open_pub/Uni-Lab-OS
1
0
Fork 0
mirror of https://github.com/deepmodeling/Uni-Lab-OS synced 2026-05-23 02:19:58 +00:00
Code Issues Packages Projects Releases Wiki Activity
Files
ba7995270a235e89d124853db0ac361f853e374c
Uni-Lab-OS/unilabos/devices/donghua_ec/x64release/DHInterface/DhElecChem_Net.ini
Andy6M 9165c9f421 feat: 新增东华电化学设备驱动、SSE自动合成设备，优化扣电组装条码匹配逻辑 
- 新增 donghua_ec 电化学工作站驱动及相关 DLL 依赖
- 新增 sse_auto_synthesis 自动合成设备驱动及注册配置
- 优化 coin_cell_assembly.py 电解液瓶条码精确匹配方案（按条码反查配方，降级按位置索引兜底）

Co-authored-by: Cursor <cursoragent@cursor.com>
2026-05-22 15:14:54 +08:00

3276 lines
88 KiB
INI
Raw Blame History

This file contains ambiguous Unicode characters
This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.
[SystemParameter]
RAMLength = 1024 ;RAM空间长度(k)
VoltageBase = 5000
ADBits = 18
ADBase = 8388608 ;AD分辨率
SaveType = 1 ;保存类型 short - 0 float - 1 int - 2(新软件新添加的参数)
ContinueMaxFreq = 512000
MaxFreq = 512000
AllowFreqMode = 3
AutoCheck = 1
ExistSignalExtraTrig = 0
ExistExtraTrig = 1
SoftExtraTrigInstant = 1
SendTrigCode = 0
DetectAmplifier = 0 ;是否自动检测放大器 0-设置 1-检测
SameFrequency = 1
;连续与瞬态公用频率信息
OutClkCoordXCoef = 1
;外部时钟横坐标修正系数
OutClkPntsPerCycle = 2880 ;外部时钟模式下的周期点数
GPS = 0
CAN = 0
ExistIO = 0
PulseCounter = 0
PulseCounterCount = 2
ExtraSpeed0 = 0 ;控制卡附加转速模式
ExtraSpeedCount = 2
;控制卡存在几个转速通道
SplitSpeedCount = 1
;一个转速通道分几路数据，不大于8
ExtraSignal0 = 0 ;控制卡信号源模式
ExtraSignalCount = 2 ;控制卡存在几个信号源通道
SplitSignalCount = 1 ;一个信号源通道分几路数据
OutDebugInfo = 0; 输出调试信息
OutControlEnable = 1 ; 外部网络连接控制
[TriggerParameter]
TriggerLevelCount = 10
TriggerLevel0 = 10%
TriggerLevel1 = 20%
TriggerLevel2 = 30%
TriggerLevel3 = 40%
TriggerLevel4 = 50%
TriggerLevel5 = 60%
TriggerLevel6 = 70%
TriggerLevel7 = 80%
TriggerLevel8 = 90%
TriggerLevel9 = OFF
[ContinuousSampleFrequency]
FrequencyLevelCount = 15
DefaultFreqIndex = 9
Frequency0 = 10Hz, 12.8Hz
Frequency1 = 20Hz, 25.6Hz
Frequency2 = 50Hz, 51.2Hz
Frequency3 = 100Hz, 128Hz
Frequency4 = 200Hz, 256Hz
Frequency5 = 500Hz, 512Hz
Frequency6 = 1000Hz, 1280Hz
Frequency7 = 2000Hz, 2560Hz
Frequency8 = 5000Hz, 5120Hz
Frequency9 = 10000Hz, 12800Hz
Frequency10 = 20000Hz, 25600Hz
Frequency11 = 50000Hz, 51200Hz
Frequency12 = 100000Hz,128000Hz
Frequency13 = 200000Hz,256000Hz
Frequency14 = 500000Hz,512000Hz
ParaCode0 = 3,102
ParaCode1 = 4,103
ParaCode2 = 5,104
ParaCode3 = 6,105
ParaCode4 = 7,106
ParaCode5 = 8,107
ParaCode6 = 9,108
ParaCode7 = 10,109
ParaCode8 = 11,110
ParaCode9 = 12,111
ParaCode10 = 13,112
ParaCode11 = 14,113
ParaCode12 = 15,114
ParaCode13 = 16,116
ParaCode14 = 17,117
CtrlCode0 = 5, 3
CtrlCode1 = 5, 3
CtrlCode2 = 5, 3
CtrlCode3 = 5, 3
CtrlCode4 = 5, 3
CtrlCode5 = 4, 3
CtrlCode6 = 4, 3
CtrlCode7 = 4, 3
CtrlCode8 = 4, 3
CtrlCode9 = 4, 3
CtrlCode10 = 4, 3
CtrlCode11 = 4, 3
CtrlCode12 = 4, 3
CtrlCode13 = 4, 3
CtrlCode14 = 4, 3
NetJumpBlock0 = 1
NetJumpBlock1 = 1
NetJumpBlock2 = 1
NetJumpBlock3 = 1
NetJumpBlock4 = 1
NetJumpBlock5 = 1
NetJumpBlock6 = 1
NetJumpBlock7 = 2
NetJumpBlock8 = 4
NetJumpBlock9 = 8
NetJumpBlock10 = 16
NetJumpBlock11 = 32
NetJumpBlock12 = 64
NetJumpBlock13 = 128
NetJumpBlock14 = 256
DataRatio0 = 1
DataRatio1 = 1
DataRatio2 = 1
DataRatio3 = 1
DataRatio4 = 1
DataRatio5 = 2
DataRatio6 = 4
DataRatio7 = 16
DataRatio8 = 32
DataRatio9 = 64
DataRatio10 = 200
DataRatio11 = 512
DataRatio12 = 512
DataRatio13 = 512
DataRatio14 = 512
SectionNumber = 6
SectionChannel0 = 64
SectionChannel1 = 32
SectionChannel2 = 16
SectionChannel3 = 8
SectionChannel4 = 4
SectionChannel5 = 1
SectionFrequency0 = 14
SectionFrequency1 = 14
SectionFrequency2 = 14
SectionFrequency3 = 14
SectionFrequency4 = 15
SectionFrequency5 = 15
[InstantSampleFrequency]
FrequencyLevelCount = 14
DefaultFreqIndex = 9
Frequency0 = 10Hz, 12.8Hz
Frequency1 = 20Hz, 25.6Hz
Frequency2 = 50Hz, 51.2Hz
Frequency3 = 100Hz, 128Hz
Frequency4 = 200Hz, 256Hz
Frequency5 = 500Hz, 512Hz
Frequency6 = 1000Hz, 1280Hz
Frequency7 = 2000Hz, 2560Hz
Frequency8 = 5000Hz, 5120Hz
Frequency9 = 10000Hz, 12800Hz
Frequency10 = 20000Hz, 25600Hz
Frequency11 = 50000Hz, 51200Hz
Frequency12 = 100000Hz,128000Hz
Frequency13 = 200000Hz,256000Hz
ParaCode0 = 3,102
ParaCode1 = 4,103
ParaCode2 = 5,104
ParaCode3 = 6,105
ParaCode4 = 7,106
ParaCode5 = 8,107
ParaCode6 = 9,108
ParaCode7 = 10,109
ParaCode8 = 11,110
ParaCode9 = 12,111
ParaCode10 = 13,112
ParaCode11 = 14,113
ParaCode12 = 15,114
ParaCode13 = 16,116
CtrlCode0 = 4
CtrlCode1 = 4
CtrlCode2 = 4
CtrlCode3 = 4
CtrlCode4 = 4
CtrlCode5 = 4
CtrlCode6 = 4
CtrlCode7 = 4
CtrlCode8 = 4
CtrlCode9 = 4
CtrlCode10 = 4
CtrlCode11 = 4
CtrlCode12 = 4
CtrlCode13 = 4
[InputModeItem]
InputModeCount = 5
InputMode0 = DIF_DC,ParaCode=001
InputMode1 = SIN_DC,ParaCode=002
InputMode2 = AC,ParaCode=003
InputMode3 = IEPE,ParaCode=004
InputMode4 = GND,ParaCode=005
[Experiment]
;实验类型
;实验名称和使用电路,格式：前后都有','，以','分隔
Circuit0 = ,2,3,8,10,5,6,1,4,0,13,15,16,17,19,20,21,22,23,24,25,28,29,32,33,35,36,37,49,50,52,56,63,65,66,67,91,92,93,114,82,113,115,116,117,118,119,120,121,111,98,99,122,123,127,128,129,130,141,143,148,150,151,153,154,
;Circle Voltammetry(Single)
;Circle Voltammetry(Multiple Cycles)
;Chronoamperonetry
;Chronopotentiometry
;Chronocoulometry
;Staircase_Cyclic_Voltammetry_Single
;Linear_Scan_Voltammetry
;Staircase_Linear_Scan_Voltammetry
Circuit1 = ,9,14,34,64,26,27,38,39,40,70,75,76,90,100,112,124,125,126,142,149,
;实验信号源通道是否需要乘以电阻
WaveCalcResistance = ,9,14,26,27,34,38,39,40,70,75,76,90,100,112,
;实验信号源通道两成档位判断使用顶点值，否则使用起始值
;不使用WaveCurrentLevelUseVertex = ,27,
;丢点数 DataThrowID为实验类型
DataThrow0 = 0
某种测量类型对应实验类型的数据是否已经修正过 = 实验类型 前后都有','，以','分隔,39,40,
Modified79
[Circuit]
;电路选项
CircuitCount = 2
Circuit0 = 0
;恒压源电路
Circuit1 = 1
;恒流源电路
[ADSwitch]
;根据采样频率AD切换
ADSwitchFreq = 0Hz
;// 采样频率分界线 接AD18bit/接AD24bit 200及以下采样频率为24位AD,Index = 0 200以上采样频率为18位AD,Index=1
;new version 中只有1个AD。18bit
;ADSwitchCount = 2
;ADSwitch0 = 0
;接AD24bit
;ADSwitch1 = 1
;接AD18bit
[ElectrolyticCellType]
;电解池选项
ElectrolyticCellTypeCount = 2
ElectrolyticCellType0 = 0
;外部电解池
ElectrolyticCellType1 = 1
;内部电解池
[ElectrolyticCellOnOff]
;电解池开关选项
ElectrolyticCellOnOffCount = 7
ElectrolyticCellOnOff0 = 0
;电解池关(外部)
ElectrolyticCellOnOff1 = 1
;电解池开(外部)
ElectrolyticCellOnOff2 = 2
;开路电位电解池开
ElectrolyticCellOnOff3 = 3
;(小)关
ElectrolyticCellOnOff4 = 4
;(小)开
ElectrolyticCellOnOff5 = 5
;(大)关
ElectrolyticCellOnOff6 = 6
;(大)开
[Electrode]
;电极选项
ElectrodeCount = 2
Electrode0 = 0
;三电极
Electrode1 = 1
;四电极
[ECPolarity]
;极性选项
ECPolarityCount = 2
ECPolarity0 = 0
;正极性
ECPolarity1 = 1
;负极性
[ECReactive]
;正反馈选项
ECReactiveCount = 2
ECReactive0 = 0
;关
ECReactive1 = 1
;开
;负反馈选项
[WaveParameter]
Level = 3
Level0 = 1e-4
Level1 = 1
Level2 = 1e4
ConstFreq0 = 1e-3
ConstFreq1 = 1e3
ConstFreq2 = 1e5
ConstFreq3 = 5.12e7
; 警告以下通道类型的编号与软件内部相关，不可随意调整;
; AcqTypeID:1 信号源;2 电压;3 电流 量程;4 电流 滤波;
; ver : -1默认7000之前的仪器基本已经不使用，可以作为通用配置;
; ver:1 最早的一个版本,也就是老的7001;ver:2 DH7000;ver:3 DH7001;ver:4 7002;ver:5 7006(多通道);ver:6 7003;
; ver:7 7003-2 电流增加2A;ver:8 7000_A(Dh7000_A.ini);ver:9 7000_1(单，通道同7003);ver:0x0A 7005;ver:0x0b 7003_A;
; ver:0x0C 7000_C(7005基础上,使用7000档位);ver:0x0D 7001_A(7000_C增加档位 2A)
; 7002+功放说明:常规不支持交流阻抗+平衡结果下传,根据不同调理器配置;
;信号源通道
[AcquisitionChannelType1]
ChannelName = DH_SIGNAL_6档
;信号源
AcqTypeID = 001
AcqVersion = -1
FilterUpCount = 9
FilterUpDefault = 8
FilterUp0 = 10Hz, ParaCode=008
FilterUp1 = 50Hz, ParaCode=032
FilterUp2 = 100Hz, ParaCode=006
FilterUp3 = 600Hz, ParaCode=040
FilterUp4 = 1kHz, ParaCode=004
FilterUp5 = 5kHz, ParaCode=017
FilterUp6 = 10kHz, ParaCode=002
FilterUp7 = 50kHz, ParaCode=014
FilterUp8 = PASS, ParaCode=001
;恒流输出0x9d
FullValueCount = 6
FullValue0 = 1000mA,ParaCode=009
FullValue1 = 100mA,ParaCode=008
FullValue2 = 10mA,ParaCode=007
FullValue3 = 1mA,ParaCode=006
FullValue4 = 0.1mA,ParaCode=005
FullValue5 = 0.01mA,ParaCode=004
CircuitType0_RCount = 0 ;电阻计算
CircuitType1_RCount = 6
CircuitType1_R0 = 1
CircuitType1_R1 = 10
CircuitType1_R2 = 100
CircuitType1_R3 = 1000
CircuitType1_R4 = 10000
CircuitType1_R5 = 100000
;数采通道1 电压
[AcquisitionChannelType2]
ChannelName = DH_AD0_前30台
;电压(采R极电势)
AcqTypeID = 002
;通道总数 = 4
AcqVersion = -1
;电压档位(大小均有)
FullValueCount = 3
FullValue0 = 10000mV,ParaCode=001
FullValue1 = 1000mV,ParaCode=004
FullValue2 = 100mV,ParaCode=007
;超过ReplaceCurrent替换FullValue参数码
;UseReplaceFullValue = 1
;ReplaceCurrent = 0.01mA
;ReplaceFullValueCount = 3
;ReplaceFullValue0 = 10000mV,ParaCode=001
;ReplaceFullValue1 = 1000mV,ParaCode=004
;ReplaceFullValue2 = 100mV,ParaCode=007
;低通滤波器0x04
FilterUpCount = 9
FilterUpDefault = 8
FilterUp0 = 10Hz, ParaCode=008
FilterUp1 = 50Hz, ParaCode=032
FilterUp2 = 100Hz, ParaCode=006
FilterUp3 = 600Hz, ParaCode=040
FilterUp4 = 1kHz, ParaCode=004
FilterUp5 = 5kHz, ParaCode=017
FilterUp6 = 10kHz, ParaCode=002
FilterUp7 = 50kHz, ParaCode=014
FilterUp8 = PASS, ParaCode=001
;ElectrodeCount = 2
;Electrode0 = 0, ParaCode=000
;Electrode1 = 1, ParaCode=001
;ECReactiveCount = 2
;ECReactive0 = 0, ParaCode=000
;ECReactive1 = 1, ParaCode=001
;恒压恒流类型0x9a
ECCircuitCount = 2
ECCircuit0 = 0, ParaCode=000
ECCircuit1 = 1, ParaCode=001
;电解池类型0x9b
;ElectrolyticCellTypeCount = 2
;外部电解池
;ElectrolyticCellType0 = 0, ParaCode=001
;内部电解池
;ElectrolyticCellType1 = 1, ParaCode=000
;电解池开关0x9c
ElectrolyticCellOnOffCount = 3
;电解池关(外部)
ElectrolyticCellOnOff0 = 0, ParaCode=000
;电解池开(外部)
ElectrolyticCellOnOff1 = 1, ParaCode=001
;开路电位电解池开
ElectrolyticCellOnOff2 = 2, ParaCode=002
;电流(恒压源实验采W极输出的电流，恒流源实验采C极输出的电流)电流 量程+滤波
[AcquisitionChannelType3]
ChannelName = DH_AD1_前30台
AcqTypeID = 003
;通道总数 = 4
AcqVersion = -1
;恒流输出0x9d
FullValueCount = 11
FullValue0 = 1000mA,ParaCode=010
FullValue1 = 100mA,ParaCode=009
FullValue2 = 10mA,ParaCode=008
FullValue3 = 1mA,ParaCode=007
FullValue4 = 0.1mA,ParaCode=006
FullValue5 = 0.01mA,ParaCode=005
FullValue6 = 0.001mA,ParaCode=004
FullValue7 = 0.0001mA,ParaCode=003
FullValue8 = 0.00001mA,ParaCode=002
FullValue9 = 0.000001mA,ParaCode=001
FullValue10 = 0.0000001mA,ParaCode=000
;低通滤波器0x04
FilterUpCount = 9
FilterUpDefault = 8
FilterUp0 = 10Hz, ParaCode=008
FilterUp1 = 50Hz, ParaCode=032
FilterUp2 = 100Hz, ParaCode=006
FilterUp3 = 600Hz, ParaCode=040
FilterUp4 = 1kHz, ParaCode=004
FilterUp5 = 5kHz, ParaCode=017
FilterUp6 = 10kHz, ParaCode=002
FilterUp7 = 50kHz, ParaCode=014
FilterUp8 = PASS, ParaCode=001
;电流辅助通道
[AcquisitionChannelType4]
ChannelName = DH_AD1_SUB
AcqTypeID = 004
AcqVersion = -1
;恒流输出0x9d
FullValueCount = 10
FullValue0 = 1000mA,ParaCode=010
FullValue1 = 100mA,ParaCode=009
FullValue2 = 10mA,ParaCode=008
FullValue3 = 1mA,ParaCode=007
FullValue4 = 0.1mA,ParaCode=006
FullValue5 = 0.01mA,ParaCode=005
FullValue6 = 0.001mA,ParaCode=004
FullValue7 = 0.0001mA,ParaCode=003
FullValue8 = 0.00001mA,ParaCode=002
FullValue9 = 0.000001mA,ParaCode=001
;FullValue10 = 0.0000001mA,ParaCode=000
;低通滤波器0x04
FilterUpCount = 9
FilterUpDefault = 8
FilterUp0 = 10Hz, ParaCode=008
FilterUp1 = 50Hz, ParaCode=032
FilterUp2 = 100Hz, ParaCode=006
FilterUp3 = 600Hz, ParaCode=040
FilterUp4 = 1kHz, ParaCode=004
FilterUp5 = 5kHz, ParaCode=017
FilterUp6 = 10kHz, ParaCode=002
FilterUp7 = 50kHz, ParaCode=014
FilterUp8 = PASS, ParaCode=001
;信号源通道
