4a32b529f3132fc5931f"},
+                        "Material": {"uuid": "57b1e4711e9e4a32b529f3132fc5931f", "materialEnum": 0},
                     },
                     {
                         "Number": 3,
                         "Code": "T3",
-                        "Material": {"uuid": "57b1e4711e9e4a32b529f3132fc5931f"},
+                        "Material": {"uuid": "57b1e4711e9e4a32b529f3132fc5931f", "materialEnum": 0},
                     },
                     {
                         "Number": 4,
                         "Code": "T4",
-                        "Material": {"uuid": "57b1e4711e9e4a32b529f3132fc5931f"},
+                        "Material": {"uuid": "57b1e4711e9e4a32b529f3132fc5931f", "materialEnum": 0},
                     },
                     {
                         "Number": 5,
                         "Code": "T5",
-                        "Material": {"uuid": "57b1e4711e9e4a32b529f3132fc5931f"},
+                        "Material": {"uuid": "57b1e4711e9e4a32b529f3132fc5931f", "materialEnum": 0},
                     },
                     {
                         "Number": 6,
                         "Code": "T6",
-                        "Material": {"uuid": "57b1e4711e9e4a32b529f3132fc5931f"},
+                        "Material": {"uuid": "57b1e4711e9e4a32b529f3132fc5931f", "materialEnum": 0},
                     },
                     {
                         "Number": 7,
                         "Code": "T7",
-                        "Material": {"uuid": "57b1e4711e9e4a32b529f3132fc5931f"},
+                        "Material": {"uuid": "57b1e4711e9e4a32b529f3132fc5931f", "materialEnum": 0},
                     },
                     {
                         "Number": 8,
                         "Code": "T8",
-                        "Material": {"uuid": "57b1e4711e9e4a32b529f3132fc5931f"},
+                        "Material": {"uuid": "57b1e4711e9e4a32b529f3132fc5931f", "materialEnum": 0},
                     },
                     {
                         "Number": 9,
                         "Code": "T9",
-                        "Material": {"uuid": "57b1e4711e9e4a32b529f3132fc5931f"},
+                        "Material": {"uuid": "57b1e4711e9e4a32b529f3132fc5931f", "materialEnum": 0},
                     },
                     {
                         "Number": 10,
                         "Code": "T10",
-                        "Material": {"uuid": "57b1e4711e9e4a32b529f3132fc5931f"},
+                        "Material": {"uuid": "57b1e4711e9e4a32b529f3132fc5931f", "materialEnum": 0},
                     },
                     {
                         "Number": 11,
                         "Code": "T11",
-                        "Material": {"uuid": "57b1e4711e9e4a32b529f3132fc5931f"},
+                        "Material": {"uuid": "57b1e4711e9e4a32b529f3132fc5931f", "materialEnum": 0},
                     },
                     {
                         "Number": 12,
                         "Code": "T12",
-                        "Material": {"uuid": "730067cf07ae43849ddf4034299030e9"},
+                        "Material": {"uuid": "730067cf07ae43849ddf4034299030e9", "materialEnum": 0},
                     },  # 这个设置成废液槽，用储液槽表示
                     {
                         "Number": 13,
                         "Code": "T13",
-                        "Material": {"uuid": "57b1e4711e9e4a32b529f3132fc5931f"},
+                        "Material": {"uuid": "57b1e4711e9e4a32b529f3132fc5931f", "materialEnum": 0},
                     },
                     {
                         "Number": 14,
                         "Code": "T14",
-                        "Material": {"uuid": "57b1e4711e9e4a32b529f3132fc5931f"},
+                        "Material": {"uuid": "57b1e4711e9e4a32b529f3132fc5931f", "materialEnum": 0},
                     },
                     {
                         "Number": 15,
                         "Code": "T15",
-                        "Material": {"uuid": "57b1e4711e9e4a32b529f3132fc5931f"},
+                        "Material": {"uuid": "57b1e4711e9e4a32b529f3132fc5931f", "materialEnum": 0},
                     },
                     {
                         "Number": 16,
                         "Code": "T16",
-                        "Material": {"uuid": "730067cf07ae43849ddf4034299030e9"},
+                        "Material": {"uuid": "730067cf07ae43849ddf4034299030e9", "materialEnum": 0},
                     },  # 这个设置成垃圾桶，用储液槽表示
                 ],
             }

unilabos/devices/ros_dev/liquid_handler_joint_publisher.py

@@ -19,10 +19,11 @@ from rclpy.node import Node
 import re
 
 class LiquidHandlerJointPublisher(BaseROS2DeviceNode):
-    def __init__(self,resources_config:list, resource_tracker, rate=50, device_id:str = "lh_joint_publisher", **kwargs):
+    def __init__(self,resources_config:list, resource_tracker, rate=50, device_id:str = "lh_joint_publisher", registry_name: str = "lh_joint_publisher", **kwargs):
         super().__init__(
             driver_instance=self,
             device_id=device_id,
+            registry_name=registry_name,
             status_types={},
             action_value_mappings={},
             hardware_interface={},

unilabos/devices/virtual/virtual_transferpump.py

@@ -31,14 +31,14 @@ class VirtualTransferPump:
 
         # 从config或kwargs中获取参数，确保类型正确
         if config:
-            self.max_volume = float(config.get('max_volume', 25.0))
+            self.max_volume = float(config.get("max_volume", 25.0))
-            self.port = config.get('port', 'VIRTUAL')
+            self.port = config.get("port", "VIRTUAL")
         else:
-            self.max_volume = float(kwargs.get('max_volume', 25.0))
+            self.max_volume = float(kwargs.get("max_volume", 25.0))
-            self.port = kwargs.get('port', 'VIRTUAL')
+            self.port = kwargs.get("port", "VIRTUAL")
 
-        self._transfer_rate = float(kwargs.get('transfer_rate', 0))
+        self._transfer_rate = float(kwargs.get("transfer_rate", 0))
-        self.mode = kwargs.get('mode', VirtualPumpMode.Normal)
+        self.mode = kwargs.get("mode", VirtualPumpMode.Normal)
 
         # 状态变量 - 确保都是正确类型
         self._status = "Idle"
@@ -54,7 +54,9 @@ class VirtualTransferPump:
         self.logger = logging.getLogger(f"VirtualTransferPump.{self.device_id}")
 
         print(f"🚰 === 虚拟转移泵 {self.device_id} 已创建 === ✨")
-        print(f"💨 快速模式: {'启用' if self._fast_mode else '禁用'} | 移动时间: {self._fast_move_time}s | 喷射时间: {self._fast_dispense_time}s")
+        print(
+            f"💨 快速模式: {'启用' if self._fast_mode else '禁用'} | 移动时间: {self._fast_move_time}s | 喷射时间: {self._fast_dispense_time}s"
+        )
         print(f"📊 最大容量: {self.max_volume}mL | 端口: {self.port}")
 
     def post_init(self, ros_node: BaseROS2DeviceNode):
@@ -189,7 +191,9 @@ class VirtualTransferPump:
                 operation_emoji = "📍"
 
             self.logger.info(f"🎯 SET_POSITION: {operation_type} {operation_emoji}")
-            self.logger.info(f"  📍 位置: {self._position:.2f}mL → {target_position:.2f}mL (移动 {volume_to_move:.2f}mL)")
+            self.logger.info(
+                f"  📍 位置: {self._position:.2f}mL → {target_position:.2f}mL (移动 {volume_to_move:.2f}mL)"
+            )
             self.logger.info(f"  🌊 速度: {velocity:.2f} mL/s")
             self.logger.info(f"  ⏰ 预计时间: {display_duration:.2f}s")
 
@@ -207,7 +211,11 @@ class VirtualTransferPump:
                 for i in range(steps + 1):
                     # 计算当前位置和进度
                     progress = (i / steps) * 100 if steps > 0 else 100
-                    current_pos = start_position + (target_position - start_position) * (i / steps) if steps > 0 else target_position
+                    current_pos = (
+                        start_position + (target_position - start_position) * (i / steps)
+                        if steps > 0
+                        else target_position
+                    )
 
                     # 更新状态
                     if i < steps:
@@ -244,7 +252,9 @@ class VirtualTransferPump:
 
             # 📊 最终状态日志
             if volume_to_move > 0.01:
-                self.logger.info(f"🎉 SET_POSITION 完成! 📍 最终位置: {self._position:.2f}mL | 💧 当前体积: {self._current_volume:.2f}mL")
+                self.logger.info(
+                    f"🎉 SET_POSITION 完成! 📍 最终位置: {self._position:.2f}mL | 💧 当前体积: {self._current_volume:.2f}mL"
+                )
 
             # 返回符合action定义的结果
             return {
@@ -252,7 +262,7 @@ class VirtualTransferPump:
                 "message": f"✅ 成功移动到位置 {self._position:.2f}mL ({operation_type})",
                 "final_position": self._position,
                 "final_volume": self._current_volume,
-                "operation_type": operation_type
+                "operation_type": operation_type,
             }
 
         except Exception as e:
@@ -262,7 +272,7 @@ class VirtualTransferPump:
                 "success": False,
                 "message": error_msg,
                 "final_position": self._position,
-                "final_volume": self._current_volume
+                "final_volume": self._current_volume,
             }
 
     # 其他泵操作方法
@@ -388,7 +398,9 @@ class VirtualTransferPump:
         return self._current_volume >= (self.max_volume - 0.01)  # 允许小量误差
 
     def __str__(self):
-        return f"VirtualTransferPump({self.device_id}: {self._current_volume:.2f}/{self.max_volume} ml, {self._status})"
+        return (
+            f"VirtualTransferPump({self.device_id}: {self._current_volume:.2f}/{self.max_volume} ml, {self._status})"
+        )
 
     def __repr__(self):
         return self.__str__()

unilabos/devices/virtual/workbench.py

@@ -0,0 +1,874 @@
+"""
+Virtual Workbench Device - 模拟工作台设备
+包含:
+- 1个机械臂 (每次操作3s, 独占锁)
+- 3个加热台 (每次加热10s, 可并行)
+
+工作流程:
+1. A1-A5 物料同时启动, 竞争机械臂
+2. 机械臂将物料移动到空闲加热台
+3. 加热完成后, 机械臂将物料移动到C1-C5
+
+注意: 调用来自线程池, 使用 threading.Lock 进行同步
+"""
+
+import logging
+import time
+from typing import Dict, Any, Optional, List
+from dataclasses import dataclass
+from enum import Enum
+from threading import Lock, RLock
+
+from typing_extensions import TypedDict
+
+from unilabos.registry.decorators import (
+    device, action, ActionInputHandle, ActionOutputHandle, DataSource, topic_config, not_action
+)
+from unilabos.ros.nodes.base_device_node import BaseROS2DeviceNode
+from unilabos.resources.resource_tracker import SampleUUIDsType, LabSample
+
+
+# ============ TypedDict 返回类型定义 ============
+
+
+class MoveToHeatingStationResult(TypedDict):
+    """move_to_heating_station 返回类型"""
+
+    success: bool
+    station_id: int
+    material_id: str
+    material_number: int
+    message: str
+    unilabos_samples: List[LabSample]
+
+
+class StartHeatingResult(TypedDict):
+    """start_heating 返回类型"""
+
+    success: bool
+    station_id: int
+    material_id: str
+    material_number: int
+    message: str
+    unilabos_samples: List[LabSample]
+
+
+class MoveToOutputResult(TypedDict):
+    """move_to_output 返回类型"""
+
+    success: bool
+    station_id: int
+    material_id: str
+    output_position: str
+    message: str
+    unilabos_samples: List[LabSample]
+
+
+class PrepareMaterialsResult(TypedDict):
+    """prepare_materials 返回类型 - 批量准备物料"""
+
+    success: bool
+    count: int
+    material_1: int  # 物料编号1
+    material_2: int  # 物料编号2
+    material_3: int  # 物料编号3
+    material_4: int  # 物料编号4
+    material_5: int  # 物料编号5
+    message: str
+    unilabos_samples: List[LabSample]
+
+
+# ============ 状态枚举 ============
+
+
+class HeatingStationState(Enum):
+    """加热台状态枚举"""
+
+    IDLE = "idle"  # 空闲
+    OCCUPIED = "occupied"  # 已放置物料, 等待加热
+    HEATING = "heating"  # 加热中
+    COMPLETED = "completed"  # 加热完成, 等待取走
+
+
+class ArmState(Enum):
+    """机械臂状态枚举"""
+
+    IDLE = "idle"  # 空闲
+    BUSY = "busy"  # 工作中
+
+
+@dataclass
+class HeatingStation:
+    """加热台数据结构"""
+
+    station_id: int
+    state: HeatingStationState = HeatingStationState.IDLE
+    current_material: Optional[str] = None  # 当前物料 (如 "A1", "A2")
+    material_number: Optional[int] = None  # 物料编号 (1-5)
+    heating_start_time: Optional[float] = None
+    heating_progress: float = 0.0
+
+
+@device(
+    id="virtual_workbench",
+    category=["virtual_device"],
+    description="Virtual Workbench with 1 robotic arm and 3 heating stations for concurrent material processing",
+)
+class VirtualWorkbench:
+    """
+    Virtual Workbench Device - 虚拟工作台设备
+
+    模拟一个包含1个机械臂和3个加热台的工作站
+    - 机械臂操作耗时3秒, 同一时间只能执行一个操作
+    - 加热台加热耗时10秒, 3个加热台可并行工作
+
+    工作流:
+    1. 物料A1-A5并发启动(线程池), 竞争机械臂使用权
+    2. 获取机械臂后, 查找空闲加热台
+    3. 机械臂将物料放入加热台, 开始加热
+    4. 加热完成后, 机械臂将物料移动到目标位置Cn
+    """
+
+    _ros_node: BaseROS2DeviceNode
+
+    # 配置常量
+    ARM_OPERATION_TIME: float = 2  # 机械臂操作时间(秒)
+    HEATING_TIME: float = 60.0  # 加热时间(秒)
+    NUM_HEATING_STATIONS: int = 3  # 加热台数量
+
+    def __init__(self, device_id: Optional[str] = None, config: Optional[Dict[str, Any]] = None, **kwargs):
+        # 处理可能的不同调用方式
+        if device_id is None and "id" in kwargs:
+            device_id = kwargs.pop("id")
+        if config is None and "config" in kwargs:
+            config = kwargs.pop("config")
+
+        self.device_id = device_id or "virtual_workbench"
+        self.config = config or {}
+
+        self.logger = logging.getLogger(f"VirtualWorkbench.{self.device_id}")
+        self.data: Dict[str, Any] = {}
+
+        # 从config中获取可配置参数
+        self.ARM_OPERATION_TIME = float(self.config.get("arm_operation_time", self.ARM_OPERATION_TIME))
+        self.HEATING_TIME = float(self.config.get("heating_time", self.HEATING_TIME))
+        self.NUM_HEATING_STATIONS = int(self.config.get("num_heating_stations", self.NUM_HEATING_STATIONS))
+
+        # 机械臂状态和锁
+        self._arm_lock = Lock()
+        self._arm_state = ArmState.IDLE
+        self._arm_current_task: Optional[str] = None
+
+        # 加热台状态
+        self._heating_stations: Dict[int, HeatingStation] = {
+            i: HeatingStation(station_id=i) for i in range(1, self.NUM_HEATING_STATIONS + 1)
+        }
+        self._stations_lock = RLock()
+
+        # 任务追踪
+        self._active_tasks: Dict[str, Dict[str, Any]] = {}
+        self._tasks_lock = Lock()
+
+        # 处理其他kwargs参数
+        skip_keys = {"arm_operation_time", "heating_time", "num_heating_stations"}
+        for key, value in kwargs.items():
+            if key not in skip_keys and not hasattr(self, key):
+                setattr(self, key, value)
+
+        self.logger.info(f"=== 虚拟工作台 {self.device_id} 已创建 ===")
+        self.logger.info(
+            f"机械臂操作时间: {self.ARM_OPERATION_TIME}s | "
+            f"加热时间: {self.HEATING_TIME}s | "
+            f"加热台数量: {self.NUM_HEATING_STATIONS}"
+        )
+
+    @not_action
+    def post_init(self, ros_node: BaseROS2DeviceNode):
+        """ROS节点初始化后回调"""
+        self._ros_node = ros_node
+
+    @not_action
+    def initialize(self) -> bool:
+        """初始化虚拟工作台"""
+        self.logger.info(f"初始化虚拟工作台 {self.device_id}")
+
+        with self._stations_lock:
+            for station in self._heating_stations.values():
+                station.state = HeatingStationState.IDLE
+                station.current_material = None
+                station.material_number = None
+                station.heating_progress = 0.0
+
+        self.data.update(
+            {
+                "status": "Ready",
+                "arm_state": ArmState.IDLE.value,
+                "arm_current_task": None,
+                "heating_stations": self._get_stations_status(),
+                "active_tasks_count": 0,
+                "message": "工作台就绪",
+            }
+        )
+
+        self.logger.info(f"工作台初始化完成: {self.NUM_HEATING_STATIONS}个加热台就绪")
+        return True
+
+    @not_action
+    def cleanup(self) -> bool:
+        """清理虚拟工作台"""
+        self.logger.info(f"清理虚拟工作台 {self.device_id}")
+
+        self._arm_state = ArmState.IDLE
+        self._arm_current_task = None
+
+        with self._stations_lock:
+            self._heating_stations.clear()
+
+        with self._tasks_lock:
+            self._active_tasks.clear()
+
+        self.data.update(
+            {
+                "status": "Offline",
+                "arm_state": ArmState.IDLE.value,
+                "heating_stations": {},
+                "message": "工作台已关闭",
+            }
+        )
+        return True
+
+    def _get_stations_status(self) -> Dict[int, Dict[str, Any]]:
+        """获取所有加热台状态"""
+        with self._stations_lock:
+            return {
+                station_id: {
+                    "state": station.state.value,
+                    "current_material": station.current_material,
+                    "material_number": station.material_number,
+                    "heating_progress": station.heating_progress,
+                }
+                for station_id, station in self._heating_stations.items()
+            }
+
+    def _update_data_status(self, message: Optional[str] = None):
+        """更新状态数据"""
+        self.data.update(
+            {
+                "arm_state": self._arm_state.value,
+                "arm_current_task": self._arm_current_task,
+                "heating_stations": self._get_stations_status(),
+                "active_tasks_count": len(self._active_tasks),
+            }
+        )
+        if message:
+            self.data["message"] = message
+
+    def _find_available_heating_station(self) -> Optional[int]:
+        """查找空闲的加热台"""
+        with self._stations_lock:
+            for station_id, station in self._heating_stations.items():
+                if station.state == HeatingStationState.IDLE:
+                    return station_id
+        return None
+
+    def _acquire_arm(self, task_description: str) -> bool:
+        """获取机械臂使用权(阻塞直到获取)"""
+        self.logger.info(f"[{task_description}] 等待获取机械臂...")
+        self._arm_lock.acquire()
+        self._arm_state = ArmState.BUSY
+        self._arm_current_task = task_description
+        self._update_data_status(f"机械臂执行: {task_description}")
+        self.logger.info(f"[{task_description}] 成功获取机械臂使用权")
+        return True
+
+    def _release_arm(self):
+        """释放机械臂"""
+        task = self._arm_current_task
+        self._arm_state = ArmState.IDLE
+        self._arm_current_task = None
+        self._arm_lock.release()
+        self._update_data_status(f"机械臂已释放 (完成: {task})")
+        self.logger.info(f"机械臂已释放 (完成: {task})")
+
+    @action(
+        auto_prefix=True,
+        description="批量准备物料 - 虚拟起始节点, 生成A1-A5物料, 输出5个handle供后续节点使用",
+        handles=[
+            ActionOutputHandle(key="channel_1", data_type="workbench_material",
+                         label="实验1", data_key="material_1", data_source=DataSource.EXECUTOR),
+            ActionOutputHandle(key="channel_2", data_type="workbench_material",
+                         label="实验2", data_key="material_2", data_source=DataSource.EXECUTOR),
+            ActionOutputHandle(key="channel_3", data_type="workbench_material",
+                         label="实验3", data_key="material_3", data_source=DataSource.EXECUTOR),
+            ActionOutputHandle(key="channel_4", data_type="workbench_material",
+                         label="实验4", data_key="material_4", data_source=DataSource.EXECUTOR),
+            ActionOutputHandle(key="channel_5", data_type="workbench_material",
+                         label="实验5", data_key="material_5", data_source=DataSource.EXECUTOR),
+        ],
+    )
+    def prepare_materials(
+        self,
+        sample_uuids: SampleUUIDsType,
+        count: int = 5,
+    ) -> PrepareMaterialsResult:
+        """
+        批量准备物料 - 虚拟起始节点
+
+        作为工作流的起始节点, 生成指定数量的物料编号供后续节点使用。
+        输出5个handle (material_1 ~ material_5), 分别对应实验1~5。
+        """
+        materials = [i for i in range(1, count + 1)]
+
+        self.logger.info(
+            f"[准备物料] 生成 {count} 个物料: A1-A{count} -> material_1~material_{count}"
+        )
+
+        return {
+            "success": True,
+            "count": count,
+            "material_1": materials[0] if len(materials) > 0 else 0,
+            "material_2": materials[1] if len(materials) > 1 else 0,
+            "material_3": materials[2] if len(materials) > 2 else 0,
+            "material_4": materials[3] if len(materials) > 3 else 0,
+            "material_5": materials[4] if len(materials) > 4 else 0,
+            "message": f"已准备 {count} 个物料: A1-A{count}",
+            "unilabos_samples": [
+                LabSample(
+                    sample_uuid=sample_uuid,
+                    oss_path="",
+                    extra={"material_uuid": content} if isinstance(content, str) else (content.serialize() if content else {}),
+                )
+                for sample_uuid, content in sample_uuids.items()
+            ],
+        }
+
+    @action(
+        auto_prefix=True,
+        description="将物料从An位置移动到空闲加热台, 返回分配的加热台ID",
+        handles=[
+            ActionInputHandle(key="material_input", data_type="workbench_material",
+                        label="物料编号", data_key="material_number", data_source=DataSource.HANDLE),
+            ActionOutputHandle(key="heating_station_output", data_type="workbench_station",
+                         label="加热台ID", data_key="station_id", data_source=DataSource.EXECUTOR),
+            ActionOutputHandle(key="material_number_output", data_type="workbench_material",
+                         label="物料编号", data_key="material_number", data_source=DataSource.EXECUTOR),
+        ],
+    )
+    def move_to_heating_station(
+        self,
+        sample_uuids: SampleUUIDsType,
+        material_number: int,
+    ) -> MoveToHeatingStationResult:
+        """
+        将物料从An位置移动到加热台
+
+        多线程并发调用时, 会竞争机械臂使用权, 并自动查找空闲加热台
+        """
+        material_id = f"A{material_number}"
+        task_desc = f"移动{material_id}到加热台"
+        self.logger.info(f"[任务] {task_desc} - 开始执行")
+
+        with self._tasks_lock:
+            self._active_tasks[material_id] = {
+                "status": "waiting_for_arm",
+                "start_time": time.time(),
+            }
+
+        try:
+            with self._tasks_lock:
+                self._active_tasks[material_id]["status"] = "waiting_for_arm"
+            self._acquire_arm(task_desc)
+
+            with self._tasks_lock:
+                self._active_tasks[material_id]["status"] = "finding_station"
+            station_id = None
+
+            while station_id is None:
+                station_id = self._find_available_heating_station()
+                if station_id is None:
+                    self.logger.info(f"[{material_id}] 没有空闲加热台, 等待中...")
+                    self._release_arm()
+                    time.sleep(0.5)
+                    self._acquire_arm(task_desc)
+
+            with self._stations_lock:
+                self._heating_stations[station_id].state = HeatingStationState.OCCUPIED
+                self._heating_stations[station_id].current_material = material_id
+                self._heating_stations[station_id].material_number = material_number
+
+            with self._tasks_lock:
+                self._active_tasks[material_id]["status"] = "arm_moving"
+                self._active_tasks[material_id]["assigned_station"] = station_id
+            self.logger.info(f"[{material_id}] 机械臂正在移动到加热台{station_id}...")
+
+            time.sleep(self.ARM_OPERATION_TIME)
+
+            self._update_data_status(f"{material_id}已放入加热台{station_id}")
+            self.logger.info(
+                f"[{material_id}] 已放入加热台{station_id} (用时{self.ARM_OPERATION_TIME}s)"
+            )
+
+            self._release_arm()
+
+            with self._tasks_lock:
+                self._active_tasks[material_id]["status"] = "placed_on_station"
+
+            return {
+                "success": True,
+                "station_id": station_id,
+                "material_id": material_id,
+                "material_number": material_number,
+                "message": f"{material_id}已成功移动到加热台{station_id}",
+                "unilabos_samples": [
+                    LabSample(
+                        sample_uuid=sample_uuid,
+                        oss_path="",
+                        extra=(
+                            {"material_uuid": content}
+                            if isinstance(content, str) else (content.serialize() if content else {})
+                        ),
+                    )
+                    for sample_uuid, content in sample_uuids.items()
+                ],
+            }
+
+        except Exception as e:
+            self.logger.error(f"[{material_id}] 移动失败: {str(e)}")
+            if self._arm_lock.locked():
+                self._release_arm()
+            return {
+                "success": False,
+                "station_id": -1,
+                "material_id": material_id,
+                "material_number": material_number,
+                "message": f"移动失败: {str(e)}",
+                "unilabos_samples": [
+                    LabSample(
+                        sample_uuid=sample_uuid,
+                        oss_path="",
+                        extra=(
+                            {"material_uuid": content}
+                            if isinstance(content, str) else (content.serialize() if content else {})
+                        ),
+                    )
+                    for sample_uuid, content in sample_uuids.items()
+                ],
+            }
+
+    @action(
+        auto_prefix=True,
+        always_free=True,
+        description="启动指定加热台的加热程序",
+        handles=[
+            ActionInputHandle(key="station_id_input", data_type="workbench_station",
+                        label="加热台ID", data_key="station_id", data_source=DataSource.HANDLE),
+            ActionInputHandle(key="material_number_input", data_type="workbench_material",
+                        label="物料编号", data_key="material_number", data_source=DataSource.HANDLE),
+            ActionOutputHandle(key="heating_done_station", data_type="workbench_station",
+                         label="加热完成-加热台ID", data_key="station_id", data_source=DataSource.EXECUTOR),
+            ActionOutputHandle(key="heating_done_material", data_type="workbench_material",
+                         label="加热完成-物料编号", data_key="material_number", data_source=DataSource.EXECUTOR),
+        ],
+    )
+    def start_heating(
+        self,
+        sample_uuids: SampleUUIDsType,
+        station_id: int,
+        material_number: int,
+    ) -> StartHeatingResult:
+        """
+        启动指定加热台的加热程序
+        """
+        self.logger.info(f"[加热台{station_id}] 开始加热")
+
+        if station_id not in self._heating_stations:
+            return {
+                "success": False,
+                "station_id": station_id,
+                "material_id": "",
+                "material_number": material_number,
+                "message": f"无效的加热台ID: {station_id}",
+                "unilabos_samples": [
+                    LabSample(
+                        sample_uuid=sample_uuid,
+                        oss_path="",
+                        extra=(
+                            {"material_uuid": content}
+                            if isinstance(content, str) else (content.serialize() if content else {})
+                        ),
+                    )
+                    for sample_uuid, content in sample_uuids.items()
+                ],
+            }
+
+        with self._stations_lock:
+            station = self._heating_stations[station_id]
+
+            if station.current_material is None:
+                return {
+                    "success": False,
+                    "station_id": station_id,
+                    "material_id": "",
+                    "material_number": material_number,
+                    "message": f"加热台{station_id}上没有物料",
+                    "unilabos_samples": [
+                        LabSample(
+                            sample_uuid=sample_uuid,
+                            oss_path="",
+                            extra=(
+                                {"material_uuid": content}
+                                if isinstance(content, str) else (content.serialize() if content else {})
+                            ),
+                        )
+                        for sample_uuid, content in sample_uuids.items()
+                    ],
+                }
+
+            if station.state == HeatingStationState.HEATING:
+                return {
+                    "success": False,
+                    "station_id": station_id,
+                    "material_id": station.current_material,
+                    "material_number": material_number,
+                    "message": f"加热台{station_id}已经在加热中",
+                    "unilabos_samples": [
+                        LabSample(
+                            sample_uuid=sample_uuid,
+                            oss_path="",
+                            extra=(
+                                {"material_uuid": content}
+                                if isinstance(content, str) else (content.serialize() if content else {})
+                            ),
+                        )
+                        for sample_uuid, content in sample_uuids.items()
+                    ],
+                }
+
+            material_id = station.current_material
+
+            station.state = HeatingStationState.HEATING
+            station.heating_start_time = time.time()
+            station.heating_progress = 0.0
+
+        with self._tasks_lock:
+            if material_id in self._active_tasks:
+                self._active_tasks[material_id]["status"] = "heating"
+
+        self._update_data_status(f"加热台{station_id}开始加热{material_id}")
+
+        with self._stations_lock:
+            heating_list = [
+                f"加热台{sid}:{s.current_material}"
+                for sid, s in self._heating_stations.items()
+                if s.state == HeatingStationState.HEATING and s.current_material
+            ]
+        self.logger.info(f"[并行加热] 当前同时加热中: {', '.join(heating_list)}")
+
+        start_time = time.time()
+        last_countdown_log = start_time
+        while True:
+            elapsed = time.time() - start_time
+            remaining = max(0.0, self.HEATING_TIME - elapsed)
+            progress = min(100.0, (elapsed / self.HEATING_TIME) * 100)
+
+            with self._stations_lock:
+                self._heating_stations[station_id].heating_progress = progress
+
+            self._update_data_status(f"加热台{station_id}加热中: {progress:.1f}%")
+
+            if time.time() - last_countdown_log >= 5.0:
+                self.logger.info(f"[加热台{station_id}] {material_id} 剩余 {remaining:.1f}s")
+                last_countdown_log = time.time()
+
+            if elapsed >= self.HEATING_TIME:
+                break
+
+            time.sleep(1.0)
+
+        with self._stations_lock:
+            self._heating_stations[station_id].state = HeatingStationState.COMPLETED
+            self._heating_stations[station_id].heating_progress = 100.0
+
+        with self._tasks_lock:
+            if material_id in self._active_tasks:
+                self._active_tasks[material_id]["status"] = "heating_completed"
+
+        self._update_data_status(f"加热台{station_id}加热完成")
+        self.logger.info(f"[加热台{station_id}] {material_id}加热完成 (用时{self.HEATING_TIME}s)")
+
+        return {
+            "success": True,
+            "station_id": station_id,
+            "material_id": material_id,
+            "material_number": material_number,
+            "message": f"加热台{station_id}加热完成",
+            "unilabos_samples": [
+                LabSample(
+                    sample_uuid=sample_uuid,
+                    oss_path="",
+                    extra=(
+                        {"material_uuid": content}
+                        if isinstance(content, str) else (content.serialize() if content else {})
+                    ),
+                )
+                for sample_uuid, content in sample_uuids.items()
+            ],
+        }
+
+    @action(
+        auto_prefix=True,
+        description="将物料从加热台移动到输出位置Cn",
+        handles=[
+            ActionInputHandle(key="output_station_input", data_type="workbench_station",
+                        label="加热台ID", data_key="station_id", data_source=DataSource.HANDLE),
+            ActionInputHandle(key="output_material_input", data_type="workbench_material",
+                        label="物料编号", data_key="material_number", data_source=DataSource.HANDLE),
+        ],
+    )
+    def move_to_output(
+        self,
+        sample_uuids: SampleUUIDsType,
+        station_id: int,
+        material_number: int,
+    ) -> MoveToOutputResult:
+        """
+        将物料从加热台移动到输出位置Cn
+        """
+        output_number = material_number
+
+        if station_id not in self._heating_stations:
+            return {
+                "success": False,
+                "station_id": station_id,
+                "material_id": "",
+                "output_position": f"C{output_number}",
+                "message": f"无效的加热台ID: {station_id}",
+                "unilabos_samples": [
+                    LabSample(
+                        sample_uuid=sample_uuid,
+                        oss_path="",
+                        extra=(
+                            {"material_uuid": content}
+                            if isinstance(content, str) else (content.serialize() if content else {})
+                        ),
+                    )
+                    for sample_uuid, content in sample_uuids.items()
+                ],
+            }
+
+        with self._stations_lock:
+            station = self._heating_stations[station_id]
+            material_id = station.current_material
+
+            if material_id is None:
+                return {
+                    "success": False,
+                    "station_id": station_id,
+                    "material_id": "",
+                    "output_position": f"C{output_number}",
+                    "message": f"加热台{station_id}上没有物料",
+                    "unilabos_samples": [
+                        LabSample(
+                            sample_uuid=sample_uuid,
+                            oss_path="",
+                            extra=(
+                                {"material_uuid": content}
+                                if isinstance(content, str) else (content.serialize() if content else {})
+                            ),
+                        )
+                        for sample_uuid, content in sample_uuids.items()
+                    ],
+                }
+
+            if station.state != HeatingStationState.COMPLETED:
+                return {
+                    "success": False,
+                    "station_id": station_id,
+                    "material_id": material_id,
+                    "output_position": f"C{output_number}",
+                    "message": f"加热台{station_id}尚未完成加热 (当前状态: {station.state.value})",
+                    "unilabos_samples": [
+                        LabSample(
+                            sample_uuid=sample_uuid,
+                            oss_path="",
+                            extra=(
+                                {"material_uuid": content}
+                                if isinstance(content, str) else (content.serialize() if content else {})
+                            ),
+                        )
+                        for sample_uuid, content in sample_uuids.items()
+                    ],
+                }
+
+        output_position = f"C{output_number}"
+        task_desc = f"从加热台{station_id}移动{material_id}到{output_position}"
+        self.logger.info(f"[任务] {task_desc}")
+
+        try:
+            with self._tasks_lock:
+                if material_id in self._active_tasks:
+                    self._active_tasks[material_id]["status"] = "waiting_for_arm_output"
+
+            self._acquire_arm(task_desc)
+
+            with self._tasks_lock:
+                if material_id in self._active_tasks:
+                    self._active_tasks[material_id]["status"] = "arm_moving_to_output"
+
+            self.logger.info(
+                f"[{material_id}] 机械臂正在从加热台{station_id}取出并移动到{output_position}..."
+            )
+            time.sleep(self.ARM_OPERATION_TIME)
+
+            with self._stations_lock:
+                self._heating_stations[station_id].state = HeatingStationState.IDLE
+                self._heating_stations[station_id].current_material = None
+                self._heating_stations[station_id].material_number = None
+                self._heating_stations[station_id].heating_progress = 0.0
+                self._heating_stations[station_id].heating_start_time = None
+
+            self._release_arm()
+
+            with self._tasks_lock:
+                if material_id in self._active_tasks:
+                    self._active_tasks[material_id]["status"] = "completed"
+                    self._active_tasks[material_id]["end_time"] = time.time()
+
+            self._update_data_status(f"{material_id}已移动到{output_position}")
+            self.logger.info(
+                f"[{material_id}] 已成功移动到{output_position} (用时{self.ARM_OPERATION_TIME}s)"
+            )
+
+            return {
+                "success": True,
+                "station_id": station_id,
+                "material_id": material_id,
+                "output_position": output_position,
+                "message": f"{material_id}已成功移动到{output_position}",
+                "unilabos_samples": [
+                    LabSample(
+                        sample_uuid=sample_uuid,
+                        oss_path="",
+                        extra=(
+                            {"material_uuid": content}
+                            if isinstance(content, str)
+                            else (content.serialize() if content is not None else {})
+                        ),
+                    )
+                    for sample_uuid, content in sample_uuids.items()
+                ],
+            }
+
+        except Exception as e:
+            self.logger.error(f"移动到输出位置失败: {str(e)}")
+            if self._arm_lock.locked():
+                self._release_arm()
+            return {
+                "success": False,
+                "station_id": station_id,
+                "material_id": "",
+                "output_position": output_position,
+                "message": f"移动失败: {str(e)}",
+                "unilabos_samples": [
+                    LabSample(
+                        sample_uuid=sample_uuid,
+                        oss_path="",
+                        extra=(
+                            {"material_uuid": content}
+                            if isinstance(content, str) else (content.serialize() if content else {})
+                        ),
+                    )
+                    for sample_uuid, content in sample_uuids.items()
+                ],
+            }
+
+    # ============ 状态属性 ============
+
+    @property
+    @topic_config()
+    def status(self) -> str:
+        return self.data.get("status", "Unknown")
+
+    @property
+    @topic_config()
+    def arm_state(self) -> str:
+        return self._arm_state.value
+
+    @property
+    @topic_config()
+    def arm_current_task(self) -> str:
+        return self._arm_current_task or ""
+
+    @property
+    @topic_config()
+    def heating_station_1_state(self) -> str:
+        with self._stations_lock:
+            station = self._heating_stations.get(1)
+            return station.state.value if station else "unknown"
+
+    @property
+    @topic_config()
+    def heating_station_1_material(self) -> str:
+        with self._stations_lock:
+            station = self._heating_stations.get(1)
+            return station.current_material or "" if station else ""
+
+    @property
+    @topic_config()
+    def heating_station_1_progress(self) -> float:
+        with self._stations_lock:
+            station = self._heating_stations.get(1)
+            return station.heating_progress if station else 0.0
+
+    @property
+    @topic_config()
+    def heating_station_2_state(self) -> str:
+        with self._stations_lock:
+            station = self._heating_stations.get(2)
+            return station.state.value if station else "unknown"
+
+    @property
+    @topic_config()
+    def heating_station_2_material(self) -> str:
+        with self._stations_lock:
+            station = self._heating_stations.get(2)
+            return station.current_material or "" if station else ""
+
+    @property
+    @topic_config()
+    def heating_station_2_progress(self) -> float:
+        with self._stations_lock:
+            station = self._heating_stations.get(2)
+            return station.heating_progress if station else 0.0
+
+    @property
+    @topic_config()
+    def heating_station_3_state(self) -> str:
+        with self._stations_lock:
+            station = self._heating_stations.get(3)
+            return station.state.value if station else "unknown"
+
+    @property
+    @topic_config()
+    def heating_station_3_material(self) -> str:
+        with self._stations_lock:
+            station = self._heating_stations.get(3)
+            return station.current_material or "" if station else ""
+
+    @property
+    @topic_config()
+    def heating_station_3_progress(self) -> float:
+        with self._stations_lock:
+            station = self._heating_stations.get(3)
+            return station.heating_progress if station else 0.0
+
+    @property
+    @topic_config()
+    def active_tasks_count(self) -> int:
+        with self._tasks_lock:
+            return len(self._active_tasks)
+
+    @property
+    @topic_config()
+    def message(self) -> str:
+        return self.data.get("message", "")

unilabos/devices/workstation/README.md

@@ -1,9 +1,5 @@
 # 工作站抽象基类物料系统架构说明
 
-## 设计理念
-
-基于用户需求"请你帮我系统思考一下，工作站抽象基类的物料系统基类该如何构建"，我们最终确定了一个**PyLabRobot Deck为中心**的简化架构。
-
 ### 核心原则
 
 1. **PyLabRobot为物料管理核心**：使用PyLabRobot的Deck系统作为物料管理的基础，利用其成熟的Resource体系

unilabos/devices/workstation/bioyond_studio/bioyond_cell/20251229_多订单返回说明.md

@@ -0,0 +1,113 @@
+# Bioyond Cell 工作站 - 多订单返回示例
+
+本文档说明了 `create_orders` 函数如何收集并返回所有订单的完成报文。
+
+## 问题描述
+
+之前的实现只会等待并返回第一个订单的完成报文，如果有多个订单（例如从 Excel 解析出 3 个订单），只能得到第一个订单的推送信息。
+
+## 解决方案
+
+修改后的 `create_orders` 函数现在会：
+
+1. **提取所有 orderCode**：从 LIMS 接口返回的 `data` 列表中提取所有订单编号
+2. **逐个等待完成**：遍历所有 orderCode，调用 `wait_for_order_finish` 等待每个订单完成
+3. **收集所有报文**：将每个订单的完成报文存入 `all_reports` 列表
+4. **统一返回**：返回包含所有订单报文的 JSON 格式数据
+
+## 返回格式
+
+```json
+{
+    "status": "all_completed",
+    "total_orders": 3,
+    "reports": [
+        {
+            "token": "",
+            "request_time": "2025-12-24T15:32:09.2148671+08:00",
+            "data": {
+                "orderId": "3a1e614d-a082-c44a-60be-68647a35e6f1",
+                "orderCode": "BSO2025122400024",
+                "orderName": "DP20251224001",
+                "status": "30",
+                "workflowStatus": "completed",
+                "usedMaterials": [...]
+            }
+        },
+        {
+            "token": "",
+            "request_time": "2025-12-24T15:32:09.9999039+08:00",
+            "data": {
+                "orderId": "3a1e614d-a0a2-f7a9-9360-610021c9479d",
+                "orderCode": "BSO2025122400025",
+                "orderName": "DP20251224002",
+                "status": "30",
+                "workflowStatus": "completed",
+                "usedMaterials": [...]
+            }
+        },
+        {
+            "token": "",
+            "request_time": "2025-12-24T15:34:00.4139986+08:00",
+            "data": {
+                "orderId": "3a1e614d-a0cd-81ca-9f7f-2f4e93af01cd",
+                "orderCode": "BSO2025122400026",
+                "orderName": "DP20251224003",
+                "status": "30",
+                "workflowStatus": "completed",
+                "usedMaterials": [...]
+            }
+        }
+    ],
+    "original_response": {...}
+}
+```
+
+## 使用示例
+
+```python
+# 调用 create_orders
+result = workstation.create_orders("20251224.xlsx")
+
+# 访问返回数据
+print(f"总订单数: {result['total_orders']}")
+print(f"状态: {result['status']}")
+
+# 遍历所有订单的报文
+for i, report in enumerate(result['reports'], 1):
+    order_data = report.get('data', {})
+    print(f"\n订单 {i}:")
+    print(f"  orderCode: {order_data.get('orderCode')}")
+    print(f"  orderName: {order_data.get('orderName')}")
+    print(f"  status: {order_data.get('status')}")
+    print(f"  使用物料数: {len(order_data.get('usedMaterials', []))}")
+```
+
+## 控制台输出示例
+
+```
+[create_orders] 即将提交订单数量: 3
+[create_orders] 接口返回: {...}
+[create_orders] 等待 3 个订单完成: ['BSO2025122400024', 'BSO2025122400025', 'BSO2025122400026']
+[create_orders] 正在等待第 1/3 个订单: BSO2025122400024
+[create_orders] ✓ 订单 BSO2025122400024 完成
+[create_orders] 正在等待第 2/3 个订单: BSO2025122400025
+[create_orders] ✓ 订单 BSO2025122400025 完成
+[create_orders] 正在等待第 3/3 个订单: BSO2025122400026
+[create_orders] ✓ 订单 BSO2025122400026 完成
+[create_orders] 所有订单已完成，共收集 3 个报文
+实验记录本========================create_orders========================
+返回报文数量: 3
+报文 1: orderCode=BSO2025122400024, status=30
+报文 2: orderCode=BSO2025122400025, status=30
+报文 3: orderCode=BSO2025122400026, status=30
+========================
+```
+
+## 关键改进
+
+1. ✅ **等待所有订单**：不再只等待第一个订单，而是遍历所有 orderCode
+2. ✅ **收集完整报文**：每个订单的完整推送报文都被保存在 `reports` 数组中
+3. ✅ **详细日志**：清晰显示正在等待哪个订单，以及完成情况
+4. ✅ **错误处理**：即使某个订单失败，也会记录其状态信息
+5. ✅ **统一格式**：返回的 JSON 格式便于后续处理和分析

unilabos/devices/workstation/bioyond_studio/bioyond_cell/20260113_JSON配置迁移经验.md

@@ -0,0 +1,204 @@
+# BioyondCellWorkstation JSON 配置迁移经验总结
+
+**日期**: 2026-01-13  
+**目的**: 从 `config.py` 迁移到 JSON 配置文件
+
+---
+
+## 问题背景
+
+原系统通过 `config.py` 管理配置，导致：
+1. HTTP 服务重复启动（父类 `BioyondWorkstation` 和子类都启动）
+2. 配置分散在代码中，不便于管理
+3. 无法通过 JSON 统一配置所有参数
+
+---
+
+## 解决方案：嵌套配置结构
+
+### JSON 结构设计
+
+**正确示例** (嵌套在 `config` 中):
+```json
+{
+  "nodes": [{
+    "id": "bioyond_cell_workstation",
+    "config": {
+      "deck": {...},
+      "protocol_type": [],
+      "bioyond_config": {
+        "api_host": "http://172.16.11.219:44388",
+        "api_key": "8A819E5C",
+        "timeout": 30,
+        "HTTP_host": "172.16.11.206",
+        "HTTP_port": 8080,
+        "debug_mode": false,
+        "material_type_mappings": {...},
+        "warehouse_mapping": {...},
+        "solid_liquid_mappings": {...}
+      }
+    },
+    "data": {}
+  }]
+}
+```
+
+**关键点**：
+- ✅ `bioyond_config` 放在 `config` 中（会传递到 `__init__`）
+- ❌ **不要**放在 `data` 中（`data` 是运行时状态，不会传递）
+
+---
+
+## Python 代码适配
+
+### 1. 修改 `BioyondCellWorkstation.__init__` 签名
+
+**文件**: `bioyond_cell_workstation.py`
+
+```python
+def __init__(self, bioyond_config: dict = None, deck=None, protocol_type=None, **kwargs):
+    """
+    Args:
+        bioyond_config: 从 JSON 加载的配置字典
+        deck: Deck 配置
+        protocol_type: 协议类型
+    """
+    # 验证配置
+    if bioyond_config is None:
+        raise ValueError("需要 bioyond_config 参数")
+    
+    # 保存配置
+    self.bioyond_config = bioyond_config
+    
+    # 设置 HTTP 服务去重标志
+    self.bioyond_config["_disable_auto_http_service"] = True
+    
+    # 调用父类
+    super().__init__(bioyond_config=self.bioyond_config, deck=deck, **kwargs)
+```
+
+### 2. 替换全局变量引用
+
+**修改前**（使用全局变量）:
+```python
+from config import MATERIAL_TYPE_MAPPINGS, WAREHOUSE_MAPPING
+
+def create_sample(self, board_type, ...):
+    carrier_type_id = MATERIAL_TYPE_MAPPINGS[board_type][1]
+    location_id = WAREHOUSE_MAPPING[warehouse_name]["site_uuids"][location_code]
+```
+
+**修改后**（从配置读取）:
+```python
+def create_sample(self, board_type, ...):
+    carrier_type_id = self.bioyond_config['material_type_mappings'][board_type][1]
+    location_id = self.bioyond_config['warehouse_mapping'][warehouse_name]["site_uuids"][location_code]
+```
+
+### 3. 修复父类配置访问
+
+在 `station.py` 中安全访问配置默认值：
+
+```python
+# 修改前（会 KeyError）
+self._http_service_config = {
+    "host": bioyond_config.get("http_service_host", HTTP_SERVICE_CONFIG["http_service_host"])
+}
+
+# 修改后（安全访问）
+self._http_service_config = {
+    "host": bioyond_config.get("http_service_host", HTTP_SERVICE_CONFIG.get("http_service_host", ""))
+}
+```
+
+---
+
+## 常见陷阱
+
+### ❌ 错误1：将配置放在 `data` 字段
+```json
+"config": {"deck": {...}},
+"data": {"bioyond_config": {...}}  // ❌ 不会传递到 __init__
+```
+
+### ❌ 错误2：扁平化配置（已废弃方案）
+虽然扁平化也能工作，但不推荐：
+```json
+"config": {
+  "deck": {...},
+  "api_host": "...",     // ❌ 不够清晰
+  "api_key": "...",
+  "HTTP_host": "..."
+}
+```
+
+### ❌ 错误3：忘记替换全局变量引用
+代码中直接使用 `MATERIAL_TYPE_MAPPINGS` 等全局变量会导致 `NameError`。
+
+---
+
+## 云端同步注意事项
+
+使用 `--upload_registry` 时，云端配置可能覆盖本地配置：
+- 首次上传时确保 JSON 完整
+- 或使用新的 `ak/sk` 避免旧配置干扰
+- 调试时可暂时移除 `--upload_registry` 参数
+
+---
+
+## 验证清单
+
+启动成功后应看到：
+```
+✅ 从 JSON 配置加载 bioyond_config 成功
+   API Host: http://...
+   HTTP Service: ...
+✅ BioyondCellWorkstation 初始化完成
+Loaded ResourceTreeSet with ... nodes
+```
+
+运行时不应出现：
+- ❌ `NameError: name 'MATERIAL_TYPE_MAPPINGS' is not defined`
+- ❌ `KeyError: 'http_service_host'`
+- ❌ `bioyond_config 缺少必需参数`
+
+---
+
+## 调试经验
+
+1. **添加调试日志**查看参数传递链路：
+   - `graphio.py`: JSON 加载后的 config 内容
+   - `initialize_device.py`: `device_config.res_content.config` 的键
+   - `bioyond_cell_workstation.py`: `__init__` 接收到的参数
+
+2. **config vs data 区别**：
+   - `config`: 初始化参数，传递给 `__init__`
+   - `data`: 运行时状态，不传递给 `__init__`
+
+3. **参数名必须匹配**：
+   - JSON 中的键名必须与 `__init__` 参数名完全一致
+
+4. **调试代码清理**：完成后记得删除调试日志（🔍 DEBUG 标记）
+
+---
+
+## 修改文件清单
+
+| 文件 | 修改内容 |
+|------|----------|
+| `yibin_electrolyte_config.json` | 创建嵌套 `config.bioyond_config` 结构 |
+| `bioyond_cell_workstation.py` | 修改 `__init__` 接收 `bioyond_config`，替换所有全局变量引用 |
+| `station.py` | 安全访问 `HTTP_SERVICE_CONFIG` 默认值 |
+
+---
+
+## 参考代码位置
+
+- JSON 配置示例: `yibin_electrolyte_config.json` L12-L353
+- `__init__` 实现: `bioyond_cell_workstation.py` L39-L94
+- 全局变量替换示例: `bioyond_cell_workstation.py` L2005, L1863, L1966
+- HTTP 服务配置: `station.py` L629-L634
+
+---
+
+**总结**: 使用嵌套结构将所有配置放在 `config.bioyond_config` 中，修改 `__init__` 直接接收该参数，并替换所有全局变量引用为 `self.bioyond_config` 访问。

