from functools import partial import networkx as nx import logging import uuid from typing import List, Dict, Any, Optional from .utils.vessel_parser import get_vessel, find_connected_stirrer from .utils.logger_util import debug_print, action_log from .pump_protocol import generate_pump_protocol_with_rinsing, generate_pump_protocol # 设置日志 logger = logging.getLogger(__name__) create_action_log = partial(action_log, prefix="[抽真空充气]") def find_gas_source(G: nx.DiGraph, gas: str) -> str: """ 根据气体名称查找对应的气源，支持多种匹配模式： 1. 容器名称匹配 2. 气体类型匹配（data.gas_type） 3. 默认气源 """ debug_print(f"正在查找气体 '{gas}' 的气源...") # 通过容器名称匹配 gas_source_patterns = [ f"gas_source_{gas}", f"gas_{gas}", f"flask_{gas}", f"{gas}_source", f"source_{gas}", f"reagent_bottle_{gas}", f"bottle_{gas}" ] for pattern in gas_source_patterns: if pattern in G.nodes(): debug_print(f"通过名称找到气源: {pattern}") return pattern # 通过气体类型匹配 (data.gas_type) for node_id in G.nodes(): node_data = G.nodes[node_id] node_class = node_data.get('class', '') or '' if ('gas_source' in node_class or 'gas' in node_id.lower() or node_id.startswith('flask_')): data = node_data.get('data', {}) gas_type = data.get('gas_type', '') if gas_type.lower() == gas.lower(): debug_print(f"通过气体类型找到气源: {node_id} (气体类型: {gas_type})") return node_id config = node_data.get('config', {}) config_gas_type = config.get('gas_type', '') if config_gas_type.lower() == gas.lower(): debug_print(f"通过配置气体类型找到气源: {node_id} (配置气体类型: {config_gas_type})") return node_id # 查找所有可用的气源设备 available_gas_sources = [] for node_id in G.nodes(): node_data = G.nodes[node_id] node_class = node_data.get('class', '') or '' if ('gas_source' in node_class or 'gas' in node_id.lower() or (node_id.startswith('flask_') and any(g in node_id.lower() for g in ['air', 'nitrogen', 'argon']))): data = node_data.get('data', {}) gas_type = data.get('gas_type', '未知') available_gas_sources.append(f"{node_id} (气体类型: {gas_type})") # 如果找不到特定气体，使用默认的第一个气源 default_gas_sources = [ node for node in G.nodes() if ((G.nodes[node].get('class') or '').find('virtual_gas_source') != -1 or 'gas_source' in node) ] if default_gas_sources: default_source = default_gas_sources[0] debug_print(f"未找到特定气体 '{gas}'，使用默认气源: {default_source}") return default_source raise ValueError(f"无法找到气体 '{gas}' 的气源。可用气源: {available_gas_sources}") def find_vacuum_pump(G: nx.DiGraph) -> str: """查找真空泵设备""" vacuum_pumps = [] for node in G.nodes(): node_data = G.nodes[node] node_class = node_data.get('class', '') or '' if ('virtual_vacuum_pump' in node_class or 'vacuum_pump' in node.lower() or 'vacuum' in node_class.lower()): vacuum_pumps.append(node) if not vacuum_pumps: raise ValueError("系统中未找到真空泵") debug_print(f"使用真空泵: {vacuum_pumps[0]}") return vacuum_pumps[0] def find_vacuum_solenoid_valve(G: nx.DiGraph, vacuum_pump: str) -> Optional[str]: """查找真空泵相关的电磁阀""" solenoid_valves = [] for node in G.nodes(): node_data = G.nodes[node] node_class = node_data.get('class', '') or '' if ('solenoid' in node_class.lower() or 'solenoid_valve' in node.lower()): solenoid_valves.append(node) # 检查连接关系 for solenoid in solenoid_valves: if G.has_edge(solenoid, vacuum_pump) or G.has_edge(vacuum_pump, solenoid): debug_print(f"找到连接的真空电磁阀: {solenoid}") return solenoid # 通过命名规则查找 for solenoid in solenoid_valves: if 'vacuum' in solenoid.lower() or solenoid == 'solenoid_valve_1': debug_print(f"通过命名找到真空电磁阀: {solenoid}") return solenoid debug_print("未找到真空电磁阀") return None def find_gas_solenoid_valve(G: nx.DiGraph, gas_source: str) -> Optional[str]: """查找气源相关的电磁阀""" solenoid_valves = [] for node in G.nodes(): node_data = G.nodes[node] node_class = node_data.get('class', '') or '' if ('solenoid' in node_class.lower() or 'solenoid_valve' in node.lower()): solenoid_valves.append(node) # 检查连接关系 for solenoid in solenoid_valves: if G.has_edge(gas_source, solenoid) or G.has_edge(solenoid, gas_source): debug_print(f"找到连接的气源电磁阀: {solenoid}") return solenoid # 通过命名规则查找 for solenoid in solenoid_valves: if 'gas' in solenoid.lower() or solenoid == 'solenoid_valve_2': debug_print(f"通过命名找到气源电磁阀: {solenoid}") return solenoid debug_print("未找到气源电磁阀") return None def generate_evacuateandrefill_protocol( G: nx.DiGraph, vessel: dict, gas: str, **kwargs ) -> List[Dict[str, Any]]: """ 生成抽真空和充气操作的动作序列 Args: G: 设备图 vessel: 目标容器字典（必需） gas: 气体名称（必需） **kwargs: 其他参数（兼容性） Returns: List[Dict[str, Any]]: 动作序列 """ vessel_id, vessel_data = get_vessel(vessel) # 硬编码重复次数为 3 repeats = 3 protocol_id = str(uuid.uuid4()) debug_print(f"开始生成抽真空充气协议: vessel={vessel_id}, gas={gas}, repeats={repeats}") action_sequence = [] # === 参数验证和修正 === action_sequence.append(create_action_log(f"开始抽真空充气操作 - 容器: {vessel_id}", "🎬")) action_sequence.append(create_action_log(f"目标气体: {gas}", "💨")) action_sequence.append(create_action_log(f"循环次数: {repeats}", "🔄")) if not vessel_id: raise ValueError("容器参数不能为空") if not gas: raise ValueError("气体参数不能为空") if vessel_id not in G.nodes(): raise ValueError(f"容器 '{vessel_id}' 在系统中不存在") action_sequence.append(create_action_log("参数验证通过", "✅")) # 标准化气体名称 gas_aliases = { 'n2': 'nitrogen', 'ar': 'argon', 'air': 'air', 'o2': 'oxygen', 'co2': 'carbon_dioxide', 'h2': 'hydrogen', '氮气': 'nitrogen', '氩气': 'argon', '空气': 'air', '氧气': 'oxygen', '二氧化碳': 'carbon_dioxide', '氢气': 'hydrogen' } original_gas = gas gas_lower = gas.lower().strip() if gas_lower in gas_aliases: gas = gas_aliases[gas_lower] debug_print(f"标准化气体名称: {original_gas} -> {gas}") action_sequence.append(create_action_log(f"气体名称标准化: {original_gas} -> {gas}", "🔄")) debug_print(f"最终参数: 容器={vessel_id}, 气体={gas}, 重复={repeats}") # === 查找设备 === action_sequence.append(create_action_log("正在查找相关设备...", "🔍")) try: vacuum_pump = find_vacuum_pump(G) action_sequence.append(create_action_log(f"找到真空泵: {vacuum_pump}", "🌪️")) gas_source = find_gas_source(G, gas) action_sequence.append(create_action_log(f"找到气源: {gas_source}", "💨")) vacuum_solenoid = find_vacuum_solenoid_valve(G, vacuum_pump) if vacuum_solenoid: action_sequence.append(create_action_log(f"找到真空电磁阀: {vacuum_solenoid}", "🚪")) else: action_sequence.append(create_action_log("未找到真空电磁阀", "⚠️")) gas_solenoid = find_gas_solenoid_valve(G, gas_source) if gas_solenoid: action_sequence.append(create_action_log(f"找到气源电磁阀: {gas_solenoid}", "🚪")) else: action_sequence.append(create_action_log("未找到气源电磁阀", "⚠️")) stirrer_id = find_connected_stirrer(G, vessel_id) if stirrer_id: action_sequence.append(create_action_log(f"找到搅拌器: {stirrer_id}", "🌪️")) else: action_sequence.append(create_action_log("未找到搅拌器", "⚠️")) debug_print(f"设备配置: 真空泵={vacuum_pump}, 气源={gas_source}, 搅拌器={stirrer_id}") except Exception as e: debug_print(f"设备查找失败: {str(e)}") action_sequence.append(create_action_log(f"设备查找失败: {str(e)}", "❌")) raise ValueError(f"设备查找失败: {str(e)}") # === 参数设置 === action_sequence.append(create_action_log("设置操作参数...", "⚙️")) # 根据气体类型调整参数 if gas.lower() in ['nitrogen', 'argon']: VACUUM_VOLUME = 25.0 REFILL_VOLUME = 25.0 PUMP_FLOW_RATE = 2.0 VACUUM_TIME = 30.0 REFILL_TIME = 20.0 action_sequence.append(create_action_log("检测到惰性气体，使用标准参数", "💨")) elif gas.lower() in ['air', 'oxygen']: VACUUM_VOLUME = 20.0 REFILL_VOLUME = 20.0 PUMP_FLOW_RATE = 1.5 VACUUM_TIME = 45.0 REFILL_TIME = 25.0 action_sequence.append(create_action_log("检测到活性气体，使用保守参数", "🔥")) else: VACUUM_VOLUME = 15.0 REFILL_VOLUME = 15.0 PUMP_FLOW_RATE = 1.0 VACUUM_TIME = 60.0 REFILL_TIME = 30.0 action_sequence.append(create_action_log("未知气体类型，使用安全参数", "❓")) STIR_SPEED = 200.0 action_sequence.append(create_action_log(f"真空体积: {VACUUM_VOLUME}mL", "📏")) action_sequence.append(create_action_log(f"充气体积: {REFILL_VOLUME}mL", "📏")) action_sequence.append(create_action_log(f"泵流速: {PUMP_FLOW_RATE}mL/s", "⚡")) # === 路径验证 === action_sequence.append(create_action_log("验证传输路径...", "🛤️")) try: if nx.has_path(G, vessel_id, vacuum_pump): vacuum_path = nx.shortest_path(G, source=vessel_id, target=vacuum_pump) action_sequence.append(create_action_log(f"真空路径: {' -> '.join(vacuum_path)}", "🛤️")) else: action_sequence.append(create_action_log("真空路径检查: 路径不存在", "⚠️")) if nx.has_path(G, gas_source, vessel_id): gas_path = nx.shortest_path(G, source=gas_source, target=vessel_id) action_sequence.append(create_action_log(f"气体路径: {' -> '.join(gas_path)}", "🛤️")) else: action_sequence.append(create_action_log("气体路径检查: 路径不存在", "⚠️")) except Exception as e: action_sequence.append(create_action_log(f"路径验证失败: {str(e)}", "⚠️")) # === 启动搅拌器 === if stirrer_id: action_sequence.append(create_action_log(f"启动搅拌器 {stirrer_id} (速度: {STIR_SPEED}rpm)", "🌪️")) action_sequence.append({ "device_id": stirrer_id, "action_name": "start_stir", "action_kwargs": { "vessel": {"id": vessel_id}, "stir_speed": STIR_SPEED, "purpose": "抽真空充气前预搅拌" } }) action_sequence.append(create_action_log("等待搅拌稳定...", "⏳")) action_sequence.append({ "action_name": "wait", "action_kwargs": {"time": 5.0} }) else: action_sequence.append(create_action_log("跳过搅拌器启动", "⏭️")) # === 执行循环 === action_sequence.append(create_action_log(f"开始 {repeats} 次抽真空-充气循环", "🔄")) for cycle in range(repeats): action_sequence.append(create_action_log(f"第 {cycle+1}/{repeats} 轮循环开始", "🚀")) # ============ 抽真空阶段 ============ action_sequence.append(create_action_log("开始抽真空阶段", "🌪️")) # 启动真空泵 action_sequence.append(create_action_log(f"启动真空泵: {vacuum_pump}", "🔛")) action_sequence.append({ "device_id": vacuum_pump, "action_name": "set_status", "action_kwargs": {"string": "ON"} }) # 开启真空电磁阀 if vacuum_solenoid: action_sequence.append(create_action_log(f"打开真空电磁阀: {vacuum_solenoid}", "🚪")) action_sequence.append({ "device_id": vacuum_solenoid, "action_name": "set_valve_position", "action_kwargs": {"command": "OPEN"} }) # 抽真空操作 action_sequence.append(create_action_log(f"开始抽真空: {vessel_id} -> {vacuum_pump}", "🌪️")) try: vacuum_transfer_actions = generate_pump_protocol_with_rinsing( G=G, from_vessel=vessel_id, to_vessel=vacuum_pump, volume=VACUUM_VOLUME, amount="", time=0.0, viscous=False, rinsing_solvent="", rinsing_volume=0.0, rinsing_repeats=0, solid=False, flowrate=PUMP_FLOW_RATE, transfer_flowrate=PUMP_FLOW_RATE ) if vacuum_transfer_actions: action_sequence.extend(vacuum_transfer_actions) action_sequence.append(create_action_log(f"抽真空协议完成 ({len(vacuum_transfer_actions)} 个操作)", "✅")) else: action_sequence.append(create_action_log("抽真空协议为空，使用手动等待", "⚠️")) action_sequence.append({ "action_name": "wait", "action_kwargs": {"time": VACUUM_TIME} }) except Exception as e: debug_print(f"抽真空失败: {str(e)}") action_sequence.append(create_action_log(f"抽真空失败: {str(e)}", "❌")) action_sequence.append({ "action_name": "wait", "action_kwargs": {"time": VACUUM_TIME} }) # 抽真空后等待 wait_minutes = VACUUM_TIME / 60 action_sequence.append(create_action_log(f"抽真空后等待 ({wait_minutes:.1f} 分钟)", "⏳")) action_sequence.append({ "action_name": "wait", "action_kwargs": {"time": VACUUM_TIME} }) # 关闭真空电磁阀 if vacuum_solenoid: action_sequence.append(create_action_log(f"关闭真空电磁阀: {vacuum_solenoid}", "🚪")) action_sequence.append({ "device_id": vacuum_solenoid, "action_name": "set_valve_position", "action_kwargs": {"command": "CLOSED"} }) # 关闭真空泵 action_sequence.append(create_action_log(f"停止真空泵: {vacuum_pump}", "🔴")) action_sequence.append({ "device_id": vacuum_pump, "action_name": "set_status", "action_kwargs": {"string": "OFF"} }) # 阶段间等待 action_sequence.append(create_action_log("抽真空阶段完成，短暂等待", "⏳")) action_sequence.append({ "action_name": "wait", "action_kwargs": {"time": 5.0} }) # ============ 充气阶段 ============ action_sequence.append(create_action_log("开始气体充气阶段", "💨")) # 启动气源 action_sequence.append(create_action_log(f"启动气源: {gas_source}", "🔛")) action_sequence.append({ "device_id": gas_source, "action_name": "set_status", "action_kwargs": {"string": "ON"} }) # 开启气源电磁阀 if gas_solenoid: action_sequence.append(create_action_log(f"打开气源电磁阀: {gas_solenoid}", "🚪")) action_sequence.append({ "device_id": gas_solenoid, "action_name": "set_valve_position", "action_kwargs": {"command": "OPEN"} }) # 充气操作 action_sequence.append(create_action_log(f"开始气体充气: {gas_source} -> {vessel_id}", "💨")) try: gas_transfer_actions = generate_pump_protocol_with_rinsing( G=G, from_vessel=gas_source, to_vessel=vessel_id, volume=REFILL_VOLUME, amount="", time=0.0, viscous=False, rinsing_solvent="", rinsing_volume=0.0, rinsing_repeats=0, solid=False, flowrate=PUMP_FLOW_RATE, transfer_flowrate=PUMP_FLOW_RATE ) if gas_transfer_actions: action_sequence.extend(gas_transfer_actions) action_sequence.append(create_action_log(f"气体充气协议完成 ({len(gas_transfer_actions)} 个操作)", "✅")) else: action_sequence.append(create_action_log("充气协议为空，使用手动等待", "⚠️")) action_sequence.append({ "action_name": "wait", "action_kwargs": {"time": REFILL_TIME} }) except Exception as e: debug_print(f"气体充气失败: {str(e)}") action_sequence.append(create_action_log(f"气体充气失败: {str(e)}", "❌")) action_sequence.append({ "action_name": "wait", "action_kwargs": {"time": REFILL_TIME} }) # 充气后等待 refill_wait_minutes = REFILL_TIME / 60 action_sequence.append(create_action_log(f"充气后等待 ({refill_wait_minutes:.1f} 分钟)", "⏳")) action_sequence.append({ "action_name": "wait", "action_kwargs": {"time": REFILL_TIME} }) # 关闭气源电磁阀 if gas_solenoid: action_sequence.append(create_action_log(f"关闭气源电磁阀: {gas_solenoid}", "🚪")) action_sequence.append({ "device_id": gas_solenoid, "action_name": "set_valve_position", "action_kwargs": {"command": "CLOSED"} }) # 关闭气源 action_sequence.append(create_action_log(f"停止气源: {gas_source}", "🔴")) action_sequence.append({ "device_id": gas_source, "action_name": "set_status", "action_kwargs": {"string": "OFF"} }) # 循环间等待 if cycle < repeats - 1: action_sequence.append(create_action_log("等待下一个循环...", "⏳")) action_sequence.append({ "action_name": "wait", "action_kwargs": {"time": 10.0} }) else: action_sequence.append(create_action_log(f"第 {cycle+1}/{repeats} 轮循环完成", "✅")) # === 停止搅拌器 === if stirrer_id: action_sequence.append(create_action_log(f"停止搅拌器: {stirrer_id}", "🛑")) action_sequence.append({ "device_id": stirrer_id, "action_name": "stop_stir", "action_kwargs": {"vessel": {"id": vessel_id},} }) else: action_sequence.append(create_action_log("跳过搅拌器停止", "⏭️")) # === 最终等待 === action_sequence.append(create_action_log("最终稳定等待...", "⏳")) action_sequence.append({ "action_name": "wait", "action_kwargs": {"time": 10.0} }) # === 总结 === total_time = (VACUUM_TIME + REFILL_TIME + 25) * repeats + 20 debug_print(f"抽真空充气协议生成完成: {len(action_sequence)} 个动作, 预计 {total_time:.0f}s") summary_msg = f"抽真空充气协议完成: {vessel_id} (使用 {gas}，{repeats} 次循环)" action_sequence.append(create_action_log(summary_msg, "🎉")) return action_sequence # === 便捷函数 === def generate_nitrogen_purge_protocol(G: nx.DiGraph, vessel: dict, **kwargs) -> List[Dict[str, Any]]: """生成氮气置换协议""" return generate_evacuateandrefill_protocol(G, vessel, "nitrogen", **kwargs) def generate_argon_purge_protocol(G: nx.DiGraph, vessel: dict, **kwargs) -> List[Dict[str, Any]]: """生成氩气置换协议""" return generate_evacuateandrefill_protocol(G, vessel, "argon", **kwargs) def generate_air_purge_protocol(G: nx.DiGraph, vessel: dict, **kwargs) -> List[Dict[str, Any]]: """生成空气置换协议""" return generate_evacuateandrefill_protocol(G, vessel, "air", **kwargs) def generate_inert_atmosphere_protocol(G: nx.DiGraph, vessel: dict, gas: str = "nitrogen", **kwargs) -> List[Dict[str, Any]]: """生成惰性气氛协议""" return generate_evacuateandrefill_protocol(G, vessel, gas, **kwargs) # 测试函数 def test_evacuateandrefill_protocol(): """测试抽真空充气协议""" debug_print("=== 抽真空充气协议测试 ===") debug_print("测试完成") if __name__ == "__main__": test_evacuateandrefill_protocol()