[AcquisitionChannelType5]
ChannelName = DH_SIGNAL_8档
;信号源
AcqTypeID = 001
AcqVersion = 2
FilterUpCount = 9
FilterUpDefault = 8
FilterUp0 = 10Hz, ParaCode=008
FilterUp1 = 50Hz, ParaCode=032
FilterUp2 = 100Hz, ParaCode=006
FilterUp3 = 600Hz, ParaCode=040
FilterUp4 = 1kHz, ParaCode=004
FilterUp5 = 5kHz, ParaCode=017
FilterUp6 = 10kHz, ParaCode=002
FilterUp7 = 50kHz, ParaCode=014
FilterUp8 = PASS, ParaCode=001
;恒流输出0x9d
FullValueCount = 8
FullValue0 = 1000mA,ParaCode=009
FullValue1 = 100mA,ParaCode=008
FullValue2 = 10mA,ParaCode=007
FullValue3 = 1mA,ParaCode=006
FullValue4 = 0.1mA,ParaCode=005
FullValue5 = 0.01mA,ParaCode=004
FullValue6 = 0.001mA,ParaCode=003
FullValue7 = 0.0001mA,ParaCode=002
CircuitType0_RCount = 0 ;电阻计算
CircuitType1_RCount = 8
CircuitType1_R0 = 1
CircuitType1_R1 = 10
CircuitType1_R2 = 100
CircuitType1_R3 = 1000
CircuitType1_R4 = 10000
CircuitType1_R5 = 100000
CircuitType1_R6 = 1000000
CircuitType1_R7 = 10000000
;数采通道1 电压 +DSP
[AcquisitionChannelType6]
ChannelName = DH_AD0
;电压(采R极电势)
AcqTypeID = 002
;通道总数 = 4
AcqVersion = 2
;电压档位(大小均有)
FullValueCount = 3
FullValue0 = 10000mV,ParaCode=001
FullValue1 = 1000mV,ParaCode=004
FullValue2 = 100mV,ParaCode=007
;超过ReplaceCurrent替换FullValue参数码
;UseReplaceFullValue = 1
;ReplaceCurrent = 0.01mA
;ReplaceFullValueCount = 3
;ReplaceFullValue0 = 10000mV,ParaCode=001
;ReplaceFullValue1 = 1000mV,ParaCode=004
;ReplaceFullValue2 = 100mV,ParaCode=007
;低通滤波器0x04
FilterUpCount = 9
FilterUpDefault = 8
FilterUp0 = 10Hz, ParaCode=008
FilterUp1 = 50Hz, ParaCode=032
FilterUp2 = 100Hz, ParaCode=006
FilterUp3 = 600Hz, ParaCode=040
FilterUp4 = 1kHz, ParaCode=004
FilterUp5 = 5kHz, ParaCode=017
FilterUp6 = 10kHz, ParaCode=002
FilterUp7 = 50kHz, ParaCode=014
FilterUp8 = PASS, ParaCode=001
;ElectrodeCount = 2
;Electrode0 = 0, ParaCode=000
;Electrode1 = 1, ParaCode=001
;ECReactiveCount = 2
;ECReactive0 = 0, ParaCode=000
;ECReactive1 = 1, ParaCode=001
;恒压恒流类型0x9a
ECCircuitCount = 2
ECCircuit0 = 0, ParaCode=000
ECCircuit1 = 1, ParaCode=001
;电解池类型0x9b
;ElectrolyticCellTypeCount = 2
;外部电解池
;ElectrolyticCellType0 = 0, ParaCode=001
;内部电解池
;ElectrolyticCellType1 = 1, ParaCode=000
;电解池开关0x9c
ElectrolyticCellOnOffCount = 3
;电解池关(外部)
ElectrolyticCellOnOff0 = 0, ParaCode=000
;电解池开(外部)
ElectrolyticCellOnOff1 = 1, ParaCode=001
;开路电位电解池开
ElectrolyticCellOnOff2 = 2, ParaCode=002
;电流(恒压源实验采W极输出的电流，恒流源实验采C极输出的电流)电流 量程+滤波 +DSP
[AcquisitionChannelType7]
ChannelName = DH_AD1
AcqTypeID = 003
;通道总数 = 4
AcqVersion = 2
;恒流输出0x9d
FullValueCount = 12
FullValue0 = 1000mA,ParaCode=010
FullValue1 = 100mA,ParaCode=009
FullValue2 = 10mA,ParaCode=008
FullValue3 = 1mA,ParaCode=007
FullValue4 = 0.1mA,ParaCode=006
FullValue5 = 0.01mA,ParaCode=005
FullValue6 = 0.001mA,ParaCode=004
FullValue7 = 0.0001mA,ParaCode=003
FullValue8 = 0.00001mA,ParaCode=002
FullValue9 = 0.000001mA,ParaCode=001
FullValue10 = 0.0000001mA,ParaCode=000
FullValue11 = 1000000mA,ParaCode=255
;低通滤波器0x04
FilterUpCount = 9
FilterUpDefault = 8
FilterUp0 = 10Hz, ParaCode=008
FilterUp1 = 50Hz, ParaCode=032
FilterUp2 = 100Hz, ParaCode=006
FilterUp3 = 600Hz, ParaCode=040
FilterUp4 = 1kHz, ParaCode=004
FilterUp5 = 5kHz, ParaCode=017
FilterUp6 = 10kHz, ParaCode=002
FilterUp7 = 50kHz, ParaCode=014
FilterUp8 = PASS, ParaCode=001
;电流辅助通道
[AcquisitionChannelType8]
ChannelName = DH_AD1_SUB
AcqTypeID = 004
AcqVersion = 2
;低通滤波器0x04
FilterUpCount = 9
FilterUpDefault = 8
FilterUp0 = 10Hz, ParaCode=008
FilterUp1 = 50Hz, ParaCode=032
FilterUp2 = 100Hz, ParaCode=006
FilterUp3 = 600Hz, ParaCode=040
FilterUp4 = 1kHz, ParaCode=004
FilterUp5 = 5kHz, ParaCode=017
FilterUp6 = 10kHz, ParaCode=002
FilterUp7 = 50kHz, ParaCode=014
FilterUp8 = PASS, ParaCode=001
;数采通道1 电压 +DSP
[AcquisitionChannelType9]
ChannelName = DH_AD0+DSP
;电压(采R极电势)
AcqTypeID = 002
;通道总数 = 4
AcqVersion = 3
;电压档位(大小均有)
FullValueCount = 3
FullValue0 = 10000mV,ParaCode=001
FullValue1 = 1000mV,ParaCode=004
FullValue2 = 100mV,ParaCode=007
;超过ReplaceCurrent替换FullValue参数码
;UseReplaceFullValue = 1
;ReplaceCurrent = 0.01mA
;ReplaceFullValueCount = 3
;ReplaceFullValue0 = 10000mV,ParaCode=001
;ReplaceFullValue1 = 1000mV,ParaCode=004
;ReplaceFullValue2 = 100mV,ParaCode=007
;低通滤波器0x04
FilterUpCount = 9
FilterUpDefault = 8
FilterUp0 = 10Hz, ParaCode=008
FilterUp1 = 50Hz, ParaCode=032
FilterUp2 = 100Hz, ParaCode=006
FilterUp3 = 500Hz, ParaCode=016
FilterUp4 = 1kHz, ParaCode=004
FilterUp5 = 5kHz, ParaCode=017
FilterUp6 = 10kHz, ParaCode=002
FilterUp7 = 50kHz, ParaCode=014
FilterUp8 = PASS, ParaCode=001
;ElectrodeCount = 2
;Electrode0 = 0, ParaCode=000
;Electrode1 = 1, ParaCode=001
;ECReactiveCount = 2
;ECReactive0 = 0, ParaCode=000
;ECReactive1 = 1, ParaCode=001
;恒压恒流类型0x9a
ECCircuitCount = 2
ECCircuit0 = 0, ParaCode=000
ECCircuit1 = 1, ParaCode=001
;电解池类型0x9b
;ElectrolyticCellTypeCount = 2
;外部电解池
;ElectrolyticCellType0 = 0, ParaCode=001
;内部电解池
;ElectrolyticCellType1 = 1, ParaCode=000
;电解池开关0x9c
ElectrolyticCellOnOffCount = 3
;电解池关(外部)
ElectrolyticCellOnOff0 = 0, ParaCode=000
;电解池开(外部)
ElectrolyticCellOnOff1 = 1, ParaCode=001
;开路电位电解池开
ElectrolyticCellOnOff2 = 2, ParaCode=002
;电流(恒压源实验采W极输出的电流，恒流源实验采C极输出的电流)电流 量程+滤波 +DSP
[AcquisitionChannelType10]
ChannelName = DH_AD1+DSP
AcqTypeID = 003
;通道总数 = 4
AcqVersion = 3
;恒流输出0x9d
FullValueCount = 13
FullValue0 = 2000mA,ParaCode=011
FullValue1 = 1000mA,ParaCode=010
FullValue2 = 100mA,ParaCode=009
FullValue3 = 10mA,ParaCode=008
FullValue4 = 1mA,ParaCode=007
FullValue5 = 0.1mA,ParaCode=006
FullValue6 = 0.01mA,ParaCode=005
FullValue7 = 0.001mA,ParaCode=004
FullValue8 = 0.0001mA,ParaCode=003
FullValue9 = 0.00001mA,ParaCode=002
FullValue10 = 0.000001mA,ParaCode=001
FullValue11 = 0.0000001mA,ParaCode=000
FullValue12 = 1000000mA,ParaCode=255
;低通滤波器0x04
FilterUpCount = 9
FilterUpDefault = 8
FilterUp0 = 10Hz, ParaCode=008
FilterUp1 = 50Hz, ParaCode=032
FilterUp2 = 100Hz, ParaCode=006
FilterUp3 = 500Hz, ParaCode=016
FilterUp4 = 1kHz, ParaCode=004
FilterUp5 = 5kHz, ParaCode=017
FilterUp6 = 10kHz, ParaCode=002
FilterUp7 = 50kHz, ParaCode=014
FilterUp8 = PASS, ParaCode=001
;电流辅助通道
[AcquisitionChannelType11]
ChannelName = DH_AD1+DSP_SUB
AcqTypeID = 004
;通道总数 = 4
AcqVersion = 3
;低通滤波器0x04
FilterUpCount = 9
FilterUpDefault = 8
FilterUp0 = 10Hz, ParaCode=008
FilterUp1 = 50Hz, ParaCode=032
FilterUp2 = 100Hz, ParaCode=006
FilterUp3 = 500Hz, ParaCode=016
FilterUp4 = 1kHz, ParaCode=004
FilterUp5 = 5kHz, ParaCode=017
FilterUp6 = 10kHz, ParaCode=002
FilterUp7 = 50kHz, ParaCode=014
FilterUp8 = PASS, ParaCode=001
;信号源通道
[AcquisitionChannelType12]
ChannelName = DH_SIGNAL_8档
;信号源
AcqTypeID = 001
AcqVersion = 3
FilterUpCount = 9
FilterUpDefault = 8
FilterUp0 = 10Hz, ParaCode=008
FilterUp1 = 50Hz, ParaCode=032
FilterUp2 = 100Hz, ParaCode=006
FilterUp3 = 500Hz, ParaCode=016
FilterUp4 = 1kHz, ParaCode=004
FilterUp5 = 5kHz, ParaCode=017
FilterUp6 = 10kHz, ParaCode=002
FilterUp7 = 50kHz, ParaCode=014
FilterUp8 = PASS, ParaCode=001
;恒流输出0x9d
FullValueCount = 8
FullValue0 = 1000mA,ParaCode=009
FullValue1 = 100mA,ParaCode=008
FullValue2 = 10mA,ParaCode=007
FullValue3 = 1mA,ParaCode=006
FullValue4 = 0.1mA,ParaCode=005
FullValue5 = 0.01mA,ParaCode=004
FullValue6 = 0.001mA,ParaCode=003
FullValue7 = 0.0001mA,ParaCode=002
CircuitType0_RCount = 0 ;电阻计算
CircuitType1_RCount = 8
CircuitType1_R0 = 1
CircuitType1_R1 = 10
CircuitType1_R2 = 100
CircuitType1_R3 = 1000
CircuitType1_R4 = 10000
CircuitType1_R5 = 100000
CircuitType1_R6 = 1000000
CircuitType1_R7 = 10000000
;信号源通道
[AcquisitionChannelType13]
ChannelName = DH_SIGNAL_8档
;信号源 增加4A
AcqTypeID = 001
AcqVersion = 4
FilterUpCount = 9
FilterUpDefault = 8
FilterUp0 = 10Hz, ParaCode=008
FilterUp1 = 50Hz, ParaCode=032
FilterUp2 = 100Hz, ParaCode=006
FilterUp3 = 500Hz, ParaCode=016
FilterUp4 = 1kHz, ParaCode=004
FilterUp5 = 5kHz, ParaCode=017
FilterUp6 = 10kHz, ParaCode=002
FilterUp7 = 50kHz, ParaCode=014
FilterUp8 = PASS, ParaCode=001
;恒流输出0x9d
FullValueCount = 10
FullValue0 = 4000mA,ParaCode=011
FullValue1 = 2000mA,ParaCode=010
FullValue2 = 1000mA,ParaCode=009
FullValue3 = 100mA,ParaCode=008
FullValue4 = 10mA,ParaCode=007
FullValue5 = 1mA,ParaCode=006
FullValue6 = 0.1mA,ParaCode=005
FullValue7 = 0.01mA,ParaCode=004
FullValue8 = 0.001mA,ParaCode=003
FullValue9 = 0.0001mA,ParaCode=002
CircuitType0_RCount = 0 ;电阻计算
CircuitType1_RCount = 10
CircuitType1_R0 = 0.5
CircuitType1_R1 = 0.5
CircuitType1_R2 = 1
CircuitType1_R3 = 10
CircuitType1_R4 = 100
CircuitType1_R5 = 1000
CircuitType1_R6 = 10000
CircuitType1_R7 = 100000
CircuitType1_R8 = 1000000
CircuitType1_R9 = 10000000
;数采通道1 电压 +DSP
[AcquisitionChannelType14]
ChannelName = DH_AD0+DSP
;电压(采R极电势) 增加5V
AcqTypeID = 002
;通道总数 = 4
AcqVersion = 4
;电压档位(大小均有)
FullValueCount = 4
FullValue0 = 10000mV,ParaCode=001
FullValue1 = 1000mV,ParaCode=004
FullValue2 = 100mV,ParaCode=007
;外挂10V
FullValue3 = 10000mV,ParaCode=021
;低通滤波器0x04
FilterUpCount = 8
FilterUpDefault = 7
FilterUp0 = 10Hz, ParaCode=008
FilterUp1 = 50Hz, ParaCode=032
FilterUp2 = 100Hz, ParaCode=006
FilterUp3 = 500Hz, ParaCode=016
FilterUp4 = 1kHz, ParaCode=004
FilterUp5 = 5kHz, ParaCode=017
FilterUp6 = 10kHz, ParaCode=002
FilterUp7 = PASS, ParaCode=001
;恒压恒流类型0x9a
ECCircuitCount = 2
ECCircuit0 = 0, ParaCode=000
ECCircuit1 = 1, ParaCode=001
;电解池开关0x9c
ElectrolyticCellOnOffCount = 3
;电解池关(外部)
ElectrolyticCellOnOff0 = 0, ParaCode=000
;电解池开(外部)
ElectrolyticCellOnOff1 = 1, ParaCode=001
;开路电位电解池开
ElectrolyticCellOnOff2 = 2, ParaCode=002
;电流(恒压源实验采W极输出的电流，恒流源实验采C极输出的电流)电流 量程+滤波 +DSP
[AcquisitionChannelType15]
ChannelName = DH_AD1+DSP
;电流（档位）增加4A,5A,10A,20A,去掉10nA,1nA
AcqTypeID = 003
;通道总数 = 4
AcqVersion = 4
;恒流输出0x9d
FullValueCount = 12
FullValue0 = 4000mA,ParaCode=012
FullValue1 = 2000mA,ParaCode=011
FullValue2 = 1000mA,ParaCode=010
FullValue3 = 100mA,ParaCode=009
FullValue4 = 10mA,ParaCode=008
FullValue5 = 1mA,ParaCode=007
FullValue6 = 0.1mA,ParaCode=006
FullValue7 = 0.01mA,ParaCode=005
FullValue8 = 0.001mA,ParaCode=004
FullValue9 = 0.0001mA,ParaCode=003
FullValue10 = 1000000mA,ParaCode=255
;外挂1A
FullValue11 = 1000mA,ParaCode=013
;低通滤波器0x04
FilterUpCount = 8
FilterUpDefault = 7
FilterUp0 = 10Hz, ParaCode=008
FilterUp1 = 50Hz, ParaCode=032
FilterUp2 = 100Hz, ParaCode=006
FilterUp3 = 500Hz, ParaCode=016
FilterUp4 = 1kHz, ParaCode=004
FilterUp5 = 5kHz, ParaCode=017
FilterUp6 = 10kHz, ParaCode=002
FilterUp7 = PASS, ParaCode=001
;电流辅助通道
[AcquisitionChannelType16]
ChannelName = DH_AD1+DSP_SUB
;电流（滤波器）
AcqTypeID = 004
;通道总数 = 4
AcqVersion = 4
;低通滤波器0x04
FilterUpCount = 8
FilterUpDefault = 7
FilterUp0 = 10Hz, ParaCode=008
FilterUp1 = 50Hz, ParaCode=032
FilterUp2 = 100Hz, ParaCode=006
FilterUp3 = 500Hz, ParaCode=016
FilterUp4 = 1kHz, ParaCode=004
FilterUp5 = 5kHz, ParaCode=017
FilterUp6 = 10kHz, ParaCode=002
FilterUp7 = PASS, ParaCode=001
;信号源通道
[AcquisitionChannelType17]
ChannelName = DH_SIGNAL_8档
;信号源
AcqTypeID = 001
AcqVersion = 5
FilterUpCount = 9
FilterUpDefault = 8
FilterUp0 = 10Hz, ParaCode=008
FilterUp1 = 50Hz, ParaCode=032
FilterUp2 = 100Hz, ParaCode=006
FilterUp3 = 500Hz, ParaCode=016
FilterUp4 = 1kHz, ParaCode=004
FilterUp5 = 5kHz, ParaCode=017