unilabos/devices/workstation/bioyond_studio/bioyond_cell/20260113_配置迁移修改总结.md

@@ -0,0 +1,312 @@
+# BioyondCell 配置迁移修改总结
+
+**日期**: 2026-01-13  
+**目标**: 从 `config.py` 完全迁移到 JSON 配置，消除所有全局变量依赖
+
+---
+
+## 📋 修改概览
+
+本次修改完成了 BioyondCell 模块从 Python 配置文件到 JSON 配置的完整迁移，并清理了所有对 `config.py` 全局变量的依赖。
+
+### 核心成果
+
+- ✅ 完全移除对 `config.py` 的导入依赖
+- ✅ 使用嵌套 JSON 结构 `config.bioyond_config`
+- ✅ 修复 7 处 `bioyond_cell_workstation.py` 中的全局变量引用
+- ✅ 修复 3 处其他文件中的全局变量引用
+- ✅ HTTP 服务去重机制完善
+- ✅ 系统成功启动并正常运行
+
+---
+
+## 🔧 修改文件清单
+
+### 1. JSON 配置文件
+
+**文件**: `yibin_electrolyte_config.json`
+
+**修改**:
+- 采用嵌套结构将所有配置放在 `config.bioyond_config` 中
+- 包含：`api_host`, `api_key`, `HTTP_host`, `HTTP_port`, `material_type_mappings`, `warehouse_mapping`, `solid_liquid_mappings` 等
+
+**示例结构**:
+```json
+{
+  "nodes": [{
+    "id": "bioyond_cell_workstation",
+    "config": {
+      "deck": {...},
+      "protocol_type": [],
+      "bioyond_config": {
+        "api_host": "http://172.16.11.219:44388",
+        "api_key": "8A819E5C",
+        "HTTP_host": "172.16.11.206",
+        "HTTP_port": 8080,
+        "material_type_mappings": {...},
+        "warehouse_mapping": {...},
+        "solid_liquid_mappings": {...}
+      }
+    }
+  }]
+}
+```
+
+---
+
+### 2. bioyond_cell_workstation.py
+
+**位置**: `unilabos/devices/workstation/bioyond_studio/bioyond_cell/bioyond_cell_workstation.py`
+
+#### 修改 A: `__init__` 方法签名 (L39-99)
+
+**修改前**:
+```python
+def __init__(self, deck=None, protocol_type=None, **kwargs):
+    # 从 kwargs 收集配置字段
+    self.bioyond_config = {}
+    for field in bioyond_field_names:
+        if field in kwargs:
+            self.bioyond_config[field] = kwargs.pop(field)
+```
+
+**修改后**:
+```python
+def __init__(self, bioyond_config: dict = None, deck=None, protocol_type=None, **kwargs):
+    """直接接收 bioyond_config 参数"""
+    if bioyond_config is None:
+        raise ValueError("需要 bioyond_config 参数")
+    
+    self.bioyond_config = bioyond_config
+    
+    # 设置 HTTP 服务去重标志
+    self.bioyond_config["_disable_auto_http_service"] = True
+    
+    super().__init__(bioyond_config=self.bioyond_config, deck=deck, **kwargs)
+```
+
+#### 修改 B: 替换全局变量引用 (7 处)
+
+| 位置 | 原代码 | 修改后 |
+|------|--------|--------|
+| L2005 | `MATERIAL_TYPE_MAPPINGS[board_type][1]` | `self.bioyond_config['material_type_mappings'][board_type][1]` |
+| L2006 | `MATERIAL_TYPE_MAPPINGS[bottle_type][1]` | `self.bioyond_config['material_type_mappings'][bottle_type][1]` |
+| L2009 | `WAREHOUSE_MAPPING` | `self.bioyond_config['warehouse_mapping']` |
+| L2013 | `WAREHOUSE_MAPPING[warehouse_name]` | `self.bioyond_config['warehouse_mapping'][warehouse_name]` |
+| L2017 | `WAREHOUSE_MAPPING[warehouse_name]["site_uuids"]` | `self.bioyond_config['warehouse_mapping'][warehouse_name]["site_uuids"]` |
+| L1863 | `SOLID_LIQUID_MAPPINGS.get(material_name)` | `self.bioyond_config.get('solid_liquid_mappings', {}).get(material_name)` |
+| L1966, L1976 | `MATERIAL_TYPE_MAPPINGS.items()` | `self.bioyond_config['material_type_mappings'].items()` |
+
+---
+
+### 3. station.py
+
+**位置**: `unilabos/devices/workstation/bioyond_studio/station.py`
+
+#### 修改 A: 删除 config 导入 (L26-28)
+
+**修改前**:
+```python
+from unilabos.devices.workstation.bioyond_studio.config import (
+    API_CONFIG, WORKFLOW_MAPPINGS, MATERIAL_TYPE_MAPPINGS, WAREHOUSE_MAPPING, HTTP_SERVICE_CONFIG
+)
+```
+
+**修改后**:
+```python
+# 已删除此导入
+```
+
+#### 修改 B: `_create_communication_module` 方法 (L691-702)
+
+**修改前**:
+```python
+def _create_communication_module(self, config: Optional[Dict[str, Any]] = None) -> None:
+    default_config = {
+        **API_CONFIG,
+        "workflow_mappings": WORKFLOW_MAPPINGS,
+        "material_type_mappings": MATERIAL_TYPE_MAPPINGS,
+        "warehouse_mapping": WAREHOUSE_MAPPING
+    }
+    if config:
+        self.bioyond_config = {**default_config, **config}
+    else:
+        self.bioyond_config = default_config
+```
+
+**修改后**:
+```python
+def _create_communication_module(self, config: Optional[Dict[str, Any]] = None) -> None:
+    """创建Bioyond通信模块"""
+    # 使用传入的 config 参数（来自 bioyond_config）
+    # 不再依赖全局变量 API_CONFIG 等
+    if config:
+        self.bioyond_config = config
+    else:
+        # 如果没有传入配置，创建空配置（用于测试或兼容性）
+        self.bioyond_config = {}
+    
+    self.hardware_interface = BioyondV1RPC(self.bioyond_config)
+```
+
+#### 修改 C: HTTP 服务配置 (L627-632)
+
+**修改前**:
+```python
+self._http_service_config = {
+    "host": bioyond_config.get("http_service_host", HTTP_SERVICE_CONFIG.get("http_service_host", "")),
+    "port": bioyond_config.get("http_service_port", HTTP_SERVICE_CONFIG.get("http_service_port", 0))
+}
+```
+
+**修改后**:
+```python
+self._http_service_config = {
+    "host": bioyond_config.get("http_service_host", bioyond_config.get("HTTP_host", "")),
+    "port": bioyond_config.get("http_service_port", bioyond_config.get("HTTP_port", 0))
+}
+```
+
+---
+
+### 4. bioyond_rpc.py
+
+**位置**: `unilabos/devices/workstation/bioyond_studio/bioyond_rpc.py`
+
+#### 修改 A: 删除 config 导入 (L12)
+
+**修改前**:
+```python
+from unilabos.devices.workstation.bioyond_studio.config import LOCATION_MAPPING
+```
+
+**修改后**:
+```python
+# 已删除此导入
+```
+
+#### 修改 B: `material_outbound` 方法 (L278-280)
+
+**修改前**:
+```python
+def material_outbound(self, material_id: str, location_name: str, quantity: int) -> dict:
+    """指定库位出库物料（通过库位名称）"""
+    location_id = LOCATION_MAPPING.get(location_name, location_name)
+```
+
+**修改后**:
+```python
+def material_outbound(self, material_id: str, location_name: str, quantity: int) -> dict:
+    """指定库位出库物料（通过库位名称）"""
+    # location_name 参数实际上应该直接是 location_id (UUID)
+    location_id = location_name
+```
+
+**说明**: `LOCATION_MAPPING` 在 `config-0113.py` 中本来就是空字典 `{}`，所以直接使用 `location_name` 逻辑等价。
+
+---
+
+## 🎯 关键设计决策
+
+### 1. 嵌套 vs 扁平配置
+
+**选择**: 嵌套结构 `config.bioyond_config`
+
+**理由**:
+- ✅ 语义清晰，配置分组明确
+- ✅ 参数传递直观，直接对应 `__init__` 参数
+- ✅ 易于维护，不需要硬编码字段列表
+- ✅ 符合 UniLab 设计模式
+
+### 2. HTTP 服务去重
+
+**实现**: 子类设置 `_disable_auto_http_service` 标志
+
+```python
+# bioyond_cell_workstation.py
+self.bioyond_config["_disable_auto_http_service"] = True
+
+# station.py (post_init)
+if self.bioyond_config.get("_disable_auto_http_service"):
+    logger.info("子类已自行管理HTTP服务，跳过自动启动")
+    return
+```
+
+### 3. 全局变量替换策略
+
+**原则**: 所有配置从 `self.bioyond_config` 获取
+
+**模式**:
+```python
+# 修改前
+from config import MATERIAL_TYPE_MAPPINGS
+carrier_type_id = MATERIAL_TYPE_MAPPINGS[board_type][1]
+
+# 修改后
+carrier_type_id = self.bioyond_config['material_type_mappings'][board_type][1]
+```
+
+---
+
+## ✅ 验证结果
+
+### 启动成功日志
+```
+✅ 从 JSON 配置加载 bioyond_config 成功
+   API Host: http://172.16.11.219:44388
+   HTTP Service: 172.16.11.206:8080
+🔧 已设置 _disable_auto_http_service 标志，防止 HTTP 服务重复启动
+✅ BioyondCellWorkstation 初始化完成
+Loaded ResourceTreeSet with 1 trees, 1785 total nodes
+```
+
+### 功能验证
+- ✅ 订单创建 (`create_orders_v2`)
+- ✅ 质量比计算
+- ✅ 物料转移 (`transfer_3_to_2_to_1`)
+- ✅ HTTP 报送接收 (step_finish, sample_finish, order_finish)
+- ✅ 等待机制 (`wait_for_order_finish`)
+- ✅ 仓库 UUID 映射
+- ✅ 物料类型映射
+
+---
+
+## 📚 相关文档
+
+- **配置迁移经验**: `2026-01-13_JSON配置迁移经验.md`
+- **任务清单**: `C:\Users\AndyXie\.gemini\antigravity\brain\...\task.md`
+- **实施计划**: `C:\Users\AndyXie\.gemini\antigravity\brain\...\implementation_plan.md`
+
+---
+
+## ⚠️ 注意事项
+
+### 其他工作站模块
+
+以下文件仍在使用 `config.py` 全局变量（未包含在本次修改中）:
+- `reaction_station.py` - 使用 `API_CONFIG`
+- `experiment.py` - 使用 `API_CONFIG`, `WORKFLOW_MAPPINGS`, `MATERIAL_TYPE_MAPPINGS`
+- `dispensing_station.py` - 使用 `API_CONFIG`, `WAREHOUSE_MAPPING`
+- `station.py` L176, L177, L529, L530 - 动态导入 `WAREHOUSE_MAPPING`
+
+**建议**: 后续可以统一迁移这些模块到 JSON 配置。
+
+### config.py 文件
+
+`config.py` 文件已恢复但**不再被 bioyond_cell 使用**。可以：
+- 保留作为其他模块的参考
+- 或者完全删除（如果其他模块也迁移完成）
+
+---
+
+## 🚀 下一步建议
+
+1. **清理调试代码** ✅ (已完成)
+2. **提交代码到 Git**
+3. **迁移其他工作站模块** (可选)
+4. **更新文档和启动脚本**
+
+---
+
+**修改完成日期**: 2026-01-13  
+**系统状态**: ✅ 稳定运行

unilabos/devices/workstation/bioyond_studio/bioyond_cell/批量出库模板使用说明.md

@@ -0,0 +1,157 @@
+# 批量出库 Excel 模板使用说明
+
+**文件**: `outbound_template.xlsx`  
+**用途**: 配合 `auto_batch_outbound_from_xlsx()` 方法进行批量出库操作  
+**API 端点**: `/api/lims/storage/auto-batch-out-bound`
+
+---
+
+## 📋 Excel 列说明
+
+| 列名 | 说明 | 示例 | 必填 |
+|------|------|------|------|
+| `locationId` | **库位 ID（UUID）** | `3a19da43-57b5-294f-d663-154a1cc32270` | ✅ 是 |
+| `warehouseId` | **仓库 ID 或名称** | `配液站内试剂仓库` | ✅ 是 |
+| `quantity` | **出库数量** | `1.0`, `2.0` | ✅ 是 |
+| `x` | **X 坐标（库位横向位置）** | `1`, `2`, `3` | ✅ 是 |
+| `y` | **Y 坐标（库位纵向位置）** | `1`, `2`, `3` | ✅ 是 |
+| `z` | **Z 坐标（库位层数/高度）** | `1`, `2`, `3` | ✅ 是 |
+| `备注说明` | 可选备注信息 | `配液站内试剂仓库-A01` | ❌ 否 |
+
+### 📐 坐标说明
+
+**x, y, z** 是库位在仓库内的**三维坐标**：
+
+```
+仓库（例如 WH4）
+├── Z=1（第1层/加样头面）
+│   ├── X=1, Y=1（位置 A）
+│   ├── X=2, Y=1（位置 B）
+│   ├── X=3, Y=1（位置 C）
+│   └── ...
+│
+└── Z=2（第2层/原液瓶面）
+    ├── X=1, Y=1（位置 A）
+    ├── X=2, Y=1（位置 B）
+    └── ...
+```
+
+- **warehouseId**: 指定哪个仓库（WH3, WH4, 配液站等）
+- **x, y, z**: 在该仓库内的三维坐标
+- **locationId**: 该坐标位置的唯一 UUID
+
+### 🎯 起点与终点
+
+**重要说明**：批量出库模板**只规定了出库的"起点"**（从哪里取物料），**没有指定"终点"**（放到哪里）。
+
+```
+出库流程：
+起点（Excel 指定） → ？终点（LIMS/工作流决定）
+    ↓
+locationId, x, y, z    → 由 LIMS 系统或当前工作流自动分配
+```
+
+**终点由以下方式确定：**
+- **LIMS 系统自动分配**：根据当前任务自动规划目标位置
+- **工作流预定义**：在创建出库任务时已绑定目标位置
+- **暂存区**：默认放到出库暂存区，等待下一步操作
+
+💡 **对比**：上料操作（`auto_feeding4to3`）则有 `targetWH` 参数可以指定目标仓库
+
+---
+
+## 🔍 如何获取 UUID？
+
+### 方法 1：从配置文件获取
+
+参考 `yibin_electrolyte_config.json` 中的 `warehouse_mapping`：
+
+```json
+{
+  "warehouse_mapping": {
+    "配液站内试剂仓库": {
+      "site_uuids": {
+        "A01": "3a19da43-57b5-294f-d663-154a1cc32270",
+        "B01": "3a19da43-57b5-7394-5f49-54efe2c9bef2",
+        "C01": "3a19da43-57b5-5e75-552f-8dbd0ad1075f"
+      }
+    },
+    "手动堆栈": {
+      "site_uuids": {
+        "A01": "3a19deae-2c7a-36f5-5e41-02c5b66feaea",
+        "A02": "3a19deae-2c7a-dc6d-c41e-ef285d946cfe"
+      }
+    }
+  }
+}
+```
+
+### 方法 2：通过 API 查询
+
+```python
+material_info = hardware_interface.material_id_query(workflow_id)
+locations = material_info.get("locations", [])
+```
+
+---
+
+## 📝 填写示例
+
+### 示例 1：从配液站内试剂仓库出库
+
+| locationId | warehouseId | quantity | x | y | z | 备注说明 |
+|------------|-------------|----------|---|---|---|----------|
+| `3a19da43-57b5-294f-d663-154a1cc32270` | 配液站内试剂仓库 | 1 | 1 | 1 | 1 | A01 位置 |
+| `3a19da43-57b5-7394-5f49-54efe2c9bef2` | 配液站内试剂仓库 | 2 | 2 | 1 | 1 | B01 位置 |
+
+### 示例 2：从手动堆栈出库
+
+| locationId | warehouseId | quantity | x | y | z | 备注说明 |
+|------------|-------------|----------|---|---|---|----------|
+| `3a19deae-2c7a-36f5-5e41-02c5b66feaea` | 手动堆栈 | 1 | 1 | 1 | 1 | A01 |
+| `3a19deae-2c7a-dc6d-c41e-ef285d946cfe` | 手动堆栈 | 1 | 1 | 2 | 1 | A02 |
+
+---
+
+## 💻 使用方法
+
+```python
+from bioyond_cell_workstation import BioyondCellWorkstation
+
+# 初始化工作站
+workstation = BioyondCellWorkstation(config=config, deck=deck)
+
+# 调用批量出库方法
+result = workstation.auto_batch_outbound_from_xlsx(
+    xlsx_path="outbound_template.xlsx"
+)
+```
+
+---
+
+## ⚠️ 注意事项
+
+1. **locationId 必须是有效的 UUID**，不能使用库位名称
+2. **x, y, z 坐标必须与 locationId 对应**，表示该库位在仓库内的位置
+3. **quantity 必须是数字**，可以是整数或浮点数
+4. Excel 文件必须包含表头行
+5. 空行会被自动跳过
+6. 确保 UUID 与实际库位对应，否则 API 会报错
+
+---
+
+## 📚 相关文件
+
+- **配置文件**: `yibin_electrolyte_config.json`
+- **Python 代码**: `bioyond_cell_workstation.py` (L630-695)
+- **生成脚本**: `create_outbound_template.py`
+- **上料模板**: `material_template.xlsx`
+
+---
+
+## 🔄 重新生成模板
+
+```bash
+conda activate newunilab
+python create_outbound_template.py
+```

unilabos/devices/workstation/bioyond_studio/bioyond_rpc.py

@@ -9,7 +9,7 @@ from datetime import datetime, timezone
 from unilabos.device_comms.rpc import BaseRequest
 from typing import Optional, List, Dict, Any
 import json
-from unilabos.devices.workstation.bioyond_studio.config import LOCATION_MAPPING
+
 
 
 class SimpleLogger:
@@ -49,6 +49,14 @@ class BioyondV1RPC(BaseRequest):
         self.config = config
         self.api_key = config["api_key"]
         self.host = config["api_host"]
+
+        # 初始化 location_mapping
+        # 直接从 warehouse_mapping 构建，确保数据源所谓的单一和结构化
+        self.location_mapping = {}
+        warehouse_mapping = self.config.get("warehouse_mapping", {})
+        for warehouse_name, warehouse_config in warehouse_mapping.items():
+            if "site_uuids" in warehouse_config:
+                self.location_mapping.update(warehouse_config["site_uuids"])
         self._logger = SimpleLogger()
         self.material_cache = {}
         self._load_material_cache()
@@ -176,7 +184,40 @@ class BioyondV1RPC(BaseRequest):
             return {}
 
         print(f"add material data: {response['data']}")
-        return response.get("data", {})
+
+        # 自动更新缓存
+        data = response.get("data", {})
+        if data:
+            if isinstance(data, str):
+                # 如果返回的是字符串，通常是ID
+                mat_id = data
+                name = params.get("name")
+            else:
+                # 如果返回的是字典，尝试获取name和id
+                name = data.get("name") or params.get("name")
+                mat_id = data.get("id")
+
+            if name and mat_id:
+                self.material_cache[name] = mat_id
+                print(f"已自动更新缓存: {name} -> {mat_id}")
+
+            # 处理返回数据中的 details (如果有)
+            # 有些 API 返回结构可能直接包含 details，或者在 data 字段中
+            details = data.get("details", []) if isinstance(data, dict) else []
+            if not details and isinstance(data, dict):
+                 details = data.get("detail", [])
+
+            if details:
+                for detail in details:
+                    d_name = detail.get("name")
+                    # 尝试从不同字段获取 ID
+                    d_id = detail.get("id") or detail.get("detailMaterialId")
+
+                    if d_name and d_id:
+                        self.material_cache[d_name] = d_id
+                        print(f"已自动更新 detail 缓存: {d_name} -> {d_id}")
+
+        return data
 
     def query_matial_type_id(self, data) -> list:
         """查找物料typeid"""
@@ -203,7 +244,7 @@ class BioyondV1RPC(BaseRequest):
             params={
                 "apiKey": self.api_key,
                 "requestTime": self.get_current_time_iso8601(),
-                "data": {},
+                "data": 0,
             })
         if not response or response['code'] != 1:
             return []
@@ -273,11 +314,19 @@ class BioyondV1RPC(BaseRequest):
 
         if not response or response['code'] != 1:
             return {}
+
+        # 自动更新缓存 - 移除被删除的物料
+        for name, mid in list(self.material_cache.items()):
+            if mid == material_id:
+                del self.material_cache[name]
+                print(f"已从缓存移除物料: {name}")
+                break
+
         return response.get("data", {})
 
     def material_outbound(self, material_id: str, location_name: str, quantity: int) -> dict:
         """指定库位出库物料（通过库位名称）"""
-        location_id = LOCATION_MAPPING.get(location_name, location_name)
+        location_id = self.location_mapping.get(location_name, location_name)
 
         params = {
             "materialId": material_id,
@@ -1103,6 +1152,10 @@ class BioyondV1RPC(BaseRequest):
                     for detail_material in detail_materials:
                         detail_name = detail_material.get("name")
                         detail_id = detail_material.get("detailMaterialId")
+                        if not detail_id:
+                            # 尝试其他可能的字段
+                            detail_id = detail_material.get("id")
+
                         if detail_name and detail_id:
                             self.material_cache[detail_name] = detail_id
                             print(f"加载detail材料: {detail_name} -> ID: {detail_id}")
@@ -1123,6 +1176,14 @@ class BioyondV1RPC(BaseRequest):
             print(f"从缓存找到材料: {material_name_or_id} -> ID: {material_id}")
             return material_id
 
+        # 如果缓存中没有，尝试刷新缓存
+        print(f"缓存中未找到材料 '{material_name_or_id}'，尝试刷新缓存...")
+        self.refresh_material_cache()
+        if material_name_or_id in self.material_cache:
+            material_id = self.material_cache[material_name_or_id]
+            print(f"刷新缓存后找到材料: {material_name_or_id} -> ID: {material_id}")
+            return material_id
+
         print(f"警告: 未在缓存中找到材料名称 '{material_name_or_id}'，将使用原值")
         return material_name_or_id
 

unilabos/devices/workstation/bioyond_studio/config.py

@@ -1,142 +0,0 @@
-# config.py
-"""
-配置文件 - 包含所有配置信息和映射关系
-"""
-
-# API配置
-API_CONFIG = {
-    "api_key": "",
-    "api_host": ""
-}
-
-# 工作流映射配置
-WORKFLOW_MAPPINGS = {
-    "reactor_taken_out": "",
-    "reactor_taken_in": "",
-    "Solid_feeding_vials": "",
-    "Liquid_feeding_vials(non-titration)": "",
-    "Liquid_feeding_solvents": "",
-    "Liquid_feeding(titration)": "",
-    "liquid_feeding_beaker": "",
-    "Drip_back": "",
-}
-
-# 工作流名称到DisplaySectionName的映射
-WORKFLOW_TO_SECTION_MAP = {
-    'reactor_taken_in': '反应器放入',
-    'liquid_feeding_beaker': '液体投料-烧杯',
-    'Liquid_feeding_vials(non-titration)': '液体投料-小瓶（非滴定）',
-    'Liquid_feeding_solvents': '液体投料-溶剂',
-    'Solid_feeding_vials': '固体投料-小瓶',
-    'Liquid_feeding(titration)': '液体投料-滴定',
-    'reactor_taken_out': '反应器取出'
-}
-
-# 库位映射配置
-WAREHOUSE_MAPPING = {
-    "粉末堆栈": {
-        "uuid": "",
-        "site_uuids": {
-            # 样品板
-            "A1": "3a14198e-6929-31f0-8a22-0f98f72260df",
-            "A2": "3a14198e-6929-4379-affa-9a2935c17f99",
-            "A3": "3a14198e-6929-56da-9a1c-7f5fbd4ae8af",
-            "A4": "3a14198e-6929-5e99-2b79-80720f7cfb54",
-            "B1": "3a14198e-6929-f525-9a1b-1857552b28ee",
-            "B2": "3a14198e-6929-bf98-0fd5-26e1d68bf62d",
-            "B3": "3a14198e-6929-2d86-a468-602175a2b5aa",
-            "B4": "3a14198e-6929-1a98-ae57-e97660c489ad",
-            # 分装板
-            "C1": "3a14198e-6929-46fe-841e-03dd753f1e4a",
-            "C2": "3a14198e-6929-1bc9-a9bd-3b7ca66e7f95",
-            "C3": "3a14198e-6929-72ac-32ce-9b50245682b8",
-            "C4": "3a14198e-6929-3bd8-e6c7-4a9fd93be118",
-            "D1": "3a14198e-6929-8a0b-b686-6f4a2955c4e2",
-            "D2": "3a14198e-6929-dde1-fc78-34a84b71afdf",
-            "D3": "3a14198e-6929-a0ec-5f15-c0f9f339f963",
-            "D4": "3a14198e-6929-7ac8-915a-fea51cb2e884"
-        }
-    },
-    "溶液堆栈": {
-        "uuid": "",
-        "site_uuids": {
-            "A1": "3a14198e-d724-e036-afdc-2ae39a7f3383",
-            "A2": "3a14198e-d724-afa4-fc82-0ac8a9016791",
-            "A3": "3a14198e-d724-ca48-bb9e-7e85751e55b6",
-            "A4": "3a14198e-d724-df6d-5e32-5483b3cab583",
-            "B1": "3a14198e-d724-d818-6d4f-5725191a24b5",
-            "B2": "3a14198e-d724-be8a-5e0b-012675e195c6",
-            "B3": "3a14198e-d724-cc1e-5c2c-228a130f40a8",
-            "B4": "3a14198e-d724-1e28-c885-574c3df468d0",
-            "C1": "3a14198e-d724-b5bb-adf3-4c5a0da6fb31",
-            "C2": "3a14198e-d724-ab4e-48cb-817c3c146707",
-            "C3": "3a14198e-d724-7f18-1853-39d0c62e1d33",
-            "C4": "3a14198e-d724-28a2-a760-baa896f46b66",
-            "D1": "3a14198e-d724-d378-d266-2508a224a19f",
-            "D2": "3a14198e-d724-f56e-468b-0110a8feb36a",
-            "D3": "3a14198e-d724-0cf1-dea9-a1f40fe7e13c",
-            "D4": "3a14198e-d724-0ddd-9654-f9352a421de9"
-        }
-    },
-    "试剂堆栈": {
-        "uuid": "",
-        "site_uuids": {
-            "A1": "3a14198c-c2cf-8b40-af28-b467808f1c36",
-            "A2": "3a14198c-c2d0-f3e7-871a-e470d144296f",
-            "A3": "3a14198c-c2d0-dc7d-b8d0-e1d88cee3094",
-            "A4": "3a14198c-c2d0-2070-efc8-44e245f10c6f",
-            "B1": "3a14198c-c2d0-354f-39ad-642e1a72fcb8",
-            "B2": "3a14198c-c2d0-1559-105d-0ea30682cab4",
-            "B3": "3a14198c-c2d0-725e-523d-34c037ac2440",
-            "B4": "3a14198c-c2d0-efce-0939-69ca5a7dfd39"
-        }
-    }
-}
-
-# 物料类型配置
-MATERIAL_TYPE_MAPPINGS = {
-    "烧杯": ("BIOYOND_PolymerStation_1FlaskCarrier", "3a14196b-24f2-ca49-9081-0cab8021bf1a"),
-    "试剂瓶": ("BIOYOND_PolymerStation_1BottleCarrier", ""),
-    "样品板": ("BIOYOND_PolymerStation_6StockCarrier", "3a14196e-b7a0-a5da-1931-35f3000281e9"),
-    "分装板": ("BIOYOND_PolymerStation_6VialCarrier", "3a14196e-5dfe-6e21-0c79-fe2036d052c4"),
-    "样品瓶": ("BIOYOND_PolymerStation_Solid_Stock", "3a14196a-cf7d-8aea-48d8-b9662c7dba94"),
-    "90%分装小瓶": ("BIOYOND_PolymerStation_Solid_Vial", "3a14196c-cdcf-088d-dc7d-5cf38f0ad9ea"),
-    "10%分装小瓶": ("BIOYOND_PolymerStation_Liquid_Vial", "3a14196c-76be-2279-4e22-7310d69aed68"),
-}
-
-# 步骤参数配置（各工作流的步骤UUID）
-WORKFLOW_STEP_IDS = {
-    "reactor_taken_in": {
-        "config": ""
-    },
-    "liquid_feeding_beaker": {
-        "liquid": "",
-        "observe": ""
-    },
-    "liquid_feeding_vials_non_titration": {
-        "liquid": "",
-        "observe": ""
-    },
-    "liquid_feeding_solvents": {
-        "liquid": "",
-        "observe": ""
-    },
-    "solid_feeding_vials": {
-        "feeding": "",
-        "observe": ""
-    },
-    "liquid_feeding_titration": {
-        "liquid": "",
-        "observe": ""
-    },
-    "drip_back": {
-        "liquid": "",
-        "observe": ""
-    }
-}
-
-LOCATION_MAPPING = {}
-
-ACTION_NAMES = {}
-
-HTTP_SERVICE_CONFIG = {}

unilabos/devices/workstation/bioyond_studio/config.py.deprecated

@@ -0,0 +1,329 @@
+# config.py
+"""
+Bioyond工作站配置文件
+包含API配置、工作流映射、物料类型映射、仓库库位映射等所有配置信息
+"""
+
+from unilabos.resources.bioyond.decks import BIOYOND_PolymerReactionStation_Deck
+
+# ============================================================================
+# 基础配置
+# ============================================================================
+
+# API配置
+API_CONFIG = {
+    "api_key": "DE9BDDA0",
+    "api_host": "http://192.168.1.200:44402"
+}
+
+# HTTP 报送服务配置
+HTTP_SERVICE_CONFIG = {
+    "http_service_host": "127.0.0.1",  # 监听地址
+    "http_service_port": 8080,        # 监听端口
+}
+
+# Deck配置 - 反应站工作台配置
+DECK_CONFIG = BIOYOND_PolymerReactionStation_Deck(setup=True)
+
+# ============================================================================
+# 工作流配置
+# ============================================================================
+
+# 工作流ID映射
+WORKFLOW_MAPPINGS = {
+    "reactor_taken_out": "3a16081e-4788-ca37-eff4-ceed8d7019d1",
+    "reactor_taken_in": "3a160df6-76b3-0957-9eb0-cb496d5721c6",
+    "Solid_feeding_vials": "3a160877-87e7-7699-7bc6-ec72b05eb5e6",
+    "Liquid_feeding_vials(non-titration)": "3a167d99-6158-c6f0-15b5-eb030f7d8e47",
+    "Liquid_feeding_solvents": "3a160824-0665-01ed-285a-51ef817a9046",
+    "Liquid_feeding(titration)": "3a16082a-96ac-0449-446a-4ed39f3365b6",
+    "liquid_feeding_beaker": "3a16087e-124f-8ddb-8ec1-c2dff09ca784",
+    "Drip_back": "3a162cf9-6aac-565a-ddd7-682ba1796a4a",
+}
+
+# 工作流名称到显示名称的映射
+WORKFLOW_TO_SECTION_MAP = {
+    'reactor_taken_in': '反应器放入',
+    'reactor_taken_out': '反应器取出',
+    'Solid_feeding_vials': '固体投料-小瓶',
+    'Liquid_feeding_vials(non-titration)': '液体投料-小瓶（非滴定）',
+    'Liquid_feeding_solvents': '液体投料-溶剂',
+    'Liquid_feeding(titration)': '液体投料-滴定',
+    'liquid_feeding_beaker': '液体投料-烧杯',
+    'Drip_back': '液体回滴'
+}
+
+# 工作流步骤ID配置
+WORKFLOW_STEP_IDS = {
+    "reactor_taken_in": {
+        "config": "60a06f85-c5b3-29eb-180f-4f62dd7e2154"
+    },
+    "liquid_feeding_beaker": {
+        "liquid": "6808cda7-fee7-4092-97f0-5f9c2ffa60e3",
+        "observe": "1753c0de-dffc-4ee6-8458-805a2e227362"
+    },
+    "liquid_feeding_vials_non_titration": {
+        "liquid": "62ea6e95-3d5d-43db-bc1e-9a1802673861",
+        "observe": "3a167d99-6172-b67b-5f22-a7892197142e"
+    },
+    "liquid_feeding_solvents": {
+        "liquid": "1fcea355-2545-462b-b727-350b69a313bf",
+        "observe": "0553dfb3-9ac5-4ace-8e00-2f11029919a8"
+    },
+    "solid_feeding_vials": {
+        "feeding": "f7ae7448-4f20-4c1d-8096-df6fbadd787a",
+        "observe": "263c7ed5-7277-426b-bdff-d6fbf77bcc05"
+    },
+    "liquid_feeding_titration": {
+        "liquid": "a00ec41b-e666-4422-9c20-bfcd3cd15c54",
+        "observe": "ac738ff6-4c58-4155-87b1-d6f65a2c9ab5"
+    },
+    "drip_back": {
+        "liquid": "371be86a-ab77-4769-83e5-54580547c48a",
+        "observe": "ce024b9d-bd20-47b8-9f78-ca5ce7f44cf1"
+    }
+}
+
+# 工作流动作名称配置
+ACTION_NAMES = {
+    "reactor_taken_in": {
+        "config": "通量-配置",
+        "stirring": "反应模块-开始搅拌"
+    },
+    "solid_feeding_vials": {
+        "feeding": "粉末加样模块-投料",
+        "observe": "反应模块-观察搅拌结果"
+    },
+    "liquid_feeding_vials_non_titration": {
+        "liquid": "稀释液瓶加液位-液体投料",
+        "observe": "反应模块-滴定结果观察"
+    },
+    "liquid_feeding_solvents": {
+        "liquid": "试剂AB放置位-试剂吸液分液",
+        "observe": "反应模块-观察搅拌结果"
+    },
+    "liquid_feeding_titration": {
+        "liquid": "稀释液瓶加液位-稀释液吸液分液",
+        "observe": "反应模块-滴定结果观察"
+    },
+    "liquid_feeding_beaker": {
+        "liquid": "烧杯溶液放置位-烧杯吸液分液",
+        "observe": "反应模块-观察搅拌结果"
+    },
+    "drip_back": {
+        "liquid": "试剂AB放置位-试剂吸液分液",
+        "observe": "反应模块-向下滴定结果观察"
+    }
+}
+
+# ============================================================================
+# 仓库配置
+# ============================================================================
+# 说明:
+# - 出库和入库操作都需要UUID
+WAREHOUSE_MAPPING = {
+    # ========== 反应站仓库 ==========
+
+    # 堆栈1左 - 反应站左侧堆栈 (4行×4列=16个库位, A01～D04)
+    "堆栈1左": {
+        "uuid": "3a14aa17-0d49-dce4-486e-4b5c85c8b366",
+        "site_uuids": {
+            "A01": "3a14aa17-0d49-11d7-a6e1-f236b3e5e5a3",
+            "A02": "3a14aa17-0d49-4bc5-8836-517b75473f5f",
+            "A03": "3a14aa17-0d49-c2bc-6222-5cee8d2d94f8",
+            "A04": "3a14aa17-0d49-3ce2-8e9a-008c38d116fb",
+            "B01": "3a14aa17-0d49-f49c-6b66-b27f185a3b32",
+            "B02": "3a14aa17-0d49-cf46-df85-a979c9c9920c",
+            "B03": "3a14aa17-0d49-7698-4a23-f7ffb7d48ba3",
+            "B04": "3a14aa17-0d49-1231-99be-d5870e6478e9",
+            "C01": "3a14aa17-0d49-be34-6fae-4aed9d48b70b",
+            "C02": "3a14aa17-0d49-11d7-0897-34921dcf6b7c",
+            "C03": "3a14aa17-0d49-9840-0bd5-9c63c1bb2c29",
+            "C04": "3a14aa17-0d49-8335-3bff-01da69ea4911",
+            "D01": "3a14aa17-0d49-2bea-c8e5-2b32094935d5",
+            "D02": "3a14aa17-0d49-cff4-e9e8-5f5f0bc1ef32",
+            "D03": "3a14aa17-0d49-4948-cb0a-78f30d1ca9b8",
+            "D04": "3a14aa17-0d49-fd2f-9dfb-a29b11e84099",
+        },
+    },
+
+    # 堆栈1右 - 反应站右侧堆栈 (4行×4列=16个库位, A05～D08)
+    "堆栈1右": {
+        "uuid": "3a14aa17-0d49-dce4-486e-4b5c85c8b366",
+        "site_uuids": {
+            "A05": "3a14aa17-0d49-2c61-edc8-72a8ca7192dd",
+            "A06": "3a14aa17-0d49-60c8-2b00-40b17198f397",
+            "A07": "3a14aa17-0d49-ec5b-0b75-634dce8eed25",
+            "A08": "3a14aa17-0d49-3ec9-55b3-f3189c4ec53d",
+            "B05": "3a14aa17-0d49-6a4e-abcf-4c113eaaeaad",
+            "B06": "3a14aa17-0d49-e3f6-2dd6-28c2e8194fbe",
+            "B07": "3a14aa17-0d49-11a6-b861-ee895121bf52",
+            "B08": "3a14aa17-0d49-9c7d-1145-d554a6e482f0",
+            "C05": "3a14aa17-0d49-45c4-7a34-5105bc3e2368",
+            "C06": "3a14aa17-0d49-867e-39ab-31b3fe9014be",
+            "C07": "3a14aa17-0d49-ec56-c4b4-39fd9b2131e7",
+            "C08": "3a14aa17-0d49-1128-d7d9-ffb1231c98c0",
+            "D05": "3a14aa17-0d49-e843-f961-ea173326a14b",
+            "D06": "3a14aa17-0d49-4d26-a985-f188359c4f8b",
+            "D07": "3a14aa17-0d49-223a-b520-bc092bb42fe0",
+            "D08": "3a14aa17-0d49-4fa3-401a-6a444e1cca22",
+        },
+    },
+
+    # 站内试剂存放堆栈
+    "站内试剂存放堆栈": {
+        "uuid": "3a14aa3b-9fab-9d8e-d1a7-828f01f51f0c",
+        "site_uuids": {
+            "A01": "3a14aa3b-9fab-adac-7b9c-e1ee446b51d5",
+            "A02": "3a14aa3b-9fab-ca72-febc-b7c304476c78"
+        }
+    },
+
+
+    # 测量小瓶仓库（测密度）
+    "测量小瓶仓库": {
+        "uuid": "3a15012f-705b-c0de-3f9e-950c205f9921",
+        "site_uuids": {
+            "A01": "3a15012f-705e-0524-3161-c523b5aebc97",
+            "A02": "3a15012f-705e-7cd1-32ab-ad4fd1ab75c8",
+            "A03": "3a15012f-705e-a5d6-edac-bdbfec236260",
+            "B01": "3a15012f-705e-e0ee-80e0-10a6b3fc500d",
+            "B02": "3a15012f-705e-e499-180d-de06d60d0b21",
+            "B03": "3a15012f-705e-eff6-63f1-09f742096b26"
+        }
+    },
+
+    # 站内Tip盒堆栈 - 用于存放枪头盒 (耗材)
+    "站内Tip盒堆栈": {
+        "uuid": "3a14aa3a-2d3c-b5c1-9ddf-7c4a957d459a",
+        "site_uuids": {
+            "A01": "3a14aa3a-2d3d-e700-411a-0ddf85e1f18a",
+            "A02": "3a14aa3a-2d3d-a7ce-099a-d5632fdafa24",
+            "A03": "3a14aa3a-2d3d-bdf6-a702-c60b38b08501",
+            "B01": "3a14aa3a-2d3d-d704-f076-2a8d5bc72cb8",
+            "B02": "3a14aa3a-2d3d-c350-2526-0778d173a5ac",
+            "B03": "3a14aa3a-2d3d-bc38-b356-f0de2e44e0c7"
+        }
+    },
+    # ========== 配液站仓库 ==========
+    "粉末堆栈": {
+        "uuid": "3a14198e-6928-121f-7ca6-88ad3ae7e6a0",
+        "site_uuids": {
+            "A01": "3a14198e-6929-31f0-8a22-0f98f72260df",
+            "A02": "3a14198e-6929-4379-affa-9a2935c17f99",
+            "A03": "3a14198e-6929-56da-9a1c-7f5fbd4ae8af",
+            "A04": "3a14198e-6929-5e99-2b79-80720f7cfb54",
+            "B01": "3a14198e-6929-f525-9a1b-1857552b28ee",
+            "B02": "3a14198e-6929-bf98-0fd5-26e1d68bf62d",
+            "B03": "3a14198e-6929-2d86-a468-602175a2b5aa",
+            "B04": "3a14198e-6929-1a98-ae57-e97660c489ad",
+            "C01": "3a14198e-6929-46fe-841e-03dd753f1e4a",
+            "C02": "3a14198e-6929-72ac-32ce-9b50245682b8",
+            "C03": "3a14198e-6929-8a0b-b686-6f4a2955c4e2",
+            "C04": "3a14198e-6929-a0ec-5f15-c0f9f339f963",
+            "D01": "3a14198e-6929-1bc9-a9bd-3b7ca66e7f95",
+            "D02": "3a14198e-6929-3bd8-e6c7-4a9fd93be118",
+            "D03": "3a14198e-6929-dde1-fc78-34a84b71afdf",
+            "D04": "3a14198e-6929-7ac8-915a-fea51cb2e884"
+        }
+    },
+    "溶液堆栈": {
+        "uuid": "3a14198e-d723-2c13-7d12-50143e190a23",
+        "site_uuids": {
+            "A01": "3a14198e-d724-e036-afdc-2ae39a7f3383",
+            "A02": "3a14198e-d724-d818-6d4f-5725191a24b5",
+            "A03": "3a14198e-d724-b5bb-adf3-4c5a0da6fb31",
+            "A04": "3a14198e-d724-d378-d266-2508a224a19f",
+            "B01": "3a14198e-d724-afa4-fc82-0ac8a9016791",
+            "B02": "3a14198e-d724-be8a-5e0b-012675e195c6",
+            "B03": "3a14198e-d724-ab4e-48cb-817c3c146707",
+            "B04": "3a14198e-d724-f56e-468b-0110a8feb36a",
+            "C01": "3a14198e-d724-ca48-bb9e-7e85751e55b6",
+            "C02": "3a14198e-d724-cc1e-5c2c-228a130f40a8",
+            "C03": "3a14198e-d724-7f18-1853-39d0c62e1d33",
+            "C04": "3a14198e-d724-0cf1-dea9-a1f40fe7e13c",
+            "D01": "3a14198e-d724-df6d-5e32-5483b3cab583",
+            "D02": "3a14198e-d724-1e28-c885-574c3df468d0",
+            "D03": "3a14198e-d724-28a2-a760-baa896f46b66",
+            "D04": "3a14198e-d724-0ddd-9654-f9352a421de9"
+        }
+    },
+    "试剂堆栈": {
+        "uuid": "3a14198c-c2cc-0290-e086-44a428fba248",
+        "site_uuids": {
+            "A01": "3a14198c-c2cf-8b40-af28-b467808f1c36",  # x=1, y=1, code=0001-0001
+            "A02": "3a14198c-c2d0-dc7d-b8d0-e1d88cee3094",  # x=1, y=2, code=0001-0002
+            "A03": "3a14198c-c2d0-354f-39ad-642e1a72fcb8",  # x=1, y=3, code=0001-0003
+            "A04": "3a14198c-c2d0-725e-523d-34c037ac2440",  # x=1, y=4, code=0001-0004
+            "B01": "3a14198c-c2d0-f3e7-871a-e470d144296f",  # x=2, y=1, code=0001-0005
+            "B02": "3a14198c-c2d0-2070-efc8-44e245f10c6f",  # x=2, y=2, code=0001-0006
+            "B03": "3a14198c-c2d0-1559-105d-0ea30682cab4",  # x=2, y=3, code=0001-0007
+            "B04": "3a14198c-c2d0-efce-0939-69ca5a7dfd39"   # x=2, y=4, code=0001-0008
+        }
+    }
+}
+
+# ============================================================================
+# 物料类型配置
+# ============================================================================
+# 说明:
+# - 格式: PyLabRobot资源类型名称 → Bioyond系统typeId的UUID
+# - 这个映射基于 resource.model 属性 (不是显示名称!)
+# - UUID为空表示该类型暂未在Bioyond系统中定义
+MATERIAL_TYPE_MAPPINGS = {
+    # ================================================配液站资源============================================================
+    # ==================================================样品===============================================================
+    "BIOYOND_PolymerStation_1FlaskCarrier": ("烧杯", "3a14196b-24f2-ca49-9081-0cab8021bf1a"),  # 配液站-样品-烧杯
+    "BIOYOND_PolymerStation_1BottleCarrier": ("试剂瓶", "3a14196b-8bcf-a460-4f74-23f21ca79e72"),  # 配液站-样品-试剂瓶
+    "BIOYOND_PolymerStation_6StockCarrier": ("分装板", "3a14196e-5dfe-6e21-0c79-fe2036d052c4"),  # 配液站-样品-分装板
+    "BIOYOND_PolymerStation_Liquid_Vial": ("10%分装小瓶", "3a14196c-76be-2279-4e22-7310d69aed68"),  # 配液站-样品-分装板-第一排小瓶
+    "BIOYOND_PolymerStation_Solid_Vial": ("90%分装小瓶", "3a14196c-cdcf-088d-dc7d-5cf38f0ad9ea"),  # 配液站-样品-分装板-第二排小瓶
+    # ==================================================试剂===============================================================
+    "BIOYOND_PolymerStation_8StockCarrier": ("样品板", "3a14196e-b7a0-a5da-1931-35f3000281e9"),  # 配液站-试剂-样品板（8孔）
+    "BIOYOND_PolymerStation_Solid_Stock": ("样品瓶", "3a14196a-cf7d-8aea-48d8-b9662c7dba94"),  # 配液站-试剂-样品板-样品瓶
+
+}
+
+# ============================================================================
+# 动态生成的库位UUID映射（从WAREHOUSE_MAPPING中提取）
+# ============================================================================
+
+LOCATION_MAPPING = {}
+for warehouse_name, warehouse_config in WAREHOUSE_MAPPING.items():
+    if "site_uuids" in warehouse_config:
+        LOCATION_MAPPING.update(warehouse_config["site_uuids"])
+
+# ============================================================================
+# 物料默认参数配置
+# ============================================================================
+# 说明:
+# - 为特定物料名称自动添加默认参数（如密度、分子量、单位等）
+# - 格式: 物料名称 → {参数字典}
+# - 在创建或更新物料时，会自动合并这些参数到 Parameters 字段
+# - unit: 物料的计量单位（会用于 unit 字段）
+# - density/densityUnit: 密度信息（会添加到 Parameters 中）
+
+MATERIAL_DEFAULT_PARAMETERS = {
+    # 溶剂类
+    "NMP": {
+        "unit": "毫升",
+        "density": "1.03",
+        "densityUnit": "g/mL",
+        "description": "N-甲基吡咯烷酮 (N-Methyl-2-pyrrolidone)"
+    },
+    # 可以继续添加其他物料...
+}
+
+# ============================================================================
+# 物料类型默认参数配置
+# ============================================================================
+# 说明:
+# - 为特定物料类型（UUID）自动添加默认参数
+# - 格式: Bioyond类型UUID → {参数字典}
+# - 优先级低于按名称匹配的配置
+MATERIAL_TYPE_PARAMETERS = {
+    # 示例:
+    # "3a14196b-24f2-ca49-9081-0cab8021bf1a": {  # 烧杯
+    #     "unit": "个"
+    # }
+}

unilabos/devices/workstation/bioyond_studio/dispensing_station/dispensing_station.py

@@ -4,7 +4,8 @@ import time
 from typing import Optional, Dict, Any, List
 from typing_extensions import TypedDict
 import requests
-from unilabos.devices.workstation.bioyond_studio.config import API_CONFIG
+import pint
+
 
 from unilabos.devices.workstation.bioyond_studio.bioyond_rpc import BioyondException
 from unilabos.devices.workstation.bioyond_studio.station import BioyondWorkstation
@@ -25,13 +26,89 @@ class ComputeExperimentDesignReturn(TypedDict):
 class BioyondDispensingStation(BioyondWorkstation):
     def __init__(
         self,
-        config,
+        config: dict = None,
-            # 桌子
+        deck=None,
-        deck,
+        protocol_type=None,
-        *args,
         **kwargs,
     ):
-        super().__init__(config, deck, *args, **kwargs)
+        """初始化配液站
+
+        Args:
+            config: 配置字典,应包含material_type_mappings等配置
+            deck: Deck对象
+            protocol_type: 协议类型(由ROS系统传递,此处忽略)
+            **kwargs: 其他可能的参数
+        """
+        if config is None:
+            config = {}
+
+        # 将 kwargs 合并到 config 中 (处理扁平化配置如 api_key)
+        config.update(kwargs)
+
+        if deck is None and config:
+            deck = config.get('deck')
+
+        # 🔧 修复: 确保 Deck 上的 warehouses 具有正确的 UUID (必须在 super().__init__ 之前执行，因为父类会触发同步)
+        # 从配置中读取 warehouse_mapping，并应用到实际的 deck 资源上
+        if config and "warehouse_mapping" in config and deck:
+            warehouse_mapping = config["warehouse_mapping"]
+            print(f"正在根据配置更新 Deck warehouse UUIDs... (共有 {len(warehouse_mapping)} 个配置)")
+
+            user_deck = deck
+            # 初始化 warehouses 字典
+            if not hasattr(user_deck, "warehouses") or user_deck.warehouses is None:
+                user_deck.warehouses = {}
+
+            # 1. 尝试从 children 中查找匹配的资源
+            for child in user_deck.children:
+                # 简单判断: 如果名字在 mapping 中，就认为是 warehouse
+                if child.name in warehouse_mapping:
+                    user_deck.warehouses[child.name] = child
+                    print(f"  - 从子资源中找到 warehouse: {child.name}")
+
+            # 2. 如果还是没找到，且 Deck 类有 setup 方法，尝试调用 setup (针对 Deck 对象正确但未初始化的情况)
+            if not user_deck.warehouses and hasattr(user_deck, "setup"):
+                print("  - 尝试调用 deck.setup() 初始化仓库...")
+                try:
+                    user_deck.setup()
+                    # setup 后重新检查
+                    if hasattr(user_deck, "warehouses") and user_deck.warehouses:
+                            print(f"  - setup() 成功，找到 {len(user_deck.warehouses)} 个仓库")
+                except Exception as e:
+                    print(f"  - 调用 setup() 失败: {e}")
+
+            # 3. 如果仍然为空，可能需要手动创建 (仅针对特定已知的 Deck 类型进行补救，这里暂时只打印警告)
+            if not user_deck.warehouses:
+                    print("  - ⚠️ 仍然无法找到任何 warehouse 资源！")
+
+            for wh_name, wh_config in warehouse_mapping.items():
+                target_uuid = wh_config.get("uuid")
+
+                # 尝试在 deck.warehouses 中查找
+                wh_resource = None
+                if hasattr(user_deck, "warehouses") and wh_name in user_deck.warehouses:
+                    wh_resource = user_deck.warehouses[wh_name]
+
+                # 如果没找到，尝试在所有子资源中查找
+                if not wh_resource:
+                    wh_resource = user_deck.get_resource(wh_name)
+
+                if wh_resource:
+                    if target_uuid:
+                        current_uuid = getattr(wh_resource, "uuid", None)
+                        print(f"✅ 更新仓库 '{wh_name}' UUID: {current_uuid} -> {target_uuid}")
+
+                        # 动态添加 uuid 属性
+                        wh_resource.uuid = target_uuid
+                        # 同时也确保 category 正确，避免 graphio 识别错误
+                        # wh_resource.category = "warehouse"
+                    else:
+                            print(f"⚠️ 仓库 '{wh_name}' 在配置中没有 UUID")
+                else:
+                    print(f"❌ 在 Deck 中未找到配置的仓库: '{wh_name}'")
+
+        super().__init__(bioyond_config=config, deck=deck)
+
         # self.config = config
         # self.api_key = config["api_key"]
         # self.host = config["api_host"]
@@ -43,6 +120,41 @@ class BioyondDispensingStation(BioyondWorkstation):
         # 用于跟踪任务完成状态的字典: {orderCode: {status, order_id, timestamp}}
         self.order_completion_status = {}
 
+        # 初始化 pint 单位注册表
+        self.ureg = pint.UnitRegistry()
+
+        # 化合物信息
+        self.compound_info = {
+            "MolWt": {
+                "MDA": 108.14 * self.ureg.g / self.ureg.mol,
+                "TDA": 122.16 * self.ureg.g / self.ureg.mol,
+                "PAPP": 521.62 * self.ureg.g / self.ureg.mol,
+                "BTDA": 322.23 * self.ureg.g / self.ureg.mol,
+                "BPDA": 294.22 * self.ureg.g / self.ureg.mol,
+                "6FAP": 366.26 * self.ureg.g / self.ureg.mol,
+                "PMDA": 218.12 * self.ureg.g / self.ureg.mol,
+                "MPDA": 108.14 * self.ureg.g / self.ureg.mol,
+                "SIDA": 248.51 * self.ureg.g / self.ureg.mol,
+                "ODA": 200.236 * self.ureg.g / self.ureg.mol,
+                "4,4'-ODA": 200.236 * self.ureg.g / self.ureg.mol,
+                "134": 292.34 * self.ureg.g / self.ureg.mol,
+            },
+            "FuncGroup": {
+                "MDA": "Amine",
+                "TDA": "Amine",
+                "PAPP": "Amine",
+                "BTDA": "Anhydride",
+                "BPDA": "Anhydride",
+                "6FAP": "Amine",
+                "MPDA": "Amine",
+                "SIDA": "Amine",
+                "PMDA": "Anhydride",
+                "ODA": "Amine",
+                "4,4'-ODA": "Amine",
+                "134": "Amine",
+            }
+        }
+
     def _post_project_api(self, endpoint: str, data: Any) -> Dict[str, Any]:
         """项目接口通用POST调用
 
@@ -54,7 +166,7 @@ class BioyondDispensingStation(BioyondWorkstation):
             dict: 服务端响应，失败时返回 {code:0,message,...}
         """
         request_data = {
-            "apiKey": API_CONFIG["api_key"],
+            "apiKey": self.bioyond_config["api_key"],
             "requestTime": self.hardware_interface.get_current_time_iso8601(),
             "data": data
         }
@@ -85,7 +197,7 @@ class BioyondDispensingStation(BioyondWorkstation):
             dict: 服务端响应，失败时返回 {code:0,message,...}
         """
         request_data = {
-            "apiKey": API_CONFIG["api_key"],
+            "apiKey": self.bioyond_config["api_key"],
             "requestTime": self.hardware_interface.get_current_time_iso8601(),
             "data": data
         }
@@ -118,20 +230,22 @@ class BioyondDispensingStation(BioyondWorkstation):
                     ratio = json.loads(ratio)
                 except Exception:
                     ratio = {}
-            root = str(Path(__file__).resolve().parents[3])
-            if root not in sys.path:
-                sys.path.append(root)
-            try:
-                mod = importlib.import_module("tem.compute")
-            except Exception as e:
-                raise BioyondException(f"无法导入计算模块: {e}")
             try:
                 wp = float(wt_percent) if isinstance(wt_percent, str) else wt_percent
                 mt = float(m_tot) if isinstance(m_tot, str) else m_tot
                 tp = float(titration_percent) if isinstance(titration_percent, str) else titration_percent
             except Exception as e:
                 raise BioyondException(f"参数解析失败: {e}")
-            res = mod.generate_experiment_design(ratio=ratio, wt_percent=wp, m_tot=mt, titration_percent=tp)
+
+            # 2. 调用内部计算方法
+            res = self._generate_experiment_design(
+                ratio=ratio,
+                wt_percent=wp,
+                m_tot=mt,
+                titration_percent=tp
+            )
+
+            # 3. 构造返回结果
             out = {
                 "solutions": res.get("solutions", []),
                 "titration": res.get("titration", {}),
@@ -140,11 +254,248 @@ class BioyondDispensingStation(BioyondWorkstation):
                 "return_info": json.dumps(res, ensure_ascii=False)
             }
             return out
+
         except BioyondException:
             raise
         except Exception as e:
             raise BioyondException(str(e))
 
+    def _generate_experiment_design(
+        self,
+        ratio: dict,
+        wt_percent: float = 0.25,
+        m_tot: float = 70,
+        titration_percent: float = 0.03,
+    ) -> dict:
+        """内部方法：生成实验设计
+
+        根据FuncGroup自动区分二胺和二酐，每种二胺单独配溶液，严格按照ratio顺序投料。
+
+        参数:
+            ratio: 化合物配比字典，格式: {"compound_name": ratio_value}
+            wt_percent: 固体重量百分比
+            m_tot: 反应混合物总质量(g)
+            titration_percent: 滴定溶液百分比
+
+        返回:
+            包含实验设计详细参数的字典
+        """
+        # 溶剂密度
+        ρ_solvent = 1.03 * self.ureg.g / self.ureg.ml
+        # 二酐溶解度
+        solubility = 0.02 * self.ureg.g / self.ureg.ml
+        # 投入固体时最小溶剂体积
+        V_min = 30 * self.ureg.ml
+        m_tot = m_tot * self.ureg.g
+
+        # 保持ratio中的顺序
+        compound_names = list(ratio.keys())
+        compound_ratios = list(ratio.values())
+
+        # 验证所有化合物是否在 compound_info 中定义
+        undefined_compounds = [name for name in compound_names if name not in self.compound_info["MolWt"]]
+        if undefined_compounds:
+            available = list(self.compound_info["MolWt"].keys())
+            raise ValueError(
+                f"以下化合物未在 compound_info 中定义: {undefined_compounds}。"
+                f"可用的化合物: {available}"
+            )
+
+        # 获取各化合物的分子量和官能团类型
+        molecular_weights = [self.compound_info["MolWt"][name] for name in compound_names]
+        func_groups = [self.compound_info["FuncGroup"][name] for name in compound_names]
+
+        # 记录化合物信息用于调试
+        self.hardware_interface._logger.info(f"化合物名称: {compound_names}")
+        self.hardware_interface._logger.info(f"官能团类型: {func_groups}")
+
+        # 按原始顺序分离二胺和二酐
+        ordered_compounds = list(zip(compound_names, compound_ratios, molecular_weights, func_groups))
+        diamine_compounds = [(name, ratio_val, mw, i) for i, (name, ratio_val, mw, fg) in enumerate(ordered_compounds) if fg == "Amine"]
+        anhydride_compounds = [(name, ratio_val, mw, i) for i, (name, ratio_val, mw, fg) in enumerate(ordered_compounds) if fg == "Anhydride"]
+
+        if not diamine_compounds or not anhydride_compounds:
+            raise ValueError(
+                f"需要同时包含二胺(Amine)和二酐(Anhydride)化合物。"
+                f"当前二胺: {[c[0] for c in diamine_compounds]}, "
+                f"当前二酐: {[c[0] for c in anhydride_compounds]}"
+            )
+
+        # 计算加权平均分子量 (基于摩尔比)
+        total_molar_ratio = sum(compound_ratios)
+        weighted_molecular_weight = sum(ratio_val * mw for ratio_val, mw in zip(compound_ratios, molecular_weights))
+
+        # 取最后一个二酐用于滴定
+        titration_anhydride = anhydride_compounds[-1]
+        solid_anhydrides = anhydride_compounds[:-1] if len(anhydride_compounds) > 1 else []
+
+        # 二胺溶液配制参数 - 每种二胺单独配制
+        diamine_solutions = []
+        total_diamine_volume = 0 * self.ureg.ml
+
+        # 计算反应物的总摩尔量
+        n_reactant = m_tot * wt_percent / weighted_molecular_weight
+
+        for name, ratio_val, mw, order_index in diamine_compounds:
+            # 跳过 SIDA
+            if name == "SIDA":
+                continue
+
+            # 计算该二胺需要的摩尔数
+            n_diamine_needed = n_reactant * ratio_val
+
+            # 二胺溶液配制参数 (每种二胺固定配制参数)
+            m_diamine_solid = 5.0 * self.ureg.g  # 每种二胺固体质量
+            V_solvent_for_this = 20 * self.ureg.ml  # 每种二胺溶剂体积
+            m_solvent_for_this = ρ_solvent * V_solvent_for_this
+
+            # 计算该二胺溶液的浓度
+            c_diamine = (m_diamine_solid / mw) / V_solvent_for_this
+
+            # 计算需要移取的溶液体积
+            V_diamine_needed = n_diamine_needed / c_diamine
+
+            diamine_solutions.append({
+                "name": name,
+                "order": order_index,
+                "solid_mass": m_diamine_solid.magnitude,
+                "solvent_volume": V_solvent_for_this.magnitude,
+                "concentration": c_diamine.magnitude,
+                "volume_needed": V_diamine_needed.magnitude,
+                "molar_ratio": ratio_val
+            })
+
+            total_diamine_volume += V_diamine_needed
+
+        # 按原始顺序排序
+        diamine_solutions.sort(key=lambda x: x["order"])
+
+        # 计算滴定二酐的质量
+        titration_name, titration_ratio, titration_mw, _ = titration_anhydride
+        m_titration_anhydride = n_reactant * titration_ratio * titration_mw
+        m_titration_90 = m_titration_anhydride * (1 - titration_percent)
+        m_titration_10 = m_titration_anhydride * titration_percent
+
+        # 计算其他固体二酐的质量 (按顺序)
+        solid_anhydride_masses = []
+        for name, ratio_val, mw, order_index in solid_anhydrides:
+            mass = n_reactant * ratio_val * mw
+            solid_anhydride_masses.append({
+                "name": name,
+                "order": order_index,
+                "mass": mass.magnitude,
+                "molar_ratio": ratio_val
+            })
+
+        # 按原始顺序排序
+        solid_anhydride_masses.sort(key=lambda x: x["order"])
+
+        # 计算溶剂用量
+        total_diamine_solution_mass = sum(
+            sol["volume_needed"] * ρ_solvent for sol in diamine_solutions
+        ) * self.ureg.ml
+
+        # 预估滴定溶剂量、计算补加溶剂量
+        m_solvent_titration = m_titration_10 / solubility * ρ_solvent
+        m_solvent_add = m_tot * (1 - wt_percent) - total_diamine_solution_mass - m_solvent_titration
+
+        # 检查最小溶剂体积要求
+        total_liquid_volume = (total_diamine_solution_mass + m_solvent_add) / ρ_solvent
+        m_tot_min = V_min / total_liquid_volume * m_tot
+
+        # 如果需要，按比例放大
+        scale_factor = 1.0
+        if m_tot_min > m_tot:
+            scale_factor = (m_tot_min / m_tot).magnitude
+            m_titration_90 *= scale_factor
+            m_titration_10 *= scale_factor
+            m_solvent_add *= scale_factor
+            m_solvent_titration *= scale_factor
+
+            # 更新二胺溶液用量
+            for sol in diamine_solutions:
+                sol["volume_needed"] *= scale_factor
+
+            # 更新固体二酐用量
+            for anhydride in solid_anhydride_masses:
+                anhydride["mass"] *= scale_factor
+
+            m_tot = m_tot_min
+
+        # 生成投料顺序
+        feeding_order = []
+
+        # 1. 固体二酐 (按顺序)
+        for anhydride in solid_anhydride_masses:
+            feeding_order.append({
+                "step": len(feeding_order) + 1,
+                "type": "solid_anhydride",
+                "name": anhydride["name"],
+                "amount": anhydride["mass"],
+                "order": anhydride["order"]
+            })
+
+        # 2. 二胺溶液 (按顺序)
+        for sol in diamine_solutions:
+            feeding_order.append({
+                "step": len(feeding_order) + 1,
+                "type": "diamine_solution",
+                "name": sol["name"],
+                "amount": sol["volume_needed"],
+                "order": sol["order"]
+            })
+
+        # 3. 主要二酐粉末
+        feeding_order.append({
+            "step": len(feeding_order) + 1,
+            "type": "main_anhydride",
+            "name": titration_name,
+            "amount": m_titration_90.magnitude,
+            "order": titration_anhydride[3]
+        })
+
+        # 4. 补加溶剂
+        if m_solvent_add > 0:
+            feeding_order.append({
+                "step": len(feeding_order) + 1,
+                "type": "additional_solvent",
+                "name": "溶剂",
+                "amount": m_solvent_add.magnitude,
+                "order": 999
+            })
+
+        # 5. 滴定二酐溶液
+        feeding_order.append({
+            "step": len(feeding_order) + 1,
+            "type": "titration_anhydride",
+            "name": f"{titration_name} 滴定液",
+            "amount": m_titration_10.magnitude,
+            "titration_solvent": m_solvent_titration.magnitude,
+            "order": titration_anhydride[3]
+        })
+
+        # 返回实验设计结果
+        results = {
+            "total_mass": m_tot.magnitude,
+            "scale_factor": scale_factor,
+            "solutions": diamine_solutions,
+            "solids": solid_anhydride_masses,
+            "titration": {
+                "name": titration_name,
+                "main_portion": m_titration_90.magnitude,
+                "titration_portion": m_titration_10.magnitude,
+                "titration_solvent": m_solvent_titration.magnitude,
+            },
+            "solvents": {
+                "additional_solvent": m_solvent_add.magnitude,
+                "total_liquid_volume": total_liquid_volume.magnitude
+            },
+            "feeding_order": feeding_order,
+            "minimum_required_mass": m_tot_min.magnitude
+        }
+
+        return results
+
     # 90%10%小瓶投料任务创建方法
     def create_90_10_vial_feeding_task(self,
                                        order_name: str = None,
@@ -961,6 +1312,108 @@ class BioyondDispensingStation(BioyondWorkstation):
             'actualVolume': actual_volume
         }
 
+    def _simplify_report(self, report) -> Dict[str, Any]:
+        """简化实验报告，只保留关键信息，去除冗余的工作流参数"""
+        if not isinstance(report, dict):
+            return report
+
+        data = report.get('data', {})
+        if not isinstance(data, dict):
+            return report
+
+        # 提取关键信息
+        simplified = {
+            'name': data.get('name'),
+            'code': data.get('code'),
+            'requester': data.get('requester'),
+            'workflowName': data.get('workflowName'),
+            'workflowStep': data.get('workflowStep'),
+            'requestTime': data.get('requestTime'),
+            'startPreparationTime': data.get('startPreparationTime'),
+            'completeTime': data.get('completeTime'),
+            'useTime': data.get('useTime'),
+            'status': data.get('status'),
+            'statusName': data.get('statusName'),
+        }
+
+        # 提取物料信息（简化版）
+        pre_intakes = data.get('preIntakes', [])
+        if pre_intakes and isinstance(pre_intakes, list):
+            first_intake = pre_intakes[0]
+            sample_materials = first_intake.get('sampleMaterials', [])
+
+            # 简化物料信息
+            simplified_materials = []
+            for material in sample_materials:
+                if isinstance(material, dict):
+                    mat_info = {
+                        'materialName': material.get('materialName'),
+                        'materialTypeName': material.get('materialTypeName'),
+                        'materialCode': material.get('materialCode'),
+                        'materialLocation': material.get('materialLocation'),
+                    }
+
+                    # 解析parameters中的关键信息（如密度、加料历史等）
+                    params_str = material.get('parameters', '{}')
+                    try:
+                        params = json.loads(params_str) if isinstance(params_str, str) else params_str
+                        if isinstance(params, dict):
+                            # 只保留关键参数
+                            if 'density' in params:
+                                mat_info['density'] = params['density']
+                            if 'feedingHistory' in params:
+                                mat_info['feedingHistory'] = params['feedingHistory']
+                            if 'liquidVolume' in params:
+                                mat_info['liquidVolume'] = params['liquidVolume']
+                            if 'm_diamine_tot' in params:
+                                mat_info['m_diamine_tot'] = params['m_diamine_tot']
+                            if 'wt_diamine' in params:
+                                mat_info['wt_diamine'] = params['wt_diamine']
+                    except:
+                        pass
+
+                    simplified_materials.append(mat_info)
+
+            simplified['sampleMaterials'] = simplified_materials
+
+            # 提取extraProperties中的实际值
+            extra_props = first_intake.get('extraProperties', {})
+            if isinstance(extra_props, dict):
+                simplified_extra = {}
+                for key, value in extra_props.items():
+                    try:
+                        parsed_value = json.loads(value) if isinstance(value, str) else value
+                        simplified_extra[key] = parsed_value
+                    except:
+                        simplified_extra[key] = value
+                simplified['extraProperties'] = simplified_extra
+
+        return {
+            'data': simplified,
+            'code': report.get('code'),
+            'message': report.get('message'),
+            'timestamp': report.get('timestamp')
+        }
+
+    def scheduler_start(self) -> dict:
+        """启动调度器 - 启动Bioyond工作站的任务调度器，开始执行队列中的任务
+
+        Returns:
+            dict: 包含return_info的字典，return_info为整型(1=成功)
+
+        Raises:
+            BioyondException: 调度器启动失败时抛出异常
+        """
+        result = self.hardware_interface.scheduler_start()
+        self.hardware_interface._logger.info(f"调度器启动结果: {result}")
+
+        if result != 1:
+            error_msg = "启动调度器失败: 有未处理错误，调度无法启动。请检查Bioyond系统状态。"
+            self.hardware_interface._logger.error(error_msg)
+            raise BioyondException(error_msg)
+
+        return {"return_info": result}
+
     # 等待多个任务完成并获取实验报告
     def wait_for_multiple_orders_and_get_reports(self,
                                                   batch_create_result: str = None,
@@ -1002,7 +1455,12 @@ class BioyondDispensingStation(BioyondWorkstation):
 
             # 验证batch_create_result参数
             if not batch_create_result or batch_create_result == "":
-                raise BioyondException("batch_create_result参数为空，请确保从batch_create节点正确连接handle")
+                raise BioyondException(
+                    "batch_create_result参数为空，请确保:\n"
+                    "1. batch_create节点与wait节点之间正确连接了handle\n"
+                    "2. batch_create节点成功执行并返回了结果\n"
+                    "3. 检查上游batch_create任务是否成功创建了订单"
+                )
 
             # 解析batch_create_result JSON对象
             try:
@@ -1031,7 +1489,17 @@ class BioyondDispensingStation(BioyondWorkstation):
 
             # 验证提取的数据
             if not order_codes:
-                raise BioyondException("batch_create_result中未找到order_codes字段或为空")
+                self.hardware_interface._logger.error(
+                    f"batch_create任务未生成任何订单。batch_create_result内容: {batch_create_result}"
+                )
+                raise BioyondException(
+                    "batch_create_result中未找到order_codes或为空。\n"
+                    "可能的原因:\n"
+                    "1. batch_create任务执行失败（检查任务是否报错）\n"
+                    "2. 物料配置问题（如'物料样品板分配失败'）\n"
+                    "3. Bioyond系统状态异常\n"
+                    f"请检查batch_create任务的执行结果"
+                )
             if not order_ids:
                 raise BioyondException("batch_create_result中未找到order_ids字段或为空")
 
@@ -1114,6 +1582,8 @@ class BioyondDispensingStation(BioyondWorkstation):
                                 self.hardware_interface._logger.info(
                                     f"成功获取任务 {order_code} 的实验报告"
                                 )
+                                # 简化报告，去除冗余信息
+                                report = self._simplify_report(report)
 
                             reports.append({
                                 "order_code": order_code,
@@ -1288,7 +1758,7 @@ class BioyondDispensingStation(BioyondWorkstation):
                 f"开始执行批量物料转移: {len(transfer_groups)}组任务 -> {target_device_id}"
             )
 
-            from .config import WAREHOUSE_MAPPING
+            warehouse_mapping = self.bioyond_config.get("warehouse_mapping", {})
             results = []
             successful_count = 0
             failed_count = 0

unilabos/devices/workstation/bioyond_studio/station.py

@@ -6,6 +6,7 @@ Bioyond Workstation Implementation
 """
 import time
 import traceback
+import threading
 from datetime import datetime
 from typing import Dict, Any, List, Optional, Union
 import json
@@ -23,12 +24,94 @@ from unilabos.ros.nodes.presets.workstation import ROS2WorkstationNode
 from unilabos.ros.msgs.message_converter import convert_to_ros_msg, Float64, String
 from pylabrobot.resources.resource import Resource as ResourcePLR
 
-from unilabos.devices.workstation.bioyond_studio.config import (
+
-    API_CONFIG, WORKFLOW_MAPPINGS, MATERIAL_TYPE_MAPPINGS, WAREHOUSE_MAPPING, HTTP_SERVICE_CONFIG
-)
 from unilabos.devices.workstation.workstation_http_service import WorkstationHTTPService
 
 
+class ConnectionMonitor:
+    """Bioyond连接监控器"""
+    def __init__(self, workstation, check_interval=30):
+        self.workstation = workstation
+        self.check_interval = check_interval
+        self._running = False
+        self._thread = None
+        self._last_status = "unknown"
+
+    def start(self):
+        if self._running:
+            return
+        self._running = True
+        self._thread = threading.Thread(target=self._monitor_loop, daemon=True, name="BioyondConnectionMonitor")
+        self._thread.start()
+        logger.info("Bioyond连接监控器已启动")
+
+    def stop(self):
+        self._running = False
+        if self._thread:
+            self._thread.join(timeout=2)
+            logger.info("Bioyond连接监控器已停止")
+
+    def _monitor_loop(self):
+        while self._running:
+            try:
+                # 使用 lightweight API 检查连接
+                # query_matial_type_list 是比较快的查询
+                start_time = time.time()
+                result = self.workstation.hardware_interface.material_type_list()
+
+                status = "online" if result else "offline"
+                msg = "Connection established" if status == "online" else "Failed to get material type list"
+
+                if status != self._last_status:
+                    logger.info(f"Bioyond连接状态变更: {self._last_status} -> {status}")
+                    self._publish_event(status, msg)
+                    self._last_status = status
+
+                # 发布心跳 (可选，或者只在状态变更时发布)
+                # self._publish_event(status, msg)
+
+            except Exception as e:
+                logger.error(f"Bioyond连接检查异常: {e}")
+                if self._last_status != "error":
+                    self._publish_event("error", str(e))
+                    self._last_status = "error"
+
+            time.sleep(self.check_interval)
+
+    def _publish_event(self, status, message):
+        try:
+            if hasattr(self.workstation, "_ros_node") and self.workstation._ros_node:
+                event_data = {
+                    "status": status,
+                    "message": message,
+                    "timestamp": datetime.now().isoformat()
+                }
+
+                # 动态发布消息，需要在 ROS2DeviceNode 中有对应支持
+                # 这里假设通用事件发布机制，使用 String 类型的 topic
+                # 话题: /<namespace>/events/device_status
+                ns = self.workstation._ros_node.namespace
+                topic = f"{ns}/events/device_status"
+
+                # 使用 ROS2DeviceNode 的发布功能
+                # 如果没有预定义的 publisher，需要动态创建
+                # 注意：workstation base node 可能没有自动创建 arbitrary publishers 的机制
+                # 这里我们先尝试用 String json 发布
+
+                # 在 ROS2DeviceNode 中通常需要先 create_publisher
+                # 为了简单起见，我们检查是否已有 publisher，没有则创建
+                if not hasattr(self.workstation, "_device_status_pub"):
+                    self.workstation._device_status_pub = self.workstation._ros_node.create_publisher(
+                        String, topic, 10
+                    )
+
+                self.workstation._device_status_pub.publish(
+                    convert_to_ros_msg(String, json.dumps(event_data, ensure_ascii=False))
+                )
+        except Exception as e:
+            logger.error(f"发布设备状态事件失败: {e}")
+
+
 class BioyondResourceSynchronizer(ResourceSynchronizer):
     """Bioyond资源同步器
 
@@ -174,9 +257,8 @@ class BioyondResourceSynchronizer(ResourceSynchronizer):
             else:
                 logger.info(f"[同步→Bioyond] ➕ 物料不存在于 Bioyond，将创建新物料并入库")
 
-            # 第1步：获取仓库配置
+            # 第1步：从配置中获取仓库配置
-            from .config import WAREHOUSE_MAPPING
+            warehouse_mapping = self.bioyond_config.get("warehouse_mapping", {})
-            warehouse_mapping = WAREHOUSE_MAPPING
 
             # 确定目标仓库名称
             parent_name = None
@@ -238,14 +320,20 @@ class BioyondResourceSynchronizer(ResourceSynchronizer):
             # 第2步：转换为 Bioyond 格式
             logger.info(f"[同步→Bioyond] 🔄 转换物料为 Bioyond 格式...")
 
-            # 导入物料默认参数配置
+            # 从配置中获取物料默认参数
-            from .config import MATERIAL_DEFAULT_PARAMETERS
+            material_default_params = self.workstation.bioyond_config.get("material_default_parameters", {})
+            material_type_params = self.workstation.bioyond_config.get("material_type_parameters", {})
+
+            # 合并参数配置：物料名称参数 + typeId参数（转换为 type:<uuid> 格式）
+            merged_params = material_default_params.copy()
+            for type_id, params in material_type_params.items():
+                merged_params[f"type:{type_id}"] = params
 
             bioyond_material = resource_plr_to_bioyond(
                 [resource],
                 type_mapping=self.workstation.bioyond_config["material_type_mappings"],
                 warehouse_mapping=self.workstation.bioyond_config["warehouse_mapping"],
-                material_params=MATERIAL_DEFAULT_PARAMETERS
+                material_params=merged_params
             )[0]
 
             logger.info(f"[同步→Bioyond] 🔧 准备覆盖locations字段，目标仓库: {parent_name}, 库位: {update_site}, UUID: {target_location_uuid[:8]}...")
@@ -468,13 +556,20 @@ class BioyondResourceSynchronizer(ResourceSynchronizer):
                 return material_bioyond_id
 
             # 转换为 Bioyond 格式
-            from .config import MATERIAL_DEFAULT_PARAMETERS
+            # 从配置中获取物料默认参数
+            material_default_params = self.workstation.bioyond_config.get("material_default_parameters", {})
+            material_type_params = self.workstation.bioyond_config.get("material_type_parameters", {})
+
+            # 合并参数配置：物料名称参数 + typeId参数（转换为 type:<uuid> 格式）
+            merged_params = material_default_params.copy()
+            for type_id, params in material_type_params.items():
+                merged_params[f"type:{type_id}"] = params
 
             bioyond_material = resource_plr_to_bioyond(
                 [resource],
                 type_mapping=self.workstation.bioyond_config["material_type_mappings"],
                 warehouse_mapping=self.workstation.bioyond_config["warehouse_mapping"],
-                material_params=MATERIAL_DEFAULT_PARAMETERS
+                material_params=merged_params
             )[0]
 
             # ⚠️ 关键：创建物料时不设置 locations，让 Bioyond 系统暂不分配库位
@@ -528,8 +623,7 @@ class BioyondResourceSynchronizer(ResourceSynchronizer):
             logger.info(f"[物料入库] 目标库位: {update_site}")
 
             # 获取仓库配置和目标库位 UUID
-            from .config import WAREHOUSE_MAPPING
+            warehouse_mapping = self.workstation.bioyond_config.get("warehouse_mapping", {})
-            warehouse_mapping = WAREHOUSE_MAPPING
 
             parent_name = None
             target_location_uuid = None
@@ -584,6 +678,44 @@ class BioyondWorkstation(WorkstationBase):
     集成Bioyond物料管理的工作站实现
     """
 
+    def _publish_task_status(
+        self,
+        task_id: str,
+        task_type: str,
+        status: str,
+        result: dict = None,
+        progress: float = 0.0,
+        task_code: str = None
+    ):
+        """发布任务状态事件"""
+        try:
+            if not getattr(self, "_ros_node", None):
+                return
+
+            event_data = {
+                "task_id": task_id,
+                "task_code": task_code,
+                "task_type": task_type,
+                "status": status,
+                "progress": progress,
+                "timestamp": datetime.now().isoformat()
+            }
+            if result:
+                event_data["result"] = result
+
+            topic = f"{self._ros_node.namespace}/events/task_status"
+
+            if not hasattr(self, "_task_status_pub"):
+                self._task_status_pub = self._ros_node.create_publisher(
+                    String, topic, 10
+                )
+
+            self._task_status_pub.publish(
+                convert_to_ros_msg(String, json.dumps(event_data, ensure_ascii=False))
+            )
+        except Exception as e:
+            logger.error(f"发布任务状态事件失败: {e}")
+
     def __init__(
         self,
         bioyond_config: Optional[Dict[str, Any]] = None,
@@ -605,10 +737,28 @@ class BioyondWorkstation(WorkstationBase):
             raise ValueError("Deck 配置不能为空，请在配置文件中添加正确的 deck 配置")
 
         # 初始化 warehouses 属性
+        if not hasattr(self.deck, "warehouses") or self.deck.warehouses is None:
             self.deck.warehouses = {}
+
+        # 仅当 warehouses 为空时尝试重新扫描（避免覆盖子类的修复）
+        if not self.deck.warehouses:
             for resource in self.deck.children:
-            if isinstance(resource, WareHouse):
+                # 兼容性增强: 只要是仓库类别或者是 WareHouse 实例均可
+                is_warehouse = isinstance(resource, WareHouse) or getattr(resource, "category", "") == "warehouse"
+
+                # 如果配置中有定义，也可以认定为 warehouse
+                if not is_warehouse and "warehouse_mapping" in bioyond_config:
+                    if resource.name in bioyond_config["warehouse_mapping"]:
+                        is_warehouse = True
+
+                if is_warehouse:
                     self.deck.warehouses[resource.name] = resource
+                    # 确保 category 被正确设置，方便后续使用
+                    if getattr(resource, "category", "") != "warehouse":
+                        try:
+                            resource.category = "warehouse"
+                        except:
+                            pass
 
         # 创建通信模块
         self._create_communication_module(bioyond_config)
@@ -627,18 +777,22 @@ class BioyondWorkstation(WorkstationBase):
             self._set_workflow_mappings(bioyond_config["workflow_mappings"])
 
         # 准备 HTTP 报送接收服务配置（延迟到 post_init 启动）
-        # 从 bioyond_config 中获取，如果没有则使用 HTTP_SERVICE_CONFIG 的默认值
+        # 从 bioyond_config 中的 http_service_config 获取
+        http_service_cfg = bioyond_config.get("http_service_config", {})
         self._http_service_config = {
-            "host": bioyond_config.get("http_service_host", HTTP_SERVICE_CONFIG["http_service_host"]),
+            "host": http_service_cfg.get("http_service_host", "127.0.0.1"),
-            "port": bioyond_config.get("http_service_port", HTTP_SERVICE_CONFIG["http_service_port"])
+            "port": http_service_cfg.get("http_service_port", 8080)
         }
-        self.http_service = None  # 将在 post_init 中启动
+        self.http_service = None  # 将在 post_init 启动
+        self.connection_monitor = None # 将在 post_init 启动
 
         logger.info(f"Bioyond工作站初始化完成")
 
     def __del__(self):
         """析构函数：清理资源，停止 HTTP 服务"""
         try:
+            if hasattr(self, 'connection_monitor') and self.connection_monitor:
+                self.connection_monitor.stop()
             if hasattr(self, 'http_service') and self.http_service is not None:
                 logger.info("正在停止 HTTP 报送服务...")
                 self.http_service.stop()
@@ -648,8 +802,19 @@ class BioyondWorkstation(WorkstationBase):
     def post_init(self, ros_node: ROS2WorkstationNode):
         self._ros_node = ros_node
 
+        # 启动连接监控
+        try:
+            self.connection_monitor = ConnectionMonitor(self)
+            self.connection_monitor.start()
+        except Exception as e:
+            logger.error(f"启动连接监控失败: {e}")
+
         # 启动 HTTP 报送接收服务（现在 device_id 已可用）
-        if hasattr(self, '_http_service_config'):
+        # ⚠️ 检查子类是否已经自己管理 HTTP 服务
+        if self.bioyond_config.get("_disable_auto_http_service"):
+            logger.info("🔧 检测到 _disable_auto_http_service 标志，跳过自动启动 HTTP 服务")
+            logger.info("   子类（BioyondCellWorkstation）已自行管理 HTTP 服务")
+        elif hasattr(self, '_http_service_config'):
             try:
                 self.http_service = WorkstationHTTPService(
                     workstation_instance=self,
@@ -688,19 +853,14 @@ class BioyondWorkstation(WorkstationBase):
 
     def _create_communication_module(self, config: Optional[Dict[str, Any]] = None) -> None:
         """创建Bioyond通信模块"""
-        # 创建默认配置
+        # 直接使用传入的配置，不再使用默认值
-        default_config = {
+        # 所有配置必须从 JSON 文件中提供
-            **API_CONFIG,
-            "workflow_mappings": WORKFLOW_MAPPINGS,
-            "material_type_mappings": MATERIAL_TYPE_MAPPINGS,
-            "warehouse_mapping": WAREHOUSE_MAPPING
-        }
-
-        # 如果传入了 config，合并配置（config 中的值会覆盖默认值）
         if config:
-            self.bioyond_config = {**default_config, **config}
+            self.bioyond_config = config
         else:
-            self.bioyond_config = default_config
+            # 如果没有配置，使用空字典（会导致后续错误，但这是预期的）
+            self.bioyond_config = {}
+            print("警告: 未提供 bioyond_config，请确保在 JSON 配置文件中提供完整配置")
 
         self.hardware_interface = BioyondV1RPC(self.bioyond_config)
 
@@ -1014,7 +1174,15 @@ class BioyondWorkstation(WorkstationBase):
 
         workflow_id = self._get_workflow(actual_workflow_name)
         if workflow_id:
+            # 兼容 BioyondReactionStation 中 workflow_sequence 被重写为 property 的情况
+            if isinstance(self.workflow_sequence, list):
                 self.workflow_sequence.append(workflow_id)
+            elif hasattr(self, "_cached_workflow_sequence") and isinstance(self._cached_workflow_sequence, list):
+                self._cached_workflow_sequence.append(workflow_id)
+            else:
+                print(f"❌ 无法添加工作流: workflow_sequence 类型错误 {type(self.workflow_sequence)}")
+                return False
+
             print(f"添加工作流到执行顺序: {actual_workflow_name} -> {workflow_id}")
             return True
         return False
@@ -1215,6 +1383,22 @@ class BioyondWorkstation(WorkstationBase):
             # TODO: 根据实际业务需求处理步骤完成逻辑
             # 例如：更新数据库、触发后续流程等
 
+            # 发布任务状态事件 (running/progress update)
+            self._publish_task_status(
+                task_id=data.get('orderCode'), # 使用 OrderCode 作为关联 ID
+                task_code=data.get('orderCode'),
+                task_type="bioyond_step",
+                status="running",
+                progress=0.5, # 步骤完成视为任务进行中
+                result={"step_name": data.get('stepName'), "step_id": data.get('stepId')}
+            )
+
+            # 更新物料信息
+            # 步骤完成后，物料状态可能发生变化（如位置、用量等），触发同步
+            logger.info(f"[步骤完成报送] 触发物料同步...")
+            self.resource_synchronizer.sync_from_external()
+
+
             return {
                 "processed": True,
                 "step_id": data.get('stepId'),
@@ -1249,6 +1433,17 @@ class BioyondWorkstation(WorkstationBase):
 
             # TODO: 根据实际业务需求处理通量完成逻辑
 
+            # 发布任务状态事件
+            self._publish_task_status(
+                task_id=data.get('orderCode'),
+                task_code=data.get('orderCode'),
+                task_type="bioyond_sample",
+                status="running",
+                progress=0.7,
+                result={"sample_id": data.get('sampleId'), "status": status_desc}
+            )
+
+
             return {
                 "processed": True,
                 "sample_id": data.get('sampleId'),
@@ -1288,6 +1483,32 @@ class BioyondWorkstation(WorkstationBase):
             # TODO: 根据实际业务需求处理任务完成逻辑
             # 例如：更新物料库存、生成报表等
 
+            # 映射状态到事件状态
+            event_status = "completed"
+            if str(data.get('status')) in ["-11", "-12"]:
+                event_status = "error"
+            elif str(data.get('status')) == "30":
+                event_status = "completed"
+            else:
+                event_status = "running" # 其他状态视为运行中（或根据实际定义）
+
+            # 发布任务状态事件
+            self._publish_task_status(
+                task_id=data.get('orderCode'),
+                task_code=data.get('orderCode'),
+                task_type="bioyond_order",
+                status=event_status,
+                progress=1.0 if event_status in ["completed", "error"] else 0.9,
+                result={"order_name": data.get('orderName'), "status": status_desc, "materials_count": len(used_materials)}
+            )
+
+            # 更新物料信息
+            # 任务完成后，且状态为完成时，触发同步以更新最终物料状态
+            if event_status == "completed":
+                logger.info(f"[任务完成报送] 触发物料同步...")
+                self.resource_synchronizer.sync_from_external()
+
+
             return {
                 "processed": True,
                 "order_code": data.get('orderCode'),

unilabos/devices/workstation/coin_cell_assembly/20251230_Modbus_CSV_Mapping_Guide.md

@@ -0,0 +1,84 @@
+# Modbus CSV 地址映射说明
+
+本文档说明 `coin_cell_assembly_a.csv` 文件如何将命名节点映射到实际的 Modbus 地址，以及如何在代码中使用它们。
+
+## 1. CSV 文件结构
+
+地址表文件位于同级目录下：`coin_cell_assembly_a.csv`
+
+每一行定义了一个 Modbus 节点，包含以下关键列：
+
+| 列名 | 说明 | 示例 |
+|------|------|------|
+| **Name** | **节点名称** (代码中引用的 Key) | `COIL_ALUMINUM_FOIL` |
+| **DataType** | 数据类型 (BOOL, INT16, FLOAT32, STRING) | `BOOL` |
+| **Comment** | 注释说明 | `使用铝箔垫` |
+| **Attribute** | 属性 (通常留空或用于额外标记) | |
+| **DeviceType** | Modbus 寄存器类型 (`coil`, `hold_register`) | `coil` |
+| **Address** | **Modbus 地址** (十进制) | `8340` |
+
+### 示例行 (铝箔垫片)
+
+```csv
+COIL_ALUMINUM_FOIL,BOOL,,使用铝箔垫,,coil,8340,
+```
+
+- **名称**: `COIL_ALUMINUM_FOIL`
+- **类型**: `coil` (线圈，读写单个位)
+- **地址**: `8340`
+
+---
+
+## 2. 加载与注册流程
+
+在 `coin_cell_assembly.py` 的初始化代码中：
+
+1. **加载 CSV**: `BaseClient.load_csv()` 读取 CSV 并解析每行定义。
+2. **注册节点**: `modbus_client.register_node_list()` 将解析后的节点注册到 Modbus 客户端实例中。
+
+```python
+# 代码位置: coin_cell_assembly.py (L174-175)
+self.nodes = BaseClient.load_csv(os.path.join(os.path.dirname(__file__), 'coin_cell_assembly_a.csv'))                            
+self.client = modbus_client.register_node_list(self.nodes)
+```
+
+---
+
+## 3. 代码中的使用方式
+
+注册后，通过 `self.client.use_node('节点名称')` 即可获取该节点对象并进行读写操作，无需关心具体地址。
+
+### 控制铝箔垫片 (COIL_ALUMINUM_FOIL)
+
+```python
+# 代码位置: qiming_coin_cell_code 函数 (L1048)
+self.client.use_node('COIL_ALUMINUM_FOIL').write(not lvbodian)
+```
+
+- **写入 True**: 对应 Modbus 功能码 05 (Write Single Coil)，向地址 `8340` 写入 `1` (ON)。
+- **写入 False**: 向地址 `8340` 写入 `0` (OFF)。
+
+> **注意**: 代码中使用了 `not lvbodian`，这意味着逻辑是反转的。如果 `lvbodian` 参数为 `True` (默认)，写入的是 `False` (不使用铝箔垫)。
+
+---
+
+## 4. 地址转换注意事项 (Modbus vs PLC)
+
+CSV 中的 `Address` 列（如 `8340`）是 **Modbus 协议地址**。
+
+如果使用 InoProShop (汇川 PLC 编程软件)，看到的可能是 **PLC 内部地址** (如 `%QX...` 或 `%MW...`)。这两者之间通常需要转换。
+
+### 常见的转换规则 (示例)
+
+- **Coil (线圈) %QX**: 
+  - `Modbus地址 = 字节地址 * 8 + 位偏移`
+  - *例子*: `%QX834.0` -> `834 * 8 + 0` = `6672`
+  - *注意*: 如果 CSV 中配置的是 `8340`，这可能是一个自定义映射，或者是基于不同规则（如直接对应 Word 地址的某种映射，或者可能就是地址写错了/使用了非标准映射）。
+
+- **Register (寄存器) %MW**:
+  - 通常直接对应，或者有偏移量 (如 Modbus 40001 = PLC MW0)。
+
+### 验证方法
+由于 `test_unilab_interact.py` 中发现 `8450` (CSV风格) 不工作，而 `6760` (%QX845.0 计算值) 工作正常，**建议对 CSV 中的其他地址也进行核实**，特别是像 `8340` 这样以 0 结尾看起来像是 "字节地址+0" 的数值，可能实际上应该是 `%QX834.0` 对应的 `6672`。
+
+如果发现设备控制无反应，请尝试按照标准的 Modbus 计算方式转换 PLC 地址。