FilterUp6 = 10kHz, ParaCode=002
FilterUp7 = 50kHz, ParaCode=014
FilterUp8 = PASS, ParaCode=001
;恒流输出0x9d
FullValueCount = 8
FullValue0 = 1000mA,ParaCode=009
FullValue1 = 100mA,ParaCode=008
FullValue2 = 10mA,ParaCode=007
FullValue3 = 1mA,ParaCode=006
FullValue4 = 0.1mA,ParaCode=005
FullValue5 = 0.01mA,ParaCode=004
FullValue6 = 0.001mA,ParaCode=003
FullValue7 = 0.0001mA,ParaCode=002
CircuitType0_RCount = 0 ;电阻计算
CircuitType1_RCount = 8
CircuitType1_R0 = 1
CircuitType1_R1 = 10
CircuitType1_R2 = 100
CircuitType1_R3 = 1000
CircuitType1_R4 = 10000
CircuitType1_R5 = 100000
CircuitType1_R6 = 1000000
CircuitType1_R7 = 10000000
;数采通道1 电压 +DSP
[AcquisitionChannelType18]
ChannelName = DH_AD0
;电压(采R极电势)
AcqTypeID = 002
;通道总数 = 4
AcqVersion = 5
;电压档位(大小均有)
FullValueCount = 3
FullValue0 = 10000mV,ParaCode=001
FullValue1 = 1000mV,ParaCode=004
FullValue2 = 100mV,ParaCode=007
;超过ReplaceCurrent替换FullValue参数码
;UseReplaceFullValue = 1
;ReplaceCurrent = 0.01mA
;ReplaceFullValueCount = 3
;ReplaceFullValue0 = 10000mV,ParaCode=001
;ReplaceFullValue1 = 1000mV,ParaCode=004
;ReplaceFullValue2 = 100mV,ParaCode=007
;低通滤波器0x04
FilterUpCount = 9
FilterUpDefault = 8
FilterUp0 = 10Hz, ParaCode=008
FilterUp1 = 50Hz, ParaCode=032
FilterUp2 = 100Hz, ParaCode=006
FilterUp3 = 500Hz, ParaCode=016
FilterUp4 = 1kHz, ParaCode=004
FilterUp5 = 5kHz, ParaCode=017
FilterUp6 = 10kHz, ParaCode=002
FilterUp7 = 50kHz, ParaCode=014
FilterUp8 = PASS, ParaCode=001
;ElectrodeCount = 2
;Electrode0 = 0, ParaCode=000
;Electrode1 = 1, ParaCode=001
;ECReactiveCount = 2
;ECReactive0 = 0, ParaCode=000
;ECReactive1 = 1, ParaCode=001
;恒压恒流类型0x9a
ECCircuitCount = 2
ECCircuit0 = 0, ParaCode=000
ECCircuit1 = 1, ParaCode=001
;电解池类型0x9b
;ElectrolyticCellTypeCount = 2
;外部电解池
;ElectrolyticCellType0 = 0, ParaCode=001
;内部电解池
;ElectrolyticCellType1 = 1, ParaCode=000
;电解池开关0x9c
ElectrolyticCellOnOffCount = 3
;电解池关(外部)
ElectrolyticCellOnOff0 = 0, ParaCode=000
;电解池开(外部)
ElectrolyticCellOnOff1 = 1, ParaCode=001
;开路电位电解池开
ElectrolyticCellOnOff2 = 2, ParaCode=002
;电流(恒压源实验采W极输出的电流，恒流源实验采C极输出的电流)电流 量程+滤波 +DSP
[AcquisitionChannelType19]
ChannelName = DH_AD1
AcqTypeID = 003
;通道总数 = 4
AcqVersion = 5
;恒流输出0x9d
FullValueCount = 11
FullValue0 = 1000mA,ParaCode=010
FullValue1 = 100mA,ParaCode=009
FullValue2 = 10mA,ParaCode=008
FullValue3 = 1mA,ParaCode=007
FullValue4 = 0.1mA,ParaCode=006
FullValue5 = 0.01mA,ParaCode=005
FullValue6 = 0.001mA,ParaCode=004
FullValue7 = 0.0001mA,ParaCode=003
FullValue8 = 0.00001mA,ParaCode=002
FullValue9 = 0.000001mA,ParaCode=001
FullValue10 = 1000000mA,ParaCode=255
;低通滤波器0x04
FilterUpCount = 9
FilterUpDefault = 8
FilterUp0 = 10Hz, ParaCode=008
FilterUp1 = 50Hz, ParaCode=032
FilterUp2 = 100Hz, ParaCode=006
FilterUp3 = 500Hz, ParaCode=016
FilterUp4 = 1kHz, ParaCode=004
FilterUp5 = 5kHz, ParaCode=017
FilterUp6 = 10kHz, ParaCode=002
FilterUp7 = 50kHz, ParaCode=014
FilterUp8 = PASS, ParaCode=001
;电流辅助通道
[AcquisitionChannelType20]
ChannelName = DH_AD1_SUB
AcqTypeID = 004
AcqVersion = 5
;低通滤波器0x04
FilterUpCount = 9
FilterUpDefault = 8
FilterUp0 = 10Hz, ParaCode=008
FilterUp1 = 50Hz, ParaCode=032
FilterUp2 = 100Hz, ParaCode=006
FilterUp3 = 500Hz, ParaCode=016
FilterUp4 = 1kHz, ParaCode=004
FilterUp5 = 5kHz, ParaCode=017
FilterUp6 = 10kHz, ParaCode=002
FilterUp7 = 50kHz, ParaCode=014
FilterUp8 = PASS, ParaCode=001
;信号源通道
[AcquisitionChannelType21]
ChannelName = DH_SIGNAL_8档_7003
;信号源
AcqTypeID = 001
AcqVersion = 6
FilterUpCount = 9
FilterUpDefault = 8
FilterUp0 = 10Hz, ParaCode=008
FilterUp1 = 50Hz, ParaCode=032
FilterUp2 = 100Hz, ParaCode=006
FilterUp3 = 500Hz, ParaCode=016
FilterUp4 = 1kHz, ParaCode=004
FilterUp5 = 5kHz, ParaCode=017
FilterUp6 = 10kHz, ParaCode=002
FilterUp7 = 50kHz, ParaCode=014
FilterUp8 = PASS, ParaCode=001
;恒流输出0x9d
FullValueCount = 8
FullValue0 = 1000mA,ParaCode=009
FullValue1 = 100mA,ParaCode=008
FullValue2 = 10mA,ParaCode=007
FullValue3 = 1mA,ParaCode=006
FullValue4 = 0.1mA,ParaCode=005
FullValue5 = 0.01mA,ParaCode=004
FullValue6 = 0.001mA,ParaCode=003
FullValue7 = 0.0001mA,ParaCode=002
CircuitType0_RCount = 0 ;电阻计算
CircuitType1_RCount = 8
CircuitType1_R0 = 1
CircuitType1_R1 = 10
CircuitType1_R2 = 100
CircuitType1_R3 = 1000
CircuitType1_R4 = 10000
CircuitType1_R5 = 100000
CircuitType1_R6 = 1000000
CircuitType1_R7 = 10000000
;数采通道1 电压 +DSP
[AcquisitionChannelType22]
ChannelName = DH_AD0_7003
;电压(采R极电势)
AcqTypeID = 002
;通道总数 = 4
AcqVersion = 6
;电压档位(大小均有)
FullValueCount = 3
FullValue0 = 10000mV,ParaCode=001
FullValue1 = 1000mV,ParaCode=004
FullValue2 = 100mV,ParaCode=007
;超过ReplaceCurrent替换FullValue参数码
;UseReplaceFullValue = 1
;ReplaceCurrent = 0.01mA
;ReplaceFullValueCount = 3
;ReplaceFullValue0 = 10000mV,ParaCode=001
;ReplaceFullValue1 = 1000mV,ParaCode=004
;ReplaceFullValue2 = 100mV,ParaCode=007
;低通滤波器0x04
FilterUpCount = 9
FilterUpDefault = 8
FilterUp0 = 10Hz, ParaCode=008
FilterUp1 = 50Hz, ParaCode=032
FilterUp2 = 100Hz, ParaCode=006
FilterUp3 = 500Hz, ParaCode=016
FilterUp4 = 1kHz, ParaCode=004
FilterUp5 = 5kHz, ParaCode=017
FilterUp6 = 10kHz, ParaCode=002
FilterUp7 = 50kHz, ParaCode=014
FilterUp8 = PASS, ParaCode=001
;ElectrodeCount = 2
;Electrode0 = 0, ParaCode=000
;Electrode1 = 1, ParaCode=001
;ECReactiveCount = 2
;ECReactive0 = 0, ParaCode=000
;ECReactive1 = 1, ParaCode=001
;恒压恒流类型0x9a
ECCircuitCount = 2
ECCircuit0 = 0, ParaCode=000
ECCircuit1 = 1, ParaCode=001
;电解池类型0x9b
;ElectrolyticCellTypeCount = 2
;外部电解池
;ElectrolyticCellType0 = 0, ParaCode=001
;内部电解池
;ElectrolyticCellType1 = 1, ParaCode=000
;电解池开关0x9c
ElectrolyticCellOnOffCount = 3
;电解池关(外部)
ElectrolyticCellOnOff0 = 0, ParaCode=000
;电解池开(外部)
ElectrolyticCellOnOff1 = 1, ParaCode=001
;开路电位电解池开
ElectrolyticCellOnOff2 = 2, ParaCode=002
;电流(恒压源实验采W极输出的电流，恒流源实验采C极输出的电流)电流 量程+滤波 +DSP
[AcquisitionChannelType23]
ChannelName = DH_AD1_7003
AcqTypeID = 003
;通道总数 = 4
AcqVersion = 6
;恒流输出0x9d
FullValueCount = 11
FullValue0 = 1000mA,ParaCode=010
FullValue1 = 100mA,ParaCode=009
FullValue2 = 10mA,ParaCode=008
FullValue3 = 1mA,ParaCode=007
FullValue4 = 0.1mA,ParaCode=006
FullValue5 = 0.01mA,ParaCode=005
FullValue6 = 0.001mA,ParaCode=004
FullValue7 = 0.0001mA,ParaCode=003
FullValue8 = 0.00001mA,ParaCode=002
FullValue9 = 0.000001mA,ParaCode=001
FullValue10 = 1000000mA,ParaCode=255
;低通滤波器0x04
FilterUpCount = 9
FilterUpDefault = 8
FilterUp0 = 10Hz, ParaCode=008
FilterUp1 = 50Hz, ParaCode=032
FilterUp2 = 100Hz, ParaCode=006
FilterUp3 = 500Hz, ParaCode=016
FilterUp4 = 1kHz, ParaCode=004
FilterUp5 = 5kHz, ParaCode=017
FilterUp6 = 10kHz, ParaCode=002
FilterUp7 = 50kHz, ParaCode=014
FilterUp8 = PASS, ParaCode=001
;电流辅助通道
[AcquisitionChannelType24]
ChannelName = DH_AD1_SUB_7003
AcqTypeID = 004
AcqVersion = 6
;低通滤波器0x04
FilterUpCount = 9
FilterUpDefault = 8
FilterUp0 = 10Hz, ParaCode=008
FilterUp1 = 50Hz, ParaCode=032
FilterUp2 = 100Hz, ParaCode=006
FilterUp3 = 500Hz, ParaCode=016
FilterUp4 = 1kHz, ParaCode=004
FilterUp5 = 5kHz, ParaCode=017
FilterUp6 = 10kHz, ParaCode=002
FilterUp7 = 50kHz, ParaCode=014
FilterUp8 = PASS, ParaCode=001
;信号源通道
[AcquisitionChannelType25]
ChannelName = DH_SIGNAL_8档_7003_2
;信号源
AcqTypeID = 001
AcqVersion = 7
FilterUpCount = 9
FilterUpDefault = 8
FilterUp0 = 10Hz, ParaCode=008
FilterUp1 = 50Hz, ParaCode=032
FilterUp2 = 100Hz, ParaCode=006
FilterUp3 = 500Hz, ParaCode=016
FilterUp4 = 1kHz, ParaCode=004
FilterUp5 = 5kHz, ParaCode=017
FilterUp6 = 10kHz, ParaCode=002
FilterUp7 = 50kHz, ParaCode=014
FilterUp8 = PASS, ParaCode=001
;恒流输出0x9d
FullValueCount = 9
FullValue0 = 2000mA,ParaCode=010
FullValue1 = 1000mA,ParaCode=009
FullValue2 = 100mA,ParaCode=008
FullValue3 = 10mA,ParaCode=007
FullValue4 = 1mA,ParaCode=006
FullValue5 = 0.1mA,ParaCode=005
FullValue6 = 0.01mA,ParaCode=004
FullValue7 = 0.001mA,ParaCode=003
FullValue8 = 0.0001mA,ParaCode=002
CircuitType0_RCount = 0 ;电阻计算
CircuitType1_RCount = 9
CircuitType1_R0 = 1
CircuitType1_R1 = 1
CircuitType1_R2 = 10
CircuitType1_R3 = 100
CircuitType1_R4 = 1000
CircuitType1_R5 = 10000
CircuitType1_R6 = 100000
CircuitType1_R7 = 1000000
CircuitType1_R8 = 10000000
;数采通道1 电压 +DSP
[AcquisitionChannelType26]
ChannelName = DH_AD0_7003_2
;电压(采R极电势)
AcqTypeID = 002
;通道总数 = 4
AcqVersion = 7
;电压档位(大小均有)
FullValueCount = 3
FullValue0 = 10000mV,ParaCode=001
FullValue1 = 1000mV,ParaCode=004
FullValue2 = 100mV,ParaCode=007
;超过ReplaceCurrent替换FullValue参数码
;UseReplaceFullValue = 1
;ReplaceCurrent = 0.01mA
;ReplaceFullValueCount = 3
;ReplaceFullValue0 = 10000mV,ParaCode=001
;ReplaceFullValue1 = 1000mV,ParaCode=004
;ReplaceFullValue2 = 100mV,ParaCode=007
;低通滤波器0x04
FilterUpCount = 9
FilterUpDefault = 8
FilterUp0 = 10Hz, ParaCode=008
FilterUp1 = 50Hz, ParaCode=032
FilterUp2 = 100Hz, ParaCode=006
FilterUp3 = 500Hz, ParaCode=016
FilterUp4 = 1kHz, ParaCode=004
FilterUp5 = 5kHz, ParaCode=017
FilterUp6 = 10kHz, ParaCode=002
FilterUp7 = 50kHz, ParaCode=014
FilterUp8 = PASS, ParaCode=001
;ElectrodeCount = 2
;Electrode0 = 0, ParaCode=000
;Electrode1 = 1, ParaCode=001
;ECReactiveCount = 2
;ECReactive0 = 0, ParaCode=000
;ECReactive1 = 1, ParaCode=001
;恒压恒流类型0x9a
ECCircuitCount = 2
ECCircuit0 = 0, ParaCode=000
ECCircuit1 = 1, ParaCode=001
;电解池类型0x9b
;ElectrolyticCellTypeCount = 2
;外部电解池
;ElectrolyticCellType0 = 0, ParaCode=001
;内部电解池
;ElectrolyticCellType1 = 1, ParaCode=000
;电解池开关0x9c
ElectrolyticCellOnOffCount = 3
;电解池关(外部)
ElectrolyticCellOnOff0 = 0, ParaCode=000
;电解池开(外部)
ElectrolyticCellOnOff1 = 1, ParaCode=001
;开路电位电解池开
ElectrolyticCellOnOff2 = 2, ParaCode=002
;电流(恒压源实验采W极输出的电流，恒流源实验采C极输出的电流)电流 量程+滤波 +DSP
[AcquisitionChannelType27]
ChannelName = DH_AD1_7003_2
AcqTypeID = 003
;通道总数 = 4
AcqVersion = 7
;恒流输出0x9d
FullValueCount = 12
FullValue0 = 2000mA,ParaCode=011
FullValue1 = 1000mA,ParaCode=010
FullValue2 = 100mA,ParaCode=009
FullValue3 = 10mA,ParaCode=008
FullValue4 = 1mA,ParaCode=007
FullValue5 = 0.1mA,ParaCode=006
FullValue6 = 0.01mA,ParaCode=005
FullValue7 = 0.001mA,ParaCode=004
FullValue8 = 0.0001mA,ParaCode=003
FullValue9 = 0.00001mA,ParaCode=002
FullValue10 = 0.000001mA,ParaCode=001
FullValue11 = 1000000mA,ParaCode=255
;低通滤波器0x04
FilterUpCount = 9
FilterUpDefault = 8
FilterUp0 = 10Hz, ParaCode=008
FilterUp1 = 50Hz, ParaCode=032
FilterUp2 = 100Hz, ParaCode=006
FilterUp3 = 500Hz, ParaCode=016
FilterUp4 = 1kHz, ParaCode=004
FilterUp5 = 5kHz, ParaCode=017
FilterUp6 = 10kHz, ParaCode=002
FilterUp7 = 50kHz, ParaCode=014
FilterUp8 = PASS, ParaCode=001
;电流辅助通道
[AcquisitionChannelType28]
ChannelName = DH_AD1_SUB_7003_2
AcqTypeID = 004
AcqVersion = 7
;低通滤波器0x04
FilterUpCount = 9
FilterUpDefault = 8
FilterUp0 = 10Hz, ParaCode=008
FilterUp1 = 50Hz, ParaCode=032
FilterUp2 = 100Hz, ParaCode=006
FilterUp3 = 500Hz, ParaCode=016
FilterUp4 = 1kHz, ParaCode=004
FilterUp5 = 5kHz, ParaCode=017
FilterUp6 = 10kHz, ParaCode=002
FilterUp7 = 50kHz, ParaCode=014
FilterUp8 = PASS, ParaCode=001
;信号源通道
[AcquisitionChannelType29]
ChannelName = DH_SIGNAL_8档_7000_1
;信号源
WaitTime=300
AcqTypeID = 001
AcqVersion = 9
FilterUpCount = 9
FilterUpDefault = 8
FilterUp0 = 10Hz, ParaCode=008
FilterUp1 = 50Hz, ParaCode=032
FilterUp2 = 100Hz, ParaCode=006
FilterUp3 = 500Hz, ParaCode=016