unilabos/devices/workstation/coin_cell_assembly/20260113_物料搜寻确认弹窗自动处理功能.md

@@ -0,0 +1,352 @@
+# 2026-01-13 物料搜寻确认弹窗自动处理功能
+
+## 概述
+
+本次更新为设备初始化流程添加了**物料搜寻确认弹窗自动检测与处理功能**。在设备初始化过程中，PLC 会弹出物料搜寻确认对话框，现在系统可以根据用户参数自动点击"是"或"否"按钮，无需手动干预。
+
+## 背景问题
+
+### 原有流程
+1. 调用 `func_pack_device_init_auto_start_combined()` 初始化设备
+2. PLC 在初始化过程中弹出物料搜寻确认对话框
+3. **需要人工手动点击**"是"或"否"按钮
+4. PLC 继续完成初始化并启动
+
+### 存在的问题
+- 需要人工干预，无法实现全自动化
+- 影响批量生产效率
+- 容易遗忘点击导致流程卡住
+
+## 解决方案
+
+### 新增 Modbus 地址配置
+
+在 `coin_cell_assembly_b.csv` 第 69-71 行添加三个 coil：
+
+| Name | DeviceType | Address | 说明 |
+|------|-----------|---------|------|
+| COIL_MATERIAL_SEARCH_DIALOG_APPEAR | coil | 6470 | 物料搜寻确认弹窗画面是否出现 |
+| COIL_MATERIAL_SEARCH_CONFIRM_YES | coil | 6480 | 初始化物料搜寻确认按钮"是" |
+| COIL_MATERIAL_SEARCH_CONFIRM_NO | coil | 6490 | 初始化物料搜寻确认按钮"否" |
+
+**Modbus 地址转换：**
+- CSV 6470 → Modbus 5176 (弹窗出现)
+- CSV 6480 → Modbus 5184 (按钮"是")
+- CSV 6490 → Modbus 5192 (按钮"否")
+
+## 代码修改详情
+
+### 1. coin_cell_assembly.py
+
+#### 1.1 新增辅助方法 `_handle_material_search_dialog()`
+
+**位置：** 第 799-901 行
+
+**功能：**
+- 监测物料搜寻确认弹窗是否出现（Coil 5176）
+- 根据 `enable_search` 参数自动点击对应按钮
+- 使用**脉冲模式**模拟真实按钮操作：`True` → 保持 0.5 秒 → `False`
+
+**参数：**
+- `enable_search: bool` - True=点击"是"(启用物料搜寻), False=点击"否"(不启用)
+- `timeout: int = 30` - 等待弹窗出现的最大时间（秒）
+
+**逻辑流程：**
+```python
+1. 监测 COIL_MATERIAL_SEARCH_DIALOG_APPEAR (每 0.5 秒检查一次)
+2. 检测到弹窗出现 (Coil = True)
+3. 选择按钮：
+   - enable_search=True  → COIL_MATERIAL_SEARCH_CONFIRM_YES
+   - enable_search=False → COIL_MATERIAL_SEARCH_CONFIRM_NO
+4. 执行脉冲操作：
+   - 写入 True (按下按钮)
+   - 等待 0.5 秒
+   - 写入 False (释放按钮)
+   - 验证状态
+```
+
+#### 1.2 修改 `func_pack_device_init_auto_start_combined()`
+
+**位置：** 第 904-1115 行
+
+**主要改动：**
+
+1. **添加新参数**
+   ```python
+   def func_pack_device_init_auto_start_combined(
+       self, 
+       material_search_enable: bool = False  # 新增参数
+   ) -> bool:
+   ```
+
+2. **内联初始化逻辑并集成弹窗检测**
+   - 不再调用 `self.func_pack_device_init()`
+   - 将初始化逻辑直接实现在函数内
+   - **在等待初始化完成的循环中实时检测弹窗**
+   - 避免死锁：PLC 等待弹窗确认 ↔ 代码等待初始化完成
+
+3. **关键代码片段**
+   ```python
+   # 等待初始化完成，同时检测物料搜寻弹窗
+   while (self._sys_init_status()) == False:
+       # 检查超时
+       if time.time() - start_wait > max_wait_time:
+           raise RuntimeError(f"初始化超时")
+       
+       # 如果还没处理弹窗，检测弹窗是否出现
+       if not dialog_handled:
+           dialog_state = self.client.use_node('COIL_MATERIAL_SEARCH_DIALOG_APPEAR').read(1)
+           if dialog_actual:  # 弹窗出现
+               # 执行脉冲按钮点击
+               button_node.write(True)   # 按下
+               time.sleep(0.5)            # 保持
+               button_node.write(False)   # 释放
+               dialog_handled = True
+       
+       time.sleep(1)
+   ```
+
+4. **步骤调整**
+   - 步骤 0: 前置条件检查
+   - 步骤 1: 设备初始化（**包含弹窗检测**）
+   - 步骤 1.5: 已在步骤 1 中完成
+   - 步骤 2: 切换自动模式
+   - 步骤 3: 启动设备
+
+### 2. coin_cell_workstation.yaml
+
+**位置：** 第 292-312 行
+
+**修改内容：**
+
+```yaml
+auto-func_pack_device_init_auto_start_combined:
+  goal_default:
+    material_search_enable: false  # 新增默认值
+  
+  schema:
+    description: 组合函数:设备初始化 + 物料搜寻确认 + 切换自动模式 + 启动。初始化过程中会自动检测物料搜寻确认弹窗，并根据参数自动点击"是"或"否"按钮
+    
+    goal:
+      properties:
+        material_search_enable:  # 新增参数配置
+          default: false
+          description: 是否启用物料搜寻功能。设备初始化后会弹出物料搜寻确认弹窗，此参数控制自动点击"是"(启用)或"否"(不启用)。默认为false(不启用物料搜寻)
+          type: boolean
+```
+
+### 3. 测试脚本（已创建，用户已删除）
+
+#### 3.1 test_material_search_dialog.py
+- 从 CSV 动态加载 Modbus 地址
+- 支持 4 种测试模式：
+  - `query` - 查询所有状态
+  - `dialog <0|1>` - 设置弹窗出现/消失
+  - `yes` - 脉冲点击"是"按钮
+  - `no` - 脉冲点击"否"按钮
+- 兼容 pymodbus 3.x API
+
+#### 3.2 更新其他测试脚本
+- `test_coin_cell_reset.py` - 更新为 pymodbus 3.x API
+- `test_unilab_interact.py` - 更新为 pymodbus 3.x API
+
+## 使用方法
+
+### 参数说明
+
+| 参数 | 类型 | 默认值 | 说明 |
+|------|------|--------|------|
+| `material_search_enable` | boolean | `false` | 是否启用物料搜寻功能 |
+
+### 调用示例
+
+#### 1. 不启用物料搜寻（默认）
+```python
+# 默认参数，点击"否"按钮
+await device.func_pack_device_init_auto_start_combined()
+```
+
+或在 YAML workflow 中：
+```yaml
+# 使用默认值 false，不启用物料搜寻
+- BatteryStation/auto-func_pack_device_init_auto_start_combined: {}
+```
+
+#### 2. 启用物料搜寻
+```python
+# 显式设置为 True，点击"是"按钮
+await device.func_pack_device_init_auto_start_combined(
+    material_search_enable=True
+)
+```
+
+或在 YAML workflow 中：
+```yaml
+- BatteryStation/auto-func_pack_device_init_auto_start_combined:
+    goal:
+      material_search_enable: true  # 启用物料搜寻
+```
+
+## 执行日志示例
+
+```
+26-01-13 [21:32:44] [INFO] 开始组合操作：设备初始化 → 物料搜寻确认 → 自动模式 → 启动
+26-01-13 [21:32:44] [INFO] 【步骤 0/4】前置条件检查...
+26-01-13 [21:32:44] [INFO]   ✓ REG_UNILAB_INTERACT 检查通过
+26-01-13 [21:32:44] [INFO]   ✓ COIL_GB_L_IGNORE_CMD 检查通过
+26-01-13 [21:32:44] [INFO] 【步骤 1/4】设备初始化...
+26-01-13 [21:32:44] [INFO] 切换手动模式...
+26-01-13 [21:32:46] [INFO] 发送初始化命令...
+26-01-13 [21:32:47] [INFO] 等待初始化完成（同时监测物料搜寻弹窗）...
+26-01-13 [21:33:05] [INFO] ✓ 在初始化过程中检测到物料搜寻确认弹窗！
+26-01-13 [21:33:05] [INFO] 用户选择: 不启用物料搜寻（点击否）
+26-01-13 [21:33:05] [INFO]   → 按下按钮 '否'
+26-01-13 [21:33:06] [INFO]   → 释放按钮 '否'
+26-01-13 [21:33:07] [INFO] ✓ 成功处理物料搜寻确认弹窗（选择: 否）
+26-01-13 [21:33:08] [INFO] ✓ 初始化状态完成
+26-01-13 [21:33:12] [INFO] ✓ 设备初始化完成
+26-01-13 [21:33:12] [INFO] 【步骤 1.5/4】物料搜寻确认已在初始化过程中完成
+26-01-13 [21:33:12] [INFO] 【步骤 2/4】切换自动模式...
+26-01-13 [21:33:15] [INFO] ✓ 切换自动模式完成
+26-01-13 [21:33:15] [INFO] 【步骤 3/4】启动设备...
+26-01-13 [21:33:18] [INFO] ✓ 启动设备完成
+26-01-13 [21:33:18] [INFO] 组合操作完成：设备已成功初始化、确认物料搜寻、切换自动模式并启动
+```
+
+## 技术要点
+
+### 1. 脉冲模式按钮操作
+模拟真实按钮按压过程：
+1. 写入 `True` (按下)
+2. 保持 0.5 秒
+3. 写入 `False` (释放)
+4. 验证状态
+
+### 2. 避免死锁
+**问题：** PLC 在初始化过程中等待弹窗确认，而代码等待初始化完成  
+**解决：** 在初始化等待循环中实时检测弹窗，一旦出现立即处理
+
+### 3. 超时保护
+- 弹窗检测超时：30 秒（在 `_handle_material_search_dialog` 中）
+- 初始化超时：120 秒（在 `func_pack_device_init_auto_start_combined` 中）
+
+### 4. PyModbus 3.x API 兼容
+所有 Modbus 操作使用 keyword arguments：
+```python
+# 读取
+client.read_coils(address=5176, count=1)
+
+# 写入
+client.write_coil(address=5184, value=True)
+```
+
+## 向后兼容性
+
+### 保留的原有函数
+- `func_pack_device_init()` - 单独的初始化函数，不包含弹窗处理
+- 仍可在 YAML 中通过 `auto-func_pack_device_init` 调用
+- 用于不需要自动处理弹窗的场景
+
+### 新增的功能
+- 在 `func_pack_device_init_auto_start_combined()` 中集成弹窗处理
+- 通过参数控制，默认行为与之前兼容（点击"否"）
+
+## 验证测试
+
+### 测试场景
+
+#### 场景 1：默认参数（不启用物料搜寻）
+```bash
+# 调用时不传参数
+BatteryStation/auto-func_pack_device_init_auto_start_combined: {}
+```
+**预期结果：**
+- ✅ 检测到弹窗
+- ✅ 自动点击"否"按钮
+- ✅ 初始化完成并启动成功
+
+#### 场景 2：启用物料搜寻
+```bash
+# 设置 material_search_enable=true
+BatteryStation/auto-func_pack_device_init_auto_start_combined:
+  goal:
+    material_search_enable: true
+```
+**预期结果：**
+- ✅ 检测到弹窗
+- ✅ 自动点击"是"按钮
+- ✅ 初始化完成并启动成功
+
+### 实际测试结果
+
+**测试时间：** 2026-01-13 21:32:43  
+**测试参数：** `material_search_enable: false`  
+**测试结果：** ✅ 成功
+
+**关键时间节点：**
+- 21:33:05 - 检测到弹窗
+- 21:33:05 - 按下"否"按钮
+- 21:33:06 - 释放"否"按钮  
+- 21:33:07 - 弹窗处理完成
+- 21:33:08 - 初始化状态完成
+- 21:33:18 - 整个流程完成
+
+**总耗时：** 约 35 秒（包含初始化全过程）
+
+## 注意事项
+
+1. **CSV 配置依赖**
+   - 确保 `coin_cell_assembly_b.csv` 包含 69-71 行的 coil 配置
+   - 地址转换逻辑：`modbus_addr = (csv_addr // 10) * 8 + (csv_addr % 10)`
+
+2. **默认行为**
+   - 默认 `material_search_enable=false`，即不启用物料搜寻
+   - 如需启用，必须显式设置为 `true`
+
+3. **日志级别**
+   - 弹窗检测过程中的 `waiting for init_cmd` 使用 DEBUG 级别
+   - 关键操作（检测到弹窗、按钮操作）使用 INFO 级别
+
+4. **原有函数保留**
+   - `func_pack_device_init()` 仍然可用，但不包含弹窗处理
+   - 如果单独调用此函数，仍需手动处理弹窗
+
+## 文件清单
+
+### 修改的文件
+1. `d:\UniLabdev\Uni-Lab-OS\unilabos\devices\workstation\coin_cell_assembly\coin_cell_assembly.py`
+   - 新增 `_handle_material_search_dialog()` 方法
+   - 修改 `func_pack_device_init_auto_start_combined()` 函数
+
+2. `d:\UniLabdev\Uni-Lab-OS\unilabos\registry\devices\coin_cell_workstation.yaml`
+   - 更新 `auto-func_pack_device_init_auto_start_combined` 配置
+   - 添加 `material_search_enable` 参数说明
+
+3. `d:\UniLabdev\Uni-Lab-OS\unilabos\devices\workstation\coin_cell_assembly\coin_cell_assembly_b.csv`
+   - 第 69-71 行添加三个 coil 配置
+
+### 创建的测试文件（已删除）
+1. `test_material_search_dialog.py` - 物料搜寻弹窗测试脚本
+2. `test_coin_cell_reset.py` - 复位功能测试（更新为 pymodbus 3.x）
+3. `test_unilab_interact.py` - Unilab 交互测试（更新为 pymodbus 3.x）
+
+## 总结
+
+本次更新成功实现了设备初始化过程中物料搜寻确认弹窗的自动化处理，主要优势：
+
+✅ **全自动化** - 无需人工干预  
+✅ **参数可配** - 灵活控制是否启用物料搜寻  
+✅ **实时检测** - 在初始化等待循环中检测，避免死锁  
+✅ **脉冲模式** - 模拟真实按钮操作  
+✅ **向后兼容** - 保留原有函数，不影响现有流程  
+✅ **完整日志** - 详细记录每一步操作  
+✅ **超时保护** - 防止无限等待  
+
+该功能已通过实际测试验证，可投入生产使用。
+
+---
+
+**文档版本：** 1.0  
+**创建日期：** 2026-01-13  
+**作者：** Antigravity AI Assistant  
+**最后更新：** 2026-01-13 21:36

unilabos/devices/workstation/coin_cell_assembly/YB_YH_materials.py

@@ -0,0 +1,645 @@
+"""
+纽扣电池组装工作站物料类定义
+Button Battery Assembly Station Resource Classes
+"""
+
+from __future__ import annotations
+
+from collections import OrderedDict
+from typing import Any, Dict, List, Optional, TypedDict, Union, cast
+
+from pylabrobot.resources.coordinate import Coordinate
+from pylabrobot.resources.container import Container
+from pylabrobot.resources.deck import Deck
+from pylabrobot.resources.itemized_resource import ItemizedResource
+from pylabrobot.resources.resource import Resource
+from pylabrobot.resources.resource_stack import ResourceStack
+from pylabrobot.resources.tip_rack import TipRack, TipSpot
+from pylabrobot.resources.trash import Trash
+from pylabrobot.resources.utils import create_ordered_items_2d
+
+from unilabos.resources.battery.magazine import MagazineHolder_4_Cathode, MagazineHolder_6_Cathode, MagazineHolder_6_Anode, MagazineHolder_6_Battery
+from unilabos.resources.battery.bottle_carriers import YIHUA_Electrolyte_12VialCarrier
+from unilabos.resources.battery.electrode_sheet import ElectrodeSheet
+
+
+
+# TODO: 这个应该只能放一个极片
+class MaterialHoleState(TypedDict):
+    diameter: int
+    depth: int
+    max_sheets: int
+    info: Optional[str]  # 附加信息
+
+class MaterialHole(Resource):
+    """料板洞位类"""
+    children: List[ElectrodeSheet] = []
+
+    def __init__(
+        self,
+        name: str,
+        size_x: float,
+        size_y: float,
+        size_z: float,
+        category: str = "material_hole",
+        **kwargs
+    ):
+        super().__init__(
+            name=name,
+            size_x=size_x,
+            size_y=size_y,
+            size_z=size_z,
+            category=category,
+        )
+        self._unilabos_state: MaterialHoleState = MaterialHoleState(
+            diameter=20,
+            depth=10,
+            max_sheets=1,
+            info=None
+        )
+
+    def get_all_sheet_info(self):
+        info_list = []
+        for sheet in self.children:
+            info_list.append(sheet._unilabos_state["info"])
+        return info_list
+    
+    #这个函数函数好像没用，一般不会集中赋值质量
+    def set_all_sheet_mass(self):
+        for sheet in self.children:
+            sheet._unilabos_state["mass"] = 0.5  # 示例：设置质量为0.5g
+
+    def load_state(self, state: Dict[str, Any]) -> None:
+        """格式不变"""
+        super().load_state(state)
+        self._unilabos_state = state
+
+    def serialize_state(self) -> Dict[str, Dict[str, Any]]:
+        """格式不变"""
+        data = super().serialize_state()
+        data.update(self._unilabos_state)  # Container自身的信息，云端物料将保存这一data，本地也通过这里的data进行读写，当前类用来表示这个物料的长宽高大小的属性，而data（state用来表示物料的内容，细节等）
+        return data
+    #移动极片前先取出对象
+    def get_sheet_with_name(self, name: str) -> Optional[ElectrodeSheet]:
+        for sheet in self.children:
+            if sheet.name == name:
+                return sheet
+        return None
+
+    def has_electrode_sheet(self) -> bool:
+        """检查洞位是否有极片"""
+        return len(self.children) > 0
+
+    def assign_child_resource(
+        self,
+        resource: ElectrodeSheet,
+        location: Optional[Coordinate],
+        reassign: bool = True,
+    ):
+        """放置极片"""
+        # TODO: 这里要改，diameter找不到，加入._unilabos_state后应该没问题
+        #if resource._unilabos_state["diameter"] > self._unilabos_state["diameter"]:
+        #    raise ValueError(f"极片直径 {resource._unilabos_state['diameter']} 超过洞位直径 {self._unilabos_state['diameter']}")
+        #if len(self.children) >= self._unilabos_state["max_sheets"]:
+        #    raise ValueError(f"洞位已满，无法放置更多极片")
+        super().assign_child_resource(resource, location, reassign)
+
+    # 根据children的编号取物料对象。
+    def get_electrode_sheet_info(self, index: int) -> ElectrodeSheet:
+        return self.children[index]
+
+
+class MaterialPlateState(TypedDict):
+    hole_spacing_x: float
+    hole_spacing_y: float
+    hole_diameter: float
+    info: Optional[str]  # 附加信息
+
+class MaterialPlate(ItemizedResource[MaterialHole]):
+    """料板类 - 4x4个洞位，每个洞位放1个极片"""
+    
+    children: List[MaterialHole]
+
+    def __init__(
+        self,
+        name: str,
+        size_x: float,
+        size_y: float,
+        size_z: float,
+        ordered_items: Optional[Dict[str, MaterialHole]] = None,
+        ordering: Optional[OrderedDict[str, str]] = None,
+        category: str = "material_plate",
+        model: Optional[str] = None,
+        fill: bool = False
+    ):
+        """初始化料板
+
+        Args:
+            name: 料板名称
+            size_x: 长度 (mm)
+            size_y: 宽度 (mm)
+            size_z: 高度 (mm)
+            hole_diameter: 洞直径 (mm)
+            hole_depth: 洞深度 (mm)
+            hole_spacing_x: X方向洞位间距 (mm)
+            hole_spacing_y: Y方向洞位间距 (mm)
+            number: 编号
+            category: 类别
+            model: 型号
+        """
+        self._unilabos_state: MaterialPlateState = MaterialPlateState(
+            hole_spacing_x=24.0,
+            hole_spacing_y=24.0,
+            hole_diameter=20.0,
+            info="",
+        )
+        # 创建4x4的洞位
+        # TODO: 这里要改，对应不同形状
+        holes = create_ordered_items_2d(
+            klass=MaterialHole,
+            num_items_x=4,
+            num_items_y=4,
+            dx=(size_x - 4 * self._unilabos_state["hole_spacing_x"]) / 2,  # 居中
+            dy=(size_y - 4 * self._unilabos_state["hole_spacing_y"]) / 2,  # 居中
+            dz=size_z,
+            item_dx=self._unilabos_state["hole_spacing_x"],
+            item_dy=self._unilabos_state["hole_spacing_y"],
+            size_x = 16,
+            size_y = 16,
+            size_z = 16,
+        )
+        if fill:
+            super().__init__(
+                name=name,
+                size_x=size_x,
+                size_y=size_y,
+                size_z=size_z,
+                ordered_items=holes,
+                category=category,
+                model=model,
+            )
+        else:
+            super().__init__(
+                name=name,
+                size_x=size_x,
+                size_y=size_y,
+                size_z=size_z,
+                ordered_items=ordered_items,
+                ordering=ordering,
+                category=category,
+                model=model,
+            )
+
+    def update_locations(self):
+        # TODO:调多次相加
+        holes = create_ordered_items_2d(
+            klass=MaterialHole,
+            num_items_x=4,
+            num_items_y=4,
+            dx=(self._size_x - 3 * self._unilabos_state["hole_spacing_x"]) / 2,  # 居中
+            dy=(self._size_y - 3 * self._unilabos_state["hole_spacing_y"]) / 2,  # 居中
+            dz=self._size_z,
+            item_dx=self._unilabos_state["hole_spacing_x"],
+            item_dy=self._unilabos_state["hole_spacing_y"],
+            size_x = 1,
+            size_y = 1,
+            size_z = 1,
+        )
+        for item, original_item in zip(holes.items(), self.children):
+            original_item.location = item[1].location
+
+
+class PlateSlot(ResourceStack):
+    """板槽位类 - 1个槽上能堆放8个板，移板只能操作最上方的板"""
+
+    def __init__(
+        self,
+        name: str,
+        size_x: float,
+        size_y: float,
+        size_z: float,
+        max_plates: int = 8,
+        category: str = "plate_slot",
+        model: Optional[str] = None
+    ):
+        """初始化板槽位
+
+        Args:
+            name: 槽位名称
+            max_plates: 最大板数量
+            category: 类别
+        """
+        super().__init__(
+            name=name,
+            direction="z",  # Z方向堆叠
+            resources=[],
+        )
+        self.max_plates = max_plates
+        self.category = category
+
+    def can_add_plate(self) -> bool:
+        """检查是否可以添加板"""
+        return len(self.children) < self.max_plates
+
+    def add_plate(self, plate: MaterialPlate) -> None:
+        """添加料板"""
+        if not self.can_add_plate():
+            raise ValueError(f"槽位 {self.name} 已满，无法添加更多板")
+        self.assign_child_resource(plate)
+
+    def get_top_plate(self) -> MaterialPlate:
+        """获取最上方的板"""
+        if len(self.children) == 0:
+            raise ValueError(f"槽位 {self.name} 为空")
+        return cast(MaterialPlate, self.get_top_item())
+
+    def take_top_plate(self) -> MaterialPlate:
+        """取出最上方的板"""
+        top_plate = self.get_top_plate()
+        self.unassign_child_resource(top_plate)
+        return top_plate
+
+    def can_access_for_picking(self) -> bool:
+        """检查是否可以进行取料操作（只有最上方的板能进行取料操作）"""
+        return len(self.children) > 0
+
+    def serialize(self) -> dict:
+        return {
+            **super().serialize(),
+            "max_plates": self.max_plates,
+        }
+
+
+#是一种类型注解，不用self
+class BatteryState(TypedDict):
+    """电池状态字典"""
+    diameter: float
+    height: float
+    assembly_pressure: float
+    electrolyte_volume: float
+    electrolyte_name: str
+
+class Battery(Resource):
+    """电池类 - 可容纳极片"""
+    children: List[ElectrodeSheet] = []
+
+    def __init__(
+        self,
+        name: str,
+        size_x=1,
+        size_y=1,
+        size_z=1,
+        category: str = "battery",
+    ):
+        """初始化电池
+
+        Args:
+            name: 电池名称
+            diameter: 直径 (mm)
+            height: 高度 (mm)
+            max_volume: 最大容量 (μL)
+            barcode: 二维码编号
+            category: 类别
+            model: 型号
+        """
+        super().__init__(
+            name=name,
+            size_x=1,
+            size_y=1,
+            size_z=1,
+            category=category,
+        )
+        self._unilabos_state: BatteryState = BatteryState(
+                                 diameter = 1.0,
+                                 height = 1.0,
+                                 assembly_pressure = 1.0,
+                                 electrolyte_volume = 1.0,
+                                 electrolyte_name = "DP001"
+                                 )
+
+    def add_electrolyte_with_bottle(self, bottle: Bottle) -> bool:
+        to_add_name = bottle._unilabos_state["electrolyte_name"]
+        if bottle.aspirate_electrolyte(10):
+            if self.add_electrolyte(to_add_name, 10):
+                pass
+            else:
+                bottle._unilabos_state["electrolyte_volume"] += 10
+
+    def set_electrolyte(self, name: str, volume: float) -> None:
+        """设置电解液信息"""
+        self._unilabos_state["electrolyte_name"] = name
+        self._unilabos_state["electrolyte_volume"] = volume
+    #这个应该没用，不会有加了后再加的事情
+    def add_electrolyte(self, name: str, volume: float) -> bool:
+        """添加电解液信息"""
+        if name != self._unilabos_state["electrolyte_name"]:
+            return False
+        self._unilabos_state["electrolyte_volume"] += volume
+
+    def load_state(self, state: Dict[str, Any]) -> None:
+        """格式不变"""
+        super().load_state(state)
+        self._unilabos_state = state
+
+    def serialize_state(self) -> Dict[str, Dict[str, Any]]:
+        """格式不变"""
+        data = super().serialize_state()
+        data.update(self._unilabos_state)  # Container自身的信息，云端物料将保存这一data，本地也通过这里的data进行读写，当前类用来表示这个物料的长宽高大小的属性，而data（state用来表示物料的内容，细节等）
+        return data
+
+# 电解液作为属性放进去
+
+class BatteryPressSlotState(TypedDict):
+    """电池状态字典"""
+    diameter: float =20.0
+    depth: float = 4.0
+
+class BatteryPressSlot(Resource):
+    """电池压制槽类 - 设备，可容纳一个电池"""
+    children: List[Battery] = []
+
+    def __init__(
+        self,
+        name: str = "BatteryPressSlot",
+        category: str = "battery_press_slot",
+    ):
+        """初始化电池压制槽
+
+        Args:
+            name: 压制槽名称
+            diameter: 直径 (mm)
+            depth: 深度 (mm)
+            category: 类别
+            model: 型号
+        """
+        super().__init__(
+            name=name,
+            size_x=10,
+            size_y=12,
+            size_z=13,
+            category=category,
+        )
+        self._unilabos_state: BatteryPressSlotState = BatteryPressSlotState()
+
+    def has_battery(self) -> bool:
+        """检查是否有电池"""
+        return len(self.children) > 0
+
+    def load_state(self, state: Dict[str, Any]) -> None:
+        """格式不变"""
+        super().load_state(state)
+        self._unilabos_state = state
+
+    def serialize_state(self) -> Dict[str, Dict[str, Any]]:
+        """格式不变"""
+        data = super().serialize_state()
+        data.update(self._unilabos_state)  # Container自身的信息，云端物料将保存这一data，本地也通过这里的data进行读写，当前类用来表示这个物料的长宽高大小的属性，而data（state用来表示物料的内容，细节等）
+        return data
+    
+    def assign_child_resource(
+        self,
+        resource: Battery,
+        location: Optional[Coordinate],
+        reassign: bool = True,
+    ):
+        """放置极片"""
+        # TODO: 让高京看下槽位只有一个电池时是否这么写。
+        if self.has_battery():
+            raise ValueError(f"槽位已含有一个电池，无法再放置其他电池")
+        super().assign_child_resource(resource, location, reassign)
+
+    # 根据children的编号取物料对象。
+    def get_battery_info(self, index: int) -> Battery:
+        return self.children[0]
+
+
+def TipBox64(
+        name: str,
+        size_x: float = 127.8,
+        size_y: float = 85.5,
+        size_z: float = 60.0,
+        category: str = "tip_rack",
+        model: Optional[str] = None,
+):
+    """64孔枪头盒类"""
+    from pylabrobot.resources.tip import Tip
+
+    # 创建12x8=96个枪头位
+    def make_tip():
+        return Tip(
+            has_filter=False,
+            total_tip_length=20.0,
+            maximal_volume=1000,  # 1mL
+            fitting_depth=8.0,
+        )
+
+    tip_spots = create_ordered_items_2d(
+        klass=TipSpot,
+        num_items_x=12,
+        num_items_y=8,
+        dx=8.0,
+        dy=8.0,
+        dz=0.0,
+        item_dx=9.0,
+        item_dy=9.0,
+        size_x=10,
+        size_y=10,
+        size_z=0.0,
+        make_tip=make_tip,
+    )
+    idx_available = list(range(0, 32)) + list(range(64, 96))
+    tip_spots_available = {k: v for i, (k, v) in enumerate(tip_spots.items()) if i in idx_available}
+    tip_rack = TipRack(
+        name=name,
+        size_x=size_x,
+        size_y=size_y,
+        size_z=size_z,
+        # ordered_items=tip_spots_available,
+        ordered_items=tip_spots,
+        category=category,
+        model=model,
+        with_tips=False,
+    )
+    tip_rack.set_tip_state([True]*32 + [False]*32 + [True]*32)  # 前32和后32个有枪头，中间32个无枪头
+    return tip_rack
+
+
+class WasteTipBoxstate(TypedDict):
+    """"废枪头盒状态字典"""
+    max_tips: int = 100
+    tip_count: int = 0
+
+#枪头不是一次性的（同一溶液则反复使用），根据寄存器判断
+class WasteTipBox(Trash):
+    """废枪头盒类 - 100个枪头容量"""
+
+    def __init__(
+        self,
+        name: str,
+        size_x: float = 127.8,
+        size_y: float = 85.5,
+        size_z: float = 60.0,
+        material_z_thickness=0,
+        max_volume=float("inf"),
+        category="trash",
+        model=None,
+        compute_volume_from_height=None,
+        compute_height_from_volume=None,
+    ):
+        """初始化废枪头盒
+
+        Args:
+            name: 废枪头盒名称
+            size_x: 长度 (mm)
+            size_y: 宽度 (mm)
+            size_z: 高度 (mm)
+            max_tips: 最大枪头容量
+            category: 类别
+            model: 型号
+        """
+        super().__init__(
+            name=name,
+            size_x=size_x,
+            size_y=size_y,
+            size_z=size_z,
+            category=category,
+            model=model,
+        )
+        self._unilabos_state: WasteTipBoxstate = WasteTipBoxstate()
+
+    def add_tip(self) -> None:
+        """添加废枪头"""
+        if self._unilabos_state["tip_count"] >= self._unilabos_state["max_tips"]:
+            raise ValueError(f"废枪头盒 {self.name} 已满")
+        self._unilabos_state["tip_count"] += 1
+
+    def get_tip_count(self) -> int:
+        """获取枪头数量"""
+        return self._unilabos_state["tip_count"]
+
+    def empty(self) -> None:
+        """清空废枪头盒"""
+        self._unilabos_state["tip_count"] = 0
+
+
+    def load_state(self, state: Dict[str, Any]) -> None:
+        """格式不变"""
+        super().load_state(state)
+        self._unilabos_state = state
+
+    def serialize_state(self) -> Dict[str, Dict[str, Any]]:
+        """格式不变"""
+        data = super().serialize_state()
+        data.update(self._unilabos_state)  # Container自身的信息，云端物料将保存这一data，本地也通过这里的data进行读写，当前类用来表示这个物料的长宽高大小的属性，而data（state用来表示物料的内容，细节等）
+        return data
+
+
+class CoincellDeck(Deck):
+    """纽扣电池组装工作站台面类"""
+
+    def __init__(
+        self,
+        name: str = "coin_cell_deck",
+        size_x: float = 1450.0,  # 1m
+        size_y: float = 1450.0,  # 1m
+        size_z: float = 100.0,   # 0.9m
+        origin: Coordinate = Coordinate(-2200, 0, 0),
+        category: str = "coin_cell_deck",
+        setup: bool = False,  # 是否自动执行 setup
+    ):
+        """初始化纽扣电池组装工作站台面
+
+        Args:
+            name: 台面名称
+            size_x: 长度 (mm) - 1m
+            size_y: 宽度 (mm) - 1m
+            size_z: 高度 (mm) - 0.9m
+            origin: 原点坐标
+            category: 类别
+            setup: 是否自动执行 setup 配置标准布局
+        """
+        super().__init__(
+            name=name,
+            size_x=1450.0,
+            size_y=1450.0,
+            size_z=100.0,
+            origin=origin,
+        )
+        if setup:
+            self.setup()
+
+    def setup(self) -> None:
+        """设置工作站的标准布局 - 包含子弹夹、料盘、瓶架等完整配置"""
+        # ====================================== 子弹夹 ============================================
+        
+        # 正极片（4个洞位，2x2布局）
+        zhengji_zip = MagazineHolder_4_Cathode("正极&铝箔弹夹")
+        self.assign_child_resource(zhengji_zip, Coordinate(x=402.0, y=830.0, z=0))
+        
+        # 正极壳、平垫片（6个洞位，2x2+2布局）
+        zhengjike_zip = MagazineHolder_6_Cathode("正极壳&平垫片弹夹")
+        self.assign_child_resource(zhengjike_zip, Coordinate(x=566.0, y=272.0, z=0))
+        
+        # 负极壳、弹垫片（6个洞位，2x2+2布局）
+        fujike_zip = MagazineHolder_6_Anode("负极壳&弹垫片弹夹")
+        self.assign_child_resource(fujike_zip, Coordinate(x=474.0, y=276.0, z=0))
+        
+        # 成品弹夹（6个洞位，3x2布局）
+        chengpindanjia_zip = MagazineHolder_6_Battery("成品弹夹")
+        self.assign_child_resource(chengpindanjia_zip, Coordinate(x=260.0, y=156.0, z=0))
+        
+        # ====================================== 物料板 ============================================
+        # 创建物料板（料盘carrier）- 4x4布局
+        # 负极料盘
+        fujiliaopan = MaterialPlate(name="负极料盘", size_x=120, size_y=100, size_z=10.0, fill=True)
+        self.assign_child_resource(fujiliaopan, Coordinate(x=708.0, y=794.0, z=0))
+        # for i in range(16):
+        #     fujipian = ElectrodeSheet(name=f"{fujiliaopan.name}_jipian_{i}", size_x=12, size_y=12, size_z=0.1)
+        #     fujiliaopan.children[i].assign_child_resource(fujipian, location=None)
+
+        # 隔膜料盘
+        gemoliaopan = MaterialPlate(name="隔膜料盘", size_x=120, size_y=100, size_z=10.0, fill=True)
+        self.assign_child_resource(gemoliaopan, Coordinate(x=718.0, y=918.0, z=0))
+        # for i in range(16):
+        #     gemopian = ElectrodeSheet(name=f"{gemoliaopan.name}_jipian_{i}", size_x=12, size_y=12, size_z=0.1)
+        #     gemoliaopan.children[i].assign_child_resource(gemopian, location=None)
+
+        # ====================================== 瓶架、移液枪 ============================================
+        # 在台面上放置 3x4 瓶架、6x2 瓶架 与 64孔移液枪头盒
+        # 奔耀上料5ml分液瓶小板 - 由奔曜跨站转运而来，不单独写，但是这里应该有一个堆栈用于摆放分液瓶小板
+        
+        # bottle_rack_3x4 = BottleRack(
+        #     name="bottle_rack_3x4",
+        #     size_x=210.0,
+        #     size_y=140.0,
+        #     size_z=100.0,
+        #     num_items_x=2,
+        #     num_items_y=4,
+        #     position_spacing=35.0,
+        #     orientation="vertical",
+        # )
+        # self.assign_child_resource(bottle_rack_3x4, Coordinate(x=1542.0, y=717.0, z=0))
+        
+        # 电解液缓存位 - 6x2布局
+        bottle_rack_6x2 = YIHUA_Electrolyte_12VialCarrier(name="bottle_rack_6x2")
+        self.assign_child_resource(bottle_rack_6x2, Coordinate(x=1050.0, y=358.0, z=0))
+        # 电解液回收位6x2
+        bottle_rack_6x2_2 = YIHUA_Electrolyte_12VialCarrier(name="bottle_rack_6x2_2")
+        self.assign_child_resource(bottle_rack_6x2_2, Coordinate(x=914.0, y=358.0, z=0))
+
+        tip_box = TipBox64(name="tip_box_64")
+        self.assign_child_resource(tip_box, Coordinate(x=782.0, y=514.0, z=0))
+
+        waste_tip_box = WasteTipBox(name="waste_tip_box")
+        self.assign_child_resource(waste_tip_box, Coordinate(x=778.0, y=622.0, z=0))
+
+
+def YH_Deck(name=""):
+    cd = CoincellDeck(name=name)
+    cd.setup()
+    return cd
+
+
+if __name__ == "__main__":
+    deck = create_coin_cell_deck()
+    print(deck)

unilabos/devices/workstation/coin_cell_assembly/coin_cell_assembly_b.csv

@@ -0,0 +1,133 @@
+Name,DataType,InitValue,Comment,Attribute,DeviceType,Address,
+COIL_SYS_START_CMD,BOOL,,,,coil,8010,
+COIL_SYS_STOP_CMD,BOOL,,,,coil,8020,
+COIL_SYS_RESET_CMD,BOOL,,,,coil,8030,
+COIL_SYS_HAND_CMD,BOOL,,,,coil,8040,
+COIL_SYS_AUTO_CMD,BOOL,,,,coil,8050,
+COIL_SYS_INIT_CMD,BOOL,,,,coil,8060,
+COIL_UNILAB_SEND_MSG_SUCC_CMD,BOOL,,,,coil,8700,
+COIL_UNILAB_REC_MSG_SUCC_CMD,BOOL,,,,coil,8710,unilab_rec_msg_succ_cmd
+COIL_SYS_START_STATUS,BOOL,,,,coil,8210,
+COIL_SYS_STOP_STATUS,BOOL,,,,coil,8220,
+COIL_SYS_RESET_STATUS,BOOL,,,,coil,8230,
+COIL_SYS_HAND_STATUS,BOOL,,,,coil,8240,
+COIL_SYS_AUTO_STATUS,BOOL,,,,coil,8250,
+COIL_SYS_INIT_STATUS,BOOL,,,,coil,8260,
+COIL_REQUEST_REC_MSG_STATUS,BOOL,,,,coil,8500,
+COIL_REQUEST_SEND_MSG_STATUS,BOOL,,,,coil,8510,request_send_msg_status
+REG_MSG_ELECTROLYTE_USE_NUM,INT16,,,,hold_register,11000,
+REG_MSG_ELECTROLYTE_NUM,INT16,,,,hold_register,11002,unilab_send_msg_electrolyte_num
+REG_MSG_ELECTROLYTE_VOLUME,INT16,,,,hold_register,11004,unilab_send_msg_electrolyte_vol
+REG_MSG_ASSEMBLY_TYPE,INT16,,,,hold_register,11006,unilab_send_msg_assembly_type
+REG_MSG_ASSEMBLY_PRESSURE,INT16,,,,hold_register,11008,unilab_send_msg_assembly_pressure
+REG_DATA_ASSEMBLY_COIN_CELL_NUM,INT16,,,,hold_register,10000,data_assembly_coin_cell_num
+REG_DATA_OPEN_CIRCUIT_VOLTAGE,FLOAT32,,,,hold_register,10002,data_open_circuit_voltage
+REG_DATA_AXIS_X_POS,FLOAT32,,,,hold_register,10004,
+REG_DATA_AXIS_Y_POS,FLOAT32,,,,hold_register,10006,
+REG_DATA_AXIS_Z_POS,FLOAT32,,,,hold_register,10008,
+REG_DATA_POLE_WEIGHT,FLOAT32,,,,hold_register,10010,data_pole_weight
+REG_DATA_ASSEMBLY_PER_TIME,FLOAT32,,,,hold_register,10012,data_assembly_time
+REG_DATA_ASSEMBLY_PRESSURE,INT16,,,,hold_register,10014,data_assembly_pressure
+REG_DATA_ELECTROLYTE_VOLUME,INT16,,,,hold_register,10016,data_electrolyte_volume
+REG_DATA_COIN_NUM,INT16,,,,hold_register,10018,data_coin_num
+REG_DATA_ELECTROLYTE_CODE,STRING,,,,hold_register,10020,data_electrolyte_code()
+REG_DATA_COIN_CELL_CODE,STRING,,,,hold_register,10030,data_coin_cell_code()
+REG_DATA_STACK_VISON_CODE,STRING,,,,hold_register,12004,data_stack_vision_code()
+REG_DATA_GLOVE_BOX_PRESSURE,FLOAT32,,,,hold_register,10050,data_glove_box_pressure
+REG_DATA_GLOVE_BOX_WATER_CONTENT,FLOAT32,,,,hold_register,10052,data_glove_box_water_content
+REG_DATA_GLOVE_BOX_O2_CONTENT,FLOAT32,,,,hold_register,10054,data_glove_box_o2_content
+UNILAB_SEND_ELECTROLYTE_BOTTLE_NUM,BOOL,,,,coil,8720,
+UNILAB_RECE_ELECTROLYTE_BOTTLE_NUM,BOOL,,,,coil,8520,
+REG_MSG_ELECTROLYTE_NUM_USED,INT16,,,,hold_register,496,
+REG_DATA_ELECTROLYTE_USE_NUM,INT16,,,,hold_register,10000,
+UNILAB_SEND_FINISHED_CMD,BOOL,,,,coil,8730,
+UNILAB_RECE_FINISHED_CMD,BOOL,,,,coil,8530,
+REG_DATA_ASSEMBLY_TYPE,INT16,,,,hold_register,10018,ASSEMBLY_TYPE7or8
+REG_UNILAB_INTERACT,BOOL,,,,coil,8450,
+,,,,,coil,8320,
+COIL_ALUMINUM_FOIL,BOOL,,,,coil,8340,
+REG_MSG_NE_PLATE_MATRIX,INT16,,,,hold_register,440,
+REG_MSG_SEPARATOR_PLATE_MATRIX,INT16,,,,hold_register,450,
+REG_MSG_TIP_BOX_MATRIX,INT16,,,,hold_register,480,
+REG_MSG_NE_PLATE_NUM,INT16,,,,hold_register,443,
+REG_MSG_SEPARATOR_PLATE_NUM,INT16,,,,hold_register,453,
+REG_MSG_PRESS_MODE,BOOL,,,,coil,8360,
+,BOOL,,,,coil,8300,
+,BOOL,,,,coil,8310,
+COIL_GB_L_IGNORE_CMD,BOOL,,,,coil,8320,
+COIL_GB_R_IGNORE_CMD,BOOL,,,,coil,8420,
+,BOOL,,,,coil,8350,
+COIL_ELECTROLYTE_DUAL_DROP_MODE,BOOL,,,,coil,8370,
+,BOOL,,,,coil,8380,
+,BOOL,,,,coil,8390,
+,BOOL,,,,coil,8400,
+,BOOL,,,,coil,8410,
+REG_MSG_DUAL_DROP_FIRST_VOLUME,INT16,,,,hold_register,4001,
+COIL_DUAL_DROP_SUCTION_TIMING,BOOL,,,,coil,8430,
+COIL_DUAL_DROP_START_TIMING,BOOL,,,,coil,8470,
+REG_MSG_BATTERY_CLEAN_IGNORE,BOOL,,,,coil,8460,
+COIL_MATERIAL_SEARCH_DIALOG_APPEAR,BOOL,,,,coil,6470,
+COIL_MATERIAL_SEARCH_CONFIRM_YES,BOOL,,,,coil,6480,
+COIL_MATERIAL_SEARCH_CONFIRM_NO,BOOL,,,,coil,6490,
+COIL_ALARM_100_SYSTEM_ERROR,BOOL,,,,coil,1000,异常100-系统异常
+COIL_ALARM_101_EMERGENCY_STOP,BOOL,,,,coil,1010,异常101-急停
+COIL_ALARM_111_GLOVEBOX_EMERGENCY_STOP,BOOL,,,,coil,1110,异常111-手套箱急停
+COIL_ALARM_112_GLOVEBOX_GRATING_BLOCKED,BOOL,,,,coil,1120,异常112-手套箱内光栅遮挡
+COIL_ALARM_160_PIPETTE_TIP_SHORTAGE,BOOL,,,,coil,1600,异常160-移液枪头缺料
+COIL_ALARM_161_POSITIVE_SHELL_SHORTAGE,BOOL,,,,coil,1610,异常161-正极壳缺料
+COIL_ALARM_162_ALUMINUM_FOIL_SHORTAGE,BOOL,,,,coil,1620,异常162-铝箔垫缺料
+COIL_ALARM_163_POSITIVE_PLATE_SHORTAGE,BOOL,,,,coil,1630,异常163-正极片缺料
+COIL_ALARM_164_SEPARATOR_SHORTAGE,BOOL,,,,coil,1640,异常164-隔膜缺料
+COIL_ALARM_165_NEGATIVE_PLATE_SHORTAGE,BOOL,,,,coil,1650,异常165-负极片缺料
+COIL_ALARM_166_FLAT_WASHER_SHORTAGE,BOOL,,,,coil,1660,异常166-平垫缺料
+COIL_ALARM_167_SPRING_WASHER_SHORTAGE,BOOL,,,,coil,1670,异常167-弹垫缺料
+COIL_ALARM_168_NEGATIVE_SHELL_SHORTAGE,BOOL,,,,coil,1680,异常168-负极壳缺料
+COIL_ALARM_169_FINISHED_BATTERY_FULL,BOOL,,,,coil,1690,异常169-成品电池满料
+COIL_ALARM_201_SERVO_AXIS_01_ERROR,BOOL,,,,coil,2010,异常201-伺服轴01异常
+COIL_ALARM_202_SERVO_AXIS_02_ERROR,BOOL,,,,coil,2020,异常202-伺服轴02异常
+COIL_ALARM_203_SERVO_AXIS_03_ERROR,BOOL,,,,coil,2030,异常203-伺服轴03异常
+COIL_ALARM_204_SERVO_AXIS_04_ERROR,BOOL,,,,coil,2040,异常204-伺服轴04异常
+COIL_ALARM_205_SERVO_AXIS_05_ERROR,BOOL,,,,coil,2050,异常205-伺服轴05异常
+COIL_ALARM_206_SERVO_AXIS_06_ERROR,BOOL,,,,coil,2060,异常206-伺服轴06异常
+COIL_ALARM_207_SERVO_AXIS_07_ERROR,BOOL,,,,coil,2070,异常207-伺服轴07异常
+COIL_ALARM_208_SERVO_AXIS_08_ERROR,BOOL,,,,coil,2080,异常208-伺服轴08异常
+COIL_ALARM_209_SERVO_AXIS_09_ERROR,BOOL,,,,coil,2090,异常209-伺服轴09异常
+COIL_ALARM_210_SERVO_AXIS_10_ERROR,BOOL,,,,coil,2100,异常210-伺服轴10异常
+COIL_ALARM_211_SERVO_AXIS_11_ERROR,BOOL,,,,coil,2110,异常211-伺服轴11异常
+COIL_ALARM_212_SERVO_AXIS_12_ERROR,BOOL,,,,coil,2120,异常212-伺服轴12异常
+COIL_ALARM_213_SERVO_AXIS_13_ERROR,BOOL,,,,coil,2130,异常213-伺服轴13异常
+COIL_ALARM_214_SERVO_AXIS_14_ERROR,BOOL,,,,coil,2140,异常214-伺服轴14异常
+COIL_ALARM_250_OTHER_COMPONENT_ERROR,BOOL,,,,coil,2500,异常250-其他元件异常
+COIL_ALARM_251_PIPETTE_COMM_ERROR,BOOL,,,,coil,2510,异常251-移液枪通讯异常
+COIL_ALARM_252_PIPETTE_ALARM,BOOL,,,,coil,2520,异常252-移液枪报警
+COIL_ALARM_256_ELECTRIC_GRIPPER_ERROR,BOOL,,,,coil,2560,异常256-电爪异常
+COIL_ALARM_262_RB_UNKNOWN_POSITION_ERROR,BOOL,,,,coil,2620,异常262-RB报警：未知点位错误
+COIL_ALARM_263_RB_XYZ_PARAM_LIMIT_ERROR,BOOL,,,,coil,2630,异常263-RB报警：X、Y、Z参数超限制
+COIL_ALARM_264_RB_VISION_PARAM_ERROR,BOOL,,,,coil,2640,异常264-RB报警：视觉参数误差过大
+COIL_ALARM_265_RB_NOZZLE_1_PICK_FAIL,BOOL,,,,coil,2650,异常265-RB报警：1#吸嘴取料失败
+COIL_ALARM_266_RB_NOZZLE_2_PICK_FAIL,BOOL,,,,coil,2660,异常266-RB报警：2#吸嘴取料失败
+COIL_ALARM_267_RB_NOZZLE_3_PICK_FAIL,BOOL,,,,coil,2670,异常267-RB报警：3#吸嘴取料失败
+COIL_ALARM_268_RB_NOZZLE_4_PICK_FAIL,BOOL,,,,coil,2680,异常268-RB报警：4#吸嘴取料失败
+COIL_ALARM_269_RB_TRAY_PICK_FAIL,BOOL,,,,coil,2690,异常269-RB报警：取物料盘失败
+COIL_ALARM_280_RB_COLLISION_ERROR,BOOL,,,,coil,2800,异常280-RB碰撞异常
+COIL_ALARM_290_VISION_SYSTEM_COMM_ERROR,BOOL,,,,coil,2900,异常290-视觉系统通讯异常
+COIL_ALARM_291_VISION_ALIGNMENT_NG,BOOL,,,,coil,2910,异常291-视觉对位NG异常
+COIL_ALARM_292_BARCODE_SCANNER_COMM_ERROR,BOOL,,,,coil,2920,异常292-扫码枪通讯异常
+COIL_ALARM_310_OCV_TRANSFER_NOZZLE_SUCTION_ERROR,BOOL,,,,coil,3100,异常310-开电移载吸嘴吸真空异常
+COIL_ALARM_311_OCV_TRANSFER_NOZZLE_BREAK_ERROR,BOOL,,,,coil,3110,异常311-开电移载吸嘴破真空异常
+COIL_ALARM_312_WEIGHT_TRANSFER_NOZZLE_SUCTION_ERROR,BOOL,,,,coil,3120,异常312-称重移载吸嘴吸真空异常
+COIL_ALARM_313_WEIGHT_TRANSFER_NOZZLE_BREAK_ERROR,BOOL,,,,coil,3130,异常313-称重移载吸嘴破真空异常
+COIL_ALARM_340_OCV_NOZZLE_TRANSFER_CYLINDER_ERROR,BOOL,,,,coil,3400,异常340-开路电压吸嘴移载气缸异常
+COIL_ALARM_342_OCV_NOZZLE_LIFT_CYLINDER_ERROR,BOOL,,,,coil,3420,异常342-开路电压吸嘴升降气缸异常
+COIL_ALARM_344_OCV_CRIMPING_CYLINDER_ERROR,BOOL,,,,coil,3440,异常344-开路电压旋压气缸异常
+COIL_ALARM_350_WEIGHT_NOZZLE_TRANSFER_CYLINDER_ERROR,BOOL,,,,coil,3500,异常350-称重吸嘴移载气缸异常
+COIL_ALARM_352_WEIGHT_NOZZLE_LIFT_CYLINDER_ERROR,BOOL,,,,coil,3520,异常352-称重吸嘴升降气缸异常
+COIL_ALARM_354_CLEANING_CLOTH_TRANSFER_CYLINDER_ERROR,BOOL,,,,coil,3540,异常354-清洗无尘布移载气缸异常
+COIL_ALARM_356_CLEANING_CLOTH_PRESS_CYLINDER_ERROR,BOOL,,,,coil,3560,异常356-清洗无尘布压紧气缸异常
+COIL_ALARM_360_ELECTROLYTE_BOTTLE_POSITION_CYLINDER_ERROR,BOOL,,,,coil,3600,异常360-电解液瓶定位气缸异常
+COIL_ALARM_362_PIPETTE_TIP_BOX_POSITION_CYLINDER_ERROR,BOOL,,,,coil,3620,异常362-移液枪头盒定位气缸异常
+COIL_ALARM_364_REAGENT_BOTTLE_GRIPPER_LIFT_CYLINDER_ERROR,BOOL,,,,coil,3640,异常364-试剂瓶夹爪升降气缸异常
+COIL_ALARM_366_REAGENT_BOTTLE_GRIPPER_CYLINDER_ERROR,BOOL,,,,coil,3660,异常366-试剂瓶夹爪气缸异常
+COIL_ALARM_370_PRESS_MODULE_BLOW_CYLINDER_ERROR,BOOL,,,,coil,3700,异常370-压制模块吹气气缸异常
+COIL_ALARM_151_ELECTROLYTE_BOTTLE_POSITION_ERROR,BOOL,,,,coil,1510,异常151-电解液瓶定位在籍异常
+COIL_ALARM_152_ELECTROLYTE_BOTTLE_CAP_ERROR,BOOL,,,,coil,1520,异常152-电解液瓶盖在籍异常

unilabos/devices/workstation/workstation_http_service.py

@@ -459,12 +459,12 @@ class WorkstationHTTPHandler(BaseHTTPRequestHandler):
             # 验证必需字段
             if 'brand' in request_data:
                 if request_data['brand'] == "bioyond":  # 奔曜
-                    error_msg = request_data["text"]
+                    material_data = request_data["text"]
-                    logger.info(f"收到奔曜错误处理报送: {error_msg}")
+                    logger.info(f"收到奔曜物料变更报送: {material_data}")
                     return HttpResponse(
                         success=True,
-                        message=f"错误处理报送已收到: {error_msg}",
+                        message=f"物料变更报送已收到: {material_data}",
-                        acknowledgment_id=f"ERROR_{int(time.time() * 1000)}_{error_msg.get('action_id', 'unknown')}",
+                        acknowledgment_id=f"MATERIAL_{int(time.time() * 1000)}_{material_data.get('id', 'unknown')}",
                         data=None
                     )
             else:

unilabos/registry/decorators.py

@@ -0,0 +1,614 @@
+"""
+装饰器注册表系统
+
+通过 @device, @action, @resource 装饰器替代 YAML 配置文件来定义设备/动作/资源注册表信息。
+
+Usage:
+    from unilabos.registry.decorators import (
+        device, action, resource,
+        InputHandle, OutputHandle,
+        ActionInputHandle, ActionOutputHandle,
+        HardwareInterface, Side, DataSource,
+    )
+
+    @device(
+        id="solenoid_valve.mock",
+        category=["pump_and_valve"],
+        description="模拟电磁阀设备",
+        handles=[
+            InputHandle(key="in", data_type="fluid", label="in", side=Side.NORTH),
+            OutputHandle(key="out", data_type="fluid", label="out", side=Side.SOUTH),
+        ],
+        hardware_interface=HardwareInterface(
+            name="hardware_interface",
+            read="send_command",
+            write="send_command",
+        ),
+    )
+    class SolenoidValveMock:
+        @action(action_type=EmptyIn)
+        def close(self):
+            ...
+
+        @action(
+            handles=[
+                ActionInputHandle(key="in", data_type="fluid", label="in"),
+                ActionOutputHandle(key="out", data_type="fluid", label="out"),
+            ],
+        )
+        def set_valve_position(self, position):
+            ...
+
+        # 无 @action 装饰器 => auto- 前缀动作
+        def is_open(self):
+            ...
+"""
+
+from enum import Enum
+from functools import wraps
+from typing import Any, Callable, Dict, List, Optional, TypeVar
+
+from pydantic import BaseModel, ConfigDict, Field
+
+F = TypeVar("F", bound=Callable[..., Any])
+
+# ---------------------------------------------------------------------------
+# 枚举
+# ---------------------------------------------------------------------------
+
+
+class Side(str, Enum):
+    """UI 上 Handle 的显示位置"""
+
+    NORTH = "NORTH"
+    SOUTH = "SOUTH"
+    EAST = "EAST"
+    WEST = "WEST"
+
+
+class DataSource(str, Enum):
+    """Handle 的数据来源"""
+
+    HANDLE = "handle"  # 从上游 handle 获取数据 (用于 InputHandle)
+    EXECUTOR = "executor"  # 从执行器输出数据 (用于 OutputHandle)
+
+
+# ---------------------------------------------------------------------------
+# Device / Resource Handle (设备/资源级别端口, 序列化时包含 io_type)
+# ---------------------------------------------------------------------------
+
+
+class _DeviceHandleBase(BaseModel):
+    """设备/资源端口基类 (内部使用)"""
+
+    model_config = ConfigDict(populate_by_name=True)
+
+    key: str = Field(serialization_alias="handler_key")
+    data_type: str
+    label: str
+    side: Optional[Side] = None
+    data_key: Optional[str] = None
+    data_source: Optional[str] = None
+    description: Optional[str] = None
+
+    # 子类覆盖
+    io_type: str = ""
+
+    def to_registry_dict(self) -> Dict[str, Any]:
+        return self.model_dump(by_alias=True, exclude_none=True)
+
+
+class InputHandle(_DeviceHandleBase):
+    """
+    输入端口 (io_type="target"), 用于 @device / @resource handles
+
+    Example:
+        InputHandle(key="in", data_type="fluid", label="in", side=Side.NORTH)
+    """
+
+    io_type: str = "target"
+
+
+class OutputHandle(_DeviceHandleBase):
+    """
+    输出端口 (io_type="source"), 用于 @device / @resource handles
+
+    Example:
+        OutputHandle(key="out", data_type="fluid", label="out", side=Side.SOUTH)
+    """
+
+    io_type: str = "source"
+
+
+# ---------------------------------------------------------------------------
+# Action Handle (动作级别端口, 序列化时不含 io_type, 按类型自动分组)
+# ---------------------------------------------------------------------------
+
+
+class _ActionHandleBase(BaseModel):
+    """动作端口基类 (内部使用)"""
+
+    model_config = ConfigDict(populate_by_name=True)
+
+    key: str = Field(serialization_alias="handler_key")
+    data_type: str
+    label: str
+    side: Optional[Side] = None
+    data_key: Optional[str] = None
+    data_source: Optional[str] = None
+    description: Optional[str] = None
+    io_type: Optional[str] = None  # source/sink (dataflow) or target/source (device-style)
+
+    def to_registry_dict(self) -> Dict[str, Any]:
+        return self.model_dump(by_alias=True, exclude_none=True)
+
+
+class ActionInputHandle(_ActionHandleBase):
+    """
+    动作输入端口, 用于 @action handles, 序列化后归入 "input" 组
+
+    Example:
+        ActionInputHandle(
+            key="material_input", data_type="workbench_material",
+            label="物料编号", data_key="material_number", data_source="handle",
+        )
+    """
+
+    pass
+
+
+class ActionOutputHandle(_ActionHandleBase):
+    """
+    动作输出端口, 用于 @action handles, 序列化后归入 "output" 组
+
+    Example:
+        ActionOutputHandle(
+            key="station_output", data_type="workbench_station",
+            label="加热台ID", data_key="station_id", data_source="executor",
+        )
+    """
+
+    pass
+
+
+# ---------------------------------------------------------------------------
+# HardwareInterface
+# ---------------------------------------------------------------------------
+
+
+class HardwareInterface(BaseModel):
+    """
+    硬件通信接口定义
+
+    描述设备与底层硬件通信的方式 (串口、Modbus 等)。
+
+    Example:
+        HardwareInterface(name="hardware_interface", read="send_command", write="send_command")
+    """
+
+    name: str
+    read: Optional[str] = None
+    write: Optional[str] = None
+    extra_info: Optional[List[str]] = None
+
+
+# ---------------------------------------------------------------------------
+# 全局注册表 -- 记录所有被装饰器标记的类/函数
+# ---------------------------------------------------------------------------
+_registered_devices: Dict[str, type] = {}  # device_id -> class
+_registered_resources: Dict[str, Any] = {}  # resource_id -> class or function
+
+
+def _device_handles_to_list(
+    handles: Optional[List[_DeviceHandleBase]],
+) -> List[Dict[str, Any]]:
+    """将设备/资源 Handle 列表序列化为字典列表 (含 io_type)"""
+    if handles is None:
+        return []
+    return [h.to_registry_dict() for h in handles]
+
+
+def _action_handles_to_dict(
+    handles: Optional[List[_ActionHandleBase]],
+) -> Dict[str, Any]:
+    """
+    将动作 Handle 列表序列化为 {"input": [...], "output": [...]} 格式。
+
+    ActionInputHandle => "input", ActionOutputHandle => "output"
+    """
+    if handles is None:
+        return {}
+    input_list = [h.to_registry_dict() for h in handles if isinstance(h, ActionInputHandle)]
+    output_list = [h.to_registry_dict() for h in handles if isinstance(h, ActionOutputHandle)]
+    result: Dict[str, Any] = {}
+    if input_list:
+        result["input"] = input_list
+    if output_list:
+        result["output"] = output_list
+    return result
+
+
+# ---------------------------------------------------------------------------
+# @device 类装饰器
+# ---------------------------------------------------------------------------
+
+
+# noinspection PyShadowingBuiltins
+def device(
+    id: Optional[str] = None,
+    ids: Optional[List[str]] = None,
+    id_meta: Optional[Dict[str, Dict[str, Any]]] = None,
+    category: Optional[List[str]] = None,
+    description: str = "",
+    display_name: str = "",
+    icon: str = "",
+    version: str = "1.0.0",
+    handles: Optional[List[_DeviceHandleBase]] = None,
+    model: Optional[Dict[str, Any]] = None,
+    device_type: str = "python",
+    hardware_interface: Optional[HardwareInterface] = None,
+):
+    """
+    设备类装饰器
+
+    将类标记为一个 UniLab-OS 设备，并附加注册表元数据。
+
+    支持两种模式:
+      1. 单设备: id="xxx", category=[...]
+      2. 多设备: ids=["id1","id2"], id_meta={"id1":{handles:[...]}, "id2":{...}}
+
+    Args:
+        id: 单设备时的注册表唯一标识
+        ids: 多设备时的 id 列表，与 id_meta 配合使用
+        id_meta: 每个 device_id 的覆盖元数据 (handles/description/icon/model)
+        category: 设备分类标签列表 (必填)
+        description: 设备描述
+        display_name: 人类可读的设备显示名称，缺失时默认使用 id
+        icon: 图标路径
+        version: 版本号
+        handles: 设备端口列表 (单设备或 id_meta 未覆盖时使用)
+        model: 可选的 3D 模型配置
+        device_type: 设备实现类型 ("python" / "ros2")
+        hardware_interface: 硬件通信接口 (HardwareInterface)
+    """
+    # Resolve device ids
+    if ids is not None:
+        device_ids = list(ids)
+        if not device_ids:
+            raise ValueError("@device ids 不能为空")
+        id_meta = id_meta or {}
+    elif id is not None:
+        device_ids = [id]
+        id_meta = {}
+    else:
+        raise ValueError("@device 必须提供 id 或 ids")
+
+    if category is None:
+        raise ValueError("@device category 必填")
+
+    base_meta = {
+        "category": category,
+        "description": description,
+        "display_name": display_name,
+        "icon": icon,
+        "version": version,
+        "handles": _device_handles_to_list(handles),
+        "model": model,
+        "device_type": device_type,
+        "hardware_interface": (hardware_interface.model_dump(exclude_none=True) if hardware_interface else None),
+    }
+
+    def decorator(cls):
+        cls._device_registry_meta = base_meta
+        cls._device_registry_id_meta = id_meta
+        cls._device_registry_ids = device_ids
+
+        for did in device_ids:
+            if did in _registered_devices:
+                raise ValueError(f"@device id 重复: '{did}' 已被 {_registered_devices[did]} 注册")
+            _registered_devices[did] = cls
+
+        return cls
+
+    return decorator
+
+
+# ---------------------------------------------------------------------------
+# @action 方法装饰器
+# ---------------------------------------------------------------------------
+
+# 区分 "用户没传 action_type" 和 "用户传了 None"
+_ACTION_TYPE_UNSET = object()
+
+
+# noinspection PyShadowingNames
+def action(
+    action_type: Any = _ACTION_TYPE_UNSET,
+    goal: Optional[Dict[str, str]] = None,
+    feedback: Optional[Dict[str, str]] = None,
+    result: Optional[Dict[str, str]] = None,
+    handles: Optional[List[_ActionHandleBase]] = None,
+    goal_default: Optional[Dict[str, Any]] = None,
+    placeholder_keys: Optional[Dict[str, str]] = None,
+    always_free: bool = False,
+    is_protocol: bool = False,
+    description: str = "",
+    auto_prefix: bool = False,
+    parent: bool = False,
+):
+    """
+    动作方法装饰器
+
+    标记方法为注册表动作。有三种用法:
+      1. @action(action_type=EmptyIn, ...)  -- 非 auto, 使用指定 ROS Action 类型
+      2. @action()                          -- 非 auto, UniLabJsonCommand (从方法签名生成 schema)
+      3. 不加 @action                       -- auto- 前缀, UniLabJsonCommand
+
+    Protocol 用法:
+      @action(action_type=Add, is_protocol=True)
+      def AddProtocol(self): ...
+      标记该动作为高级协议 (protocol)，运行时通过 ROS Action 路由到
+      protocol generator 执行。action_type 指向 unilabos_msgs 的 Action 类型。
+
+    Args:
+        action_type: ROS Action 消息类型 (如 EmptyIn, SendCmd, HeatChill).
+                     不传/默认 = UniLabJsonCommand (非 auto).
+        goal: Goal 字段映射 (ROS字段名 -> 设备参数名).
+              protocol 模式下可留空，系统自动生成 identity 映射.
+        feedback: Feedback 字段映射
+        result: Result 字段映射
+        handles: 动作端口列表 (ActionInputHandle / ActionOutputHandle)
+        goal_default: Goal 字段默认值映射 (字段名 -> 默认值), 与自动生成的 goal_default 合并
+        placeholder_keys: 参数占位符配置
+        always_free: 是否为永久闲置动作 (不受排队限制)
+        is_protocol: 是否为工作站协议 (protocol)。True 时运行时走 protocol generator 路径。
+        description: 动作描述
+        auto_prefix: 若为 True，动作名使用 auto-{method_name} 形式（与无 @action 时一致）
+        parent: 若为 True，当方法参数为空 (*args, **kwargs) 时，通过 MRO 从父类获取真实方法参数
+    """
+
+    def decorator(func: F) -> F:
+        @wraps(func)
+        def wrapper(*args, **kwargs):
+            return func(*args, **kwargs)
+
+        # action_type 为哨兵值 => 用户没传, 视为 None (UniLabJsonCommand)
+        resolved_type = None if action_type is _ACTION_TYPE_UNSET else action_type
+
+        meta = {
+            "action_type": resolved_type,
+            "goal": goal or {},
+            "feedback": feedback or {},
+            "result": result or {},
+            "handles": _action_handles_to_dict(handles),
+            "goal_default": goal_default or {},
+            "placeholder_keys": placeholder_keys or {},
+            "always_free": always_free,
+            "is_protocol": is_protocol,
+            "description": description,
+            "auto_prefix": auto_prefix,
+            "parent": parent,
+        }
+        wrapper._action_registry_meta = meta  # type: ignore[attr-defined]
+
+        # 设置 _is_always_free 保持与旧 @always_free 装饰器兼容
+        if always_free:
+            wrapper._is_always_free = True  # type: ignore[attr-defined]
+
+        return wrapper  # type: ignore[return-value]
+
+    return decorator
+
+
+def get_action_meta(func) -> Optional[Dict[str, Any]]:
+    """获取方法上的 @action 装饰器元数据"""
+    return getattr(func, "_action_registry_meta", None)
+
+
+def has_action_decorator(func) -> bool:
+    """检查函数是否带有 @action 装饰器"""
+    return hasattr(func, "_action_registry_meta")
+
+
+# ---------------------------------------------------------------------------
+# @resource 类/函数装饰器
+# ---------------------------------------------------------------------------
+
+
+def resource(
+    id: str,
+    category: List[str],
+    description: str = "",
+    icon: str = "",
+    version: str = "1.0.0",
+    handles: Optional[List[_DeviceHandleBase]] = None,
+    model: Optional[Dict[str, Any]] = None,
+    class_type: str = "pylabrobot",
+):
+    """
+    资源类/函数装饰器
+
+    将类或工厂函数标记为一个 UniLab-OS 资源，附加注册表元数据。
+
+    Args:
+        id: 注册表唯一标识 (必填, 不可重复)
+        category: 资源分类标签列表 (必填)
+        description: 资源描述
+        icon: 图标路径
+        version: 版本号
+        handles: 端口列表 (InputHandle / OutputHandle)
+        model: 可选的 3D 模型配置
+        class_type: 资源实现类型 ("python" / "pylabrobot" / "unilabos")
+    """
+
+    def decorator(obj):
+        meta = {
+            "resource_id": id,
+            "category": category,
+            "description": description,
+            "icon": icon,
+            "version": version,
+            "handles": _device_handles_to_list(handles),
+            "model": model,
+            "class_type": class_type,
+        }
+        obj._resource_registry_meta = meta
+
+        if id in _registered_resources:
+            raise ValueError(f"@resource id 重复: '{id}' 已被 {_registered_resources[id]} 注册")
+        _registered_resources[id] = obj
+
+        return obj
+
+    return decorator
+
+
+def get_device_meta(cls, device_id: Optional[str] = None) -> Optional[Dict[str, Any]]:
+    """
+    获取类上的 @device 装饰器元数据。
+
+    当 device_id 存在且类使用 ids+id_meta 时，返回合并后的 meta
+    (base_meta 与 id_meta[device_id] 深度合并)。
+    """
+    base = getattr(cls, "_device_registry_meta", None)
+    if base is None:
+        return None
+    id_meta = getattr(cls, "_device_registry_id_meta", None) or {}
+    if device_id is None or device_id not in id_meta:
+        result = dict(base)
+        ids = getattr(cls, "_device_registry_ids", None)
+        result["device_id"] = device_id if device_id is not None else (ids[0] if ids else None)
+        return result
+
+    overrides = id_meta[device_id]
+    result = dict(base)
+    result["device_id"] = device_id
+    for key in ["handles", "description", "icon", "model"]:
+        if key in overrides:
+            val = overrides[key]
+            if key == "handles" and isinstance(val, list):
+                # handles 必须是 Handle 对象列表
+                result[key] = [h.to_registry_dict() for h in val]
+            else:
+                result[key] = val
+    return result
+
+
+def get_resource_meta(obj) -> Optional[Dict[str, Any]]:
+    """获取对象上的 @resource 装饰器元数据"""
+    return getattr(obj, "_resource_registry_meta", None)
+
+
+def get_all_registered_devices() -> Dict[str, type]:
+    """获取所有已注册的设备类"""
+    return _registered_devices.copy()
+
+
+def get_all_registered_resources() -> Dict[str, Any]:
+    """获取所有已注册的资源"""
+    return _registered_resources.copy()
+
+
+def clear_registry():
+    """清空全局注册表 (用于测试)"""
+    _registered_devices.clear()
+    _registered_resources.clear()
+
+
+# ---------------------------------------------------------------------------
+# topic_config / not_action / always_free 装饰器
+# ---------------------------------------------------------------------------
+
+
+def topic_config(
+    period: Optional[float] = None,
+    print_publish: Optional[bool] = None,
+    qos: Optional[int] = None,
+    name: Optional[str] = None,
+) -> Callable[[F], F]:
+    """
+    Topic发布配置装饰器
+
+    用于装饰 get_{attr_name} 方法或 @property，控制对应属性的ROS topic发布行为。
+
+    Args:
+        period: 发布周期（秒）。None 表示使用默认值 5.0
+        print_publish: 是否打印发布日志。None 表示使用节点默认配置
+        qos: QoS深度配置。None 表示使用默认值 10
+        name: 自定义发布名称。None 表示使用方法名（去掉 get_ 前缀）
+
+    Note:
+        与 @property 连用时，@topic_config 必须放在 @property 下面，
+        这样装饰器执行顺序为：先 topic_config 添加配置，再 property 包装。
+    """
+
+    def decorator(func: F) -> F:
+        @wraps(func)
+        def wrapper(*args, **kwargs):
+            return func(*args, **kwargs)
+
+        wrapper._topic_period = period  # type: ignore[attr-defined]
+        wrapper._topic_print_publish = print_publish  # type: ignore[attr-defined]
+        wrapper._topic_qos = qos  # type: ignore[attr-defined]
+        wrapper._topic_name = name  # type: ignore[attr-defined]
+        wrapper._has_topic_config = True  # type: ignore[attr-defined]
+
+        return wrapper  # type: ignore[return-value]
+
+    return decorator
+
+
+def get_topic_config(func) -> dict:
+    """获取函数上的 topic 配置 (period, print_publish, qos, name)"""
+    if hasattr(func, "_has_topic_config") and getattr(func, "_has_topic_config", False):
+        return {
+            "period": getattr(func, "_topic_period", None),
+            "print_publish": getattr(func, "_topic_print_publish", None),
+            "qos": getattr(func, "_topic_qos", None),
+            "name": getattr(func, "_topic_name", None),
+        }
+    return {}
+
+
+def always_free(func: F) -> F:
+    """
+    标记动作为永久闲置(不受busy队列限制)的装饰器
+
+    被此装饰器标记的 action 方法，在执行时不会受到设备级别的排队限制，
+    任何时候请求都可以立即执行。适用于查询类、状态读取类等轻量级操作。
+    """
+
+    @wraps(func)
+    def wrapper(*args, **kwargs):
+        return func(*args, **kwargs)
+
+    wrapper._is_always_free = True  # type: ignore[attr-defined]
+
+    return wrapper  # type: ignore[return-value]
+
+
+def is_always_free(func) -> bool:
+    """检查函数是否被标记为永久闲置"""
+    return getattr(func, "_is_always_free", False)
+
+
+def not_action(func: F) -> F:
+    """
+    标记方法为非动作的装饰器
+
+    用于装饰 driver 类中的方法，使其在注册表扫描时不被识别为动作。
+    适用于辅助方法、内部工具方法等不应暴露为设备动作的公共方法。
+    """
+
+    @wraps(func)
+    def wrapper(*args, **kwargs):
+        return func(*args, **kwargs)
+
+    wrapper._is_not_action = True  # type: ignore[attr-defined]
+
+    return wrapper  # type: ignore[return-value]
+
+
+def is_not_action(func) -> bool:
+    """检查函数是否被标记为非动作"""
+    return getattr(func, "_is_not_action", False)

unilabos/registry/device_comms/communication_devices.yaml

@@ -96,10 +96,13 @@ serial:
           type: string
         port:
           type: string
+        registry_name:
+          type: string
         resource_tracker:
           type: object
       required:
       - device_id
+      - registry_name
       - port
       type: object
     data:

unilabos/registry/devices/Qone_nmr.yaml

@@ -13,21 +13,18 @@ Qone_nmr:
           description: ''
           properties:
             feedback:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: EmptyIn_Feedback
               type: object
             goal:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: EmptyIn_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
-              required:
-              - return_info
               title: EmptyIn_Result
               type: object
           required:
@@ -71,31 +68,6 @@ Qone_nmr:
           title: monitor_folder_for_new_content参数
           type: object
         type: UniLabJsonCommand
-      auto-post_init:
-        feedback: {}
-        goal: {}
-        goal_default:
-          ros_node: null
-        handles: {}
-        placeholder_keys: {}
-        result: {}
-        schema:
-          description: ''
-          properties:
-            feedback: {}
-            goal:
-              properties:
-                ros_node:
-                  type: string
-              required:
-              - ros_node
-              type: object
-            result: {}
-          required:
-          - goal
-          title: post_init参数
-          type: object
-        type: UniLabJsonCommand
       auto-strings_to_txt:
         feedback: {}
         goal: {}
@@ -138,21 +110,18 @@ Qone_nmr:
           description: ''
           properties:
             feedback:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: EmptyIn_Feedback
               type: object
             goal:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: EmptyIn_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
-              required:
-              - return_info
               title: EmptyIn_Result
               type: object
           required:
@@ -167,32 +136,31 @@ Qone_nmr:
         goal_default:
           string: ''
         handles: {}
-        result: {}
+        placeholder_keys: {}
+        result:
+          return_info: return_info
+          success: success
         schema:
           description: ''
           properties:
             feedback:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: StrSingleInput_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 string:
                   type: string
-              required:
-              - string
               title: StrSingleInput_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
                 success:
                   type: boolean
-              required:
-              - return_info
-              - success
               title: StrSingleInput_Result
               type: object
           required:

unilabos/registry/devices/bioyond.yaml

@@ -1,589 +0,0 @@
-workstation.bioyond_dispensing_station:
-  category:
-  - workstation
-  - bioyond
-  class:
-    action_value_mappings:
-      auto-batch_create_90_10_vial_feeding_tasks:
-        feedback: {}
-        goal: {}
-        goal_default:
-          delay_time: null
-          hold_m_name: null
-          liquid_material_name: NMP
-          speed: null
-          temperature: null
-          titration: null
-        handles: {}
-        placeholder_keys: {}
-        result: {}
-        schema:
-          description: ''
-          properties:
-            feedback: {}
-            goal:
-              properties:
-                delay_time:
-                  type: string
-                hold_m_name:
-                  type: string
-                liquid_material_name:
-                  default: NMP
-                  type: string
-                speed:
-                  type: string
-                temperature:
-                  type: string
-                titration:
-                  type: string
-              required:
-              - titration
-              type: object
-            result: {}
-          required:
-          - goal
-          title: batch_create_90_10_vial_feeding_tasks参数
-          type: object
-        type: UniLabJsonCommand
-      auto-batch_create_diamine_solution_tasks:
-        feedback: {}
-        goal: {}
-        goal_default:
-          delay_time: null
-          liquid_material_name: NMP
-          solutions: null
-          speed: null
-          temperature: null
-        handles: {}
-        placeholder_keys: {}
-        result: {}
-        schema:
-          description: ''
-          properties:
-            feedback: {}
-            goal:
-              properties:
-                delay_time:
-                  type: string
-                liquid_material_name:
-                  default: NMP
-                  type: string
-                solutions:
-                  type: string
-                speed:
-                  type: string
-                temperature:
-                  type: string
-              required:
-              - solutions
-              type: object
-            result: {}
-          required:
-          - goal
-          title: batch_create_diamine_solution_tasks参数
-          type: object
-        type: UniLabJsonCommand
-      auto-brief_step_parameters:
-        feedback: {}
-        goal: {}
-        goal_default:
-          data: null
-        handles: {}
-        placeholder_keys: {}
-        result: {}
-        schema:
-          description: ''
-          properties:
-            feedback: {}
-            goal:
-              properties:
-                data:
-                  type: object
-              required:
-              - data
-              type: object
-            result: {}
-          required:
-          - goal
-          title: brief_step_parameters参数
-          type: object
-        type: UniLabJsonCommand
-      auto-compute_experiment_design:
-        feedback: {}
-        goal: {}
-        goal_default:
-          m_tot: '70'
-          ratio: null
-          titration_percent: '0.03'
-          wt_percent: '0.25'
-        handles: {}
-        placeholder_keys: {}
-        result: {}
-        schema:
-          description: ''
-          properties:
-            feedback: {}
-            goal:
-              properties:
-                m_tot:
-                  default: '70'
-                  type: string
-                ratio:
-                  type: object
-                titration_percent:
-                  default: '0.03'
-                  type: string
-                wt_percent:
-                  default: '0.25'
-                  type: string
-              required:
-              - ratio
-              type: object
-            result:
-              properties:
-                feeding_order:
-                  items: {}
-                  title: Feeding Order
-                  type: array
-                return_info:
-                  title: Return Info
-                  type: string
-                solutions:
-                  items: {}
-                  title: Solutions
-                  type: array
-                solvents:
-                  additionalProperties: true
-                  title: Solvents
-                  type: object
-                titration:
-                  additionalProperties: true
-                  title: Titration
-                  type: object
-              required:
-              - solutions
-              - titration
-              - solvents
-              - feeding_order
-              - return_info
-              title: ComputeExperimentDesignReturn
-              type: object
-          required:
-          - goal
-          title: compute_experiment_design参数
-          type: object
-        type: UniLabJsonCommand
-      auto-process_order_finish_report:
-        feedback: {}
-        goal: {}
-        goal_default:
-          report_request: null
-          used_materials: null
-        handles: {}
-        placeholder_keys: {}
-        result: {}
-        schema:
-          description: ''
-          properties:
-            feedback: {}
-            goal:
-              properties:
-                report_request:
-                  type: string
-                used_materials:
-                  type: string
-              required:
-              - report_request
-              - used_materials
-              type: object
-            result: {}
-          required:
-          - goal
-          title: process_order_finish_report参数
-          type: object
-        type: UniLabJsonCommand
-      auto-project_order_report:
-        feedback: {}
-        goal: {}
-        goal_default:
-          order_id: null
-        handles: {}
-        placeholder_keys: {}
-        result: {}
-        schema:
-          description: ''
-          properties:
-            feedback: {}
-            goal:
-              properties:
-                order_id:
-                  type: string
-              required:
-              - order_id
-              type: object
-            result: {}
-          required:
-          - goal
-          title: project_order_report参数
-          type: object
-        type: UniLabJsonCommand
-      auto-query_resource_by_name:
-        feedback: {}
-        goal: {}
-        goal_default:
-          material_name: null
-        handles: {}
-        placeholder_keys: {}
-        result: {}
-        schema:
-          description: ''
-          properties:
-            feedback: {}
-            goal:
-              properties:
-                material_name:
-                  type: string
-              required:
-              - material_name
-              type: object
-            result: {}
-          required:
-          - goal
-          title: query_resource_by_name参数
-          type: object
-        type: UniLabJsonCommand
-      auto-transfer_materials_to_reaction_station:
-        feedback: {}
-        goal: {}
-        goal_default:
-          target_device_id: null
-          transfer_groups: null
-        handles: {}
-        placeholder_keys: {}
-        result: {}
-        schema:
-          description: ''
-          properties:
-            feedback: {}
-            goal:
-              properties:
-                target_device_id:
-                  type: string
-                transfer_groups:
-                  type: array
-              required:
-              - target_device_id
-              - transfer_groups
-              type: object
-            result: {}
-          required:
-          - goal
-          title: transfer_materials_to_reaction_station参数
-          type: object
-        type: UniLabJsonCommand
-      auto-wait_for_multiple_orders_and_get_reports:
-        feedback: {}
-        goal: {}
-        goal_default:
-          batch_create_result: null
-          check_interval: 10
-          timeout: 7200
-        handles: {}
-        placeholder_keys: {}
-        result: {}
-        schema:
-          description: ''
-          properties:
-            feedback: {}
-            goal:
-              properties:
-                batch_create_result:
-                  type: string
-                check_interval:
-                  default: 10
-                  type: integer
-                timeout:
-                  default: 7200
-                  type: integer
-              required: []
-              type: object
-            result: {}
-          required:
-          - goal
-          title: wait_for_multiple_orders_and_get_reports参数
-          type: object
-        type: UniLabJsonCommand
-      auto-workflow_sample_locations:
-        feedback: {}
-        goal: {}
-        goal_default:
-          workflow_id: null
-        handles: {}
-        placeholder_keys: {}
-        result: {}
-        schema:
-          description: ''
-          properties:
-            feedback: {}
-            goal:
-              properties:
-                workflow_id:
-                  type: string
-              required:
-              - workflow_id
-              type: object
-            result: {}
-          required:
-          - goal
-          title: workflow_sample_locations参数
-          type: object
-        type: UniLabJsonCommand
-      create_90_10_vial_feeding_task:
-        feedback: {}
-        goal:
-          delay_time: delay_time
-          hold_m_name: hold_m_name
-          order_name: order_name
-          percent_10_1_assign_material_name: percent_10_1_assign_material_name
-          percent_10_1_liquid_material_name: percent_10_1_liquid_material_name
-          percent_10_1_target_weigh: percent_10_1_target_weigh
-          percent_10_1_volume: percent_10_1_volume
-          percent_10_2_assign_material_name: percent_10_2_assign_material_name
-          percent_10_2_liquid_material_name: percent_10_2_liquid_material_name
-          percent_10_2_target_weigh: percent_10_2_target_weigh
-          percent_10_2_volume: percent_10_2_volume
-          percent_10_3_assign_material_name: percent_10_3_assign_material_name
-          percent_10_3_liquid_material_name: percent_10_3_liquid_material_name
-          percent_10_3_target_weigh: percent_10_3_target_weigh
-          percent_10_3_volume: percent_10_3_volume
-          percent_90_1_assign_material_name: percent_90_1_assign_material_name
-          percent_90_1_target_weigh: percent_90_1_target_weigh
-          percent_90_2_assign_material_name: percent_90_2_assign_material_name
-          percent_90_2_target_weigh: percent_90_2_target_weigh
-          percent_90_3_assign_material_name: percent_90_3_assign_material_name
-          percent_90_3_target_weigh: percent_90_3_target_weigh
-          speed: speed
-          temperature: temperature
-        goal_default:
-          delay_time: ''
-          hold_m_name: ''
-          order_name: ''
-          percent_10_1_assign_material_name: ''
-          percent_10_1_liquid_material_name: ''
-          percent_10_1_target_weigh: ''
-          percent_10_1_volume: ''
-          percent_10_2_assign_material_name: ''
-          percent_10_2_liquid_material_name: ''
-          percent_10_2_target_weigh: ''
-          percent_10_2_volume: ''
-          percent_10_3_assign_material_name: ''
-          percent_10_3_liquid_material_name: ''
-          percent_10_3_target_weigh: ''
-          percent_10_3_volume: ''
-          percent_90_1_assign_material_name: ''
-          percent_90_1_target_weigh: ''
-          percent_90_2_assign_material_name: ''
-          percent_90_2_target_weigh: ''
-          percent_90_3_assign_material_name: ''
-          percent_90_3_target_weigh: ''
-          speed: ''
-          temperature: ''
-        handles: {}
-        result:
-          return_info: return_info
-        schema:
-          description: ''
-          properties:
-            feedback:
-              properties: {}
-              required: []
-              title: DispenStationVialFeed_Feedback
-              type: object
-            goal:
-              properties:
-                delay_time:
-                  type: string
-                hold_m_name:
-                  type: string
-                order_name:
-                  type: string
-                percent_10_1_assign_material_name:
-                  type: string
-                percent_10_1_liquid_material_name:
-                  type: string
-                percent_10_1_target_weigh:
-                  type: string
-                percent_10_1_volume:
-                  type: string
-                percent_10_2_assign_material_name:
-                  type: string
-                percent_10_2_liquid_material_name:
-                  type: string
-                percent_10_2_target_weigh:
-                  type: string
-                percent_10_2_volume:
-                  type: string
-                percent_10_3_assign_material_name:
-                  type: string
-                percent_10_3_liquid_material_name:
-                  type: string
-                percent_10_3_target_weigh:
-                  type: string
-                percent_10_3_volume:
-                  type: string
-                percent_90_1_assign_material_name:
-                  type: string
-                percent_90_1_target_weigh:
-                  type: string
-                percent_90_2_assign_material_name:
-                  type: string
-                percent_90_2_target_weigh:
-                  type: string
-                percent_90_3_assign_material_name:
-                  type: string
-                percent_90_3_target_weigh:
-                  type: string
-                speed:
-                  type: string
-                temperature:
-                  type: string
-              required:
-              - order_name
-              - percent_90_1_assign_material_name
-              - percent_90_1_target_weigh
-              - percent_90_2_assign_material_name
-              - percent_90_2_target_weigh
-              - percent_90_3_assign_material_name
-              - percent_90_3_target_weigh
-              - percent_10_1_assign_material_name
-              - percent_10_1_target_weigh
-              - percent_10_1_volume
-              - percent_10_1_liquid_material_name
-              - percent_10_2_assign_material_name
-              - percent_10_2_target_weigh
-              - percent_10_2_volume
-              - percent_10_2_liquid_material_name
-              - percent_10_3_assign_material_name
-              - percent_10_3_target_weigh
-              - percent_10_3_volume
-              - percent_10_3_liquid_material_name
-              - speed
-              - temperature
-              - delay_time
-              - hold_m_name
-              title: DispenStationVialFeed_Goal
-              type: object
-            result:
-              properties:
-                return_info:
-                  type: string
-              required:
-              - return_info
-              title: DispenStationVialFeed_Result
-              type: object
-          required:
-          - goal
-          title: DispenStationVialFeed
-          type: object
-        type: DispenStationVialFeed
-      create_diamine_solution_task:
-        feedback: {}
-        goal:
-          delay_time: delay_time
-          hold_m_name: hold_m_name
-          liquid_material_name: liquid_material_name
-          material_name: material_name
-          order_name: order_name
-          speed: speed
-          target_weigh: target_weigh
-          temperature: temperature
-          volume: volume
-        goal_default:
-          delay_time: ''
-          hold_m_name: ''
-          liquid_material_name: ''
-          material_name: ''
-          order_name: ''
-          speed: ''
-          target_weigh: ''
-          temperature: ''
-          volume: ''
-        handles: {}
-        result:
-          return_info: return_info
-        schema:
-          description: ''
-          properties:
-            feedback:
-              properties: {}
-              required: []
-              title: DispenStationSolnPrep_Feedback
-              type: object
-            goal:
-              properties:
-                delay_time:
-                  type: string
-                hold_m_name:
-                  type: string
-                liquid_material_name:
-                  type: string
-                material_name:
-                  type: string
-                order_name:
-                  type: string
-                speed:
-                  type: string
-                target_weigh:
-                  type: string
-                temperature:
-                  type: string
-                volume:
-                  type: string
-              required:
-              - order_name
-              - material_name
-              - target_weigh
-              - volume
-              - liquid_material_name
-              - speed
-              - temperature
-              - delay_time
-              - hold_m_name
-              title: DispenStationSolnPrep_Goal
-              type: object
-            result:
-              properties:
-                return_info:
-                  type: string
-              required:
-              - return_info
-              title: DispenStationSolnPrep_Result
-              type: object
-          required:
-          - goal
-          title: DispenStationSolnPrep
-          type: object
-        type: DispenStationSolnPrep
-    module: unilabos.devices.workstation.bioyond_studio.dispensing_station:BioyondDispensingStation
-    status_types: {}
-    type: python
-  config_info: []
-  description: ''
-  handles: []
-  icon: ''
-  init_param_schema:
-    config:
-      properties:
-        config:
-          type: string
-        deck:
-          type: string
-      required:
-      - config
-      - deck
-      type: object
-    data:
-      properties: {}
-      required: []
-      type: object
-  version: 1.0.0