FilterUp4 = 1kHz, ParaCode=004
FilterUp5 = 5kHz, ParaCode=017
FilterUp6 = 10kHz, ParaCode=002
FilterUp7 = 50kHz, ParaCode=014
FilterUp8 = PASS, ParaCode=001
;恒流输出0x9d
FullValueCount = 8
FullValue0 = 1000mA,ParaCode=009
FullValue1 = 100mA,ParaCode=008
FullValue2 = 10mA,ParaCode=007
FullValue3 = 1mA,ParaCode=006
FullValue4 = 0.1mA,ParaCode=005
FullValue5 = 0.01mA,ParaCode=004
FullValue6 = 0.001mA,ParaCode=003
FullValue7 = 0.0001mA,ParaCode=002
CircuitType0_RCount = 0 ;电阻计算
CircuitType1_RCount = 8
CircuitType1_R0 = 1
CircuitType1_R1 = 10
CircuitType1_R2 = 100
CircuitType1_R3 = 1000
CircuitType1_R4 = 10000
CircuitType1_R5 = 100000
CircuitType1_R6 = 1000000
CircuitType1_R7 = 10000000
;数采通道1 电压 +DSP
[AcquisitionChannelType30]
ChannelName = DH_AD0_7000_1
;电压(采R极电势)
AcqTypeID = 002
;通道总数 = 4
AcqVersion = 9
;电压档位(大小均有)
FullValueCount = 3
FullValue0 = 10000mV,ParaCode=001
FullValue1 = 1000mV,ParaCode=004
FullValue2 = 100mV,ParaCode=007
;超过ReplaceCurrent替换FullValue参数码
;UseReplaceFullValue = 1
;ReplaceCurrent = 0.01mA
;ReplaceFullValueCount = 3
;ReplaceFullValue0 = 10000mV,ParaCode=001
;ReplaceFullValue1 = 1000mV,ParaCode=004
;ReplaceFullValue2 = 100mV,ParaCode=007
;低通滤波器0x04
FilterUpCount = 9
FilterUpDefault = 8
FilterUp0 = 10Hz, ParaCode=008
FilterUp1 = 50Hz, ParaCode=032
FilterUp2 = 100Hz, ParaCode=006
FilterUp3 = 500Hz, ParaCode=016
FilterUp4 = 1kHz, ParaCode=004
FilterUp5 = 5kHz, ParaCode=017
FilterUp6 = 10kHz, ParaCode=002
FilterUp7 = 50kHz, ParaCode=014
FilterUp8 = PASS, ParaCode=001
;ElectrodeCount = 2
;Electrode0 = 0, ParaCode=000
;Electrode1 = 1, ParaCode=001
;ECReactiveCount = 2
;ECReactive0 = 0, ParaCode=000
;ECReactive1 = 1, ParaCode=001
;恒压恒流类型0x9a
ECCircuitCount = 2
ECCircuit0 = 0, ParaCode=000
ECCircuit1 = 1, ParaCode=001
;电解池类型0x9b
;ElectrolyticCellTypeCount = 2
;外部电解池
;ElectrolyticCellType0 = 0, ParaCode=001
;内部电解池
;ElectrolyticCellType1 = 1, ParaCode=000
;电解池开关0x9c
ElectrolyticCellOnOffCount = 3
;电解池关(外部)
ElectrolyticCellOnOff0 = 0, ParaCode=000
;电解池开(外部)
ElectrolyticCellOnOff1 = 1, ParaCode=001
;开路电位电解池开
ElectrolyticCellOnOff2 = 2, ParaCode=002
;电流(恒压源实验采W极输出的电流，恒流源实验采C极输出的电流)电流 量程+滤波 +DSP
[AcquisitionChannelType31]
ChannelName = DH_AD1_7000_1
AcqTypeID = 003
;通道总数 = 4
AcqVersion = 9
;恒流输出0x9d
FullValueCount = 11
FullValue0 = 1000mA,ParaCode=010
FullValue1 = 100mA,ParaCode=009
FullValue2 = 10mA,ParaCode=008
FullValue3 = 1mA,ParaCode=007
FullValue4 = 0.1mA,ParaCode=006
FullValue5 = 0.01mA,ParaCode=005
FullValue6 = 0.001mA,ParaCode=004
FullValue7 = 0.0001mA,ParaCode=003
FullValue8 = 0.00001mA,ParaCode=002
FullValue9 = 0.000001mA,ParaCode=001
FullValue10 = 1000000mA,ParaCode=255
;低通滤波器0x04
FilterUpCount = 9
FilterUpDefault = 8
FilterUp0 = 10Hz, ParaCode=008
FilterUp1 = 50Hz, ParaCode=032
FilterUp2 = 100Hz, ParaCode=006
FilterUp3 = 500Hz, ParaCode=016
FilterUp4 = 1kHz, ParaCode=004
FilterUp5 = 5kHz, ParaCode=017
FilterUp6 = 10kHz, ParaCode=002
FilterUp7 = 50kHz, ParaCode=014
FilterUp8 = PASS, ParaCode=001
;电流辅助通道
[AcquisitionChannelType32]
ChannelName = DH_AD1_SUB_7000_1
AcqTypeID = 004
AcqVersion = 9
;低通滤波器0x04
FilterUpCount = 9
FilterUpDefault = 8
FilterUp0 = 10Hz, ParaCode=008
FilterUp1 = 50Hz, ParaCode=032
FilterUp2 = 100Hz, ParaCode=006
FilterUp3 = 500Hz, ParaCode=016
FilterUp4 = 1kHz, ParaCode=004
FilterUp5 = 5kHz, ParaCode=017
FilterUp6 = 10kHz, ParaCode=002
FilterUp7 = 50kHz, ParaCode=014
FilterUp8 = PASS, ParaCode=001
;电流辅助通道
[AcquisitionChannelType33]
ChannelName = DH_AD1_SUB_7000_调理器
AcqTypeID = 005
AcqVersion = 0
;恒流输出0x9d
FullValueCount = 1
FullValue0 = 10000mV,ParaCode=001
;信号源通道
[AcquisitionChannelType34]
ChannelName = DH_SIGNAL_9档_7005
;信号源
AcqTypeID = 001
AcqVersion = 10
FilterUpCount = 9
FilterUpDefault = 8
FilterUp0 = 10Hz, ParaCode=008
FilterUp1 = 50Hz, ParaCode=032
FilterUp2 = 100Hz, ParaCode=006
FilterUp3 = 500Hz, ParaCode=016
FilterUp4 = 1kHz, ParaCode=004
FilterUp5 = 5kHz, ParaCode=017
FilterUp6 = 10kHz, ParaCode=002
FilterUp7 = 50kHz, ParaCode=014
FilterUp8 = PASS, ParaCode=001
;恒流输出0x9d
FullValueCount = 9
FullValue0 = 4000mA,ParaCode=012
FullValue1 = 1000mA,ParaCode=010
FullValue2 = 100mA,ParaCode=009
FullValue3 = 10mA,ParaCode=008
FullValue4 = 1mA,ParaCode=007
FullValue5 = 0.1mA,ParaCode=006
FullValue6 = 0.01mA,ParaCode=005
FullValue7 = 0.001mA,ParaCode=004
FullValue8 = 0.0001mA,ParaCode=003
CircuitType0_RCount = 0 ;电阻计算
CircuitType1_RCount = 9
CircuitType1_R0 = 0.5
CircuitType1_R1 = 1
CircuitType1_R2 = 10
CircuitType1_R3 = 100
CircuitType1_R4 = 1000
CircuitType1_R5 = 10000
CircuitType1_R6 = 100000
CircuitType1_R7 = 1000000
CircuitType1_R8 = 10000000
;数采通道1 电压 +DSP
[AcquisitionChannelType35]
ChannelName = DH_AD0_7005
;电压(采R极电势)
AcqTypeID = 002
;通道总数 = 4
AcqVersion = 10
;电压档位(大小均有)
FullValueCount = 4
FullValue0 = 10000mV,ParaCode=001
FullValue1 = 1000mV,ParaCode=004
FullValue2 = 100mV,ParaCode=007
;外挂10V
FullValue3 = 10000mV,ParaCode=255
;低通滤波器0x04
FilterUpCount = 11
FilterUpDefault = 10
FilterUp0 = 0.1Hz, ParaCode=043
FilterUp1 = 1Hz, ParaCode=010
FilterUp2 = 10Hz, ParaCode=008
FilterUp3 = 50Hz, ParaCode=032
FilterUp4 = 100Hz, ParaCode=006
FilterUp5 = 500Hz, ParaCode=016
FilterUp6 = 1kHz, ParaCode=004
FilterUp7 = 5kHz, ParaCode=017
FilterUp8 = 10kHz, ParaCode=002
FilterUp9 = 50kHz, ParaCode=014
FilterUp10 = PASS, ParaCode=001
;恒压恒流类型0x9a
ECCircuitCount = 3
ECCircuit0 = 0, ParaCode=000
ECCircuit1 = 1, ParaCode=001
;脉冲+正弦
ECCircuit2 = 2, ParaCode=002
;电解池开关0x9c
ElectrolyticCellOnOffCount = 3
;电解池关(外部)
ElectrolyticCellOnOff0 = 0, ParaCode=000
;电解池开(外部)
ElectrolyticCellOnOff1 = 1, ParaCode=001
;开路电位电解池开
ElectrolyticCellOnOff2 = 2, ParaCode=002
;电流(恒压源实验采W极输出的电流，恒流源实验采C极输出的电流)电流 量程+滤波 +DSP
[AcquisitionChannelType36]
ChannelName = DH_AD1_7005
AcqTypeID = 003
;通道总数 = 4
AcqVersion = 10
;恒流输出0x9d
FullValueCount = 15
FullValue0 = 4000mA,ParaCode=012
FullValue1 = 1000mA,ParaCode=010
FullValue2 = 100mA,ParaCode=009
FullValue3 = 10mA,ParaCode=008
FullValue4 = 1mA,ParaCode=007
FullValue5 = 0.1mA,ParaCode=006
FullValue6 = 0.01mA,ParaCode=005
FullValue7 = 0.001mA,ParaCode=004
FullValue8 = 0.0001mA,ParaCode=003
FullValue9 = 0.00001mA,ParaCode=002
FullValue10 = 0.000001mA,ParaCode=001
FullValue11 = 0.0000001mA,ParaCode=000
FullValue12 = 0.00000001mA,ParaCode=017
FullValue13 = 1000000mA,ParaCode=255
;外挂1A
FullValue14 = 1000mA,ParaCode=016
;低通滤波器0x04
FilterUpCount = 11
FilterUpDefault = 10
FilterUp0 = 0.1Hz, ParaCode=043
FilterUp1 = 1Hz, ParaCode=010
FilterUp2 = 10Hz, ParaCode=008
FilterUp3 = 50Hz, ParaCode=032
FilterUp4 = 100Hz, ParaCode=006
FilterUp5 = 500Hz, ParaCode=016
FilterUp6 = 1kHz, ParaCode=004
FilterUp7 = 5kHz, ParaCode=017
FilterUp8 = 10kHz, ParaCode=002
FilterUp9 = 50kHz, ParaCode=014
FilterUp10 = PASS, ParaCode=001
;电流辅助通道
[AcquisitionChannelType37]
ChannelName = DH_AD1_SUB_7005
AcqTypeID = 004
AcqVersion = 10
;低通滤波器0x04
FilterUpCount = 11
FilterUpDefault = 10
FilterUp0 = 0.1Hz, ParaCode=043
FilterUp1 = 1Hz, ParaCode=010
FilterUp2 = 10Hz, ParaCode=008
FilterUp3 = 50Hz, ParaCode=032
FilterUp4 = 100Hz, ParaCode=006
FilterUp5 = 500Hz, ParaCode=016
FilterUp6 = 1kHz, ParaCode=004
FilterUp7 = 5kHz, ParaCode=017
FilterUp8 = 10kHz, ParaCode=002
FilterUp9 = 50kHz, ParaCode=014
FilterUp10 = PASS, ParaCode=001
;信号源通道
[AcquisitionChannelType38]
ChannelName = DH_SIGNAL_7003_A
;信号源
AcqTypeID = 001
AcqVersion = 11
FilterUpCount = 9
FilterUpDefault = 8
FilterUp0 = 10Hz, ParaCode=008
FilterUp1 = 50Hz, ParaCode=032
FilterUp2 = 100Hz, ParaCode=006
FilterUp3 = 500Hz, ParaCode=016
FilterUp4 = 1kHz, ParaCode=004
FilterUp5 = 5kHz, ParaCode=017
FilterUp6 = 10kHz, ParaCode=002
FilterUp7 = 50kHz, ParaCode=014
FilterUp8 = PASS, ParaCode=001
;恒流输出0x9d
FullValueCount = 8
FullValue0 = 1000mA,ParaCode=009
FullValue1 = 100mA,ParaCode=008
FullValue2 = 10mA,ParaCode=007
FullValue3 = 1mA,ParaCode=006
FullValue4 = 0.1mA,ParaCode=005
FullValue5 = 0.01mA,ParaCode=004
FullValue6 = 0.001mA,ParaCode=003
FullValue7 = 0.0001mA,ParaCode=002
CircuitType0_RCount = 0 ;电阻计算
CircuitType1_RCount = 8
CircuitType1_R0 = 1
CircuitType1_R1 = 10
CircuitType1_R2 = 100
CircuitType1_R3 = 1000
CircuitType1_R4 = 10000
CircuitType1_R5 = 100000
CircuitType1_R6 = 1000000
CircuitType1_R7 = 10000000
;数采通道1 电压 +DSP
[AcquisitionChannelType39]
ChannelName = DH_AD0_7003_A
;电压(采R极电势)
AcqTypeID = 002
;通道总数 = 4
AcqVersion = 11
;电压档位(大小均有)
FullValueCount = 3
FullValue0 = 10000mV,ParaCode=001
FullValue1 = 1000mV,ParaCode=004
FullValue2 = 100mV,ParaCode=007
;超过ReplaceCurrent替换FullValue参数码
;UseReplaceFullValue = 1
;ReplaceCurrent = 0.01mA
;ReplaceFullValueCount = 3
;ReplaceFullValue0 = 10000mV,ParaCode=001
;ReplaceFullValue1 = 1000mV,ParaCode=004
;ReplaceFullValue2 = 100mV,ParaCode=007
;低通滤波器0x04
FilterUpCount = 9
FilterUpDefault = 8
FilterUp0 = 10Hz, ParaCode=008
FilterUp1 = 50Hz, ParaCode=032
FilterUp2 = 100Hz, ParaCode=006
FilterUp3 = 500Hz, ParaCode=016
FilterUp4 = 1kHz, ParaCode=004
FilterUp5 = 5kHz, ParaCode=017
FilterUp6 = 10kHz, ParaCode=002
FilterUp7 = 50kHz, ParaCode=014
FilterUp8 = PASS, ParaCode=001
;恒压恒流类型0x9a
ECCircuitCount = 2
ECCircuit0 = 0, ParaCode=000
ECCircuit1 = 1, ParaCode=001
;电解池开关0x9c
ElectrolyticCellOnOffCount = 3
;电解池关(外部)
ElectrolyticCellOnOff0 = 0, ParaCode=000
;电解池开(外部)
ElectrolyticCellOnOff1 = 1, ParaCode=001
;开路电位电解池开
ElectrolyticCellOnOff2 = 2, ParaCode=002
;电流(恒压源实验采W极输出的电流，恒流源实验采C极输出的电流)电流 量程+滤波 +DSP
[AcquisitionChannelType40]
ChannelName = DH_AD1_7000_1
AcqTypeID = 003
;通道总数 = 4
AcqVersion = 11
;恒流输出0x9d
FullValueCount = 14
FullValue0 = 1000mA,ParaCode=010
FullValue1 = 100mA,ParaCode=009
FullValue2 = 10mA,ParaCode=008
FullValue3 = 1mA,ParaCode=007
FullValue4 = 0.1mA,ParaCode=006
FullValue5 = 0.01mA,ParaCode=005
FullValue6 = 0.001mA,ParaCode=004
FullValue7 = 0.0001mA,ParaCode=003
FullValue8 = 0.00001mA,ParaCode=002
FullValue9 = 0.000001mA,ParaCode=001
FullValue10 = 0.0000001mA,ParaCode=000
FullValue11 = 0.00000001mA,ParaCode=021
FullValue12 = 0.000000001mA,ParaCode=020
FullValue13 = 1000000mA,ParaCode=255
;低通滤波器0x04
FilterUpCount = 9
FilterUpDefault = 8
FilterUp0 = 10Hz, ParaCode=008
FilterUp1 = 50Hz, ParaCode=032
FilterUp2 = 100Hz, ParaCode=006
FilterUp3 = 500Hz, ParaCode=016
FilterUp4 = 1kHz, ParaCode=004
FilterUp5 = 5kHz, ParaCode=017
FilterUp6 = 10kHz, ParaCode=002
FilterUp7 = 50kHz, ParaCode=014
FilterUp8 = PASS, ParaCode=001
;电流辅助通道
[AcquisitionChannelType41]
ChannelName = DH_AD1_SUB_7003_A
AcqTypeID = 004
AcqVersion = 11
;低通滤波器0x04
FilterUpCount = 9
FilterUpDefault = 8
FilterUp0 = 10Hz, ParaCode=008
FilterUp1 = 50Hz, ParaCode=032
FilterUp2 = 100Hz, ParaCode=006
FilterUp3 = 500Hz, ParaCode=016
FilterUp4 = 1kHz, ParaCode=004
FilterUp5 = 5kHz, ParaCode=017
FilterUp6 = 10kHz, ParaCode=002
FilterUp7 = 50kHz, ParaCode=014
FilterUp8 = PASS, ParaCode=001
;信号源通道
[AcquisitionChannelType42]
ChannelName = DH_SIGNAL_9档_7000_C
;信号源
AcqTypeID = 001
AcqVersion = 12
FilterUpCount = 9
FilterUpDefault = 8
FilterUp0 = 10Hz, ParaCode=008
FilterUp1 = 50Hz, ParaCode=032
FilterUp2 = 100Hz, ParaCode=006
FilterUp3 = 500Hz, ParaCode=016
FilterUp4 = 1kHz, ParaCode=004
FilterUp5 = 5kHz, ParaCode=017