unilabos/registry/devices/bioyond_dispensing_station.yaml

@@ -24,39 +24,321 @@ bioyond_dispensing_station:
               required:
               - data
               type: object
-            result: {}
+            result:
+              type: object
           required:
           - goal
           title: brief_step_parameters参数
           type: object
         type: UniLabJsonCommand
-      auto-compute_experiment_design:
+      auto-process_order_finish_report:
         feedback: {}
         goal: {}
         goal_default:
-          m_tot: '70'
+          report_request: null
-          ratio: null
+          used_materials: null
-          titration_percent: '0.03'
-          wt_percent: '0.25'
         handles: {}
         placeholder_keys: {}
         result: {}
         schema:
           description: ''
+          properties:
+            feedback: {}
+            goal:
+              properties:
+                report_request:
+                  type: string
+                used_materials:
+                  type: string
+              required:
+              - report_request
+              - used_materials
+              type: object
+            result:
+              type: object
+          required:
+          - goal
+          title: process_order_finish_report参数
+          type: object
+        type: UniLabJsonCommand
+      auto-project_order_report:
+        feedback: {}
+        goal: {}
+        goal_default:
+          order_id: null
+        handles: {}
+        placeholder_keys: {}
+        result: {}
+        schema:
+          description: ''
+          properties:
+            feedback: {}
+            goal:
+              properties:
+                order_id:
+                  type: string
+              required:
+              - order_id
+              type: object
+            result:
+              type: object
+          required:
+          - goal
+          title: project_order_report参数
+          type: object
+        type: UniLabJsonCommand
+      auto-query_resource_by_name:
+        feedback: {}
+        goal: {}
+        goal_default:
+          material_name: null
+        handles: {}
+        placeholder_keys: {}
+        result: {}
+        schema:
+          description: ''
+          properties:
+            feedback: {}
+            goal:
+              properties:
+                material_name:
+                  type: string
+              required:
+              - material_name
+              type: object
+            result: {}
+          required:
+          - goal
+          title: query_resource_by_name参数
+          type: object
+        type: UniLabJsonCommand
+      auto-workflow_sample_locations:
+        feedback: {}
+        goal: {}
+        goal_default:
+          workflow_id: null
+        handles: {}
+        placeholder_keys: {}
+        result: {}
+        schema:
+          description: ''
+          properties:
+            feedback: {}
+            goal:
+              properties:
+                workflow_id:
+                  type: string
+              required:
+              - workflow_id
+              type: object
+            result:
+              type: object
+          required:
+          - goal
+          title: workflow_sample_locations参数
+          type: object
+        type: UniLabJsonCommand
+      batch_create_90_10_vial_feeding_tasks:
+        feedback: {}
+        goal:
+          delay_time: delay_time
+          hold_m_name: hold_m_name
+          liquid_material_name: liquid_material_name
+          speed: speed
+          temperature: temperature
+          titration: titration
+        goal_default:
+          delay_time: null
+          hold_m_name: null
+          liquid_material_name: NMP
+          speed: null
+          temperature: null
+          titration: null
+        handles:
+          input:
+          - data_key: titration
+            data_source: handle
+            data_type: object
+            handler_key: titration
+            io_type: source
+            label: Titration Data From Calculation Node
+          output:
+          - data_key: return_info
+            data_source: executor
+            data_type: string
+            handler_key: BATCH_CREATE_RESULT
+            io_type: sink
+            label: Complete Batch Create Result JSON (contains order_codes and order_ids)
+        placeholder_keys: {}
+        result: {}
+        schema:
+          description: 批量创建90%10%小瓶投料任务。从计算节点接收titration数据,包含物料名称、主称固体质量、滴定固体质量和滴定溶剂体积。返回的return_info中包含order_codes和order_ids列表。
+          properties:
+            feedback:
+              title: BatchCreate9010VialFeedingTasks_Feedback
+            goal:
+              properties:
+                delay_time:
+                  description: 延迟时间(秒),默认600
+                  type: string
+                hold_m_name:
+                  description: 库位名称,如"C01",必填参数
+                  type: string
+                liquid_material_name:
+                  default: NMP
+                  description: 10%物料的液体物料名称,默认为"NMP"
+                  type: string
+                speed:
+                  description: 搅拌速度,默认400
+                  type: string
+                temperature:
+                  description: 温度(℃),默认40
+                  type: string
+                titration:
+                  description: '滴定信息对象,包含: name(物料名称), main_portion(主称固体质量g), titration_portion(滴定固体质量g),
+                    titration_solvent(滴定溶液体积mL)'
+                  type: string
+              required:
+              - titration
+              title: BatchCreate9010VialFeedingTasks_Goal
+              type: object
+            result:
+              title: BatchCreate9010VialFeedingTasks_Result
+              type: string
+          required:
+          - goal
+          title: batch_create_90_10_vial_feeding_tasks参数
+          type: object
+        type: UniLabJsonCommand
+      batch_create_diamine_solution_tasks:
+        feedback: {}
+        goal:
+          delay_time: delay_time
+          liquid_material_name: liquid_material_name
+          solutions: solutions
+          speed: speed
+          temperature: temperature
+        goal_default:
+          delay_time: null
+          liquid_material_name: NMP
+          solutions: null
+          speed: null
+          temperature: null
+        handles:
+          input:
+          - data_key: solutions
+            data_source: handle
+            data_type: array
+            handler_key: solutions
+            io_type: source
+            label: Solution Data From Python
+          output:
+          - data_key: return_info
+            data_source: executor
+            data_type: string
+            handler_key: BATCH_CREATE_RESULT
+            io_type: sink
+            label: Complete Batch Create Result JSON (contains order_codes and order_ids)
+        placeholder_keys: {}
+        result: {}
+        schema:
+          description: 批量创建二胺溶液配置任务。自动为多个二胺样品创建溶液配置任务，每个任务包含固体物料称量、溶剂添加、搅拌混合等步骤。返回的return_info中包含order_codes和order_ids列表。
+          properties:
+            feedback:
+              title: BatchCreateDiamineSolutionTasks_Feedback
+            goal:
+              properties:
+                delay_time:
+                  description: 溶液配置完成后的延迟时间（秒），用于充分混合和溶解，默认600秒
+                  type: string
+                liquid_material_name:
+                  default: NMP
+                  description: 液体溶剂名称，用于溶解固体物料，默认为NMP（N-甲基吡咯烷酮）
+                  type: string
+                solutions:
+                  description: '溶液列表，JSON数组格式，每个元素包含: name(物料名称), order(序号), solid_mass(固体质量g),
+                    solvent_volume(溶剂体积mL)。示例: [{"name": "MDA", "order": 0, "solid_mass":
+                    5.0, "solvent_volume": 20}, {"name": "MPDA", "order": 1, "solid_mass":
+                    4.5, "solvent_volume": 18}]'
+                  type: string
+                speed:
+                  description: 搅拌速度（rpm），用于混合溶液，默认400转/分钟
+                  type: string
+                temperature:
+                  description: 配置温度（℃），溶液配置过程的目标温度，默认20℃（室温）
+                  type: string
+              required:
+              - solutions
+              title: BatchCreateDiamineSolutionTasks_Goal
+              type: object
+            result:
+              title: BatchCreateDiamineSolutionTasks_Result
+              type: string
+          required:
+          - goal
+          title: batch_create_diamine_solution_tasks参数
+          type: object
+        type: UniLabJsonCommand
+      compute_experiment_design:
+        feedback: {}
+        goal:
+          m_tot: m_tot
+          ratio: ratio
+          titration_percent: titration_percent
+          wt_percent: wt_percent
+        goal_default:
+          m_tot: '70'
+          ratio: null
+          titration_percent: '0.03'
+          wt_percent: '0.25'
+        handles:
+          output:
+          - data_key: solutions
+            data_source: executor
+            data_type: array
+            handler_key: solutions
+            io_type: sink
+            label: Solution Data From Python
+          - data_key: titration
+            data_source: executor
+            data_type: object
+            handler_key: titration
+            io_type: sink
+            label: Titration Data From Calculation Node
+          - data_key: solvents
+            data_source: executor
+            data_type: object
+            handler_key: solvents
+            io_type: sink
+            label: Solvents Data From Calculation Node
+          - data_key: feeding_order
+            data_source: executor
+            data_type: array
+            handler_key: feeding_order
+            io_type: sink
+            label: Feeding Order Data From Calculation Node
+        placeholder_keys: {}
+        result: {}
+        schema:
+          description: 计算实验设计，输出solutions/titration/solvents/feeding_order用于后续节点。
           properties:
             feedback: {}
             goal:
               properties:
                 m_tot:
                   default: '70'
+                  description: 总质量(g)
                   type: string
                 ratio:
+                  description: 组分摩尔比的对象，保持输入顺序，如{"MDA":1,"BTDA":1}
                   type: object
                 titration_percent:
                   default: '0.03'
+                  description: 滴定比例(10%部分)
                   type: string
                 wt_percent:
                   default: '0.25'
+                  description: 目标固含质量分数
                   type: string
               required:
               - ratio
@@ -95,305 +377,6 @@ bioyond_dispensing_station:
           title: compute_experiment_design参数
           type: object
         type: UniLabJsonCommand
-      auto-process_order_finish_report:
-        feedback: {}
-        goal: {}
-        goal_default:
-          report_request: null
-          used_materials: null
-        handles: {}
-        placeholder_keys: {}
-        result: {}
-        schema:
-          description: ''
-          properties:
-            feedback: {}
-            goal:
-              properties:
-                report_request:
-                  type: string
-                used_materials:
-                  type: string
-              required:
-              - report_request
-              - used_materials
-              type: object
-            result: {}
-          required:
-          - goal
-          title: process_order_finish_report参数
-          type: object
-        type: UniLabJsonCommand
-      auto-project_order_report:
-        feedback: {}
-        goal: {}
-        goal_default:
-          order_id: null
-        handles: {}
-        placeholder_keys: {}
-        result: {}
-        schema:
-          description: ''
-          properties:
-            feedback: {}
-            goal:
-              properties:
-                order_id:
-                  type: string
-              required:
-              - order_id
-              type: object
-            result: {}
-          required:
-          - goal
-          title: project_order_report参数
-          type: object
-        type: UniLabJsonCommand
-      auto-query_resource_by_name:
-        feedback: {}
-        goal: {}
-        goal_default:
-          material_name: null
-        handles: {}
-        placeholder_keys: {}
-        result: {}
-        schema:
-          description: ''
-          properties:
-            feedback: {}
-            goal:
-              properties:
-                material_name:
-                  type: string
-              required:
-              - material_name
-              type: object
-            result: {}
-          required:
-          - goal
-          title: query_resource_by_name参数
-          type: object
-        type: UniLabJsonCommand
-      auto-transfer_materials_to_reaction_station:
-        feedback: {}
-        goal: {}
-        goal_default:
-          target_device_id: null
-          transfer_groups: null
-        handles: {}
-        placeholder_keys: {}
-        result: {}
-        schema:
-          description: ''
-          properties:
-            feedback: {}
-            goal:
-              properties:
-                target_device_id:
-                  type: string
-                transfer_groups:
-                  type: array
-              required:
-              - target_device_id
-              - transfer_groups
-              type: object
-            result: {}
-          required:
-          - goal
-          title: transfer_materials_to_reaction_station参数
-          type: object
-        type: UniLabJsonCommand
-      auto-workflow_sample_locations:
-        feedback: {}
-        goal: {}
-        goal_default:
-          workflow_id: null
-        handles: {}
-        placeholder_keys: {}
-        result: {}
-        schema:
-          description: ''
-          properties:
-            feedback: {}
-            goal:
-              properties:
-                workflow_id:
-                  type: string
-              required:
-              - workflow_id
-              type: object
-            result: {}
-          required:
-          - goal
-          title: workflow_sample_locations参数
-          type: object
-        type: UniLabJsonCommand
-      batch_create_90_10_vial_feeding_tasks:
-        feedback: {}
-        goal:
-          delay_time: delay_time
-          hold_m_name: hold_m_name
-          liquid_material_name: liquid_material_name
-          speed: speed
-          temperature: temperature
-          titration: titration
-        goal_default:
-          delay_time: '600'
-          hold_m_name: ''
-          liquid_material_name: NMP
-          speed: '400'
-          temperature: '40'
-          titration: ''
-        handles:
-          input:
-          - data_key: titration
-            data_source: handle
-            data_type: object
-            handler_key: titration
-            io_type: source
-            label: Titration Data From Calculation Node
-          output:
-          - data_key: return_info
-            data_source: executor
-            data_type: string
-            handler_key: BATCH_CREATE_RESULT
-            io_type: sink
-            label: Complete Batch Create Result JSON (contains order_codes and order_ids)
-        result:
-          return_info: return_info
-        schema:
-          description: 批量创建90%10%小瓶投料任务。从计算节点接收titration数据,包含物料名称、主称固体质量、滴定固体质量和滴定溶剂体积。返回的return_info中包含order_codes和order_ids列表。
-          properties:
-            feedback:
-              properties: {}
-              required: []
-              title: BatchCreate9010VialFeedingTasks_Feedback
-              type: object
-            goal:
-              properties:
-                delay_time:
-                  default: '600'
-                  description: 延迟时间(秒),默认600
-                  type: string
-                hold_m_name:
-                  description: 库位名称,如"C01",必填参数
-                  type: string
-                liquid_material_name:
-                  default: NMP
-                  description: 10%物料的液体物料名称,默认为"NMP"
-                  type: string
-                speed:
-                  default: '400'
-                  description: 搅拌速度,默认400
-                  type: string
-                temperature:
-                  default: '40'
-                  description: 温度(℃),默认40
-                  type: string
-                titration:
-                  description: '滴定信息对象,包含: name(物料名称), main_portion(主称固体质量g), titration_portion(滴定固体质量g),
-                    titration_solvent(滴定溶液体积mL)'
-                  type: string
-              required:
-              - titration
-              - hold_m_name
-              title: BatchCreate9010VialFeedingTasks_Goal
-              type: object
-            result:
-              properties:
-                return_info:
-                  description: 批量任务创建结果汇总JSON字符串，包含total(总数)、success(成功数)、failed(失败数)、order_codes(任务编码数组)、order_ids(任务ID数组)、details(每个任务的详细信息)
-                  type: string
-              required:
-              - return_info
-              title: BatchCreate9010VialFeedingTasks_Result
-              type: object
-          required:
-          - goal
-          title: BatchCreate9010VialFeedingTasks
-          type: object
-        type: UniLabJsonCommand
-      batch_create_diamine_solution_tasks:
-        feedback: {}
-        goal:
-          delay_time: delay_time
-          liquid_material_name: liquid_material_name
-          solutions: solutions
-          speed: speed
-          temperature: temperature
-        goal_default:
-          delay_time: '600'
-          liquid_material_name: NMP
-          solutions: ''
-          speed: '400'
-          temperature: '20'
-        handles:
-          input:
-          - data_key: solutions
-            data_source: handle
-            data_type: array
-            handler_key: solutions
-            io_type: source
-            label: Solution Data From Python
-          output:
-          - data_key: return_info
-            data_source: executor
-            data_type: string
-            handler_key: BATCH_CREATE_RESULT
-            io_type: sink
-            label: Complete Batch Create Result JSON (contains order_codes and order_ids)
-        result:
-          return_info: return_info
-        schema:
-          description: 批量创建二胺溶液配置任务。自动为多个二胺样品创建溶液配置任务，每个任务包含固体物料称量、溶剂添加、搅拌混合等步骤。返回的return_info中包含order_codes和order_ids列表。
-          properties:
-            feedback:
-              properties: {}
-              required: []
-              title: BatchCreateDiamineSolutionTasks_Feedback
-              type: object
-            goal:
-              properties:
-                delay_time:
-                  default: '600'
-                  description: 溶液配置完成后的延迟时间（秒），用于充分混合和溶解，默认600秒
-                  type: string
-                liquid_material_name:
-                  default: NMP
-                  description: 液体溶剂名称，用于溶解固体物料，默认为NMP（N-甲基吡咯烷酮）
-                  type: string
-                solutions:
-                  description: '溶液列表，JSON数组格式，每个元素包含: name(物料名称), order(序号), solid_mass(固体质量g),
-                    solvent_volume(溶剂体积mL)。示例: [{"name": "MDA", "order": 0, "solid_mass":
-                    5.0, "solvent_volume": 20}, {"name": "MPDA", "order": 1, "solid_mass":
-                    4.5, "solvent_volume": 18}]'
-                  type: string
-                speed:
-                  default: '400'
-                  description: 搅拌速度（rpm），用于混合溶液，默认400转/分钟
-                  type: string
-                temperature:
-                  default: '20'
-                  description: 配置温度（℃），溶液配置过程的目标温度，默认20℃（室温）
-                  type: string
-              required:
-              - solutions
-              title: BatchCreateDiamineSolutionTasks_Goal
-              type: object
-            result:
-              properties:
-                return_info:
-                  description: 批量任务创建结果汇总JSON字符串，包含total(总数)、success(成功数)、failed(失败数)、order_codes(任务编码数组)、order_ids(任务ID数组)、details(每个任务的详细信息)
-                  type: string
-              required:
-              - return_info
-              title: BatchCreateDiamineSolutionTasks_Result
-              type: object
-          required:
-          - goal
-          title: BatchCreateDiamineSolutionTasks
-          type: object
-        type: UniLabJsonCommand
       create_90_10_vial_feeding_task:
         feedback: {}
         goal:
@@ -445,17 +428,18 @@ bioyond_dispensing_station:
           speed: ''
           temperature: ''
         handles: {}
+        placeholder_keys: {}
         result:
           return_info: return_info
         schema:
           description: ''
           properties:
             feedback:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: DispenStationVialFeed_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 delay_time:
                   type: string
@@ -503,38 +487,13 @@ bioyond_dispensing_station:
                   type: string
                 temperature:
                   type: string
-              required:
-              - order_name
-              - percent_90_1_assign_material_name
-              - percent_90_1_target_weigh
-              - percent_90_2_assign_material_name
-              - percent_90_2_target_weigh
-              - percent_90_3_assign_material_name
-              - percent_90_3_target_weigh
-              - percent_10_1_assign_material_name
-              - percent_10_1_target_weigh
-              - percent_10_1_volume
-              - percent_10_1_liquid_material_name
-              - percent_10_2_assign_material_name
-              - percent_10_2_target_weigh
-              - percent_10_2_volume
-              - percent_10_2_liquid_material_name
-              - percent_10_3_assign_material_name
-              - percent_10_3_target_weigh
-              - percent_10_3_volume
-              - percent_10_3_liquid_material_name
-              - speed
-              - temperature
-              - delay_time
-              - hold_m_name
               title: DispenStationVialFeed_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
-              required:
-              - return_info
               title: DispenStationVialFeed_Result
               type: object
           required:
@@ -565,17 +524,18 @@ bioyond_dispensing_station:
           temperature: ''
           volume: ''
         handles: {}
+        placeholder_keys: {}
         result:
           return_info: return_info
         schema:
           description: ''
           properties:
             feedback:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: DispenStationSolnPrep_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 delay_time:
                   type: string
@@ -595,24 +555,13 @@ bioyond_dispensing_station:
                   type: string
                 volume:
                   type: string
-              required:
-              - order_name
-              - material_name
-              - target_weigh
-              - volume
-              - liquid_material_name
-              - speed
-              - temperature
-              - delay_time
-              - hold_m_name
               title: DispenStationSolnPrep_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
-              required:
-              - return_info
               title: DispenStationSolnPrep_Result
               type: object
           required:
@@ -620,6 +569,64 @@ bioyond_dispensing_station:
           title: DispenStationSolnPrep
           type: object
         type: DispenStationSolnPrep
+      scheduler_start:
+        feedback: {}
+        goal: {}
+        goal_default: {}
+        handles: {}
+        placeholder_keys: {}
+        result: {}
+        schema:
+          description: 启动调度器 - 启动Bioyond配液站的任务调度器，开始执行队列中的任务
+          properties:
+            feedback: {}
+            goal:
+              properties: {}
+              required: []
+              type: object
+            result:
+              title: scheduler_start结果
+              type: object
+          required:
+          - goal
+          title: scheduler_start参数
+          type: object
+        type: UniLabJsonCommand
+      transfer_materials_to_reaction_station:
+        feedback: {}
+        goal:
+          target_device_id: target_device_id
+          transfer_groups: transfer_groups
+        goal_default:
+          target_device_id: null
+          transfer_groups: null
+        handles: {}
+        placeholder_keys:
+          target_device_id: unilabos_devices
+        result: {}
+        schema:
+          description: 将配液站完成的物料（溶液、样品等）转移到指定反应站的堆栈库位。支持配置多组转移任务，每组包含物料名称、目标堆栈和目标库位。
+          properties:
+            feedback: {}
+            goal:
+              properties:
+                target_device_id:
+                  description: 目标反应站设备ID（从设备列表中选择，所有转移组都使用同一个目标设备）
+                  type: string
+                transfer_groups:
+                  description: 转移任务组列表，每组包含物料名称、目标堆栈和目标库位，可以添加多组
+                  type: array
+              required:
+              - target_device_id
+              - transfer_groups
+              type: object
+            result:
+              type: object
+          required:
+          - goal
+          title: transfer_materials_to_reaction_station参数
+          type: object
+        type: UniLabJsonCommand
       wait_for_multiple_orders_and_get_reports:
         feedback: {}
         goal:
@@ -627,9 +634,9 @@ bioyond_dispensing_station:
           check_interval: check_interval
           timeout: timeout
         goal_default:
-          batch_create_result: ''
+          batch_create_result: null
-          check_interval: '10'
+          check_interval: 10
-          timeout: '7200'
+          timeout: 7200
         handles:
           input:
           - data_key: batch_create_result
@@ -645,50 +652,38 @@ bioyond_dispensing_station:
             handler_key: batch_reports_result
             io_type: sink
             label: Batch Order Completion Reports
-        result:
+        placeholder_keys: {}
-          return_info: return_info
+        result: {}
         schema:
           description: 同时等待多个任务完成并获取所有实验报告。从上游batch_create任务接收包含order_codes和order_ids的结果对象，并行监控所有任务状态并返回每个任务的报告。
           properties:
             feedback:
-              properties: {}
-              required: []
               title: WaitForMultipleOrdersAndGetReports_Feedback
-              type: object
             goal:
               properties:
                 batch_create_result:
                   description: 批量创建任务的返回结果对象，包含order_codes和order_ids数组。从上游batch_create节点通过handle传递
                   type: string
                 check_interval:
-                  default: '10'
+                  default: 10
                   description: 检查任务状态的时间间隔（秒），默认每10秒检查一次所有待完成任务
-                  type: string
+                  type: integer
                 timeout:
-                  default: '7200'
+                  default: 7200
                   description: 等待超时时间（秒），默认7200秒（2小时）。超过此时间未完成的任务将标记为timeout
-                  type: string
+                  type: integer
-              required:
+              required: []
-              - batch_create_result
               title: WaitForMultipleOrdersAndGetReports_Goal
               type: object
             result:
-              properties:
-                return_info:
-                  description: 'JSON格式的批量任务完成信息，包含: total(总数), completed(成功数), timeout(超时数),
-                    error(错误数), elapsed_time(总耗时), reports(报告数组，每个元素包含order_code,
-                    order_id, status, completion_status, report, elapsed_time)'
-                  type: string
-              required:
-              - return_info
               title: WaitForMultipleOrdersAndGetReports_Result
               type: object
           required:
           - goal
-          title: WaitForMultipleOrdersAndGetReports
+          title: wait_for_multiple_orders_and_get_reports参数
           type: object
         type: UniLabJsonCommand
-    module: unilabos.devices.workstation.bioyond_studio.dispensing_station:BioyondDispensingStation
+    module: unilabos.devices.workstation.bioyond_studio.dispensing_station.dispensing_station:BioyondDispensingStation
     status_types: {}
     type: python
   config_info: []
@@ -699,15 +694,16 @@ bioyond_dispensing_station:
     config:
       properties:
         config:
-          type: string
+          type: object
         deck:
           type: string
-      required:
+        protocol_type:
-      - config
+          type: string
-      - deck
+      required: []
       type: object
     data:
       properties: {}
       required: []
       type: object
+  model: {}
   version: 1.0.0

unilabos/registry/devices/camera.yaml

@@ -1,78 +0,0 @@
-camera:
-  category:
-  - camera
-  class:
-    action_value_mappings:
-      auto-destroy_node:
-        feedback: {}
-        goal: {}
-        goal_default: {}
-        handles: {}
-        placeholder_keys: {}
-        result: {}
-        schema:
-          description: 用于安全地关闭摄像头设备，释放摄像头资源，停止视频采集和发布服务。调用此函数将清理OpenCV摄像头连接并销毁ROS2节点。
-          properties:
-            feedback: {}
-            goal:
-              properties: {}
-              required: []
-              type: object
-            result: {}
-          required:
-          - goal
-          title: destroy_node参数
-          type: object
-        type: UniLabJsonCommand
-      auto-timer_callback:
-        feedback: {}
-        goal: {}
-        goal_default: {}
-        handles: {}
-        placeholder_keys: {}
-        result: {}
-        schema:
-          description: 定时器回调函数的参数schema。此函数负责定期采集摄像头视频帧，将OpenCV格式的图像转换为ROS Image消息格式，并发布到指定的视频话题。默认以10Hz频率执行，确保视频流的连续性和实时性。
-          properties:
-            feedback: {}
-            goal:
-              properties: {}
-              required: []
-              type: object
-            result: {}
-          required:
-          - goal
-          title: timer_callback参数
-          type: object
-        type: UniLabJsonCommand
-    module: unilabos.ros.nodes.presets.camera:VideoPublisher
-    status_types: {}
-    type: ros2
-  config_info: []
-  description: VideoPublisher摄像头设备节点，用于实时视频采集和流媒体发布。该设备通过OpenCV连接本地摄像头（如USB摄像头、内置摄像头等），定时采集视频帧并将其转换为ROS2的sensor_msgs/Image消息格式发布到视频话题。主要用于实验室自动化系统中的视觉监控、图像分析、实时观察等应用场景。支持可配置的摄像头索引、发布频率等参数。
-  handles: []
-  icon: ''
-  init_param_schema:
-    config:
-      properties:
-        camera_index:
-          default: 0
-          type: string
-        device_id:
-          default: video_publisher
-          type: string
-        device_uuid:
-          default: ''
-          type: string
-        period:
-          default: 0.1
-          type: number
-        resource_tracker:
-          type: object
-      required: []
-      type: object
-    data:
-      properties: {}
-      required: []
-      type: object
-  version: 1.0.0

unilabos/registry/devices/cameraSII.yaml

@@ -18,7 +18,7 @@ cameracontroller_device:
             goal:
               properties:
                 config:
-                  type: string
+                  type: object
               required: []
               type: object
             result: {}
@@ -42,7 +42,8 @@ cameracontroller_device:
               properties: {}
               required: []
               type: object
-            result: {}
+            result:
+              type: object
           required:
           - goal
           title: stop参数
@@ -50,7 +51,7 @@ cameracontroller_device:
         type: UniLabJsonCommand
     module: unilabos.devices.cameraSII.cameraUSB:CameraController
     status_types:
-      status: dict
+      status: Dict[str, Any]
     type: python
   config_info: []
   description: Uni-Lab-OS 摄像头驱动（Linux USB 摄像头版，无 PTZ）
@@ -103,5 +104,4 @@ cameracontroller_device:
       required:
       - status
       type: object
-  registry_type: device
   version: 1.0.0

unilabos/registry/devices/characterization_chromatic.yaml

@@ -141,30 +141,26 @@ hplc.agilent:
           description: ''
           properties:
             feedback:
+              additionalProperties: false
               properties:
                 status:
                   type: string
-              required:
-              - status
               title: SendCmd_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 command:
                   type: string
-              required:
-              - command
               title: SendCmd_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
                 success:
                   type: boolean
-              required:
-              - return_info
-              - success
               title: SendCmd_Result
               type: object
           required:
@@ -175,7 +171,6 @@ hplc.agilent:
     module: unilabos.devices.hplc.AgilentHPLC:HPLCDriver
     status_types:
       could_run: bool
-      data_file: String
       device_status: str
       driver_init_ok: bool
       finish_status: str
@@ -199,10 +194,6 @@ hplc.agilent:
       properties:
         could_run:
           type: boolean
-        data_file:
-          items:
-            type: string
-          type: array
         device_status:
           type: string
         driver_init_ok:
@@ -216,14 +207,13 @@ hplc.agilent:
         success:
           type: boolean
       required:
-      - status_text
-      - device_status
       - could_run
+      - device_status
       - driver_init_ok
-      - is_running
-      - success
       - finish_status
-      - data_file
+      - is_running
+      - status_text
+      - success
       type: object
   version: 1.0.0
 hplc.agilent-zhida:
@@ -236,26 +226,25 @@ hplc.agilent-zhida:
         goal: {}
         goal_default: {}
         handles: {}
-        result: {}
+        placeholder_keys: {}
+        result:
+          return_info: return_info
         schema:
           description: ''
           properties:
             feedback:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: EmptyIn_Feedback
               type: object
             goal:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: EmptyIn_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
-              required:
-              - return_info
               title: EmptyIn_Result
               type: object
           required:
@@ -315,21 +304,18 @@ hplc.agilent-zhida:
           description: ''
           properties:
             feedback:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: EmptyIn_Feedback
               type: object
             goal:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: EmptyIn_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
-              required:
-              - return_info
               title: EmptyIn_Result
               type: object
           required:
@@ -341,35 +327,35 @@ hplc.agilent-zhida:
         feedback: {}
         goal:
           string: string
+          text: text
         goal_default:
           string: ''
         handles: {}
-        result: {}
+        placeholder_keys: {}
+        result:
+          return_info: return_info
+          success: success
         schema:
           description: ''
           properties:
             feedback:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: StrSingleInput_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 string:
                   type: string
-              required:
-              - string
               title: StrSingleInput_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
                 success:
                   type: boolean
-              required:
-              - return_info
-              - success
               title: StrSingleInput_Result
               type: object
           required:
@@ -407,7 +393,7 @@ hplc.agilent-zhida:
         status:
           type: object
       required:
-      - status
       - methods
+      - status
       type: object
   version: 1.0.0

unilabos/registry/devices/characterization_optic.yaml

@@ -120,42 +120,41 @@ raman.home_made:
           type: object
         type: UniLabJsonCommand
       raman_cmd:
-        feedback: {}
+        feedback:
+          status: status
         goal:
           command: command
         goal_default:
           command: ''
         handles: {}
+        placeholder_keys: {}
         result:
+          return_info: return_info
           success: success
         schema:
           description: ''
           properties:
             feedback:
+              additionalProperties: false
               properties:
                 status:
                   type: string
-              required:
-              - status
               title: SendCmd_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 command:
                   type: string
-              required:
-              - command
               title: SendCmd_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
                 success:
                   type: boolean
-              required:
-              - return_info
-              - success
               title: SendCmd_Result
               type: object
           required:

unilabos/registry/devices/chinwe.yaml

@@ -19,7 +19,8 @@ separator.chinwe:
               properties: {}
               required: []
               type: object
-            result: {}
+            result:
+              type: boolean
           required:
           - goal
           title: connect参数
@@ -65,135 +66,145 @@ separator.chinwe:
               required:
               - command_dict
               type: object
-            result: {}
+            result:
+              type: boolean
           required:
           - goal
           title: execute_command_from_outer参数
           type: object
         type: UniLabJsonCommand
       motor_rotate_quarter:
+        feedback: {}
         goal:
           direction: 顺时针
           motor_id: 4
           speed: 60
+        goal_default:
+          direction: 顺时针
+          motor_id: null
+          speed: 60
         handles: {}
+        placeholder_keys: {}
+        result: {}
         schema:
           description: 电机旋转 1/4 圈
           properties:
+            feedback: {}
             goal:
               properties:
                 direction:
                   default: 顺时针
                   description: 旋转方向
-                  enum:
-                  - 顺时针
-                  - 逆时针
                   type: string
                 motor_id:
-                  default: '4'
                   description: 选择电机 (4:搅拌, 5:旋钮)
-                  enum:
+                  type: integer
-                  - '4'
-                  - '5'
-                  type: string
                 speed:
                   default: 60
                   description: 速度 (RPM)
                   type: integer
               required:
               - motor_id
-              - speed
+              type: object
+            result: {}
+          required:
+          - goal
+          title: motor_rotate_quarter参数
           type: object
         type: UniLabJsonCommand
       motor_run_continuous:
+        feedback: {}
         goal:
           direction: 顺时针
           motor_id: 4
           speed: 60
+        goal_default:
+          direction: 顺时针
+          motor_id: null
+          speed: null
         handles: {}
+        placeholder_keys: {}
+        result: {}
         schema:
           description: 电机一直旋转 (速度模式)
           properties:
+            feedback: {}
             goal:
               properties:
                 direction:
                   default: 顺时针
                   description: 旋转方向
-                  enum:
-                  - 顺时针
-                  - 逆时针
                   type: string
                 motor_id:
-                  default: '4'
                   description: 选择电机 (4:搅拌, 5:旋钮)
-                  enum:
+                  type: integer
-                  - '4'
-                  - '5'
-                  type: string
                 speed:
-                  default: 60
                   description: 速度 (RPM)
                   type: integer
               required:
               - motor_id
               - speed
               type: object
+            result: {}
+          required:
+          - goal
+          title: motor_run_continuous参数
+          type: object
         type: UniLabJsonCommand
       motor_stop:
+        feedback: {}
         goal:
           motor_id: 4
+        goal_default:
+          motor_id: null
         handles: {}
+        placeholder_keys: {}
+        result: {}
         schema:
           description: 停止指定步进电机
           properties:
+            feedback: {}
             goal:
               properties:
                 motor_id:
-                  default: '4'
                   description: 选择电机
-                  enum:
-                  - '4'
-                  - '5'
                   title: '注: 4=搅拌, 5=旋钮'
-                  type: string
+                  type: integer
               required:
               - motor_id
               type: object
+            result: {}
+          required:
+          - goal
+          title: motor_stop参数
+          type: object
         type: UniLabJsonCommand
       pump_aspirate:
+        feedback: {}
         goal:
           pump_id: 1
           valve_port: 1
           volume: 1000
+        goal_default:
+          pump_id: null
+          valve_port: null
+          volume: null
         handles: {}
+        placeholder_keys: {}
+        result: {}
         schema:
           description: 注射泵吸液
           properties:
+            feedback: {}
             goal:
               properties:
                 pump_id:
-                  default: '1'
                   description: 选择泵
-                  enum:
+                  type: integer
-                  - '1'
-                  - '2'
-                  - '3'
-                  type: string
                 valve_port:
-                  default: '1'
                   description: 阀门端口
-                  enum:
+                  type: integer
-                  - '1'
-                  - '2'
-                  - '3'
-                  - '4'
-                  - '5'
-                  - '6'
-                  - '7'
-                  - '8'
-                  type: string
                 volume:
-                  default: 1000
                   description: 吸液步数
                   type: integer
               required:
@@ -201,41 +212,38 @@ separator.chinwe:
               - volume
               - valve_port
               type: object
+            result: {}
+          required:
+          - goal
+          title: pump_aspirate参数
+          type: object
         type: UniLabJsonCommand
       pump_dispense:
+        feedback: {}
         goal:
           pump_id: 1
           valve_port: 1
           volume: 1000
+        goal_default:
+          pump_id: null
+          valve_port: null
+          volume: null
         handles: {}
+        placeholder_keys: {}
+        result: {}
         schema:
           description: 注射泵排液
           properties:
+            feedback: {}
             goal:
               properties:
                 pump_id:
-                  default: '1'
                   description: 选择泵
-                  enum:
+                  type: integer
-                  - '1'
-                  - '2'
-                  - '3'
-                  type: string
                 valve_port:
-                  default: '1'
                   description: 阀门端口
-                  enum:
+                  type: integer
-                  - '1'
-                  - '2'
-                  - '3'
-                  - '4'
-                  - '5'
-                  - '6'
-                  - '7'
-                  - '8'
-                  type: string
                 volume:
-                  default: 1000
                   description: 排液步数
                   type: integer
               required:
@@ -243,121 +251,152 @@ separator.chinwe:
               - volume
               - valve_port
               type: object
+            result: {}
+          required:
+          - goal
+          title: pump_dispense参数
+          type: object
         type: UniLabJsonCommand
       pump_initialize:
+        feedback: {}
         goal:
           drain_port: 0
           output_port: 0
           pump_id: 1
           speed: 10
+        goal_default:
+          drain_port: 0
+          output_port: 0
+          pump_id: null
+          speed: 10
         handles: {}
+        placeholder_keys: {}
+        result: {}
         schema:
           description: 初始化指定注射泵
           properties:
+            feedback: {}
             goal:
               properties:
                 drain_port:
                   default: 0
                   description: 排液口索引
-                  type: integer
+                  type: string
                 output_port:
                   default: 0
                   description: 输出口索引
-                  type: integer
-                pump_id:
-                  default: '1'
-                  description: 选择泵
-                  enum:
-                  - '1'
-                  - '2'
-                  - '3'
-                  title: '注: 1号泵, 2号泵, 3号泵'
                   type: string
+                pump_id:
+                  description: 选择泵
+                  title: '注: 1号泵, 2号泵, 3号泵'
+                  type: integer
                 speed:
                   default: 10
                   description: 运动速度
-                  type: integer
+                  type: string
               required:
               - pump_id
               type: object
+            result: {}
+          required:
+          - goal
+          title: pump_initialize参数
+          type: object
         type: UniLabJsonCommand
       pump_valve:
+        feedback: {}
         goal:
           port: 1
           pump_id: 1
+        goal_default:
+          port: null
+          pump_id: null
         handles: {}
+        placeholder_keys: {}
+        result: {}
         schema:
           description: 切换指定泵的阀门端口
           properties:
+            feedback: {}
             goal:
               properties:
                 port:
-                  default: '1'
                   description: 阀门端口号 (1-8)
-                  enum:
+                  type: integer
-                  - '1'
-                  - '2'
-                  - '3'
-                  - '4'
-                  - '5'
-                  - '6'
-                  - '7'
-                  - '8'
-                  type: string
                 pump_id:
-                  default: '1'
                   description: 选择泵
-                  enum:
+                  type: integer
-                  - '1'
-                  - '2'
-                  - '3'
-                  type: string
               required:
               - pump_id
               - port
               type: object
+            result: {}
+          required:
+          - goal
+          title: pump_valve参数
+          type: object
         type: UniLabJsonCommand
       wait_sensor_level:
+        feedback: {}
         goal:
           target_state: 有液
           timeout: 30
+        goal_default:
+          target_state: 有液
+          timeout: 30
         handles: {}
+        placeholder_keys: {}
+        result: {}
         schema:
           description: 等待传感器液位条件
           properties:
+            feedback: {}
             goal:
               properties:
                 target_state:
                   default: 有液
                   description: 目标液位状态
-                  enum:
-                  - 有液
-                  - 无液
                   type: string
                 timeout:
                   default: 30
                   description: 超时时间 (秒)
                   type: integer
+              required: []
+              type: object
+            result:
+              type: boolean
           required:
-              - target_state
+          - goal
+          title: wait_sensor_level参数
           type: object
         type: UniLabJsonCommand
       wait_time:
+        feedback: {}
         goal:
           duration: 10
+        goal_default:
+          duration: null
         handles: {}
+        placeholder_keys: {}
+        result: {}
         schema:
           description: 等待指定时间
           properties:
+            feedback: {}
             goal:
               properties:
                 duration:
-                  default: 10
                   description: 等待时间 (秒)
                   type: integer
               required:
               - duration
               type: object
+            result:
+              type: boolean
+          required:
+          - goal
+          title: wait_time参数
+          type: object
         type: UniLabJsonCommand
     module: unilabos.devices.separator.chinwe:ChinweDevice
     status_types:
@@ -406,8 +445,8 @@ separator.chinwe:
         sensor_rssi:
           type: integer
       required:
+      - is_connected
       - sensor_level
       - sensor_rssi
-      - is_connected
       type: object
   version: 2.1.0

unilabos/registry/devices/coin_cell_workstation.yaml

@@ -0,0 +1,834 @@
+coincellassemblyworkstation_device:
+  category:
+  - coin_cell_workstation
+  class:
+    action_value_mappings:
+      auto-change_hole_sheet_to_2:
+        feedback: {}
+        goal: {}
+        goal_default:
+          hole: null
+        handles: {}
+        placeholder_keys: {}
+        result: {}
+        schema:
+          description: ''
+          properties:
+            feedback: {}
+            goal:
+              properties:
+                hole:
+                  type: object
+              required:
+              - hole
+              type: object
+            result: {}
+          required:
+          - goal
+          title: change_hole_sheet_to_2参数
+          type: object
+        type: UniLabJsonCommandAsync
+      auto-fill_plate:
+        feedback: {}
+        goal: {}
+        goal_default: {}
+        handles: {}
+        placeholder_keys: {}
+        result: {}
+        schema:
+          description: ''
+          properties:
+            feedback: {}
+            goal:
+              properties: {}
+              required: []
+              type: object
+            result: {}
+          required:
+          - goal
+          title: fill_plate参数
+          type: object
+        type: UniLabJsonCommandAsync
+      auto-fun_wuliao_test:
+        feedback: {}
+        goal: {}
+        goal_default: {}
+        handles: {}
+        placeholder_keys: {}
+        result: {}
+        schema:
+          description: ''
+          properties:
+            feedback: {}
+            goal:
+              properties: {}
+              required: []
+              type: object
+            result:
+              type: boolean
+          required:
+          - goal
+          title: fun_wuliao_test参数
+          type: object
+        type: UniLabJsonCommand
+      auto-func_allpack_cmd:
+        feedback: {}
+        goal: {}
+        goal_default:
+          assembly_pressure: 4200
+          assembly_type: 7
+          elec_num: null
+          elec_use_num: null
+          elec_vol: 50
+          file_path: /Users/sml/work
+        handles: {}
+        placeholder_keys: {}
+        result: {}
+        schema:
+          description: ''
+          properties:
+            feedback: {}
+            goal:
+              properties:
+                assembly_pressure:
+                  default: 4200
+                  type: integer
+                assembly_type:
+                  default: 7
+                  type: integer
+                elec_num:
+                  type: string
+                elec_use_num:
+                  type: string
+                elec_vol:
+                  default: 50
+                  type: integer
+                file_path:
+                  default: /Users/sml/work
+                  type: string
+              required:
+              - elec_num
+              - elec_use_num
+              type: object
+            result:
+              type: object
+          required:
+          - goal
+          title: func_allpack_cmd参数
+          type: object
+        type: UniLabJsonCommand
+      auto-func_allpack_cmd_simp:
+        feedback: {}
+        goal: {}
+        goal_default:
+          assembly_pressure: 4200
+          assembly_type: 7
+          battery_clean_ignore: false
+          battery_pressure_mode: true
+          dual_drop_first_volume: 25
+          dual_drop_mode: false
+          dual_drop_start_timing: false
+          dual_drop_suction_timing: false
+          elec_num: null
+          elec_use_num: null
+          elec_vol: 50
+          file_path: /Users/sml/work
+          fujipian_juzhendianwei: 0
+          fujipian_panshu: 0
+          gemo_juzhendianwei: 0
+          gemopanshu: 0
+          lvbodian: true
+          qiangtou_juzhendianwei: 0
+        handles: {}
+        placeholder_keys: {}
+        result: {}
+        schema:
+          description: 简化版电池组装函数，整合了参数设置和双滴模式
+          properties:
+            feedback: {}
+            goal:
+              properties:
+                assembly_pressure:
+                  default: 4200
+                  description: 电池压制力(N)
+                  type: integer
+                assembly_type:
+                  default: 7
+                  description: 组装类型(7=不用铝箔垫, 8=使用铝箔垫)
+                  type: integer
+                battery_clean_ignore:
+                  default: false
+                  description: 是否忽略电池清洁步骤
+                  type: boolean
+                battery_pressure_mode:
+                  default: true
+                  description: 是否启用压力模式
+                  type: boolean
+                dual_drop_first_volume:
+                  default: 25
+                  description: 二次滴液第一次排液体积(μL)
+                  type: integer
+                dual_drop_mode:
+                  default: false
+                  description: 电解液添加模式(false=单次滴液, true=二次滴液)
+                  type: boolean
+                dual_drop_start_timing:
+                  default: false
+                  description: 二次滴液开始滴液时机(false=正极片前, true=正极片后)
+                  type: boolean
+                dual_drop_suction_timing:
+                  default: false
+                  description: 二次滴液吸液时机(false=正常吸液, true=先吸液)
+                  type: boolean
+                elec_num:
+                  description: 电解液瓶数
+                  type: string
+                elec_use_num:
+                  description: 每瓶电解液组装电池数
+                  type: string
+                elec_vol:
+                  default: 50
+                  description: 电解液吸液量(μL)
+                  type: integer
+                file_path:
+                  default: /Users/sml/work
+                  description: 实验记录保存路径
+                  type: string
+                fujipian_juzhendianwei:
+                  default: 0
+                  description: 负极片矩阵点位。盘位置从1开始计数，有效范围：1-8, 13-20 (写入值比实际位置少1，例如：写0取盘位1，写1取盘位2)
+                  type: integer
+                fujipian_panshu:
+                  default: 0
+                  description: 负极片盘数
+                  type: integer
+                gemo_juzhendianwei:
+                  default: 0
+                  description: 隔膜矩阵点位。盘位置从1开始计数，有效范围：1-8, 13-20 (写入值比实际位置少1，例如：写0取盘位1，写1取盘位2)
+                  type: integer
+                gemopanshu:
+                  default: 0
+                  description: 隔膜盘数
+                  type: integer
+                lvbodian:
+                  default: true
+                  description: 是否使用铝箔垫片
+                  type: boolean
+                qiangtou_juzhendianwei:
+                  default: 0
+                  description: 枪头盒矩阵点位。盘位置从1开始计数，有效范围：1-32, 64-96 (写入值比实际位置少1，例如：写0取盘位1，写1取盘位2)
+                  type: integer
+              required:
+              - elec_num
+              - elec_use_num
+              type: object
+            result:
+              type: object
+          required:
+          - goal
+          title: func_allpack_cmd_simp参数
+          type: object
+        type: UniLabJsonCommand
+      auto-func_get_csv_export_status:
+        feedback: {}
+        goal: {}
+        goal_default: {}
+        handles: {}
+        placeholder_keys: {}
+        result: {}
+        schema:
+          description: ''
+          properties:
+            feedback: {}
+            goal:
+              properties: {}
+              required: []
+              type: object
+            result: {}
+          required:
+          - goal
+          title: func_get_csv_export_status参数
+          type: object
+        type: UniLabJsonCommand
+      auto-func_pack_device_auto:
+        feedback: {}
+        goal: {}
+        goal_default: {}
+        handles: {}
+        placeholder_keys: {}
+        result: {}
+        schema:
+          description: ''
+          properties:
+            feedback: {}
+            goal:
+              properties: {}
+              required: []
+              type: object
+            result: {}
+          required:
+          - goal
+          title: func_pack_device_auto参数
+          type: object
+        type: UniLabJsonCommand
+      auto-func_pack_device_init:
+        feedback: {}
+        goal: {}
+        goal_default: {}
+        handles: {}
+        placeholder_keys: {}
+        result: {}
+        schema:
+          description: ''
+          properties:
+            feedback: {}
+            goal:
+              properties: {}
+              required: []
+              type: object
+            result: {}
+          required:
+          - goal
+          title: func_pack_device_init参数
+          type: object
+        type: UniLabJsonCommand
+      auto-func_pack_device_init_auto_start_combined:
+        feedback: {}
+        goal: {}
+        goal_default:
+          material_search_enable: false
+        handles: {}
+        placeholder_keys: {}
+        result: {}
+        schema:
+          description: 组合函数:设备初始化 + 物料搜寻确认 + 切换自动模式 + 启动。初始化过程中会自动检测物料搜寻确认弹窗，并根据参数自动点击"是"或"否"按钮
+          properties:
+            feedback: {}
+            goal:
+              properties:
+                material_search_enable:
+                  default: false
+                  description: 是否启用物料搜寻功能。设备初始化后会弹出物料搜寻确认弹窗，此参数控制自动点击"是"(启用)或"否"(不启用)。默认为false(不启用物料搜寻)
+                  type: boolean
+              required: []
+              type: object
+            result:
+              type: boolean
+          required:
+          - goal
+          title: func_pack_device_init_auto_start_combined参数
+          type: object
+        type: UniLabJsonCommand
+      auto-func_pack_device_start:
+        feedback: {}
+        goal: {}
+        goal_default: {}
+        handles: {}
+        placeholder_keys: {}
+        result: {}
+        schema:
+          description: ''
+          properties:
+            feedback: {}
+            goal:
+              properties: {}
+              required: []
+              type: object
+            result: {}
+          required:
+          - goal
+          title: func_pack_device_start参数
+          type: object
+        type: UniLabJsonCommand
+      auto-func_pack_device_stop:
+        feedback: {}
+        goal: {}
+        goal_default: {}
+        handles: {}
+        placeholder_keys: {}
+        result: {}
+        schema:
+          description: ''
+          properties:
+            feedback: {}
+            goal:
+              properties: {}
+              required: []
+              type: object
+            result:
+              type: boolean
+          required:
+          - goal
+          title: func_pack_device_stop参数
+          type: object
+        type: UniLabJsonCommand
+      auto-func_pack_get_msg_cmd:
+        feedback: {}
+        goal: {}
+        goal_default:
+          file_path: D:\coin_cell_data
+        handles: {}
+        placeholder_keys: {}
+        result: {}
+        schema:
+          description: ''
+          properties:
+            feedback: {}
+            goal:
+              properties:
+                file_path:
+                  default: D:\coin_cell_data
+                  type: string
+              required: []
+              type: object
+            result:
+              type: boolean
+          required:
+          - goal
+          title: func_pack_get_msg_cmd参数
+          type: object
+        type: UniLabJsonCommand
+      auto-func_pack_send_bottle_num:
+        feedback: {}
+        goal: {}
+        goal_default:
+          bottle_num: null
+        handles:
+          input:
+          - data_key: bottle_num
+            data_source: workflow
+            data_type: integer
+            handler_key: bottle_count
+            io_type: source
+            label: 配液瓶数
+            required: true
+        placeholder_keys: {}
+        result: {}
+        schema:
+          description: ''
+          properties:
+            feedback: {}
+            goal:
+              properties:
+                bottle_num:
+                  type: string
+              required:
+              - bottle_num
+              type: object
+            result: {}
+          required:
+          - goal
+          title: func_pack_send_bottle_num参数
+          type: object
+        type: UniLabJsonCommand
+      auto-func_pack_send_finished_cmd:
+        feedback: {}
+        goal: {}
+        goal_default: {}
+        handles: {}
+        placeholder_keys: {}
+        result: {}
+        schema:
+          description: ''
+          properties:
+            feedback: {}
+            goal:
+              properties: {}
+              required: []
+              type: object
+            result:
+              type: boolean
+          required:
+          - goal
+          title: func_pack_send_finished_cmd参数
+          type: object
+        type: UniLabJsonCommand
+      auto-func_pack_send_msg_cmd:
+        feedback: {}
+        goal: {}
+        goal_default:
+          assembly_pressure: null
+          assembly_type: null
+          elec_use_num: null
+          elec_vol: null
+        handles: {}
+        placeholder_keys: {}
+        result: {}
+        schema:
+          description: ''
+          properties:
+            feedback: {}
+            goal:
+              properties:
+                assembly_pressure:
+                  type: string
+                assembly_type:
+                  type: string
+                elec_use_num:
+                  type: string
+                elec_vol:
+                  type: string
+              required:
+              - elec_use_num
+              - elec_vol
+              - assembly_type
+              - assembly_pressure
+              type: object
+            result:
+              type: boolean
+          required:
+          - goal
+          title: func_pack_send_msg_cmd参数
+          type: object
+        type: UniLabJsonCommand
+      auto-func_read_data_and_output:
+        feedback: {}
+        goal: {}
+        goal_default:
+          file_path: /Users/sml/work
+        handles: {}
+        placeholder_keys: {}
+        result: {}
+        schema:
+          description: ''
+          properties:
+            feedback: {}
+            goal:
+              properties:
+                file_path:
+                  default: /Users/sml/work
+                  type: string
+              required: []
+              type: object
+            result: {}
+          required:
+          - goal
+          title: func_read_data_and_output参数
+          type: object
+        type: UniLabJsonCommand
+      auto-func_sendbottle_allpack_multi:
+        feedback: {}
+        goal: {}
+        goal_default:
+          assembly_pressure: 4200
+          assembly_type: 7
+          battery_clean_ignore: false
+          battery_pressure_mode: true
+          dual_drop_first_volume: 25
+          dual_drop_mode: false
+          dual_drop_start_timing: false
+          dual_drop_suction_timing: false
+          elec_num: null
+          elec_use_num: null
+          elec_vol: 50
+          file_path: /Users/sml/work
+          fujipian_juzhendianwei: 0
+          fujipian_panshu: 0
+          gemo_juzhendianwei: 0
+          gemopanshu: 0
+          lvbodian: true
+          qiangtou_juzhendianwei: 0
+        handles:
+          input:
+          - data_key: elec_num
+            data_source: workflow
+            data_type: integer
+            handler_key: bottle_count
+            io_type: source
+            label: 配液瓶数
+            required: true
+        placeholder_keys: {}
+        result: {}
+        schema:
+          description: 发送瓶数+简化组装函数(适用于第二批次及后续批次)，合并了发送瓶数和简化组装流程
+          properties:
+            feedback: {}
+            goal:
+              properties:
+                assembly_pressure:
+                  default: 4200
+                  description: 电池压制力(N)
+                  type: integer
+                assembly_type:
+                  default: 7
+                  description: 组装类型(7=不用铝箔垫, 8=使用铝箔垫)
+                  type: integer
+                battery_clean_ignore:
+                  default: false
+                  description: 是否忽略电池清洁步骤
+                  type: boolean
+                battery_pressure_mode:
+                  default: true
+                  description: 是否启用压力模式
+                  type: boolean
+                dual_drop_first_volume:
+                  default: 25
+                  description: 二次滴液第一次排液体积(μL)
+                  type: integer
+                dual_drop_mode:
+                  default: false
+                  description: 电解液添加模式(false=单次滴液, true=二次滴液)
+                  type: boolean
+                dual_drop_start_timing:
+                  default: false
+                  description: 二次滴液开始滴液时机(false=正极片前, true=正极片后)
+                  type: boolean
+                dual_drop_suction_timing:
+                  default: false
+                  description: 二次滴液吸液时机(false=正常吸液, true=先吸液)
+                  type: boolean
+                elec_num:
+                  description: 电解液瓶数，如果在workflow中已通过handles连接上游(create_orders的bottle_count输出)，则此参数会自动从上游获取，无需手动填写；如果单独使用此函数(没有上游连接)，则必须手动填写电解液瓶数
+                  type: string
+                elec_use_num:
+                  description: 每瓶电解液组装电池数
+                  type: string
+                elec_vol:
+                  default: 50
+                  description: 电解液吸液量(μL)
+                  type: integer
+                file_path:
+                  default: /Users/sml/work
+                  description: 实验记录保存路径
+                  type: string
+                fujipian_juzhendianwei:
+                  default: 0
+                  description: 负极片矩阵点位。盘位置从1开始计数，有效范围：1-8, 13-20 (写入值比实际位置少1，例如：写0取盘位1，写1取盘位2)
+                  type: integer
+                fujipian_panshu:
+                  default: 0
+                  description: 负极片盘数
+                  type: integer
+                gemo_juzhendianwei:
+                  default: 0
+                  description: 隔膜矩阵点位。盘位置从1开始计数，有效范围：1-8, 13-20 (写入值比实际位置少1，例如：写0取盘位1，写1取盘位2)
+                  type: integer
+                gemopanshu:
+                  default: 0
+                  description: 隔膜盘数
+                  type: integer
+                lvbodian:
+                  default: true
+                  description: 是否使用铝箔垫片
+                  type: boolean
+                qiangtou_juzhendianwei:
+                  default: 0
+                  description: 枪头盒矩阵点位。盘位置从1开始计数，有效范围：1-32, 64-96 (写入值比实际位置少1，例如：写0取盘位1，写1取盘位2)
+                  type: integer
+              required:
+              - elec_num
+              - elec_use_num
+              type: object
+            result:
+              type: object
+          required:
+          - goal
+          title: func_sendbottle_allpack_multi参数
+          type: object
+        type: UniLabJsonCommand
+      auto-func_stop_read_data:
+        feedback: {}
+        goal: {}
+        goal_default: {}
+        handles: {}
+        placeholder_keys: {}
+        result: {}
+        schema:
+          description: ''
+          properties:
+            feedback: {}
+            goal:
+              properties: {}
+              required: []
+              type: object
+            result: {}
+          required:
+          - goal
+          title: func_stop_read_data参数
+          type: object
+        type: UniLabJsonCommand
+      auto-modify_deck_name:
+        feedback: {}
+        goal: {}
+        goal_default:
+          resource_name: null
+        handles: {}
+        placeholder_keys: {}
+        result: {}
+        schema:
+          description: ''
+          properties:
+            feedback: {}
+            goal:
+              properties:
+                resource_name:
+                  type: string
+              required:
+              - resource_name
+              type: object
+            result: {}
+          required:
+          - goal
+          title: modify_deck_name参数
+          type: object
+        type: UniLabJsonCommand
+      auto-qiming_coin_cell_code:
+        feedback: {}
+        goal: {}
+        goal_default:
+          battery_clean_ignore: false
+          battery_pressure: 4000
+          battery_pressure_mode: true
+          fujipian_juzhendianwei: 0
+          fujipian_panshu: null
+          gemo_juzhendianwei: 0
+          gemopanshu: 0
+          lvbodian: true
+        handles: {}
+        placeholder_keys: {}
+        result: {}
+        schema:
+          description: ''
+          properties:
+            feedback: {}
+            goal:
+              properties:
+                battery_clean_ignore:
+                  default: false
+                  type: boolean
+                battery_pressure:
+                  default: 4000
+                  type: integer
+                battery_pressure_mode:
+                  default: true
+                  type: boolean
+                fujipian_juzhendianwei:
+                  default: 0
+                  type: integer
+                fujipian_panshu:
+                  type: integer
+                gemo_juzhendianwei:
+                  default: 0
+                  type: integer
+                gemopanshu:
+                  default: 0
+                  type: integer
+                lvbodian:
+                  default: true
+                  type: boolean
+              required:
+              - fujipian_panshu
+              type: object
+            result:
+              type: boolean
+          required:
+          - goal
+          title: qiming_coin_cell_code参数
+          type: object
+        type: UniLabJsonCommand
+    module: unilabos.devices.workstation.coin_cell_assembly.coin_cell_assembly:CoinCellAssemblyWorkstation
+    status_types:
+      data_assembly_coin_cell_num: int
+      data_assembly_pressure: int
+      data_assembly_time: float
+      data_axis_x_pos: float
+      data_axis_y_pos: float
+      data_axis_z_pos: float
+      data_coin_cell_code: str
+      data_coin_num: int
+      data_electrolyte_code: str
+      data_electrolyte_volume: int
+      data_glove_box_o2_content: float
+      data_glove_box_pressure: float
+      data_glove_box_water_content: float
+      data_open_circuit_voltage: float
+      data_pole_weight: float
+      request_rec_msg_status: bool
+      request_send_msg_status: bool
+      sys_mode: str
+      sys_status: str
+    type: python
+  config_info: []
+  description: ''
+  handles: []
+  icon: koudian.webp
+  init_param_schema:
+    config:
+      properties:
+        address:
+          default: 172.16.28.102
+          type: string
+        config:
+          type: object
+        debug_mode:
+          default: false
+          type: boolean
+        deck:
+          type: string
+        port:
+          default: '502'
+          type: string
+      required: []
+      type: object
+    data:
+      properties:
+        data_assembly_coin_cell_num:
+          type: integer
+        data_assembly_pressure:
+          type: integer
+        data_assembly_time:
+          type: number
+        data_axis_x_pos:
+          type: number
+        data_axis_y_pos:
+          type: number
+        data_axis_z_pos:
+          type: number
+        data_coin_cell_code:
+          type: string
+        data_coin_num:
+          type: integer
+        data_electrolyte_code:
+          type: string
+        data_electrolyte_volume:
+          type: integer
+        data_glove_box_o2_content:
+          type: number
+        data_glove_box_pressure:
+          type: number
+        data_glove_box_water_content:
+          type: number
+        data_open_circuit_voltage:
+          type: number
+        data_pole_weight:
+          type: number
+        request_rec_msg_status:
+          type: boolean
+        request_send_msg_status:
+          type: boolean
+        sys_mode:
+          type: string
+        sys_status:
+          type: string
+      required:
+      - data_assembly_coin_cell_num
+      - data_assembly_pressure
+      - data_assembly_time
+      - data_axis_x_pos
+      - data_axis_y_pos
+      - data_axis_z_pos
+      - data_coin_cell_code
+      - data_coin_num
+      - data_electrolyte_code
+      - data_electrolyte_volume
+      - data_glove_box_o2_content
+      - data_glove_box_pressure
+      - data_glove_box_water_content
+      - data_open_circuit_voltage
+      - data_pole_weight
+      - request_rec_msg_status
+      - request_send_msg_status
+      - sys_mode
+      - sys_status
+      type: object
+  version: 1.0.0

unilabos/registry/devices/gas_handler.yaml

@@ -50,26 +50,25 @@ gas_source.mock:
         goal: {}
         goal_default: {}
         handles: {}
-        result: {}
+        placeholder_keys: {}
+        result:
+          return_info: return_info
         schema:
           description: ''
           properties:
             feedback:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: EmptyIn_Feedback
               type: object
             goal:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: EmptyIn_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
-              required:
-              - return_info
               title: EmptyIn_Result
               type: object
           required:
@@ -82,26 +81,25 @@ gas_source.mock:
         goal: {}
         goal_default: {}
         handles: {}
-        result: {}
+        placeholder_keys: {}
+        result:
+          return_info: return_info
         schema:
           description: ''
           properties:
             feedback:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: EmptyIn_Feedback
               type: object
             goal:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: EmptyIn_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
-              required:
-              - return_info
               title: EmptyIn_Result
               type: object
           required:
@@ -116,32 +114,31 @@ gas_source.mock:
         goal_default:
           string: ''
         handles: {}
-        result: {}
+        placeholder_keys: {}
+        result:
+          return_info: return_info
+          success: success
         schema:
           description: ''
           properties:
             feedback:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: StrSingleInput_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 string:
                   type: string
-              required:
-              - string
               title: StrSingleInput_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
                 success:
                   type: boolean
-              required:
-              - return_info
-              - success
               title: StrSingleInput_Result
               type: object
           required:
@@ -232,26 +229,25 @@ vacuum_pump.mock:
         goal: {}
         goal_default: {}
         handles: {}
-        result: {}
+        placeholder_keys: {}
+        result:
+          return_info: return_info
         schema:
           description: ''
           properties:
             feedback:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: EmptyIn_Feedback
               type: object
             goal:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: EmptyIn_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
-              required:
-              - return_info
               title: EmptyIn_Result
               type: object
           required:
@@ -264,26 +260,25 @@ vacuum_pump.mock:
         goal: {}
         goal_default: {}
         handles: {}
-        result: {}
+        placeholder_keys: {}
+        result:
+          return_info: return_info
         schema:
           description: ''
           properties:
             feedback:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: EmptyIn_Feedback
               type: object
             goal:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: EmptyIn_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
-              required:
-              - return_info
               title: EmptyIn_Result
               type: object
           required:
@@ -298,32 +293,31 @@ vacuum_pump.mock:
         goal_default:
           string: ''
         handles: {}
-        result: {}
+        placeholder_keys: {}
+        result:
+          return_info: return_info
+          success: success
         schema:
           description: ''
           properties:
             feedback:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: StrSingleInput_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 string:
                   type: string
-              required:
-              - string
               title: StrSingleInput_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
                 success:
                   type: boolean
-              required:
-              - return_info
-              - success
               title: StrSingleInput_Result
               type: object
           required:

unilabos/registry/devices/hotel.yaml

@@ -5,7 +5,7 @@ hotel.thermo_orbitor_rs2_hotel:
     action_value_mappings: {}
     module: unilabos.devices.resource_container.container:HotelContainer
     status_types:
-      rotation: String
+      rotation: ''
     type: python
   config_info: []
   description: Thermo Orbitor RS2 Hotel容器设备，用于实验室样品的存储和管理。该设备通过HotelContainer类实现容器的旋转控制和状态监控，主要用于存储实验样品、试剂瓶或其他实验器具，支持旋转功能以便于样品的自动化存取。适用于需要有序存储和快速访问大量样品的实验室自动化场景。

unilabos/registry/devices/laiyu_liquid_test.yaml

@@ -22,7 +22,8 @@ xyz_stepper_controller:
               required:
               - degrees
               type: object
-            result: {}
+            result:
+              type: integer
           required:
           - goal
           title: degrees_to_steps参数
@@ -47,7 +48,8 @@ xyz_stepper_controller:
               required:
               - axis
               type: object
-            result: {}
+            result:
+              type: boolean
           required:
           - goal
           title: emergency_stop参数
@@ -72,7 +74,10 @@ xyz_stepper_controller:
                   type: boolean
               required: []
               type: object
-            result: {}
+            result:
+              additionalProperties:
+                type: boolean
+              type: object
           required:
           - goal
           title: enable_all_axes参数
@@ -101,7 +106,8 @@ xyz_stepper_controller:
               required:
               - axis
               type: object
-            result: {}
+            result:
+              type: boolean
           required:
           - goal
           title: enable_motor参数
@@ -122,7 +128,10 @@ xyz_stepper_controller:
               properties: {}
               required: []
               type: object
-            result: {}
+            result:
+              additionalProperties:
+                type: boolean
+              type: object
           required:
           - goal
           title: home_all_axes参数
@@ -147,7 +156,8 @@ xyz_stepper_controller:
               required:
               - axis
               type: object
-            result: {}
+            result:
+              type: boolean
           required:
           - goal
           title: home_axis参数
@@ -188,7 +198,8 @@ xyz_stepper_controller:
               - axis
               - position
               type: object
-            result: {}
+            result:
+              type: boolean
           required:
           - goal
           title: move_to_position参数
@@ -229,7 +240,8 @@ xyz_stepper_controller:
               - axis
               - degrees
               type: object
-            result: {}
+            result:
+              type: boolean
           required:
           - goal
           title: move_to_position_degrees参数
@@ -270,7 +282,8 @@ xyz_stepper_controller:
               - axis
               - revolutions
               type: object
-            result: {}
+            result:
+              type: boolean
           required:
           - goal
           title: move_to_position_revolutions参数
@@ -301,14 +314,17 @@ xyz_stepper_controller:
                   default: 5000
                   type: integer
                 x:
-                  type: string
+                  type: integer
                 y:
-                  type: string
+                  type: integer
                 z:
-                  type: string
+                  type: integer
               required: []
               type: object
-            result: {}
+            result:
+              additionalProperties:
+                type: boolean
+              type: object
           required:
           - goal
           title: move_xyz参数
@@ -339,14 +355,17 @@ xyz_stepper_controller:
                   default: 5000
                   type: integer
                 x_deg:
-                  type: string
+                  type: number
                 y_deg:
-                  type: string
+                  type: number
                 z_deg:
-                  type: string
+                  type: number
               required: []
               type: object
-            result: {}
+            result:
+              additionalProperties:
+                type: boolean
+              type: object
           required:
           - goal
           title: move_xyz_degrees参数
@@ -377,14 +396,17 @@ xyz_stepper_controller:
                   default: 5000
                   type: integer
                 x_rev:
-                  type: string
+                  type: number
                 y_rev:
-                  type: string
+                  type: number
                 z_rev:
-                  type: string
+                  type: number
               required: []
               type: object
-            result: {}
+            result:
+              additionalProperties:
+                type: boolean
+              type: object
           required:
           - goal
           title: move_xyz_revolutions参数
@@ -409,7 +431,8 @@ xyz_stepper_controller:
               required:
               - revolutions
               type: object
-            result: {}
+            result:
+              type: integer
           required:
           - goal
           title: revolutions_to_steps参数
@@ -442,7 +465,8 @@ xyz_stepper_controller:
               - axis
               - speed
               type: object
-            result: {}
+            result:
+              type: boolean
           required:
           - goal
           title: set_speed_mode参数
@@ -467,7 +491,8 @@ xyz_stepper_controller:
               required:
               - steps
               type: object
-            result: {}
+            result:
+              type: number
           required:
           - goal
           title: steps_to_degrees参数
@@ -492,7 +517,8 @@ xyz_stepper_controller:
               required:
               - steps
               type: object
-            result: {}
+            result:
+              type: number
           required:
           - goal
           title: steps_to_revolutions参数
@@ -513,7 +539,10 @@ xyz_stepper_controller:
               properties: {}
               required: []
               type: object
-            result: {}
+            result:
+              additionalProperties:
+                type: boolean
+              type: object
           required:
           - goal
           title: stop_all_axes参数
@@ -542,7 +571,8 @@ xyz_stepper_controller:
               required:
               - axis
               type: object
-            result: {}
+            result:
+              type: boolean
           required:
           - goal
           title: wait_for_completion参数
@@ -550,8 +580,7 @@ xyz_stepper_controller:
         type: UniLabJsonCommand
     module: unilabos.devices.liquid_handling.laiyu.drivers.xyz_stepper_driver:XYZStepperController
     status_types:
-      all_positions: dict
+      all_positions: Dict[MotorAxis, MotorPosition]
-      motor_status: unilabos.devices.liquid_handling.laiyu.drivers.xyz_stepper_driver:MotorPosition
     type: python
   config_info: []
   description: 新XYZ控制器
@@ -574,12 +603,10 @@ xyz_stepper_controller:
     data:
       properties:
         all_positions:
+          additionalProperties:
             type: object
-        motor_status:
           type: object
       required:
-      - motor_status
       - all_positions
       type: object
-  registry_type: device
   version: 1.0.0

unilabos/registry/devices/neware_battery_test_system.yaml

@@ -5,31 +5,6 @@ neware_battery_test_system:
   - battery_test
   class:
     action_value_mappings:
-      auto-post_init:
-        feedback: {}
-        goal: {}
-        goal_default:
-          ros_node: null
-        handles: {}
-        placeholder_keys: {}
-        result: {}
-        schema:
-          description: ''
-          properties:
-            feedback: {}
-            goal:
-              properties:
-                ros_node:
-                  type: string
-              required:
-              - ros_node
-              type: object
-            result: {}
-          required:
-          - goal
-          title: post_init参数
-          type: object
-        type: UniLabJsonCommand
       auto-print_status_summary:
         feedback: {}
         goal: {}
@@ -66,7 +41,8 @@ neware_battery_test_system:
               properties: {}
               required: []
               type: object
-            result: {}
+            result:
+              type: boolean
           required:
           - goal
           title: test_connection参数
@@ -77,9 +53,8 @@ neware_battery_test_system:
         goal: {}
         goal_default: {}
         handles: {}
-        result:
+        placeholder_keys: {}
-          return_info: return_info
+        result: {}
-          success: success
         schema:
           description: 调试方法：显示所有资源的实际名称
           properties:
@@ -89,19 +64,10 @@ neware_battery_test_system:
               required: []
               type: object
             result:
-              properties:
-                return_info:
-                  description: 资源调试信息
-                  type: string
-                success:
-                  description: 是否成功
-                  type: boolean
-              required:
-              - return_info
-              - success
               type: object
           required:
           - goal
+          title: debug_resource_names参数
           type: object
         type: UniLabJsonCommand
       export_status_json:
@@ -111,9 +77,8 @@ neware_battery_test_system:
         goal_default:
           filepath: bts_status.json
         handles: {}
-        result:
+        placeholder_keys: {}
-          return_info: return_info
+        result: {}
-          success: success
         schema:
           description: 导出当前状态数据到JSON文件
           properties:
@@ -127,19 +92,10 @@ neware_battery_test_system:
               required: []
               type: object
             result:
-              properties:
-                return_info:
-                  description: 导出操作结果信息
-                  type: string
-                success:
-                  description: 导出是否成功
-                  type: boolean
-              required:
-              - return_info
-              - success
               type: object
           required:
           - goal
+          title: export_status_json参数
           type: object
         type: UniLabJsonCommand
       get_device_summary:
@@ -181,10 +137,8 @@ neware_battery_test_system:
         goal_default:
           plate_num: null
         handles: {}
-        result:
+        placeholder_keys: {}
-          plate_data: plate_data
+        result: {}
-          return_info: return_info
-          success: success
         schema:
           description: 获取指定盘或所有盘的状态信息
           properties:
@@ -193,29 +147,14 @@ neware_battery_test_system:
               properties:
                 plate_num:
                   description: 盘号 (1 或 2)，如果为null则返回所有盘的状态
-                  maximum: 2
-                  minimum: 1
                   type: integer
               required: []
               type: object
             result:
-              properties:
-                plate_data:
-                  description: 盘状态数据（单盘或所有盘）
-                  type: object
-                return_info:
-                  description: 操作结果信息
-                  type: string
-                success:
-                  description: 查询是否成功
-                  type: boolean
-              required:
-              - return_info
-              - success
-              - plate_data
               type: object
           required:
           - goal
+          title: get_plate_status参数
           type: object
         type: UniLabJsonCommand
       print_status_summary_action:
@@ -223,9 +162,8 @@ neware_battery_test_system:
         goal: {}
         goal_default: {}
         handles: {}
-        result:
+        placeholder_keys: {}
-          return_info: return_info
+        result: {}
-          success: success
         schema:
           description: 打印通道状态摘要信息到控制台
           properties:
@@ -235,28 +173,21 @@ neware_battery_test_system:
               required: []
               type: object
             result:
-              properties:
-                return_info:
-                  description: 打印操作结果信息
-                  type: string
-                success:
-                  description: 打印是否成功
-                  type: boolean
-              required:
-              - return_info
-              - success
               type: object
           required:
           - goal
+          title: print_status_summary_action参数
           type: object
         type: UniLabJsonCommand
       query_plate_action:
         feedback: {}
         goal:
-          string: plate_id
+          plate_id: plate_id
+          string: string
         goal_default:
           string: ''
         handles: {}
+        placeholder_keys: {}
         result:
           return_info: return_info
           success: success
@@ -264,27 +195,23 @@ neware_battery_test_system:
           description: ''
           properties:
             feedback:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: StrSingleInput_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 string:
                   type: string
-              required:
-              - string
               title: StrSingleInput_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
                 success:
                   type: boolean
-              required:
-              - return_info
-              - success
               title: StrSingleInput_Result
               type: object
           required:
@@ -298,13 +225,11 @@ neware_battery_test_system:
           csv_path: string
           output_dir: string
         goal_default:
-          csv_path: ''
+          csv_path: null
           output_dir: .
         handles: {}
-        result:
+        placeholder_keys: {}
-          return_info: return_info
+        result: {}
-          submitted_count: submitted_count
-          success: success
         schema:
           description: 从CSV文件批量提交Neware测试任务
           properties:
@@ -315,31 +240,17 @@ neware_battery_test_system:
                   description: 输入CSV文件的绝对路径
                   type: string
                 output_dir:
+                  default: .
                   description: 输出目录（用于存储XML和备份文件），默认当前目录
                   type: string
               required:
               - csv_path
               type: object
             result:
-              properties:
-                return_info:
-                  description: 执行结果详细信息
-                  type: string
-                submitted_count:
-                  description: 成功提交的任务数量
-                  type: integer
-                success:
-                  description: 是否成功
-                  type: boolean
-                total_count:
-                  description: CSV文件中的总行数
-                  type: integer
-              required:
-              - return_info
-              - success
               type: object
           required:
           - goal
+          title: submit_from_csv参数
           type: object
         type: UniLabJsonCommand
       test_connection_action:
@@ -347,9 +258,8 @@ neware_battery_test_system:
         goal: {}
         goal_default: {}
         handles: {}
-        result:
+        placeholder_keys: {}
-          return_info: return_info
+        result: {}
-          success: success
         schema:
           description: 测试与电池测试系统的TCP连接
           properties:
@@ -359,19 +269,10 @@ neware_battery_test_system:
               required: []
               type: object
             result:
-              properties:
-                return_info:
-                  description: 连接测试结果信息
-                  type: string
-                success:
-                  description: 连接测试是否成功
-                  type: boolean
-              required:
-              - return_info
-              - success
               type: object
           required:
           - goal
+          title: test_connection_action参数
           type: object
         type: UniLabJsonCommand
       upload_backup_to_oss:
@@ -392,12 +293,8 @@ neware_battery_test_system:
             handler_key: uploaded_files
             io_type: sink
             label: Uploaded Files (with standard flow info)
-        result:
+        placeholder_keys: {}
-          failed_files: failed_files
+        result: {}
-          return_info: return_info
-          success: success
-          total_count: total_count
-          uploaded_count: uploaded_count
         schema:
           description: 上传备份文件到阿里云OSS
           properties:
@@ -417,65 +314,17 @@ neware_battery_test_system:
               required: []
               type: object
             result:
-              properties:
-                failed_files:
-                  description: 上传失败的文件名列表
-                  items:
-                    type: string
-                  type: array
-                return_info:
-                  description: 上传操作结果信息
-                  type: string
-                success:
-                  description: 上传是否成功
-                  type: boolean
-                total_count:
-                  description: 总文件数
-                  type: integer
-                uploaded_count:
-                  description: 成功上传的文件数
-                  type: integer
-                uploaded_files:
-                  description: 成功上传的文件详情列表
-                  items:
-                    properties:
-                      Battery_Code:
-                        description: 电池编码
-                        type: string
-                      Electrolyte_Code:
-                        description: 电解液编码
-                        type: string
-                      filename:
-                        description: 文件名
-                        type: string
-                      url:
-                        description: OSS下载链接
-                        type: string
-                    required:
-                    - filename
-                    - url
-                    - Battery_Code
-                    - Electrolyte_Code
-                    type: object
-                  type: array
-              required:
-              - return_info
-              - success
-              - uploaded_count
-              - total_count
-              - failed_files
-              - uploaded_files
               type: object
           required:
           - goal
+          title: upload_backup_to_oss参数
           type: object
         type: UniLabJsonCommand
     module: unilabos.devices.neware_battery_test_system.neware_battery_test_system:NewareBatteryTestSystem
     status_types:
-      channel_status: dict
+      channel_status: Dict[int, Dict]
-      connection_info: dict
+      connection_info: Dict[str, str]
       device_summary: dict
-      plate_status: dict
       status: str
       total_channels: int
     type: python
@@ -517,23 +366,24 @@ neware_battery_test_system:
     data:
       properties:
         channel_status:
+          additionalProperties:
+            type: object
           type: object
         connection_info:
+          additionalProperties:
+            type: string
           type: object
         device_summary:
           type: object
-        plate_status:
-          type: object
         status:
           type: string
         total_channels:
           type: integer
       required:
-      - status
       - channel_status
       - connection_info
-      - total_channels
-      - plate_status
       - device_summary
+      - status
+      - total_channels
       type: object
   version: 1.0.0

unilabos/registry/devices/opcua_example.yaml

@@ -49,32 +49,7 @@ opcua_example:
           title: load_config参数
           type: object
         type: UniLabJsonCommand
-      auto-post_init:
+      auto-refresh_node_values:
-        feedback: {}
-        goal: {}
-        goal_default:
-          ros_node: null
-        handles: {}
-        placeholder_keys: {}
-        result: {}
-        schema:
-          description: ''
-          properties:
-            feedback: {}
-            goal:
-              properties:
-                ros_node:
-                  type: string
-              required:
-              - ros_node
-              type: object
-            result: {}
-          required:
-          - goal
-          title: post_init参数
-          type: object
-        type: UniLabJsonCommand
-      auto-print_cache_stats:
         feedback: {}
         goal: {}
         goal_default: {}
@@ -92,32 +67,7 @@ opcua_example:
             result: {}
           required:
           - goal
-          title: print_cache_stats参数
+          title: refresh_node_values参数
-          type: object
-        type: UniLabJsonCommand
-      auto-read_node:
-        feedback: {}
-        goal: {}
-        goal_default:
-          node_name: null
-        handles: {}
-        placeholder_keys: {}
-        result: {}
-        schema:
-          description: ''
-          properties:
-            feedback: {}
-            goal:
-              properties:
-                node_name:
-                  type: string
-              required:
-              - node_name
-              type: object
-            result: {}
-          required:
-          - goal
-          title: read_node参数
           type: object
         type: UniLabJsonCommand
       auto-set_node_value:
@@ -149,10 +99,50 @@ opcua_example:
           title: set_node_value参数
           type: object
         type: UniLabJsonCommand
+      auto-start_node_refresh:
+        feedback: {}
+        goal: {}
+        goal_default: {}
+        handles: {}
+        placeholder_keys: {}
+        result: {}
+        schema:
+          description: ''
+          properties:
+            feedback: {}
+            goal:
+              properties: {}
+              required: []
+              type: object
+            result: {}
+          required:
+          - goal
+          title: start_node_refresh参数
+          type: object
+        type: UniLabJsonCommand
+      auto-stop_node_refresh:
+        feedback: {}
+        goal: {}
+        goal_default: {}
+        handles: {}
+        placeholder_keys: {}
+        result: {}
+        schema:
+          description: ''
+          properties:
+            feedback: {}
+            goal:
+              properties: {}
+              required: []
+              type: object
+            result: {}
+          required:
+          - goal
+          title: stop_node_refresh参数
+          type: object
+        type: UniLabJsonCommand
     module: unilabos.device_comms.opcua_client.client:OpcUaClient
-    status_types:
+    status_types: {}
-      cache_stats: dict
-      node_value: String
     type: python
   config_info: []
   description: null
@@ -161,36 +151,22 @@ opcua_example:
   init_param_schema:
     config:
       properties:
-        cache_timeout:
-          default: 5.0
-          type: number
         config_path:
           type: string
-        deck:
-          type: string
         password:
           type: string
-        subscription_interval:
+        refresh_interval:
-          default: 500
+          default: 1.0
-          type: integer
+          type: number
         url:
           type: string
-        use_subscription:
-          default: true
-          type: boolean
         username:
           type: string
       required:
       - url
       type: object
     data:
-      properties:
+      properties: {}
-        cache_stats:
+      required: []
-          type: object
-        node_value:
-          type: string
-      required:
-      - node_value
-      - cache_stats
       type: object
   version: 1.0.0

unilabos/registry/devices/opsky_ATR30007.yaml

@@ -80,7 +80,8 @@ opsky_ATR30007:
                   type: string
               required: []
               type: object
-            result: {}
+            result:
+              type: object
           required:
           - goal
           title: run_once参数

unilabos/registry/devices/organic_miscellaneous.yaml

@@ -100,42 +100,41 @@ rotavap.one:
           type: object
         type: UniLabJsonCommand
       set_timer:
-        feedback: {}
+        feedback:
+          status: status
         goal:
           command: command
         goal_default:
           command: ''
         handles: {}
+        placeholder_keys: {}
         result:
+          return_info: return_info
           success: success
         schema:
           description: ''
           properties:
             feedback:
+              additionalProperties: false
               properties:
                 status:
                   type: string
-              required:
-              - status
               title: SendCmd_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 command:
                   type: string
-              required:
-              - command
               title: SendCmd_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
                 success:
                   type: boolean
-              required:
-              - return_info
-              - success
               title: SendCmd_Result
               type: object
           required:
@@ -250,9 +249,13 @@ separator.homemade:
         feedback:
           status: status
         goal:
+          event: event
           settling_time: settling_time
           stir_speed: stir_speed
-          stir_time: stir_time,
+          stir_time: stir_time
+          time: time
+          time_spec: time_spec
+          vessel: vessel
         goal_default:
           event: ''
           settling_time: ''
@@ -281,34 +284,42 @@ separator.homemade:
             sample_id: ''
             type: ''
         handles: {}
+        placeholder_keys: {}
         result:
+          message: message
+          return_info: return_info
           success: success
         schema:
           description: ''
           properties:
             feedback:
+              additionalProperties: false
               properties:
                 status:
                   type: string
-              required:
-              - status
               title: Stir_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 event:
                   type: string
                 settling_time:
                   type: string
                 stir_speed:
+                  maximum: 1.7976931348623157e+308
+                  minimum: -1.7976931348623157e+308
                   type: number
                 stir_time:
+                  maximum: 1.7976931348623157e+308
+                  minimum: -1.7976931348623157e+308
                   type: number
                 time:
                   type: string
                 time_spec:
                   type: string
                 vessel:
+                  additionalProperties: false
                   properties:
                     category:
                       type: string
@@ -327,16 +338,26 @@ separator.homemade:
                     parent:
                       type: string
                     pose:
+                      additionalProperties: false
                       properties:
                         orientation:
+                          additionalProperties: false
                           properties:
                             w:
+                              maximum: 1.7976931348623157e+308
+                              minimum: -1.7976931348623157e+308
                               type: number
                             x:
+                              maximum: 1.7976931348623157e+308
+                              minimum: -1.7976931348623157e+308
                               type: number
                             y:
+                              maximum: 1.7976931348623157e+308
+                              minimum: -1.7976931348623157e+308
                               type: number
                             z:
+                              maximum: 1.7976931348623157e+308
+                              minimum: -1.7976931348623157e+308
                               type: number
                           required:
                           - x
@@ -346,12 +367,19 @@ separator.homemade:
                           title: orientation
                           type: object
                         position:
+                          additionalProperties: false
                           properties:
                             x:
+                              maximum: 1.7976931348623157e+308
+                              minimum: -1.7976931348623157e+308
                               type: number
                             y:
+                              maximum: 1.7976931348623157e+308
+                              minimum: -1.7976931348623157e+308
                               type: number
                             z:
+                              maximum: 1.7976931348623157e+308
+                              minimum: -1.7976931348623157e+308
                               type: number
                           required:
                           - x
@@ -381,17 +409,10 @@ separator.homemade:
                   - data
                   title: vessel
                   type: object
-              required:
-              - vessel
-              - time
-              - event
-              - time_spec
-              - stir_time
-              - stir_speed
-              - settling_time
               title: Stir_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 message:
                   type: string
@@ -399,10 +420,6 @@ separator.homemade:
                   type: string
                 success:
                   type: boolean
-              required:
-              - success
-              - message
-              - return_info
               title: Stir_Result
               type: object
           required:
@@ -418,36 +435,34 @@ separator.homemade:
         goal_default:
           command: ''
         handles: {}
+        placeholder_keys: {}
         result:
+          return_info: return_info
           success: success
         schema:
           description: ''
           properties:
             feedback:
+              additionalProperties: false
               properties:
                 status:
                   type: string
-              required:
-              - status
               title: SendCmd_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 command:
                   type: string
-              required:
-              - command
               title: SendCmd_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
                 success:
                   type: boolean
-              required:
-              - return_info
-              - success
               title: SendCmd_Result
               type: object
           required:

unilabos/registry/devices/post_process_station.yaml

@@ -28,31 +28,6 @@ post_process_station:
           title: load_config参数
           type: object
         type: UniLabJsonCommand
-      auto-post_init:
-        feedback: {}
-        goal: {}
-        goal_default:
-          ros_node: null
-        handles: {}
-        placeholder_keys: {}
-        result: {}
-        schema:
-          description: ''
-          properties:
-            feedback: {}
-            goal:
-              properties:
-                ros_node:
-                  type: string
-              required:
-              - ros_node
-              type: object
-            result: {}
-          required:
-          - goal
-          title: post_init参数
-          type: object
-        type: UniLabJsonCommand
       auto-print_cache_stats:
         feedback: {}
         goal: {}
@@ -104,42 +79,41 @@ post_process_station:
           type: object
         type: UniLabJsonCommand
       disconnect:
-        feedback: {}
+        feedback:
+          status: status
         goal:
-          command: {}
+          command: command
         goal_default:
           command: ''
         handles: {}
+        placeholder_keys: {}
         result:
+          return_info: return_info
           success: success
         schema:
           description: ''
           properties:
             feedback:
+              additionalProperties: false
               properties:
                 status:
                   type: string
-              required:
-              - status
               title: SendCmd_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 command:
                   type: string
-              required:
-              - command
               title: SendCmd_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
                 success:
                   type: boolean
-              required:
-              - return_info
-              - success
               title: SendCmd_Result
               type: object
           required:
@@ -149,42 +123,41 @@ post_process_station:
         type: SendCmd
       read_node:
         feedback:
-          result: result
+          status: status
         goal:
-          command: node_name
+          command: command
+          node_name: node_name
         goal_default:
           command: ''
         handles: {}
+        placeholder_keys: {}
         result:
+          return_info: return_info
           success: success
         schema:
           description: ''
           properties:
             feedback:
+              additionalProperties: false
               properties:
                 status:
                   type: string
-              required:
-              - status
               title: SendCmd_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 command:
                   type: string
-              required:
-              - command
               title: SendCmd_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
                 success:
                   type: boolean
-              required:
-              - return_info
-              - success
               title: SendCmd_Result
               type: object
           required:
@@ -283,17 +256,19 @@ post_process_station:
           description: ''
           properties:
             feedback:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: PostProcessTriggerClean_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 acetone_inner_wall_cleaning_count:
                   maximum: 2147483647
                   minimum: -2147483648
                   type: integer
                 acetone_inner_wall_cleaning_injection:
+                  maximum: 1.7976931348623157e+308
+                  minimum: -1.7976931348623157e+308
                   type: number
                 acetone_inner_wall_cleaning_waste_time:
                   maximum: 2147483647
@@ -304,6 +279,8 @@ post_process_station:
                   minimum: -2147483648
                   type: integer
                 acetone_outer_wall_cleaning_injection:
+                  maximum: 1.7976931348623157e+308
+                  minimum: -1.7976931348623157e+308
                   type: number
                 acetone_outer_wall_cleaning_wait_time:
                   maximum: 2147483647
@@ -322,6 +299,8 @@ post_process_station:
                   minimum: -2147483648
                   type: integer
                 acetone_stirrer_cleaning_injection:
+                  maximum: 1.7976931348623157e+308
+                  minimum: -1.7976931348623157e+308
                   type: number
                 acetone_stirrer_cleaning_wait_time:
                   maximum: 2147483647
@@ -348,6 +327,8 @@ post_process_station:
                   minimum: -2147483648
                   type: integer
                 nmp_inner_wall_cleaning_injection:
+                  maximum: 1.7976931348623157e+308
+                  minimum: -1.7976931348623157e+308
                   type: number
                 nmp_inner_wall_cleaning_waste_time:
                   maximum: 2147483647
@@ -358,6 +339,8 @@ post_process_station:
                   minimum: -2147483648
                   type: integer
                 nmp_outer_wall_cleaning_injection:
+                  maximum: 1.7976931348623157e+308
+                  minimum: -1.7976931348623157e+308
                   type: number
                 nmp_outer_wall_cleaning_wait_time:
                   maximum: 2147483647
@@ -376,6 +359,8 @@ post_process_station:
                   minimum: -2147483648
                   type: integer
                 nmp_stirrer_cleaning_injection:
+                  maximum: 1.7976931348623157e+308
+                  minimum: -1.7976931348623157e+308
                   type: number
                 nmp_stirrer_cleaning_wait_time:
                   maximum: 2147483647
@@ -394,6 +379,8 @@ post_process_station:
                   minimum: -2147483648
                   type: integer
                 water_inner_wall_cleaning_injection:
+                  maximum: 1.7976931348623157e+308
+                  minimum: -1.7976931348623157e+308
                   type: number
                 water_inner_wall_cleaning_waste_time:
                   maximum: 2147483647
@@ -404,6 +391,8 @@ post_process_station:
                   minimum: -2147483648
                   type: integer
                 water_outer_wall_cleaning_injection:
+                  maximum: 1.7976931348623157e+308
+                  minimum: -1.7976931348623157e+308
                   type: number
                 water_outer_wall_cleaning_wait_time:
                   maximum: 2147483647
@@ -422,6 +411,8 @@ post_process_station:
                   minimum: -2147483648
                   type: integer
                 water_stirrer_cleaning_injection:
+                  maximum: 1.7976931348623157e+308
+                  minimum: -1.7976931348623157e+308
                   type: number
                 water_stirrer_cleaning_wait_time:
                   maximum: 2147483647
@@ -431,55 +422,13 @@ post_process_station:
                   maximum: 2147483647
                   minimum: -2147483648
                   type: integer
-              required:
-              - nmp_outer_wall_cleaning_injection
-              - nmp_outer_wall_cleaning_count
-              - nmp_outer_wall_cleaning_wait_time
-              - nmp_outer_wall_cleaning_waste_time
-              - nmp_inner_wall_cleaning_injection
-              - nmp_inner_wall_cleaning_count
-              - nmp_pump_cleaning_suction_count
-              - nmp_inner_wall_cleaning_waste_time
-              - nmp_stirrer_cleaning_injection
-              - nmp_stirrer_cleaning_count
-              - nmp_stirrer_cleaning_wait_time
-              - nmp_stirrer_cleaning_waste_time
-              - water_outer_wall_cleaning_injection
-              - water_outer_wall_cleaning_count
-              - water_outer_wall_cleaning_wait_time
-              - water_outer_wall_cleaning_waste_time
-              - water_inner_wall_cleaning_injection
-              - water_inner_wall_cleaning_count
-              - water_pump_cleaning_suction_count
-              - water_inner_wall_cleaning_waste_time
-              - water_stirrer_cleaning_injection
-              - water_stirrer_cleaning_count
-              - water_stirrer_cleaning_wait_time
-              - water_stirrer_cleaning_waste_time
-              - acetone_outer_wall_cleaning_injection
-              - acetone_outer_wall_cleaning_count
-              - acetone_outer_wall_cleaning_wait_time
-              - acetone_outer_wall_cleaning_waste_time
-              - acetone_inner_wall_cleaning_injection
-              - acetone_inner_wall_cleaning_count
-              - acetone_pump_cleaning_suction_count
-              - acetone_inner_wall_cleaning_waste_time
-              - acetone_stirrer_cleaning_injection
-              - acetone_stirrer_cleaning_count
-              - acetone_stirrer_cleaning_wait_time
-              - acetone_stirrer_cleaning_waste_time
-              - pipe_blowing_time
-              - injection_pump_forward_empty_suction_count
-              - injection_pump_reverse_empty_suction_count
-              - filtration_liquid_selection
               title: PostProcessTriggerClean_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
-              required:
-              - return_info
               title: PostProcessTriggerClean_Result
               type: object
           required:
@@ -502,11 +451,11 @@ post_process_station:
           description: ''
           properties:
             feedback:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: PostProcessGrab_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 raw_tank_number:
                   maximum: 2147483647
@@ -516,17 +465,13 @@ post_process_station:
                   maximum: 2147483647
                   minimum: -2147483648
                   type: integer
-              required:
-              - reaction_tank_number
-              - raw_tank_number
               title: PostProcessGrab_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
-              required:
-              - return_info
               title: PostProcessGrab_Result
               type: object
           required:
@@ -573,13 +518,15 @@ post_process_station:
           description: ''
           properties:
             feedback:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: PostProcessTriggerPostPro_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 atomization_fast_speed:
+                  maximum: 1.7976931348623157e+308
+                  minimum: -1.7976931348623157e+308
                   type: number
                 atomization_pressure_kpa:
                   maximum: 2147483647
@@ -594,8 +541,12 @@ post_process_station:
                   minimum: -2147483648
                   type: integer
                 first_wash_water_amount:
+                  maximum: 1.7976931348623157e+308
+                  minimum: -1.7976931348623157e+308
                   type: number
                 initial_water_amount:
+                  maximum: 1.7976931348623157e+308
+                  minimum: -1.7976931348623157e+308
                   type: number
                 injection_pump_push_speed:
                   maximum: 2147483647
@@ -622,32 +573,20 @@ post_process_station:
                   minimum: -2147483648
                   type: integer
                 second_wash_water_amount:
+                  maximum: 1.7976931348623157e+308
+                  minimum: -1.7976931348623157e+308
                   type: number
                 wash_slow_speed:
+                  maximum: 1.7976931348623157e+308
+                  minimum: -1.7976931348623157e+308
                   type: number
-              required:
-              - atomization_fast_speed
-              - wash_slow_speed
-              - injection_pump_suction_speed
-              - injection_pump_push_speed
-              - raw_liquid_suction_count
-              - first_wash_water_amount
-              - second_wash_water_amount
-              - first_powder_mixing_tim
-              - second_powder_mixing_time
-              - first_powder_wash_count
-              - second_powder_wash_count
-              - initial_water_amount
-              - pre_filtration_mixing_time
-              - atomization_pressure_kpa
               title: PostProcessTriggerPostPro_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
-              required:
-              - return_info
               title: PostProcessTriggerPostPro_Result
               type: object
           required:
@@ -669,30 +608,26 @@ post_process_station:
           description: ''
           properties:
             feedback:
+              additionalProperties: false
               properties:
                 status:
                   type: string
-              required:
-              - status
               title: SendCmd_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 command:
                   type: string
-              required:
-              - command
               title: SendCmd_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
                 success:
                   type: boolean
-              required:
-              - return_info
-              - success
               title: SendCmd_Result
               type: object
           required:
@@ -702,8 +637,7 @@ post_process_station:
         type: SendCmd
     module: unilabos.devices.workstation.post_process.post_process:OpcUaClient
     status_types:
-      cache_stats: dict
+      cache_stats: Dict[str, Any]
-      node_value: String
     type: python
   config_info: []
   description: 后处理站
@@ -718,7 +652,9 @@ post_process_station:
         config_path:
           type: string
         deck:
-          type: string
+          anyOf:
+          - type: object
+          - type: object
         password:
           type: string
         subscription_interval:
@@ -738,10 +674,7 @@ post_process_station:
       properties:
         cache_stats:
           type: object
-        node_value:
-          type: string
       required:
-      - node_value
       - cache_stats
       type: object
   version: 1.0.0

unilabos/registry/devices/pump_and_valve.yaml

@@ -136,36 +136,36 @@ solenoid_valve:
       set_valve_position:
         feedback: {}
         goal:
-          string: position
+          position: position
+          string: string
         goal_default:
           string: ''
         handles: {}
-        result: {}
+        placeholder_keys: {}
+        result:
+          return_info: return_info
+          success: success
         schema:
           description: ''
           properties:
             feedback:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: StrSingleInput_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 string:
                   type: string
-              required:
-              - string
               title: StrSingleInput_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
                 success:
                   type: boolean
-              required:
-              - return_info
-              - success
               title: StrSingleInput_Result
               type: object
           required:
@@ -278,26 +278,25 @@ solenoid_valve.mock:
         goal: {}
         goal_default: {}
         handles: {}
-        result: {}
+        placeholder_keys: {}
+        result:
+          return_info: return_info
         schema:
           description: ''
           properties:
             feedback:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: EmptyIn_Feedback
               type: object
             goal:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: EmptyIn_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
-              required:
-              - return_info
               title: EmptyIn_Result
               type: object
           required:
@@ -310,26 +309,25 @@ solenoid_valve.mock:
         goal: {}
         goal_default: {}
         handles: {}
-        result: {}
+        placeholder_keys: {}
+        result:
+          return_info: return_info
         schema:
           description: ''
           properties:
             feedback:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: EmptyIn_Feedback
               type: object
             goal:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: EmptyIn_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
-              required:
-              - return_info
               title: EmptyIn_Result
               type: object
           required:
@@ -422,6 +420,27 @@ syringe_pump_with_valve.runze.SY03B-T06:
           title: initialize参数
           type: object
         type: UniLabJsonCommand
+      auto-list:
+        feedback: {}
+        goal: {}
+        goal_default: {}
+        handles: {}
+        placeholder_keys: {}
+        result: {}
+        schema:
+          description: list的参数schema
+          properties:
+            feedback: {}
+            goal:
+              properties: {}
+              required: []
+              type: object
+            result: {}
+          required:
+          - goal
+          title: list参数
+          type: object
+        type: UniLabJsonCommand
       auto-pull_plunger:
         feedback: {}
         goal: {}
@@ -695,7 +714,10 @@ syringe_pump_with_valve.runze.SY03B-T06:
             goal:
               properties:
                 position:
-                  type: string
+                  anyOf:
+                  - type: integer
+                  - type: string
+                  - type: number
               required:
               - position
               type: object
@@ -720,7 +742,9 @@ syringe_pump_with_valve.runze.SY03B-T06:
             goal:
               properties:
                 velocity:
-                  type: string
+                  anyOf:
+                  - type: integer
+                  - type: string
               required:
               - velocity
               type: object
@@ -780,13 +804,13 @@ syringe_pump_with_valve.runze.SY03B-T06:
     status_types:
       max_velocity: float
       mode: int
-      plunger_position: String
+      plunger_position: ''
       position: float
       status: str
       valve_position: str
-      velocity_end: String
+      velocity_end: ''
-      velocity_grade: String
+      velocity_grade: ''
-      velocity_init: String
+      velocity_init: ''
     type: python
   config_info: []
   description: 润泽精密注射泵设备，集成阀门控制的高精度流体输送系统。该设备通过串口通信控制，支持多种运行模式和精确的体积控制。具备可变速度控制、精密定位、阀门切换、实时状态监控等功能。适用于微量液体输送、精密进样、流速控制、化学反应进料等需要高精度流体操作的实验室自动化应用。
@@ -885,15 +909,15 @@ syringe_pump_with_valve.runze.SY03B-T06:
         velocity_init:
           type: string
       required:
-      - status
-      - mode
       - max_velocity
+      - mode
+      - plunger_position
+      - position
+      - status
+      - valve_position
+      - velocity_end
       - velocity_grade
       - velocity_init
-      - velocity_end
-      - valve_position
-      - position
-      - plunger_position
       type: object
   version: 1.0.0
 syringe_pump_with_valve.runze.SY03B-T08:
@@ -943,6 +967,27 @@ syringe_pump_with_valve.runze.SY03B-T08:
           title: initialize参数
           type: object
         type: UniLabJsonCommand
+      auto-list:
+        feedback: {}
+        goal: {}
+        goal_default: {}
+        handles: {}
+        placeholder_keys: {}
+        result: {}
+        schema:
+          description: list的参数schema
+          properties:
+            feedback: {}
+            goal:
+              properties: {}
+              required: []
+              type: object
+            result: {}
+          required:
+          - goal
+          title: list参数
+          type: object
+        type: UniLabJsonCommand
       auto-pull_plunger:
         feedback: {}
         goal: {}
@@ -1216,7 +1261,10 @@ syringe_pump_with_valve.runze.SY03B-T08:
             goal:
               properties:
                 position:
-                  type: string
+                  anyOf:
+                  - type: integer
+                  - type: string
+                  - type: number
               required:
               - position
               type: object
@@ -1241,7 +1289,9 @@ syringe_pump_with_valve.runze.SY03B-T08:
             goal:
               properties:
                 velocity:
-                  type: string
+                  anyOf:
+                  - type: integer
+                  - type: string
               required:
               - velocity
               type: object
@@ -1301,13 +1351,13 @@ syringe_pump_with_valve.runze.SY03B-T08:
     status_types:
       max_velocity: float
       mode: int
-      plunger_position: String
+      plunger_position: ''
       position: float
       status: str
       valve_position: str
-      velocity_end: String
+      velocity_end: ''
-      velocity_grade: String
+      velocity_grade: ''
-      velocity_init: String
+      velocity_init: ''
     type: python
   config_info: []
   description: 润泽精密注射泵设备，集成阀门控制的高精度流体输送系统。该设备通过串口通信控制，支持多种运行模式和精确的体积控制。具备可变速度控制、精密定位、阀门切换、实时状态监控等功能。适用于微量液体输送、精密进样、流速控制、化学反应进料等需要高精度流体操作的实验室自动化应用。
@@ -1422,14 +1472,14 @@ syringe_pump_with_valve.runze.SY03B-T08:
         velocity_init:
           type: string
       required:
-      - status
-      - mode
       - max_velocity
+      - mode
+      - plunger_position
+      - position
+      - status
+      - valve_position
+      - velocity_end
       - velocity_grade
       - velocity_init
-      - velocity_end
-      - valve_position
-      - position
-      - plunger_position
       type: object
   version: 1.0.0