FilterUp6 = 10kHz, ParaCode=002
FilterUp7 = 50kHz, ParaCode=014
FilterUp8 = PASS, ParaCode=001
;恒流输出0x9d
FullValueCount = 8
FullValue0 = 1000mA,ParaCode=010
FullValue1 = 100mA,ParaCode=009
FullValue2 = 10mA,ParaCode=008
FullValue3 = 1mA,ParaCode=007
FullValue4 = 0.1mA,ParaCode=006
FullValue5 = 0.01mA,ParaCode=005
FullValue6 = 0.001mA,ParaCode=004
FullValue7 = 0.0001mA,ParaCode=003
CircuitType0_RCount = 0 ;电阻计算
CircuitType1_RCount = 8
CircuitType1_R0 = 1
CircuitType1_R1 = 10
CircuitType1_R2 = 100
CircuitType1_R3 = 1000
CircuitType1_R4 = 10000
CircuitType1_R5 = 100000
CircuitType1_R6 = 1000000
CircuitType1_R7 = 10000000
;数采通道1 电压 +DSP
[AcquisitionChannelType43]
ChannelName = DH_AD0_7000_C
;电压(采R极电势)
AcqTypeID = 002
;通道总数 = 4
AcqVersion = 12
;电压档位(大小均有)
FullValueCount = 4
FullValue0 = 10000mV,ParaCode=001
FullValue1 = 1000mV,ParaCode=004
FullValue2 = 100mV,ParaCode=007
;低通滤波器0x04
FilterUpCount = 9
FilterUpDefault = 8
FilterUp0 = 10Hz, ParaCode=008
FilterUp1 = 50Hz, ParaCode=032
FilterUp2 = 100Hz, ParaCode=006
FilterUp3 = 500Hz, ParaCode=016
FilterUp4 = 1kHz, ParaCode=004
FilterUp5 = 5kHz, ParaCode=017
FilterUp6 = 10kHz, ParaCode=002
FilterUp7 = 50kHz, ParaCode=014
FilterUp8 = PASS, ParaCode=001
;恒压恒流类型0x9a
ECCircuitCount = 3
ECCircuit0 = 0, ParaCode=000
ECCircuit1 = 1, ParaCode=001
;脉冲+正弦
ECCircuit2 = 2, ParaCode=002
;电解池开关0x9c
ElectrolyticCellOnOffCount = 3
;电解池关(外部)
ElectrolyticCellOnOff0 = 0, ParaCode=000
;电解池开(外部)
ElectrolyticCellOnOff1 = 1, ParaCode=001
;开路电位电解池开
ElectrolyticCellOnOff2 = 2, ParaCode=002
;电流(恒压源实验采W极输出的电流，恒流源实验采C极输出的电流)电流 量程+滤波 +DSP
[AcquisitionChannelType44]
ChannelName = DH_AD1_7000_C
AcqTypeID = 003
;通道总数 = 4
AcqVersion = 12
;恒流输出0x9d
FullValueCount = 11
FullValue0 = 1000mA,ParaCode=010
FullValue1 = 100mA,ParaCode=009
FullValue2 = 10mA,ParaCode=008
FullValue3 = 1mA,ParaCode=007
FullValue4 = 0.1mA,ParaCode=006
FullValue5 = 0.01mA,ParaCode=005
FullValue6 = 0.001mA,ParaCode=004
FullValue7 = 0.0001mA,ParaCode=003
FullValue8 = 0.00001mA,ParaCode=002
FullValue9 = 0.000001mA,ParaCode=001
FullValue10 = 1000000mA,ParaCode=255
;低通滤波器0x04
FilterUpCount = 9
FilterUpDefault = 8
FilterUp0 = 10Hz, ParaCode=008
FilterUp1 = 50Hz, ParaCode=032
FilterUp2 = 100Hz, ParaCode=006
FilterUp3 = 500Hz, ParaCode=016
FilterUp4 = 1kHz, ParaCode=004
FilterUp5 = 5kHz, ParaCode=017
FilterUp6 = 10kHz, ParaCode=002
FilterUp7 = 50kHz, ParaCode=014
FilterUp8 = PASS, ParaCode=001
;电流辅助通道
[AcquisitionChannelType45]
ChannelName = DH_AD1_SUB_7000_C
AcqTypeID = 004
AcqVersion = 12
;低通滤波器0x04
FilterUpCount = 9
FilterUpDefault = 8
FilterUp0 = 10Hz, ParaCode=008
FilterUp1 = 50Hz, ParaCode=032
FilterUp2 = 100Hz, ParaCode=006
FilterUp3 = 500Hz, ParaCode=016
FilterUp4 = 1kHz, ParaCode=004
FilterUp5 = 5kHz, ParaCode=017
FilterUp6 = 10kHz, ParaCode=002
FilterUp7 = 50kHz, ParaCode=014
FilterUp8 = PASS, ParaCode=001
;信号源通道
[AcquisitionChannelType46]
ChannelName = DH_SIGNAL_9档_7001_A
;信号源
AcqTypeID = 001
AcqVersion = 13
FilterUpCount = 9
FilterUpDefault = 8
FilterUp0 = 10Hz, ParaCode=008
FilterUp1 = 50Hz, ParaCode=032
FilterUp2 = 100Hz, ParaCode=006
FilterUp3 = 500Hz, ParaCode=016
FilterUp4 = 1kHz, ParaCode=004
FilterUp5 = 5kHz, ParaCode=017
FilterUp6 = 10kHz, ParaCode=002
FilterUp7 = 50kHz, ParaCode=014
FilterUp8 = PASS, ParaCode=001
;恒流输出0x9d
FullValueCount = 9
FullValue0 = 2000mA,ParaCode=011
FullValue1 = 1000mA,ParaCode=010
FullValue2 = 100mA,ParaCode=009
FullValue3 = 10mA,ParaCode=008
FullValue4 = 1mA,ParaCode=007
FullValue5 = 0.1mA,ParaCode=006
FullValue6 = 0.01mA,ParaCode=005
FullValue7 = 0.001mA,ParaCode=004
FullValue8 = 0.0001mA,ParaCode=003
CircuitType0_RCount = 0 ;电阻计算
CircuitType1_RCount = 9
CircuitType1_R0 = 0.5
CircuitType1_R1 = 1
CircuitType1_R2 = 10
CircuitType1_R3 = 100
CircuitType1_R4 = 1000
CircuitType1_R5 = 10000
CircuitType1_R6 = 100000
CircuitType1_R7 = 1000000
CircuitType1_R8 = 10000000
;数采通道1 电压 +DSP
[AcquisitionChannelType47]
ChannelName = DH_AD0_7001_A
;电压(采R极电势)
AcqTypeID = 002
;通道总数 = 4
AcqVersion = 13
;电压档位(大小均有)
FullValueCount = 4
FullValue0 = 10000mV,ParaCode=001
FullValue1 = 1000mV,ParaCode=004
FullValue2 = 100mV,ParaCode=007
;低通滤波器0x04
FilterUpCount = 9
FilterUpDefault = 8
FilterUp0 = 10Hz, ParaCode=008
FilterUp1 = 50Hz, ParaCode=032
FilterUp2 = 100Hz, ParaCode=006
FilterUp3 = 500Hz, ParaCode=016
FilterUp4 = 1kHz, ParaCode=004
FilterUp5 = 5kHz, ParaCode=017
FilterUp6 = 10kHz, ParaCode=002
FilterUp7 = 50kHz, ParaCode=014
FilterUp8 = PASS, ParaCode=001
;恒压恒流类型0x9a
ECCircuitCount = 3
ECCircuit0 = 0, ParaCode=000
ECCircuit1 = 1, ParaCode=001
;脉冲+正弦
ECCircuit2 = 2, ParaCode=002
;电解池开关0x9c
ElectrolyticCellOnOffCount = 3
;电解池关(外部)
ElectrolyticCellOnOff0 = 0, ParaCode=000
;电解池开(外部)
ElectrolyticCellOnOff1 = 1, ParaCode=001
;开路电位电解池开
ElectrolyticCellOnOff2 = 2, ParaCode=002
;电流(恒压源实验采W极输出的电流，恒流源实验采C极输出的电流)电流 量程+滤波 +DSP
[AcquisitionChannelType48]
ChannelName = DH_AD1_7001_A
AcqTypeID = 003
;通道总数 = 4
AcqVersion = 13
;恒流输出0x9d
FullValueCount = 13
FullValue0 = 2000mA,ParaCode=011
FullValue1 = 1000mA,ParaCode=010
FullValue2 = 100mA,ParaCode=009
FullValue3 = 10mA,ParaCode=008
FullValue4 = 1mA,ParaCode=007
FullValue5 = 0.1mA,ParaCode=006
FullValue6 = 0.01mA,ParaCode=005
FullValue7 = 0.001mA,ParaCode=004
FullValue8 = 0.0001mA,ParaCode=003
FullValue9 = 0.00001mA,ParaCode=002
FullValue10 = 0.000001mA,ParaCode=001
FullValue11 = 0.0000001mA,ParaCode=000
FullValue12 = 1000000mA,ParaCode=255
;低通滤波器0x04
FilterUpCount = 9
FilterUpDefault = 8
FilterUp0 = 10Hz, ParaCode=008
FilterUp1 = 50Hz, ParaCode=032
FilterUp2 = 100Hz, ParaCode=006
FilterUp3 = 500Hz, ParaCode=016
FilterUp4 = 1kHz, ParaCode=004
FilterUp5 = 5kHz, ParaCode=017
FilterUp6 = 10kHz, ParaCode=002
FilterUp7 = 50kHz, ParaCode=014
FilterUp8 = PASS, ParaCode=001
;电流辅助通道
[AcquisitionChannelType49]
ChannelName = DH_AD1_SUB_7001_A
AcqTypeID = 004
AcqVersion = 13
;低通滤波器0x04
FilterUpCount = 9
FilterUpDefault = 8
FilterUp0 = 10Hz, ParaCode=008
FilterUp1 = 50Hz, ParaCode=032
FilterUp2 = 100Hz, ParaCode=006
FilterUp3 = 500Hz, ParaCode=016
FilterUp4 = 1kHz, ParaCode=004
FilterUp5 = 5kHz, ParaCode=017
FilterUp6 = 10kHz, ParaCode=002
FilterUp7 = 50kHz, ParaCode=014
FilterUp8 = PASS, ParaCode=001
;信号源通道
[AcquisitionChannelType50]
ChannelName = DH_SIGNAL_9档_7002_A
;信号源
AcqTypeID = 001
AcqVersion = 15
FilterUpCount = 9
FilterUpDefault = 8
FilterUp0 = 10Hz, ParaCode=008
FilterUp1 = 50Hz, ParaCode=032
FilterUp2 = 100Hz, ParaCode=006
FilterUp3 = 500Hz, ParaCode=016
FilterUp4 = 1kHz, ParaCode=004
FilterUp5 = 5kHz, ParaCode=017
FilterUp6 = 10kHz, ParaCode=002
FilterUp7 = 50kHz, ParaCode=014
FilterUp8 = PASS, ParaCode=001
;恒流输出0x9d
FullValueCount = 9
FullValue0 = 4000mA,ParaCode=012
FullValue1 = 2000mA,ParaCode=011
FullValue2 = 1000mA,ParaCode=010
FullValue3 = 100mA,ParaCode=009
FullValue4 = 10mA,ParaCode=008
FullValue5 = 1mA,ParaCode=007
FullValue6 = 0.1mA,ParaCode=006
FullValue7 = 0.01mA,ParaCode=005
FullValue8 = 0.001mA,ParaCode=004
;外挂10V，暂时用不到，当功放包含恒流恒压时，才用到
FullValue9 = 10000mV,ParaCode=255
CircuitType0_RCount = 0 ;电阻计算
CircuitType1_RCount = 9
CircuitType1_R0 = 0.5
CircuitType1_R1 = 0.5
CircuitType1_R2 = 1
CircuitType1_R3 = 10
CircuitType1_R4 = 100
CircuitType1_R5 = 1000
CircuitType1_R6 = 10000
CircuitType1_R7 = 100000
CircuitType1_R8 = 1000000
CircuitType1_R9 = 10000000
;数采通道1 电压 +DSP
[AcquisitionChannelType51]
ChannelName = DH_AD0_7002_A
;电压(采R极电势)
AcqTypeID = 002
;通道总数 = 4
AcqVersion = 15
;电压档位(大小均有)
FullValueCount = 4
FullValue0 = 10000mV,ParaCode=001
FullValue1 = 1000mV,ParaCode=004
FullValue2 = 100mV,ParaCode=007
;外挂10V
FullValue3 = 10000mV,ParaCode=255
;低通滤波器0x04
FilterUpCount = 9
FilterUpDefault = 8
FilterUp0 = 10Hz, ParaCode=008
FilterUp1 = 50Hz, ParaCode=032
FilterUp2 = 100Hz, ParaCode=006
FilterUp3 = 500Hz, ParaCode=016
FilterUp4 = 1kHz, ParaCode=004
FilterUp5 = 5kHz, ParaCode=017
FilterUp6 = 10kHz, ParaCode=002
FilterUp7 = 50kHz, ParaCode=014
FilterUp8 = PASS, ParaCode=001
;恒压恒流类型0x9a
ECCircuitCount = 3
ECCircuit0 = 0, ParaCode=000
ECCircuit1 = 1, ParaCode=001
;脉冲+正弦
ECCircuit2 = 2, ParaCode=002
;电解池开关0x9c
ElectrolyticCellOnOffCount = 3
;电解池关(外部)
ElectrolyticCellOnOff0 = 0, ParaCode=000
;电解池开(外部)
ElectrolyticCellOnOff1 = 1, ParaCode=001
;开路电位电解池开
ElectrolyticCellOnOff2 = 2, ParaCode=002
;电流(恒压源实验采W极输出的电流，恒流源实验采C极输出的电流)电流 量程+滤波 +DSP
[AcquisitionChannelType52]
ChannelName = DH_AD1_7002_A
AcqTypeID = 003
;通道总数 = 4
AcqVersion = 15
;恒流输出0x9d
FullValueCount = 13
FullValue0 = 4000mA,ParaCode=012
FullValue1 = 2000mA,ParaCode=011
FullValue2 = 1000mA,ParaCode=010
FullValue3 = 100mA,ParaCode=009
FullValue4 = 10mA,ParaCode=008
FullValue5 = 1mA,ParaCode=007
FullValue6 = 0.1mA,ParaCode=006
FullValue7 = 0.01mA,ParaCode=005
FullValue8 = 0.001mA,ParaCode=004
FullValue9 = 0.0001mA,ParaCode=003
FullValue10 = 1000000mA,ParaCode=016
;外挂1A
FullValue11 = 30000mA,ParaCode=015
FullValue12 = 30000mA,ParaCode=022
;低通滤波器0x04
FilterUpCount = 9
FilterUpDefault = 8
FilterUp0 = 10Hz, ParaCode=008
FilterUp1 = 50Hz, ParaCode=032
FilterUp2 = 100Hz, ParaCode=006
FilterUp3 = 500Hz, ParaCode=016
FilterUp4 = 1kHz, ParaCode=004
FilterUp5 = 5kHz, ParaCode=017
FilterUp6 = 10kHz, ParaCode=002
FilterUp7 = 50kHz, ParaCode=014
FilterUp8 = PASS, ParaCode=001
;电流辅助通道
[AcquisitionChannelType53]
ChannelName = DH_AD1_SUB_7002_A
AcqTypeID = 004
AcqVersion = 15
;低通滤波器0x04
FilterUpCount = 9
FilterUpDefault = 8
FilterUp0 = 10Hz, ParaCode=008
FilterUp1 = 50Hz, ParaCode=032
FilterUp2 = 100Hz, ParaCode=006
FilterUp3 = 500Hz, ParaCode=016
FilterUp4 = 1kHz, ParaCode=004
FilterUp5 = 5kHz, ParaCode=017
FilterUp6 = 10kHz, ParaCode=002
FilterUp7 = 50kHz, ParaCode=014
FilterUp8 = PASS, ParaCode=001
;信号源通道
[AcquisitionChannelType54]
ChannelName = DH_SIGNAL_7301
;信号源
AcqTypeID = 001
AcqVersion = 16
FilterUpCount = 0
FilterUpDefault = 0
FilterUp0 = PASS, ParaCode=001
;恒流输出0x9d
FullValueCount = 2
FullValue0 = 5000mV,ParaCode=002
FullValue1 = 40000mA,ParaCode=020
CircuitType0_RCount = 0 ;电阻计算
CircuitType1_RCount = 1
CircuitType1_R0 = 1
;恒压恒流切换(需要处理修正)
CircuitTypeHandover=1
;数采通道1 电压 +DSP
[AcquisitionChannelType55]
ChannelName = DH_AD0_7301
;电压(采R极电势)
AcqTypeID = 002
;通道总数 = 3
AcqVersion = 16
;电压档位(大小均有)
FullValueCount = 3
FullValue0 = 5000mV,ParaCode=002
FullValue1 = 500mV,ParaCode=005
FullValue2 = 50mV,ParaCode=008
;低通滤波器0x04
FilterUpCount = 0
FilterUpDefault = 0
FilterUp0 = PASS, ParaCode=001
;恒压恒流类型0x9a
ECCircuitCount = 2
ECCircuit0 = 0, ParaCode=000
ECCircuit1 = 1, ParaCode=001
;电解池开关0x9c
ElectrolyticCellOnOffCount = 2
;电解池关(外部)
ElectrolyticCellOnOff0 = 0, ParaCode=000
;电解池开(外部)
ElectrolyticCellOnOff1 = 1, ParaCode=001
;电流(恒压源实验采W极输出的电流，恒流源实验采C极输出的电流)电流 量程+滤波 +DSP
[AcquisitionChannelType56]
ChannelName = DH_AD1_7301
AcqTypeID = 003
;通道总数 = 3
AcqVersion = 16
;恒流输出0x9d
FullValueCount = 1
FullValue0 = 40000mA,ParaCode=020
;低通滤波器0x04
FilterUpCount = 0
FilterUpDefault = 0
FilterUp0 = PASS, ParaCode=001
;电流辅助通道
[AcquisitionChannelType57]
ChannelName = DH_AD1_SUB_7301
AcqTypeID = 004
AcqVersion = 16
;低通滤波器0x04
FilterUpCount = 0
FilterUpDefault = 0
FilterUp0 = PASS, ParaCode=001
;放大器通道类型1
[AmplifierChannelType1]
ChannelName = 信号源通道外挂 恒压
AmpTypeID = 001
AmpSubVersion = 1
AmplifierCount = 1
Amplifier0 = 0.1, ParaCode = 013
;限制可选实验 -1：所有；0：恒压；1：恒流
ExperimentFilter=0
[AmplifierChannelType2]
ChannelName = 电压通道外挂
AmpTypeID = 001
AmpSubVersion = 2
AmplifierCount = 2
Amplifier0 = 0.3333333, ParaCode = 021
Amplifier1 = 1, ParaCode = 001
;限制可选实验 -1：所有；0：恒压；1：恒流
ExperimentFilter=0
[AmplifierChannelType3]
ChannelName = 电流通道外挂
AmpTypeID = 001
AmpSubVersion = 3
AmplifierCount = 5
Amplifier0 = 0.05, ParaCode = 014
Amplifier1 = 0.1, ParaCode = 013
Amplifier2 = 1, ParaCode = 010
Amplifier3 = 10, ParaCode = 009
Amplifier4 = 100, ParaCode = 008
;限制可选实验 -1：所有；0：恒压；1：恒流
ExperimentFilter=0
[AmplifierChannelType4]
ChannelName = 7002信号源通道外挂 20A恒流
AmpTypeID = 002
AmpSubVersion = 1
AmplifierCount = 1
Amplifier0 = 0.1, ParaCode = 013
CircuitType0_RCount = 0 ;电阻计算
CircuitType1_RCount = 1
CircuitType1_R0 = 0.1
;限制可选实验 -1：所有；0：恒压；1：恒流
ExperimentFilter=1
[AmplifierChannelType5]
ChannelName = 7002电压通道外挂 20A
AmpTypeID = 002
AmpSubVersion = 2
AmplifierCount = 2
Amplifier0 = 1, ParaCode = 001
Amplifier1 = 2, ParaCode = 002
;限制可选实验 -1：所有；0：恒压；1：恒流
ExperimentFilter=1
[AmplifierChannelType6]
ChannelName = 7002电流通道外挂 20A
AmpTypeID = 002
AmpSubVersion = 3
AmplifierCount = 1
Amplifier0 = 0.05, ParaCode = 014
;限制可选实验 -1：所有；0：恒压；1：恒流
ExperimentFilter=1
[AmplifierChannelType7]
ChannelName = 信号源通道外挂 恒压
AmpTypeID = 003
AmpSubVersion = 1
AmplifierCount = 1
Amplifier0 = 0.1, ParaCode = 013
;限制可选实验 -1：所有；0：恒压；1：恒流
ExperimentFilter=0
[AmplifierChannelType8]
ChannelName = 电压通道外挂
AmpTypeID = 003
AmpSubVersion = 2
AmplifierCount = 2
Amplifier0 = 1, ParaCode = 001
Amplifier1 = 2, ParaCode = 002
;限制可选实验 -1：所有；0：恒压；1：恒流
ExperimentFilter=0
[AmplifierChannelType9]
ChannelName = 电流通道外挂
AmpTypeID = 003
AmpSubVersion = 3
AmplifierCount = 1
Amplifier0 = 0.05, ParaCode = 014
;限制可选实验 -1：所有；0：恒压；1：恒流
ExperimentFilter=0
[AmplifierChannelType10]
ChannelName = 7000调理器通道
AmpTypeID = 152
AmpSubVersion = -1
AmplifierCount = 1
;没有用
Amplifier0 = 1, ParaCode = 001
;限制可选实验 -1：所有；0：恒压；1：恒流
ExperimentFilter = 0
;硬件修正，信号源相关，横压恒流修正
SignalIGainCount=1
SignalIGain0=10mA, ParaCode = 007
SignalVGainCount=1
SignalVGain0=10000mV, ParaCode = 001
[AmplifierChannelType11]
ChannelName = 7002信号源通道外挂 30A恒流
AmpTypeID = 004
AmpSubVersion = 1
AmplifierCount = 1
Amplifier0 = 0.06666, ParaCode = 013
CircuitType0_RCount = 0 ;电阻计算
CircuitType1_RCount = 1
CircuitType1_R0 = 0.06666
;限制可选实验 -1：所有；0：恒压；1：恒流
ExperimentFilter=1
[AmplifierChannelType12]
ChannelName = 7002电压通道外挂 30A
AmpTypeID = 004
AmpSubVersion = 2
AmplifierCount = 2
Amplifier0 = 1, ParaCode = 001
Amplifier1 = 2, ParaCode = 002
;限制可选实验 -1：所有；0：恒压；1：恒流
ExperimentFilter=1
[AmplifierChannelType13]
ChannelName = 7002电流通道外挂 30A
AmpTypeID = 004
AmpSubVersion = 3
AmplifierCount = 1
Amplifier0 = 0.03333, ParaCode = 015
;限制可选实验 -1：所有；0：恒压；1：恒流
ExperimentFilter=1
[AmplifierChannelType14]
ChannelName = 7002信号源通道外挂 20A恒流
AmpTypeID = 154
AmpSubVersion = 1
AmplifierCount = 1
Amplifier0 = 0.05, ParaCode = 013
CircuitType0_RCount = 0 ;电阻计算
CircuitType1_RCount = 1
CircuitType1_R0 = 0.05
;限制可选实验 -1：所有；0：恒压；1：恒流
ExperimentFilter=1
[AmplifierChannelType15]
ChannelName = 7002电压通道外挂 20A 支持交流阻抗+平衡结果下传
AmpTypeID = 154
AmpSubVersion = 2
AmplifierCount = 2
Amplifier0 = 1.666667, ParaCode = 001
Amplifier1 = 16.66667, ParaCode = 002
;限制可选实验 -1：所有；0：恒压；1：恒流
ExperimentFilter=1
[AmplifierChannelType16]
ChannelName = 7002电流通道外挂 20A
AmpTypeID = 154
AmpSubVersion = 3
AmplifierCount = 1
Amplifier0 = 0.05, ParaCode = 015
;限制可选实验 -1：所有；0：恒压；1：恒流
ExperimentFilter=1
[AmplifierChannelType17]
ChannelName = 7002信号源通道外挂 20A恒流
AmpTypeID = 155
AmpSubVersion = 1
AmplifierCount = 3
Amplifier0 = 0.05, ParaCode = 013
Amplifier1 = 0.1, ParaCode = 000
Amplifier2 = 1, ParaCode = 001
CircuitType0_VolGainMultiCount = 1 ;电压放大倍数
CircuitType0_VolGainMulti0 = 0.1
CircuitType1_RCount = 1;电阻计算
CircuitType1_R0 = 0.01
;恒压恒流切换(需要处理修正)
CircuitTypeHandover=1
;限制可选实验 -1：所有；0：恒压；1：恒流
ExperimentFilter=1
[AmplifierChannelType18]
ChannelName = 7002电压通道外挂 20A 电压10V
AmpTypeID = 155
AmpSubVersion = 2
AmplifierCount = 1
Amplifier0 = 1, ParaCode = 001
;限制可选实验 -1：所有；0：恒压；1：恒流
ExperimentFilter=1
[AmplifierChannelType19]
ChannelName = 7002电流通道外挂 20A
AmpTypeID = 155
AmpSubVersion = 3
AmplifierCount = 1
Amplifier0 = 0.05, ParaCode = 015
;限制可选实验 -1：所有；0：恒压；1：恒流
ExperimentFilter=1
[AmplifierChannelType20]
ChannelName = 7002A信号源通道外挂 30A恒流
AmpTypeID = 156
AmpSubVersion = 1
AmplifierCount = 1
;恒流:30A
Amplifier0 = 0.033333, ParaCode = 015
;恒压:10V
Amplifier1 = 1, ParaCode = 001
CircuitType1_RCount = 1;电阻计算
CircuitType1_R0 = 0.033333
;限制可选实验 -1：所有；0：恒压；1：恒流
ExperimentFilter=1
[AmplifierChannelType21]
ChannelName = 7002A电压通道外挂 30A 电压10V
AmpTypeID = 156
AmpSubVersion = 2
AmplifierCount = 2
Amplifier0 = 1, ParaCode = 001
Amplifier1= 10, ParaCode = 004
;限制可选实验 -1：所有；0：恒压；1：恒流
ExperimentFilter=1
[AmplifierChannelType22]
ChannelName = 7002电流通道外挂 30A
AmpTypeID = 156
AmpSubVersion = 3
AmplifierCount = 2
Amplifier0 = 1, ParaCode = 015
Amplifier1 = 10, ParaCode = 022
;限制可选实验 -1：所有；0：恒压；1：恒流
ExperimentFilter=1
[ChannelType0100]
ChannelName = DH_SIGNAL_6
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 81
FullValueCount = 6
DefaultFullValue = 10
FullValue0 = 1000mA, AcqIndex= 0, AmpIndex = 0
FullValue1 = 100mA, AcqIndex= 1, AmpIndex = 0
FullValue2 = 10mA, AcqIndex= 2, AmpIndex = 0
FullValue3 = 1mA, AcqIndex= 3, AmpIndex = 0
FullValue4 = 0.1mA, AcqIndex= 4, AmpIndex = 0
FullValue5 = 0.01mA, AcqIndex= 5, AmpIndex = 0
[ChannelType0200]
ChannelName = DH_VOLTAGE
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 80
FullValueCount = 3
DefaultFullValue = 10000
FullValue0 = 10000mV, AcqIndex= 0, AmpIndex = 0
FullValue1 = 1000mV, AcqIndex= 1, AmpIndex = 0
FullValue2 = 100mV, AcqIndex= 2, AmpIndex = 0
[ChannelType0300]
ChannelName = DH_CURRENT
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 79
FullValueCount = 10
DefaultFullValue = 1000
FullValue0 = 1000mA, AcqIndex= 0, AmpIndex = 0
FullValue1 = 100mA, AcqIndex= 1, AmpIndex = 0
FullValue2 = 10mA, AcqIndex= 2, AmpIndex = 0
FullValue3 = 1mA, AcqIndex= 3, AmpIndex = 0
FullValue4 = 0.1mA, AcqIndex= 4, AmpIndex = 0
FullValue5 = 0.01mA, AcqIndex= 5, AmpIndex = 0
FullValue6 = 0.001mA, AcqIndex= 6, AmpIndex = 0
FullValue7 = 0.0001mA, AcqIndex= 7, AmpIndex = 0
FullValue8 = 0.00001mA, AcqIndex= 8, AmpIndex = 0
FullValue9 = 0.000001mA, AcqIndex= 9, AmpIndex = 0
[ChannelType0400]
ChannelName = DH_CURRENT_SUB
;通道 = =3，电流辅助通道，设滤波器。
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 122
[ChannelType0500]
ChannelName = DH_SIGNAL_8
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 81
FullValueCount = 8
DefaultFullValue = 10
FullValue0 = 1000mA, AcqIndex= 0, AmpIndex = 0
FullValue1 = 100mA, AcqIndex= 1, AmpIndex = 0
FullValue2 = 10mA, AcqIndex= 2, AmpIndex = 0
FullValue3 = 1mA, AcqIndex= 3, AmpIndex = 0
FullValue4 = 0.1mA, AcqIndex= 4, AmpIndex = 0
FullValue5 = 0.01mA, AcqIndex= 5, AmpIndex = 0
FullValue6 = 0.001mA, AcqIndex= 6, AmpIndex = 0
FullValue7 = 0.0001mA, AcqIndex= 7, AmpIndex = 0
[ChannelType0600]
ChannelName = DH_VOLTAGE
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 80
FullValueCount = 3
DefaultFullValue = 10000
FullValue0 = 10000mV, AcqIndex= 0, AmpIndex = 0
FullValue1 = 1000mV, AcqIndex= 1, AmpIndex = 0
FullValue2 = 100mV, AcqIndex= 2, AmpIndex = 0
[ChannelType0700]
ChannelName = DH_CURRENT
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 79
FullValueCount = 12
DefaultFullValue = 1000
FullValue0 = 1000mA, AcqIndex= 0, AmpIndex = 0
FullValue1 = 100mA, AcqIndex= 1, AmpIndex = 0
FullValue2 = 10mA, AcqIndex= 2, AmpIndex = 0
FullValue3 = 1mA, AcqIndex= 3, AmpIndex = 0
FullValue4 = 0.1mA, AcqIndex= 4, AmpIndex = 0
FullValue5 = 0.01mA, AcqIndex= 5, AmpIndex = 0
FullValue6 = 0.001mA, AcqIndex= 6, AmpIndex = 0
FullValue7 = 0.0001mA, AcqIndex= 7, AmpIndex = 0
FullValue8 = 0.00001mA, AcqIndex= 8, AmpIndex = 0
FullValue9 = 0.000001mA, AcqIndex= 9, AmpIndex = 0
FullValue10 = 0.0000001mA, AcqIndex= 10, AmpIndex = 0
FullValue11 = 1000000mA, AcqIndex= 11, AmpIndex = 0
[ChannelType0800]
ChannelName = DH_CURRENT_SUB
;通道 = =3，电流辅助通道，设滤波器。
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 122
[ChannelType0900]
ChannelName = DH_VOLTAGE+DSP
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 80
FullValueCount = 3
DefaultFullValue = 10000
FullValue0 = 10000mV, AcqIndex= 0, AmpIndex = 0
FullValue1 = 1000mV, AcqIndex= 1, AmpIndex = 0
FullValue2 = 100mV, AcqIndex= 2, AmpIndex = 0
[ChannelType1000]
ChannelName = DH_CURRENT+DSP
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 79
FullValueCount = 13
DefaultFullValue = 1000
FullValue0 = 2000mA, AcqIndex= 0, AmpIndex = 0
FullValue1 = 1000mA, AcqIndex= 1, AmpIndex = 0
FullValue2 = 100mA, AcqIndex= 2, AmpIndex = 0
FullValue3 = 10mA, AcqIndex= 3, AmpIndex = 0
FullValue4 = 1mA, AcqIndex= 4, AmpIndex = 0
FullValue5 = 0.1mA, AcqIndex= 5, AmpIndex = 0
FullValue6 = 0.01mA, AcqIndex= 6, AmpIndex = 0
FullValue7 = 0.001mA, AcqIndex= 7, AmpIndex = 0
FullValue8 = 0.0001mA, AcqIndex= 8, AmpIndex = 0
FullValue9 = 0.00001mA, AcqIndex= 9, AmpIndex = 0
FullValue10 = 0.000001mA, AcqIndex= 10, AmpIndex = 0
FullValue11 = 0.0000001mA, AcqIndex= 11, AmpIndex = 0
FullValue12 = 1000000mA, AcqIndex= 12, AmpIndex = 0
[ChannelType1100]
ChannelName = DH_CURRENT+DSP_SUB
;通道 = =3，电流辅助通道，设滤波器。
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 122
[ChannelType1200]
ChannelName = DH_SIGNAL_8
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 81
FullValueCount = 8
DefaultFullValue = 10
FullValue0 = 1000mA, AcqIndex= 0, AmpIndex = 0
FullValue1 = 100mA, AcqIndex= 1, AmpIndex = 0
FullValue2 = 10mA, AcqIndex= 2, AmpIndex = 0
FullValue3 = 1mA, AcqIndex= 3, AmpIndex = 0
FullValue4 = 0.1mA, AcqIndex= 4, AmpIndex = 0
FullValue5 = 0.01mA, AcqIndex= 5, AmpIndex = 0
FullValue6 = 0.001mA, AcqIndex= 6, AmpIndex = 0
FullValue7 = 0.0001mA, AcqIndex= 7, AmpIndex = 0
[ChannelType1300]
ChannelName = DH_SIGNAL_7002
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 81
FullValueCount = 10
DefaultFullValue = 10
FullValue0 = 4000mA, AcqIndex= 0, AmpIndex = 0
FullValue1 = 2000mA, AcqIndex= 1, AmpIndex = 0
FullValue2 = 1000mA, AcqIndex= 2, AmpIndex = 0
FullValue3 = 100mA, AcqIndex= 3, AmpIndex = 0
FullValue4 = 10mA, AcqIndex= 4, AmpIndex = 0
FullValue5 = 1mA, AcqIndex= 5, AmpIndex = 0
FullValue6 = 0.1mA, AcqIndex= 6, AmpIndex = 0
FullValue7 = 0.01mA, AcqIndex= 7, AmpIndex = 0
FullValue8 = 0.001mA, AcqIndex= 8, AmpIndex = 0
FullValue9 = 0.0001mA, AcqIndex= 9, AmpIndex = 0
[ChannelType1301]
ChannelName = DH_SIGNAL_7002_外挂
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 81
FullValueCount = 1
DefaultFullValue = 20000
FullValue0 = 1000mA, AcqIndex= 2, AmpIndex = 0
[ChannelType1304]
ChannelName = DH_SIGNAL_7002_外挂
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 81
FullValueCount = 1
DefaultFullValue = 20000
FullValue0 = 1000mA, AcqIndex= 2, AmpIndex = 0
[ChannelType1307]
ChannelName = DH_SIGNAL_7002_外挂
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 81
FullValueCount = 1
DefaultFullValue = 20000
FullValue0 = 1000mA, AcqIndex= 2, AmpIndex = 0
[ChannelType1311]
ChannelName = DH_SIGNAL_7002_30A外挂
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 81
FullValueCount = 1
DefaultFullValue = 20000
FullValue0 = 1000mA, AcqIndex= 2, AmpIndex = 0
[ChannelType1314]
ChannelName = DH_SIGNAL_7002_20A外挂
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 81
FullValueCount = 1
DefaultFullValue = 20000
FullValue0 = 20000mA, AcqIndex= 2, AmpIndex = 0
[ChannelType1317]
ChannelName = DH_SIGNAL_7002_20A外挂
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 81
FullValueCount = 1
DefaultFullValue = 20000
FullValue0 = 20000mA, AcqIndex= 2, AmpIndex = 0
[ChannelType1400]
ChannelName = DH_VOLTAGE_7002
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 80
FullValueCount = 3
DefaultFullValue = 10000
FullValue0 = 10000mV, AcqIndex= 0, AmpIndex = 0
FullValue1 = 1000mV, AcqIndex= 1, AmpIndex = 0
FullValue2 = 100mV, AcqIndex= 2, AmpIndex = 0
[ChannelType1402]
ChannelName = DH_VOLTAGE_7002_外挂
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 80
FullValueCount = 2
DefaultFullValue = 10000
FullValue0 = 30000mV, AcqIndex= 3, AmpIndex = 0
FullValue1 = 10000mV, AcqIndex= 3, AmpIndex = 1
[ChannelType1405]
ChannelName = DH_VOLTAGE_7002_外挂
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 80
FullValueCount = 2
DefaultFullValue = 10000
FullValue0 = 10000mV, AcqIndex= 3, AmpIndex = 0
FullValue1 = 5000mV, AcqIndex= 3, AmpIndex = 1
[ChannelType1408]
ChannelName = DH_VOLTAGE_7002_外挂
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 80
FullValueCount = 2
DefaultFullValue = 10000
FullValue0 = 10000mV, AcqIndex= 3, AmpIndex = 0
FullValue1 = 5000mV, AcqIndex= 3, AmpIndex = 1
[ChannelType1412]
ChannelName = DH_VOLTAGE_7002_30A外挂
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 80
FullValueCount = 2
DefaultFullValue = 10000
FullValue0 = 10000mV, AcqIndex= 3, AmpIndex = 0
FullValue1 = 5000mV, AcqIndex= 3, AmpIndex = 1
[ChannelType1415]
ChannelName = DH_VOLTAGE_7002_20A外挂
FullValueFixed = 1
SupportEIS = 1
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 80
FullValueCount = 2
DefaultFullValue = 600
FullValue0 = 6000mV, AcqIndex= 3, AmpIndex = 0
FullValue1 = 600mV, AcqIndex= 3, AmpIndex = 1
[ChannelType1418]
ChannelName = DH_VOLTAGE_7002_20A外挂
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 80
FullValueCount = 1
DefaultFullValue = 10000
FullValue0 = 10000mV, AcqIndex= 3, AmpIndex = 0
[ChannelType1500]
;7002 电流100纳安到4安培；电压去掉5V
ChannelName = DH_CURRENT_7002
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 79
FullValueCount = 9
DefaultFullValue = 1000
FullValue0 = 4000mA, AcqIndex= 0, AmpIndex = 0
FullValue1 = 2000mA, AcqIndex= 1, AmpIndex = 0
FullValue2 = 1000mA, AcqIndex= 2, AmpIndex = 0
FullValue3 = 100mA, AcqIndex= 3, AmpIndex = 0
FullValue4 = 10mA, AcqIndex= 4, AmpIndex = 0
FullValue5 = 1mA, AcqIndex= 5, AmpIndex = 0
FullValue6 = 0.1mA, AcqIndex= 6, AmpIndex = 0
FullValue7 = 0.01mA, AcqIndex= 7, AmpIndex = 0
FullValue8 = 0.001mA, AcqIndex= 8, AmpIndex = 0
FullValue9 = 0.0001mA, AcqIndex= 9, AmpIndex = 0
[ChannelType1503]
ChannelName = DH_CURRENT_7002_外挂
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 79
FullValueCount = 4
DefaultFullValue = 1000
FullValue0 = 10000mA, AcqIndex= 11, AmpIndex = 1
FullValue1 = 1000mA, AcqIndex= 11, AmpIndex = 2
FullValue2 = 100mA, AcqIndex= 11, AmpIndex = 3
FullValue3 = 10mA, AcqIndex= 11, AmpIndex = 4
[ChannelType1506]
ChannelName = DH_CURRENT_7002_外挂
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 79
FullValueCount = 1
DefaultFullValue = 1000
FullValue0 = 20000mA, AcqIndex= 11, AmpIndex = 0
[ChannelType1509]
ChannelName = DH_CURRENT_7002_外挂
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 79
FullValueCount = 1
DefaultFullValue = 20000
FullValue0 = 20000mA, AcqIndex= 11, AmpIndex = 0
[ChannelType1513]
ChannelName = DH_CURRENT_7002_30A外挂
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 79
FullValueCount = 1
DefaultFullValue = 1000
FullValue0 = 30000mA, AcqIndex= 11, AmpIndex = 0
[ChannelType1516]
ChannelName = DH_CURRENT_7002_20A外挂
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 79
FullValueCount = 1
DefaultFullValue = 1000
FullValue0 = 20000mA, AcqIndex= 11, AmpIndex = 0
[ChannelType1519]
ChannelName = DH_CURRENT_7002_20A外挂
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 79
FullValueCount = 1
DefaultFullValue = 1000
FullValue0 = 20000mA, AcqIndex= 11, AmpIndex = 0
[ChannelType1600]
ChannelName = DH_CURRENT_SUB_7002
;通道 = =3，电流辅助通道，设滤波器。
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 122
[ChannelType1700]
ChannelName = DH_SIGNAL_7006
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 81
FullValueCount = 8
DefaultFullValue = 10
FullValue0 = 1000mA, AcqIndex= 0, AmpIndex = 0
FullValue1 = 100mA, AcqIndex= 1, AmpIndex = 0
FullValue2 = 10mA, AcqIndex= 2, AmpIndex = 0
FullValue3 = 1mA, AcqIndex= 3, AmpIndex = 0
FullValue4 = 0.1mA, AcqIndex= 4, AmpIndex = 0
FullValue5 = 0.01mA, AcqIndex= 5, AmpIndex = 0
FullValue6 = 0.001mA, AcqIndex= 6, AmpIndex = 0
FullValue7 = 0.0001mA, AcqIndex= 7, AmpIndex = 0
[ChannelType1800]
ChannelName = DH_VOLTAGE_7006
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 80
FullValueCount = 3
DefaultFullValue = 10000
FullValue0 = 10000mV, AcqIndex= 0, AmpIndex = 0
FullValue1 = 1000mV, AcqIndex= 1, AmpIndex = 0
FullValue2 = 100mV, AcqIndex= 2, AmpIndex = 0
[ChannelType1900]
ChannelName = DH_CURRENT_7006
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 79
FullValueCount = 11
DefaultFullValue = 1000
FullValue0 = 1000mA, AcqIndex= 0, AmpIndex = 0
FullValue1 = 100mA, AcqIndex= 1, AmpIndex = 0
FullValue2 = 10mA, AcqIndex= 2, AmpIndex = 0
FullValue3 = 1mA, AcqIndex= 3, AmpIndex = 0
FullValue4 = 0.1mA, AcqIndex= 4, AmpIndex = 0
FullValue5 = 0.01mA, AcqIndex= 5, AmpIndex = 0
FullValue6 = 0.001mA, AcqIndex= 6, AmpIndex = 0
FullValue7 = 0.0001mA, AcqIndex= 7, AmpIndex = 0
FullValue8 = 0.00001mA, AcqIndex= 8, AmpIndex = 0
FullValue9 = 0.000001mA, AcqIndex= 9, AmpIndex = 0
FullValue10 = 1000000mA, AcqIndex= 10, AmpIndex = 0
[ChannelType2000]
ChannelName = DH_CURRENT_SUB_7006
;通道 = =3，电流辅助通道，设滤波器。
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 122
[ChannelType2100]
ChannelName = DH_SIGNAL_7003
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 81
FullValueCount = 8
DefaultFullValue = 10
FullValue0 = 1000mA, AcqIndex= 0, AmpIndex = 0
FullValue1 = 100mA, AcqIndex= 1, AmpIndex = 0
FullValue2 = 10mA, AcqIndex= 2, AmpIndex = 0
FullValue3 = 1mA, AcqIndex= 3, AmpIndex = 0
FullValue4 = 0.1mA, AcqIndex= 4, AmpIndex = 0
FullValue5 = 0.01mA, AcqIndex= 5, AmpIndex = 0
FullValue6 = 0.001mA, AcqIndex= 6, AmpIndex = 0
FullValue7 = 0.0001mA, AcqIndex= 7, AmpIndex = 0
[ChannelType2200]
ChannelName = DH_VOLTAGE_7003
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 80
FullValueCount = 3
DefaultFullValue = 10000
FullValue0 = 10000mV, AcqIndex= 0, AmpIndex = 0
FullValue1 = 1000mV, AcqIndex= 1, AmpIndex = 0
FullValue2 = 100mV, AcqIndex= 2, AmpIndex = 0
[ChannelType2300]
ChannelName = DH_CURRENT_7003
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 79
FullValueCount = 11
DefaultFullValue = 1000
FullValue0 = 1000mA, AcqIndex= 0, AmpIndex = 0
FullValue1 = 100mA, AcqIndex= 1, AmpIndex = 0
FullValue2 = 10mA, AcqIndex= 2, AmpIndex = 0
FullValue3 = 1mA, AcqIndex= 3, AmpIndex = 0
FullValue4 = 0.1mA, AcqIndex= 4, AmpIndex = 0
FullValue5 = 0.01mA, AcqIndex= 5, AmpIndex = 0
FullValue6 = 0.001mA, AcqIndex= 6, AmpIndex = 0
FullValue7 = 0.0001mA, AcqIndex= 7, AmpIndex = 0
FullValue8 = 0.00001mA, AcqIndex= 8, AmpIndex = 0
FullValue9 = 0.000001mA, AcqIndex= 9, AmpIndex = 0
FullValue10 = 1000000mA, AcqIndex= 10, AmpIndex = 0
[ChannelType2400]
ChannelName = DH_CURRENT_SUB_7003
;通道 = =3，电流辅助通道，设滤波器。
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 122
[ChannelType2500]
ChannelName = DH_SIGNAL_7003_2
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 81
FullValueCount = 9
DefaultFullValue = 10
FullValue0 = 2000mA, AcqIndex= 0, AmpIndex = 0
FullValue1 = 1000mA, AcqIndex= 1, AmpIndex = 0
FullValue2 = 100mA, AcqIndex= 2, AmpIndex = 0
FullValue3 = 10mA, AcqIndex= 3, AmpIndex = 0
FullValue4 = 1mA, AcqIndex= 4, AmpIndex = 0
FullValue5 = 0.1mA, AcqIndex= 5, AmpIndex = 0
FullValue6 = 0.01mA, AcqIndex= 6, AmpIndex = 0
FullValue7 = 0.001mA, AcqIndex= 7, AmpIndex = 0
FullValue8 = 0.0001mA, AcqIndex= 8, AmpIndex = 0
[ChannelType2600]
ChannelName = DH_VOLTAGE_7003_2
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 80
FullValueCount = 3
DefaultFullValue = 10000
FullValue0 = 10000mV, AcqIndex= 0, AmpIndex = 0
FullValue1 = 1000mV, AcqIndex= 1, AmpIndex = 0
FullValue2 = 100mV, AcqIndex= 2, AmpIndex = 0
[ChannelType2700]
ChannelName = DH_CURRENT_7003_2
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 79
FullValueCount = 12
DefaultFullValue = 1000
FullValue0 = 2000mA, AcqIndex= 0, AmpIndex = 0
FullValue1 = 1000mA, AcqIndex= 1, AmpIndex = 0
FullValue2 = 100mA, AcqIndex= 2, AmpIndex = 0
FullValue3 = 10mA, AcqIndex= 3, AmpIndex = 0
FullValue4 = 1mA, AcqIndex= 4, AmpIndex = 0
FullValue5 = 0.1mA, AcqIndex= 5, AmpIndex = 0
FullValue6 = 0.01mA, AcqIndex= 6, AmpIndex = 0
FullValue7 = 0.001mA, AcqIndex= 7, AmpIndex = 0
FullValue8 = 0.0001mA, AcqIndex= 8, AmpIndex = 0
FullValue9 = 0.00001mA, AcqIndex= 9, AmpIndex = 0
FullValue10 = 0.000001mA, AcqIndex= 10, AmpIndex = 0
FullValue11 = 1000000mA, AcqIndex= 11, AmpIndex = 0
[ChannelType2800]
ChannelName = DH_CURRENT_SUB_7003_2
;通道 = =3，电流辅助通道，设滤波器。
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 122
[ChannelType2900]
ChannelName = DH_SIGNAL_7000_1
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 81
FullValueCount = 8
DefaultFullValue = 10
FullValue0 = 1000mA, AcqIndex= 0, AmpIndex = 0
FullValue1 = 100mA, AcqIndex= 1, AmpIndex = 0
FullValue2 = 10mA, AcqIndex= 2, AmpIndex = 0
FullValue3 = 1mA, AcqIndex= 3, AmpIndex = 0
FullValue4 = 0.1mA, AcqIndex= 4, AmpIndex = 0
FullValue5 = 0.01mA, AcqIndex= 5, AmpIndex = 0
FullValue6 = 0.001mA, AcqIndex= 6, AmpIndex = 0
FullValue7 = 0.0001mA, AcqIndex= 7, AmpIndex = 0
[ChannelType3000]
ChannelName = DH_VOLTAGE_7000_1
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 80
FullValueCount = 3
DefaultFullValue = 10000
FullValue0 = 10000mV, AcqIndex= 0, AmpIndex = 0
FullValue1 = 1000mV, AcqIndex= 1, AmpIndex = 0
FullValue2 = 100mV, AcqIndex= 2, AmpIndex = 0
[ChannelType3100]
ChannelName = DH_CURRENT_7000_1
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 79
FullValueCount = 11
DefaultFullValue = 1000
FullValue0 = 1000mA, AcqIndex= 0, AmpIndex = 0
FullValue1 = 100mA, AcqIndex= 1, AmpIndex = 0
FullValue2 = 10mA, AcqIndex= 2, AmpIndex = 0
FullValue3 = 1mA, AcqIndex= 3, AmpIndex = 0
FullValue4 = 0.1mA, AcqIndex= 4, AmpIndex = 0
FullValue5 = 0.01mA, AcqIndex= 5, AmpIndex = 0
FullValue6 = 0.001mA, AcqIndex= 6, AmpIndex = 0
FullValue7 = 0.0001mA, AcqIndex= 7, AmpIndex = 0
FullValue8 = 0.00001mA, AcqIndex= 8, AmpIndex = 0
FullValue9 = 0.000001mA, AcqIndex= 9, AmpIndex = 0
FullValue10 = 1000000mA, AcqIndex= 10, AmpIndex = 0
[ChannelType3200]
ChannelName = DH_CURRENT_SUB_7000_1
;通道 = =3，电流辅助通道，设滤波器。
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 122
[ChannelType3310]
ChannelName = DH_CURRENT_SUB_7000_1
;通道 = =3，电流辅助通道，设滤波器。
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 242
FullValueCount = 1
DefaultFullValue = 10000
FullValue0 = 10000mV, AcqIndex= 0, AmpIndex = 0
[ChannelType3400]
ChannelName = DH_SIGNAL_7005
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 81
FullValueCount = 8
DefaultFullValue = 10
FullValue0 = 4000mA, AcqIndex= 0, AmpIndex = 0
FullValue1 = 1000mA, AcqIndex= 1, AmpIndex = 0
FullValue2 = 100mA, AcqIndex= 2, AmpIndex = 0
FullValue3 = 10mA, AcqIndex= 3, AmpIndex = 0
FullValue4 = 1mA, AcqIndex= 4, AmpIndex = 0
FullValue5 = 0.1mA, AcqIndex= 5, AmpIndex = 0
FullValue6 = 0.01mA, AcqIndex= 6, AmpIndex = 0
FullValue7 = 0.001mA, AcqIndex= 7, AmpIndex = 0
FullValue8 = 0.0001mA, AcqIndex= 8, AmpIndex = 0
[ChannelType3500]
ChannelName = DH_VOLTAGE_7005
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 80
FullValueCount = 3
DefaultFullValue = 10000
FullValue0 = 10000mV, AcqIndex= 0, AmpIndex = 0
FullValue1 = 1000mV, AcqIndex= 1, AmpIndex = 0
FullValue2 = 100mV, AcqIndex= 2, AmpIndex = 0
[ChannelType3600]
ChannelName = DH_CURRENT_7005
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 79
FullValueCount = 14
DefaultFullValue = 4000
FullValue0 = 4000mA, AcqIndex= 0, AmpIndex = 0
FullValue1 = 1000mA, AcqIndex= 1, AmpIndex = 0
FullValue2 = 100mA, AcqIndex= 2, AmpIndex = 0
FullValue3 = 10mA, AcqIndex= 3, AmpIndex = 0
FullValue4 = 1mA, AcqIndex= 4, AmpIndex = 0
FullValue5 = 0.1mA, AcqIndex= 5, AmpIndex = 0
FullValue6 = 0.01mA, AcqIndex= 6, AmpIndex = 0
FullValue7 = 0.001mA, AcqIndex= 7, AmpIndex = 0
FullValue8 = 0.0001mA, AcqIndex= 8, AmpIndex = 0
FullValue9 = 0.00001mA, AcqIndex= 9, AmpIndex = 0
FullValue10 = 0.000001mA, AcqIndex= 10, AmpIndex = 0
FullValue11 = 0.0000001mA, AcqIndex= 11, AmpIndex = 0
FullValue12 = 0.00000001mA, AcqIndex= 12, AmpIndex = 0
FullValue13 = 1000000mA, AcqIndex= 13, AmpIndex = 0
[ChannelType3700]
ChannelName = DH_CURRENT_SUB_7000_1
;通道 = =3，电流辅助通道，设滤波器。
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 122
[ChannelType3800]
ChannelName = DH_SIGNAL_7003_A
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 81
FullValueCount = 8
DefaultFullValue = 10
FullValue0 = 1000mA, AcqIndex= 0, AmpIndex = 0
FullValue1 = 100mA, AcqIndex= 1, AmpIndex = 0
FullValue2 = 10mA, AcqIndex= 2, AmpIndex = 0
FullValue3 = 1mA, AcqIndex= 3, AmpIndex = 0
FullValue4 = 0.1mA, AcqIndex= 4, AmpIndex = 0
FullValue5 = 0.01mA, AcqIndex= 5, AmpIndex = 0
FullValue6 = 0.001mA, AcqIndex= 6, AmpIndex = 0
FullValue7 = 0.0001mA, AcqIndex= 7, AmpIndex = 0
[ChannelType3900]
ChannelName = DH_VOLTAGE_7003_A
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 80
FullValueCount = 3
DefaultFullValue = 10000
FullValue0 = 10000mV, AcqIndex= 0, AmpIndex = 0
FullValue1 = 1000mV, AcqIndex= 1, AmpIndex = 0
FullValue2 = 100mV, AcqIndex= 2, AmpIndex = 0
[ChannelType4000]
ChannelName = DH_CURRENT_7003_A
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 79
FullValueCount = 14
DefaultFullValue = 1000
FullValue0 = 1000mA, AcqIndex= 0, AmpIndex = 0
FullValue1 = 100mA, AcqIndex= 1, AmpIndex = 0
FullValue2 = 10mA, AcqIndex= 2, AmpIndex = 0
FullValue3 = 1mA, AcqIndex= 3, AmpIndex = 0
FullValue4 = 0.1mA, AcqIndex= 4, AmpIndex = 0
FullValue5 = 0.01mA, AcqIndex= 5, AmpIndex = 0
FullValue6 = 0.001mA, AcqIndex= 6, AmpIndex = 0
FullValue7 = 0.0001mA, AcqIndex= 7, AmpIndex = 0
FullValue8 = 0.00001mA, AcqIndex= 8, AmpIndex = 0
FullValue9 = 0.000001mA, AcqIndex= 9, AmpIndex = 0
FullValue10 = 0.0000001mA, AcqIndex= 10, AmpIndex = 0
FullValue11 = 0.00000001mA, AcqIndex= 11, AmpIndex = 0
FullValue12 = 0.000000001mA, AcqIndex= 11, AmpIndex = 0
FullValue13 = 1000000mA, AcqIndex= 13, AmpIndex = 0
[ChannelType4100]
ChannelName = DH_CURRENT_SUB_7003_A
;通道 = =3，电流辅助通道，设滤波器。
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 122
[ChannelType4200]
ChannelName = DH_SIGNAL_7000_C
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 81
FullValueCount = 8
DefaultFullValue = 10
FullValue0 = 1000mA, AcqIndex= 0, AmpIndex = 0
FullValue1 = 100mA, AcqIndex= 1, AmpIndex = 0
FullValue2 = 10mA, AcqIndex= 2, AmpIndex = 0
FullValue3 = 1mA, AcqIndex= 3, AmpIndex = 0
FullValue4 = 0.1mA, AcqIndex= 4, AmpIndex = 0
FullValue5 = 0.01mA, AcqIndex= 5, AmpIndex = 0
FullValue6 = 0.001mA, AcqIndex= 6, AmpIndex = 0
FullValue7 = 0.0001mA, AcqIndex= 7, AmpIndex = 0
[ChannelType4300]
ChannelName = DH_VOLTAGE_7000_C
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 80
FullValueCount = 3
DefaultFullValue = 10000
FullValue0 = 10000mV, AcqIndex= 0, AmpIndex = 0
FullValue1 = 1000mV, AcqIndex= 1, AmpIndex = 0
FullValue2 = 100mV, AcqIndex= 2, AmpIndex = 0
[ChannelType4400]
ChannelName = DH_CURRENT_7000_C
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 79
FullValueCount = 11
DefaultFullValue = 1000
FullValue0 = 1000mA, AcqIndex= 0, AmpIndex = 0
FullValue1 = 100mA, AcqIndex= 1, AmpIndex = 0
FullValue2 = 10mA, AcqIndex= 2, AmpIndex = 0
FullValue3 = 1mA, AcqIndex= 3, AmpIndex = 0
FullValue4 = 0.1mA, AcqIndex= 4, AmpIndex = 0
FullValue5 = 0.01mA, AcqIndex= 5, AmpIndex = 0
FullValue6 = 0.001mA, AcqIndex= 6, AmpIndex = 0
FullValue7 = 0.0001mA, AcqIndex= 7, AmpIndex = 0
FullValue8 = 0.00001mA, AcqIndex= 8, AmpIndex = 0
FullValue9 = 0.000001mA, AcqIndex= 9, AmpIndex = 0
FullValue10 = 1000000mA, AcqIndex= 10, AmpIndex = 0
[ChannelType4500]
ChannelName = DH_CURRENT_SUB_7000_C
;通道 = =3，电流辅助通道，设滤波器。
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 122
[ChannelType4600]
ChannelName = DH_SIGNAL_7001_A
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 81
FullValueCount = 9
DefaultFullValue = 10
FullValue0 = 2000mA, AcqIndex= 0, AmpIndex = 0
FullValue1 = 1000mA, AcqIndex= 1, AmpIndex = 0
FullValue2 = 100mA, AcqIndex= 2, AmpIndex = 0
FullValue3 = 10mA, AcqIndex= 3, AmpIndex = 0
FullValue4 = 1mA, AcqIndex= 4, AmpIndex = 0
FullValue5 = 0.1mA, AcqIndex= 5, AmpIndex = 0
FullValue6 = 0.01mA, AcqIndex= 6, AmpIndex = 0
FullValue7 = 0.001mA, AcqIndex= 7, AmpIndex = 0
FullValue8 = 0.0001mA, AcqIndex= 8, AmpIndex = 0
[ChannelType4700]
ChannelName = DH_VOLTAGE_7001_A
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 80
FullValueCount = 3
DefaultFullValue = 10000
FullValue0 = 10000mV, AcqIndex= 0, AmpIndex = 0
FullValue1 = 1000mV, AcqIndex= 1, AmpIndex = 0
FullValue2 = 100mV, AcqIndex= 2, AmpIndex = 0
[ChannelType4800]
ChannelName = DH_CURRENT_7001_A
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 79
FullValueCount = 13
DefaultFullValue = 1000
FullValue0 = 2000mA, AcqIndex= 0, AmpIndex = 0
FullValue1 = 1000mA, AcqIndex= 1, AmpIndex = 0
FullValue2 = 100mA, AcqIndex= 2, AmpIndex = 0
FullValue3 = 10mA, AcqIndex= 3, AmpIndex = 0
FullValue4 = 1mA, AcqIndex= 4, AmpIndex = 0
FullValue5 = 0.1mA, AcqIndex= 5, AmpIndex = 0
FullValue6 = 0.01mA, AcqIndex= 6, AmpIndex = 0
FullValue7 = 0.001mA, AcqIndex= 7, AmpIndex = 0
FullValue8 = 0.0001mA, AcqIndex= 8, AmpIndex = 0
FullValue9 = 0.00001mA, AcqIndex= 9, AmpIndex = 0
FullValue10 = 0.000001mA, AcqIndex= 10, AmpIndex = 0
FullValue11 = 0.0000001mA, AcqIndex= 11, AmpIndex = 0
FullValue12 = 1000000mA, AcqIndex= 12, AmpIndex = 0
[ChannelType4900]
ChannelName = DH_CURRENT_SUB_7001_A
;通道 = =3，电流辅助通道，设滤波器。
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 122
[ChannelType5000]
ChannelName = DH_SIGNAL_7002_A
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 81
FullValueCount = 9
DefaultFullValue = 10
FullValue0 = 4000mA, AcqIndex= 0, AmpIndex = 0
FullValue1 = 2000mA, AcqIndex= 1, AmpIndex = 0
FullValue2 = 1000mA, AcqIndex= 2, AmpIndex = 0
FullValue3 = 100mA, AcqIndex= 3, AmpIndex = 0
FullValue4 = 10mA, AcqIndex= 4, AmpIndex = 0
FullValue5 = 1mA, AcqIndex= 5, AmpIndex = 0
FullValue6 = 0.1mA, AcqIndex= 6, AmpIndex = 0
FullValue7 = 0.01mA, AcqIndex= 7, AmpIndex = 0
FullValue8 = 0.001mA, AcqIndex= 8, AmpIndex = 0
[ChannelType5020]
ChannelName = DH_SIGNAL_7002A_30A外挂
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 81
FullValueCount = 1
DefaultFullValue = 30000
FullValue0 = 30000mA, AcqIndex= 2, AmpIndex = 0
FullValue1 = 10000mV, AcqIndex= 9, AmpIndex = 1
[ChannelType5100]
ChannelName = DH_VOLTAGE_7002_A
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 80
FullValueCount = 3
DefaultFullValue = 10000
FullValue0 = 10000mV, AcqIndex= 0, AmpIndex = 0
FullValue1 = 1000mV, AcqIndex= 1, AmpIndex = 0
FullValue2 = 100mV, AcqIndex= 2, AmpIndex = 0
[ChannelType5121]
ChannelName = DH_VOLTAGE_7002A_30A外挂
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 80
FullValueCount = 2
DefaultFullValue = 10000
FullValue0 = 10000mV, AcqIndex= 3, AmpIndex = 0
FullValue1 = 1000mV, AcqIndex= 3, AmpIndex = 1
SupportEIS = 1
;交流阻抗需要对幅值计算修正
ImpeNeedCalCoief=1
[ChannelType5200]
ChannelName = DH_CURRENT_7002_A
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 79
FullValueCount = 11
DefaultFullValue = 1000
FullValue0 = 4000mA, AcqIndex= 0, AmpIndex = 0
FullValue1 = 2000mA, AcqIndex= 1, AmpIndex = 0
FullValue2 = 1000mA, AcqIndex= 2, AmpIndex = 0
FullValue3 = 100mA, AcqIndex= 3, AmpIndex = 0
FullValue4 = 10mA, AcqIndex= 4, AmpIndex = 0
FullValue5 = 1mA, AcqIndex= 5, AmpIndex = 0
FullValue6 = 0.1mA, AcqIndex= 6, AmpIndex = 0
FullValue7 = 0.01mA, AcqIndex= 7, AmpIndex = 0
FullValue8 = 0.001mA, AcqIndex= 8, AmpIndex = 0
FullValue9 = 0.0001mA, AcqIndex= 9, AmpIndex = 0
FullValue10 = 1000000mA, AcqIndex= 10, AmpIndex = 0
[ChannelType5222]
ChannelName = DH_CURRENT_7002A_30A外挂
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 79
FullValueCount = 2
DefaultFullValue = 30000
FullValue0 = 30000mA, AcqIndex= 11, AmpIndex = 0
FullValue1 = 3000mA, AcqIndex= 12, AmpIndex = 1
;交流阻抗需要对幅值计算修正
ImpeNeedCalCoief=1
[ChannelType5300]
ChannelName = DH_CURRENT_SUB_7002_A
;通道 = =3，电流辅助通道，设滤波器。
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 122
[ChannelType5400]
ChannelName = DH_SIGNAL_7301
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 81
FullValueCount = 2
DefaultFullValue = 40000
FullValue0 = 5000mV, AcqIndex= 0, AmpIndex = 0
FullValue1 = 40000mA, AcqIndex= 1, AmpIndex = 0
[ChannelType5500]
ChannelName = DH_VOLTAGE_7301
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 80
FullValueCount = 1
DefaultFullValue = 10000
FullValue0 = 5000mV, AcqIndex= 0, AmpIndex = 0
FullValue1 = 500mV, AcqIndex= 1, AmpIndex = 0
FullValue2 = 50mV, AcqIndex= 2, AmpIndex = 0
[ChannelType5600]
ChannelName = DH_CURRENT_7301
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 79
FullValueCount = 1
DefaultFullValue = 40000
FullValue0 = 40000mA, AcqIndex= 0, AmpIndex = 0
[ChannelType5700]
ChannelName = DH_CURRENT_SUB_7301
;通道 = =3，电流辅助通道，设滤波器。
MeasureSelCount = 1 ; 测量内容项
MeasureSel0 = 122
[Channel]
ACQChannelTypeCount = 57 ;数采通道类型数
AMPChannelTypeCount = 22 ;适配器通道类型数
ChannelFirst=0
ChannelLast=4
ChannelsPerCase=5
TypeCount=1024
WriteChannelType=0
Reference in New Issue View Git Blame Copy Permalink