unilabos/registry/devices/reaction_station_bioyond.yaml

@@ -4,6 +4,78 @@ reaction_station.bioyond:
   - reaction_station_bioyond
   class:
     action_value_mappings:
+      add_time_constraint:
+        feedback: {}
+        goal:
+          duration: duration
+          end_point: end_point
+          end_step_key: end_step_key
+          start_point: start_point
+          start_step_key: start_step_key
+        goal_default:
+          duration: null
+          end_point: 0
+          end_step_key: ''
+          start_point: 0
+          start_step_key: ''
+        handles: {}
+        placeholder_keys: {}
+        result: {}
+        schema:
+          description: 添加时间约束 - 在两个工作流之间添加时间约束
+          properties:
+            feedback: {}
+            goal:
+              properties:
+                duration:
+                  description: 时间(秒)
+                  type: integer
+                end_point:
+                  default: 0
+                  description: 终点计时点 (Start=开始前, End=结束后)
+                  type: integer
+                end_step_key:
+                  default: ''
+                  description: 终点步骤Key (可选, 默认为空则自动选择)
+                  type: string
+                start_point:
+                  default: 0
+                  description: 起点计时点 (Start=开始前, End=结束后)
+                  type: integer
+                start_step_key:
+                  default: ''
+                  description: 起点步骤Key (例如 "feeding", "liquid", 可选, 默认为空则自动选择)
+                  type: string
+              required:
+              - duration
+              type: object
+            result: {}
+          required:
+          - goal
+          title: add_time_constraint参数
+          type: object
+        type: UniLabJsonCommand
+      auto-clear_workflows:
+        feedback: {}
+        goal: {}
+        goal_default: {}
+        handles: {}
+        placeholder_keys: {}
+        result: {}
+        schema:
+          description: ''
+          properties:
+            feedback: {}
+            goal:
+              properties: {}
+              required: []
+              type: object
+            result: {}
+          required:
+          - goal
+          title: clear_workflows参数
+          type: object
+        type: UniLabJsonCommand
       auto-create_order:
         feedback: {}
         goal: {}
@@ -23,7 +95,8 @@ reaction_station.bioyond:
               required:
               - json_str
               type: object
-            result: {}
+            result:
+              type: object
           required:
           - goal
           title: create_order参数
@@ -50,7 +123,8 @@ reaction_station.bioyond:
               required:
               - workflow_ids
               type: object
-            result: {}
+            result:
+              type: object
           required:
           - goal
           title: hard_delete_merged_workflows参数
@@ -75,7 +149,8 @@ reaction_station.bioyond:
               required:
               - json_str
               type: object
-            result: {}
+            result:
+              type: object
           required:
           - goal
           title: merge_workflow_with_parameters参数
@@ -100,7 +175,8 @@ reaction_station.bioyond:
               required:
               - report_request
               type: object
-            result: {}
+            result:
+              type: object
           required:
           - goal
           title: process_temperature_cutoff_report参数
@@ -125,12 +201,47 @@ reaction_station.bioyond:
               required:
               - web_workflow_json
               type: object
-            result: {}
+            result:
+              items:
+                additionalProperties:
+                  type: string
+                type: object
+              type: array
           required:
           - goal
           title: process_web_workflows参数
           type: object
         type: UniLabJsonCommand
+      auto-set_reactor_temperature:
+        feedback: {}
+        goal: {}
+        goal_default:
+          reactor_id: null
+          temperature: null
+        handles: {}
+        placeholder_keys: {}
+        result: {}
+        schema:
+          description: ''
+          properties:
+            feedback: {}
+            goal:
+              properties:
+                reactor_id:
+                  type: integer
+                temperature:
+                  type: number
+              required:
+              - reactor_id
+              - temperature
+              type: object
+            result:
+              type: string
+          required:
+          - goal
+          title: set_reactor_temperature参数
+          type: object
+        type: UniLabJsonCommand
       auto-skip_titration_steps:
         feedback: {}
         goal: {}
@@ -150,12 +261,35 @@ reaction_station.bioyond:
               required:
               - preintake_id
               type: object
-            result: {}
+            result:
+              type: object
           required:
           - goal
           title: skip_titration_steps参数
           type: object
         type: UniLabJsonCommand
+      auto-sync_workflow_sequence_from_bioyond:
+        feedback: {}
+        goal: {}
+        goal_default: {}
+        handles: {}
+        placeholder_keys: {}
+        result: {}
+        schema:
+          description: ''
+          properties:
+            feedback: {}
+            goal:
+              properties: {}
+              required: []
+              type: object
+            result:
+              type: object
+          required:
+          - goal
+          title: sync_workflow_sequence_from_bioyond参数
+          type: object
+        type: UniLabJsonCommand
       auto-wait_for_multiple_orders_and_get_reports:
         feedback: {}
         goal: {}
@@ -182,12 +316,40 @@ reaction_station.bioyond:
                   type: integer
               required: []
               type: object
-            result: {}
+            result:
+              type: object
           required:
           - goal
           title: wait_for_multiple_orders_and_get_reports参数
           type: object
         type: UniLabJsonCommand
+      auto-workflow_sequence:
+        feedback: {}
+        goal: {}
+        goal_default:
+          value: null
+        handles: {}
+        placeholder_keys: {}
+        result: {}
+        schema:
+          description: ''
+          properties:
+            feedback: {}
+            goal:
+              properties:
+                value:
+                  items:
+                    type: string
+                  type: array
+              required:
+              - value
+              type: object
+            result: {}
+          required:
+          - goal
+          title: workflow_sequence参数
+          type: object
+        type: UniLabJsonCommand
       auto-workflow_step_query:
         feedback: {}
         goal: {}
@@ -207,12 +369,35 @@ reaction_station.bioyond:
               required:
               - workflow_id
               type: object
-            result: {}
+            result:
+              type: object
           required:
           - goal
           title: workflow_step_query参数
           type: object
         type: UniLabJsonCommand
+      clean_all_server_workflows:
+        feedback: {}
+        goal: {}
+        goal_default: {}
+        handles: {}
+        placeholder_keys: {}
+        result: {}
+        schema:
+          description: 清空服务端所有非核心工作流 (保留核心流程)
+          properties:
+            feedback: {}
+            goal:
+              properties: {}
+              required: []
+              type: object
+            result:
+              type: object
+          required:
+          - goal
+          title: clean_all_server_workflows参数
+          type: object
+        type: UniLabJsonCommand
       drip_back:
         feedback: {}
         goal:
@@ -223,13 +408,14 @@ reaction_station.bioyond:
           torque_variation: torque_variation
           volume: volume
         goal_default:
-          assign_material_name: ''
+          assign_material_name: null
-          temperature: ''
+          temperature: 25.0
-          time: ''
+          time: '90'
-          titration_type: ''
+          titration_type: '1'
-          torque_variation: ''
+          torque_variation: 2
-          volume: ''
+          volume: null
         handles: {}
+        placeholder_keys: {}
         result: {}
         schema:
           description: 滴回去
@@ -241,27 +427,27 @@ reaction_station.bioyond:
                   description: 物料名称（不能为空）
                   type: string
                 temperature:
+                  default: 25.0
                   description: 温度设定(°C)
-                  type: string
+                  type: number
                 time:
+                  default: '90'
                   description: 观察时间(分钟)
                   type: string
                 titration_type:
-                  description: 是否滴定(1=否, 2=是)
+                  default: '1'
+                  description: 是否滴定(NO=否, YES=是)
                   type: string
                 torque_variation:
-                  description: 是否观察 (1=否, 2=是)
+                  default: 2
-                  type: string
+                  description: 是否观察 (NO=否, YES=是)
+                  type: integer
                 volume:
-                  description: 分液公式(μL)
+                  description: 分液公式(mL)
                   type: string
               required:
-              - volume
               - assign_material_name
-              - time
+              - volume
-              - torque_variation
-              - titration_type
-              - temperature
               type: object
             result: {}
           required:
@@ -274,7 +460,7 @@ reaction_station.bioyond:
         goal:
           batch_reports_result: batch_reports_result
         goal_default:
-          batch_reports_result: ''
+          batch_reports_result: null
         handles:
           input:
           - data_key: batch_reports_result
@@ -290,8 +476,8 @@ reaction_station.bioyond:
             handler_key: ACTUALS_EXTRACTED
             io_type: sink
             label: Extracted Actuals
-        result:
+        placeholder_keys: {}
-          return_info: return_info
+        result: {}
         schema:
           description: 从批量任务完成报告中提取每个订单的实际加料量，输出extracted列表。
           properties:
@@ -305,13 +491,6 @@ reaction_station.bioyond:
               - batch_reports_result
               type: object
             result:
-              properties:
-                return_info:
-                  description: JSON字符串，包含actuals数组，每项含order_code, order_id, actualTargetWeigh,
-                    actualVolume
-                  type: string
-              required:
-              - return_info
               title: extract_actuals_from_batch_reports结果
               type: object
           required:
@@ -329,13 +508,14 @@ reaction_station.bioyond:
           torque_variation: torque_variation
           volume: volume
         goal_default:
-          assign_material_name: ''
+          assign_material_name: BAPP
-          temperature: ''
+          temperature: 25.0
-          time: ''
+          time: '0'
-          titration_type: ''
+          titration_type: '1'
-          torque_variation: ''
+          torque_variation: 1
-          volume: ''
+          volume: '350'
         handles: {}
+        placeholder_keys: {}
         result: {}
         schema:
           description: 液体进料烧杯
@@ -344,30 +524,30 @@ reaction_station.bioyond:
             goal:
               properties:
                 assign_material_name:
+                  default: BAPP
                   description: 物料名称
                   type: string
                 temperature:
+                  default: 25.0
                   description: 温度设定(°C)
-                  type: string
+                  type: number
                 time:
+                  default: '0'
                   description: 观察时间(分钟)
                   type: string
                 titration_type:
-                  description: 是否滴定(1=否, 2=是)
+                  default: '1'
+                  description: 是否滴定(NO=否, YES=是)
                   type: string
                 torque_variation:
-                  description: 是否观察 (1=否, 2=是)
+                  default: 1
-                  type: string
+                  description: 是否观察 (NO=否, YES=是)
+                  type: integer
                 volume:
-                  description: 分液公式(μL)
+                  default: '350'
+                  description: 分液公式(mL)
                   type: string
-              required:
+              required: []
-              - volume
-              - assign_material_name
-              - time
-              - torque_variation
-              - titration_type
-              - temperature
               type: object
             result: {}
           required:
@@ -386,13 +566,13 @@ reaction_station.bioyond:
           torque_variation: torque_variation
           volume: volume
         goal_default:
-          assign_material_name: ''
+          assign_material_name: null
-          solvents: ''
+          solvents: null
-          temperature: '25.00'
+          temperature: 25.0
           time: '360'
           titration_type: '1'
-          torque_variation: '2'
+          torque_variation: 2
-          volume: ''
+          volume: null
         handles:
           input:
           - data_key: solvents
@@ -401,9 +581,10 @@ reaction_station.bioyond:
             handler_key: solvents
             io_type: source
             label: Solvents Data From Calculation Node
+        placeholder_keys: {}
         result: {}
         schema:
-          description: 液体投料-溶剂。可以直接提供volume(μL),或通过solvents对象自动从additional_solvent(mL)计算volume。
+          description: 液体投料-溶剂。可以直接提供volume(mL),或通过solvents对象自动从additional_solvent(mL)计算volume。
           properties:
             feedback: {}
             goal:
@@ -415,23 +596,23 @@ reaction_station.bioyond:
                   description: '溶剂信息对象(可选),包含: additional_solvent(溶剂体积mL), total_liquid_volume(总液体体积mL)。如果提供,将自动计算volume'
                   type: string
                 temperature:
-                  default: '25.00'
+                  default: 25.0
                   description: 温度设定(°C),默认25.00
-                  type: string
+                  type: number
                 time:
                   default: '360'
                   description: 观察时间(分钟),默认360
                   type: string
                 titration_type:
                   default: '1'
-                  description: 是否滴定(1=否, 2=是),默认1
+                  description: 是否滴定(NO=否, YES=是),默认NO
                   type: string
                 torque_variation:
-                  default: '2'
+                  default: 2
-                  description: 是否观察 (1=否, 2=是),默认2
+                  description: 是否观察 (NO=否, YES=是),默认YES
-                  type: string
+                  type: integer
                 volume:
-                  description: 分液量(μL)。可直接提供,或通过solvents参数自动计算
+                  description: 分液量(mL)。可直接提供,或通过solvents参数自动计算
                   type: string
               required:
               - assign_material_name
@@ -455,15 +636,15 @@ reaction_station.bioyond:
           volume_formula: volume_formula
           x_value: x_value
         goal_default:
-          assign_material_name: ''
+          assign_material_name: null
-          extracted_actuals: ''
+          extracted_actuals: null
-          feeding_order_data: ''
+          feeding_order_data: null
-          temperature: '25.00'
+          temperature: 25.0
           time: '90'
           titration_type: '2'
-          torque_variation: '2'
+          torque_variation: 2
-          volume_formula: ''
+          volume_formula: null
-          x_value: ''
+          x_value: null
         handles:
           input:
           - data_key: extracted_actuals
@@ -478,6 +659,7 @@ reaction_station.bioyond:
             handler_key: feeding_order
             io_type: source
             label: Feeding Order Data From Calculation Node
+        placeholder_keys: {}
         result: {}
         schema:
           description: 液体进料(滴定)。支持两种模式:1)直接提供volume_formula;2)自动计算-提供x_value+feeding_order_data+extracted_actuals,系统自动生成公式"1000*(m二酐-x)*V二酐滴定/m二酐滴定"
@@ -496,23 +678,23 @@ reaction_station.bioyond:
                     {"feeding_order": [{"type": "main_anhydride", "amount": 1.915}]}'
                   type: string
                 temperature:
-                  default: '25.00'
+                  default: 25.0
                   description: 温度设定(°C),默认25.00
-                  type: string
+                  type: number
                 time:
                   default: '90'
                   description: 观察时间(分钟),默认90
                   type: string
                 titration_type:
                   default: '2'
-                  description: 是否滴定(1=否, 2=是),默认2
+                  description: 是否滴定(NO=否, YES=是),默认YES
                   type: string
                 torque_variation:
-                  default: '2'
+                  default: 2
-                  description: 是否观察 (1=否, 2=是),默认2
+                  description: 是否观察 (NO=否, YES=是),默认YES
-                  type: string
+                  type: integer
                 volume_formula:
-                  description: 分液公式(μL)。可直接提供固定公式,或留空由系统根据x_value、feeding_order_data、extracted_actuals自动生成
+                  description: 分液公式(mL)。可直接提供固定公式,或留空由系统根据x_value、feeding_order_data、extracted_actuals自动生成
                   type: string
                 x_value:
                   description: 公式中的x值,手工输入,格式为"{{1-2-3}}"(包含双花括号)。用于自动公式计算
@@ -536,13 +718,14 @@ reaction_station.bioyond:
           torque_variation: torque_variation
           volume_formula: volume_formula
         goal_default:
-          assign_material_name: ''
+          assign_material_name: null
-          temperature: ''
+          temperature: 25.0
-          time: ''
+          time: '0'
-          titration_type: ''
+          titration_type: '1'
-          torque_variation: ''
+          torque_variation: 1
-          volume_formula: ''
+          volume_formula: null
         handles: {}
+        placeholder_keys: {}
         result: {}
         schema:
           description: 液体进料小瓶(非滴定)
@@ -554,27 +737,27 @@ reaction_station.bioyond:
                   description: 物料名称
                   type: string
                 temperature:
+                  default: 25.0
                   description: 温度设定(°C)
-                  type: string
+                  type: number
                 time:
+                  default: '0'
                   description: 观察时间(分钟)
                   type: string
                 titration_type:
-                  description: 是否滴定(1=否, 2=是)
+                  default: '1'
+                  description: 是否滴定(NO=否, YES=是)
                   type: string
                 torque_variation:
-                  description: 是否观察 (1=否, 2=是)
+                  default: 1
-                  type: string
+                  description: 是否观察 (NO=否, YES=是)
+                  type: integer
                 volume_formula:
-                  description: 分液公式(μL)
+                  description: 分液公式(mL)
                   type: string
               required:
               - volume_formula
               - assign_material_name
-              - time
-              - torque_variation
-              - titration_type
-              - temperature
               type: object
             result: {}
           required:
@@ -588,9 +771,10 @@ reaction_station.bioyond:
           task_name: task_name
           workflow_name: workflow_name
         goal_default:
-          task_name: ''
+          task_name: null
-          workflow_name: ''
+          workflow_name: null
         handles: {}
+        placeholder_keys: {}
         result: {}
         schema:
           description: 处理并执行工作流
@@ -608,7 +792,8 @@ reaction_station.bioyond:
               - workflow_name
               - task_name
               type: object
-            result: {}
+            result:
+              type: object
           required:
           - goal
           title: process_and_execute_workflow参数
@@ -621,10 +806,11 @@ reaction_station.bioyond:
           cutoff: cutoff
           temperature: temperature
         goal_default:
-          assign_material_name: ''
+          assign_material_name: null
-          cutoff: ''
+          cutoff: '900000'
-          temperature: ''
+          temperature: -10.0
         handles: {}
+        placeholder_keys: {}
         result: {}
         schema:
           description: 反应器放入 - 将反应器放入工作站，配置物料名称、粘度上限和温度参数
@@ -636,14 +822,14 @@ reaction_station.bioyond:
                   description: 物料名称
                   type: string
                 cutoff:
+                  default: '900000'
                   description: 粘度上限
                   type: string
                 temperature:
+                  default: -10.0
                   description: 温度设定(°C)
-                  type: string
+                  type: number
               required:
-              - cutoff
-              - temperature
               - assign_material_name
               type: object
             result: {}
@@ -657,6 +843,7 @@ reaction_station.bioyond:
         goal: {}
         goal_default: {}
         handles: {}
+        placeholder_keys: {}
         result: {}
         schema:
           description: 反应器取出 - 从工作站中取出反应器，无需参数的简单操作
@@ -666,20 +853,35 @@ reaction_station.bioyond:
               properties: {}
               required: []
               type: object
-            result:
+            result: {}
-              properties:
-                code:
-                  description: 操作结果代码(1表示成功,0表示失败)
-                  type: integer
-                return_info:
-                  description: 操作结果详细信息
-                  type: string
-              type: object
           required:
           - goal
           title: reactor_taken_out参数
           type: object
         type: UniLabJsonCommand
+      scheduler_start:
+        feedback: {}
+        goal: {}
+        goal_default: {}
+        handles: {}
+        placeholder_keys: {}
+        result: {}
+        schema:
+          description: 启动调度器 - 启动Bioyond工作站的任务调度器，开始执行队列中的任务
+          properties:
+            feedback: {}
+            goal:
+              properties: {}
+              required: []
+              type: object
+            result:
+              title: scheduler_start结果
+              type: object
+          required:
+          - goal
+          title: scheduler_start参数
+          type: object
+        type: UniLabJsonCommand
       solid_feeding_vials:
         feedback: {}
         goal:
@@ -689,12 +891,13 @@ reaction_station.bioyond:
           time: time
           torque_variation: torque_variation
         goal_default:
-          assign_material_name: ''
+          assign_material_name: null
-          material_id: ''
+          material_id: null
-          temperature: ''
+          temperature: 25.0
-          time: ''
+          time: '0'
-          torque_variation: ''
+          torque_variation: 1
         handles: {}
+        placeholder_keys: {}
         result: {}
         schema:
           description: 固体进料小瓶 - 通过小瓶向反应器中添加固体物料，支持多种粉末类型(盐、面粉、BTDA)
@@ -706,23 +909,22 @@ reaction_station.bioyond:
                   description: 物料名称(用于获取试剂瓶位ID)
                   type: string
                 material_id:
-                  description: 粉末类型ID，1=盐（21分钟），2=面粉（27分钟），3=BTDA（38分钟）
+                  description: 粉末类型ID，Salt=盐（21分钟），Flour=面粉（27分钟），BTDA=BTDA（38分钟）
                   type: string
                 temperature:
+                  default: 25.0
                   description: 温度设定(°C)
-                  type: string
+                  type: number
                 time:
+                  default: '0'
                   description: 观察时间(分钟)
                   type: string
                 torque_variation:
-                  description: 是否观察 (1=否, 2=是)
+                  default: 1
-                  type: string
+                  description: 是否观察 (NO=否, YES=是)
+                  type: integer
               required:
-              - assign_material_name
               - material_id
-              - time
-              - torque_variation
-              - temperature
               type: object
             result: {}
           required:
@@ -730,10 +932,10 @@ reaction_station.bioyond:
           title: solid_feeding_vials参数
           type: object
         type: UniLabJsonCommand
-    module: unilabos.devices.workstation.bioyond_studio.reaction_station:BioyondReactionStation
+    module: unilabos.devices.workstation.bioyond_studio.reaction_station.reaction_station:BioyondReactionStation
     protocol_type: []
     status_types:
-      workflow_sequence: String
+      workflow_sequence: str
     type: python
   config_info: []
   description: Bioyond反应站
@@ -753,9 +955,7 @@ reaction_station.bioyond:
     data:
       properties:
         workflow_sequence:
-          items:
           type: string
-          type: array
       required:
       - workflow_sequence
       type: object
@@ -791,7 +991,7 @@ reaction_station.reactor:
           title: update_metrics参数
           type: object
         type: UniLabJsonCommand
-    module: unilabos.devices.workstation.bioyond_studio.reaction_station:BioyondReactor
+    module: unilabos.devices.workstation.bioyond_studio.reaction_station.reaction_station:BioyondReactor
     status_types: {}
     type: python
   config_info: []

unilabos/registry/devices/robot_agv.yaml

@@ -37,42 +37,41 @@ agv.SEER:
           type: object
         type: UniLabJsonCommand
       send_nav_task:
-        feedback: {}
+        feedback:
+          status: status
         goal:
           command: command
         goal_default:
           command: ''
         handles: {}
+        placeholder_keys: {}
         result:
+          return_info: return_info
           success: success
         schema:
           description: ''
           properties:
             feedback:
+              additionalProperties: false
               properties:
                 status:
                   type: string
-              required:
-              - status
               title: SendCmd_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 command:
                   type: string
-              required:
-              - command
               title: SendCmd_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
                 success:
                   type: boolean
-              required:
-              - return_info
-              - success
               title: SendCmd_Result
               type: object
           required:

unilabos/registry/devices/robot_arm.yaml

@@ -122,31 +122,6 @@ robotic_arm.SCARA_with_slider.moveit.virtual:
           title: moveit_task参数
           type: object
         type: UniLabJsonCommand
-      auto-post_init:
-        feedback: {}
-        goal: {}
-        goal_default:
-          ros_node: null
-        handles: {}
-        placeholder_keys: {}
-        result: {}
-        schema:
-          description: post_init的参数schema
-          properties:
-            feedback: {}
-            goal:
-              properties:
-                ros_node:
-                  type: object
-              required:
-              - ros_node
-              type: object
-            result: {}
-          required:
-          - goal
-          title: post_init参数
-          type: object
-        type: UniLabJsonCommand
       auto-resource_manager:
         feedback: {}
         goal: {}
@@ -198,41 +173,41 @@ robotic_arm.SCARA_with_slider.moveit.virtual:
           type: object
         type: UniLabJsonCommand
       pick_and_place:
-        feedback: {}
+        feedback:
+          status: status
         goal:
           command: command
         goal_default:
           command: ''
         handles: {}
-        result: {}
+        placeholder_keys: {}
+        result:
+          return_info: return_info
+          success: success
         schema:
           description: ''
           properties:
             feedback:
+              additionalProperties: false
               properties:
                 status:
                   type: string
-              required:
-              - status
               title: SendCmd_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 command:
                   type: string
-              required:
-              - command
               title: SendCmd_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
                 success:
                   type: boolean
-              required:
-              - return_info
-              - success
               title: SendCmd_Result
               type: object
           required:
@@ -241,41 +216,41 @@ robotic_arm.SCARA_with_slider.moveit.virtual:
           type: object
         type: SendCmd
       set_position:
-        feedback: {}
+        feedback:
+          status: status
         goal:
           command: command
         goal_default:
           command: ''
         handles: {}
-        result: {}
+        placeholder_keys: {}
+        result:
+          return_info: return_info
+          success: success
         schema:
           description: ''
           properties:
             feedback:
+              additionalProperties: false
               properties:
                 status:
                   type: string
-              required:
-              - status
               title: SendCmd_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 command:
                   type: string
-              required:
-              - command
               title: SendCmd_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
                 success:
                   type: boolean
-              required:
-              - return_info
-              - success
               title: SendCmd_Result
               type: object
           required:
@@ -284,41 +259,41 @@ robotic_arm.SCARA_with_slider.moveit.virtual:
           type: object
         type: SendCmd
       set_status:
-        feedback: {}
+        feedback:
+          status: status
         goal:
           command: command
         goal_default:
           command: ''
         handles: {}
-        result: {}
+        placeholder_keys: {}
+        result:
+          return_info: return_info
+          success: success
         schema:
           description: ''
           properties:
             feedback:
+              additionalProperties: false
               properties:
                 status:
                   type: string
-              required:
-              - status
               title: SendCmd_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 command:
                   type: string
-              required:
-              - command
               title: SendCmd_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
                 success:
                   type: boolean
-              required:
-              - return_info
-              - success
               title: SendCmd_Result
               type: object
           required:
@@ -455,42 +430,41 @@ robotic_arm.UR:
           type: object
         type: UniLabJsonCommand
       move_pos_task:
-        feedback: {}
+        feedback:
+          status: status
         goal:
           command: command
         goal_default:
           command: ''
         handles: {}
+        placeholder_keys: {}
         result:
+          return_info: return_info
           success: success
         schema:
           description: ''
           properties:
             feedback:
+              additionalProperties: false
               properties:
                 status:
                   type: string
-              required:
-              - status
               title: SendCmd_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 command:
                   type: string
-              required:
-              - command
               title: SendCmd_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
                 success:
                   type: boolean
-              required:
-              - return_info
-              - success
               title: SendCmd_Result
               type: object
           required:
@@ -532,8 +506,8 @@ robotic_arm.UR:
           type: string
       required:
       - arm_pose
-      - gripper_pose
       - arm_status
+      - gripper_pose
       - gripper_status
       type: object
   version: 1.0.0
@@ -726,41 +700,41 @@ robotic_arm.elite:
           type: object
         type: UniLabJsonCommand
       modbus_task_cmd:
-        feedback: {}
+        feedback:
+          status: status
         goal:
           command: command
         goal_default:
           command: ''
         handles: {}
-        result: {}
+        placeholder_keys: {}
+        result:
+          return_info: return_info
+          success: success
         schema:
           description: ''
           properties:
             feedback:
+              additionalProperties: false
               properties:
                 status:
                   type: string
-              required:
-              - status
               title: SendCmd_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 command:
                   type: string
-              required:
-              - command
               title: SendCmd_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
                 success:
                   type: boolean
-              required:
-              - return_info
-              - success
               title: SendCmd_Result
               type: object
           required:
@@ -770,8 +744,8 @@ robotic_arm.elite:
         type: SendCmd
     module: unilabos.devices.arm.elite_robot:EliteRobot
     status_types:
-      actual_joint_positions: String
+      actual_joint_positions: ''
-      arm_pose: String
+      arm_pose: list[float]
     type: python
   config_info: []
   description: Elite robot arm
@@ -797,8 +771,8 @@ robotic_arm.elite:
             type: number
           type: array
       required:
-      - arm_pose
       - actual_joint_positions
+      - arm_pose
       type: object
   model:
     mesh: elite_robot

unilabos/registry/devices/robot_gripper.yaml

@@ -114,11 +114,12 @@ gripper.misumi_rz:
             goal:
               properties:
                 data:
-                  type: string
+                  type: object
               required:
               - data
               type: object
-            result: {}
+            result:
+              type: object
           required:
           - goal
           title: modbus_crc参数
@@ -398,30 +399,26 @@ gripper.misumi_rz:
           description: ''
           properties:
             feedback:
+              additionalProperties: false
               properties:
                 status:
                   type: string
-              required:
-              - status
               title: SendCmd_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 command:
                   type: string
-              required:
-              - command
               title: SendCmd_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
                 success:
                   type: boolean
-              required:
-              - return_info
-              - success
               title: SendCmd_Result
               type: object
           required:
@@ -504,71 +501,82 @@ gripper.mock:
         type: UniLabJsonCommand
       push_to:
         feedback:
-          effort: torque
+          effort: effort
           position: position
+          reached_goal: reached_goal
+          stalled: stalled
         goal:
-          command.max_effort: torque
+          command: command
-          command.position: position
+          position: position
+          torque: torque
+          velocity: velocity
         goal_default:
           command:
             max_effort: 0.0
             position: 0.0
         handles: {}
+        placeholder_keys: {}
         result:
-          effort: torque
+          effort: effort
           position: position
+          reached_goal: reached_goal
+          stalled: stalled
         schema:
           description: ''
           properties:
             feedback:
+              additionalProperties: false
               properties:
                 effort:
+                  maximum: 1.7976931348623157e+308
+                  minimum: -1.7976931348623157e+308
                   type: number
                 position:
+                  maximum: 1.7976931348623157e+308
+                  minimum: -1.7976931348623157e+308
                   type: number
                 reached_goal:
                   type: boolean
                 stalled:
                   type: boolean
-              required:
-              - position
-              - effort
-              - stalled
-              - reached_goal
               title: GripperCommand_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 command:
+                  additionalProperties: false
                   properties:
                     max_effort:
+                      maximum: 1.7976931348623157e+308
+                      minimum: -1.7976931348623157e+308
                       type: number
                     position:
+                      maximum: 1.7976931348623157e+308
+                      minimum: -1.7976931348623157e+308
                       type: number
                   required:
                   - position
                   - max_effort
                   title: command
                   type: object
-              required:
-              - command
               title: GripperCommand_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 effort:
+                  maximum: 1.7976931348623157e+308
+                  minimum: -1.7976931348623157e+308
                   type: number
                 position:
+                  maximum: 1.7976931348623157e+308
+                  minimum: -1.7976931348623157e+308
                   type: number
                 reached_goal:
                   type: boolean
                 stalled:
                   type: boolean
-              required:
-              - position
-              - effort
-              - stalled
-              - reached_goal
               title: GripperCommand_Result
               type: object
           required:
@@ -604,8 +612,8 @@ gripper.mock:
           type: number
       required:
       - position
-      - velocity
-      - torque
       - status
+      - torque
+      - velocity
       type: object
   version: 1.0.0

unilabos/registry/devices/robot_linear_motion.yaml

@@ -24,6 +24,27 @@ linear_motion.grbl:
           title: initialize参数
           type: object
         type: UniLabJsonCommand
+      auto-list:
+        feedback: {}
+        goal: {}
+        goal_default: {}
+        handles: {}
+        placeholder_keys: {}
+        result: {}
+        schema:
+          description: list的参数schema
+          properties:
+            feedback: {}
+            goal:
+              properties: {}
+              required: []
+              type: object
+            result: {}
+          required:
+          - goal
+          title: list参数
+          type: object
+        type: UniLabJsonCommand
       auto-set_position:
         feedback: {}
         goal: {}
@@ -93,44 +114,39 @@ linear_motion.grbl:
         type: UniLabJsonCommandAsync
       move_through_points:
         feedback:
-          current_pose.pose.position: position
+          current_pose: current_pose
-          estimated_time_remaining.sec: time_remaining
+          distance_remaining: distance_remaining
-          navigation_time.sec: time_spent
+          estimated_time_remaining: estimated_time_remaining
-          number_of_poses_remaining: pose_number_remaining
+          navigation_time: navigation_time
+          number_of_poses_remaining: number_of_poses_remaining
+          number_of_recoveries: number_of_recoveries
         goal:
-          poses[].pose.position: positions[]
+          behavior_tree: behavior_tree
+          poses: poses
+          positions: positions
         goal_default:
           behavior_tree: ''
-          poses:
+          poses: []
-          - header:
-              frame_id: ''
-              stamp:
-                nanosec: 0
-                sec: 0
-            pose:
-              orientation:
-                w: 1.0
-                x: 0.0
-                y: 0.0
-                z: 0.0
-              position:
-                x: 0.0
-                y: 0.0
-                z: 0.0
         handles: {}
-        result: {}
+        placeholder_keys: {}
+        result:
+          result: result
         schema:
           description: ''
           properties:
             feedback:
+              additionalProperties: false
               properties:
                 current_pose:
+                  additionalProperties: false
                   properties:
                     header:
+                      additionalProperties: false
                       properties:
                         frame_id:
                           type: string
                         stamp:
+                          additionalProperties: false
                           properties:
                             nanosec:
                               maximum: 4294967295
@@ -151,16 +167,26 @@ linear_motion.grbl:
                       title: header
                       type: object
                     pose:
+                      additionalProperties: false
                       properties:
                         orientation:
+                          additionalProperties: false
                           properties:
                             w:
+                              maximum: 1.7976931348623157e+308
+                              minimum: -1.7976931348623157e+308
                               type: number
                             x:
+                              maximum: 1.7976931348623157e+308
+                              minimum: -1.7976931348623157e+308
                               type: number
                             y:
+                              maximum: 1.7976931348623157e+308
+                              minimum: -1.7976931348623157e+308
                               type: number
                             z:
+                              maximum: 1.7976931348623157e+308
+                              minimum: -1.7976931348623157e+308
                               type: number
                           required:
                           - x
@@ -170,12 +196,19 @@ linear_motion.grbl:
                           title: orientation
                           type: object
                         position:
+                          additionalProperties: false
                           properties:
                             x:
+                              maximum: 1.7976931348623157e+308
+                              minimum: -1.7976931348623157e+308
                               type: number
                             y:
+                              maximum: 1.7976931348623157e+308
+                              minimum: -1.7976931348623157e+308
                               type: number
                             z:
+                              maximum: 1.7976931348623157e+308
+                              minimum: -1.7976931348623157e+308
                               type: number
                           required:
                           - x
@@ -194,8 +227,11 @@ linear_motion.grbl:
                   title: current_pose
                   type: object
                 distance_remaining:
+                  maximum: 3.4028235e+38
+                  minimum: -3.4028235e+38
                   type: number
                 estimated_time_remaining:
+                  additionalProperties: false
                   properties:
                     nanosec:
                       maximum: 4294967295
@@ -211,6 +247,7 @@ linear_motion.grbl:
                   title: estimated_time_remaining
                   type: object
                 navigation_time:
+                  additionalProperties: false
                   properties:
                     nanosec:
                       maximum: 4294967295
@@ -233,16 +270,10 @@ linear_motion.grbl:
                   maximum: 32767
                   minimum: -32768
                   type: integer
-              required:
-              - current_pose
-              - navigation_time
-              - estimated_time_remaining
-              - number_of_recoveries
-              - distance_remaining
-              - number_of_poses_remaining
               title: NavigateThroughPoses_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 behavior_tree:
                   type: string
@@ -256,12 +287,8 @@ linear_motion.grbl:
                           stamp:
                             properties:
                               nanosec:
-                                maximum: 4294967295
-                                minimum: 0
                                 type: integer
                               sec:
-                                maximum: 2147483647
-                                minimum: -2147483648
                                 type: integer
                             required:
                             - sec
@@ -314,23 +341,17 @@ linear_motion.grbl:
                     required:
                     - header
                     - pose
-                    title: poses
                     type: object
                   type: array
-              required:
-              - poses
-              - behavior_tree
               title: NavigateThroughPoses_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 result:
-                  properties: {}
+                  additionalProperties: true
-                  required: []
                   title: result
                   type: object
-              required:
-              - result
               title: NavigateThroughPoses_Result
               type: object
           required:
@@ -340,9 +361,15 @@ linear_motion.grbl:
         type: NavigateThroughPoses
       set_spindle_speed:
         feedback:
-          position: spindle_speed
+          error: error
+          header: header
+          position: position
+          velocity: velocity
         goal:
-          position: spindle_speed
+          max_velocity: max_velocity
+          min_duration: min_duration
+          position: position
+          spindle_speed: spindle_speed
         goal_default:
           max_velocity: 0.0
           min_duration:
@@ -350,19 +377,25 @@ linear_motion.grbl:
             sec: 0
           position: 0.0
         handles: {}
+        placeholder_keys: {}
         result: {}
         schema:
           description: ''
           properties:
             feedback:
+              additionalProperties: false
               properties:
                 error:
+                  maximum: 1.7976931348623157e+308
+                  minimum: -1.7976931348623157e+308
                   type: number
                 header:
+                  additionalProperties: false
                   properties:
                     frame_id:
                       type: string
                     stamp:
+                      additionalProperties: false
                       properties:
                         nanosec:
                           maximum: 4294967295
@@ -383,21 +416,24 @@ linear_motion.grbl:
                   title: header
                   type: object
                 position:
+                  maximum: 1.7976931348623157e+308
+                  minimum: -1.7976931348623157e+308
                   type: number
                 velocity:
+                  maximum: 1.7976931348623157e+308
+                  minimum: -1.7976931348623157e+308
                   type: number
-              required:
-              - header
-              - position
-              - velocity
-              - error
               title: SingleJointPosition_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 max_velocity:
+                  maximum: 1.7976931348623157e+308
+                  minimum: -1.7976931348623157e+308
                   type: number
                 min_duration:
+                  additionalProperties: false
                   properties:
                     nanosec:
                       maximum: 4294967295
@@ -413,16 +449,13 @@ linear_motion.grbl:
                   title: min_duration
                   type: object
                 position:
+                  maximum: 1.7976931348623157e+308
+                  minimum: -1.7976931348623157e+308
                   type: number
-              required:
-              - position
-              - min_duration
-              - max_velocity
               title: SingleJointPosition_Goal
               type: object
             result:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: SingleJointPosition_Result
               type: object
           required:
@@ -432,7 +465,7 @@ linear_motion.grbl:
         type: SingleJointPosition
     module: unilabos.devices.cnc.grbl_sync:GrblCNC
     status_types:
-      position: unilabos.messages:Point3D
+      position: Point3D
       spindle_speed: float
       status: str
     type: python
@@ -471,9 +504,9 @@ linear_motion.grbl:
         status:
           type: string
       required:
-      - status
       - position
       - spindle_speed
+      - status
       type: object
   version: 1.0.0
 linear_motion.toyo_xyz.sim:
@@ -600,31 +633,6 @@ linear_motion.toyo_xyz.sim:
           title: moveit_task参数
           type: object
         type: UniLabJsonCommand
-      auto-post_init:
-        feedback: {}
-        goal: {}
-        goal_default:
-          ros_node: null
-        handles: {}
-        placeholder_keys: {}
-        result: {}
-        schema:
-          description: post_init的参数schema
-          properties:
-            feedback: {}
-            goal:
-              properties:
-                ros_node:
-                  type: object
-              required:
-              - ros_node
-              type: object
-            result: {}
-          required:
-          - goal
-          title: post_init参数
-          type: object
-        type: UniLabJsonCommand
       auto-resource_manager:
         feedback: {}
         goal: {}
@@ -676,41 +684,41 @@ linear_motion.toyo_xyz.sim:
           type: object
         type: UniLabJsonCommand
       pick_and_place:
-        feedback: {}
+        feedback:
+          status: status
         goal:
           command: command
         goal_default:
           command: ''
         handles: {}
-        result: {}
+        placeholder_keys: {}
+        result:
+          return_info: return_info
+          success: success
         schema:
           description: ''
           properties:
             feedback:
+              additionalProperties: false
               properties:
                 status:
                   type: string
-              required:
-              - status
               title: SendCmd_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 command:
                   type: string
-              required:
-              - command
               title: SendCmd_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
                 success:
                   type: boolean
-              required:
-              - return_info
-              - success
               title: SendCmd_Result
               type: object
           required:
@@ -719,41 +727,41 @@ linear_motion.toyo_xyz.sim:
           type: object
         type: SendCmd
       set_position:
-        feedback: {}
+        feedback:
+          status: status
         goal:
           command: command
         goal_default:
           command: ''
         handles: {}
-        result: {}
+        placeholder_keys: {}
+        result:
+          return_info: return_info
+          success: success
         schema:
           description: ''
           properties:
             feedback:
+              additionalProperties: false
               properties:
                 status:
                   type: string
-              required:
-              - status
               title: SendCmd_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 command:
                   type: string
-              required:
-              - command
               title: SendCmd_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
                 success:
                   type: boolean
-              required:
-              - return_info
-              - success
               title: SendCmd_Result
               type: object
           required:
@@ -762,41 +770,41 @@ linear_motion.toyo_xyz.sim:
           type: object
         type: SendCmd
       set_status:
-        feedback: {}
+        feedback:
+          status: status
         goal:
           command: command
         goal_default:
           command: ''
         handles: {}
-        result: {}
+        placeholder_keys: {}
+        result:
+          return_info: return_info
+          success: success
         schema:
           description: ''
           properties:
             feedback:
+              additionalProperties: false
               properties:
                 status:
                   type: string
-              required:
-              - status
               title: SendCmd_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 command:
                   type: string
-              required:
-              - command
               title: SendCmd_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
                 success:
                   type: boolean
-              required:
-              - return_info
-              - success
               title: SendCmd_Result
               type: object
           required:
@@ -939,30 +947,26 @@ motor.iCL42:
           description: ''
           properties:
             feedback:
+              additionalProperties: false
               properties:
                 status:
                   type: string
-              required:
-              - status
               title: SendCmd_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 command:
                   type: string
-              required:
-              - command
               title: SendCmd_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
                 success:
                   type: boolean
-              required:
-              - return_info
-              - success
               title: SendCmd_Result
               type: object
           required:
@@ -1000,8 +1004,8 @@ motor.iCL42:
         success:
           type: boolean
       required:
-      - motor_position
       - is_executing_run
+      - motor_position
       - success
       type: object
   version: 1.0.0

unilabos/registry/devices/solid_dispenser.yaml

@@ -14,19 +14,24 @@ solid_dispenser.laiyu:
           powder_tube_number: 0
           target_tube_position: ''
         handles: {}
+        placeholder_keys: {}
         result:
           actual_mass_mg: actual_mass_mg
+          return_info: return_info
+          success: success
         schema:
           description: ''
           properties:
             feedback:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: SolidDispenseAddPowderTube_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 compound_mass:
+                  maximum: 1.7976931348623157e+308
+                  minimum: -1.7976931348623157e+308
                   type: number
                 powder_tube_number:
                   maximum: 2147483647
@@ -34,24 +39,19 @@ solid_dispenser.laiyu:
                   type: integer
                 target_tube_position:
                   type: string
-              required:
-              - powder_tube_number
-              - target_tube_position
-              - compound_mass
               title: SolidDispenseAddPowderTube_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 actual_mass_mg:
+                  maximum: 1.7976931348623157e+308
+                  minimum: -1.7976931348623157e+308
                   type: number
                 return_info:
                   type: string
                 success:
                   type: boolean
-              required:
-              - return_info
-              - actual_mass_mg
-              - success
               title: SolidDispenseAddPowderTube_Result
               type: object
           required:
@@ -74,11 +74,12 @@ solid_dispenser.laiyu:
             goal:
               properties:
                 data:
-                  type: string
+                  type: object
               required:
               - data
               type: object
-            result: {}
+            result:
+              type: object
           required:
           - goal
           title: calculate_crc参数
@@ -99,11 +100,12 @@ solid_dispenser.laiyu:
             goal:
               properties:
                 command:
-                  type: string
+                  type: object
               required:
               - command
               type: object
-            result: {}
+            result:
+              type: object
           required:
           - goal
           title: send_command参数
@@ -112,36 +114,37 @@ solid_dispenser.laiyu:
       discharge:
         feedback: {}
         goal:
-          float_input: float_input
+          float_in: float_in
         goal_default:
           float_in: 0.0
         handles: {}
-        result: {}
+        placeholder_keys: {}
+        result:
+          return_info: return_info
+          success: success
         schema:
           description: ''
           properties:
             feedback:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: FloatSingleInput_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 float_in:
+                  maximum: 1.7976931348623157e+308
+                  minimum: -1.7976931348623157e+308
                   type: number
-              required:
-              - float_in
               title: FloatSingleInput_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
                 success:
                   type: boolean
-              required:
-              - return_info
-              - success
               title: FloatSingleInput_Result
               type: object
           required:
@@ -156,32 +159,31 @@ solid_dispenser.laiyu:
         goal_default:
           string: ''
         handles: {}
-        result: {}
+        placeholder_keys: {}
+        result:
+          return_info: return_info
+          success: success
         schema:
           description: ''
           properties:
             feedback:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: StrSingleInput_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 string:
                   type: string
-              required:
-              - string
               title: StrSingleInput_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
                 success:
                   type: boolean
-              required:
-              - return_info
-              - success
               title: StrSingleInput_Result
               type: object
           required:
@@ -200,38 +202,41 @@ solid_dispenser.laiyu:
           y: 0.0
           z: 0.0
         handles: {}
-        result: {}
+        placeholder_keys: {}
+        result:
+          return_info: return_info
+          success: success
         schema:
           description: ''
           properties:
             feedback:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: Point3DSeparateInput_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 x:
+                  maximum: 1.7976931348623157e+308
+                  minimum: -1.7976931348623157e+308
                   type: number
                 y:
+                  maximum: 1.7976931348623157e+308
+                  minimum: -1.7976931348623157e+308
                   type: number
                 z:
+                  maximum: 1.7976931348623157e+308
+                  minimum: -1.7976931348623157e+308
                   type: number
-              required:
-              - x
-              - y
-              - z
               title: Point3DSeparateInput_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
                 success:
                   type: boolean
-              required:
-              - return_info
-              - success
               title: Point3DSeparateInput_Result
               type: object
           required:
@@ -246,34 +251,33 @@ solid_dispenser.laiyu:
         goal_default:
           int_input: 0
         handles: {}
-        result: {}
+        placeholder_keys: {}
+        result:
+          return_info: return_info
+          success: success
         schema:
           description: ''
           properties:
             feedback:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: IntSingleInput_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 int_input:
                   maximum: 2147483647
                   minimum: -2147483648
                   type: integer
-              required:
-              - int_input
               title: IntSingleInput_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
                 success:
                   type: boolean
-              required:
-              - return_info
-              - success
               title: IntSingleInput_Result
               type: object
           required:
@@ -288,34 +292,33 @@ solid_dispenser.laiyu:
         goal_default:
           int_input: 0
         handles: {}
-        result: {}
+        placeholder_keys: {}
+        result:
+          return_info: return_info
+          success: success
         schema:
           description: ''
           properties:
             feedback:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: IntSingleInput_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 int_input:
                   maximum: 2147483647
                   minimum: -2147483648
                   type: integer
-              required:
-              - int_input
               title: IntSingleInput_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
                 success:
                   type: boolean
-              required:
-              - return_info
-              - success
               title: IntSingleInput_Result
               type: object
           required:
@@ -328,26 +331,25 @@ solid_dispenser.laiyu:
         goal: {}
         goal_default: {}
         handles: {}
-        result: {}
+        placeholder_keys: {}
+        result:
+          return_info: return_info
         schema:
           description: ''
           properties:
             feedback:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: EmptyIn_Feedback
               type: object
             goal:
-              properties: {}
+              additionalProperties: true
-              required: []
               title: EmptyIn_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
-              required:
-              - return_info
               title: EmptyIn_Result
               type: object
           required:

unilabos/registry/devices/temperature.yaml

@@ -34,7 +34,8 @@ chiller:
               - register_address
               - value
               type: object
-            result: {}
+            result:
+              type: object
           required:
           - goal
           title: build_modbus_frame参数
@@ -63,7 +64,8 @@ chiller:
               required:
               - temperature
               type: object
-            result: {}
+            result:
+              type: integer
           required:
           - goal
           title: convert_temperature_to_modbus_value参数
@@ -84,11 +86,12 @@ chiller:
             goal:
               properties:
                 data:
-                  type: string
+                  type: object
               required:
               - data
               type: object
-            result: {}
+            result:
+              type: object
           required:
           - goal
           title: modbus_crc参数
@@ -116,42 +119,41 @@ chiller:
           type: object
         type: UniLabJsonCommand
       set_temperature:
-        feedback: {}
+        feedback:
+          status: status
         goal:
           command: command
         goal_default:
           command: ''
         handles: {}
+        placeholder_keys: {}
         result:
+          return_info: return_info
           success: success
         schema:
           description: ''
           properties:
             feedback:
+              additionalProperties: false
               properties:
                 status:
                   type: string
-              required:
-              - status
               title: SendCmd_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 command:
                   type: string
-              required:
-              - command
               title: SendCmd_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
                 success:
                   type: boolean
-              required:
-              - return_info
-              - success
               title: SendCmd_Result
               type: object
           required:
@@ -266,9 +268,15 @@ heaterstirrer.dalong:
         feedback:
           status: status
         goal:
+          pressure: pressure
           purpose: purpose
+          reflux_solvent: reflux_solvent
+          stir: stir
+          stir_speed: stir_speed
           temp: temp
+          temp_spec: temp_spec
           time: time
+          time_spec: time_spec
           vessel: vessel
         goal_default:
           pressure: ''
@@ -301,20 +309,23 @@ heaterstirrer.dalong:
             sample_id: ''
             type: ''
         handles: {}
+        placeholder_keys: {}
         result:
+          message: message
+          return_info: return_info
           success: success
         schema:
           description: ''
           properties:
             feedback:
+              additionalProperties: false
               properties:
                 status:
                   type: string
-              required:
-              - status
               title: HeatChill_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 pressure:
                   type: string
@@ -325,8 +336,12 @@ heaterstirrer.dalong:
                 stir:
                   type: boolean
                 stir_speed:
+                  maximum: 1.7976931348623157e+308
+                  minimum: -1.7976931348623157e+308
                   type: number
                 temp:
+                  maximum: 1.7976931348623157e+308
+                  minimum: -1.7976931348623157e+308
                   type: number
                 temp_spec:
                   type: string
@@ -335,6 +350,7 @@ heaterstirrer.dalong:
                 time_spec:
                   type: string
                 vessel:
+                  additionalProperties: false
                   properties:
                     category:
                       type: string
@@ -353,16 +369,26 @@ heaterstirrer.dalong:
                     parent:
                       type: string
                     pose:
+                      additionalProperties: false
                       properties:
                         orientation:
+                          additionalProperties: false
                           properties:
                             w:
+                              maximum: 1.7976931348623157e+308
+                              minimum: -1.7976931348623157e+308
                               type: number
                             x:
+                              maximum: 1.7976931348623157e+308
+                              minimum: -1.7976931348623157e+308
                               type: number
                             y:
+                              maximum: 1.7976931348623157e+308
+                              minimum: -1.7976931348623157e+308
                               type: number
                             z:
+                              maximum: 1.7976931348623157e+308
+                              minimum: -1.7976931348623157e+308
                               type: number
                           required:
                           - x
@@ -372,12 +398,19 @@ heaterstirrer.dalong:
                           title: orientation
                           type: object
                         position:
+                          additionalProperties: false
                           properties:
                             x:
+                              maximum: 1.7976931348623157e+308
+                              minimum: -1.7976931348623157e+308
                               type: number
                             y:
+                              maximum: 1.7976931348623157e+308
+                              minimum: -1.7976931348623157e+308
                               type: number
                             z:
+                              maximum: 1.7976931348623157e+308
+                              minimum: -1.7976931348623157e+308
                               type: number
                           required:
                           - x
@@ -407,20 +440,10 @@ heaterstirrer.dalong:
                   - data
                   title: vessel
                   type: object
-              required:
-              - vessel
-              - temp
-              - time
-              - temp_spec
-              - time_spec
-              - pressure
-              - reflux_solvent
-              - stir
-              - stir_speed
-              - purpose
               title: HeatChill_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 message:
                   type: string
@@ -428,10 +451,6 @@ heaterstirrer.dalong:
                   type: string
                 success:
                   type: boolean
-              required:
-              - success
-              - message
-              - return_info
               title: HeatChill_Result
               type: object
           required:
@@ -440,42 +459,42 @@ heaterstirrer.dalong:
           type: object
         type: HeatChill
       set_temp_target:
-        feedback: {}
+        feedback:
+          status: status
         goal:
-          command: temp
+          command: command
+          temp: temp
         goal_default:
           command: ''
         handles: {}
+        placeholder_keys: {}
         result:
+          return_info: return_info
           success: success
         schema:
           description: ''
           properties:
             feedback:
+              additionalProperties: false
               properties:
                 status:
                   type: string
-              required:
-              - status
               title: SendCmd_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 command:
                   type: string
-              required:
-              - command
               title: SendCmd_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
                 success:
                   type: boolean
-              required:
-              - return_info
-              - success
               title: SendCmd_Result
               type: object
           required:
@@ -484,42 +503,42 @@ heaterstirrer.dalong:
           type: object
         type: SendCmd
       set_temp_warning:
-        feedback: {}
+        feedback:
+          status: status
         goal:
-          command: temp
+          command: command
+          temp: temp
         goal_default:
           command: ''
         handles: {}
+        placeholder_keys: {}
         result:
+          return_info: return_info
           success: success
         schema:
           description: ''
           properties:
             feedback:
+              additionalProperties: false
               properties:
                 status:
                   type: string
-              required:
-              - status
               title: SendCmd_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 command:
                   type: string
-              required:
-              - command
               title: SendCmd_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
                 success:
                   type: boolean
-              required:
-              - return_info
-              - success
               title: SendCmd_Result
               type: object
           required:
@@ -569,8 +588,8 @@ heaterstirrer.dalong:
       - status
       - stir_speed
       - temp
-      - temp_warning
       - temp_target
+      - temp_warning
       type: object
   version: 1.0.0
 tempsensor:
@@ -691,42 +710,41 @@ tempsensor:
           type: object
         type: UniLabJsonCommand
       set_warning:
-        feedback: {}
+        feedback:
+          status: status
         goal:
           command: command
         goal_default:
           command: ''
         handles: {}
+        placeholder_keys: {}
         result:
+          return_info: return_info
           success: success
         schema:
           description: ''
           properties:
             feedback:
+              additionalProperties: false
               properties:
                 status:
                   type: string
-              required:
-              - status
               title: SendCmd_Feedback
               type: object
             goal:
+              additionalProperties: false
               properties:
                 command:
                   type: string
-              required:
-              - command
               title: SendCmd_Goal
               type: object
             result:
+              additionalProperties: false
               properties:
                 return_info:
                   type: string
                 success:
                   type: boolean
-              required:
-              - return_info
-              - success
               title: SendCmd_Result
               type: object
           required: