refactor: 深度精简4个协议编译器的装饰性日志 (-335行)

dissolve, pump, stir, adjustph: 移除emoji分隔线、步骤播报、
逐字段参数dump等纯装饰性log，保留错误/警告/关键决策日志。

Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>

.cursor/skills/batch-insert-reagent/SKILL.md

@@ -27,15 +27,14 @@ python -c "import base64,sys; print('Authorization: Lab ' + base64.b64encode(f'{
 
 ### 2. --addr → BASE URL
 
-| `--addr` 值  | BASE                                |
-| ------------ | ----------------------------------- |
-| `test`       | `https://leap-lab.test.bohrium.com` |
-| `uat`        | `https://leap-lab.uat.bohrium.com`  |
-| `local`      | `http://127.0.0.1:48197`            |
-| 不传（默认） | `https://leap-lab.bohrium.com`      |
+| `--addr` 值 | BASE |
+|-------------|------|
+| `test` | `https://uni-lab.test.bohrium.com` |
+| `uat` | `https://uni-lab.uat.bohrium.com` |
+| `local` | `http://127.0.0.1:48197` |
+| 不传（默认） | `https://uni-lab.bohrium.com` |
 
 确认后设置：
-
 ```bash
 BASE="<根据 addr 确定的 URL>"
 AUTH="Authorization: Lab <gen_auth.py 输出的 token>"
@@ -66,7 +65,7 @@ curl -s -X GET "$BASE/api/v1/edge/lab/info" -H "$AUTH"
 返回：
 
 ```json
-{ "code": 0, "data": { "uuid": "xxx", "name": "实验室名称" } }
+{"code": 0, "data": {"uuid": "xxx", "name": "实验室名称"}}
 ```
 
 记住 `data.uuid` 为 `lab_uuid`。
@@ -91,7 +90,6 @@ curl -s -X POST "$BASE/api/v1/lab/reagent" \
 ```
 
 返回成功时包含试剂 UUID：
-
 ```json
 {"code": 0, "data": {"uuid": "xxx", ...}}
 ```
@@ -100,28 +98,28 @@ curl -s -X POST "$BASE/api/v1/lab/reagent" \
 
 ## 试剂字段说明
 
-| 字段                | 类型   | 必填 | 说明                          | 示例                     |
-| ------------------- | ------ | ---- | ----------------------------- | ------------------------ |
-| `lab_uuid`          | string | 是   | 实验室 UUID（从 API #1 获取） | `"8511c672-..."`         |
-| `cas`               | string | 是   | CAS 注册号                    | `"7732-18-3"`            |
-| `name`              | string | 是   | 试剂中文/英文名称             | `"水"`                   |
-| `molecular_formula` | string | 是   | 分子式                        | `"H2O"`                  |
-| `smiles`            | string | 是   | SMILES 表示                   | `"O"`                    |
-| `stock_in_quantity` | number | 是   | 入库数量                      | `10`                     |
-| `unit`              | string | 是   | 单位（字符串，见下表）        | `"mL"`                   |
-| `supplier`          | string | 否   | 供应商名称                    | `"国药集团"`             |
-| `production_date`   | string | 否   | 生产日期（ISO 8601）          | `"2025-11-18T00:00:00Z"` |
-| `expiry_date`       | string | 否   | 过期日期（ISO 8601）          | `"2026-11-18T00:00:00Z"` |
+| 字段 | 类型 | 必填 | 说明 | 示例 |
+|------|------|------|------|------|
+| `lab_uuid` | string | 是 | 实验室 UUID（从 API #1 获取） | `"8511c672-..."` |
+| `cas` | string | 是 | CAS 注册号 | `"7732-18-3"` |
+| `name` | string | 是 | 试剂中文/英文名称 | `"水"` |
+| `molecular_formula` | string | 是 | 分子式 | `"H2O"` |
+| `smiles` | string | 是 | SMILES 表示 | `"O"` |
+| `stock_in_quantity` | number | 是 | 入库数量 | `10` |
+| `unit` | string | 是 | 单位（字符串，见下表） | `"mL"` |
+| `supplier` | string | 否 | 供应商名称 | `"国药集团"` |
+| `production_date` | string | 否 | 生产日期（ISO 8601） | `"2025-11-18T00:00:00Z"` |
+| `expiry_date` | string | 否 | 过期日期（ISO 8601） | `"2026-11-18T00:00:00Z"` |
 
 ### unit 单位值
 
-| 值     | 单位 |
-| ------ | ---- |
+| 值 | 单位 |
+|------|------|
 | `"mL"` | 毫升 |
-| `"L"`  | 升   |
-| `"g"`  | 克   |
+| `"L"` | 升 |
+| `"g"` | 克 |
 | `"kg"` | 千克 |
-| `"瓶"` | 瓶   |
+| `"瓶"` | 瓶 |
 
 > 根据试剂状态选择：液体用 `"mL"` / `"L"`，固体用 `"g"` / `"kg"`。
 
@@ -135,22 +133,8 @@ curl -s -X POST "$BASE/api/v1/lab/reagent" \
 
 ```json
 [
-  {
-    "cas": "7732-18-3",
-    "name": "水",
-    "molecular_formula": "H2O",
-    "smiles": "O",
-    "stock_in_quantity": 10,
-    "unit": "mL"
-  },
-  {
-    "cas": "64-17-5",
-    "name": "乙醇",
-    "molecular_formula": "C2H6O",
-    "smiles": "CCO",
-    "stock_in_quantity": 5,
-    "unit": "L"
-  }
+  {"cas": "7732-18-3", "name": "水", "molecular_formula": "H2O", "smiles": "O", "stock_in_quantity": 10, "unit": "mL"},
+  {"cas": "64-17-5", "name": "乙醇", "molecular_formula": "C2H6O", "smiles": "CCO", "stock_in_quantity": 5, "unit": "L"}
 ]
 ```
 
@@ -176,20 +160,9 @@ cas,name,molecular_formula,smiles,stock_in_quantity,unit,supplier,production_dat
 7732-18-3,水,H2O,O,10,mL,农夫山泉,2025-11-18T00:00:00Z,2026-11-18T00:00:00Z
 ```
 
-### 日期格式规则（重要）
-
-所有日期字段（`production_date`、`expiry_date`）**必须**使用 ISO 8601 完整格式：`YYYY-MM-DDTHH:MM:SSZ`。
-
-- 用户输入 `2025-03-01` → 转换为 `"2025-03-01T00:00:00Z"`
-- 用户输入 `2025/9/1` → 转换为 `"2025-09-01T00:00:00Z"`
-- 用户未提供日期 → 使用当天日期 + `T00:00:00Z`，有效期默认 +1 年
-
-**禁止**发送不带时间部分的日期字符串（如 `"2025-03-01"`），API 会拒绝。
-
 ### 执行与汇报
 
 每次 API 调用后：
-
 1. 检查返回 `code`（0 = 成功）
 2. 记录成功/失败数量
 3. 全部完成后汇总：「共录入 N 条试剂，成功 X 条，失败 Y 条」
@@ -199,29 +172,28 @@ cas,name,molecular_formula,smiles,stock_in_quantity,unit,supplier,production_dat
 
 ## 常见试剂速查表
 
-| 名称                  | CAS       | 分子式     | SMILES                               |
-| --------------------- | --------- | ---------- | ------------------------------------ |
-| 水                    | 7732-18-3 | H2O        | O                                    |
-| 乙醇                  | 64-17-5   | C2H6O      | CCO                                  |
-| 乙酸                  | 64-19-7   | C2H4O2     | CC(O)=O                              |
-| 甲醇                  | 67-56-1   | CH4O       | CO                                   |
-| 丙酮                  | 67-64-1   | C3H6O      | CC(C)=O                              |
-| 二甲基亚砜(DMSO)      | 67-68-5   | C2H6OS     | CS(C)=O                              |
-| 乙酸乙酯              | 141-78-6  | C4H8O2     | CCOC(C)=O                            |
-| 二氯甲烷              | 75-09-2   | CH2Cl2     | ClCCl                                |
-| 四氢呋喃(THF)         | 109-99-9  | C4H8O      | C1CCOC1                              |
-| N,N-二甲基甲酰胺(DMF) | 68-12-2   | C3H7NO     | CN(C)C=O                             |
-| 氯仿                  | 67-66-3   | CHCl3      | ClC(Cl)Cl                            |
-| 乙腈                  | 75-05-8   | C2H3N      | CC#N                                 |
-| 甲苯                  | 108-88-3  | C7H8       | Cc1ccccc1                            |
-| 正己烷                | 110-54-3  | C6H14      | CCCCCC                               |
-| 异丙醇                | 67-63-0   | C3H8O      | CC(C)O                               |
-| 盐酸                  | 7647-01-0 | HCl        | Cl                                   |
-| 硫酸                  | 7664-93-9 | H2SO4      | OS(O)(=O)=O                          |
-| 氢氧化钠              | 1310-73-2 | NaOH       | [Na]O                                |
-| 碳酸钠                | 497-19-8  | Na2CO3     | [Na]OC([O-])=O.[Na+]                 |
-| 氯化钠                | 7647-14-5 | NaCl       | [Na]Cl                               |
-| 乙二胺四乙酸(EDTA)    | 60-00-4   | C10H16N2O8 | OC(=O)CN(CCN(CC(O)=O)CC(O)=O)CC(O)=O |
+| 名称 | CAS | 分子式 | SMILES |
+|------|-----|--------|--------|
+| 水 | 7732-18-3 | H2O | O |
+| 乙醇 | 64-17-5 | C2H6O | CCO |
+| 甲醇 | 67-56-1 | CH4O | CO |
+| 丙酮 | 67-64-1 | C3H6O | CC(C)=O |
+| 二甲基亚砜(DMSO) | 67-68-5 | C2H6OS | CS(C)=O |
+| 乙酸乙酯 | 141-78-6 | C4H8O2 | CCOC(C)=O |
+| 二氯甲烷 | 75-09-2 | CH2Cl2 | ClCCl |
+| 四氢呋喃(THF) | 109-99-9 | C4H8O | C1CCOC1 |
+| N,N-二甲基甲酰胺(DMF) | 68-12-2 | C3H7NO | CN(C)C=O |
+| 氯仿 | 67-66-3 | CHCl3 | ClC(Cl)Cl |
+| 乙腈 | 75-05-8 | C2H3N | CC#N |
+| 甲苯 | 108-88-3 | C7H8 | Cc1ccccc1 |
+| 正己烷 | 110-54-3 | C6H14 | CCCCCC |
+| 异丙醇 | 67-63-0 | C3H8O | CC(C)O |
+| 盐酸 | 7647-01-0 | HCl | Cl |
+| 硫酸 | 7664-93-9 | H2SO4 | OS(O)(=O)=O |
+| 氢氧化钠 | 1310-73-2 | NaOH | [Na]O |
+| 碳酸钠 | 497-19-8 | Na2CO3 | [Na]OC([O-])=O.[Na+] |
+| 氯化钠 | 7647-14-5 | NaCl | [Na]Cl |
+| 乙二胺四乙酸(EDTA) | 60-00-4 | C10H16N2O8 | OC(=O)CN(CCN(CC(O)=O)CC(O)=O)CC(O)=O |
 
 > 此表仅供快速参考。对于不在表中的试剂，agent 应根据化学知识推断或提示用户补充。
 

.cursor/skills/batch-submit-experiment/SKILL.md

@@ -1,13 +1,11 @@
 ---
 name: batch-submit-experiment
-description: Batch submit experiments (notebooks) to the Uni-Lab cloud platform (leap-lab) — list workflows, generate node_params from registry schemas, submit multiple rounds, check notebook status. Use when the user wants to submit experiments, create notebooks, batch run workflows, check experiment status, or mentions 提交实验/批量实验/notebook/实验轮次/实验状态.
+description: Batch submit experiments (notebooks) to Uni-Lab platform — list workflows, generate node_params from registry schemas, submit multiple rounds. Use when the user wants to submit experiments, create notebooks, batch run workflows, or mentions 提交实验/批量实验/notebook/实验轮次.
 ---
 
-# Uni-Lab 批量提交实验指南
+# 批量提交实验指南
 
-通过 Uni-Lab 云端 API 批量提交实验（notebook），支持多轮实验参数配置。根据 workflow 模板详情和本地设备注册表自动生成 `node_params` 模板。
-
-> **重要**：本指南中的 `Authorization: Lab <token>` 是 **Uni-Lab 平台专用的认证方式**，`Lab` 是 Uni-Lab 的 auth scheme 关键字，**不是** HTTP Basic 认证。请勿将其替换为 `Basic`。
+通过云端 API 批量提交实验（notebook），支持多轮实验参数配置。根据 workflow 模板详情和本地设备注册表自动生成 `node_params` 模板。
 
 ## 前置条件（缺一不可）
 
@@ -20,28 +18,25 @@ description: Batch submit experiments (notebooks) to the Uni-Lab cloud platform
 生成 AUTH token（任选一种方式）：
 
 ```bash
-# 方式一：Python 一行生成（注意：scheme 是 "Lab" 不是 "Basic"）
+# 方式一：Python 一行生成
 python -c "import base64,sys; print('Authorization: Lab ' + base64.b64encode(f'{sys.argv[1]}:{sys.argv[2]}'.encode()).decode())" <ak> <sk>
 
 # 方式二：手动计算
 # base64(ak:sk) → Authorization: Lab <token>
-# ⚠️ 这里的 "Lab" 是 Uni-Lab 平台的 auth scheme，绝对不能用 "Basic" 替代
 ```
 
 ### 2. --addr → BASE URL
 
-| `--addr` 值  | BASE                                |
-| ------------ | ----------------------------------- |
-| `test`       | `https://leap-lab.test.bohrium.com` |
-| `uat`        | `https://leap-lab.uat.bohrium.com`  |
-| `local`      | `http://127.0.0.1:48197`            |
-| 不传（默认） | `https://leap-lab.bohrium.com`      |
+| `--addr` 值 | BASE |
+|-------------|------|
+| `test` | `https://uni-lab.test.bohrium.com` |
+| `uat` | `https://uni-lab.uat.bohrium.com` |
+| `local` | `http://127.0.0.1:48197` |
+| 不传（默认） | `https://uni-lab.bohrium.com` |
 
 确认后设置：
-
 ```bash
 BASE="<根据 addr 确定的 URL>"
-# ⚠️ Auth scheme 必须是 "Lab"（Uni-Lab 专用），不是 "Basic"
 AUTH="Authorization: Lab <上面命令输出的 token>"
 ```
 
@@ -49,23 +44,22 @@ AUTH="Authorization: Lab <上面命令输出的 token>"
 
 **批量提交实验时需要本地注册表来解析 workflow 节点的参数 schema。**
 
-**必须先用 Glob 工具搜索文件**，不要直接猜测路径：
+按优先级搜索：
 
 ```
-Glob: **/req_device_registry_upload.json
+<workspace 根目录>/unilabos_data/req_device_registry_upload.json
+<workspace 根目录>/req_device_registry_upload.json
 ```
 
-常见位置（仅供参考，以 Glob 实际结果为准）：
-- `<workspace>/unilabos_data/req_device_registry_upload.json`
-- `<workspace>/req_device_registry_upload.json`
+也可直接 Glob 搜索：`**/req_device_registry_upload.json`
 
 找到后**检查文件修改时间**并告知用户。超过 1 天提醒用户是否需要重新启动 `unilab`。
 
-**如果 Glob 搜索无结果** → 告知用户先运行 `unilab` 启动命令，等注册表生成后再执行。可跳过此步，但将无法自动生成参数模板，需要用户手动填写 `param`。
+**如果文件不存在** → 告知用户先运行 `unilab` 启动命令，等注册表生成后再执行。可跳过此步，但将无法自动生成参数模板，需要用户手动填写 `param`。
 
 ### 4. workflow_uuid（目标工作流）
 
-用户需要提供要提交的 workflow UUID。如果用户不确定，通过 API #3 列出可用 workflow 供选择。
+用户需要提供要提交的 workflow UUID。如果用户不确定，通过 API #2 列出可用 workflow 供选择。
 
 **四项全部就绪后才可开始。**
 
@@ -74,9 +68,8 @@ Glob: **/req_device_registry_upload.json
 在整个对话过程中，agent 需要记住以下状态，避免重复询问用户：
 
 - `lab_uuid` — 实验室 UUID（首次通过 API #1 自动获取，**不需要问用户**）
-- `project_uuid` — 项目 UUID（通过 API #2 列出项目列表，**让用户选择**）
 - `workflow_uuid` — 工作流 UUID（用户提供或从列表选择）
-- `workflow_nodes` — workflow 中各 action 节点的 uuid、设备 ID、动作名（从 API #4 获取）
+- `workflow_nodes` — workflow 中各 action 节点的 uuid、设备 ID、动作名（从 API #3 获取）
 
 ## 请求约定
 
@@ -99,46 +92,12 @@ curl -s -X GET "$BASE/api/v1/edge/lab/info" -H "$AUTH"
 返回：
 
 ```json
-{ "code": 0, "data": { "uuid": "xxx", "name": "实验室名称" } }
+{"code": 0, "data": {"uuid": "xxx", "name": "实验室名称"}}
 ```
 
 记住 `data.uuid` 为 `lab_uuid`。
 
-### 2. 列出实验室项目（让用户选择项目）
-
-```bash
-curl -s -X GET "$BASE/api/v1/lab/project/list?lab_uuid=$lab_uuid" -H "$AUTH"
-```
-
-返回：
-
-```json
-{
-  "code": 0,
-  "data": {
-    "items": [
-      {
-        "uuid": "1b3f249a-...",
-        "name": "bt",
-        "description": null,
-        "status": "active",
-        "created_at": "2026-04-09T14:31:28+08:00"
-      },
-      {
-        "uuid": "b6366243-...",
-        "name": "default",
-        "description": "默认项目",
-        "status": "active",
-        "created_at": "2026-03-26T11:13:36+08:00"
-      }
-    ]
-  }
-}
-```
-
-展示 `data.items[]` 中每个项目的 `name` 和 `uuid`，让用户选择。用户**必须**选择一个项目，记住 `project_uuid`（即选中项目的 `uuid`），后续创建 notebook 时需要提供。
-
-### 3. 列出可用 workflow
+### 2. 列出可用 workflow
 
 ```bash
 curl -s -X GET "$BASE/api/v1/lab/workflow/workflows?page=1&page_size=20&lab_uuid=$lab_uuid" -H "$AUTH"
@@ -146,14 +105,13 @@ curl -s -X GET "$BASE/api/v1/lab/workflow/workflows?page=1&page_size=20&lab_uuid
 
 返回 workflow 列表，展示给用户选择。列出每个 workflow 的 `uuid` 和 `name`。
 
-### 4. 获取 workflow 模板详情
+### 3. 获取 workflow 模板详情
 
 ```bash
 curl -s -X GET "$BASE/api/v1/lab/workflow/template/detail/$workflow_uuid" -H "$AUTH"
 ```
 
 返回 workflow 的完整结构，包含所有 action 节点信息。需要从响应中提取：
-
 - 每个 action 节点的 `node_uuid`
 - 每个节点对应的设备 ID（`resource_template_name`）
 - 每个节点的动作名（`node_template_name`）
@@ -161,7 +119,7 @@ curl -s -X GET "$BASE/api/v1/lab/workflow/template/detail/$workflow_uuid" -H "$A
 
 > **注意**：此 API 返回格式可能因版本不同而有差异。首次调用时，先打印完整响应分析结构，再提取节点信息。常见的节点字段路径为 `data.nodes[]` 或 `data.workflow_nodes[]`。
 
-### 5. 提交实验（创建 notebook）
+### 4. 提交实验（创建 notebook）
 
 ```bash
 curl -s -X POST "$BASE/api/v1/lab/notebook" \
@@ -173,45 +131,34 @@ curl -s -X POST "$BASE/api/v1/lab/notebook" \
 
 ```json
 {
-  "lab_uuid": "<lab_uuid>",
-  "project_uuid": "<project_uuid>",
-  "workflow_uuid": "<workflow_uuid>",
-  "name": "<实验名称>",
-  "node_params": [
-    {
-      "sample_uuids": ["<样品UUID1>", "<样品UUID2>"],
-      "datas": [
+    "lab_uuid": "<lab_uuid>",
+    "workflow_uuid": "<workflow_uuid>",
+    "name": "<实验名称>",
+    "node_params": [
         {
-          "node_uuid": "<workflow中的节点UUID>",
-          "param": {},
-          "sample_params": [
-            {
-              "container_uuid": "<容器UUID>",
-              "sample_value": {
-                "liquid_names": "<液体名称>",
-                "volumes": 1000
-              }
-            }
-          ]
+            "sample_uuids": ["<样品UUID1>", "<样品UUID2>"],
+            "datas": [
+                {
+                    "node_uuid": "<workflow中的节点UUID>",
+                    "param": {},
+                    "sample_params": [
+                        {
+                            "container_uuid": "<容器UUID>",
+                            "sample_value": {
+                                "liquid_names": "<液体名称>",
+                                "volumes": 1000
+                            }
+                        }
+                    ]
+                }
+            ]
         }
-      ]
-    }
-  ]
+    ]
 }
 ```
 
 > **注意**：`sample_uuids` 必须是 **UUID 数组**（`[]uuid.UUID`），不是字符串。无样品时传空数组 `[]`。
 
-### 6. 查询 notebook 状态
-
-提交成功后，使用返回的 notebook UUID 查询执行状态：
-
-```bash
-curl -s -X GET "$BASE/api/v1/lab/notebook/status?uuid=$notebook_uuid" -H "$AUTH"
-```
-
-提交后应**立即查询一次**状态，确认 notebook 已被正确接收并开始调度。
-
 ---
 
 ## Notebook 请求体详解
@@ -225,25 +172,25 @@ curl -s -X GET "$BASE/api/v1/lab/notebook/status?uuid=$notebook_uuid" -H "$AUTH"
 
 ### 每轮的字段
 
-| 字段           | 类型          | 说明                                      |
-| -------------- | ------------- | ----------------------------------------- |
+| 字段 | 类型 | 说明 |
+|------|------|------|
 | `sample_uuids` | array\<uuid\> | 该轮实验的样品 UUID 数组，无样品时传 `[]` |
-| `datas`        | array         | 该轮中每个 workflow 节点的参数配置        |
+| `datas` | array | 该轮中每个 workflow 节点的参数配置 |
 
 ### datas 中每个节点
 
-| 字段            | 类型   | 说明                                         |
-| --------------- | ------ | -------------------------------------------- |
-| `node_uuid`     | string | workflow 模板中的节点 UUID（从 API #4 获取） |
-| `param`         | object | 动作参数（根据本地注册表 schema 填写）       |
-| `sample_params` | array  | 样品相关参数（液体名、体积等）               |
+| 字段 | 类型 | 说明 |
+|------|------|------|
+| `node_uuid` | string | workflow 模板中的节点 UUID（从 API #3 获取） |
+| `param` | object | 动作参数（根据本地注册表 schema 填写） |
+| `sample_params` | array | 样品相关参数（液体名、体积等） |
 
 ### sample_params 中每条
 
-| 字段             | 类型   | 说明                                                 |
-| ---------------- | ------ | ---------------------------------------------------- |
-| `container_uuid` | string | 容器 UUID                                            |
-| `sample_value`   | object | 样品值，如 `{"liquid_names": "水", "volumes": 1000}` |
+| 字段 | 类型 | 说明 |
+|------|------|------|
+| `container_uuid` | string | 容器 UUID |
+| `sample_value` | object | 样品值，如 `{"liquid_names": "水", "volumes": 1000}` |
 
 ---
 
@@ -264,7 +211,6 @@ python scripts/gen_notebook_params.py \
 > 脚本位于本文档同级目录下的 `scripts/gen_notebook_params.py`。
 
 脚本会：
-
 1. 调用 workflow detail API 获取所有 action 节点
 2. 读取本地注册表，为每个节点查找对应的 action schema
 3. 生成 `notebook_template.json`，包含：
@@ -276,7 +222,7 @@ python scripts/gen_notebook_params.py \
 
 如果脚本不可用或注册表不存在：
 
-1. 调用 API #4 获取 workflow 详情
+1. 调用 API #3 获取 workflow 详情
 2. 找到每个 action 节点的 `node_uuid`
 3. 在本地注册表中查找对应设备的 `action_value_mappings`：
    ```
@@ -302,11 +248,8 @@ python scripts/gen_notebook_params.py \
               "properties": {
                 "goal": {
                   "properties": {
-                    "asp_vols": {
-                      "type": "array",
-                      "items": { "type": "number" }
-                    },
-                    "sources": { "type": "array" }
+                    "asp_vols": {"type": "array", "items": {"type": "number"}},
+                    "sources": {"type": "array"}
                   },
                   "required": ["asp_vols", "sources"]
                 }
@@ -332,15 +275,13 @@ Task Progress:
 - [ ] Step 1: 确认 ak/sk → 生成 AUTH token
 - [ ] Step 2: 确认 --addr → 设置 BASE URL
 - [ ] Step 3: GET /edge/lab/info → 获取 lab_uuid
-- [ ] Step 4: GET /lab/project/list → 列出项目，让用户选择 → 获取 project_uuid
-- [ ] Step 5: 确认 workflow_uuid（用户提供或从 GET #3 列表选择）
-- [ ] Step 6: GET workflow detail (#4) → 提取各节点 uuid、设备ID、动作名
-- [ ] Step 7: 定位本地注册表 req_device_registry_upload.json
-- [ ] Step 8: 运行 gen_notebook_params.py 或手动匹配 → 生成 node_params 模板
-- [ ] Step 9: 引导用户填写每轮的参数（sample_uuids、param、sample_params）
-- [ ] Step 10: 构建完整请求体（含 project_uuid）→ POST /lab/notebook 提交
-- [ ] Step 11: 检查返回结果，记录 notebook UUID
-- [ ] Step 12: GET /lab/notebook/status → 查询 notebook 状态，确认已调度
+- [ ] Step 4: 确认 workflow_uuid（用户提供或从 GET #2 列表选择）
+- [ ] Step 5: GET workflow detail (#3) → 提取各节点 uuid、设备ID、动作名
+- [ ] Step 6: 定位本地注册表 req_device_registry_upload.json
+- [ ] Step 7: 运行 gen_notebook_params.py 或手动匹配 → 生成 node_params 模板
+- [ ] Step 8: 引导用户填写每轮的参数（sample_uuids、param、sample_params）
+- [ ] Step 9: 构建完整请求体 → POST /lab/notebook 提交
+- [ ] Step 10: 检查返回结果，确认提交成功
 ```
 
 ---

.cursor/skills/batch-submit-experiment/scripts/gen_notebook_params.py

@@ -7,7 +7,7 @@
 
 选项:
   --auth <token>          Lab token（base64(ak:sk) 的结果，不含 "Lab " 前缀）
-  --base <url>            API 基础 URL（如 https://leap-lab.test.bohrium.com）
+  --base <url>            API 基础 URL（如 https://uni-lab.test.bohrium.com）
   --workflow-uuid <uuid>  目标 workflow 的 UUID
   --registry <path>       本地注册表文件路径（默认自动搜索）
   --rounds <n>            实验轮次数（默认 1）
@@ -17,7 +17,7 @@
 示例:
   python gen_notebook_params.py \\
     --auth YTFmZDlkNGUtxxxx \\
-    --base https://leap-lab.test.bohrium.com \\
+    --base https://uni-lab.test.bohrium.com \\
     --workflow-uuid abc-123-def \\
     --rounds 2
 """
@@ -265,7 +265,6 @@ def generate_template(nodes, registry_index, rounds):
 
     return {
         "lab_uuid": "$TODO_LAB_UUID",
-        "project_uuid": "$TODO_PROJECT_UUID",
         "workflow_uuid": "$TODO_WORKFLOW_UUID",
         "name": "$TODO_EXPERIMENT_NAME",
         "node_params": node_params,

.cursor/skills/create-device-skill/SKILL.md

@@ -40,13 +40,13 @@ python ./scripts/gen_auth.py --config <config.py>
 
 决定 API 请求发往哪个服务器。从启动命令的 `--addr` 参数获取：
 
-| `--addr` 值    | BASE URL                            |
-| -------------- | ----------------------------------- |
-| `test`         | `https://leap-lab.test.bohrium.com` |
-| `uat`          | `https://leap-lab.uat.bohrium.com`  |
-| `local`        | `http://127.0.0.1:48197`            |
-| 不传（默认）   | `https://leap-lab.bohrium.com`      |
-| 其他自定义 URL | 直接使用该 URL                      |
+| `--addr` 值 | BASE URL |
+|-------------|----------|
+| `test` | `https://uni-lab.test.bohrium.com` |
+| `uat` | `https://uni-lab.uat.bohrium.com` |
+| `local` | `http://127.0.0.1:48197` |
+| 不传（默认） | `https://uni-lab.bohrium.com` |
+| 其他自定义 URL | 直接使用该 URL |
 
 #### 必备项 ③：req_device_registry_upload.json（设备注册表）
 
@@ -54,11 +54,11 @@ python ./scripts/gen_auth.py --config <config.py>
 
 **推断 working_dir**（即 `unilabos_data` 所在目录）：
 
-| 条件                 | working_dir 取值                                         |
-| -------------------- | -------------------------------------------------------- |
+| 条件 | working_dir 取值 |
+|------|------------------|
 | 传了 `--working_dir` | `<working_dir>/unilabos_data/`（若子目录已存在则直接用） |
-| 仅传了 `--config`    | `<config 文件所在目录>/unilabos_data/`                   |
-| 都没传               | `<当前工作目录>/unilabos_data/`                          |
+| 仅传了 `--config` | `<config 文件所在目录>/unilabos_data/` |
+| 都没传 | `<当前工作目录>/unilabos_data/` |
 
 **按优先级搜索文件**：
 
@@ -84,6 +84,24 @@ python ./scripts/gen_auth.py --config <config.py>
 python ./scripts/extract_device_actions.py --registry <找到的文件路径>
 ```
 
+#### 完整示例
+
+用户提供：
+
+```
+--ak a1fd9d4e-xxxx-xxxx-xxxx-d9a69c09f0fd
+--sk 136ff5c6-xxxx-xxxx-xxxx-a03e301f827b
+--addr test
+--port 8003
+--disable_browser
+```
+
+从中提取：
+- ✅ ak/sk → 运行 `gen_auth.py` 得到 `AUTH="Authorization: Lab YTFmZDlk..."`
+- ✅ addr=test → `BASE=https://uni-lab.test.bohrium.com`
+- ✅ 搜索 `unilabos_data/req_device_registry_upload.json` → 找到并确认时间
+- ✅ 用户指明目标设备 → 如 `liquid_handler.prcxi`
+
 **四项全部就绪后才进入 Step 1。**
 
 ### Step 1 — 列出可用设备
@@ -111,7 +129,6 @@ python ./scripts/extract_device_actions.py [--registry <path>] <device_id> ./ski
 脚本会显示设备的 Python 源码路径和类名，方便阅读源码了解参数含义。
 
 每个 action 生成一个 JSON 文件，包含：
-
 - `type` — 作为 API 调用的 `action_type`
 - `schema` — 完整 JSON Schema（含 `properties.goal.properties` 参数定义）
 - `goal` — goal 字段映射（含占位符 `$placeholder`）
@@ -119,14 +136,13 @@ python ./scripts/extract_device_actions.py [--registry <path>] <device_id> ./ski
 
 ### Step 3 — 写 action-index.md
 
-按模板为每个 action 写条目（**必须包含 `action_type`**）：
+按模板为每个 action 写条目：
 
 ```markdown
 ### `<action_name>`
 
 <用途描述（一句话）>
 
-- **action_type**: `<从 actions/<name>.json 的 type 字段获取>`
 - **Schema**: [`actions/<filename>.json`](actions/<filename>.json)
 - **核心参数**: `param1`, `param2`（从 schema.required 获取）
 - **可选参数**: `param3`, `param4`
@@ -134,8 +150,6 @@ python ./scripts/extract_device_actions.py [--registry <path>] <device_id> ./ski
 ```
 
 描述规则：
-
-- **每个 action 必须标注 `action_type`**（从 JSON 的 `type` 字段读取），这是 API #9 调用时的必填参数，传错会导致任务永远卡住
 - 从 `schema.properties` 读参数列表（schema 已提升为 goal 内容）
 - 从 `schema.required` 区分核心/可选参数
 - 按功能分类（移液、枪头、外设等）
@@ -144,14 +158,12 @@ python ./scripts/extract_device_actions.py [--registry <path>] <device_id> ./ski
   - `unilabos_devices` → **DeviceSlot**，填入路径字符串如 `"/host_node"`（从资源树筛选 type=device）
   - `unilabos_nodes` → **NodeSlot**，填入路径字符串如 `"/PRCXI/PRCXI_Deck"`（资源树中任意节点）
   - `unilabos_class` → **ClassSlot**，填入类名字符串如 `"container"`（从注册表查找）
-  - `unilabos_formulation` → **FormulationSlot**，填入配方数组 `[{well_name, liquids: [{name, volume}]}]`（well_name 为目标物料的 name）
 - array 类型字段 → `[{id, name, uuid}, ...]`
 - 特殊：`create_resource` 的 `res_id`（ResourceSlot）可填不存在的路径
 
 ### Step 4 — 写 SKILL.md
 
-直接复用 `unilab-device-api` 的 API 模板，修改：
-
+直接复用 `unilab-device-api` 的 API 模板（10 个 endpoint），修改：
 - 设备名称
 - Action 数量
 - 目录列表
@@ -159,96 +171,43 @@ python ./scripts/extract_device_actions.py [--registry <path>] <device_id> ./ski
 - **AUTH 头** — 使用 Step 0 中 `gen_auth.py` 生成的 `Authorization: Lab <token>`（不要硬编码 `Api` 类型的 key）
 - **Python 源码路径** — 在 SKILL.md 开头注明设备对应的源码文件，方便参考参数含义
 - **Slot 字段表** — 列出本设备哪些 action 的哪些字段需要填入 Slot（物料/设备/节点/类名）
-- **action_type 速查表** — 在 API #9 说明后面紧跟一个表格，列出每个 action 对应的 `action_type` 值（从 JSON `type` 字段提取），方便 agent 快速查找而无需打开 JSON 文件
 
 API 模板结构：
 
 ```markdown
 ## 设备信息
-
 - device_id, Python 源码路径, 设备类名
 
 ## 前置条件（缺一不可）
-
 - ak/sk → AUTH, --addr → BASE URL
 
-## 请求约定
-
-- Windows 平台必须用 curl.exe（非 PowerShell 的 curl 别名）
-
 ## Session State
+- lab_uuid（通过 API #1 自动匹配，不要问用户）, device_name
 
-- lab_uuid（通过 GET /edge/lab/info 直接获取，不要问用户）, device_name
-
-## API Endpoints
-
-# - #1 GET /edge/lab/info → 直接拿到 lab_uuid
-
-# - #2 创建工作流 POST /lab/workflow/owner → 拼 URL 告知用户
-
-# - #3 创建节点 POST /edge/workflow/node
-
-# body: {workflow_uuid, resource_template_name: "<device_id>", node_template_name: "<action_name>"}
-
-# - #4 删除节点 DELETE /lab/workflow/nodes
-
-# - #5 更新节点参数 PATCH /lab/workflow/node
-
-# - #6 查询节点 handles POST /lab/workflow/node-handles
-
-# body: {node_uuids: ["uuid1","uuid2"]} → 返回各节点的 handle_uuid
-
-# - #7 批量创建边 POST /lab/workflow/edges
-
-# body: {edges: [{source_node_uuid, target_node_uuid, source_handle_uuid, target_handle_uuid}]}
-
-# - #8 启动工作流 POST /lab/workflow/{uuid}/run
-
-# - #9 运行设备单动作 POST /lab/mcp/run/action（⚠️ action_type 必须从 action-index.md 或 actions/<name>.json 的 type 字段获取，传错会导致任务永远卡住）
-
-# - #10 查询任务状态 GET /lab/mcp/task/{task_uuid}
-
-# - #11 运行工作流单节点 POST /lab/mcp/run/workflow/action
-
-# - #12 获取资源树 GET /lab/material/download/{lab_uuid}
-
-# - #13 获取工作流模板详情 GET /lab/workflow/template/detail/{workflow_uuid}
-
-# 返回 workflow 完整结构：data.nodes[] 含每个节点的 uuid、name、param、device_name、handles
-
-# - #14 按名称查询物料模板 GET /lab/material/template/by-name?lab_uuid=&name=
-
-# 返回 res_template_uuid，用于 #15 创建物料时的必填字段
-
-# - #15 创建物料节点 POST /edge/material/node
-
-# body: {res_template_uuid(从#14获取), name(自定义), display_name, parent_uuid?(从#12获取), ...}
-
-# - #16 更新物料节点 PUT /edge/material/node
-
-# body: {uuid(从#12获取), display_name?, description?, init_param_data?, data?, ...}
+## API Endpoints (10 个)
+# 注意：
+# - #1 获取 lab 列表 + 自动匹配 lab_uuid（遍历 is_admin 的 lab，
+#   调用 /lab/info/{uuid} 比对 access_key == ak）
+# - #2 创建工作流用 POST /lab/workflow
+# - #10 获取资源树路径含 lab_uuid: /lab/material/download/{lab_uuid}
 
 ## Placeholder Slot 填写规则
-
 - unilabos_resources → ResourceSlot → {"id":"/path/name","name":"name","uuid":"xxx"}
 - unilabos_devices → DeviceSlot → "/parent/device" 路径字符串
 - unilabos_nodes → NodeSlot → "/parent/node" 路径字符串
 - unilabos_class → ClassSlot → "class_name" 字符串
-- unilabos_formulation → FormulationSlot → [{well_name, liquids: [{name, volume}]}] 配方数组
 - 特例：create_resource 的 res_id 允许填不存在的路径
 - 列出本设备所有 Slot 字段、类型及含义
 
 ## 渐进加载策略
-
 ## 完整工作流 Checklist
 ```
 
 ### Step 5 — 验证
 
 检查文件完整性：
-
-- [ ] `SKILL.md` 包含 API endpoint（#1 获取 lab_uuid、#2-#7 工作流/节点/边、#8-#11 运行/查询、#12 资源树、#13 工作流模板详情、#14-#16 物料管理）
-- [ ] `SKILL.md` 包含 Placeholder Slot 填写规则（ResourceSlot / DeviceSlot / NodeSlot / ClassSlot / FormulationSlot + create_resource 特例）和本设备的 Slot 字段表
+- [ ] `SKILL.md` 包含 10 个 API endpoint
+- [ ] `SKILL.md` 包含 Placeholder Slot 填写规则（ResourceSlot / DeviceSlot / NodeSlot / ClassSlot + create_resource 特例）和本设备的 Slot 字段表
 - [ ] `action-index.md` 列出所有 action 并有描述
 - [ ] `actions/` 目录中每个 action 有对应 JSON 文件
 - [ ] JSON 文件包含 `type`, `schema`（已提升为 goal 内容）, `goal`, `goal_default`, `placeholder_keys` 字段
@@ -290,202 +249,71 @@ API 模板结构：
 ```
 
 > **注意**：`schema` 已由脚本从原始 `schema.properties.goal` 提升为顶层，直接包含参数定义。
-> `schema.properties` 中的字段即为 API 创建节点返回的 `data.param` 中的字段，PATCH 更新时直接修改 `param` 即可。
+> `schema.properties` 中的字段即为 API 请求 `param.goal` 中的字段。
 
 ## Placeholder Slot 类型体系
 
-`placeholder_keys` / `_unilabos_placeholder_info` 中有 5 种值，对应不同的填写方式：
+`placeholder_keys` / `_unilabos_placeholder_info` 中有 4 种值，对应不同的填写方式：
 
-| placeholder 值         | Slot 类型       | 填写格式                                              | 选取范围                                  |
-| ---------------------- | --------------- | ----------------------------------------------------- | ----------------------------------------- |
-| `unilabos_resources`   | ResourceSlot    | `{"id": "/path/name", "name": "name", "uuid": "xxx"}` | 仅**物料**节点（不含设备）                |
-| `unilabos_devices`     | DeviceSlot      | `"/parent/device_name"`                               | 仅**设备**节点（type=device），路径字符串 |
-| `unilabos_nodes`       | NodeSlot        | `"/parent/node_name"`                                 | **设备 + 物料**，即所有节点，路径字符串   |
-| `unilabos_class`       | ClassSlot       | `"class_name"`                                        | 注册表中已上报的资源类 name               |
-| `unilabos_formulation` | FormulationSlot | `[{well_name, liquids: [{name, volume}]}]`            | 资源树中物料节点的 **name**，配合液体配方 |
+| placeholder 值 | Slot 类型 | 填写格式 | 选取范围 |
+|---------------|-----------|---------|---------|
+| `unilabos_resources` | ResourceSlot | `{"id": "/path/name", "name": "name", "uuid": "xxx"}` | 仅**物料**节点（不含设备） |
+| `unilabos_devices` | DeviceSlot | `"/parent/device_name"` | 仅**设备**节点（type=device），路径字符串 |
+| `unilabos_nodes` | NodeSlot | `"/parent/node_name"` | **设备 + 物料**，即所有节点，路径字符串 |
+| `unilabos_class` | ClassSlot | `"class_name"` | 注册表中已上报的资源类 name |
 
 ### ResourceSlot（`unilabos_resources`）
 
 最常见的类型。从资源树中选取**物料**节点（孔板、枪头盒、试剂槽等）：
 
-- 单个：`{"id": "/workstation/container1", "name": "container1", "uuid": "ff149a9a-..."}`
-- 数组：`[{"id": "/path/a", "name": "a", "uuid": "xxx"}, ...]`
-- `id` 从 parent 计算的路径格式，根据 action 语义选择正确的物料
-
-> **特例**：`create_resource` 的 `res_id`，目标物料可能尚不存在，直接填期望路径，不需要 uuid。
-
-### DeviceSlot / NodeSlot / ClassSlot
-
-- **DeviceSlot**（`unilabos_devices`）：路径字符串如 `"/host_node"`，仅 type=device 的节点
-- **NodeSlot**（`unilabos_nodes`）：路径字符串如 `"/PRCXI/PRCXI_Deck"`，设备 + 物料均可选
-- **ClassSlot**（`unilabos_class`）：类名字符串如 `"container"`，从 `req_resource_registry_upload.json` 查找
-
-### FormulationSlot（`unilabos_formulation`）
-
-描述**液体配方**：向哪些容器中加入哪些液体及体积。
-
 ```json
-[
-  {
-    "sample_uuid": "",
-    "well_name": "bottle_A1",
-    "liquids": [{ "name": "LiPF6", "volume": 0.6 }]
-  }
-]
+{"id": "/workstation/container1", "name": "container1", "uuid": "ff149a9a-2cb8-419d-8db5-d3ba056fb3c2"}
 ```
 
-- `well_name` — 目标物料的 **name**（从资源树取，不是 `id` 路径）
-- `liquids[]` — 液体列表，每条含 `name`（试剂名）和 `volume`（体积，单位由上下文决定；pylabrobot 内部统一 uL）
-- `sample_uuid` — 样品 UUID，无样品传 `""`
-- 与 ResourceSlot 的区别：ResourceSlot 指向物料本身，FormulationSlot 引用物料名并附带配方信息
+- 单个（schema type=object）：`{"id": "/path/name", "name": "name", "uuid": "xxx"}`
+- 数组（schema type=array）：`[{"id": "/path/a", "name": "a", "uuid": "xxx"}, ...]`
+- `id` 本身是从 parent 计算的路径格式
+- 根据 action 语义选择正确的物料（如 `sources` = 液体来源，`targets` = 目标位置）
 
-### 通过 API #12 获取资源树
+> **特例**：`create_resource` 的 `res_id` 字段，目标物料可能**尚不存在**，此时直接填写期望的路径（如 `"/workstation/container1"`），不需要 uuid。
+
+### DeviceSlot（`unilabos_devices`）
+
+填写**设备路径字符串**。从资源树中筛选 type=device 的节点，从 parent 计算路径：
+
+```
+"/host_node"
+"/bioyond_cell/reaction_station"
+```
+
+- 只填路径字符串，不需要 `{id, uuid}` 对象
+- 根据 action 语义选择正确的设备（如 `target_device_id` = 目标设备）
+
+### NodeSlot（`unilabos_nodes`）
+
+范围 = 设备 + 物料。即资源树中**所有节点**都可以选，填写**路径字符串**：
+
+```
+"/PRCXI/PRCXI_Deck"
+```
+
+- 使用场景：当参数既可能指向物料也可能指向设备时（如 `PumpTransferProtocol` 的 `from_vessel`/`to_vessel`，`create_resource` 的 `parent`）
+
+### ClassSlot（`unilabos_class`）
+
+填写注册表中已上报的**资源类 name**。从本地 `req_resource_registry_upload.json` 中查找：
+
+```
+"container"
+```
+
+### 通过 API #10 获取资源树
 
 ```bash
 curl -s -X GET "$BASE/api/v1/lab/material/download/$lab_uuid" -H "$AUTH"
 ```
 
-注意 `lab_uuid` 在路径中（不是查询参数）。返回结构：
-
-```json
-{
-  "code": 0,
-  "data": {
-    "nodes": [
-      {"name": "host_node", "uuid": "c3ec1e68-...", "type": "device", "parent": ""},
-      {"name": "PRCXI", "uuid": "e249c9a6-...", "type": "device", "parent": ""},
-      {"name": "PRCXI_Deck", "uuid": "fb6a8b71-...", "type": "deck", "parent": "PRCXI"}
-    ],
-    "edges": [...]
-  }
-}
-```
-
-- `data.nodes[]` — 所有节点（设备 + 物料），每个节点含 `name`、`uuid`、`type`、`parent`
-- `type` 区分设备（`device`）和物料（`deck`、`container`、`resource` 等）
-- `parent` 为父节点名称（空字符串表示顶级）
-- 填写 Slot 时根据 placeholder 类型筛选：ResourceSlot 取非 device 节点，DeviceSlot 取 device 节点
-- 创建/更新物料时：`parent_uuid` 取父节点的 `uuid`，更新目标的 `uuid` 取节点自身的 `uuid`
-
-## 物料管理 API
-
-设备 Skill 除了设备动作外，还需支持物料节点的创建和参数设定，用于在资源树中动态管理物料。
-
-典型流程：先通过 **#14 按名称查询模板** 获取 `res_template_uuid` → 再通过 **#15 创建物料** → 之后可通过 **#16 更新物料** 修改属性。更新时需要的 `uuid` 和 `parent_uuid` 均从 **#12 资源树下载** 获取。
-
-### API #14 — 按名称查询物料模板
-
-创建物料前，需要先获取物料模板的 UUID。通过模板名称查询：
-
-```bash
-curl -s -X GET "$BASE/api/v1/lab/material/template/by-name?lab_uuid=$lab_uuid&name=<template_name>" -H "$AUTH"
-```
-
-| 参数       | 必填   | 说明                             |
-| ---------- | ------ | -------------------------------- |
-| `lab_uuid` | **是** | 实验室 UUID（从 API #1 获取）    |
-| `name`     | **是** | 物料模板名称（如 `"container"`） |
-
-返回 `code: 0` 时，**`data.uuid`** 即为 `res_template_uuid`，用于 API #15 创建物料。返回还包含 `name`、`resource_type`、`handles`、`config_infos` 等模板元信息。
-
-模板不存在时返回 `code: 10002`，`data` 为空对象。模板名称来自资源注册表中已注册的资源类型。
-
-### API #15 — 创建物料节点
-
-```bash
-curl -s -X POST "$BASE/api/v1/edge/material/node" \
-  -H "$AUTH" -H "Content-Type: application/json" \
-  -d '<request_body>'
-```
-
-请求体：
-
-```json
-{
-  "res_template_uuid": "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx",
-  "name": "my_custom_bottle",
-  "display_name": "自定义瓶子",
-  "parent_uuid": "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx",
-  "type": "",
-  "init_param_data": {},
-  "schema": {},
-  "data": {
-    "liquids": [["water", 1000, "uL"]],
-    "max_volume": 50000
-  },
-  "plate_well_datas": {},
-  "plate_reagent_datas": {},
-  "pose": {},
-  "model": {}
-}
-```
-
-| 字段                  | 必填   | 类型          | 数据来源                            | 说明                                   |
-| --------------------- | ------ | ------------- | ----------------------------------- | -------------------------------------- |
-| `res_template_uuid`   | **是** | string (UUID) | **API #14** 按名称查询获取          | 物料模板 UUID                          |
-| `name`                | 否     | string        | **用户自定义**                      | 节点名称（标识符），可自由命名         |
-| `display_name`        | 否     | string        | 用户自定义                          | 显示名称（UI 展示用）                  |
-| `parent_uuid`         | 否     | string (UUID) | **API #12** 资源树中父节点的 `uuid` | 父节点，为空则创建顶级节点             |
-| `type`                | 否     | string        | 从模板继承                          | 节点类型                               |
-| `init_param_data`     | 否     | object        | 用户指定                            | 初始化参数，覆盖模板默认值             |
-| `data`                | 否     | object        | 用户指定                            | 节点数据，container 见下方 data 格式   |
-| `plate_well_datas`    | 否     | object        | 用户指定                            | 孔板子节点数据（创建带孔位的板时使用） |
-| `plate_reagent_datas` | 否     | object        | 用户指定                            | 试剂关联数据                           |
-| `schema`              | 否     | object        | 从模板继承                          | 自定义 schema，不传则从模板继承        |
-| `pose`                | 否     | object        | 用户指定                            | 位姿信息                               |
-| `model`               | 否     | object        | 用户指定                            | 3D 模型信息                            |
-
-#### container 的 `data` 格式
-
-> **体积单位统一为 uL（微升）**。pylabrobot 体系中所有体积值（`max_volume`、`liquids` 中的 volume）均为 uL。外部如果是 mL 需乘 1000 转换。
-
-```json
-{
-  "liquids": [["water", 1000, "uL"], ["ethanol", 500, "uL"]],
-  "max_volume": 50000
-}
-```
-
-- `liquids` — 液体列表，每条为 `[液体名称, 体积(uL), 单位字符串]`
-- `max_volume` — 容器最大容量（uL），如 50 mL = 50000 uL
-
-### API #16 — 更新物料节点
-
-```bash
-curl -s -X PUT "$BASE/api/v1/edge/material/node" \
-  -H "$AUTH" -H "Content-Type: application/json" \
-  -d '<request_body>'
-```
-
-请求体：
-
-```json
-{
-  "uuid": "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx",
-  "parent_uuid": "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx",
-  "display_name": "新显示名称",
-  "description": "新描述",
-  "init_param_data": {},
-  "data": {},
-  "pose": {},
-  "schema": {},
-  "extra": {}
-}
-```
-
-| 字段              | 必填   | 类型          | 数据来源                              | 说明             |
-| ----------------- | ------ | ------------- | ------------------------------------- | ---------------- |
-| `uuid`            | **是** | string (UUID) | **API #12** 资源树中目标节点的 `uuid` | 要更新的物料节点 |
-| `parent_uuid`     | 否     | string (UUID) | API #12 资源树                        | 移动到新父节点   |
-| `display_name`    | 否     | string        | 用户指定                              | 更新显示名称     |
-| `description`     | 否     | string        | 用户指定                              | 更新描述         |
-| `init_param_data` | 否     | object        | 用户指定                              | 更新初始化参数   |
-| `data`            | 否     | object        | 用户指定                              | 更新节点数据     |
-| `pose`            | 否     | object        | 用户指定                              | 更新位姿         |
-| `schema`          | 否     | object        | 用户指定                              | 更新 schema      |
-| `extra`           | 否     | object        | 用户指定                              | 更新扩展数据     |
-
-> 只传需要更新的字段，未传的字段保持不变。
+注意 `lab_uuid` 在路径中（不是查询参数）。资源树返回所有节点，每个节点包含 `id`（路径格式）、`name`、`uuid`、`type`、`parent` 等字段。填写 Slot 时需根据 placeholder 类型筛选正确的节点。
 
 ## 最终目录结构
 

.cursor/skills/host-node/SKILL.md

@@ -1,251 +0,0 @@
----
-name: host-node
-description: Operate Uni-Lab host node via REST API — create resources, test latency, test resource tree, manual confirm. Use when the user mentions host_node, creating resources, resource management, testing latency, or any host node operation.
----
-
-# Host Node API Skill
-
-## 设备信息
-
-- **device_id**: `host_node`
-- **Python 源码**: `unilabos/ros/nodes/presets/host_node.py`
-- **设备类**: `HostNode`
-- **动作数**: 4（`create_resource`, `test_latency`, `auto-test_resource`, `manual_confirm`）
-
-## 前置条件（缺一不可）
-
-使用本 skill 前，**必须**先确认以下信息。如果缺少任何一项，**立即向用户询问并终止**，等补齐后再继续。
-
-### 1. ak / sk → AUTH
-
-从启动参数 `--ak` `--sk` 或 config.py 中获取，生成 token：`base64(ak:sk)` → `Authorization: Lab <token>`
-
-### 2. --addr → BASE URL
-
-| `--addr` 值  | BASE                                |
-| ------------ | ----------------------------------- |
-| `test`       | `https://leap-lab.test.bohrium.com` |
-| `uat`        | `https://leap-lab.uat.bohrium.com`  |
-| `local`      | `http://127.0.0.1:48197`            |
-| 不传（默认） | `https://leap-lab.bohrium.com`      |
-
-确认后设置：
-
-```bash
-BASE="<根据 addr 确定的 URL>"
-AUTH="Authorization: Lab <token>"
-```
-
-**两项全部就绪后才可发起 API 请求。**
-
-## Session State
-
-在整个对话过程中，agent 需要记住以下状态，避免重复询问用户：
-
-- `lab_uuid` — 实验室 UUID（首次通过 API #1 自动获取，**不需要问用户**）
-- `device_name` — `host_node`
-
-## 请求约定
-
-所有请求使用 `curl -s`，POST/PATCH/DELETE 需加 `Content-Type: application/json`。
-
-> **Windows 平台**必须使用 `curl.exe`（而非 PowerShell 的 `curl` 别名）。
-
----
-
-## API Endpoints
-
-### 1. 获取实验室信息（自动获取 lab_uuid）
-
-```bash
-curl -s -X GET "$BASE/api/v1/edge/lab/info" -H "$AUTH"
-```
-
-返回 `data.uuid` 为 `lab_uuid`，`data.name` 为 `lab_name`。
-
-### 2. 创建工作流
-
-```bash
-curl -s -X POST "$BASE/api/v1/lab/workflow/owner" \
-  -H "$AUTH" -H "Content-Type: application/json" \
-  -d '{"name":"<名称>","lab_uuid":"<lab_uuid>","description":"<描述>"}'
-```
-
-返回 `data.uuid` 为 `workflow_uuid`。创建成功后告知用户链接：`$BASE/laboratory/$lab_uuid/workflow/$workflow_uuid`
-
-### 3. 创建节点
-
-```bash
-curl -s -X POST "$BASE/api/v1/edge/workflow/node" \
-  -H "$AUTH" -H "Content-Type: application/json" \
-  -d '{"workflow_uuid":"<workflow_uuid>","resource_template_name":"host_node","node_template_name":"<action_name>"}'
-```
-
-- `resource_template_name` 固定为 `host_node`
-- `node_template_name` — action 名称（如 `create_resource`, `test_latency`）
-
-### 4. 删除节点
-
-```bash
-curl -s -X DELETE "$BASE/api/v1/lab/workflow/nodes" \
-  -H "$AUTH" -H "Content-Type: application/json" \
-  -d '{"node_uuids":["<uuid1>"],"workflow_uuid":"<workflow_uuid>"}'
-```
-
-### 5. 更新节点参数
-
-```bash
-curl -s -X PATCH "$BASE/api/v1/lab/workflow/node" \
-  -H "$AUTH" -H "Content-Type: application/json" \
-  -d '{"workflow_uuid":"<wf_uuid>","uuid":"<node_uuid>","param":{...}}'
-```
-
-`param` 直接使用创建节点返回的 `data.param` 结构，修改需要填入的字段值。参考 [action-index.md](action-index.md) 确定哪些字段是 Slot。
-
-### 6. 查询节点 handles
-
-```bash
-curl -s -X POST "$BASE/api/v1/lab/workflow/node-handles" \
-  -H "$AUTH" -H "Content-Type: application/json" \
-  -d '{"node_uuids":["<node_uuid_1>","<node_uuid_2>"]}'
-```
-
-### 7. 批量创建边
-
-```bash
-curl -s -X POST "$BASE/api/v1/lab/workflow/edges" \
-  -H "$AUTH" -H "Content-Type: application/json" \
-  -d '{"edges":[{"source_node_uuid":"<uuid>","target_node_uuid":"<uuid>","source_handle_uuid":"<uuid>","target_handle_uuid":"<uuid>"}]}'
-```
-
-### 8. 启动工作流
-
-```bash
-curl -s -X POST "$BASE/api/v1/lab/workflow/<workflow_uuid>/run" -H "$AUTH"
-```
-
-### 9. 运行设备单动作
-
-```bash
-curl -s -X POST "$BASE/api/v1/lab/mcp/run/action" \
-  -H "$AUTH" -H "Content-Type: application/json" \
-  -d '{"lab_uuid":"<lab_uuid>","device_id":"host_node","action":"<action_name>","action_type":"<type>","param":{...}}'
-```
-
-`param` 直接放 goal 里的属性，**不要**再包一层 `{"goal": {...}}`。
-
-> **WARNING: `action_type` 必须正确，传错会导致任务永远卡住无法完成。** 从下表或 `actions/<name>.json` 的 `type` 字段获取。
-
-#### action_type 速查表
-
-| action | action_type |
-|--------|-------------|
-| `test_latency` | `UniLabJsonCommand` |
-| `create_resource` | `ResourceCreateFromOuterEasy` |
-| `auto-test_resource` | `UniLabJsonCommand` |
-| `manual_confirm` | `UniLabJsonCommand` |
-
-### 10. 查询任务状态
-
-```bash
-curl -s -X GET "$BASE/api/v1/lab/mcp/task/<task_uuid>" -H "$AUTH"
-```
-
-### 11. 运行工作流单节点
-
-```bash
-curl -s -X POST "$BASE/api/v1/lab/mcp/run/workflow/action" \
-  -H "$AUTH" -H "Content-Type: application/json" \
-  -d '{"node_uuid":"<node_uuid>"}'
-```
-
-### 12. 获取资源树（物料信息）
-
-```bash
-curl -s -X GET "$BASE/api/v1/lab/material/download/$lab_uuid" -H "$AUTH"
-```
-
-注意 `lab_uuid` 在路径中。返回 `data.nodes[]` 含所有节点（设备 + 物料），每个节点含 `name`、`uuid`、`type`、`parent`。
-
-### 13. 获取工作流模板详情
-
-```bash
-curl -s -X GET "$BASE/api/v1/lab/workflow/template/detail/$workflow_uuid" -H "$AUTH"
-```
-
-> 必须使用 `/lab/workflow/template/detail/{uuid}`，其他路径会返回 404。
-
-### 14. 按名称查询物料模板
-
-```bash
-curl -s -X GET "$BASE/api/v1/lab/material/template/by-name?lab_uuid=$lab_uuid&name=<template_name>" -H "$AUTH"
-```
-
-返回 `data.uuid` 为 `res_template_uuid`，用于 API #15。
-
-### 15. 创建物料节点
-
-```bash
-curl -s -X POST "$BASE/api/v1/edge/material/node" \
-  -H "$AUTH" -H "Content-Type: application/json" \
-  -d '{"res_template_uuid":"<uuid>","name":"<名称>","display_name":"<显示名>","parent_uuid":"<父节点uuid>","data":{...}}'
-```
-
-### 16. 更新物料节点
-
-```bash
-curl -s -X PUT "$BASE/api/v1/edge/material/node" \
-  -H "$AUTH" -H "Content-Type: application/json" \
-  -d '{"uuid":"<节点uuid>","display_name":"<新名称>","data":{...}}'
-```
-
----
-
-## Placeholder Slot 填写规则
-
-| `placeholder_keys` 值 | Slot 类型    | 填写格式                                              | 选取范围               |
-| --------------------- | ------------ | ----------------------------------------------------- | ---------------------- |
-| `unilabos_resources`  | ResourceSlot | `{"id": "/path/name", "name": "name", "uuid": "xxx"}` | 仅物料节点（非设备）   |
-| `unilabos_devices`    | DeviceSlot   | `"/parent/device_name"`                               | 仅设备节点（type=device） |
-| `unilabos_nodes`      | NodeSlot     | `"/parent/node_name"`                                 | 所有节点（设备 + 物料）   |
-| `unilabos_class`      | ClassSlot    | `"class_name"`                                        | 注册表中已注册的资源类    |
-
-### host_node 设备的 Slot 字段表
-
-| Action            | 字段        | Slot 类型    | 说明                           |
-| ----------------- | ----------- | ------------ | ------------------------------ |
-| `create_resource` | `res_id`    | ResourceSlot | 新资源路径（可填不存在的路径） |
-| `create_resource` | `device_id` | DeviceSlot   | 归属设备                       |
-| `create_resource` | `parent`    | NodeSlot     | 父节点路径                     |
-| `create_resource` | `class_name`| ClassSlot    | 资源类名如 `"container"`       |
-| `auto-test_resource` | `resource`  | ResourceSlot | 单个测试物料                |
-| `auto-test_resource` | `resources` | ResourceSlot | 测试物料数组                |
-| `auto-test_resource` | `device`    | DeviceSlot   | 测试设备                    |
-| `auto-test_resource` | `devices`   | DeviceSlot   | 测试设备                    |
-
----
-
-## 渐进加载策略
-
-1. **SKILL.md**（本文件）— API 端点 + session state 管理
-2. **[action-index.md](action-index.md)** — 按分类浏览 4 个动作的描述和核心参数
-3. **[actions/\<name\>.json](actions/)** — 仅在需要构建具体请求时，加载对应 action 的完整 JSON Schema
-
----
-
-## 完整工作流 Checklist
-
-```
-Task Progress:
-- [ ] Step 1: GET /edge/lab/info 获取 lab_uuid
-- [ ] Step 2: 获取资源树 (GET #12) → 记住可用物料
-- [ ] Step 3: 读 action-index.md 确定要用的 action 名
-- [ ] Step 4: 创建工作流 (POST #2) → 记住 workflow_uuid，告知用户链接
-- [ ] Step 5: 创建节点 (POST #3, resource_template_name=host_node) → 记住 node_uuid + data.param
-- [ ] Step 6: 根据 _unilabos_placeholder_info 和资源树，填写 data.param 中的 Slot 字段
-- [ ] Step 7: 更新节点参数 (PATCH #5)
-- [ ] Step 8: 查询节点 handles (POST #6) → 获取各节点的 handle_uuid
-- [ ] Step 9: 批量创建边 (POST #7) → 用 handle_uuid 连接节点
-- [ ] Step 10: 启动工作流 (POST #8) 或运行单节点 (POST #11)
-- [ ] Step 11: 查询任务状态 (GET #10) 确认完成
-```

.cursor/skills/host-node/action-index.md

@@ -1,58 +0,0 @@
-# Action Index — host_node
-
-4 个动作，按功能分类。每个动作的完整 JSON Schema 在 `actions/<name>.json`。
-
----
-
-## 资源管理
-
-### `create_resource`
-
-在资源树中创建新资源（容器、物料等），支持指定位置、类型和初始液体
-
-- **action_type**: `ResourceCreateFromOuterEasy`
-- **Schema**: [`actions/create_resource.json`](actions/create_resource.json)
-- **可选参数**: `res_id`, `device_id`, `class_name`, `parent`, `bind_locations`, `liquid_input_slot`, `liquid_type`, `liquid_volume`, `slot_on_deck`
-- **占位符字段**:
-  - `res_id` — **ResourceSlot**（特例：目标物料可能尚不存在，直接填期望路径）
-  - `device_id` — **DeviceSlot**，填路径字符串如 `"/host_node"`
-  - `parent` — **NodeSlot**，填路径字符串如 `"/workstation/deck"`
-  - `class_name` — **ClassSlot**，填类名如 `"container"`
-
-### `auto-test_resource`
-
-测试资源系统，返回当前资源树和设备列表
-
-- **action_type**: `UniLabJsonCommand`
-- **Schema**: [`actions/test_resource.json`](actions/test_resource.json)
-- **可选参数**: `resource`, `resources`, `device`, `devices`
-- **占位符字段**:
-  - `resource` — **ResourceSlot**，单个物料节点 `{id, name, uuid}`
-  - `resources` — **ResourceSlot**，物料节点数组 `[{id, name, uuid}, ...]`
-  - `device` — **DeviceSlot**，设备路径字符串
-  - `devices` — **DeviceSlot**，设备路径字符串
-
----
-
-## 系统工具
-
-### `test_latency`
-
-测试设备通信延迟，返回 RTT、时间差、任务延迟等指标
-
-- **action_type**: `UniLabJsonCommand`
-- **Schema**: [`actions/test_latency.json`](actions/test_latency.json)
-- **参数**: 无（零参数调用）
-
----
-
-## 人工确认
-
-### `manual_confirm`
-
-创建人工确认节点，等待用户手动确认后继续
-
-- **action_type**: `UniLabJsonCommand`
-- **Schema**: [`actions/manual_confirm.json`](actions/manual_confirm.json)
-- **核心参数**: `timeout_seconds`（超时时间，秒）, `assignee_user_ids`（指派用户 ID 列表）
-- **占位符字段**: `assignee_user_ids` — `unilabos_manual_confirm` 类型

.cursor/skills/host-node/actions/create_resource.json

@@ -1,93 +0,0 @@
-{
-  "type": "ResourceCreateFromOuterEasy",
-  "goal": {
-    "res_id": "res_id",
-    "class_name": "class_name",
-    "parent": "parent",
-    "device_id": "device_id",
-    "bind_locations": "bind_locations",
-    "liquid_input_slot": "liquid_input_slot[]",
-    "liquid_type": "liquid_type[]",
-    "liquid_volume": "liquid_volume[]",
-    "slot_on_deck": "slot_on_deck"
-  },
-  "schema": {
-    "type": "object",
-    "properties": {
-      "res_id": {
-        "type": "string"
-      },
-      "device_id": {
-        "type": "string"
-      },
-      "class_name": {
-        "type": "string"
-      },
-      "parent": {
-        "type": "string"
-      },
-      "bind_locations": {
-        "type": "object",
-        "properties": {
-          "x": {
-            "type": "number",
-            "minimum": -1.7976931348623157e+308,
-            "maximum": 1.7976931348623157e+308
-          },
-          "y": {
-            "type": "number",
-            "minimum": -1.7976931348623157e+308,
-            "maximum": 1.7976931348623157e+308
-          },
-          "z": {
-            "type": "number",
-            "minimum": -1.7976931348623157e+308,
-            "maximum": 1.7976931348623157e+308
-          }
-        },
-        "required": [
-          "x",
-          "y",
-          "z"
-        ],
-        "title": "bind_locations",
-        "additionalProperties": false
-      },
-      "liquid_input_slot": {
-        "type": "array",
-        "items": {
-          "type": "integer"
-        }
-      },
-      "liquid_type": {
-        "type": "array",
-        "items": {
-          "type": "string"
-        }
-      },
-      "liquid_volume": {
-        "type": "array",
-        "items": {
-          "type": "number"
-        }
-      },
-      "slot_on_deck": {
-        "type": "string"
-      }
-    },
-    "required": [],
-    "_unilabos_placeholder_info": {
-      "res_id": "unilabos_resources",
-      "device_id": "unilabos_devices",
-      "parent": "unilabos_nodes",
-      "class_name": "unilabos_class"
-    }
-  },
-  "goal_default": {},
-  "placeholder_keys": {
-    "res_id": "unilabos_resources",
-    "device_id": "unilabos_devices",
-    "parent": "unilabos_nodes",
-    "class_name": "unilabos_class"
-  }
-}

.cursor/skills/host-node/actions/manual_confirm.json

@@ -1,32 +0,0 @@
-{
-  "type": "UniLabJsonCommand",
-  "goal": {
-    "timeout_seconds": "timeout_seconds",
-    "assignee_user_ids": "assignee_user_ids"
-  },
-  "schema": {
-    "type": "object",
-    "properties": {
-      "timeout_seconds": {
-        "type": "integer"
-      },
-      "assignee_user_ids": {
-        "type": "array",
-        "items": {
-          "type": "string"
-        }
-      }
-    },
-    "required": [
-      "timeout_seconds",
-      "assignee_user_ids"
-    ],
-    "_unilabos_placeholder_info": {
-      "assignee_user_ids": "unilabos_manual_confirm"
-    }
-  },
-  "goal_default": {},
-  "placeholder_keys": {
-    "assignee_user_ids": "unilabos_manual_confirm"
-  }
-}

.cursor/skills/host-node/actions/test_latency.json

@@ -1,11 +0,0 @@
-{
-  "type": "UniLabJsonCommand",
-  "goal": {},
-  "schema": {
-    "type": "object",
-    "properties": {},
-    "required": []
-  },
-  "goal_default": {},
-  "placeholder_keys": {}
-}

.cursor/skills/host-node/actions/test_resource.json

@@ -1,255 +0,0 @@
-{
-  "type": "UniLabJsonCommand",
-  "goal": {
-    "resource": "resource",
-    "resources": "resources",
-    "device": "device",
-    "devices": "devices"
-  },
-  "schema": {
-    "type": "object",
-    "properties": {
-      "resource": {
-        "type": "object",
-        "additionalProperties": false,
-        "properties": {
-          "id": {
-            "type": "string"
-          },
-          "name": {
-            "type": "string"
-          },
-          "sample_id": {
-            "type": "string"
-          },
-          "children": {
-            "type": "array",
-            "items": {
-              "type": "string"
-            }
-          },
-          "parent": {
-            "type": "string"
-          },
-          "type": {
-            "type": "string"
-          },
-          "category": {
-            "type": "string"
-          },
-          "pose": {
-            "type": "object",
-            "properties": {
-              "position": {
-                "type": "object",
-                "properties": {
-                  "x": {
-                    "type": "number",
-                    "minimum": -1.7976931348623157e+308,
-                    "maximum": 1.7976931348623157e+308
-                  },
-                  "y": {
-                    "type": "number",
-                    "minimum": -1.7976931348623157e+308,
-                    "maximum": 1.7976931348623157e+308
-                  },
-                  "z": {
-                    "type": "number",
-                    "minimum": -1.7976931348623157e+308,
-                    "maximum": 1.7976931348623157e+308
-                  }
-                },
-                "required": [
-                  "x",
-                  "y",
-                  "z"
-                ],
-                "title": "position",
-                "additionalProperties": false
-              },
-              "orientation": {
-                "type": "object",
-                "properties": {
-                  "x": {
-                    "type": "number",
-                    "minimum": -1.7976931348623157e+308,
-                    "maximum": 1.7976931348623157e+308
-                  },
-                  "y": {
-                    "type": "number",
-                    "minimum": -1.7976931348623157e+308,
-                    "maximum": 1.7976931348623157e+308
-                  },
-                  "z": {
-                    "type": "number",
-                    "minimum": -1.7976931348623157e+308,
-                    "maximum": 1.7976931348623157e+308
-                  },
-                  "w": {
-                    "type": "number",
-                    "minimum": -1.7976931348623157e+308,
-                    "maximum": 1.7976931348623157e+308
-                  }
-                },
-                "required": [
-                  "x",
-                  "y",
-                  "z",
-                  "w"
-                ],
-                "title": "orientation",
-                "additionalProperties": false
-              }
-            },
-            "required": [
-              "position",
-              "orientation"
-            ],
-            "title": "pose",
-            "additionalProperties": false
-          },
-          "config": {
-            "type": "string"
-          },
-          "data": {
-            "type": "string"
-          }
-        },
-        "title": "resource"
-      },
-      "resources": {
-        "items": {
-          "type": "object",
-          "additionalProperties": false,
-          "properties": {
-            "id": {
-              "type": "string"
-            },
-            "name": {
-              "type": "string"
-            },
-            "sample_id": {
-              "type": "string"
-            },
-            "children": {
-              "type": "array",
-              "items": {
-                "type": "string"
-              }
-            },
-            "parent": {
-              "type": "string"
-            },
-            "type": {
-              "type": "string"
-            },
-            "category": {
-              "type": "string"
-            },
-            "pose": {
-              "type": "object",
-              "properties": {
-                "position": {
-                  "type": "object",
-                  "properties": {
-                    "x": {
-                      "type": "number",
-                      "minimum": -1.7976931348623157e+308,
-                      "maximum": 1.7976931348623157e+308
-                    },
-                    "y": {
-                      "type": "number",
-                      "minimum": -1.7976931348623157e+308,
-                      "maximum": 1.7976931348623157e+308
-                    },
-                    "z": {
-                      "type": "number",
-                      "minimum": -1.7976931348623157e+308,
-                      "maximum": 1.7976931348623157e+308
-                    }
-                  },
-                  "required": [
-                    "x",
-                    "y",
-                    "z"
-                  ],
-                  "title": "position",
-                  "additionalProperties": false
-                },
-                "orientation": {
-                  "type": "object",
-                  "properties": {
-                    "x": {
-                      "type": "number",
-                      "minimum": -1.7976931348623157e+308,
-                      "maximum": 1.7976931348623157e+308
-                    },
-                    "y": {
-                      "type": "number",
-                      "minimum": -1.7976931348623157e+308,
-                      "maximum": 1.7976931348623157e+308
-                    },
-                    "z": {
-                      "type": "number",
-                      "minimum": -1.7976931348623157e+308,
-                      "maximum": 1.7976931348623157e+308
-                    },
-                    "w": {
-                      "type": "number",
-                      "minimum": -1.7976931348623157e+308,
-                      "maximum": 1.7976931348623157e+308
-                    }
-                  },
-                  "required": [
-                    "x",
-                    "y",
-                    "z",
-                    "w"
-                  ],
-                  "title": "orientation",
-                  "additionalProperties": false
-                }
-              },
-              "required": [
-                "position",
-                "orientation"
-              ],
-              "title": "pose",
-              "additionalProperties": false
-            },
-            "config": {
-              "type": "string"
-            },
-            "data": {
-              "type": "string"
-            }
-          },
-          "title": "resources"
-        },
-        "type": "array"
-      },
-      "device": {
-        "type": "string",
-        "description": "device reference"
-      },
-      "devices": {
-        "type": "string",
-        "description": "device reference"
-      }
-    },
-    "required": [],
-    "_unilabos_placeholder_info": {
-      "resource": "unilabos_resources",
-      "resources": "unilabos_resources",
-      "device": "unilabos_devices",
-      "devices": "unilabos_devices"
-    }
-  },
-  "goal_default": {},
-  "placeholder_keys": {
-    "resource": "unilabos_resources",
-    "resources": "unilabos_resources",
-    "device": "unilabos_devices",
-    "devices": "unilabos_devices"
-  }
-}

.cursor/skills/submit-agent-result/SKILL.md

@@ -1,284 +0,0 @@
----
-name: submit-agent-result
-description: Submit historical experiment results (agent_result) to Uni-Lab cloud platform (leap-lab) notebook — read data files, assemble JSON payload, PUT to cloud API. Use when the user wants to submit experiment results, upload agent results, report experiment data, or mentions agent_result/实验结果/历史记录/notebook结果.
----
-
-# Uni-Lab 提交历史实验记录指南
-
-通过 Uni-Lab 云端 API 向已创建的 notebook 提交实验结果数据（agent_result）。支持从 JSON / CSV 文件读取数据，整合后提交。
-
-> **重要**：本指南中的 `Authorization: Lab <token>` 是 **Uni-Lab 平台专用的认证方式**，`Lab` 是 Uni-Lab 的 auth scheme 关键字，**不是** HTTP Basic 认证。请勿将其替换为 `Basic`。
-
-## 前置条件（缺一不可）
-
-使用本指南前，**必须**先确认以下信息。如果缺少任何一项，**立即向用户询问并终止**，等补齐后再继续。
-
-### 1. ak / sk → AUTH
-
-询问用户的启动参数，从 `--ak` `--sk` 或 config.py 中获取。
-
-生成 AUTH token：
-
-```bash
-# ⚠️ 注意：scheme 是 "Lab"（Uni-Lab 专用），不是 "Basic"
-python -c "import base64,sys; print(base64.b64encode(f'{sys.argv[1]}:{sys.argv[2]}'.encode()).decode())" <ak> <sk>
-```
-
-输出即为 token 值，拼接为 `Authorization: Lab <token>`（`Lab` 是 Uni-Lab 平台 auth scheme，不可替换为 `Basic`）。
-
-### 2. --addr → BASE URL
-
-| `--addr` 值  | BASE                                |
-| ------------ | ----------------------------------- |
-| `test`       | `https://leap-lab.test.bohrium.com` |
-| `uat`        | `https://leap-lab.uat.bohrium.com`  |
-| `local`      | `http://127.0.0.1:48197`            |
-| 不传（默认） | `https://leap-lab.bohrium.com`      |
-
-确认后设置：
-
-```bash
-BASE="<根据 addr 确定的 URL>"
-# ⚠️ Auth scheme 必须是 "Lab"（Uni-Lab 专用），不是 "Basic"
-AUTH="Authorization: Lab <上面命令输出的 token>"
-```
-
-### 3. notebook_uuid（**必须询问用户**）
-
-**必须主动询问用户**：「请提供要提交结果的 notebook UUID。」
-
-notebook_uuid 来自之前通过「批量提交实验」创建的实验批次，即 `POST /api/v1/lab/notebook` 返回的 `data.uuid`。
-
-如果用户不记得，可提示：
-
-- 查看之前的对话记录中创建 notebook 时返回的 UUID
-- 或通过平台页面查找对应的 notebook
-
-**绝不能跳过此步骤，没有 notebook_uuid 无法提交。**
-
-### 4. 实验结果数据
-
-用户需要提供实验结果数据，支持以下方式：
-
-| 方式      | 说明                                            |
-| --------- | ----------------------------------------------- |
-| JSON 文件 | 直接作为 `agent_result` 的内容合并              |
-| CSV 文件  | 转为 `{"文件名": [行数据...]}` 格式             |
-| 手动指定  | 用户直接告知 key-value 数据，由 agent 构建 JSON |
-
-**四项全部就绪后才可开始。**
-
-## Session State
-
-在整个对话过程中，agent 需要记住以下状态：
-
-- `lab_uuid` — 实验室 UUID（通过 API #1 自动获取，**不需要问用户**）
-- `notebook_uuid` — 目标 notebook UUID（**必须询问用户**）
-
-## 请求约定
-
-所有请求使用 `curl -s`，PUT 需加 `Content-Type: application/json`。
-
-> **Windows 平台**必须使用 `curl.exe`（而非 PowerShell 的 `curl` 别名），示例中的 `curl` 均指 `curl.exe`。
->
-> **PowerShell JSON 传参**：PowerShell 中 `-d '{"key":"value"}'` 会因引号转义失败。请将 JSON 写入临时文件，用 `-d '@tmp_body.json'`（单引号包裹 `@`，否则 `@` 会被 PowerShell 解析为 splatting 运算符导致报错）。
-
----
-
-## API Endpoints
-
-### 1. 获取实验室信息（自动获取 lab_uuid）
-
-```bash
-curl -s -X GET "$BASE/api/v1/edge/lab/info" -H "$AUTH"
-```
-
-返回：
-
-```json
-{ "code": 0, "data": { "uuid": "xxx", "name": "实验室名称" } }
-```
-
-记住 `data.uuid` 为 `lab_uuid`。
-
-### 2. 提交实验结果（agent_result）
-
-```bash
-curl -s -X PUT "$BASE/api/v1/lab/notebook/agent-result" \
-  -H "$AUTH" -H "Content-Type: application/json" \
-  -d '<request_body>'
-```
-
-请求体结构：
-
-```json
-{
-    "notebook_uuid": "<notebook_uuid>",
-    "agent_result": {
-        "<key1>": "<value1>",
-        "<key2>": 123,
-        "<nested_key>": {"a": 1, "b": 2},
-        "<array_key>": [{"col1": "v1", "col2": "v2"}, ...]
-    }
-}
-```
-
-> **注意**：HTTP 方法是 **PUT**（不是 POST）。
-
-#### 必要字段
-
-| 字段            | 类型          | 说明                                        |
-| --------------- | ------------- | ------------------------------------------- |
-| `notebook_uuid` | string (UUID) | 目标 notebook 的 UUID，从批量提交实验时获取 |
-| `agent_result`  | object        | 实验结果数据，任意 JSON 对象                |
-
-#### agent_result 内容格式
-
-`agent_result` 接受**任意 JSON 对象**，常见格式：
-
-**简单键值对**：
-
-```json
-{
-  "avg_rtt_ms": 12.5,
-  "status": "success",
-  "test_count": 5
-}
-```
-
-**包含嵌套结构**：
-
-```json
-{
-  "summary": { "total": 100, "passed": 98, "failed": 2 },
-  "measurements": [
-    { "sample_id": "S001", "value": 3.14, "unit": "mg/mL" },
-    { "sample_id": "S002", "value": 2.71, "unit": "mg/mL" }
-  ]
-}
-```
-
-**从 CSV 文件导入**（脚本自动转换）：
-
-```json
-{
-  "experiment_data": [
-    { "温度": 25, "压力": 101.3, "产率": 0.85 },
-    { "温度": 30, "压力": 101.3, "产率": 0.91 }
-  ]
-}
-```
-
----
-
-## 整合脚本
-
-本文档同级目录下的 `scripts/prepare_agent_result.py` 可自动读取文件并构建请求体。
-
-### 用法
-
-```bash
-python scripts/prepare_agent_result.py \
-    --notebook-uuid <uuid> \
-    --files data1.json data2.csv \
-    [--auth <token>] \
-    [--base <BASE_URL>] \
-    [--submit] \
-    [--output <output.json>]
-```
-
-| 参数              | 必选       | 说明                                            |
-| ----------------- | ---------- | ----------------------------------------------- |
-| `--notebook-uuid` | 是         | 目标 notebook UUID                              |
-| `--files`         | 是         | 输入文件路径（支持多个，JSON / CSV）            |
-| `--auth`          | 提交时必选 | Lab token（base64(ak:sk)）                      |
-| `--base`          | 提交时必选 | API base URL                                    |
-| `--submit`        | 否         | 加上此标志则直接提交到云端                      |
-| `--output`        | 否         | 输出 JSON 路径（默认 `agent_result_body.json`） |
-
-### 文件合并规则
-
-| 文件类型              | 合并方式                                     |
-| --------------------- | -------------------------------------------- |
-| `.json`（dict）       | 字段直接合并到 `agent_result` 顶层           |
-| `.json`（list/other） | 以文件名为 key 放入 `agent_result`           |
-| `.csv`                | 以文件名（不含扩展名）为 key，值为行对象数组 |
-
-多个文件的字段会合并。JSON dict 中的重复 key 后者覆盖前者。
-
-### 示例
-
-```bash
-# 仅生成请求体文件（不提交）
-python scripts/prepare_agent_result.py \
-    --notebook-uuid 73c67dca-c8cc-4936-85a0-329106aa7cca \
-    --files results.json measurements.csv
-
-# 生成并直接提交
-python scripts/prepare_agent_result.py \
-    --notebook-uuid 73c67dca-c8cc-4936-85a0-329106aa7cca \
-    --files results.json \
-    --auth YTFmZDlkNGUt... \
-    --base https://leap-lab.test.bohrium.com \
-    --submit
-```
-
----
-
-## 手动构建方式
-
-如果不使用脚本，也可手动构建请求体：
-
-1. 将实验结果数据组装为 JSON 对象
-2. 写入临时文件：
-
-```json
-{
-    "notebook_uuid": "<uuid>",
-    "agent_result": { ... }
-}
-```
-
-3. 用 curl 提交：
-
-```bash
-curl -s -X PUT "$BASE/api/v1/lab/notebook/agent-result" \
-  -H "$AUTH" -H "Content-Type: application/json" \
-  -d '@tmp_body.json'
-```
-
----
-
-## 完整工作流 Checklist
-
-```
-Task Progress:
-- [ ] Step 1: 确认 ak/sk → 生成 AUTH token
-- [ ] Step 2: 确认 --addr → 设置 BASE URL
-- [ ] Step 3: GET /edge/lab/info → 获取 lab_uuid
-- [ ] Step 4: **询问用户** notebook_uuid（必须，不可跳过）
-- [ ] Step 5: 确认实验结果数据来源（文件路径或手动数据）
-- [ ] Step 6: 运行 prepare_agent_result.py 或手动构建请求体
-- [ ] Step 7: PUT /lab/notebook/agent-result 提交
-- [ ] Step 8: 检查返回结果，确认提交成功
-```
-
----
-
-## 常见问题
-
-### Q: notebook_uuid 从哪里获取？
-
-从之前「批量提交实验」时 `POST /api/v1/lab/notebook` 的返回值 `data.uuid` 获取。也可以在平台 UI 中查找对应的 notebook。
-
-### Q: agent_result 有固定的 schema 吗？
-
-没有严格 schema，接受任意 JSON 对象。但建议包含有意义的字段名和结构化数据，方便后续分析。
-
-### Q: 可以多次提交同一个 notebook 的结果吗？
-
-可以，后续提交会覆盖之前的 agent_result。
-
-### Q: 认证方式是 Lab 还是 Api？
-
-本指南统一使用 `Authorization: Lab <base64(ak:sk)>` 方式（`Lab` 是 Uni-Lab 平台的 auth scheme，**绝不能用 `Basic` 替代**）。如果用户有独立的 API Key，也可用 `Authorization: Api <key>` 替代。

.cursor/skills/submit-agent-result/scripts/prepare_agent_result.py

@@ -1,133 +0,0 @@
-"""
-读取实验结果文件（JSON / CSV），整合为 agent_result 请求体并可选提交。
-
-用法:
-    python prepare_agent_result.py \
-        --notebook-uuid <uuid> \
-        --files data1.json data2.csv \
-        [--auth <Lab token>] \
-        [--base <BASE_URL>] \
-        [--submit] \
-        [--output <output.json>]
-
-支持的输入文件格式:
-    - .json  → 直接作为 dict 合并
-    - .csv   → 转为 {"filename": [row_dict, ...]} 格式
-"""
-
-import argparse
-import base64
-import csv
-import json
-import os
-import sys
-from pathlib import Path
-from typing import Any, Dict, List
-
-
-def read_json_file(filepath: str) -> Dict[str, Any]:
-    with open(filepath, "r", encoding="utf-8") as f:
-        return json.load(f)
-
-
-def read_csv_file(filepath: str) -> List[Dict[str, Any]]:
-    rows = []
-    with open(filepath, "r", encoding="utf-8-sig") as f:
-        reader = csv.DictReader(f)
-        for row in reader:
-            converted = {}
-            for k, v in row.items():
-                try:
-                    converted[k] = int(v)
-                except (ValueError, TypeError):
-                    try:
-                        converted[k] = float(v)
-                    except (ValueError, TypeError):
-                        converted[k] = v
-            rows.append(converted)
-    return rows
-
-
-def merge_files(filepaths: List[str]) -> Dict[str, Any]:
-    """将多个文件合并为一个 agent_result dict"""
-    merged: Dict[str, Any] = {}
-    for fp in filepaths:
-        path = Path(fp)
-        ext = path.suffix.lower()
-        key = path.stem
-
-        if ext == ".json":
-            data = read_json_file(fp)
-            if isinstance(data, dict):
-                merged.update(data)
-            else:
-                merged[key] = data
-        elif ext == ".csv":
-            merged[key] = read_csv_file(fp)
-        else:
-            print(f"[警告] 不支持的文件格式: {fp}，跳过", file=sys.stderr)
-
-    return merged
-
-
-def build_request_body(notebook_uuid: str, agent_result: Dict[str, Any]) -> Dict[str, Any]:
-    return {
-        "notebook_uuid": notebook_uuid,
-        "agent_result": agent_result,
-    }
-
-
-def submit(base: str, auth: str, body: Dict[str, Any]) -> Dict[str, Any]:
-    try:
-        import requests
-    except ImportError:
-        print("[错误] 提交需要 requests 库: pip install requests", file=sys.stderr)
-        sys.exit(1)
-
-    url = f"{base}/api/v1/lab/notebook/agent-result"
-    headers = {
-        "Content-Type": "application/json",
-        "Authorization": f"Lab {auth}",
-    }
-    resp = requests.put(url, json=body, headers=headers, timeout=30)
-    return {"status_code": resp.status_code, "body": resp.json() if resp.headers.get("content-type", "").startswith("application/json") else resp.text}
-
-
-def main():
-    parser = argparse.ArgumentParser(description="整合实验结果文件并构建 agent_result 请求体")
-    parser.add_argument("--notebook-uuid", required=True, help="目标 notebook UUID")
-    parser.add_argument("--files", nargs="+", required=True, help="输入文件路径（JSON / CSV）")
-    parser.add_argument("--auth", help="Lab token（base64(ak:sk)）")
-    parser.add_argument("--base", help="API base URL")
-    parser.add_argument("--submit", action="store_true", help="直接提交到云端")
-    parser.add_argument("--output", default="agent_result_body.json", help="输出 JSON 文件路径")
-
-    args = parser.parse_args()
-
-    for fp in args.files:
-        if not os.path.exists(fp):
-            print(f"[错误] 文件不存在: {fp}", file=sys.stderr)
-            sys.exit(1)
-
-    agent_result = merge_files(args.files)
-    body = build_request_body(args.notebook_uuid, agent_result)
-
-    with open(args.output, "w", encoding="utf-8") as f:
-        json.dump(body, f, ensure_ascii=False, indent=2)
-    print(f"[完成] 请求体已保存: {args.output}")
-    print(f"  notebook_uuid: {args.notebook_uuid}")
-    print(f"  agent_result 字段数: {len(agent_result)}")
-    print(f"  合并文件数: {len(args.files)}")
-
-    if args.submit:
-        if not args.auth or not args.base:
-            print("[错误] 提交需要 --auth 和 --base 参数", file=sys.stderr)
-            sys.exit(1)
-        print(f"\n[提交] PUT {args.base}/api/v1/lab/notebook/agent-result ...")
-        result = submit(args.base, args.auth, body)
-        print(f"  HTTP {result['status_code']}")
-        print(f"  响应: {json.dumps(result['body'], ensure_ascii=False)}")
-
-
-if __name__ == "__main__":
-    main()

.cursor/skills/virtual-workbench/SKILL.md

@@ -1,272 +0,0 @@
----
-name: virtual-workbench
-description: Operate Virtual Workbench via REST API — prepare materials, move to heating stations, start heating, move to output, transfer resources. Use when the user mentions virtual workbench, virtual_workbench, 虚拟工作台, heating stations, material processing, or workbench operations.
----
-
-# Virtual Workbench API Skill
-
-## 设备信息
-
-- **device_id**: `virtual_workbench`
-- **Python 源码**: `unilabos/devices/virtual/workbench.py`
-- **设备类**: `VirtualWorkbench`
-- **动作数**: 6（`auto-prepare_materials`, `auto-move_to_heating_station`, `auto-start_heating`, `auto-move_to_output`, `transfer`, `manual_confirm`）
-- **设备描述**: 模拟工作台，包含 1 个机械臂（每次操作 2s，独占锁）和 3 个加热台（每次加热 60s，可并行）
-
-### 典型工作流程
-
-1. `prepare_materials` — 生成 A1-A5 物料（5 个 output handle）
-2. `move_to_heating_station` — 物料并发竞争机械臂，移动到空闲加热台
-3. `start_heating` — 启动加热（3 个加热台可并行）
-4. `move_to_output` — 加热完成后移到输出位置 Cn
-
-## 前置条件（缺一不可）
-
-使用本 skill 前，**必须**先确认以下信息。如果缺少任何一项，**立即向用户询问并终止**，等补齐后再继续。
-
-### 1. ak / sk → AUTH
-
-从启动参数 `--ak` `--sk` 或 config.py 中获取，生成 token：`base64(ak:sk)` → `Authorization: Lab <token>`
-
-### 2. --addr → BASE URL
-
-| `--addr` 值  | BASE                                |
-| ------------ | ----------------------------------- |
-| `test`       | `https://leap-lab.test.bohrium.com` |
-| `uat`        | `https://leap-lab.uat.bohrium.com`  |
-| `local`      | `http://127.0.0.1:48197`            |
-| 不传（默认） | `https://leap-lab.bohrium.com`      |
-
-确认后设置：
-
-```bash
-BASE="<根据 addr 确定的 URL>"
-AUTH="Authorization: Lab <token>"
-```
-
-**两项全部就绪后才可发起 API 请求。**
-
-## Session State
-
-- `lab_uuid` — 实验室 UUID（首次通过 API #1 自动获取，**不需要问用户**）
-- `device_name` — `virtual_workbench`
-
-## 请求约定
-
-所有请求使用 `curl -s`，POST/PATCH/DELETE 需加 `Content-Type: application/json`。
-
-> **Windows 平台**必须使用 `curl.exe`（而非 PowerShell 的 `curl` 别名）。
-
----
-
-## API Endpoints
-
-### 1. 获取实验室信息（自动获取 lab_uuid）
-
-```bash
-curl -s -X GET "$BASE/api/v1/edge/lab/info" -H "$AUTH"
-```
-
-返回 `data.uuid` 为 `lab_uuid`，`data.name` 为 `lab_name`。
-
-### 2. 创建工作流
-
-```bash
-curl -s -X POST "$BASE/api/v1/lab/workflow/owner" \
-  -H "$AUTH" -H "Content-Type: application/json" \
-  -d '{"name":"<名称>","lab_uuid":"<lab_uuid>","description":"<描述>"}'
-```
-
-返回 `data.uuid` 为 `workflow_uuid`。创建成功后告知用户链接：`$BASE/laboratory/$lab_uuid/workflow/$workflow_uuid`
-
-### 3. 创建节点
-
-```bash
-curl -s -X POST "$BASE/api/v1/edge/workflow/node" \
-  -H "$AUTH" -H "Content-Type: application/json" \
-  -d '{"workflow_uuid":"<workflow_uuid>","resource_template_name":"virtual_workbench","node_template_name":"<action_name>"}'
-```
-
-- `resource_template_name` 固定为 `virtual_workbench`
-- `node_template_name` — action 名称（如 `auto-prepare_materials`, `auto-move_to_heating_station`）
-
-### 4. 删除节点
-
-```bash
-curl -s -X DELETE "$BASE/api/v1/lab/workflow/nodes" \
-  -H "$AUTH" -H "Content-Type: application/json" \
-  -d '{"node_uuids":["<uuid1>"],"workflow_uuid":"<workflow_uuid>"}'
-```
-
-### 5. 更新节点参数
-
-```bash
-curl -s -X PATCH "$BASE/api/v1/lab/workflow/node" \
-  -H "$AUTH" -H "Content-Type: application/json" \
-  -d '{"workflow_uuid":"<wf_uuid>","uuid":"<node_uuid>","param":{...}}'
-```
-
-参考 [action-index.md](action-index.md) 确定哪些字段是 Slot。
-
-### 6. 查询节点 handles
-
-```bash
-curl -s -X POST "$BASE/api/v1/lab/workflow/node-handles" \
-  -H "$AUTH" -H "Content-Type: application/json" \
-  -d '{"node_uuids":["<node_uuid_1>","<node_uuid_2>"]}'
-```
-
-### 7. 批量创建边
-
-```bash
-curl -s -X POST "$BASE/api/v1/lab/workflow/edges" \
-  -H "$AUTH" -H "Content-Type: application/json" \
-  -d '{"edges":[{"source_node_uuid":"<uuid>","target_node_uuid":"<uuid>","source_handle_uuid":"<uuid>","target_handle_uuid":"<uuid>"}]}'
-```
-
-### 8. 启动工作流
-
-```bash
-curl -s -X POST "$BASE/api/v1/lab/workflow/<workflow_uuid>/run" -H "$AUTH"
-```
-
-### 9. 运行设备单动作
-
-```bash
-curl -s -X POST "$BASE/api/v1/lab/mcp/run/action" \
-  -H "$AUTH" -H "Content-Type: application/json" \
-  -d '{"lab_uuid":"<lab_uuid>","device_id":"virtual_workbench","action":"<action_name>","action_type":"<type>","param":{...}}'
-```
-
-`param` 直接放 goal 里的属性，**不要**再包一层 `{"goal": {...}}`。
-
-> **WARNING: `action_type` 必须正确，传错会导致任务永远卡住无法完成。** 从下表或 `actions/<name>.json` 的 `type` 字段获取。
-
-#### action_type 速查表
-
-| action | action_type |
-|--------|-------------|
-| `auto-prepare_materials` | `UniLabJsonCommand` |
-| `auto-move_to_heating_station` | `UniLabJsonCommand` |
-| `auto-start_heating` | `UniLabJsonCommand` |
-| `auto-move_to_output` | `UniLabJsonCommand` |
-| `transfer` | `UniLabJsonCommandAsync` |
-| `manual_confirm` | `UniLabJsonCommand` |
-
-### 10. 查询任务状态
-
-```bash
-curl -s -X GET "$BASE/api/v1/lab/mcp/task/<task_uuid>" -H "$AUTH"
-```
-
-### 11. 运行工作流单节点
-
-```bash
-curl -s -X POST "$BASE/api/v1/lab/mcp/run/workflow/action" \
-  -H "$AUTH" -H "Content-Type: application/json" \
-  -d '{"node_uuid":"<node_uuid>"}'
-```
-
-### 12. 获取资源树（物料信息）
-
-```bash
-curl -s -X GET "$BASE/api/v1/lab/material/download/$lab_uuid" -H "$AUTH"
-```
-
-注意 `lab_uuid` 在路径中。返回 `data.nodes[]` 含所有节点（设备 + 物料），每个节点含 `name`、`uuid`、`type`、`parent`。
-
-### 13. 获取工作流模板详情
-
-```bash
-curl -s -X GET "$BASE/api/v1/lab/workflow/template/detail/$workflow_uuid" -H "$AUTH"
-```
-
-> 必须使用 `/lab/workflow/template/detail/{uuid}`，其他路径会返回 404。
-
-### 14. 按名称查询物料模板
-
-```bash
-curl -s -X GET "$BASE/api/v1/lab/material/template/by-name?lab_uuid=$lab_uuid&name=<template_name>" -H "$AUTH"
-```
-
-返回 `data.uuid` 为 `res_template_uuid`，用于 API #15。
-
-### 15. 创建物料节点
-
-```bash
-curl -s -X POST "$BASE/api/v1/edge/material/node" \
-  -H "$AUTH" -H "Content-Type: application/json" \
-  -d '{"res_template_uuid":"<uuid>","name":"<名称>","display_name":"<显示名>","parent_uuid":"<父节点uuid>","data":{...}}'
-```
-
-### 16. 更新物料节点
-
-```bash
-curl -s -X PUT "$BASE/api/v1/edge/material/node" \
-  -H "$AUTH" -H "Content-Type: application/json" \
-  -d '{"uuid":"<节点uuid>","display_name":"<新名称>","data":{...}}'
-```
-
----
-
-## Placeholder Slot 填写规则
-
-| `placeholder_keys` 值 | Slot 类型    | 填写格式                                              | 选取范围               |
-| --------------------- | ------------ | ----------------------------------------------------- | ---------------------- |
-| `unilabos_resources`  | ResourceSlot | `{"id": "/path/name", "name": "name", "uuid": "xxx"}` | 仅物料节点（非设备）   |
-| `unilabos_devices`    | DeviceSlot   | `"/parent/device_name"`                               | 仅设备节点（type=device） |
-| `unilabos_nodes`      | NodeSlot     | `"/parent/node_name"`                                 | 所有节点（设备 + 物料）   |
-| `unilabos_class`      | ClassSlot    | `"class_name"`                                        | 注册表中已注册的资源类    |
-
-### virtual_workbench 设备的 Slot 字段表
-
-| Action            | 字段             | Slot 类型    | 说明                 |
-| ----------------- | ---------------- | ------------ | -------------------- |
-| `transfer`        | `resource`       | ResourceSlot | 待转移物料数组       |
-| `transfer`        | `target_device`  | DeviceSlot   | 目标设备路径         |
-| `transfer`        | `mount_resource` | ResourceSlot | 目标孔位数组         |
-| `manual_confirm`  | `resource`       | ResourceSlot | 确认用物料数组       |
-| `manual_confirm`  | `target_device`  | DeviceSlot   | 确认用目标设备       |
-| `manual_confirm`  | `mount_resource` | ResourceSlot | 确认用目标孔位数组   |
-
-> `prepare_materials`、`move_to_heating_station`、`start_heating`、`move_to_output` 这 4 个动作**无 Slot 字段**，参数为纯数值/整数。
-
----
-
-## 渐进加载策略
-
-1. **SKILL.md**（本文件）— API 端点 + session state 管理 + 设备工作流概览
-2. **[action-index.md](action-index.md)** — 按分类浏览 6 个动作的描述和核心参数
-3. **[actions/\<name\>.json](actions/)** — 仅在需要构建具体请求时，加载对应 action 的完整 JSON Schema
-
----
-
-## 完整工作流 Checklist
-
-```
-Task Progress:
-- [ ] Step 1: GET /edge/lab/info 获取 lab_uuid
-- [ ] Step 2: 获取资源树 (GET #12) → 记住可用物料
-- [ ] Step 3: 读 action-index.md 确定要用的 action 名
-- [ ] Step 4: 创建工作流 (POST #2) → 记住 workflow_uuid，告知用户链接
-- [ ] Step 5: 创建节点 (POST #3, resource_template_name=virtual_workbench) → 记住 node_uuid + data.param
-- [ ] Step 6: 根据 _unilabos_placeholder_info 和资源树，填写 data.param 中的 Slot 字段
-- [ ] Step 7: 更新节点参数 (PATCH #5)
-- [ ] Step 8: 查询节点 handles (POST #6) → 获取各节点的 handle_uuid
-- [ ] Step 9: 批量创建边 (POST #7) → 用 handle_uuid 连接节点
-- [ ] Step 10: 启动工作流 (POST #8) 或运行单节点 (POST #11)
-- [ ] Step 11: 查询任务状态 (GET #10) 确认完成
-```
-
-### 典型 5 物料并发加热工作流示例
-
-```
-prepare_materials (count=5)
-  ├─ channel_1 → move_to_heating_station (material_number=1) → start_heating → move_to_output
-  ├─ channel_2 → move_to_heating_station (material_number=2) → start_heating → move_to_output
-  ├─ channel_3 → move_to_heating_station (material_number=3) → start_heating → move_to_output
-  ├─ channel_4 → move_to_heating_station (material_number=4) → start_heating → move_to_output
-  └─ channel_5 → move_to_heating_station (material_number=5) → start_heating → move_to_output
-```
-
-创建节点时，`prepare_materials` 的 5 个 output handle（`channel_1` ~ `channel_5`）分别连接到 5 个 `move_to_heating_station` 节点的 `material_input` handle。每个 `move_to_heating_station` 的 `heating_station_output` 和 `material_number_output` 连接到对应 `start_heating` 的 `station_id_input` 和 `material_number_input`。

.cursor/skills/virtual-workbench/action-index.md

@@ -1,76 +0,0 @@
-# Action Index — virtual_workbench
-
-6 个动作，按功能分类。每个动作的完整 JSON Schema 在 `actions/<name>.json`。
-
----
-
-## 物料准备
-
-### `auto-prepare_materials`
-
-批量准备物料（虚拟起始节点），生成 A1-A5 物料编号，输出 5 个 handle 供后续节点使用
-
-- **action_type**: `UniLabJsonCommand`
-- **Schema**: [`actions/prepare_materials.json`](actions/prepare_materials.json)
-- **可选参数**: `count`（物料数量，默认 5）
-
----
-
-## 机械臂 & 加热台操作
-
-### `auto-move_to_heating_station`
-
-将物料从 An 位置移动到空闲加热台（竞争机械臂，自动查找空闲加热台）
-
-- **action_type**: `UniLabJsonCommand`
-- **Schema**: [`actions/move_to_heating_station.json`](actions/move_to_heating_station.json)
-- **核心参数**: `material_number`（物料编号，integer）
-
-### `auto-start_heating`
-
-启动指定加热台的加热程序（可并行，3 个加热台同时工作）
-
-- **action_type**: `UniLabJsonCommand`
-- **Schema**: [`actions/start_heating.json`](actions/start_heating.json)
-- **核心参数**: `station_id`（加热台 ID），`material_number`（物料编号）
-
-### `auto-move_to_output`
-
-将加热完成的物料从加热台移动到输出位置 Cn
-
-- **action_type**: `UniLabJsonCommand`
-- **Schema**: [`actions/move_to_output.json`](actions/move_to_output.json)
-- **核心参数**: `station_id`（加热台 ID），`material_number`（物料编号）
-
----
-
-## 物料转移
-
-### `transfer`
-
-异步转移物料到目标设备（通过 ROS 资源转移）
-
-- **action_type**: `UniLabJsonCommandAsync`
-- **Schema**: [`actions/transfer.json`](actions/transfer.json)
-- **核心参数**: `resource`, `target_device`, `mount_resource`
-- **占位符字段**:
-  - `resource` — **ResourceSlot**，待转移的物料数组 `[{id, name, uuid}, ...]`
-  - `target_device` — **DeviceSlot**，目标设备路径字符串
-  - `mount_resource` — **ResourceSlot**，目标孔位数组 `[{id, name, uuid}, ...]`
-
----
-
-## 人工确认
-
-### `manual_confirm`
-
-创建人工确认节点，等待用户手动确认后继续（含物料转移上下文）
-
-- **action_type**: `UniLabJsonCommand`
-- **Schema**: [`actions/manual_confirm.json`](actions/manual_confirm.json)
-- **核心参数**: `resource`, `target_device`, `mount_resource`, `timeout_seconds`, `assignee_user_ids`
-- **占位符字段**:
-  - `resource` — **ResourceSlot**，物料数组
-  - `target_device` — **DeviceSlot**，目标设备路径
-  - `mount_resource` — **ResourceSlot**，目标孔位数组
-  - `assignee_user_ids` — `unilabos_manual_confirm` 类型

.cursor/skills/virtual-workbench/actions/manual_confirm.json

@@ -1,270 +0,0 @@
-{
-  "type": "UniLabJsonCommand",
-  "goal": {
-    "resource": "resource",
-    "target_device": "target_device",
-    "mount_resource": "mount_resource",
-    "timeout_seconds": "timeout_seconds",
-    "assignee_user_ids": "assignee_user_ids"
-  },
-  "schema": {
-    "type": "object",
-    "properties": {
-      "resource": {
-        "items": {
-          "type": "object",
-          "additionalProperties": false,
-          "properties": {
-            "id": {
-              "type": "string"
-            },
-            "name": {
-              "type": "string"
-            },
-            "sample_id": {
-              "type": "string"
-            },
-            "children": {
-              "type": "array",
-              "items": {
-                "type": "string"
-              }
-            },
-            "parent": {
-              "type": "string"
-            },
-            "type": {
-              "type": "string"
-            },
-            "category": {
-              "type": "string"
-            },
-            "pose": {
-              "type": "object",
-              "properties": {
-                "position": {
-                  "type": "object",
-                  "properties": {
-                    "x": {
-                      "type": "number",
-                      "minimum": -1.7976931348623157e+308,
-                      "maximum": 1.7976931348623157e+308
-                    },
-                    "y": {
-                      "type": "number",
-                      "minimum": -1.7976931348623157e+308,
-                      "maximum": 1.7976931348623157e+308
-                    },
-                    "z": {
-                      "type": "number",
-                      "minimum": -1.7976931348623157e+308,
-                      "maximum": 1.7976931348623157e+308
-                    }
-                  },
-                  "required": [
-                    "x",
-                    "y",
-                    "z"
-                  ],
-                  "title": "position",
-                  "additionalProperties": false
-                },
-                "orientation": {
-                  "type": "object",
-                  "properties": {
-                    "x": {
-                      "type": "number",
-                      "minimum": -1.7976931348623157e+308,
-                      "maximum": 1.7976931348623157e+308
-                    },
-                    "y": {
-                      "type": "number",
-                      "minimum": -1.7976931348623157e+308,
-                      "maximum": 1.7976931348623157e+308
-                    },
-                    "z": {
-                      "type": "number",
-                      "minimum": -1.7976931348623157e+308,
-                      "maximum": 1.7976931348623157e+308
-                    },
-                    "w": {
-                      "type": "number",
-                      "minimum": -1.7976931348623157e+308,
-                      "maximum": 1.7976931348623157e+308
-                    }
-                  },
-                  "required": [
-                    "x",
-                    "y",
-                    "z",
-                    "w"
-                  ],
-                  "title": "orientation",
-                  "additionalProperties": false
-                }
-              },
-              "required": [
-                "position",
-                "orientation"
-              ],
-              "title": "pose",
-              "additionalProperties": false
-            },
-            "config": {
-              "type": "string"
-            },
-            "data": {
-              "type": "string"
-            }
-          },
-          "title": "resource"
-        },
-        "type": "array"
-      },
-      "target_device": {
-        "type": "string",
-        "description": "device reference"
-      },
-      "mount_resource": {
-        "items": {
-          "type": "object",
-          "additionalProperties": false,
-          "properties": {
-            "id": {
-              "type": "string"
-            },
-            "name": {
-              "type": "string"
-            },
-            "sample_id": {
-              "type": "string"
-            },
-            "children": {
-              "type": "array",
-              "items": {
-                "type": "string"
-              }
-            },
-            "parent": {
-              "type": "string"
-            },
-            "type": {
-              "type": "string"
-            },
-            "category": {
-              "type": "string"
-            },
-            "pose": {
-              "type": "object",
-              "properties": {
-                "position": {
-                  "type": "object",
-                  "properties": {
-                    "x": {
-                      "type": "number",
-                      "minimum": -1.7976931348623157e+308,
-                      "maximum": 1.7976931348623157e+308
-                    },
-                    "y": {
-                      "type": "number",
-                      "minimum": -1.7976931348623157e+308,
-                      "maximum": 1.7976931348623157e+308
-                    },
-                    "z": {
-                      "type": "number",
-                      "minimum": -1.7976931348623157e+308,
-                      "maximum": 1.7976931348623157e+308
-                    }
-                  },
-                  "required": [
-                    "x",
-                    "y",
-                    "z"
-                  ],
-                  "title": "position",
-                  "additionalProperties": false
-                },
-                "orientation": {
-                  "type": "object",
-                  "properties": {
-                    "x": {
-                      "type": "number",
-                      "minimum": -1.7976931348623157e+308,
-                      "maximum": 1.7976931348623157e+308
-                    },
-                    "y": {
-                      "type": "number",
-                      "minimum": -1.7976931348623157e+308,
-                      "maximum": 1.7976931348623157e+308
-                    },
-                    "z": {
-                      "type": "number",
-                      "minimum": -1.7976931348623157e+308,
-                      "maximum": 1.7976931348623157e+308
-                    },
-                    "w": {
-                      "type": "number",
-                      "minimum": -1.7976931348623157e+308,
-                      "maximum": 1.7976931348623157e+308
-                    }
-                  },
-                  "required": [
-                    "x",
-                    "y",
-                    "z",
-                    "w"
-                  ],
-                  "title": "orientation",
-                  "additionalProperties": false
-                }
-              },
-              "required": [
-                "position",
-                "orientation"
-              ],
-              "title": "pose",
-              "additionalProperties": false
-            },
-            "config": {
-              "type": "string"
-            },
-            "data": {
-              "type": "string"
-            }
-          },
-          "title": "mount_resource"
-        },
-        "type": "array"
-      },
-      "timeout_seconds": {
-        "type": "integer"
-      },
-      "assignee_user_ids": {
-        "type": "array",
-        "items": {
-          "type": "string"
-        }
-      }
-    },
-    "required": [
-      "resource",
-      "target_device",
-      "mount_resource",
-      "timeout_seconds",
-      "assignee_user_ids"
-    ],
-    "_unilabos_placeholder_info": {
-      "resource": "unilabos_resources",
-      "target_device": "unilabos_devices",
-      "mount_resource": "unilabos_resources",
-      "assignee_user_ids": "unilabos_manual_confirm"
-    }
-  },
-  "goal_default": {},
-  "placeholder_keys": {
-    "resource": "unilabos_resources",
-    "target_device": "unilabos_devices",
-    "mount_resource": "unilabos_resources",
-    "assignee_user_ids": "unilabos_manual_confirm"
-  }
-}

.cursor/skills/virtual-workbench/actions/move_to_heating_station.json

@@ -1,19 +0,0 @@
-{
-  "type": "UniLabJsonCommand",
-  "goal": {
-    "material_number": "material_number"
-  },
-  "schema": {
-    "type": "object",
-    "properties": {
-      "material_number": {
-        "type": "integer"
-      }
-    },
-    "required": [
-      "material_number"
-    ]
-  },
-  "goal_default": {},
-  "placeholder_keys": {}
-}

.cursor/skills/virtual-workbench/actions/move_to_output.json

@@ -1,24 +0,0 @@
-{
-  "type": "UniLabJsonCommand",
-  "goal": {
-    "station_id": "station_id",
-    "material_number": "material_number"
-  },
-  "schema": {
-    "type": "object",
-    "properties": {
-      "station_id": {
-        "type": "integer"
-      },
-      "material_number": {
-        "type": "integer"
-      }
-    },
-    "required": [
-      "station_id",
-      "material_number"
-    ]
-  },
-  "goal_default": {},
-  "placeholder_keys": {}
-}

.cursor/skills/virtual-workbench/actions/prepare_materials.json

@@ -1,20 +0,0 @@
-{
-  "type": "UniLabJsonCommand",
-  "goal": {
-    "count": "count"
-  },
-  "schema": {
-    "type": "object",
-    "properties": {
-      "count": {
-        "type": "integer",
-        "default": 5
-      }
-    },
-    "required": []
-  },
-  "goal_default": {
-    "count": 5
-  },
-  "placeholder_keys": {}
-}

.cursor/skills/virtual-workbench/actions/start_heating.json

@@ -1,24 +0,0 @@
-{
-  "type": "UniLabJsonCommand",
-  "goal": {
-    "station_id": "station_id",
-    "material_number": "material_number"
-  },
-  "schema": {
-    "type": "object",
-    "properties": {
-      "station_id": {
-        "type": "integer"
-      },
-      "material_number": {
-        "type": "integer"
-      }
-    },
-    "required": [
-      "station_id",
-      "material_number"
-    ]
-  },
-  "goal_default": {},
-  "placeholder_keys": {}
-}

.cursor/skills/virtual-workbench/actions/transfer.json

@@ -1,255 +0,0 @@
-{
-  "type": "UniLabJsonCommandAsync",
-  "goal": {
-    "resource": "resource",
-    "target_device": "target_device",
-    "mount_resource": "mount_resource"
-  },
-  "schema": {
-    "type": "object",
-    "properties": {
-      "resource": {
-        "items": {
-          "type": "object",
-          "additionalProperties": false,
-          "properties": {
-            "id": {
-              "type": "string"
-            },
-            "name": {
-              "type": "string"
-            },
-            "sample_id": {
-              "type": "string"
-            },
-            "children": {
-              "type": "array",
-              "items": {
-                "type": "string"
-              }
-            },
-            "parent": {
-              "type": "string"
-            },
-            "type": {
-              "type": "string"
-            },
-            "category": {
-              "type": "string"
-            },
-            "pose": {
-              "type": "object",
-              "properties": {
-                "position": {
-                  "type": "object",
-                  "properties": {
-                    "x": {
-                      "type": "number",
-                      "minimum": -1.7976931348623157e+308,
-                      "maximum": 1.7976931348623157e+308
-                    },
-                    "y": {
-                      "type": "number",
-                      "minimum": -1.7976931348623157e+308,
-                      "maximum": 1.7976931348623157e+308
-                    },
-                    "z": {
-                      "type": "number",
-                      "minimum": -1.7976931348623157e+308,
-                      "maximum": 1.7976931348623157e+308
-                    }
-                  },
-                  "required": [
-                    "x",
-                    "y",
-                    "z"
-                  ],
-                  "title": "position",
-                  "additionalProperties": false
-                },
-                "orientation": {
-                  "type": "object",
-                  "properties": {
-                    "x": {
-                      "type": "number",
-                      "minimum": -1.7976931348623157e+308,
-                      "maximum": 1.7976931348623157e+308
-                    },
-                    "y": {
-                      "type": "number",
-                      "minimum": -1.7976931348623157e+308,
-                      "maximum": 1.7976931348623157e+308
-                    },
-                    "z": {
-                      "type": "number",
-                      "minimum": -1.7976931348623157e+308,
-                      "maximum": 1.7976931348623157e+308
-                    },
-                    "w": {
-                      "type": "number",
-                      "minimum": -1.7976931348623157e+308,
-                      "maximum": 1.7976931348623157e+308
-                    }
-                  },
-                  "required": [
-                    "x",
-                    "y",
-                    "z",
-                    "w"
-                  ],
-                  "title": "orientation",
-                  "additionalProperties": false
-                }
-              },
-              "required": [
-                "position",
-                "orientation"
-              ],
-              "title": "pose",
-              "additionalProperties": false
-            },
-            "config": {
-              "type": "string"
-            },
-            "data": {
-              "type": "string"
-            }
-          },
-          "title": "resource"
-        },
-        "type": "array"
-      },
-      "target_device": {
-        "type": "string",
-        "description": "device reference"
-      },
-      "mount_resource": {
-        "items": {
-          "type": "object",
-          "additionalProperties": false,
-          "properties": {
-            "id": {
-              "type": "string"
-            },
-            "name": {
-              "type": "string"
-            },
-            "sample_id": {
-              "type": "string"
-            },
-            "children": {
-              "type": "array",
-              "items": {
-                "type": "string"
-              }
-            },
-            "parent": {
-              "type": "string"
-            },
-            "type": {
-              "type": "string"
-            },
-            "category": {
-              "type": "string"
-            },
-            "pose": {
-              "type": "object",
-              "properties": {
-                "position": {
-                  "type": "object",
-                  "properties": {
-                    "x": {
-                      "type": "number",
-                      "minimum": -1.7976931348623157e+308,
-                      "maximum": 1.7976931348623157e+308
-                    },
-                    "y": {
-                      "type": "number",
-                      "minimum": -1.7976931348623157e+308,
-                      "maximum": 1.7976931348623157e+308
-                    },
-                    "z": {
-                      "type": "number",
-                      "minimum": -1.7976931348623157e+308,
-                      "maximum": 1.7976931348623157e+308
-                    }
-                  },
-                  "required": [
-                    "x",
-                    "y",
-                    "z"
-                  ],
-                  "title": "position",
-                  "additionalProperties": false
-                },
-                "orientation": {
-                  "type": "object",
-                  "properties": {
-                    "x": {
-                      "type": "number",
-                      "minimum": -1.7976931348623157e+308,
-                      "maximum": 1.7976931348623157e+308
-                    },
-                    "y": {
-                      "type": "number",
-                      "minimum": -1.7976931348623157e+308,
-                      "maximum": 1.7976931348623157e+308
-                    },
-                    "z": {
-                      "type": "number",
-                      "minimum": -1.7976931348623157e+308,
-                      "maximum": 1.7976931348623157e+308
-                    },
-                    "w": {
-                      "type": "number",
-                      "minimum": -1.7976931348623157e+308,
-                      "maximum": 1.7976931348623157e+308
-                    }
-                  },
-                  "required": [
-                    "x",
-                    "y",
-                    "z",
-                    "w"
-                  ],
-                  "title": "orientation",
-                  "additionalProperties": false
-                }
-              },
-              "required": [
-                "position",
-                "orientation"
-              ],
-              "title": "pose",
-              "additionalProperties": false
-            },
-            "config": {
-              "type": "string"
-            },
-            "data": {
-              "type": "string"
-            }
-          },
-          "title": "mount_resource"
-        },
-        "type": "array"
-      }
-    },
-    "required": [
-      "resource",
-      "target_device",
-      "mount_resource"
-    ],
-    "_unilabos_placeholder_info": {
-      "resource": "unilabos_resources",
-      "target_device": "unilabos_devices",
-      "mount_resource": "unilabos_resources"
-    }
-  },
-  "goal_default": {},
-  "placeholder_keys": {
-    "resource": "unilabos_resources",
-    "target_device": "unilabos_devices",
-    "mount_resource": "unilabos_resources"
-  }
-}

.cursor/skills/yibin-electrolyte-submit/SKILL.md

@@ -1,483 +0,0 @@
----
-name: yibin-electrolyte-submit
-description: >-
-  通过 Uni-Lab Notebook API 向宜宾电解液工站提交实验，覆盖配液分液（Bioyond LIMS）、
-  扣电组装（CoinCellAssembly）、扣电测试全流程。
-  包含 Excel 解析、formulation 构建、工作流节点参数填写、notebook 提交与状态轮询。
-  Use when the user wants to submit electrolyte experiments, assemble or test coin cells,
-  parse experiment Excel files, build notebook payloads, or mentions
-  宜宾/配液/分液/扣电/电解液实验/notebook提交/CoinCell/BioyondLIMS.
----
-
-# 宜宾电解液产线 API 操作指南
-
-本 skill 覆盖两个设备的完整操作流程：
-1. **配液分液工站** (`bioyond_cell_workstation`) — Bioyond LIMS 配液/分液/转运
-2. **扣电组装站** (`BatteryStation`) — Modbus PLC 扣电组装/数据采集
-
-## 设备信息
-
-| 属性 | 配液分液工站 | 扣电组装站 |
-|------|------------|-----------|
-| device_id | `bioyond_cell_workstation` | `BatteryStation` |
-| 显示名 | 配液分液工站 | 扣电工作站 |
-| 源码 | `unilabos/devices/workstation/bioyond_studio/bioyond_cell/bioyond_cell_workstation.py` | `unilabos/devices/workstation/coin_cell_assembly/coin_cell_assembly.py` |
-| 类名 | `BioyondCellWorkstation` | `CoinCellAssemblyWorkstation` |
-| 通讯 | HTTP REST (Bioyond LIMS API) | Modbus TCP (PLC 寄存器) |
-
-## 前置条件
-
-### 认证信息
-
-```
-AUTH="Authorization: Lab OTdlY2FkNmUtZmZmMi00YjhiLThhOWEtNWM5ODAyOTJmOTUxOmU0OGM2YWJkLTA4ZmEtNDFjMy04NzhhLTc4M2FiODlhZjYxMw=="
-BASE="https://uni-lab.test.bohrium.com"
-```
-
-来源：`--ak 97ecad6e-fff2-4b8b-8a9a-5c980292f951 --sk e48c6abd-08fa-41c3-878a-783ab89af613 --addr test`
-
-### 启动 unilab（云端模式）
-
-> **重要**：提交实验前必须确保 unilab 正在运行且已连接云端 WebSocket。
-
-```powershell
-$env:PYTHONIOENCODING="utf-8"
-conda activate newunilab2603
-cd D:\UniLabdev\Uni-Lab-OS\unilabos\devices\workstation
-unilab -g D:\UniLabdev\Uni-Lab-OS\yibin_electrolyte_config.json --ak 97ecad6e-fff2-4b8b-8a9a-5c980292f951 --sk e48c6abd-08fa-41c3-878a-783ab89af613 --upload_registry --addr test --disable_browser --skip_env_check
-```
-
-**启动要点**：
-1. 必须先激活虚拟环境 `newunilab2603`
-2. 工作目录切到 `unilabos/devices/workstation`（设备驱动所在目录）
-3. `--upload_registry` 将 64 个设备 + 142 个资源注册到云端
-4. `--skip_env_check` + `PYTHONIOENCODING=utf-8` 避免 Windows GBK 编码崩溃
-5. 启动后后台运行，等待日志出现 `Application startup complete` 和 `Host node ready signal published with 3 devices`
-
-**验证连接成功的标志**：
-- 日志出现 `[MessageProcessor] ... wss://uni-lab.test.bohrium.com/api/v1/ws/schedule`
-- 日志出现 `[WebSocketClient] Host node ready signal published with 3 devices`
-- 日志出现 `Resource tree add completed`（资源树同步完成）
-
-### 云端物料上架与入库（启动后必做）
-
-> **在提交实验之前，必须提醒用户完成以下云端操作，否则实验会因物料缺失而失败。**
-
-1. **拖拽上料**：在云端 UI（`$BASE/laboratory/<lab_uuid>`）的资源树视图中，将物料拖拽到对应的仓库/库位上。unilab 启动后资源树会自动同步到云端，但物料的**上架位置**需要用户在 UI 上手动确认或调整。
-
-2. **确认配液物料入库**：确保所有配液实验需要的试剂（如 LiPF6、EC、DMC、EMC 等）已在 LIMS 系统中完成入库。可通过以下方式验证：
-   - 云端 UI 资源树中对应仓库（如"粉末加样头堆栈"、"配液站内试剂仓库"）下有物料节点
-   - 或通过 API #8 获取资源树后检查物料节点是否存在
-
-3. **告知 AI 可以提交**：用户完成上述操作后，告知 AI "物料已上架，可以提交实验"，AI 再执行 notebook 提交流程。
-
-**提醒话术模板**（AI 应在启动成功后发送给用户）：
-```
-unilab 已成功启动并连接云端。提交实验前请完成以下操作：
-1. 在云端 UI 上确认资源树中的物料位置，必要时拖拽调整上料位
-2. 确保配液所需的试剂（粉末、液体）已在 LIMS 中完成入库
-3. 完成后告诉我，我将为您提交实验
-```
-
-### 生成 Action Schema（首次使用）
-
-启动 unilab 后，在 `unilabos_data/` 目录下会生成 `req_device_registry_upload.json`。运行以下命令提取两个设备的 action JSON：
-
-```bash
-python .cursor/skills/create-device-skill/scripts/extract_device_actions.py --registry unilabos_data/req_device_registry_upload.json bioyond_cell_workstation .cursor/skills/yibin-electrolyte-submit/actions/
-python .cursor/skills/create-device-skill/scripts/extract_device_actions.py --registry unilabos_data/req_device_registry_upload.json BatteryStation .cursor/skills/yibin-electrolyte-submit/actions/
-```
-
-## 请求约定
-
-- Windows 平台**必须用 `curl.exe`**（非 PowerShell 的 curl 别名）
-- 所有请求带 `$AUTH` 头
-- URL 格式：`$BASE/api/v1/<endpoint>`
-- POST/PATCH 请求体写入临时 JSON 文件后用 `-d '@tmp.json'` 传参（避免 PowerShell 转义问题）
-- 本地 API 基址：`http://127.0.0.1:8002/api/v1/`
-
-## Session State
-
-每次会话开始时，依次获取以下信息：
-
-```bash
-# 1. lab_uuid
-curl.exe -s -X GET "$BASE/api/v1/edge/lab/info" -H "$AUTH"
-# → data.uuid → $lab_uuid
-
-# 2. project_uuid
-curl.exe -s -X GET "$BASE/api/v1/lab/project/list?lab_uuid=$lab_uuid" -H "$AUTH"
-# → data.items[].uuid/name → 让用户选择或取唯一项 → $project_uuid
-```
-
-## 工作流模板（重要）
-
-> **必须向用户索要已有的工作流模板 UUID 或 URL，不要自行创建。**
->
-> 原因：通过 `edge/workflow/node` API 创建节点会报 `resource_node_template not found`——
-> 云端的工作流节点模板系统和设备注册表是独立的，需要用户在云端 UI 上预先配置好工作流模板。
-
-**获取方式**：
-- 用户提供工作流页面 URL，如 `$BASE/laboratory/<lab_uuid>/workflow/<workflow_uuid>`
-- 从 URL 中提取 `workflow_uuid`
-- 用 API 获取模板详情：
-
-```
-GET /api/v1/lab/workflow/template/detail/<workflow_uuid>
-```
-
-返回 `data.nodes[]`：每个节点的 uuid、name、param、device_name、handles、disabled。
-
-**示例**：
-```
-工作流 URL: https://uni-lab.test.bohrium.com/laboratory/e9ed9102-d709-4741-b7a0-d1e8578e2065/workflow/b49f80d9-58d6-4456-a521-56f4dd39cda0
-→ workflow_uuid = b49f80d9-58d6-4456-a521-56f4dd39cda0
-```
-
-从模板详情中提取**未 disabled** 的节点的 `uuid` 和 `name`，后续提交 notebook 时使用。
-
-## API Endpoints
-
-### #1 获取 lab_uuid
-
-```
-GET /api/v1/edge/lab/info
-```
-
-### #2 列出项目
-
-```
-GET /api/v1/lab/project/list?lab_uuid=$lab_uuid
-```
-
-返回 `data.items[]`，取 `uuid` 和 `name`。
-
-### #3 获取工作流模板详情
-
-```
-GET /api/v1/lab/workflow/template/detail/<workflow_uuid>
-```
-
-返回 `data.nodes[]`：每个节点的 uuid、name、param、device_name、handles。
-提取活跃节点（`disabled != true`）的 `uuid` 用于构建 notebook 请求。
-
-### #4 提交实验（创建 notebook）— 核心 API
-
-```
-POST /api/v1/lab/notebook
-Body: {
-  "lab_uuid": "<lab_uuid>",
-  "project_uuid": "<project_uuid>",
-  "workflow_uuid": "<workflow_uuid>",
-  "name": "<实验名称>",
-  "node_params": [
-    {
-      "sample_uuids": [],
-      "datas": [
-        {
-          "node_uuid": "<模板中的节点UUID>",
-          "param": { <参数键值对> },
-          "sample_params": []
-        }
-      ]
-    }
-  ]
-}
-```
-
-**关键注意事项**：
-- `node_params` 是数组，每个元素代表一轮实验
-- `datas` 中每个节点对应模板中的一个活跃节点
-- `param` 中的字段名**必须使用 Python 函数参数名**，不能用模板中存储的 LIMS 字段名（见下方映射表）
-
-### #5 查询 notebook 状态
-
-```
-GET /api/v1/lab/notebook/status?uuid=<notebook_uuid>
-```
-
-| status | 含义 |
-|--------|------|
-| `running` | 执行中 |
-| `success` | 成功 |
-| `fail` | 失败 |
-
-### #6 运行设备单动作（本地 API）
-
-```
-POST http://127.0.0.1:8002/api/v1/job/add
-Body: {
-  "device_id": "<device_id>",
-  "action": "<action_name>",
-  "action_args": { <参数键值对> },
-  "sample_material": {}
-}
-```
-
-本地 API 可自动解析 `action_type`，无需手动指定。适用于快速调试或云端未连接时。
-
-### #7 查询本地任务状态
-
-```
-GET http://127.0.0.1:8002/api/v1/job/<job_id>/status
-```
-
-| status | 含义 |
-|--------|------|
-| 0 | UNKNOWN |
-| 1 | ACCEPTED |
-| 2 | EXECUTING |
-| 4 | SUCCEEDED |
-| 5 | CANCELED |
-| 6 | ABORTED |
-
-### #8 获取资源树
-
-```
-GET /api/v1/lab/material/download/<lab_uuid>
-```
-
-返回所有节点（`id`, `name`, `uuid`, `type`, `parent`）。填写 Slot 字段时用此接口筛选节点。
-
-## Placeholder Slot 填写规则
-
-action JSON 中 `placeholder_keys` 标记了哪些字段需要填 Slot：
-
-| placeholder 值 | Slot 类型 | 填写格式 |
-|---------------|-----------|---------|
-| `unilabos_resources` | ResourceSlot | `{"id": "/path/name", "name": "name", "uuid": "xxx"}` |
-| `unilabos_devices` | DeviceSlot | `"/parent/device_name"` 路径字符串 |
-| `unilabos_nodes` | NodeSlot | `"/parent/node_name"` 路径字符串 |
-| `unilabos_class` | ClassSlot | `"class_name"` 字符串 |
-| `unilabos_formulation` | FormulationSlot | `[{well_name, liquids: [{name, volume}]}]` |
-
-### ResourceSlot 填写
-
-从 API #8 资源树中筛选**物料**节点：
-
-```json
-{"id": "/bioyond_cell_workstation/YB_Bioyond_Deck/自动堆栈-左", "name": "自动堆栈-左", "uuid": "3a19debc-..."}
-```
-
-数组字段：`[{id, name, uuid}, ...]`
-特例：`create_resource` 的 `res_id` 允许填不存在的路径。
-
-### DeviceSlot 填写
-
-从资源树筛选 `type=device` 的节点，填路径字符串：
-
-```
-"/BatteryStation"
-"/bioyond_cell_workstation"
-```
-
-### FormulationSlot 填写
-
-```json
-[
-  {
-    "sample_uuid": "",
-    "well_name": "YB_PrepBottle_15mL_Carrier_bottle_A1",
-    "liquids": [
-      { "name": "LiPF6", "mass": 12.5 },
-      { "name": "EC", "mass": 50.0 }
-    ]
-  }
-]
-```
-
-`well_name` 从资源树中取物料节点的 `name`。
-
-## 参数名映射（重要的坑）
-
-> 工作流模板中存储的参数名和 Python 函数实际接受的参数名**不一定相同**。
-> 提交 notebook 时必须使用 **Python 函数参数名**。
-
-### `create_orders_formulation` 参数映射
-
-| 模板中的 param 键 | 实际 Python 参数名 | 说明 |
-|-------------------|-------------------|------|
-| `pouch_cell_info` | `pouch_cell_volume` | 软包组装分液体积 (mL) |
-| `conductivity_info` | `conductivity_volume` | 电导测试分液体积 (mL) |
-| `load_shedding_info` | `coin_cell_volume` | 扣电组装分液体积 (mL) |
-| `formulation` | `formulation` | 配方数组（名称一致） |
-| `batch_id` | `batch_id` | 批次号（名称一致） |
-| `bottle_type` | `bottle_type` | 配液瓶类型（名称一致） |
-| `mix_time` | `mix_time` | 混匀时间(秒)（名称一致） |
-| `conductivity_bottle_count` | `conductivity_bottle_count` | 电导瓶数（名称一致） |
-
-当从模板中读到 `param` 包含 `pouch_cell_info` 等 LIMS 字段名时，提交 notebook 时要用右列的 Python 函数参数名。否则会报 `TypeError: got an unexpected keyword argument`。
-
-## 典型工作流
-
-### 方式一：通过 Notebook API 批量提交（推荐）
-
-**适用场景**：多组配方的批量实验，云端管理实验记录
-
-```
-1. 向用户索要工作流模板 URL（不要自行创建）
-2. 获取 lab_uuid（API #1）和 project_uuid（API #2）
-3. 获取工作流模板详情（API #3），提取活跃节点 UUID
-4. 解析用户提供的 Excel 文件，构建 formulation 数组
-5. 提交 notebook（API #4）
-6. 轮询 notebook 状态（API #5）直到完成
-```
-
-**Excel 解析规则**：
-- 全局参数在第一个数据行：`batch_id`、`bottle_type`、`mix_time`、`coin_cell_volume`、`pouch_cell_volume`、`conductivity_volume`、`conductivity_bottle_count`
-- 配方列从"试剂名1"开始，交替排列：试剂名列 + 质量列（以 `(g)` 结尾）
-- 每行一个配方，`order_name` = 配方ID列
-- formulation 中每个配方的 materials 数组只包含 `mass > 0` 的试剂
-
-**node_params 构建**：所有配方放入同一个 round 的同一个 datas 条目中，因为只有一个节点（`create_orders_formulation`）。
-
-### 方式二：设备单步操作（本地 API）
-
-**适用场景**：调试、快速测试
-
-```
-1. 确保 unilab 已在本地启动
-2. 通过 POST http://127.0.0.1:8002/api/v1/job/add 提交任务
-3. 通过 GET /api/v1/job/<job_id>/status 查询状态
-```
-
-### 设备操作流程：配液 → 转运 → 扣电
-
-```
-1. [配液站] scheduler_start_and_auto_feeding  → 启动调度 + 上料
-2. [配液站] create_orders_formulation          → 创建配液实验（配方输入）
-3. [配液站] transfer_3_to_2_to_1_auto         → 分液瓶板转运到扣电站
-4. [扣电站] func_pack_device_init_auto_start_combined → 初始化+自动+启动
-5. [扣电站] func_sendbottle_allpack_multi      → 发送瓶数+批量组装
-```
-
-## 云端使用心得
-
-### 环境准备
-- Windows 必须设置 `$env:PYTHONIOENCODING="utf-8"` 防止编码崩溃
-- 使用 `--skip_env_check` 跳过依赖检查，加快启动
-- 工作目录建议在 `unilabos/devices/workstation` 下启动
-
-### 连接与注册
-- `--upload_registry` 会自动将设备和资源注册到云端
-- WebSocket 连接建立后，本地和云端的资源树会自动同步
-- 注册成功后用户需在云端 UI 完成**物料拖放上架**操作
-- 如果 unilab 断开重连，资源树会重新同步
-
-### 工作流模板
-- **不要自行调用 API 创建工作流或节点**——云端工作流节点模板需要预配置
-- 始终向用户索要已有的工作流模板 URL
-- 从 URL 中提取 `workflow_uuid`，通过 API #3 获取详情
-- 模板中 `disabled: true` 的节点跳过，只处理活跃节点
-
-### Notebook 实验提交
-- Notebook 是云端管理实验的标准方式
-- 一个 notebook 可包含多轮（`node_params` 数组），每轮可包含多组参数
-- 提交后通过 API #5 轮询状态，LIMS 配液流程通常需要较长时间（8 个配方约 30-60 分钟）
-- 实验进度可在云端 UI 和本地 unilab 日志中同步查看
-
-### 常见错误
-| 错误 | 原因 | 解决 |
-|------|------|------|
-| `edge not started error` | unilab 未连接云端 WebSocket | 检查 unilab 是否在运行、重启 |
-| `resource_node_template not found` | 云端没有该设备的工作流模板 | 向用户索要已有模板，不要自行创建 |
-| `got an unexpected keyword argument` | 参数名用了模板字段名而非 Python 函数参数名 | 参照上方映射表转换 |
-| `UnicodeEncodeError: 'gbk'` | Windows 默认编码不支持特殊字符 | 设置 `PYTHONIOENCODING=utf-8` |
-| `parse parameter error` | 云端 API 字段名错误 | `device_id` (非 `device_name`)、`action` (非 `action_name`)、必须带 `action_type` |
-
-## 渐进加载策略
-
-1. 先读本文件了解 API 端点、参数映射和云端注意事项
-2. 需要具体 action 参数时，读 [action-index.md](action-index.md) 查找 action 名称和核心参数
-3. 需要完整 schema 时，读 `actions/<action_name>.json`（需先运行提取命令生成）
-4. 需要理解参数含义时，读设备源码
-
-## 完整 Notebook 提交 Checklist
-
-```
-- [ ] 确认 unilab 已在本地启动并连接云端 WebSocket
-- [ ] 提醒用户在云端 UI 拖拽上料、确认物料位置
-- [ ] 提醒用户确认配液所需试剂已在 LIMS 完成入库
-- [ ] 等待用户确认物料就绪后再继续
-- [ ] 向用户索要工作流模板 URL → 提取 workflow_uuid
-- [ ] 获取 lab_uuid（API #1）
-- [ ] 获取 project_uuid（API #2）
-- [ ] 获取工作流模板详情（API #3），提取活跃节点 UUID
-- [ ] 解析用户 Excel 文件 → 构建 formulation + 全局参数
-- [ ] 注意参数名映射（模板字段名 → Python 函数参数名）
-- [ ] 提交 notebook（API #4）
-- [ ] 轮询 notebook 状态（API #5）直到完成
-```
-
----
-
-## 真实场景：宜宾产线 Excel 提交提示词模板
-
-> 以下为已验证可用的标准提示词，适用于配液-分液-扣电全流程。
-
-### 场景说明
-
-- unilab 运行在本地 Windows 机器（miniforge 环境），连接云端 WebSocket
-- AI（Cursor / OpenClaw）在任意设备上，通过云端 API 操作，**不需要本地 127.0.0.1**
-- 工作流为 5 节点串联：`create_orders_formulation` → `transfer_3_to_2_to_1_auto` → `func_pack_device_init_auto_start_combined` → `func_sendbottle_allpack_multi` → `transfer_1_to_2`
-
-### 已知固定参数（宜宾产线）
-
-```
-BASE     = https://uni-lab.test.bohrium.com
-lab_uuid = e9ed9102-d709-4741-b7a0-d1e8578e2065
-project  = YiBinElectrolyte (bc5224b4-8120-4765-9961-9dfc1802a1f6)
-workflow = 配液分液formulation全流程 (2bc59938-db79-4415-ac2d-9897ef125f2f)
-```
-
-#### 工作流节点 UUID（固定，无需重新查询）
-
-| 顺序 | action | node_uuid |
-|------|--------|-----------|
-| Step1 | auto-create_orders_formulation | `ece6744a-81ac-4ae4-8cd1-1c8eeda1dab6` |
-| Step2 | auto-transfer_3_to_2_to_1_auto | `1c37a8dd-5ba0-413d-81db-94b9c936a171` |
-| Step3 | auto-func_pack_device_init_auto_start_combined | `97a676a2-d257-4479-9096-073b40300970` |
-| Step4 | auto-func_sendbottle_allpack_multi | `cf69017a-d29c-4aad-a63b-309d63dac2e9` |
-| Step5 | auto-transfer_1_to_2 | `80d1c1aa-dbc3-4601-86b7-5c22a992dd9e` |
-
-### 标准提示词
-
-```
-请使用 yibin-electrolyte-submit skill，提交以下实验：
-
-工作流模板 URL：https://uni-lab.test.bohrium.com/laboratory/e9ed9102-d709-4741-b7a0-d1e8578e2065/workflow/2bc59938-db79-4415-ac2d-9897ef125f2f
-Excel 文件路径：<粘贴或上传 xlsx 路径>
-
-注意事项：
-- lab_uuid、project_uuid、workflow节点UUID均已固定，无需重新查询
-- 直接解析 Excel → 构建 payload → 提交
-- mix_time 传标量整数即可（已兼容）
-- 试剂名以 Excel 为准，注意区分 LiDFOB / LiDOFB 等拼写
-- csv_export_path 取 Excel 中 csv_export_path 列的值
-- 提交后告知 notebook UUID，无需自动轮询（实验耗时较长）
-```
-
-### Excel 列结构说明（experment_template_0415sim-*.xlsx）
-
-| 列范围 | 内容 |
-|--------|------|
-| C | batch_id |
-| D | bottle_type |
-| E-H | coin_cell_volume / conductivity_bottle_count / conductivity_volume / csv_export_path |
-| I-T | 试剂名+质量 交替排列（最多6对）|
-| U | mix_time |
-| V | order_name（每行配方的订单号）|
-| W | pouch_cell_volume |
-| X-Y | target_device / target_location（Step2参数）|
-| AA | material_search_enable（Step3参数）|
-| AB-AS | 扣电站参数（Step4）|
-
-### CSV 导出说明
-
-每次 `create_orders_formulation` 完成后，在 `csv_export_path` 目录下生成：
-```
-electrolyte_orders_<YYYYMMDD_HHMMSS>.csv
-```
-列：`orderCode, orderName, 配液瓶类型, 配液瓶二维码, 分液瓶类型, 分液瓶二维码, 目标配液质量比, 真实配液质量比, 时间`
-
-> **注意**：barCode 为 `null` 或 `"nullBarCode123456"` 是正常现象，表示 LIMS 中该物料尚未扫码。配液瓶缺失通常是因为物料未放在手动传递窗（`locationId` 前缀 `3a19deae-2c7a-`）。

.cursor/skills/yibin-electrolyte-submit/action-index.md

@@ -1,295 +0,0 @@
-# Action 索引
-
-> Action JSON 文件需运行提取命令生成，详见 [SKILL.md](SKILL.md) 中「生成 Action Schema」。
-> 以下描述和参数信息基于源码分析。
-
----
-
-## 配液分液工站 (`bioyond_cell_workstation`)
-
-源码：`unilabos/devices/workstation/bioyond_studio/bioyond_cell/bioyond_cell_workstation.py`
-
-### 调度控制
-
-#### `scheduler_start`
-
-启动 Bioyond LIMS 调度系统
-
-- **核心参数**: 无（仅需 apiKey/requestTime，由设备内部处理）
-- **返回**: LIMS 响应 `{code, message, data}`
-
-#### `scheduler_stop`
-
-停止调度
-
-- **核心参数**: 无
-
-#### `scheduler_continue`
-
-继续调度（从暂停状态恢复）
-
-- **核心参数**: 无
-
-#### `scheduler_reset`
-
-复位调度
-
-- **核心参数**: 无
-
-#### `scheduler_start_and_auto_feeding`
-
-**组合操作**：启动调度 + 自动化上料（4号→3号手套箱）
-
-- **核心参数**: `xlsx_path`（Excel 物料模板路径，可选）
-- **可选参数**: WH4 加样头面 12 个点位（materialName + quantity）、WH4 原液瓶面 9 个点位（materialName + quantity + materialType + targetWH）、WH3 人工堆栈 15 个点位（materialType + materialId + quantity）
-- **流程**: 先 `scheduler_start()`，成功后执行 `auto_feeding4to3()`
-- **备注**: 支持 Excel 模式和手动参数模式，Excel 路径存在时优先使用 Excel
-
-### 物料上料/下料
-
-#### `auto_feeding4to3`
-
-自动化上料：从 4 号手套箱转运物料到 3 号手套箱
-
-- **核心参数**: `xlsx_path`（Excel 物料模板路径）
-- **可选参数**: 同 `scheduler_start_and_auto_feeding` 的 WH4/WH3 点位参数
-- **返回**: 等待上料任务完成后返回结果
-
-#### `auto_batch_outbound_from_xlsx`
-
-自动化下料（从 Excel 读取下料信息）
-
-- **核心参数**: `xlsx_path`（Excel 下料模板）
-- **Excel 列**: locationId, warehouseId, 数量, x, y, z
-
-### 物料管理
-
-#### `create_and_inbound_materials`
-
-批量创建固体物料并入库
-
-- **核心参数**: `material_names`（物料名称列表，默认 `["LiPF6", "LiDFOB", "DTD", "LiFSI", "LiPO2F2"]`）
-- **可选参数**: `type_id`（物料类型ID）, `warehouse_name`（目标仓库，默认 "粉末加样头堆栈"）
-- **流程**: 创建物料 → 批量入库 → 同步
-
-#### `create_material`
-
-创建单个物料并可选入库
-
-- **核心参数**: `material_name`, `type_id`, `warehouse_name`
-- **可选参数**: `location_name_or_id`（库位编号如 "A01" 或 UUID）
-
-#### `create_sample`
-
-创建配液板物料（含子瓶）并入库
-
-- **核心参数**: `name`, `board_type`（如 "5ml分液瓶板"）, `bottle_type`（如 "5ml分液瓶"）, `location_code`（如 "A01"）
-- **可选参数**: `warehouse_name`（默认 "手动堆栈"）
-- **备注**: 自动创建 2x4=8 个子瓶
-
-#### `storage_inbound`
-
-单个物料入库
-
-- **核心参数**: `material_id`, `location_id`
-
-#### `storage_batch_inbound`
-
-批量物料入库
-
-- **核心参数**: `items`（`[{materialId, locationId}, ...]`）
-
-### 配液实验
-
-#### `create_orders`
-
-从 Excel 文件创建配液实验订单
-
-- **核心参数**: `xlsx_path`（Excel 文件路径）
-- **Excel 列**: 配方ID, 创建日期, 配液瓶类型, 混匀时间(s), 扣电组装分液体积, 软包组装分液体积, 电导测试分液体积, 电导测试分液瓶数, 以及所有以 `(g)` 结尾的物料列
-- **流程**: 解析 Excel → 提交订单 → 等待全部完成 → 计算质量比 → 提取分液瓶板 → 创建资源树对象
-- **返回**: `{status, total_orders, bottle_count, reports, mass_ratios, vial_plates}`
-
-#### `create_orders_formulation`
-
-从配方列表创建配液实验订单（前端/API 输入版本）
-
-- **核心参数**: `formulation`（配方数组）
-- **可选参数**: `batch_id`, `bottle_type`（默认 "配液小瓶"）, `mix_time`（秒，列表）, `coin_cell_volume`, `pouch_cell_volume`, `conductivity_volume`, `conductivity_bottle_count`
-- **formulation 格式**:
-  ```json
-  [
-    {
-      "order_name": "配方A",
-      "materials": [
-        {"name": "LiPF6", "mass": 12.5},
-        {"name": "EC", "mass": 50.0},
-        {"name": "DMC", "mass": 37.5}
-      ]
-    }
-  ]
-  ```
-- **返回**: 同 `create_orders`
-
-### 物料转运
-
-#### `transfer_3_to_2_to_1_auto`
-
-**自动转运**：从 create_orders 结果中自动定位分液瓶板并转运到目标设备
-
-- **核心参数**: `vial_plates`（分液瓶板列表，来自 create_orders 返回的 `vial_plates`）
-- **可选参数**: `target_device`（默认 "BatteryStation"）, `target_location`（默认 "bottle_rack_6x2"）, `mass_ratios`（配方信息）
-- **流程**: 遍历瓶板 → 解析 locationId → 调用 LIMS 转运 API → 更新资源树
-- **返回**: `{total, success, failed, results}`
-
-#### `transfer_3_to_2_to_1`
-
-3→2→1 物料转运（手动指定坐标）
-
-- **核心参数**: `source_wh_id`, `source_x`, `source_y`, `source_z`
-
-#### `transfer_3_to_2`
-
-3→2 物料转运
-
-- **核心参数**: `source_wh_id`, `source_x`, `source_y`, `source_z`
-
-#### `transfer_1_to_2`
-
-1→2 物料转运
-
-- **核心参数**: 无
-
-### 查询
-
-#### `order_list_v2`
-
-批量查询实验报告
-
-- **可选参数**: `timeType`, `beginTime`, `endTime`, `status`（60=运行中, 80=完成, 90=失败）, `filter`, `skipCount`, `pageCount`, `sorting`
-
----
-
-## 扣电组装站 (`BatteryStation`)
-
-源码：`unilabos/devices/workstation/coin_cell_assembly/coin_cell_assembly.py`
-
-### 设备控制（组合操作）
-
-#### `func_pack_device_init_auto_start_combined`
-
-**组合操作**：设备初始化 → 物料搜寻确认 → 切换自动模式 → 启动
-
-- **核心参数**: `material_search_enable`（是否启用物料搜寻，默认 `False`）
-- **前置检查**: REG_UNILAB_INTERACT=False, COIL_GB_L_IGNORE_CMD=False, 所有握手寄存器无残留
-- **流程**: 手动模式 → 初始化命令 → 监测物料搜寻弹窗并自动处理 → 自动模式 → 启动
-- **返回**: `True`/`False`
-- **备注**: 第一次运行必须调用此函数；后续批次调用 `func_sendbottle_allpack_multi`
-
-### 批量组装
-
-#### `func_sendbottle_allpack_multi`
-
-**发送瓶数 + 批量组装**（适用于第二批次及后续批次）
-
-- **核心参数**: `elec_num`（电解液瓶数）, `elec_use_num`（每瓶组装电池数）, `elec_vol`（电解液吸液量 μL，默认 50）
-- **可选参数**:
-  - 双滴模式：`dual_drop_mode`(bool), `dual_drop_first_volume`(μL), `dual_drop_suction_timing`(bool), `dual_drop_start_timing`(bool)
-  - 组装参数：`assembly_type`(7=不用铝箔垫/8=用), `assembly_pressure`(N，默认 4200)
-  - 物料参数：`fujipian_panshu`, `fujipian_juzhendianwei`, `gemopanshu`, `gemo_juzhendianwei`, `qiangtou_juzhendianwei`
-  - 开关：`lvbodian`(铝箔垫片), `battery_pressure_mode`(压力模式), `battery_clean_ignore`(忽略清洁)
-  - 其他：`file_path`(CSV保存路径), `formulations`(配方信息，用于CSV追溯)
-- **流程**: 发送瓶数触发物料搬运 → 设置PLC参数 → 循环（等待PLC请求→下发参数→读取电池数据→写入CSV→更新资源树）→ 完成握手
-- **返回**: `{success, total_batteries, batteries, summary}`
-- **备注**: 设备已初始化后直接调用；`formulations` 来自 create_orders 的 `mass_ratios`
-
-#### `func_allpack_cmd`
-
-全套组装（基础版本，含断点续传）
-
-- **核心参数**: `elec_num`, `elec_use_num`, `elec_vol`, `assembly_type`, `assembly_pressure`, `file_path`
-- **返回**: `{success, total_batteries, batteries, summary}`
-
-#### `func_allpack_cmd_simp`
-
-增强版组装（含双滴模式 + 负极片/隔膜/枪头参数）
-
-- **核心参数**: 同 `func_sendbottle_allpack_multi`
-- **备注**: 被 `func_sendbottle_allpack_multi` 内部调用
-
-### 设备控制（单步操作）
-
-#### `func_pack_device_init`
-
-设备初始化（手动模式 → 初始化 → 复位标志）
-
-#### `func_pack_device_auto`
-
-切换自动模式
-
-#### `func_pack_device_start`
-
-启动设备
-
-#### `func_pack_device_stop`
-
-设备停止
-
-#### `func_pack_send_bottle_num`
-
-发送电解液瓶数（触发物料搬运）
-
-- **核心参数**: `bottle_num`（瓶数）
-
-### PLC 参数设置
-
-#### `qiming_coin_cell_code`
-
-设置组装物料参数
-
-- **核心参数**: `fujipian_panshu`（负极片盘数）
-- **可选参数**: `fujipian_juzhendianwei`, `gemopanshu`, `gemo_juzhendianwei`, `lvbodian`, `battery_pressure_mode`, `battery_pressure`, `battery_clean_ignore`
-
-### 数据采集
-
-#### `func_read_data_and_output`
-
-持续数据采集并导出 CSV（后台循环运行）
-
-- **核心参数**: `file_path`（CSV 保存目录）
-- **采集字段**: 开路电压, 极片质量, 组装时间, 压制力, 电解液加注量, 电池类型, 电解液二维码, 电池二维码
-
-#### `func_stop_read_data`
-
-停止 CSV 数据采集
-
-### 设备状态属性（只读）
-
-| 属性 | 类型 | 说明 |
-|------|------|------|
-| `sys_status` | str | 设备状态（启动中/停止中/复位中/初始化中） |
-| `sys_mode` | str | 设备模式（手动/自动） |
-| `data_assembly_coin_cell_num` | int | 已完成电池数量 |
-| `data_assembly_time` | float | 单颗电池组装时间(秒) |
-| `data_open_circuit_voltage` | float | 开路电压(V) |
-| `data_pole_weight` | float | 正极片称重(g) |
-| `data_glove_box_pressure` | float | 手套箱压力(mbar) |
-| `data_glove_box_o2_content` | float | 手套箱氧含量(ppm) |
-| `data_glove_box_water_content` | float | 手套箱水含量(ppm) |
-| `data_coin_cell_code` | str | 电池二维码 |
-| `data_electrolyte_code` | str | 电解液二维码 |
-
----
-
-## 配置参考
-
-设备图文件 `yibin_electrolyte_config.json` 中的仓库映射（`warehouse_mapping`）：
-
-| 仓库名称 | 说明 | 典型操作 |
-|---------|------|---------|
-| 粉末加样头堆栈 | 20 个点位 (A01-T01) | `create_and_inbound_materials` 入库目标 |
-| 配液站内试剂仓库 | 9 个点位 (A01-C03) | 试剂存储 |
-| 自动堆栈-左 | 4 个点位 | 分液瓶板存放，`transfer_3_to_2_to_1_auto` 的源位置 |
-| 自动堆栈-右 | 4 个点位 | 分液瓶板存放 |
-| 手动传递窗左/右 | 各 15 个点位 | 人工上料/下料 |
-| 4号手套箱内部堆栈 | 12 个点位 | `auto_feeding4to3` 的源位置 |

.gitignore

@@ -251,7 +251,4 @@ ros-humble-unilabos-msgs-0.9.13-h6403a04_5.tar.bz2
 *.bz2
 test_config.py
 
-# Local config files with secrets
-yibin_coin_cell_only_config.json
-yibin_electrolyte_config.json
-yibin_electrolyte_only_config.json
+

260415csv_export_walkthrough.md

@@ -1,72 +0,0 @@
-# CSV 导出功能变更概要
-
-## 修改的文件
-
-### 1. [bioyond_cell_workstation.py](file:///d:/UniLabdev/Uni-Lab-OS/unilabos/devices/workstation/bioyond_studio/bioyond_cell/bioyond_cell_workstation.py)
-
-#### 新增导入
-- `import csv` 和 `import os`（L14-15）
-
-#### 新增方法
-
-| 方法 | 功能 |
-|------|------|
-| `_extract_prep_bottle_from_report` | 从 order_finish 报文提取**配液瓶**信息（每订单最多1个） |
-| `_extract_vial_bottles_from_report` | 从 order_finish 报文提取**分液瓶**信息（每订单可多个，返回数组） |
-| `_export_order_csv` | 汇总所有信息写入 CSV 文件 |
-
-#### 配液瓶筛选逻辑 (`_extract_prep_bottle_from_report`)
-- `typemode="1"`, `realQuantity=1`, `usedQuantity=1`
-- `locationId` 以 `3a19deae-2c7a-` 开头（手动传递窗）
-- LIMS API 二次确认：`typeName` 含"配液瓶(小)"或"配液瓶(大)"
-
-#### 分液瓶筛选逻辑 (`_extract_vial_bottles_from_report`)
-- `typemode="1"`, `realQuantity=1`, `usedQuantity=1`
-- `locationId` 以 `3a19debc-84b5-` 或 `3a19debe-5200` 开头（自动堆栈-左/右）
-- LIMS API 二次确认：`typeName` 为"5ml分液瓶"或"20ml分液瓶"
-- **返回数组**，支持 1×5ml + n×20ml 的组合
-
-#### 修改的方法
-
-| 方法 | 变更 |
-|------|------|
-| `_submit_and_wait_orders` | 新增配液瓶+分液瓶提取步骤，将 `prep_bottles` 和 `vial_bottles` 存入 `final_result` |
-| `create_orders` | 添加 `csv_export_path` 参数，末尾调用 `_export_order_csv` |
-| `create_orders_formulation` | 添加 `csv_export_path` 参数，末尾调用 `_export_order_csv` |
-
-#### CSV 输出格式
-```
-orderCode, orderName, 配液瓶类型, 配液瓶二维码, 分液瓶类型, 分液瓶二维码, 目标配液质量比, 真实配液质量比, 时间
-```
-- 单个分液瓶时直接写值；多个分液瓶时类型和二维码用 JSON 数组表示
-- CSV 编码使用 `utf-8-sig`（兼容 Excel 打开）
-- `csv_export_path` 默认为空字符串，不传则不导出（向后兼容）
-
----
-
-### 2. [bioyond_cell.yaml](file:///d:/UniLabdev/Uni-Lab-OS/unilabos/registry/devices/bioyond_cell.yaml)
-
-为两个 action 注册了 `csv_export_path` 参数：
-
-- `auto-create_orders`: `goal_default` + `schema.properties.goal.properties` 中添加 `csv_export_path`
-- `auto-create_orders_formulation`: 同上
-
----
-
-### 3. [coin_cell_assembly.py](file:///d:/UniLabdev/Uni-Lab-OS/unilabos/devices/workstation/coin_cell_assembly/coin_cell_assembly.py) 的 CSV 改动与全流程追溯
-
-在 `bioyond_cell_workstation.py` 的 `_submit_and_wait_orders` 最后阶段，提取 `prep_bottles`（配液瓶）和 `vial_bottles`（分液瓶）的条码并随 `mass_ratios` 数组一起下发给各下游工站（例如扣电组装站），实现跨站的全流程配方追溯。
-
-并在扣电站生成的 `date_xxx.csv` 中，**替换并新增**了以下列：
-- 移除了原有的 `formulation_order_code` 与合并的 `formulation_ratio` 列。
-- 新增 `orderName` 导出
-- 新增 `prep_bottle_barcode`（奔曜传递的配液瓶二维码）
-- 新增 `vial_bottle_barcodes`（奔曜传递的分液瓶二维码，多瓶时存 JSON 数组）
-- 新增 `target_mass_ratio` 理论目标质量比
-- 新增 `real_mass_ratio` 实际称量真实质量比
-
-*注意：这与操作人员在手套箱内扫码传入扣电站的 `electrolyte_code` 是单独记录的，方便做数据核对。*
-
-## 向后兼容性
-- `csv_export_path` 默认值为 `""`（空字符串），现有调用不受影响
-- 新增的 `prep_bottles` 和 `vial_bottles` 字段为 `final_result` 和 `mass_ratios` 内部的新增附属字段，不破坏现有数据结构。

CHANGES_2026_03_24.md

@@ -1,168 +0,0 @@
-# 变更说明 2026-03-24
-
-## 问题背景
-
-`BioyondElectrolyteDeck`（原 `BIOYOND_YB_Deck`）迁移后，前端物料未能正常上传/同步。
-
----
-
-## 修复内容
-
-### 1. `unilabos/resources/bioyond/decks.py`
-
-- 补回 `setup: bool = False` 参数及 `if setup: self.setup()` 逻辑，与旧版 `BIOYOND_YB_Deck` 保持一致
-- 工厂函数 `bioyond_electrolyte_deck` 保留显式调用 `deck.setup()`，避免重复初始化
-
-```python
-# 修复前（缺少 setup 参数，无法通过 setup=True 触发初始化）
-def __init__(self, name, size_x, size_y, size_z, category):
-    super().__init__(...)
-
-# 修复后
-def __init__(self, name, size_x, size_y, size_z, category, setup: bool = False):
-    super().__init__(...)
-    if setup:
-        self.setup()
-```
-
----
-
-### 2. `unilabos/resources/graphio.py`
-
-- 修复 `resource_bioyond_to_plr` 中两处 `bottle.tracker.liquids` 直接赋值导致的崩溃
-- `ResourceHolder`（如枪头盒的 TipSpot 槽位）没有 `tracker` 属性，直接访问会抛出 `AttributeError`，阻断整个 Bioyond 同步流程
-
-```python
-# 修复前
-bottle.tracker.liquids = [...]
-
-# 修复后
-if hasattr(bottle, 'tracker') and bottle.tracker is not None:
-    bottle.tracker.liquids = [...]
-```
-
----
-
-### 3. `unilabos/app/main.py`
-
-- 保留 `file_path is not None` 条件不变（已还原），并补充注释说明原因
-- 该逻辑只在**本地文件模式**下有意义：本地 graph 文件只含设备结构，远端有已保存物料，merge 才能将两者合并
-- 远端模式（`file_path=None`）下，`resource_tree_set` 和 `request_startup_json` 来自同一份数据，merge 为空操作，条件是否加 `file_path is not None` 对结果没有影响
-
----
-
-### 4. `unilabos/devices/workstation/bioyond_studio/station.py` ⭐ 核心修复
-
-- 当 deck 通过反序列化创建时，不会自动调用 `setup()`，导致 `deck.children` 为空，`warehouses` 始终是 `{}`
-- 增加兜底逻辑：仓库扫描后仍为空，则主动调用 `deck.setup()` 初始化仓库
-- 这是导致所有物料放置失败（`warehouse '...' 在deck中不存在。可用warehouses: []`）的根本原因
-
-```python
-# 新增兜底
-if not self.deck.warehouses and hasattr(self.deck, "setup") and callable(self.deck.setup):
-    logger.info("Deck 无仓库子节点，调用 setup() 初始化仓库")
-    self.deck.setup()
-```
-
----
-
----
-
-## 补充修复 2026-03-25：依华扣电组装工站子物料未上传
-
-### 问题
-
-`CoinCellAssemblyWorkstation.post_init` 直接上传空 deck，未调用 `deck.setup()`，导致：
-- 前端子物料（成品弹夹、料盘、瓶架等）不显示
-- 运行时 `self.deck.get_resource("成品弹夹")` 抛出 `ResourceNotFoundError`
-
-### 修复文件
-
-**`unilabos/devices/workstation/coin_cell_assembly/YB_YH_materials.py`**
-- `YihuaCoinCellDeck.__init__` 补回 `setup: bool = False` 参数及 `if setup: self.setup()` 逻辑
-
-**`unilabos/devices/workstation/coin_cell_assembly/coin_cell_assembly.py`**
-- `post_init` 中增加与 Bioyond 工站相同的兜底逻辑：deck 无子节点时调用 `deck.setup()` 初始化
-
-```python
-# post_init 中新增
-if self.deck and not self.deck.children and hasattr(self.deck, "setup") and callable(self.deck.setup):
-    logger.info("YihuaCoinCellDeck 无子节点，调用 setup() 初始化")
-    self.deck.setup()
-```
-
-### 联动 Bug：`MaterialPlate.create_with_holes` 构造顺序错误
-
-**现象**：`deck.setup()` 被调用后，启动时抛出：
-```
-设备后初始化失败: Must specify either `ordered_items` or `ordering`.
-```
-
-**根因**：`create_with_holes` 原来的逻辑是先构造空的 `MaterialPlate` 实例，再 assign 洞位：
-```python
-# 旧（错误）：cls(...) 时 ordered_items=None → ItemizedResource.__init__ 立即报错
-plate = cls(name=name, ...)          # ← 这里就崩了
-holes = create_ordered_items_2d(...) # ← 根本没走到这里
-for hole_name, hole in holes.items():
-    plate.assign_child_resource(...)
-```
-pylabrobot 的 `ItemizedResource.__init__` 强制要求 `ordered_items` 和 `ordering` 必须有一个不为 `None`，空构造直接失败。
-
-**修复**：先建洞位，再作为 `ordered_items` 传给构造函数：
-```python
-# 新（正确）：先建洞位，再一次性传入构造函数
-holes = create_ordered_items_2d(klass=MaterialHole, num_items_x=4, ...)
-return cls(name=name, ..., ordered_items=holes)
-```
-
-> 此 bug 此前未被触发，是因为 `deck.setup()` 从未被调用到——正是上面 `post_init` 兜底修复引出的联动问题。
-
----
-
-## 补充修复 2026-03-25：3→2→1 转运资源同步失败
-
-### 问题
-
-配液工站（Bioyond）完成分液后，调用 `transfer_3_to_2_to_1_auto` 将分液瓶板转运到扣电工站（BatteryStation）。物理 LIMS 转运成功，但数字孪生资源树同步始终失败：
-```
-[资源同步] ❌ 失败: 目标设备 'BatteryStation' 中未找到资源 'bottle_rack_6x2'
-```
-
-### 根因
-
-`_get_resource_from_device` 方法负责跨设备查找资源对象，有两个问题：
-
-1. **原始路径完全失效**：尝试 `from unilabos.app.ros2_app import get_device_plr_resource_by_name`，但该模块不存在，`ImportError` 被 `except Exception: pass` 静默吞掉
-2. **降级路径搜错地方**：遍历 `self._plr_resources`（Bioyond 自己的资源），不可能找到 BatteryStation 的 `bottle_rack_6x2`
-
-### 修复文件
-
-**`unilabos/devices/workstation/bioyond_studio/bioyond_cell/bioyond_cell_workstation.py`**
-
-改用全局设备注册表 `registered_devices` 跨设备访问目标 deck：
-
-```python
-# 修复前（失效）
-from unilabos.app.ros2_app import get_device_plr_resource_by_name  # 模块不存在
-return get_device_plr_resource_by_name(device_id, resource_name)
-
-# 修复后
-from unilabos.ros.nodes.base_device_node import registered_devices
-device_info = registered_devices.get(device_id)
-if device_info is not None:
-    driver = device_info.get("driver_instance")  # TypedDict 是 dict，必须用 .get()
-    if driver is not None:
-        deck = getattr(driver, "deck", None)
-        if deck is not None:
-            res = deck.get_resource(resource_name)
-```
-
-关键细节：`DeviceInfoType` 是 `TypedDict`（即普通 `dict`），必须用 `device_info.get("driver_instance")` 而非 `getattr(device_info, "driver_instance", None)`——后者对字典永远返回 `None`。
-
----
-
-## 根本原因分析
-
-旧版以**本地文件模式**启动（有 `graph` 文件），deck 在启动前已通过 `merge_remote_resources` 获得仓库子节点，反序列化时能正确恢复 warehouses。
-
-新版以**远端模式**启动（`file_path=None`），deck 反序列化时没有仓库子节点，`station.py` 扫描为空，所有物料的 warehouse 匹配失败，Bioyond 同步的 16 个资源全部无法放置到对应仓库位，前端不显示。

docs/advanced_usage/configuration.md

@@ -12,7 +12,7 @@ Uni-Lab 使用 Python 格式的配置文件（`.py`），默认为 `unilabos_dat
 
 **获取方式：**
 
-进入 [Uni-Lab 实验室](https://leap-lab.bohrium.com)，点击左下角的头像，在实验室详情中获取所在实验室的 ak 和 sk：
+进入 [Uni-Lab 实验室](https://uni-lab.bohrium.com)，点击左下角的头像，在实验室详情中获取所在实验室的 ak 和 sk：
 
 ![copy_aksk.gif](image/copy_aksk.gif)
 
@@ -69,7 +69,7 @@ class WSConfig:
 
 # HTTP配置
 class HTTPConfig:
-    remote_addr = "https://leap-lab.bohrium.com/api/v1"  # 远程服务器地址
+    remote_addr = "https://uni-lab.bohrium.com/api/v1"  # 远程服务器地址
 
 # ROS配置
 class ROSConfig:
@@ -209,8 +209,8 @@ unilab --ak "key" --sk "secret" --addr "test" --upload_registry --2d_vis -g grap
 
 `--addr` 参数支持以下预设值，会自动转换为对应的完整 URL：
 
-- `test` → `https://leap-lab.test.bohrium.com/api/v1`
-- `uat` → `https://leap-lab.uat.bohrium.com/api/v1`
+- `test` → `https://uni-lab.test.bohrium.com/api/v1`
+- `uat` → `https://uni-lab.uat.bohrium.com/api/v1`
 - `local` → `http://127.0.0.1:48197/api/v1`
 - 其他值 → 直接使用作为完整 URL
 
@@ -248,7 +248,7 @@ unilab --ak "key" --sk "secret" --addr "test" --upload_registry --2d_vis -g grap
 
 `ak` 和 `sk` 是必需的认证参数：
 
-1. **获取方式**：在 [Uni-Lab 官网](https://leap-lab.bohrium.com) 注册实验室后获得
+1. **获取方式**：在 [Uni-Lab 官网](https://uni-lab.bohrium.com) 注册实验室后获得
 2. **配置方式**：
    - **命令行参数**：`--ak "your_key" --sk "your_secret"`（最高优先级，推荐）
    - **环境变量**：`UNILABOS_BASICCONFIG_AK` 和 `UNILABOS_BASICCONFIG_SK`
@@ -275,15 +275,15 @@ WebSocket 是 Uni-Lab 的主要通信方式：
 
 HTTP 客户端配置用于与云端服务通信：
 
-| 参数          | 类型 | 默认值                                  | 说明         |
-| ------------- | ---- | --------------------------------------- | ------------ |
-| `remote_addr` | str  | `"https://leap-lab.bohrium.com/api/v1"` | 远程服务地址 |
+| 参数          | 类型 | 默认值                                 | 说明         |
+| ------------- | ---- | -------------------------------------- | ------------ |
+| `remote_addr` | str  | `"https://uni-lab.bohrium.com/api/v1"` | 远程服务地址 |
 
 **预设环境地址**：
 
-- 生产环境：`https://leap-lab.bohrium.com/api/v1`（默认）
-- 测试环境：`https://leap-lab.test.bohrium.com/api/v1`
-- UAT 环境：`https://leap-lab.uat.bohrium.com/api/v1`
+- 生产环境：`https://uni-lab.bohrium.com/api/v1`（默认）
+- 测试环境：`https://uni-lab.test.bohrium.com/api/v1`
+- UAT 环境：`https://uni-lab.uat.bohrium.com/api/v1`
 - 本地环境：`http://127.0.0.1:48197/api/v1`
 
 ### 4. ROSConfig - ROS 配置
@@ -401,7 +401,7 @@ export UNILABOS_WSCONFIG_RECONNECT_INTERVAL="10"
 export UNILABOS_WSCONFIG_MAX_RECONNECT_ATTEMPTS="500"
 
 # 设置HTTP配置
-export UNILABOS_HTTPCONFIG_REMOTE_ADDR="https://leap-lab.test.bohrium.com/api/v1"
+export UNILABOS_HTTPCONFIG_REMOTE_ADDR="https://uni-lab.test.bohrium.com/api/v1"
 ```
 
 ## 配置文件使用方法
@@ -484,13 +484,13 @@ export UNILABOS_WSCONFIG_MAX_RECONNECT_ATTEMPTS=100
 
 ```python
 class HTTPConfig:
-    remote_addr = "https://leap-lab.test.bohrium.com/api/v1"
+    remote_addr = "https://uni-lab.test.bohrium.com/api/v1"
 ```
 
 **环境变量方式：**
 
 ```bash
-export UNILABOS_HTTPCONFIG_REMOTE_ADDR=https://leap-lab.test.bohrium.com/api/v1
+export UNILABOS_HTTPCONFIG_REMOTE_ADDR=https://uni-lab.test.bohrium.com/api/v1
 ```
 
 **命令行方式（推荐）：**

docs/developer_guide/networking_overview.md

@@ -23,7 +23,7 @@ Uni-Lab-OS 支持多种部署模式：
 ```
 ┌──────────────────────────────────────────────┐
 │      Cloud Platform/Self-hosted Platform     │
-│           leap-lab.bohrium.com                │
+│           uni-lab.bohrium.com                │
 │  (Resource Management, Task Scheduling,      │
 │              Monitoring)                     │
 └────────────────────┬─────────────────────────┘
@@ -444,7 +444,7 @@ ros2 daemon stop && ros2 daemon start
 
 ```bash
 # 测试云端连接
-curl https://leap-lab.bohrium.com/api/v1/health
+curl https://uni-lab.bohrium.com/api/v1/health
 
 # 测试WebSocket
 # 启动Uni-Lab后查看日志

docs/user_guide/best_practice.md

@@ -33,11 +33,11 @@
 
 **选择合适的安装包：**
 
-| 安装包          | 适用场景                     | 包含组件                                      |
-| --------------- | ---------------------------- | --------------------------------------------- |
-| `unilabos`      | **推荐大多数用户**，生产部署 | 完整安装包，开箱即用                          |
-| `unilabos-env`  | 开发者（可编辑安装）         | 仅环境依赖，通过 pip 安装 unilabos            |
-| `unilabos-full` | 仿真/可视化                  | unilabos + 完整 ROS2 桌面版 + Gazebo + MoveIt |
+| 安装包 | 适用场景 | 包含组件 |
+|--------|----------|----------|
+| `unilabos` | **推荐大多数用户**，生产部署 | 完整安装包，开箱即用 |
+| `unilabos-env` | 开发者（可编辑安装） | 仅环境依赖，通过 pip 安装 unilabos |
+| `unilabos-full` | 仿真/可视化 | unilabos + 完整 ROS2 桌面版 + Gazebo + MoveIt |
 
 **关键步骤：**
 
@@ -66,7 +66,6 @@ mamba install uni-lab::unilabos-full -c robostack-staging -c conda-forge
 ```
 
 **选择建议：**
-
 - **日常使用/生产部署**：使用 `unilabos`（推荐），完整功能，开箱即用
 - **开发者**：使用 `unilabos-env` + `pip install -e .` + `uv pip install -r unilabos/utils/requirements.txt`，代码修改立即生效
 - **仿真/可视化**：使用 `unilabos-full`，含 Gazebo、rviz2、MoveIt
@@ -89,7 +88,7 @@ python -c "from unilabos_msgs.msg import Resource; print('ROS msgs OK')"
 
 #### 2.1 注册实验室账号
 
-1. 访问 [https://leap-lab.bohrium.com](https://leap-lab.bohrium.com)
+1. 访问 [https://uni-lab.bohrium.com](https://uni-lab.bohrium.com)
 2. 注册账号并登录
 3. 创建新实验室
 
@@ -298,7 +297,7 @@ unilab --ak your_ak --sk your_sk -g test/experiments/mock_devices/mock_all.json
 
 #### 5.2 访问 Web 界面
 
-启动系统后，访问[https://leap-lab.bohrium.com](https://leap-lab.bohrium.com)
+启动系统后，访问[https://uni-lab.bohrium.com](https://uni-lab.bohrium.com)
 
 #### 5.3 添加设备和物料
 
@@ -307,10 +306,12 @@ unilab --ak your_ak --sk your_sk -g test/experiments/mock_devices/mock_all.json
 **示例场景：** 创建一个简单的液体转移实验
 
 1. **添加工作站（必需）：**
+
    - 在"仪器设备"中找到 `work_station`
    - 添加 `workstation` x1
 
 2. **添加虚拟转移泵：**
+
    - 在"仪器设备"中找到 `virtual_device`
    - 添加 `virtual_transfer_pump` x1
 
@@ -817,7 +818,6 @@ uv pip install -r unilabos/utils/requirements.txt
 ```
 
 **为什么使用这种方式？**
-
 - `unilabos-env` 提供 ROS2 核心组件和 uv（通过 conda 安装，避免编译）
 - `unilabos/utils/requirements.txt` 包含所有运行时需要的 pip 依赖
 - `dev_install.py` 自动检测中文环境，中文系统自动使用清华镜像
@@ -1796,27 +1796,32 @@ unilab --ak your_ak --sk your_sk -g graph.json \
 **详细步骤：**
 
 1. **需求分析**：
+
    - 明确实验流程
    - 列出所需设备和物料
    - 设计工作流程图
 
 2. **环境搭建**：
+
    - 安装 Uni-Lab-OS
    - 创建实验室账号
    - 准备开发工具（IDE、Git）
 
 3. **原型验证**：
+
    - 使用虚拟设备测试流程
    - 验证工作流逻辑
    - 调整参数
 
 4. **迭代开发**：
+
    - 实现自定义设备驱动（同时撰写单点函数测试）
    - 编写注册表
    - 单元测试
    - 集成测试
 
 5. **测试部署**：
+
    - 连接真实硬件
    - 空跑测试
    - 小规模试验
@@ -1866,7 +1871,7 @@ unilab --ak your_ak --sk your_sk -g graph.json \
 #### 14.5 社区支持
 
 - **GitHub Issues**：[https://github.com/deepmodeling/Uni-Lab-OS/issues](https://github.com/deepmodeling/Uni-Lab-OS/issues)
-- **官方网站**：[https://leap-lab.bohrium.com](https://leap-lab.bohrium.com)
+- **官方网站**：[https://uni-lab.bohrium.com](https://uni-lab.bohrium.com)
 
 ---
 

docs/user_guide/graph_files.md

@@ -626,7 +626,7 @@ unilab
 
 **云端图文件管理**:
 
-1. 登录 https://leap-lab.bohrium.com
+1. 登录 https://uni-lab.bohrium.com
 2. 进入"设备配置"
 3. 创建或编辑配置
 4. 保存到云端

docs/user_guide/launch.md

@@ -54,6 +54,7 @@ Uni-Lab 的启动过程分为以下几个阶段：
 您可以直接跟随 unilabos 的提示进行，无需查阅本节
 
 - **工作目录设置**：
+
   - 如果当前目录以 `unilabos_data` 结尾，则使用当前目录
   - 否则使用 `当前目录/unilabos_data` 作为工作目录
   - 可通过 `--working_dir` 指定自定义工作目录
@@ -67,8 +68,8 @@ Uni-Lab 的启动过程分为以下几个阶段：
 
 支持多种后端环境：
 
-- `--addr test`：测试环境 (`https://leap-lab.test.bohrium.com/api/v1`)
-- `--addr uat`：UAT 环境 (`https://leap-lab.uat.bohrium.com/api/v1`)
+- `--addr test`：测试环境 (`https://uni-lab.test.bohrium.com/api/v1`)
+- `--addr uat`：UAT 环境 (`https://uni-lab.uat.bohrium.com/api/v1`)
 - `--addr local`：本地环境 (`http://127.0.0.1:48197/api/v1`)
 - 自定义地址：直接指定完整 URL
 
@@ -175,7 +176,7 @@ unilab --config path/to/your/config.py
 
 如果是首次使用，系统会：
 
-1. 提示前往 https://leap-lab.bohrium.com 注册实验室
+1. 提示前往 https://uni-lab.bohrium.com 注册实验室
 2. 引导创建配置文件
 3. 设置工作目录
 
@@ -215,7 +216,7 @@ unilab --ak your_ak --sk your_sk --port 8080 --disable_browser
 
 如果提示 "后续运行必须拥有一个实验室"，请确保：
 
-- 已在 https://leap-lab.bohrium.com 注册实验室
+- 已在 https://uni-lab.bohrium.com 注册实验室
 - 正确设置了 `--ak` 和 `--sk` 参数
 - 配置文件中包含正确的认证信息
 

tests/compile/test_batch_transfer_protocol.py

@@ -0,0 +1,296 @@
+"""
+批量转运编译器测试
+
+覆盖：单物料退化、刚好一批、多批次、空操作、AGV 配置发现、children dict 状态。
+"""
+
+import pytest
+import networkx as nx
+
+from unilabos.compile.batch_transfer_protocol import generate_batch_transfer_protocol
+from unilabos.compile.agv_transfer_protocol import generate_agv_transfer_protocol
+from unilabos.compile._agv_utils import find_agv_config, get_agv_capacity, split_batches
+
+
+# ============ 构建测试用设备图 ============
+
+def _make_graph(capacity_x=2, capacity_y=1, capacity_z=1):
+    """构建包含 AGV 节点的测试设备图"""
+    G = nx.DiGraph()
+
+    # AGV 节点
+    G.add_node("AGV", **{
+        "type": "device",
+        "class_": "agv_transport_station",
+        "config": {
+            "protocol_type": ["AGVTransferProtocol", "BatchTransferProtocol"],
+            "device_roles": {
+                "navigator": "zhixing_agv",
+                "arm": "zhixing_ur_arm"
+            },
+            "route_table": {
+                "StationA->StationB": {
+                    "nav_command": '{"target": "LM1"}',
+                    "arm_pick": '{"task_name": "pick.urp"}',
+                    "arm_place": '{"task_name": "place.urp"}'
+                },
+                "AGV->StationA": {
+                    "nav_command": '{"target": "LM1"}',
+                    "arm_pick": '{"task_name": "pick.urp"}',
+                    "arm_place": '{"task_name": "place.urp"}'
+                },
+                "StationA->StationA": {
+                    "nav_command": '{"target": "LM1"}',
+                    "arm_pick": '{"task_name": "pick.urp"}',
+                    "arm_place": '{"task_name": "place.urp"}'
+                },
+            }
+        }
+    })
+
+    # AGV 子设备
+    G.add_node("zhixing_agv", type="device", class_="zhixing_agv")
+    G.add_node("zhixing_ur_arm", type="device", class_="zhixing_ur_arm")
+    G.add_edge("AGV", "zhixing_agv")
+    G.add_edge("AGV", "zhixing_ur_arm")
+
+    # AGV Warehouse 子资源
+    G.add_node("agv_platform", **{
+        "type": "warehouse",
+        "config": {
+            "name": "agv_platform",
+            "num_items_x": capacity_x,
+            "num_items_y": capacity_y,
+            "num_items_z": capacity_z,
+        }
+    })
+    G.add_edge("AGV", "agv_platform")
+
+    # 来源/目标工站
+    G.add_node("StationA", type="device", class_="workstation")
+    G.add_node("StationB", type="device", class_="workstation")
+
+    return G
+
+
+def _make_repos(items_count=2):
+    """构建测试用的 from_repo 和 to_repo dict"""
+    children = {}
+    for i in range(items_count):
+        pos = f"A{i + 1:02d}"
+        children[pos] = {
+            "id": f"resource_{i + 1}",
+            "name": f"R{i + 1}",
+            "parent": "StationA",
+            "type": "resource",
+        }
+
+    from_repo = {
+        "StationA": {
+            "id": "StationA",
+            "name": "StationA",
+            "children": children,
+        }
+    }
+    to_repo = {
+        "StationB": {
+            "id": "StationB",
+            "name": "StationB",
+            "children": {},
+        }
+    }
+    return from_repo, to_repo
+
+
+def _make_items(count=2):
+    """构建 transfer_resources / from_positions / to_positions"""
+    resources = [
+        {
+            "id": f"resource_{i + 1}",
+            "name": f"R{i + 1}",
+            "sample_id": f"uuid-{i + 1}",
+            "parent": "StationA",
+            "type": "resource",
+        }
+        for i in range(count)
+    ]
+    from_positions = [f"A{i + 1:02d}" for i in range(count)]
+    to_positions = [f"A{i + 1:02d}" for i in range(count)]
+    return resources, from_positions, to_positions
+
+
+# ============ _agv_utils 测试 ============
+
+class TestAGVUtils:
+    def test_find_agv_config(self):
+        G = _make_graph()
+        cfg = find_agv_config(G)
+        assert cfg["agv_id"] == "AGV"
+        assert cfg["device_roles"]["navigator"] == "zhixing_agv"
+        assert cfg["device_roles"]["arm"] == "zhixing_ur_arm"
+        assert "StationA->StationB" in cfg["route_table"]
+
+    def test_find_agv_config_by_id(self):
+        G = _make_graph()
+        cfg = find_agv_config(G, agv_id="AGV")
+        assert cfg["agv_id"] == "AGV"
+
+    def test_find_agv_config_not_found(self):
+        G = nx.DiGraph()
+        G.add_node("SomeDevice", type="device", class_="pump")
+        with pytest.raises(ValueError, match="未找到 AGV"):
+            find_agv_config(G)
+
+    def test_get_agv_capacity(self):
+        G = _make_graph(capacity_x=2, capacity_y=1, capacity_z=1)
+        assert get_agv_capacity(G, "AGV") == 2
+
+    def test_get_agv_capacity_multi_layer(self):
+        G = _make_graph(capacity_x=1, capacity_y=2, capacity_z=3)
+        assert get_agv_capacity(G, "AGV") == 6
+
+    def test_split_batches_exact(self):
+        assert split_batches([1, 2], 2) == [[1, 2]]
+
+    def test_split_batches_overflow(self):
+        assert split_batches([1, 2, 3], 2) == [[1, 2], [3]]
+
+    def test_split_batches_single(self):
+        assert split_batches([1], 4) == [[1]]
+
+    def test_split_batches_zero_capacity(self):
+        with pytest.raises(ValueError):
+            split_batches([1], 0)
+
+
+# ============ 批量转运编译器测试 ============
+
+class TestBatchTransferProtocol:
+    def test_empty_items(self):
+        """空物料列表返回空 steps"""
+        G = _make_graph()
+        from_repo, to_repo = _make_repos(0)
+        steps = generate_batch_transfer_protocol(G, from_repo, to_repo, [], [], [])
+        assert steps == []
+
+    def test_single_item(self):
+        """单物料转运（BatchTransfer 退化为单物料）"""
+        G = _make_graph(capacity_x=2)
+        from_repo, to_repo = _make_repos(1)
+        resources, from_pos, to_pos = _make_items(1)
+        steps = generate_batch_transfer_protocol(G, from_repo, to_repo, resources, from_pos, to_pos)
+
+        # 应该有: nav到来源 + 1个pick + nav到目标 + 1个place = 4 steps
+        assert len(steps) == 4
+        assert steps[0]["action_name"] == "send_nav_task"
+        assert steps[1]["action_name"] == "move_pos_task"
+        assert steps[1]["_transfer_meta"]["phase"] == "pick"
+        assert steps[2]["action_name"] == "send_nav_task"
+        assert steps[3]["action_name"] == "move_pos_task"
+        assert steps[3]["_transfer_meta"]["phase"] == "place"
+
+    def test_exact_capacity(self):
+        """物料数 = AGV 容量，刚好一批"""
+        G = _make_graph(capacity_x=2)
+        from_repo, to_repo = _make_repos(2)
+        resources, from_pos, to_pos = _make_items(2)
+        steps = generate_batch_transfer_protocol(G, from_repo, to_repo, resources, from_pos, to_pos)
+
+        # nav + 2 pick + nav + 2 place = 6 steps
+        assert len(steps) == 6
+        pick_steps = [s for s in steps if s.get("_transfer_meta", {}).get("phase") == "pick"]
+        place_steps = [s for s in steps if s.get("_transfer_meta", {}).get("phase") == "place"]
+        assert len(pick_steps) == 2
+        assert len(place_steps) == 2
+
+    def test_multi_batch(self):
+        """物料数 > AGV 容量，自动分批"""
+        G = _make_graph(capacity_x=2)
+        from_repo, to_repo = _make_repos(3)
+        resources, from_pos, to_pos = _make_items(3)
+        steps = generate_batch_transfer_protocol(G, from_repo, to_repo, resources, from_pos, to_pos)
+
+        # 批次1: nav + 2 pick + nav + 2 place + nav(返回) = 7
+        # 批次2: nav + 1 pick + nav + 1 place = 4
+        # 总计 11 steps
+        assert len(steps) == 11
+
+        nav_steps = [s for s in steps if s["action_name"] == "send_nav_task"]
+        # 批次1: 2 nav(去来源+去目标) + 1 nav(返回) + 批次2: 2 nav = 5 nav
+        assert len(nav_steps) == 5
+
+    def test_children_dict_updated(self):
+        """compile 阶段三方 children dict 状态正确"""
+        G = _make_graph(capacity_x=2)
+        from_repo, to_repo = _make_repos(2)
+        resources, from_pos, to_pos = _make_items(2)
+
+        assert "A01" in from_repo["StationA"]["children"]
+        assert "A02" in from_repo["StationA"]["children"]
+        assert len(to_repo["StationB"]["children"]) == 0
+
+        generate_batch_transfer_protocol(G, from_repo, to_repo, resources, from_pos, to_pos)
+
+        # compile 后 from_repo 的 children 应该被 pop 掉
+        assert "A01" not in from_repo["StationA"]["children"]
+        assert "A02" not in from_repo["StationA"]["children"]
+        # to_repo 应该有新物料
+        assert "A01" in to_repo["StationB"]["children"]
+        assert "A02" in to_repo["StationB"]["children"]
+        assert to_repo["StationB"]["children"]["A01"]["id"] == "resource_1"
+
+    def test_device_ids_from_config(self):
+        """设备 ID 全部从配置读取，不硬编码"""
+        G = _make_graph()
+        from_repo, to_repo = _make_repos(1)
+        resources, from_pos, to_pos = _make_items(1)
+        steps = generate_batch_transfer_protocol(G, from_repo, to_repo, resources, from_pos, to_pos)
+
+        device_ids = {s["device_id"] for s in steps}
+        assert "zhixing_agv" in device_ids
+        assert "zhixing_ur_arm" in device_ids
+
+    def test_route_not_found(self):
+        """路由表中无对应路线时报错"""
+        G = _make_graph()
+        from_repo = {"Unknown": {"id": "Unknown", "children": {"A01": {"id": "R1", "parent": "Unknown"}}}}
+        to_repo = {"Other": {"id": "Other", "children": {}}}
+        resources = [{"id": "R1", "name": "R1"}]
+        with pytest.raises(KeyError, match="路由表"):
+            generate_batch_transfer_protocol(G, from_repo, to_repo, resources, ["A01"], ["B01"])
+
+    def test_length_mismatch(self):
+        """三个数组长度不一致时报错"""
+        G = _make_graph()
+        from_repo, to_repo = _make_repos(2)
+        resources = [{"id": "R1"}]
+        with pytest.raises(ValueError, match="长度不一致"):
+            generate_batch_transfer_protocol(G, from_repo, to_repo, resources, ["A01", "A02"], ["B01"])
+
+
+# ============ 改造后的 AGV 单物料编译器测试 ============
+
+class TestAGVTransferProtocol:
+    def test_single_transfer_from_config(self):
+        """改造后的单物料编译器从 G 读取配置"""
+        G = _make_graph()
+        from_repo = {"StationA": {"id": "StationA", "children": {"A01": {"id": "R1", "parent": "StationA"}}}}
+        to_repo = {"StationB": {"id": "StationB", "children": {}}}
+        steps = generate_agv_transfer_protocol(G, from_repo, "A01", to_repo, "B01")
+
+        assert len(steps) == 2
+        assert steps[0]["device_id"] == "zhixing_agv"
+        assert steps[0]["action_name"] == "send_nav_task"
+        assert steps[1]["device_id"] == "zhixing_ur_arm"
+        assert steps[1]["action_name"] == "move_pos_task"
+
+    def test_children_updated(self):
+        """单物料编译后 children dict 正确更新"""
+        G = _make_graph()
+        from_repo = {"StationA": {"id": "StationA", "children": {"A01": {"id": "R1", "parent": "StationA"}}}}
+        to_repo = {"StationB": {"id": "StationB", "children": {}}}
+        generate_agv_transfer_protocol(G, from_repo, "A01", to_repo, "B01")
+
+        assert "A01" not in from_repo["StationA"]["children"]
+        assert "B01" in to_repo["StationB"]["children"]
+        assert to_repo["StationB"]["children"]["B01"]["parent"] == "StationB"

tests/compile/test_full_chain_conversion_to_compile.py

@@ -0,0 +1,706 @@
+"""
+全链路集成测试：ROS Goal 转换 → ResourceTreeSet → get_plr_nested_dict → 编译器 → 动作列表
+
+模拟 workstation.py 中的完整路径：
+1. host 返回 raw_data（模拟 resource_get 响应）
+2. ResourceTreeSet.from_raw_dict_list(raw_data) 构建资源树
+3. tree.root_node.get_plr_nested_dict() 生成嵌套 dict
+4. protocol_kwargs 传给编译器
+5. 编译器返回 action_list，验证结构和关键字段
+"""
+
+import copy
+import json
+import pytest
+import networkx as nx
+
+from unilabos.resources.resource_tracker import (
+    ResourceDictInstance,
+    ResourceTreeSet,
+)
+from unilabos.compile.utils.resource_helper import (
+    ensure_resource_instance,
+    resource_to_dict,
+    get_resource_id,
+    get_resource_data,
+)
+from unilabos.compile.utils.vessel_parser import get_vessel
+
+# ============ 构建模拟设备图 ============
+
+def _build_test_graph():
+    """构建一个包含常用设备节点的测试图"""
+    G = nx.DiGraph()
+
+    # 容器
+    G.add_node("reactor_01", **{
+        "id": "reactor_01",
+        "name": "reactor_01",
+        "type": "device",
+        "class": "virtual_stirrer",
+        "data": {},
+        "config": {},
+    })
+
+    # 搅拌设备
+    G.add_node("stirrer_1", **{
+        "id": "stirrer_1",
+        "name": "stirrer_1",
+        "type": "device",
+        "class": "virtual_stirrer",
+        "data": {},
+        "config": {},
+    })
+    G.add_edge("stirrer_1", "reactor_01")
+
+    # 加热设备
+    G.add_node("heatchill_1", **{
+        "id": "heatchill_1",
+        "name": "heatchill_1",
+        "type": "device",
+        "class": "virtual_heatchill",
+        "data": {},
+        "config": {},
+    })
+    G.add_edge("heatchill_1", "reactor_01")
+
+    # 试剂容器（液体）
+    G.add_node("flask_water", **{
+        "id": "flask_water",
+        "name": "flask_water",
+        "type": "container",
+        "class": "",
+        "data": {"reagent_name": "water", "liquid": [{"liquid_type": "water", "volume": 500.0}]},
+        "config": {"reagent": "water"},
+    })
+
+    # 固体加样器
+    G.add_node("solid_dispenser_1", **{
+        "id": "solid_dispenser_1",
+        "name": "solid_dispenser_1",
+        "type": "device",
+        "class": "solid_dispenser",
+        "data": {},
+        "config": {},
+    })
+
+    # 泵
+    G.add_node("pump_1", **{
+        "id": "pump_1",
+        "name": "pump_1",
+        "type": "device",
+        "class": "virtual_pump",
+        "data": {},
+        "config": {},
+    })
+    G.add_edge("flask_water", "pump_1")
+    G.add_edge("pump_1", "reactor_01")
+
+    return G
+
+
+# ============ 构建模拟 host 返回数据 ============
+
+def _make_raw_resource(
+    id="reactor_01",
+    uuid="uuid-reactor-01",
+    name="reactor_01",
+    klass="virtual_stirrer",
+    type_="device",
+    parent=None,
+    parent_uuid=None,
+    data=None,
+    config=None,
+    extra=None,
+):
+    """模拟 host 返回的单个资源 dict（与 resource_get 服务响应一致）"""
+    return {
+        "id": id,
+        "uuid": uuid,
+        "name": name,
+        "class": klass,
+        "type": type_,
+        "parent": parent,
+        "parent_uuid": parent_uuid or "",
+        "description": "",
+        "config": config or {},
+        "data": data or {},
+        "extra": extra or {},
+        "position": {"x": 0.0, "y": 0.0, "z": 0.0},
+    }
+
+
+def _simulate_workstation_resource_enrichment(raw_data_list, field_type="unilabos_msgs/Resource"):
+    """
+    模拟 workstation.py 中 resource enrichment 的核心逻辑：
+    raw_data → ResourceTreeSet.from_raw_dict_list → get_plr_nested_dict → protocol_kwargs[k]
+    """
+    tree_set = ResourceTreeSet.from_raw_dict_list(raw_data_list)
+
+    if field_type == "unilabos_msgs/Resource":
+        # 单个 Resource：取第一棵树的根节点
+        root_instance = tree_set.trees[0].root_node if tree_set.trees else None
+        return root_instance.get_plr_nested_dict() if root_instance else {}
+    else:
+        # sequence<Resource>：返回列表
+        return [tree.root_node.get_plr_nested_dict() for tree in tree_set.trees]
+
+
+# ============ 全链路测试：Stir 协议 ============
+
+class TestStirProtocolFullChain:
+    """Stir 协议全链路：host raw_data → enriched dict → compiler → action_list"""
+
+    def test_stir_with_enriched_resource_dict(self):
+        """单个 Resource 经过 enrichment 后传给 stir compiler"""
+        from unilabos.compile.stir_protocol import generate_stir_protocol
+
+        raw_data = [_make_raw_resource(
+            id="reactor_01", uuid="uuid-reactor-01",
+            klass="virtual_stirrer", type_="device",
+        )]
+
+        # 模拟 workstation enrichment
+        enriched_vessel = _simulate_workstation_resource_enrichment(raw_data)
+
+        assert enriched_vessel["id"] == "reactor_01"
+        assert enriched_vessel["uuid"] == "uuid-reactor-01"
+        assert enriched_vessel["class"] == "virtual_stirrer"
+
+        # 传给编译器
+        G = _build_test_graph()
+        actions = generate_stir_protocol(
+            G=G,
+            vessel=enriched_vessel,
+            time="60",
+            stir_speed=300.0,
+        )
+
+        assert isinstance(actions, list)
+        assert len(actions) >= 1
+        action = actions[0]
+        assert action["device_id"] == "stirrer_1"
+        assert action["action_name"] == "stir"
+        assert "vessel" in action["action_kwargs"]
+        assert action["action_kwargs"]["vessel"]["id"] == "reactor_01"
+
+    def test_stir_with_resource_dict_instance(self):
+        """直接用 ResourceDictInstance 传给 stir compiler（通过 get_plr_nested_dict 转换）"""
+        from unilabos.compile.stir_protocol import generate_stir_protocol
+
+        raw_data = [_make_raw_resource(id="reactor_01")]
+        tree_set = ResourceTreeSet.from_raw_dict_list(raw_data)
+        inst = tree_set.trees[0].root_node
+
+        # 通过 resource_to_dict 转换（resource_helper 兼容层）
+        vessel_dict = resource_to_dict(inst)
+        assert isinstance(vessel_dict, dict)
+        assert vessel_dict["id"] == "reactor_01"
+
+        G = _build_test_graph()
+        actions = generate_stir_protocol(G=G, vessel=vessel_dict, time="30")
+
+        assert len(actions) >= 1
+        assert actions[0]["action_name"] == "stir"
+
+    def test_stir_with_string_vessel(self):
+        """兼容旧模式：直接传 vessel 字符串"""
+        from unilabos.compile.stir_protocol import generate_stir_protocol
+
+        G = _build_test_graph()
+        actions = generate_stir_protocol(G=G, vessel="reactor_01", time="30")
+
+        assert len(actions) >= 1
+        assert actions[0]["device_id"] == "stirrer_1"
+        assert actions[0]["action_kwargs"]["vessel"]["id"] == "reactor_01"
+
+
+# ============ 全链路测试：HeatChill 协议 ============
+
+class TestHeatChillProtocolFullChain:
+    """HeatChill 协议全链路"""
+
+    def test_heatchill_with_enriched_resource(self):
+        from unilabos.compile.heatchill_protocol import generate_heat_chill_protocol
+
+        raw_data = [_make_raw_resource(id="reactor_01", klass="virtual_stirrer")]
+        enriched_vessel = _simulate_workstation_resource_enrichment(raw_data)
+
+        G = _build_test_graph()
+        actions = generate_heat_chill_protocol(
+            G=G,
+            vessel=enriched_vessel,
+            temp=80.0,
+            time="300",
+        )
+
+        assert isinstance(actions, list)
+        assert len(actions) >= 1
+        action = actions[0]
+        assert action["device_id"] == "heatchill_1"
+        assert action["action_name"] == "heat_chill"
+        assert action["action_kwargs"]["temp"] == 80.0
+
+    def test_heatchill_start_with_enriched_resource(self):
+        from unilabos.compile.heatchill_protocol import generate_heat_chill_start_protocol
+
+        raw_data = [_make_raw_resource(id="reactor_01")]
+        enriched_vessel = _simulate_workstation_resource_enrichment(raw_data)
+
+        G = _build_test_graph()
+        actions = generate_heat_chill_start_protocol(
+            G=G,
+            vessel=enriched_vessel,
+            temp=60.0,
+        )
+
+        assert len(actions) >= 1
+        assert actions[0]["action_name"] == "heat_chill_start"
+        assert actions[0]["action_kwargs"]["temp"] == 60.0
+
+    def test_heatchill_stop_with_enriched_resource(self):
+        from unilabos.compile.heatchill_protocol import generate_heat_chill_stop_protocol
+
+        raw_data = [_make_raw_resource(id="reactor_01")]
+        enriched_vessel = _simulate_workstation_resource_enrichment(raw_data)
+
+        G = _build_test_graph()
+        actions = generate_heat_chill_stop_protocol(G=G, vessel=enriched_vessel)
+
+        assert len(actions) >= 1
+        assert actions[0]["action_name"] == "heat_chill_stop"
+
+
+# ============ 全链路测试：Add 协议 ============
+
+class TestAddProtocolFullChain:
+    """Add 协议全链路：vessel enrichment + reagent 查找 + 泵传输"""
+
+    def test_add_solid_with_enriched_resource(self):
+        from unilabos.compile.add_protocol import generate_add_protocol
+
+        raw_data = [_make_raw_resource(id="reactor_01")]
+        enriched_vessel = _simulate_workstation_resource_enrichment(raw_data)
+
+        G = _build_test_graph()
+        actions = generate_add_protocol(
+            G=G,
+            vessel=enriched_vessel,
+            reagent="NaCl",
+            mass="5 g",
+        )
+
+        assert isinstance(actions, list)
+        assert len(actions) >= 1
+        # 应该包含至少一个 add_solid 或 log_message 动作
+        action_names = [a.get("action_name", "") for a in actions]
+        assert any(name in ["add_solid", "log_message"] for name in action_names)
+
+    def test_add_liquid_with_enriched_resource(self):
+        from unilabos.compile.add_protocol import generate_add_protocol
+
+        raw_data = [_make_raw_resource(id="reactor_01")]
+        enriched_vessel = _simulate_workstation_resource_enrichment(raw_data)
+
+        G = _build_test_graph()
+        actions = generate_add_protocol(
+            G=G,
+            vessel=enriched_vessel,
+            reagent="water",
+            volume="10 mL",
+        )
+
+        assert isinstance(actions, list)
+        assert len(actions) >= 1
+
+
+# ============ 全链路测试：ResourceDictInstance 兼容层 ============
+
+class TestResourceDictInstanceCompatibility:
+    """验证编译器兼容层对 ResourceDictInstance 的处理"""
+
+    def test_get_vessel_from_enriched_dict(self):
+        """get_vessel 对 enriched dict 的处理"""
+        raw_data = [_make_raw_resource(
+            id="reactor_01",
+            data={"temperature": 25.0, "liquid": [{"liquid_type": "water", "volume": 10.0}]},
+        )]
+        enriched = _simulate_workstation_resource_enrichment(raw_data)
+
+        vessel_id, vessel_data = get_vessel(enriched)
+        assert vessel_id == "reactor_01"
+        assert vessel_data["temperature"] == 25.0
+        assert len(vessel_data["liquid"]) == 1
+
+    def test_get_vessel_from_resource_instance(self):
+        """get_vessel 直接对 ResourceDictInstance 的处理"""
+        raw_data = [_make_raw_resource(
+            id="reactor_01",
+            data={"temperature": 25.0},
+        )]
+        tree_set = ResourceTreeSet.from_raw_dict_list(raw_data)
+        inst = tree_set.trees[0].root_node
+
+        vessel_id, vessel_data = get_vessel(inst)
+        assert vessel_id == "reactor_01"
+        assert vessel_data["temperature"] == 25.0
+
+    def test_ensure_resource_instance_round_trip(self):
+        """ensure_resource_instance → resource_to_dict 无损往返"""
+        raw_data = [_make_raw_resource(
+            id="reactor_01", uuid="uuid-r01", klass="virtual_stirrer",
+            data={"temp": 25.0},
+        )]
+        enriched = _simulate_workstation_resource_enrichment(raw_data)
+
+        # dict → ResourceDictInstance
+        inst = ensure_resource_instance(enriched)
+        assert isinstance(inst, ResourceDictInstance)
+        assert inst.res_content.id == "reactor_01"
+        assert inst.res_content.uuid == "uuid-r01"
+
+        # ResourceDictInstance → dict
+        d = resource_to_dict(inst)
+        assert isinstance(d, dict)
+        assert d["id"] == "reactor_01"
+        assert d["uuid"] == "uuid-r01"
+        assert d["class"] == "virtual_stirrer"
+
+
+# ============ 全链路测试：带 children 的资源树 ============
+
+class TestResourceTreeWithChildren:
+    """测试带 children 结构的资源树通过编译器的路径"""
+
+    def _make_tree_with_children(self):
+        """构建 StationA -> [Flask1, Flask2] 的资源树"""
+        return [
+            _make_raw_resource(
+                id="StationA", uuid="uuid-station-a",
+                name="StationA", klass="workstation", type_="device",
+            ),
+            _make_raw_resource(
+                id="Flask1", uuid="uuid-flask-1",
+                name="Flask1", klass="", type_="resource",
+                parent="StationA", parent_uuid="uuid-station-a",
+                data={"liquid": [{"liquid_type": "water", "volume": 10.0}]},
+            ),
+            _make_raw_resource(
+                id="Flask2", uuid="uuid-flask-2",
+                name="Flask2", klass="", type_="resource",
+                parent="StationA", parent_uuid="uuid-station-a",
+                data={"liquid": [{"liquid_type": "ethanol", "volume": 5.0}]},
+            ),
+        ]
+
+    def test_enrichment_preserves_children_structure(self):
+        """验证 enrichment 后 children 为嵌套 dict"""
+        raw_data = self._make_tree_with_children()
+        enriched = _simulate_workstation_resource_enrichment(raw_data)
+
+        assert enriched["id"] == "StationA"
+        assert "children" in enriched
+        assert isinstance(enriched["children"], dict)
+        assert "Flask1" in enriched["children"]
+        assert "Flask2" in enriched["children"]
+
+    def test_children_preserve_uuid_and_data(self):
+        """验证 children 中的 uuid 和 data 被正确保留"""
+        raw_data = self._make_tree_with_children()
+        enriched = _simulate_workstation_resource_enrichment(raw_data)
+
+        flask1 = enriched["children"]["Flask1"]
+        assert flask1["uuid"] == "uuid-flask-1"
+        assert flask1["data"]["liquid"][0]["liquid_type"] == "water"
+        assert flask1["data"]["liquid"][0]["volume"] == 10.0
+
+        flask2 = enriched["children"]["Flask2"]
+        assert flask2["uuid"] == "uuid-flask-2"
+        assert flask2["data"]["liquid"][0]["liquid_type"] == "ethanol"
+
+    def test_children_dict_can_be_popped(self):
+        """模拟 batch_transfer_protocol 中 pop children 的操作"""
+        raw_data = self._make_tree_with_children()
+        enriched = _simulate_workstation_resource_enrichment(raw_data)
+
+        # batch_transfer_protocol 中会 pop children
+        children = enriched["children"]
+        popped = children.pop("Flask1")
+        assert popped["id"] == "Flask1"
+        assert "Flask1" not in enriched["children"]
+        assert "Flask2" in enriched["children"]
+
+    def test_children_dict_usable_as_from_repo(self):
+        """模拟 batch_transfer_protocol 中 from_repo 参数"""
+        raw_data = self._make_tree_with_children()
+        enriched = _simulate_workstation_resource_enrichment(raw_data)
+
+        # 模拟编译器接收的 from_repo 格式
+        from_repo = {"StationA": enriched}
+        from_repo_ = list(from_repo.values())[0]
+
+        assert from_repo_["id"] == "StationA"
+        assert "Flask1" in from_repo_["children"]
+        assert from_repo_["children"]["Flask1"]["uuid"] == "uuid-flask-1"
+
+    def test_sequence_resource_enrichment(self):
+        """sequence<Resource> 情况：多个独立资源树"""
+        raw_data1 = [_make_raw_resource(id="R1", uuid="uuid-r1")]
+        raw_data2 = [_make_raw_resource(id="R2", uuid="uuid-r2")]
+
+        tree_set1 = ResourceTreeSet.from_raw_dict_list(raw_data1)
+        tree_set2 = ResourceTreeSet.from_raw_dict_list(raw_data2)
+
+        results = [
+            tree.root_node.get_plr_nested_dict()
+            for ts in [tree_set1, tree_set2]
+            for tree in ts.trees
+        ]
+
+        assert len(results) == 2
+        assert results[0]["id"] == "R1"
+        assert results[1]["id"] == "R2"
+
+
+# ============ 全链路测试：动作列表结构验证 ============
+
+class TestActionListStructure:
+    """验证编译器返回的 action_list 结构符合 workstation 预期"""
+
+    def _validate_action(self, action):
+        """验证单个 action dict 的结构"""
+        if action.get("action_name") == "wait":
+            # wait 伪动作不需要 device_id
+            assert "action_kwargs" in action
+            assert "time" in action["action_kwargs"]
+            return
+
+        if action.get("action_name") == "log_message":
+            # log 伪动作
+            assert "action_kwargs" in action
+            return
+
+        # 正常设备动作
+        assert "device_id" in action, f"action 缺少 device_id: {action}"
+        assert "action_name" in action, f"action 缺少 action_name: {action}"
+        assert "action_kwargs" in action, f"action 缺少 action_kwargs: {action}"
+        assert isinstance(action["action_kwargs"], dict)
+
+    def test_stir_action_list_structure(self):
+        from unilabos.compile.stir_protocol import generate_stir_protocol
+
+        raw_data = [_make_raw_resource(id="reactor_01")]
+        enriched = _simulate_workstation_resource_enrichment(raw_data)
+
+        G = _build_test_graph()
+        actions = generate_stir_protocol(G=G, vessel=enriched, time="60")
+
+        for action in actions:
+            if isinstance(action, list):
+                # 并行动作
+                for sub_action in action:
+                    self._validate_action(sub_action)
+            else:
+                self._validate_action(action)
+
+    def test_heatchill_action_list_structure(self):
+        from unilabos.compile.heatchill_protocol import generate_heat_chill_protocol
+
+        raw_data = [_make_raw_resource(id="reactor_01")]
+        enriched = _simulate_workstation_resource_enrichment(raw_data)
+
+        G = _build_test_graph()
+        actions = generate_heat_chill_protocol(G=G, vessel=enriched, temp=80.0, time="60")
+
+        for action in actions:
+            if isinstance(action, list):
+                for sub_action in action:
+                    self._validate_action(sub_action)
+            else:
+                self._validate_action(action)
+
+    def test_add_action_list_structure(self):
+        from unilabos.compile.add_protocol import generate_add_protocol
+
+        raw_data = [_make_raw_resource(id="reactor_01")]
+        enriched = _simulate_workstation_resource_enrichment(raw_data)
+
+        G = _build_test_graph()
+        actions = generate_add_protocol(G=G, vessel=enriched, reagent="NaCl", mass="5 g")
+
+        for action in actions:
+            if isinstance(action, list):
+                for sub_action in action:
+                    self._validate_action(sub_action)
+            else:
+                self._validate_action(action)
+
+
+# ============ 全链路测试：message_converter 到 enrichment ============
+
+class TestMessageConverterToEnrichment:
+    """模拟从 ROS 消息转换后的 dict 到 enrichment 的完整链路"""
+
+    def test_ros_goal_conversion_simulation(self):
+        """
+        模拟 workstation.py 中的完整流程：
+        1. ROS goal 中的 vessel 字段被 convert_from_ros_msg 转换为浅层 dict
+        2. workstation 用 resource_id 请求 host 获取完整资源数据
+        3. ResourceTreeSet.from_raw_dict_list 构建资源树
+        4. get_plr_nested_dict 生成嵌套 dict 替换 protocol_kwargs[k]
+        """
+        # 步骤1: 模拟 convert_from_ros_msg 的输出（浅层 dict，只有 id 等基本字段）
+        shallow_vessel = {
+            "id": "reactor_01",
+            "uuid": "uuid-reactor-01",
+            "name": "reactor_01",
+            "type": "device",
+            "category": "virtual_stirrer",
+            "children": [],
+            "parent": "",
+            "parent_uuid": "",
+            "config": {},
+            "data": {},
+            "extra": {},
+            "position": {"x": 0.0, "y": 0.0, "z": 0.0},
+        }
+
+        protocol_kwargs = {
+            "vessel": shallow_vessel,
+            "time": "300",
+            "stir_speed": 300.0,
+        }
+
+        # 步骤2: 提取 resource_id
+        resource_id = protocol_kwargs["vessel"]["id"]
+        assert resource_id == "reactor_01"
+
+        # 步骤3: 模拟 host 返回完整数据（带 children）
+        host_response = [
+            _make_raw_resource(
+                id="reactor_01", uuid="uuid-reactor-01",
+                klass="virtual_stirrer", type_="device",
+                data={"temperature": 25.0, "pressure": 1.0},
+                config={"max_temp": 300.0},
+            ),
+        ]
+
+        # 步骤4: enrichment
+        enriched = _simulate_workstation_resource_enrichment(host_response)
+        protocol_kwargs["vessel"] = enriched
+
+        # 验证 enrichment 后的 protocol_kwargs
+        assert protocol_kwargs["vessel"]["id"] == "reactor_01"
+        assert protocol_kwargs["vessel"]["uuid"] == "uuid-reactor-01"
+        assert protocol_kwargs["vessel"]["class"] == "virtual_stirrer"
+        assert protocol_kwargs["vessel"]["data"]["temperature"] == 25.0
+        assert protocol_kwargs["vessel"]["config"]["max_temp"] == 300.0
+
+        # 步骤5: 传给编译器
+        from unilabos.compile.stir_protocol import generate_stir_protocol
+        G = _build_test_graph()
+        actions = generate_stir_protocol(G=G, **protocol_kwargs)
+
+        assert len(actions) >= 1
+        assert actions[0]["device_id"] == "stirrer_1"
+        assert actions[0]["action_name"] == "stir"
+
+    def test_ros_goal_with_children_enrichment(self):
+        """ROS goal → enrichment 带 children 的场景（batch transfer）"""
+        # 模拟 host 返回带 children 的数据
+        host_response = [
+            _make_raw_resource(
+                id="StationA", uuid="uuid-sa", klass="workstation", type_="device",
+                config={"num_items_x": 4, "num_items_y": 2},
+            ),
+            _make_raw_resource(
+                id="Plate1", uuid="uuid-p1", type_="resource",
+                parent="StationA", parent_uuid="uuid-sa",
+                data={"sample": "sample_A"},
+            ),
+            _make_raw_resource(
+                id="Plate2", uuid="uuid-p2", type_="resource",
+                parent="StationA", parent_uuid="uuid-sa",
+                data={"sample": "sample_B"},
+            ),
+        ]
+
+        enriched = _simulate_workstation_resource_enrichment(host_response)
+
+        assert enriched["id"] == "StationA"
+        assert enriched["class"] == "workstation"
+        assert len(enriched["children"]) == 2
+        assert enriched["children"]["Plate1"]["data"]["sample"] == "sample_A"
+        assert enriched["children"]["Plate2"]["uuid"] == "uuid-p2"
+
+        # 模拟 batch_transfer 的 from_repo 格式
+        from_repo = {"StationA": enriched}
+        from_repo_ = list(from_repo.values())[0]
+        assert "Plate1" in from_repo_["children"]
+        assert from_repo_["children"]["Plate1"]["uuid"] == "uuid-p1"
+
+
+# ============ 全链路测试：多协议连续调用 ============
+
+class TestMultiProtocolChain:
+    """模拟连续执行多个协议（如 add → stir → heatchill）"""
+
+    def test_sequential_protocol_execution(self):
+        """模拟典型合成路径：add → stir → heatchill"""
+        from unilabos.compile.stir_protocol import generate_stir_protocol
+        from unilabos.compile.heatchill_protocol import generate_heat_chill_protocol
+        from unilabos.compile.add_protocol import generate_add_protocol
+
+        raw_data = [_make_raw_resource(
+            id="reactor_01", uuid="uuid-reactor-01",
+            klass="virtual_stirrer", type_="device",
+        )]
+        enriched = _simulate_workstation_resource_enrichment(raw_data)
+        G = _build_test_graph()
+
+        # 每次调用用 enriched 的副本，避免编译器修改原数据
+        all_actions = []
+
+        # 步骤1: 添加试剂
+        add_actions = generate_add_protocol(
+            G=G, vessel=copy.deepcopy(enriched),
+            reagent="NaCl", mass="5 g",
+        )
+        all_actions.extend(add_actions)
+
+        # 步骤2: 搅拌
+        stir_actions = generate_stir_protocol(
+            G=G, vessel=copy.deepcopy(enriched),
+            time="60", stir_speed=300.0,
+        )
+        all_actions.extend(stir_actions)
+
+        # 步骤3: 加热
+        heat_actions = generate_heat_chill_protocol(
+            G=G, vessel=copy.deepcopy(enriched),
+            temp=80.0, time="300",
+        )
+        all_actions.extend(heat_actions)
+
+        # 验证总动作列表
+        assert len(all_actions) >= 3
+        # 每个协议至少产生一个核心动作
+        action_names = [a.get("action_name", "") for a in all_actions if isinstance(a, dict)]
+        assert "stir" in action_names
+        assert "heat_chill" in action_names
+
+    def test_enriched_resource_not_mutated(self):
+        """验证编译器不应修改传入的 enriched dict（如果需要修改应 deepcopy）"""
+        from unilabos.compile.stir_protocol import generate_stir_protocol
+
+        raw_data = [_make_raw_resource(id="reactor_01")]
+        enriched = _simulate_workstation_resource_enrichment(raw_data)
+        original_id = enriched["id"]
+        original_uuid = enriched["uuid"]
+
+        G = _build_test_graph()
+        generate_stir_protocol(G=G, vessel=enriched, time="60")
+
+        # 验证 enriched dict 核心字段未被修改
+        assert enriched["id"] == original_id
+        assert enriched["uuid"] == original_uuid

tests/compile/test_pump_separate_full_chain.py

@@ -0,0 +1,538 @@
+"""
+PumpTransfer 和 Separate 全链路测试
+
+构建包含泵/阀门/分液漏斗的完整设备图，
+输出完整的中间数据（最短路径、泵骨架、动作列表等）。
+"""
+
+import copy
+import json
+import pprint
+import pytest
+import networkx as nx
+
+from unilabos.resources.resource_tracker import ResourceTreeSet
+from unilabos.compile.utils.resource_helper import get_resource_id, get_resource_data
+from unilabos.compile.utils.vessel_parser import get_vessel
+
+
+def _make_raw_resource(id, uuid=None, name=None, klass="", type_="device",
+                       parent=None, parent_uuid=None, data=None, config=None, extra=None):
+    return {
+        "id": id,
+        "uuid": uuid or f"uuid-{id}",
+        "name": name or id,
+        "class": klass,
+        "type": type_,
+        "parent": parent,
+        "parent_uuid": parent_uuid or "",
+        "description": "",
+        "config": config or {},
+        "data": data or {},
+        "extra": extra or {},
+        "position": {"x": 0.0, "y": 0.0, "z": 0.0},
+    }
+
+
+def _simulate_enrichment(raw_data_list):
+    tree_set = ResourceTreeSet.from_raw_dict_list(raw_data_list)
+    root = tree_set.trees[0].root_node if tree_set.trees else None
+    return root.get_plr_nested_dict() if root else {}
+
+
+def _build_pump_transfer_graph():
+    """
+    构建带泵/阀门的设备图，用于测试 PumpTransfer:
+
+    flask_water (container)
+        ↓
+    valve_1 (multiway_valve, pump_1 连接)
+        ↓
+    reactor_01 (device)
+
+    同时有: stirrer_1, heatchill_1, separator_1
+    """
+    G = nx.DiGraph()
+
+    # 源容器
+    G.add_node("flask_water", **{
+        "id": "flask_water", "name": "flask_water",
+        "type": "container", "class": "",
+        "data": {"reagent_name": "water", "liquid": [{"liquid_type": "water", "volume": 200.0}]},
+        "config": {"reagent": "water"},
+    })
+
+    # 多通阀
+    G.add_node("valve_1", **{
+        "id": "valve_1", "name": "valve_1",
+        "type": "device", "class": "multiway_valve",
+        "data": {}, "config": {},
+    })
+
+    # 注射泵（连接到阀门）
+    G.add_node("pump_1", **{
+        "id": "pump_1", "name": "pump_1",
+        "type": "device", "class": "virtual_pump",
+        "data": {}, "config": {"max_volume": 25.0},
+    })
+
+    # 目标容器
+    G.add_node("reactor_01", **{
+        "id": "reactor_01", "name": "reactor_01",
+        "type": "device", "class": "virtual_stirrer",
+        "data": {"liquid": [{"liquid_type": "water", "volume": 50.0}]},
+        "config": {},
+    })
+
+    # 搅拌器
+    G.add_node("stirrer_1", **{
+        "id": "stirrer_1", "name": "stirrer_1",
+        "type": "device", "class": "virtual_stirrer",
+        "data": {}, "config": {},
+    })
+
+    # 加热器
+    G.add_node("heatchill_1", **{
+        "id": "heatchill_1", "name": "heatchill_1",
+        "type": "device", "class": "virtual_heatchill",
+        "data": {}, "config": {},
+    })
+
+    # 分离器
+    G.add_node("separator_1", **{
+        "id": "separator_1", "name": "separator_1",
+        "type": "device", "class": "separator_controller",
+        "data": {}, "config": {},
+    })
+
+    # 废液容器
+    G.add_node("waste_workup", **{
+        "id": "waste_workup", "name": "waste_workup",
+        "type": "container", "class": "",
+        "data": {}, "config": {},
+    })
+
+    # 产物收集瓶
+    G.add_node("product_flask", **{
+        "id": "product_flask", "name": "product_flask",
+        "type": "container", "class": "",
+        "data": {}, "config": {},
+    })
+
+    # DCM溶剂瓶
+    G.add_node("flask_dcm", **{
+        "id": "flask_dcm", "name": "flask_dcm",
+        "type": "container", "class": "",
+        "data": {"reagent_name": "dcm", "liquid": [{"liquid_type": "dcm", "volume": 500.0}]},
+        "config": {"reagent": "dcm"},
+    })
+
+    # 边连接 —— flask_water → valve_1 → reactor_01
+    G.add_edge("flask_water", "valve_1", port={"valve_1": "port_1"})
+    G.add_edge("valve_1", "reactor_01", port={"valve_1": "port_2"})
+    # 阀门 → 泵
+    G.add_edge("valve_1", "pump_1")
+    G.add_edge("pump_1", "valve_1")
+    # 搅拌器 ↔ reactor
+    G.add_edge("stirrer_1", "reactor_01")
+    # 加热器 ↔ reactor
+    G.add_edge("heatchill_1", "reactor_01")
+    # 分离器 ↔ reactor
+    G.add_edge("separator_1", "reactor_01")
+    G.add_edge("reactor_01", "separator_1")
+    # DCM → valve → reactor (同一泵路)
+    G.add_edge("flask_dcm", "valve_1", port={"valve_1": "port_3"})
+    # reactor → valve → product/waste
+    G.add_edge("valve_1", "product_flask", port={"valve_1": "port_4"})
+    G.add_edge("valve_1", "waste_workup", port={"valve_1": "port_5"})
+
+    return G
+
+
+def _format_action(action, indent=0):
+    """格式化单个 action 为可读字符串"""
+    prefix = "  " * indent
+    if isinstance(action, list):
+        # 并行动作
+        lines = [f"{prefix}[PARALLEL]"]
+        for sub in action:
+            lines.append(_format_action(sub, indent + 1))
+        return "\n".join(lines)
+
+    name = action.get("action_name", "?")
+    device = action.get("device_id", "")
+    kwargs = action.get("action_kwargs", {})
+    comment = action.get("_comment", "")
+    meta = action.get("_transfer_meta", "")
+
+    parts = [f"{prefix}→ {device}::{name}"]
+    if kwargs:
+        # 精简输出
+        kw_str = ", ".join(f"{k}={v}" for k, v in kwargs.items()
+                           if k not in ("progress_message",))
+        if kw_str:
+            parts.append(f"  kwargs: {{{kw_str}}}")
+    if comment:
+        parts.append(f"  # {comment}")
+    if meta:
+        parts.append(f"  meta: {meta}")
+    return "\n".join(f"{prefix}{p}" if i > 0 else p for i, p in enumerate(parts))
+
+
+def _dump_actions(actions, title=""):
+    """打印完整动作列表"""
+    print(f"\n{'='*70}")
+    print(f"  {title}")
+    print(f"  总动作数: {len(actions)}")
+    print(f"{'='*70}")
+    for i, action in enumerate(actions):
+        print(f"\n  [{i:02d}] {_format_action(action, indent=2)}")
+    print(f"\n{'='*70}\n")
+
+
+# ==================== PumpTransfer 全链路 ====================
+
+class TestPumpTransferFullChain:
+    """PumpTransfer: 包含图路径查找、泵骨架构建、动作序列生成"""
+
+    def test_pump_transfer_basic(self):
+        """基础泵转移：flask_water → valve_1 → reactor_01"""
+        from unilabos.compile.pump_protocol import generate_pump_protocol
+
+        G = _build_pump_transfer_graph()
+
+        # 检查最短路径
+        path = nx.shortest_path(G, "flask_water", "reactor_01")
+        print(f"\n最短路径: {path}")
+        assert "valve_1" in path
+
+        # 调用编译器
+        actions = generate_pump_protocol(
+            G=G,
+            from_vessel_id="flask_water",
+            to_vessel_id="reactor_01",
+            volume=10.0,
+            flowrate=2.5,
+            transfer_flowrate=0.5,
+        )
+
+        _dump_actions(actions, "PumpTransfer: flask_water → reactor_01, 10mL")
+
+        # 验证
+        assert isinstance(actions, list)
+        assert len(actions) > 0
+        # 应该有 set_valve_position 和 set_position 动作
+        flat = [a for a in actions if isinstance(a, dict)]
+        action_names = [a.get("action_name") for a in flat]
+        print(f"动作名称列表: {action_names}")
+        assert "set_valve_position" in action_names
+        assert "set_position" in action_names
+
+    def test_pump_transfer_with_rinsing_enriched_vessel(self):
+        """pump_with_rinsing 接收 enriched vessel dict"""
+        from unilabos.compile.pump_protocol import generate_pump_protocol_with_rinsing
+
+        G = _build_pump_transfer_graph()
+
+        # 模拟 enrichment
+        from_raw = [_make_raw_resource(
+            id="flask_water", klass="", type_="container",
+            data={"reagent_name": "water", "liquid": [{"liquid_type": "water", "volume": 200.0}]},
+        )]
+        to_raw = [_make_raw_resource(
+            id="reactor_01", klass="virtual_stirrer", type_="device",
+        )]
+
+        from_enriched = _simulate_enrichment(from_raw)
+        to_enriched = _simulate_enrichment(to_raw)
+
+        print(f"\nfrom_vessel enriched: {json.dumps(from_enriched, indent=2, ensure_ascii=False)[:300]}...")
+        print(f"to_vessel enriched: {json.dumps(to_enriched, indent=2, ensure_ascii=False)[:300]}...")
+
+        # get_vessel 兼容
+        fid, fdata = get_vessel(from_enriched)
+        tid, tdata = get_vessel(to_enriched)
+        print(f"from_vessel_id={fid}, to_vessel_id={tid}")
+        assert fid == "flask_water"
+        assert tid == "reactor_01"
+
+        actions = generate_pump_protocol_with_rinsing(
+            G=G,
+            from_vessel=from_enriched,
+            to_vessel=to_enriched,
+            volume=15.0,
+            flowrate=2.5,
+            transfer_flowrate=0.5,
+        )
+
+        _dump_actions(actions, "PumpTransferWithRinsing: flask_water → reactor_01, 15mL (enriched)")
+
+        assert isinstance(actions, list)
+        assert len(actions) > 0
+
+    def test_pump_transfer_multi_batch(self):
+        """体积 > max_volume 时自动分批"""
+        from unilabos.compile.pump_protocol import generate_pump_protocol
+
+        G = _build_pump_transfer_graph()
+
+        # pump_1 的 max_volume = 25mL，转 60mL 应该分 3 批
+        actions = generate_pump_protocol(
+            G=G,
+            from_vessel_id="flask_water",
+            to_vessel_id="reactor_01",
+            volume=60.0,
+            flowrate=2.5,
+            transfer_flowrate=0.5,
+        )
+
+        _dump_actions(actions, "PumpTransfer 分批: 60mL (max_volume=25mL, 预期 3 批)")
+
+        assert len(actions) > 0
+        # 应该有多轮 set_position
+        flat = [a for a in actions if isinstance(a, dict)]
+        set_position_count = sum(1 for a in flat if a.get("action_name") == "set_position")
+        print(f"set_position 动作数: {set_position_count}")
+        # 3批 × 2次 (吸液 + 排液) = 6 次 set_position
+        assert set_position_count >= 6
+
+    def test_pump_transfer_no_path(self):
+        """无路径时返回空"""
+        from unilabos.compile.pump_protocol import generate_pump_protocol
+
+        G = _build_pump_transfer_graph()
+        G.add_node("isolated_flask", type="container")
+
+        actions = generate_pump_protocol(
+            G=G,
+            from_vessel_id="isolated_flask",
+            to_vessel_id="reactor_01",
+            volume=10.0,
+        )
+
+        print(f"\n无路径时的动作列表: {actions}")
+        assert actions == []
+
+    def test_pump_backbone_filtering(self):
+        """验证泵骨架过滤逻辑（电磁阀被跳过）"""
+        from unilabos.compile.pump_protocol import generate_pump_protocol
+
+        G = _build_pump_transfer_graph()
+        # 添加电磁阀到路径中
+        G.add_node("solenoid_valve_1", **{
+            "type": "device", "class": "solenoid_valve",
+            "data": {}, "config": {},
+        })
+        # flask_water → solenoid_valve_1 → valve_1 → reactor_01
+        G.remove_edge("flask_water", "valve_1")
+        G.add_edge("flask_water", "solenoid_valve_1")
+        G.add_edge("solenoid_valve_1", "valve_1")
+
+        path = nx.shortest_path(G, "flask_water", "reactor_01")
+        print(f"\n含电磁阀的路径: {path}")
+        assert "solenoid_valve_1" in path
+
+        actions = generate_pump_protocol(
+            G=G,
+            from_vessel_id="flask_water",
+            to_vessel_id="reactor_01",
+            volume=10.0,
+        )
+
+        _dump_actions(actions, "PumpTransfer 含电磁阀: flask_water → solenoid → valve_1 → reactor_01")
+        # 电磁阀应被跳过，泵骨架只有 valve_1
+        assert len(actions) > 0
+
+
+# ==================== Separate 全链路 ====================
+
+class TestSeparateProtocolFullChain:
+    """Separate: 包含 bug 确认和正常路径测试"""
+
+    def test_separate_bug_line_128_fixed(self):
+        """验证 separate_protocol.py:128 的 bug 已修复（不再 crash）"""
+        from unilabos.compile.separate_protocol import generate_separate_protocol
+
+        G = _build_pump_transfer_graph()
+
+        raw_data = [_make_raw_resource(
+            id="reactor_01", klass="virtual_stirrer",
+            data={"liquid": [{"liquid_type": "water", "volume": 100.0}]},
+        )]
+        enriched = _simulate_enrichment(raw_data)
+
+        # 修复前：final_vessel_id, _ = vessel_id 会 crash（字符串解包）
+        # 修复后：final_vessel_id = vessel_id，正常返回 action 列表
+        result = generate_separate_protocol(
+            G=G,
+            vessel=enriched,
+            purpose="extract",
+            product_phase="top",
+            product_vessel="product_flask",
+            waste_vessel="waste_workup",
+            solvent="dcm",
+            volume="100 mL",
+        )
+        assert isinstance(result, list)
+        assert len(result) > 0
+
+    def test_separate_manual_workaround(self):
+        """
+        绕过 line 128 bug，手动测试分离编译器中可以工作的子函数
+        """
+        from unilabos.compile.separate_protocol import (
+            find_separator_device,
+            find_separation_vessel_bottom,
+        )
+        from unilabos.compile.utils.vessel_parser import (
+            find_connected_stirrer,
+            find_solvent_vessel,
+        )
+        from unilabos.compile.utils.unit_parser import parse_volume_input
+        from unilabos.compile.utils.resource_helper import get_resource_liquid_volume as get_vessel_liquid_volume
+
+        G = _build_pump_transfer_graph()
+
+        # 1. get_vessel 解析 enriched dict
+        raw_data = [_make_raw_resource(
+            id="reactor_01", klass="virtual_stirrer",
+            data={"liquid": [{"liquid_type": "water", "volume": 100.0}]},
+        )]
+        enriched = _simulate_enrichment(raw_data)
+        vessel_id, vessel_data = get_vessel(enriched)
+        print(f"\nvessel_id: {vessel_id}")
+        print(f"vessel_data: {vessel_data}")
+        assert vessel_id == "reactor_01"
+        assert vessel_data["liquid"][0]["volume"] == 100.0
+
+        # 2. find_separator_device
+        sep = find_separator_device(G, vessel_id)
+        print(f"分离器设备: {sep}")
+        assert sep == "separator_1"
+
+        # 3. find_connected_stirrer
+        stirrer = find_connected_stirrer(G, vessel_id)
+        print(f"搅拌器设备: {stirrer}")
+        assert stirrer == "stirrer_1"
+
+        # 4. find_solvent_vessel
+        solvent_v = find_solvent_vessel(G, "dcm")
+        print(f"DCM溶剂容器: {solvent_v}")
+        assert solvent_v == "flask_dcm"
+
+        # 5. parse_volume_input
+        vol = parse_volume_input("200 mL")
+        print(f"体积解析: '200 mL' → {vol}")
+        assert vol == 200.0
+
+        vol2 = parse_volume_input("1.5 L")
+        print(f"体积解析: '1.5 L' → {vol2}")
+        assert vol2 == 1500.0
+
+        # 6. get_vessel_liquid_volume
+        liq_vol = get_vessel_liquid_volume(enriched)
+        print(f"液体体积 (enriched dict): {liq_vol}")
+        assert liq_vol == 100.0
+
+        # 7. find_separation_vessel_bottom
+        bottom = find_separation_vessel_bottom(G, vessel_id)
+        print(f"分离容器底部: {bottom}")
+        # 当前图中没有命名匹配的底部容器
+
+    def test_pump_transfer_for_separate_subflow(self):
+        """测试 separate 中调用的 pump 子流程（溶剂添加 → 分液漏斗）"""
+        from unilabos.compile.pump_protocol import generate_pump_protocol_with_rinsing
+
+        G = _build_pump_transfer_graph()
+
+        # 模拟分离前的溶剂添加步骤
+        actions = generate_pump_protocol_with_rinsing(
+            G=G,
+            from_vessel="flask_dcm",
+            to_vessel="reactor_01",
+            volume=100.0,
+            flowrate=2.5,
+            transfer_flowrate=0.5,
+        )
+
+        _dump_actions(actions, "Separate 子流程: flask_dcm → reactor_01, 100mL DCM")
+
+        assert isinstance(actions, list)
+        assert len(actions) > 0
+
+        # 模拟分离后产物转移
+        actions2 = generate_pump_protocol_with_rinsing(
+            G=G,
+            from_vessel="reactor_01",
+            to_vessel="product_flask",
+            volume=50.0,
+            flowrate=2.5,
+            transfer_flowrate=0.5,
+        )
+
+        _dump_actions(actions2, "Separate 子流程: reactor_01 → product_flask, 50mL 产物")
+
+        assert len(actions2) > 0
+
+        # 废液转移
+        actions3 = generate_pump_protocol_with_rinsing(
+            G=G,
+            from_vessel="reactor_01",
+            to_vessel="waste_workup",
+            volume=50.0,
+            flowrate=2.5,
+            transfer_flowrate=0.5,
+        )
+
+        _dump_actions(actions3, "Separate 子流程: reactor_01 → waste_workup, 50mL 废液")
+
+        assert len(actions3) > 0
+
+
+# ==================== 图路径可视化 ====================
+
+class TestGraphPathVisualization:
+    """输出图中关键路径信息"""
+
+    def test_all_shortest_paths(self):
+        """输出所有容器之间的最短路径"""
+        G = _build_pump_transfer_graph()
+
+        containers = [n for n in G.nodes() if G.nodes[n].get("type") == "container"]
+        devices = [n for n in G.nodes() if G.nodes[n].get("type") == "device"]
+
+        print(f"\n{'='*70}")
+        print(f"  设备图概览")
+        print(f"{'='*70}")
+        print(f"  容器节点 ({len(containers)}): {containers}")
+        print(f"  设备节点 ({len(devices)}): {devices}")
+        print(f"  边数: {G.number_of_edges()}")
+        print(f"  边列表:")
+        for u, v, data in G.edges(data=True):
+            port_info = data.get("port", "")
+            print(f"    {u} → {v}  {port_info if port_info else ''}")
+
+        print(f"\n  关键路径:")
+        pairs = [
+            ("flask_water", "reactor_01"),
+            ("flask_dcm", "reactor_01"),
+            ("reactor_01", "product_flask"),
+            ("reactor_01", "waste_workup"),
+            ("flask_water", "product_flask"),
+        ]
+        for src, dst in pairs:
+            try:
+                path = nx.shortest_path(G, src, dst)
+                length = len(path) - 1
+                # 标注路径上的节点类型
+                annotated = []
+                for n in path:
+                    ntype = G.nodes[n].get("type", "?")
+                    nclass = G.nodes[n].get("class", "")
+                    annotated.append(f"{n}({ntype}{'/' + nclass if nclass else ''})")
+                print(f"    {src} → {dst}: 距离={length}")
+                print(f"      路径: {' → '.join(annotated)}")
+            except nx.NetworkXNoPath:
+                print(f"    {src} → {dst}: 无路径!")
+
+        print(f"{'='*70}\n")

tests/compile/test_resource_conversion_path.py

@@ -0,0 +1,324 @@
+"""
+ROS Goal → Resource 转换 → 编译器路径的集成测试
+
+覆盖：
+1. Resource.msg 新字段(uuid, klass, extra)的往返转换
+2. dict → ROS Resource → dict 往返无损
+3. ResourceTreeSet → get_plr_nested_dict 保留 children 结构
+4. resource_helper 兼容 dict / ResourceDictInstance
+5. vessel_parser.get_vessel 兼容 ResourceDictInstance
+"""
+
+import json
+import pytest
+
+# 不依赖 ROS 的测试 —— 直接测试 resource 处理路径
+from unilabos.resources.resource_tracker import (
+    ResourceDict,
+    ResourceDictInstance,
+    ResourceTreeInstance,
+    ResourceTreeSet,
+)
+from unilabos.compile.utils.resource_helper import (
+    ensure_resource_instance,
+    resource_to_dict,
+    get_resource_id,
+    get_resource_data,
+    get_resource_display_info,
+    get_resource_liquid_volume,
+)
+from unilabos.compile.utils.vessel_parser import get_vessel
+
+
+# ============ 构建测试数据 ============
+
+
+def _make_resource_dict(
+    id="reactor_01",
+    uuid="uuid-reactor-01",
+    name="reactor_01",
+    klass="virtual_stirrer",
+    type_="device",
+    parent=None,
+    parent_uuid=None,
+    data=None,
+    config=None,
+    extra=None,
+):
+    return {
+        "id": id,
+        "uuid": uuid,
+        "name": name,
+        "class": klass,
+        "type": type_,
+        "parent": parent,
+        "parent_uuid": parent_uuid or "",
+        "description": "",
+        "config": config or {},
+        "data": data or {},
+        "extra": extra or {},
+        "position": {"x": 1.0, "y": 2.0, "z": 3.0},
+    }
+
+
+def _make_resource_instance(id="reactor_01", **kwargs):
+    d = _make_resource_dict(id=id, **kwargs)
+    return ResourceDictInstance.get_resource_instance_from_dict(d)
+
+
+def _make_tree_with_children():
+    """构建 StationA -> [R1, R2] 的资源树"""
+    raw_data = [
+        _make_resource_dict(
+            id="StationA",
+            uuid="uuid-station-a",
+            name="StationA",
+            klass="workstation",
+            type_="device",
+        ),
+        _make_resource_dict(
+            id="R1",
+            uuid="uuid-r1",
+            name="R1",
+            klass="",
+            type_="resource",
+            parent="StationA",
+            parent_uuid="uuid-station-a",
+            data={"liquid": [{"liquid_type": "water", "volume": 10.0}]},
+        ),
+        _make_resource_dict(
+            id="R2",
+            uuid="uuid-r2",
+            name="R2",
+            klass="",
+            type_="resource",
+            parent="StationA",
+            parent_uuid="uuid-station-a",
+            data={"liquid": [{"liquid_type": "ethanol", "volume": 5.0}]},
+        ),
+    ]
+    tree_set = ResourceTreeSet.from_raw_dict_list(raw_data)
+    return tree_set
+
+
+# ============ resource_helper 测试 ============
+
+
+class TestResourceHelper:
+    """测试 resource_helper 对 dict / ResourceDictInstance 的兼容性"""
+
+    def test_ensure_resource_instance_from_dict(self):
+        d = _make_resource_dict()
+        inst = ensure_resource_instance(d)
+        assert isinstance(inst, ResourceDictInstance)
+        assert inst.res_content.id == "reactor_01"
+        assert inst.res_content.uuid == "uuid-reactor-01"
+
+    def test_ensure_resource_instance_passthrough(self):
+        inst = _make_resource_instance()
+        result = ensure_resource_instance(inst)
+        assert result is inst  # 同一个对象，不复制
+
+    def test_ensure_resource_instance_none(self):
+        assert ensure_resource_instance(None) is None
+
+    def test_get_resource_id_from_dict(self):
+        d = _make_resource_dict(id="my_device")
+        assert get_resource_id(d) == "my_device"
+
+    def test_get_resource_id_from_instance(self):
+        inst = _make_resource_instance(id="my_device")
+        assert get_resource_id(inst) == "my_device"
+
+    def test_get_resource_id_from_string(self):
+        assert get_resource_id("my_device") == "my_device"
+
+    def test_get_resource_id_from_wrapped_dict(self):
+        """兼容 {station_id: {...}} 格式"""
+        d = {"StationA": {"id": "StationA", "name": "StationA"}}
+        assert get_resource_id(d) == "StationA"
+
+    def test_get_resource_data_from_dict(self):
+        d = _make_resource_dict(data={"temperature": 25.0})
+        assert get_resource_data(d) == {"temperature": 25.0}
+
+    def test_get_resource_data_from_instance(self):
+        inst = _make_resource_instance(data={"temperature": 25.0})
+        data = get_resource_data(inst)
+        assert data["temperature"] == 25.0
+
+    def test_get_resource_display_info_from_dict(self):
+        d = _make_resource_dict(id="reactor_01", name="Reactor #1")
+        info = get_resource_display_info(d)
+        assert "reactor_01" in info
+        assert "Reactor #1" in info
+
+    def test_get_resource_display_info_from_instance(self):
+        inst = _make_resource_instance(id="reactor_01", name="Reactor #1")
+        info = get_resource_display_info(inst)
+        assert "reactor_01" in info
+
+    def test_get_resource_display_info_from_string(self):
+        assert get_resource_display_info("reactor_01") == "reactor_01"
+
+    def test_get_resource_liquid_volume(self):
+        d = _make_resource_dict(data={"liquid": [{"liquid_type": "water", "volume": 15.5}]})
+        assert get_resource_liquid_volume(d) == pytest.approx(15.5)
+
+    def test_resource_to_dict_from_instance(self):
+        inst = _make_resource_instance(id="reactor_01", klass="virtual_stirrer")
+        d = resource_to_dict(inst)
+        assert isinstance(d, dict)
+        assert d["id"] == "reactor_01"
+        assert d["class"] == "virtual_stirrer"
+
+    def test_resource_to_dict_passthrough(self):
+        d = _make_resource_dict()
+        result = resource_to_dict(d)
+        assert result is d  # 同一个 dict
+
+
+# ============ vessel_parser 兼容性测试 ============
+
+
+class TestVesselParser:
+    """测试 vessel_parser.get_vessel 对 ResourceDictInstance 的兼容"""
+
+    def test_get_vessel_from_dict(self):
+        d = _make_resource_dict(id="reactor_01", data={"temperature": 25.0})
+        vessel_id, vessel_data = get_vessel(d)
+        assert vessel_id == "reactor_01"
+        assert vessel_data["temperature"] == 25.0
+
+    def test_get_vessel_from_string(self):
+        vessel_id, vessel_data = get_vessel("reactor_01")
+        assert vessel_id == "reactor_01"
+        assert vessel_data == {}
+
+    def test_get_vessel_from_resource_instance(self):
+        inst = _make_resource_instance(id="reactor_01", data={"temperature": 25.0})
+        vessel_id, vessel_data = get_vessel(inst)
+        assert vessel_id == "reactor_01"
+        assert vessel_data["temperature"] == 25.0
+
+    def test_get_vessel_from_wrapped_dict(self):
+        """兼容 {station_id: {id: ..., data: {...}}} 格式"""
+        d = {"StationA": {"id": "StationA", "data": {"vol": 100}}}
+        vessel_id, vessel_data = get_vessel(d)
+        assert vessel_id == "StationA"
+
+
+# ============ ResourceTreeSet → get_plr_nested_dict 测试 ============
+
+
+class TestResourceTreeRoundTrip:
+    """测试 ResourceTreeSet → get_plr_nested_dict 保留树结构和关键字段"""
+
+    def test_tree_preserves_children(self):
+        tree_set = _make_tree_with_children()
+        assert len(tree_set.trees) == 1
+        root = tree_set.trees[0].root_node
+        assert root.res_content.id == "StationA"
+        assert len(root.children) == 2
+
+    def test_plr_nested_dict_has_children(self):
+        tree_set = _make_tree_with_children()
+        root = tree_set.trees[0].root_node
+        nested = root.get_plr_nested_dict()
+        assert isinstance(nested, dict)
+        assert "children" in nested
+        assert isinstance(nested["children"], dict)
+        assert "R1" in nested["children"]
+        assert "R2" in nested["children"]
+
+    def test_plr_nested_dict_preserves_uuid(self):
+        tree_set = _make_tree_with_children()
+        root = tree_set.trees[0].root_node
+        nested = root.get_plr_nested_dict()
+        assert nested["uuid"] == "uuid-station-a"
+        assert nested["children"]["R1"]["uuid"] == "uuid-r1"
+
+    def test_plr_nested_dict_preserves_klass(self):
+        tree_set = _make_tree_with_children()
+        root = tree_set.trees[0].root_node
+        nested = root.get_plr_nested_dict()
+        assert nested["class"] == "workstation"
+
+    def test_plr_nested_dict_preserves_data(self):
+        tree_set = _make_tree_with_children()
+        root = tree_set.trees[0].root_node
+        nested = root.get_plr_nested_dict()
+        r1_data = nested["children"]["R1"]["data"]
+        assert "liquid" in r1_data
+        assert r1_data["liquid"][0]["volume"] == 10.0
+
+    def test_plr_nested_dict_usable_by_get_vessel(self):
+        """get_plr_nested_dict 的结果可以直接传给 get_vessel"""
+        tree_set = _make_tree_with_children()
+        root = tree_set.trees[0].root_node
+        nested = root.get_plr_nested_dict()
+        vessel_id, vessel_data = get_vessel(nested)
+        assert vessel_id == "StationA"
+
+    def test_dump_vs_plr_nested_dict(self):
+        """dump() 是扁平化的，get_plr_nested_dict 保留树结构"""
+        tree_set = _make_tree_with_children()
+        # dump 返回扁平列表
+        dumped = tree_set.dump()
+        assert isinstance(dumped[0], list)
+        assert len(dumped[0]) == 3  # StationA + R1 + R2，全部扁平
+
+        # get_plr_nested_dict 保留嵌套
+        root = tree_set.trees[0].root_node
+        nested = root.get_plr_nested_dict()
+        assert isinstance(nested["children"], dict)
+        assert len(nested["children"]) == 2  # 嵌套的 children
+
+
+# ============ 模拟 workstation 路径测试 ============
+
+
+class TestWorkstationPath:
+    """模拟 workstation.py 中的关键路径:
+    raw_data → ResourceTreeSet.from_raw_dict_list → get_plr_nested_dict → compiler
+    """
+
+    def test_single_resource_path(self):
+        """单个 Resource: 取第一棵树的根节点"""
+        raw_data = [
+            _make_resource_dict(id="reactor_01", uuid="uuid-r01", klass="virtual_stirrer"),
+        ]
+        tree_set = ResourceTreeSet.from_raw_dict_list(raw_data)
+        root = tree_set.trees[0].root_node
+        result = root.get_plr_nested_dict()
+        assert result["id"] == "reactor_01"
+        assert result["uuid"] == "uuid-r01"
+        assert result["class"] == "virtual_stirrer"
+
+    def test_resource_with_children_path(self):
+        """Resource 带 children: AGV/batch transfer 场景"""
+        tree_set = _make_tree_with_children()
+        root = tree_set.trees[0].root_node
+        nested = root.get_plr_nested_dict()
+
+        # 模拟编译器接收到的参数
+        from_repo = {"StationA": nested}
+        assert "A01" not in from_repo["StationA"]["children"]  # children 按 id 索引
+        assert "R1" in from_repo["StationA"]["children"]
+        assert from_repo["StationA"]["children"]["R1"]["uuid"] == "uuid-r1"
+
+    def test_multiple_resource_path(self):
+        """多个 Resource: 每棵树取根节点"""
+        raw_data1 = [_make_resource_dict(id="R1", uuid="uuid-r1")]
+        raw_data2 = [_make_resource_dict(id="R2", uuid="uuid-r2")]
+        # 模拟 host 返回多棵树
+        tree_set1 = ResourceTreeSet.from_raw_dict_list(raw_data1)
+        tree_set2 = ResourceTreeSet.from_raw_dict_list(raw_data2)
+        results = [
+            tree.root_node.get_plr_nested_dict()
+            for ts in [tree_set1, tree_set2]
+            for tree in ts.trees
+        ]
+        assert len(results) == 2
+        assert results[0]["id"] == "R1"
+        assert results[1]["id"] == "R2"

tests/devices/test_agv_transport_station.py

@@ -0,0 +1,137 @@
+"""
+AGVTransportStation driver 测试
+
+覆盖：初始化、carrier property、slot 查询、路由查询、capacity 计算。
+"""
+
+import pytest
+from unittest.mock import MagicMock, patch
+
+from unilabos.devices.transport.agv_workstation import AGVTransportStation
+from unilabos.resources.warehouse import WareHouse, warehouse_factory
+
+
+class TestAGVTransportStation:
+    def _make_driver(self, route_table=None, device_roles=None):
+        """创建一个 AGVTransportStation 实例"""
+        return AGVTransportStation(
+            deck=None,
+            route_table=route_table or {
+                "A->B": {"nav_command": '{"target":"LM1"}', "arm_pick": "pick.urp", "arm_place": "place.urp"}
+            },
+            device_roles=device_roles or {"navigator": "agv_nav", "arm": "agv_arm"},
+        )
+
+    def _make_warehouse(self, name="agv_platform", nx=2, ny=1, nz=1):
+        """创建一个测试用 Warehouse"""
+        return warehouse_factory(name=name, num_items_x=nx, num_items_y=ny, num_items_z=nz)
+
+    def test_init_deck_none(self):
+        """AGVTransportStation 初始化时 deck=None"""
+        driver = self._make_driver()
+        assert driver.deck is None
+
+    def test_init_route_table(self):
+        """路由表正确存储"""
+        driver = self._make_driver()
+        assert "A->B" in driver.route_table
+
+    def test_init_device_roles(self):
+        """设备角色正确存储"""
+        driver = self._make_driver()
+        assert driver.device_roles["navigator"] == "agv_nav"
+        assert driver.device_roles["arm"] == "agv_arm"
+
+    def test_carrier_without_ros_node(self):
+        """未 post_init 时 carrier 返回 None"""
+        driver = self._make_driver()
+        assert driver.carrier is None
+
+    def test_carrier_with_warehouse(self):
+        """post_init 后 carrier 返回正确的 WareHouse"""
+        driver = self._make_driver()
+        wh = self._make_warehouse()
+
+        # 模拟 ros_node 和 resource_tracker
+        mock_ros_node = MagicMock()
+        mock_ros_node.resource_tracker.resources = [wh]
+        mock_ros_node.device_id = "AGV"
+        driver.post_init(mock_ros_node)
+
+        assert driver.carrier is wh
+        assert isinstance(driver.carrier, WareHouse)
+
+    def test_capacity(self):
+        """容量计算正确"""
+        driver = self._make_driver()
+        wh = self._make_warehouse(nx=2, ny=1, nz=1)
+        mock_ros_node = MagicMock()
+        mock_ros_node.resource_tracker.resources = [wh]
+        mock_ros_node.device_id = "AGV"
+        driver.post_init(mock_ros_node)
+
+        assert driver.capacity == 2
+
+    def test_capacity_multi_layer(self):
+        """多层 Warehouse 容量"""
+        driver = self._make_driver()
+        wh = self._make_warehouse(nx=1, ny=2, nz=3)
+        mock_ros_node = MagicMock()
+        mock_ros_node.resource_tracker.resources = [wh]
+        mock_ros_node.device_id = "AGV"
+        driver.post_init(mock_ros_node)
+
+        assert driver.capacity == 6
+
+    def test_capacity_no_carrier(self):
+        """无 carrier 时容量为 0"""
+        driver = self._make_driver()
+        assert driver.capacity == 0
+
+    def test_free_slots(self):
+        """空载时所有 slot 为空闲"""
+        driver = self._make_driver()
+        wh = self._make_warehouse(nx=2, ny=1, nz=1)
+        mock_ros_node = MagicMock()
+        mock_ros_node.resource_tracker.resources = [wh]
+        mock_ros_node.device_id = "AGV"
+        driver.post_init(mock_ros_node)
+
+        free = driver.free_slots
+        assert len(free) == 2
+
+    def test_occupied_slots_empty(self):
+        """空载时 occupied_slots 为空"""
+        driver = self._make_driver()
+        wh = self._make_warehouse(nx=2, ny=1, nz=1)
+        mock_ros_node = MagicMock()
+        mock_ros_node.resource_tracker.resources = [wh]
+        mock_ros_node.device_id = "AGV"
+        driver.post_init(mock_ros_node)
+
+        assert len(driver.occupied_slots) == 0
+
+    def test_resolve_route(self):
+        """路由查询返回正确的指令"""
+        driver = self._make_driver()
+        route = driver.resolve_route("A", "B")
+        assert route["nav_command"] == '{"target":"LM1"}'
+        assert route["arm_pick"] == "pick.urp"
+
+    def test_resolve_route_not_found(self):
+        """查询不存在的路线时抛出 KeyError"""
+        driver = self._make_driver()
+        with pytest.raises(KeyError, match="路由表"):
+            driver.resolve_route("X", "Y")
+
+    def test_get_device_id(self):
+        """获取子设备 ID"""
+        driver = self._make_driver()
+        assert driver.get_device_id("navigator") == "agv_nav"
+        assert driver.get_device_id("arm") == "agv_arm"
+
+    def test_get_device_id_not_found(self):
+        """获取不存在的角色时抛出 KeyError"""
+        driver = self._make_driver()
+        with pytest.raises(KeyError, match="未配置设备角色"):
+            driver.get_device_id("gripper")

unilabos/app/main.py

@@ -233,7 +233,7 @@ def parse_args():
     parser.add_argument(
         "--addr",
         type=str,
-        default="https://leap-lab.bohrium.com/api/v1",
+        default="https://uni-lab.bohrium.com/api/v1",
         help="Laboratory backend address",
     )
     parser.add_argument(
@@ -438,10 +438,10 @@ def main():
     if args.addr != parser.get_default("addr"):
         if args.addr == "test":
             print_status("使用测试环境地址", "info")
-            HTTPConfig.remote_addr = "https://leap-lab.test.bohrium.com/api/v1"
+            HTTPConfig.remote_addr = "https://uni-lab.test.bohrium.com/api/v1"
         elif args.addr == "uat":
             print_status("使用uat环境地址", "info")
-            HTTPConfig.remote_addr = "https://leap-lab.uat.bohrium.com/api/v1"
+            HTTPConfig.remote_addr = "https://uni-lab.uat.bohrium.com/api/v1"
         elif args.addr == "local":
             print_status("使用本地环境地址", "info")
             HTTPConfig.remote_addr = "http://127.0.0.1:48197/api/v1"
@@ -553,8 +553,13 @@ def main():
         os._exit(0)
 
     if not BasicConfig.ak or not BasicConfig.sk:
-        print_status("后续运行必须拥有一个实验室，请前往 https://leap-lab.bohrium.com 注册实验室！", "warning")
-        os._exit(1)
+        if BasicConfig.test_mode:
+            print_status("测试模式：跳过 ak/sk 检查，使用占位凭据", "warning")
+            BasicConfig.ak = BasicConfig.ak or "test_ak"
+            BasicConfig.sk = BasicConfig.sk or "test_sk"
+        else:
+            print_status("后续运行必须拥有一个实验室，请前往 https://uni-lab.bohrium.com 注册实验室！", "warning")
+            os._exit(1)
     graph: nx.Graph
     resource_tree_set: ResourceTreeSet
     resource_links: List[Dict[str, Any]]
@@ -621,8 +626,6 @@ def main():
             continue
 
     # 如果从远端获取了物料信息，则与本地物料进行同步
-    # 仅在本地文件模式下有意义：本地文件只含设备结构，远端有已保存的物料，需要 merge
-    # 远端模式下 resource_tree_set 与 request_startup_json 来自同一份数据，merge 为空操作
     if file_path is not None and request_startup_json and "nodes" in request_startup_json:
         print_status("开始同步远端物料到本地...", "info")
         remote_tree_set = ResourceTreeSet.from_raw_dict_list(request_startup_json["nodes"])

unilabos/app/web/client.py

@@ -36,9 +36,6 @@ class HTTPClient:
             auth_secret = BasicConfig.auth_secret()
             self.auth = auth_secret
             info(f"正在使用ak sk作为授权信息：[{auth_secret}]")
-        # 复用 TCP/TLS 连接，避免每次请求重新握手
-        self._session = requests.Session()
-        self._session.headers.update({"Authorization": f"Lab {self.auth}"})
         info(f"HTTPClient 初始化完成: remote_addr={self.remote_addr}")
 
     def resource_edge_add(self, resources: List[Dict[str, Any]]) -> requests.Response:
@@ -51,7 +48,7 @@ class HTTPClient:
         Returns:
             Response: API响应对象
         """
-        response = self._session.post(
+        response = requests.post(
             f"{self.remote_addr}/edge/material/edge",
             json={
                 "edges": resources,
@@ -78,28 +75,25 @@ class HTTPClient:
         Returns:
             Dict[str, str]: 旧UUID到新UUID的映射关系 {old_uuid: new_uuid}
         """
-        # dump() 只调用一次，复用给文件保存和 HTTP 请求
-        nodes_info = [x for xs in resources.dump() for x in xs]
+        with open(os.path.join(BasicConfig.working_dir, "req_resource_tree_add.json"), "w", encoding="utf-8") as f:
+            payload = {"nodes": [x for xs in resources.dump() for x in xs], "mount_uuid": mount_uuid}
+            f.write(json.dumps(payload, indent=4))
+        # 从序列化数据中提取所有节点的UUID（保存旧UUID）
         old_uuids = {n.res_content.uuid: n for n in resources.all_nodes}
-        payload = {"nodes": nodes_info, "mount_uuid": mount_uuid}
-        body_bytes = _fast_dumps(payload)
-        with open(os.path.join(BasicConfig.working_dir, "req_resource_tree_add.json"), "wb") as f:
-            f.write(_fast_dumps_pretty(payload))
-        http_headers = {"Content-Type": "application/json"}
         if not self.initialized or first_add:
             self.initialized = True
             info(f"首次添加资源，当前远程地址: {self.remote_addr}")
-            response = self._session.post(
+            response = requests.post(
                 f"{self.remote_addr}/edge/material",
-                data=body_bytes,
-                headers=http_headers,
+                json={"nodes": [x for xs in resources.dump() for x in xs], "mount_uuid": mount_uuid},
+                headers={"Authorization": f"Lab {self.auth}"},
                 timeout=60,
             )
         else:
-            response = self._session.put(
+            response = requests.put(
                 f"{self.remote_addr}/edge/material",
-                data=body_bytes,
-                headers=http_headers,
+                json={"nodes": [x for xs in resources.dump() for x in xs], "mount_uuid": mount_uuid},
+                headers={"Authorization": f"Lab {self.auth}"},
                 timeout=10,
             )
 
@@ -117,7 +111,6 @@ class HTTPClient:
                     uuid_mapping[i["uuid"]] = i["cloud_uuid"]
         else:
             logger.error(f"添加物料失败: {response.text}")
-            logger.trace(f"添加物料失败: {nodes_info}")
         for u, n in old_uuids.items():
             if u in uuid_mapping:
                 n.res_content.uuid = uuid_mapping[u]
@@ -138,7 +131,7 @@ class HTTPClient:
         """
         with open(os.path.join(BasicConfig.working_dir, "req_resource_tree_get.json"), "w", encoding="utf-8") as f:
             f.write(json.dumps({"uuids": uuid_list, "with_children": with_children}, indent=4))
-        response = self._session.post(
+        response = requests.post(
             f"{self.remote_addr}/edge/material/query",
             json={"uuids": uuid_list, "with_children": with_children},
             headers={"Authorization": f"Lab {self.auth}"},
@@ -152,7 +145,6 @@ class HTTPClient:
                 logger.error(f"查询物料失败: {response.text}")
             else:
                 data = res["data"]["nodes"]
-                logger.trace(f"resource_tree_get查询到物料: {data}")
                 return data
         else:
             logger.error(f"查询物料失败: {response.text}")
@@ -170,14 +162,14 @@ class HTTPClient:
         if not self.initialized:
             self.initialized = True
             info(f"首次添加资源，当前远程地址: {self.remote_addr}")
-            response = self._session.post(
+            response = requests.post(
                 f"{self.remote_addr}/lab/material",
                 json={"nodes": resources},
                 headers={"Authorization": f"Lab {self.auth}"},
                 timeout=100,
             )
         else:
-            response = self._session.put(
+            response = requests.put(
                 f"{self.remote_addr}/lab/material",
                 json={"nodes": resources},
                 headers={"Authorization": f"Lab {self.auth}"},
@@ -204,7 +196,7 @@ class HTTPClient:
         """
         with open(os.path.join(BasicConfig.working_dir, "req_resource_get.json"), "w", encoding="utf-8") as f:
             f.write(json.dumps({"id": id, "with_children": with_children}, indent=4))
-        response = self._session.get(
+        response = requests.get(
             f"{self.remote_addr}/lab/material",
             params={"id": id, "with_children": with_children},
             headers={"Authorization": f"Lab {self.auth}"},
@@ -245,14 +237,14 @@ class HTTPClient:
         if not self.initialized:
             self.initialized = True
             info(f"首次添加资源，当前远程地址: {self.remote_addr}")
-            response = self._session.post(
+            response = requests.post(
                 f"{self.remote_addr}/lab/material",
                 json={"nodes": resources},
                 headers={"Authorization": f"Lab {self.auth}"},
                 timeout=100,
             )
         else:
-            response = self._session.put(
+            response = requests.put(
                 f"{self.remote_addr}/lab/material",
                 json={"nodes": resources},
                 headers={"Authorization": f"Lab {self.auth}"},
@@ -282,7 +274,7 @@ class HTTPClient:
         with open(file_path, "rb") as file:
             files = {"files": file}
             logger.info(f"上传文件: {file_path} 到 {scene}")
-            response = self._session.post(
+            response = requests.post(
                 f"{self.remote_addr}/api/account/file_upload/{scene}",
                 files=files,
                 headers={"Authorization": f"Lab {self.auth}"},
@@ -322,7 +314,7 @@ class HTTPClient:
             "Content-Type": "application/json",
             "Content-Encoding": "gzip",
         }
-        response = self._session.post(
+        response = requests.post(
             f"{self.remote_addr}/lab/resource",
             data=compressed_body,
             headers=headers,
@@ -356,7 +348,7 @@ class HTTPClient:
         Returns:
             Response: API响应对象
         """
-        response = self._session.get(
+        response = requests.get(
             f"{self.remote_addr}/edge/material/download",
             headers={"Authorization": f"Lab {self.auth}"},
             timeout=(3, 30),
@@ -417,7 +409,7 @@ class HTTPClient:
         with open(os.path.join(BasicConfig.working_dir, "req_workflow_upload.json"), "w", encoding="utf-8") as f:
             f.write(json.dumps(payload, indent=4, ensure_ascii=False))
 
-        response = self._session.post(
+        response = requests.post(
             f"{self.remote_addr}/lab/workflow/owner/import",
             json=payload,
             headers={"Authorization": f"Lab {self.auth}"},

unilabos/app/ws_client.py

@@ -1113,7 +1113,7 @@ class MessageProcessor:
                 "task_id": task_id,
                 "job_id": job_id,
                 "free": free,
-                "need_more": need_more + 1,
+                "need_more": need_more,
             },
         }
 
@@ -1253,7 +1253,7 @@ class QueueProcessor:
                     "task_id": job_info.task_id,
                     "job_id": job_info.job_id,
                     "free": False,
-                    "need_more": 10 + 1,
+                    "need_more": 10,
                 },
             }
             self.message_processor.send_message(message)
@@ -1269,13 +1269,7 @@ class QueueProcessor:
         if not queued_jobs:
             return
 
-        queue_summary = {}
-        for j in queued_jobs:
-            key = f"{j.device_id}/{j.action_name}"
-            queue_summary[key] = queue_summary.get(key, 0) + 1
-        logger.debug(
-            f"[QueueProcessor] Sending busy status for {len(queued_jobs)} queued jobs: {queue_summary}"
-        )
+        logger.debug(f"[QueueProcessor] Sending busy status for {len(queued_jobs)} queued jobs")
 
         for job_info in queued_jobs:
             # 快照可能已过期：在遍历过程中 end_job() 可能已将此 job 移至 READY，
@@ -1292,7 +1286,7 @@ class QueueProcessor:
                     "task_id": job_info.task_id,
                     "job_id": job_info.job_id,
                     "free": False,
-                    "need_more": 10 + 1,
+                    "need_more": 10,
                 },
             }
             success = self.message_processor.send_message(message)
@@ -1375,10 +1369,6 @@ class WebSocketClient(BaseCommunicationClient):
         self.message_processor = MessageProcessor(self.websocket_url, self.send_queue, self.device_manager)
         self.queue_processor = QueueProcessor(self.device_manager, self.message_processor)
 
-        # running状态debounce缓存: {job_id: (last_send_timestamp, last_feedback_data)}
-        self._job_running_last_sent: Dict[str, tuple] = {}
-        self._job_running_debounce_interval: float = 10.0  # 秒
-
         # 设置相互引用
         self.message_processor.set_queue_processor(self.queue_processor)
         self.message_processor.set_websocket_client(self)
@@ -1478,32 +1468,22 @@ class WebSocketClient(BaseCommunicationClient):
             logger.debug(f"[WebSocketClient] Not connected, cannot publish job status for job_id: {item.job_id}")
             return
 
-        job_log = format_job_log(item.job_id, item.task_id, item.device_id, item.action_name)
-
         # 拦截最终结果状态，与原版本逻辑一致
         if status in ["success", "failed"]:
-            self._job_running_last_sent.pop(item.job_id, None)
-
             host_node = HostNode.get_instance(0)
             if host_node:
+                # 从HostNode的device_action_status中移除job_id
                 try:
                     host_node._device_action_status[item.device_action_key].job_ids.pop(item.job_id, None)
                 except (KeyError, AttributeError):
                     logger.warning(f"[WebSocketClient] Failed to remove job {item.job_id} from HostNode status")
 
+            # logger.debug(f"[WebSocketClient] Intercepting final status for job_id: {item.job_id} - {status}")
+
+            # 通知队列处理器job完成（包括timeout的job）
             self.queue_processor.handle_job_completed(item.job_id, status)
 
-        # running状态按job_id做debounce，内容变化时仍然上报
-        if status == "running":
-            now = time.time()
-            cached = self._job_running_last_sent.get(item.job_id)
-            if cached is not None:
-                last_ts, last_data = cached
-                if now - last_ts < self._job_running_debounce_interval and last_data == feedback_data:
-                    logger.trace(f"[WebSocketClient] Job status debounced (skip): {job_log} - {status}")
-                    return
-            self._job_running_last_sent[item.job_id] = (now, feedback_data)
-
+        # 发送job状态消息
         message = {
             "action": "job_status",
             "data": {
@@ -1519,6 +1499,7 @@ class WebSocketClient(BaseCommunicationClient):
         }
         self.message_processor.send_message(message)
 
+        job_log = format_job_log(item.job_id, item.task_id, item.device_id, item.action_name)
         logger.trace(f"[WebSocketClient] Job status published: {job_log} - {status}")
 
     def send_ping(self, ping_id: str, timestamp: float) -> None:

unilabos/compile/__init__.py

@@ -5,6 +5,7 @@ from .separate_protocol import generate_separate_protocol
 from .evaporate_protocol import generate_evaporate_protocol
 from .evacuateandrefill_protocol import generate_evacuateandrefill_protocol
 from .agv_transfer_protocol import generate_agv_transfer_protocol
+from .batch_transfer_protocol import generate_batch_transfer_protocol
 from .add_protocol import generate_add_protocol
 from .centrifuge_protocol import generate_centrifuge_protocol
 from .filter_protocol import generate_filter_protocol
@@ -31,6 +32,7 @@ from .hydrogenate_protocol import generate_hydrogenate_protocol
 action_protocol_generators = {
     AddProtocol: generate_add_protocol,
     AGVTransferProtocol: generate_agv_transfer_protocol,
+    BatchTransferProtocol: generate_batch_transfer_protocol,
     AdjustPHProtocol: generate_adjust_ph_protocol,
     CentrifugeProtocol: generate_centrifuge_protocol,
     CleanProtocol: generate_clean_protocol,

unilabos/compile/_agv_utils.py

@@ -0,0 +1,127 @@
+"""
+AGV 编译器共用工具函数
+
+从 physical_setup_graph 中发现 AGV 节点配置，
+供 agv_transfer_protocol 和 batch_transfer_protocol 复用。
+"""
+
+from typing import Any, Dict, List, Optional
+
+import networkx as nx
+
+
+def find_agv_config(G: nx.Graph, agv_id: Optional[str] = None) -> Dict[str, Any]:
+    """从设备图中发现 AGV 节点，返回其配置
+
+    查找策略：
+    1. 如果指定 agv_id，直接读取该节点
+    2. 否则查找 class 为 "agv_transport_station" 的节点
+    3. 兜底查找 config 中包含 device_roles 的 workstation 节点
+
+    Returns:
+        {
+            "agv_id": str,
+            "device_roles": {"navigator": "...", "arm": "..."},
+            "route_table": {"A->B": {"nav_command": ..., "arm_pick": ..., "arm_place": ...}},
+            "capacity": int,
+        }
+    """
+    if agv_id and agv_id in G.nodes:
+        node_data = G.nodes[agv_id]
+        config = _extract_config(node_data)
+        if config and "device_roles" in config:
+            return _build_agv_cfg(agv_id, config, G)
+
+    # 查找 agv_transport_station 类型
+    for nid, ndata in G.nodes(data=True):
+        node_class = _get_node_class(ndata)
+        if node_class == "agv_transport_station":
+            config = _extract_config(ndata)
+            return _build_agv_cfg(nid, config or {}, G)
+
+    # 兜底：查找带有 device_roles 的 workstation
+    for nid, ndata in G.nodes(data=True):
+        node_class = _get_node_class(ndata)
+        if node_class == "workstation":
+            config = _extract_config(ndata)
+            if config and "device_roles" in config:
+                return _build_agv_cfg(nid, config, G)
+
+    raise ValueError("设备图中未找到 AGV 节点（需 class=agv_transport_station 或 config.device_roles）")
+
+
+def get_agv_capacity(G: nx.Graph, agv_id: str) -> int:
+    """从 AGV 的 Warehouse 子节点计算载具容量"""
+    for neighbor in G.successors(agv_id) if G.is_directed() else G.neighbors(agv_id):
+        ndata = G.nodes[neighbor]
+        node_type = _get_node_type(ndata)
+        if node_type == "warehouse":
+            config = _extract_config(ndata)
+            if config:
+                x = config.get("num_items_x", 1)
+                y = config.get("num_items_y", 1)
+                z = config.get("num_items_z", 1)
+                return x * y * z
+    # 如果没有 warehouse 子节点，尝试从配置中读取
+    return 0
+
+
+def split_batches(items: list, capacity: int) -> List[list]:
+    """按 AGV 容量分批
+
+    Args:
+        items: 待转运的物料列表
+        capacity: AGV 单批次容量
+
+    Returns:
+        分批后的列表的列表
+    """
+    if capacity <= 0:
+        raise ValueError(f"AGV 容量必须 > 0，当前: {capacity}")
+    return [items[i:i + capacity] for i in range(0, len(items), capacity)]
+
+
+def _extract_config(node_data: dict) -> Optional[dict]:
+    """从节点数据中提取 config 字段，兼容多种格式"""
+    # 直接 config 字段
+    config = node_data.get("config")
+    if isinstance(config, dict):
+        return config
+    # res_content 嵌套格式
+    res_content = node_data.get("res_content")
+    if hasattr(res_content, "config"):
+        return res_content.config if isinstance(res_content.config, dict) else None
+    if isinstance(res_content, dict):
+        return res_content.get("config")
+    return None
+
+
+def _get_node_class(node_data: dict) -> str:
+    """获取节点的 class 字段"""
+    res_content = node_data.get("res_content")
+    if hasattr(res_content, "model_dump"):
+        d = res_content.model_dump()
+        return d.get("class_", d.get("class", ""))
+    if isinstance(res_content, dict):
+        return res_content.get("class_", res_content.get("class", ""))
+    return node_data.get("class_", node_data.get("class", ""))
+
+
+def _get_node_type(node_data: dict) -> str:
+    """获取节点的 type 字段"""
+    res_content = node_data.get("res_content")
+    if hasattr(res_content, "type"):
+        return res_content.type or ""
+    if isinstance(res_content, dict):
+        return res_content.get("type", "")
+    return node_data.get("type", "")
+
+
+def _build_agv_cfg(agv_id: str, config: dict, G: nx.Graph) -> Dict[str, Any]:
+    """构建标准化的 AGV 配置"""
+    return {
+        "agv_id": agv_id,
+        "device_roles": config.get("device_roles", {}),
+        "route_table": config.get("route_table", {}),
+        "capacity": get_agv_capacity(G, agv_id),
+    }

unilabos/compile/add_protocol.py

@@ -2,20 +2,13 @@ from functools import partial
 
 import networkx as nx
 import re
-import logging
 from typing import List, Dict, Any, Union
 
 from .utils.unit_parser import parse_volume_input, parse_mass_input, parse_time_input
 from .utils.vessel_parser import get_vessel, find_solid_dispenser, find_connected_stirrer, find_reagent_vessel
-from .utils.logger_util import action_log
+from .utils.logger_util import action_log, debug_print
 from .pump_protocol import generate_pump_protocol_with_rinsing
 
-logger = logging.getLogger(__name__)
-
-def debug_print(message):
-    """调试输出"""
-    logger.info(f"[ADD] {message}")
-
 
 # 🆕 创建进度日志动作
 create_action_log = partial(action_log, prefix="[ADD]")

unilabos/compile/adjustph_protocol.py

@@ -1,14 +1,12 @@
+from functools import partial
+
 import networkx as nx
-import logging
 from typing import List, Dict, Any, Union
-from .utils.vessel_parser import get_vessel
+from .utils.vessel_parser import get_vessel, find_connected_stirrer
+from .utils.logger_util import action_log, debug_print
 from .pump_protocol import generate_pump_protocol_with_rinsing
 
-logger = logging.getLogger(__name__)
-
-def debug_print(message):
-    """调试输出"""
-    logger.info(f"[ADJUST_PH] {message}")
+create_action_log = partial(action_log, prefix="[ADJUST_PH]")
 
 def find_acid_base_vessel(G: nx.DiGraph, reagent: str) -> str:
     """
@@ -21,8 +19,6 @@ def find_acid_base_vessel(G: nx.DiGraph, reagent: str) -> str:
     Returns:
         str: 试剂容器ID
     """
-    debug_print(f"🔍 正在查找试剂 '{reagent}' 的容器...")
-    
     # 常见酸碱试剂的别名映射
     reagent_aliases = {
         "hydrochloric acid": ["HCl", "hydrochloric_acid", "hcl", "muriatic_acid"],
@@ -36,17 +32,13 @@ def find_acid_base_vessel(G: nx.DiGraph, reagent: str) -> str:
     
     # 构建搜索名称列表
     search_names = [reagent.lower()]
-    debug_print(f"📋 基础搜索名称: {reagent.lower()}")
-    
+
     # 添加别名
     for base_name, aliases in reagent_aliases.items():
         if reagent.lower() in base_name.lower() or base_name.lower() in reagent.lower():
             search_names.extend([alias.lower() for alias in aliases])
-            debug_print(f"🔗 添加别名: {aliases}")
             break
     
-    debug_print(f"📝 完整搜索列表: {search_names}")
-    
     # 构建可能的容器名称
     possible_names = []
     for name in search_names:
@@ -61,17 +53,15 @@ def find_acid_base_vessel(G: nx.DiGraph, reagent: str) -> str:
             name_clean
         ])
     
-    debug_print(f"🎯 可能的容器名称 (前5个): {possible_names[:5]}... (共{len(possible_names)}个)")
-    
+    debug_print(f"搜索容器: {len(possible_names)} 个候选名称")
+
     # 第一步：通过容器名称匹配
-    debug_print(f"📋 方法1: 精确名称匹配...")
     for vessel_name in possible_names:
         if vessel_name in G.nodes():
-            debug_print(f"✅ 通过名称匹配找到容器: {vessel_name} 🎯")
+            debug_print(f"通过名称匹配找到容器: {vessel_name}")
             return vessel_name
-    
+
     # 第二步：通过模糊匹配
-    debug_print(f"📋 方法2: 模糊名称匹配...")
     for node_id in G.nodes():
         if G.nodes[node_id].get('type') == 'container':
             node_name = G.nodes[node_id].get('name', '').lower()
@@ -79,11 +69,10 @@ def find_acid_base_vessel(G: nx.DiGraph, reagent: str) -> str:
             # 检查是否包含任何搜索名称
             for search_name in search_names:
                 if search_name in node_id.lower() or search_name in node_name:
-                    debug_print(f"✅ 通过模糊匹配找到容器: {node_id} 🔍")
+                    debug_print(f"通过模糊匹配找到容器: {node_id}")
                     return node_id
-    
+
     # 第三步：通过液体类型匹配
-    debug_print(f"📋 方法3: 液体类型匹配...")
     for node_id in G.nodes():
         if G.nodes[node_id].get('type') == 'container':
             vessel_data = G.nodes[node_id].get('data', {})
@@ -96,56 +85,15 @@ def find_acid_base_vessel(G: nx.DiGraph, reagent: str) -> str:
                     
                     for search_name in search_names:
                         if search_name in liquid_type or search_name in reagent_name:
-                            debug_print(f"✅ 通过液体类型匹配找到容器: {node_id} 💧")
+                            debug_print(f"通过液体类型匹配找到容器: {node_id}")
                             return node_id
     
     # 列出可用容器帮助调试
-    debug_print(f"📊 列出可用容器帮助调试...")
-    available_containers = []
-    for node_id in G.nodes():
-        if G.nodes[node_id].get('type') == 'container':
-            vessel_data = G.nodes[node_id].get('data', {})
-            liquids = vessel_data.get('liquid', [])
-            liquid_types = [liquid.get('liquid_type', '') or liquid.get('name', '') 
-                           for liquid in liquids if isinstance(liquid, dict)]
-            
-            available_containers.append({
-                'id': node_id,
-                'name': G.nodes[node_id].get('name', ''),
-                'liquids': liquid_types,
-                'reagent_name': vessel_data.get('reagent_name', '')
-            })
-    
-    debug_print(f"📋 可用容器列表:")
-    for container in available_containers:
-        debug_print(f"  - 🧪 {container['id']}: {container['name']}")
-        debug_print(f"    💧 液体: {container['liquids']}")
-        debug_print(f"    🏷️ 试剂: {container['reagent_name']}")
-    
-    debug_print(f"❌ 所有匹配方法都失败了")
+    available_containers = [node_id for node_id in G.nodes()
+                           if G.nodes[node_id].get('type') == 'container']
+    debug_print(f"所有匹配方法失败，可用容器: {available_containers}")
     raise ValueError(f"找不到试剂 '{reagent}' 对应的容器。尝试了: {possible_names[:10]}...")
 
-def find_connected_stirrer(G: nx.DiGraph, vessel: str) -> str:
-    """查找与容器相连的搅拌器"""
-    debug_print(f"🔍 查找连接到容器 '{vessel}' 的搅拌器...")
-    
-    stirrer_nodes = [node for node in G.nodes() 
-                    if (G.nodes[node].get('class') or '') == 'virtual_stirrer']
-    
-    debug_print(f"📊 发现 {len(stirrer_nodes)} 个搅拌器: {stirrer_nodes}")
-    
-    for stirrer in stirrer_nodes:
-        if G.has_edge(stirrer, vessel) or G.has_edge(vessel, stirrer):
-            debug_print(f"✅ 找到连接的搅拌器: {stirrer} 🔗")
-            return stirrer
-    
-    if stirrer_nodes:
-        debug_print(f"⚠️ 未找到直接连接的搅拌器，使用第一个: {stirrer_nodes[0]} 🔄")
-        return stirrer_nodes[0]
-    
-    debug_print(f"❌ 未找到任何搅拌器")
-    return None
-
 def calculate_reagent_volume(target_ph_value: float, reagent: str, vessel_volume: float = 100.0) -> float:
     """
     估算需要的试剂体积来调节pH
@@ -158,44 +106,30 @@ def calculate_reagent_volume(target_ph_value: float, reagent: str, vessel_volume
     Returns:
         float: 估算的试剂体积 (mL)
     """
-    debug_print(f"🧮 计算试剂体积...")
-    debug_print(f"  📍 目标pH: {target_ph_value}")
-    debug_print(f"  🧪 试剂: {reagent}")
-    debug_print(f"  📏 容器体积: {vessel_volume}mL")
-    
-    # 简化的pH调节体积估算（实际应用中需要更精确的计算）
+    debug_print(f"计算试剂体积: pH={target_ph_value}, reagent={reagent}, vessel={vessel_volume}mL")
+
+    # 简化的pH调节体积估算
     if "acid" in reagent.lower() or "hcl" in reagent.lower():
-        debug_print(f"🍋 检测到酸性试剂")
-        # 酸性试剂：pH越低需要的体积越大
         if target_ph_value < 3:
-            volume = vessel_volume * 0.05  # 5%
-            debug_print(f"  💪 强酸性 (pH<3): 使用 5% 体积")
+            volume = vessel_volume * 0.05
         elif target_ph_value < 5:
-            volume = vessel_volume * 0.02  # 2%
-            debug_print(f"  🔸 中酸性 (pH<5): 使用 2% 体积")
+            volume = vessel_volume * 0.02
         else:
-            volume = vessel_volume * 0.01  # 1%
-            debug_print(f"  🔹 弱酸性 (pH≥5): 使用 1% 体积")
-    
+            volume = vessel_volume * 0.01
+
     elif "hydroxide" in reagent.lower() or "naoh" in reagent.lower():
-        debug_print(f"🧂 检测到碱性试剂")
-        # 碱性试剂：pH越高需要的体积越大
         if target_ph_value > 11:
-            volume = vessel_volume * 0.05  # 5%
-            debug_print(f"  💪 强碱性 (pH>11): 使用 5% 体积")
+            volume = vessel_volume * 0.05
         elif target_ph_value > 9:
-            volume = vessel_volume * 0.02  # 2%
-            debug_print(f"  🔸 中碱性 (pH>9): 使用 2% 体积")
+            volume = vessel_volume * 0.02
         else:
-            volume = vessel_volume * 0.01  # 1%
-            debug_print(f"  🔹 弱碱性 (pH≤9): 使用 1% 体积")
-    
+            volume = vessel_volume * 0.01
+
     else:
         # 未知试剂，使用默认值
         volume = vessel_volume * 0.01
-        debug_print(f"❓ 未知试剂类型，使用默认 1% 体积")
-    
-    debug_print(f"📊 计算结果: {volume:.2f}mL")
+
+    debug_print(f"估算试剂体积: {volume:.2f}mL")
     return volume
 
 def generate_adjust_ph_protocol(
@@ -220,96 +154,67 @@ def generate_adjust_ph_protocol(
     """
     
     vessel_id, vessel_data = get_vessel(vessel)
-    
+
     if not vessel_id:
-        debug_print(f"❌ vessel 参数无效，必须包含id字段或直接提供容器ID. vessel: {vessel}")
         raise ValueError("vessel 参数无效，必须包含id字段或直接提供容器ID")
-    
-    debug_print("=" * 60)
-    debug_print("🧪 开始生成pH调节协议")
-    debug_print(f"📋 原始参数:")
-    debug_print(f"  🥼 vessel: {vessel} (ID: {vessel_id})")
-    debug_print(f"  📊 ph_value: {ph_value}")
-    debug_print(f"  🧪 reagent: '{reagent}'")
-    debug_print(f"  📦 kwargs: {kwargs}")
-    debug_print("=" * 60)
-    
+
+    debug_print(f"pH调节协议: vessel={vessel_id}, ph={ph_value}, reagent='{reagent}'")
+
     action_sequence = []
-    
-    # 从kwargs中获取可选参数，如果没有则使用默认值
-    volume = kwargs.get('volume', 0.0)           # 自动估算体积
-    stir = kwargs.get('stir', True)              # 默认搅拌
-    stir_speed = kwargs.get('stir_speed', 300.0) # 默认搅拌速度
-    stir_time = kwargs.get('stir_time', 60.0)    # 默认搅拌时间
-    settling_time = kwargs.get('settling_time', 30.0)  # 默认平衡时间
-    
-    debug_print(f"🔧 处理后的参数:")
-    debug_print(f"  📏 volume: {volume}mL (0.0表示自动估算)")
-    debug_print(f"  🌪️ stir: {stir}")
-    debug_print(f"  🔄 stir_speed: {stir_speed}rpm")
-    debug_print(f"  ⏱️ stir_time: {stir_time}s")
-    debug_print(f"  ⏳ settling_time: {settling_time}s")
-    
+
+    # 从kwargs中获取可选参数
+    volume = kwargs.get('volume', 0.0)
+    stir = kwargs.get('stir', True)
+    stir_speed = kwargs.get('stir_speed', 300.0)
+    stir_time = kwargs.get('stir_time', 60.0)
+    settling_time = kwargs.get('settling_time', 30.0)
+
     # 开始处理
     action_sequence.append(create_action_log(f"开始调节pH至 {ph_value}", "🧪"))
     action_sequence.append(create_action_log(f"目标容器: {vessel_id}", "🥼"))
     action_sequence.append(create_action_log(f"使用试剂: {reagent}", "⚗️"))
-    
+
     # 1. 验证目标容器存在
-    debug_print(f"🔍 步骤1: 验证目标容器...")
     if vessel_id not in G.nodes():
-        debug_print(f"❌ 目标容器 '{vessel_id}' 不存在于系统中")
         raise ValueError(f"目标容器 '{vessel_id}' 不存在于系统中")
-    
-    debug_print(f"✅ 目标容器验证通过")
+
     action_sequence.append(create_action_log("目标容器验证通过", "✅"))
-    
+
     # 2. 查找酸碱试剂容器
-    debug_print(f"🔍 步骤2: 查找试剂容器...")
     action_sequence.append(create_action_log("正在查找试剂容器...", "🔍"))
     
     try:
         reagent_vessel = find_acid_base_vessel(G, reagent)
-        debug_print(f"✅ 找到试剂容器: {reagent_vessel}")
         action_sequence.append(create_action_log(f"找到试剂容器: {reagent_vessel}", "🧪"))
     except ValueError as e:
-        debug_print(f"❌ 无法找到试剂容器: {str(e)}")
         action_sequence.append(create_action_log(f"试剂容器查找失败: {str(e)}", "❌"))
         raise ValueError(f"无法找到试剂 '{reagent}': {str(e)}")
-    
+
     # 3. 体积估算
-    debug_print(f"🔍 步骤3: 体积处理...")
     if volume <= 0:
         action_sequence.append(create_action_log("开始自动估算试剂体积", "🧮"))
         
         # 获取目标容器的体积信息
         vessel_data = G.nodes[vessel_id].get('data', {})
-        vessel_volume = vessel_data.get('max_volume', 100.0)  # 默认100mL
-        debug_print(f"📏 容器最大体积: {vessel_volume}mL")
-        
+        vessel_volume = vessel_data.get('max_volume', 100.0)
+
         estimated_volume = calculate_reagent_volume(ph_value, reagent, vessel_volume)
         volume = estimated_volume
-        debug_print(f"✅ 自动估算试剂体积: {volume:.2f} mL")
         action_sequence.append(create_action_log(f"估算试剂体积: {volume:.2f}mL", "📊"))
     else:
-        debug_print(f"📏 使用指定体积: {volume}mL")
         action_sequence.append(create_action_log(f"使用指定体积: {volume}mL", "📏"))
-    
+
     # 4. 验证路径存在
-    debug_print(f"🔍 步骤4: 路径验证...")
     action_sequence.append(create_action_log("验证转移路径...", "🛤️"))
     
     try:
         path = nx.shortest_path(G, source=reagent_vessel, target=vessel_id)
-        debug_print(f"✅ 找到路径: {' → '.join(path)}")
-        action_sequence.append(create_action_log(f"找到转移路径: {' → '.join(path)}", "🛤️"))
+        action_sequence.append(create_action_log(f"找到转移路径: {' -> '.join(path)}", "🛤️"))
     except nx.NetworkXNoPath:
-        debug_print(f"❌ 无法找到转移路径")
         action_sequence.append(create_action_log("转移路径不存在", "❌"))
         raise ValueError(f"从试剂容器 '{reagent_vessel}' 到目标容器 '{vessel_id}' 没有可用路径")
-    
+
     # 5. 搅拌器设置
-    debug_print(f"🔍 步骤5: 搅拌器设置...")
     stirrer_id = None
     if stir:
         action_sequence.append(create_action_log("准备启动搅拌器", "🌪️"))
@@ -318,7 +223,6 @@ def generate_adjust_ph_protocol(
             stirrer_id = find_connected_stirrer(G, vessel_id)
             
             if stirrer_id:
-                debug_print(f"✅ 找到搅拌器 {stirrer_id}，启动搅拌")
                 action_sequence.append(create_action_log(f"启动搅拌器 {stirrer_id} (速度: {stir_speed}rpm)", "🔄"))
                 
                 action_sequence.append({
@@ -338,23 +242,18 @@ def generate_adjust_ph_protocol(
                     "action_kwargs": {"time": 5}
                 })
             else:
-                debug_print(f"⚠️ 未找到搅拌器，继续执行")
                 action_sequence.append(create_action_log("未找到搅拌器，跳过搅拌", "⚠️"))
-        
+
         except Exception as e:
-            debug_print(f"❌ 搅拌器配置出错: {str(e)}")
             action_sequence.append(create_action_log(f"搅拌器配置失败: {str(e)}", "❌"))
     else:
-        debug_print(f"📋 跳过搅拌设置")
         action_sequence.append(create_action_log("跳过搅拌设置", "⏭️"))
-    
+
     # 6. 试剂添加
-    debug_print(f"🔍 步骤6: 试剂添加...")
     action_sequence.append(create_action_log(f"开始添加试剂 {volume:.2f}mL", "🚰"))
     
     # 计算添加时间（pH调节需要缓慢添加）
-    addition_time = max(30.0, volume * 2.0)  # 至少30秒，每mL需要2秒
-    debug_print(f"⏱️ 计算添加时间: {addition_time}s (缓慢注入)")
+    addition_time = max(30.0, volume * 2.0)
     action_sequence.append(create_action_log(f"设置添加时间: {addition_time:.0f}s (缓慢注入)", "⏱️"))
     
     try:
@@ -377,35 +276,28 @@ def generate_adjust_ph_protocol(
         )
         
         action_sequence.extend(pump_actions)
-        debug_print(f"✅ 泵协议生成完成，添加了 {len(pump_actions)} 个动作")
         action_sequence.append(create_action_log(f"试剂转移完成 ({len(pump_actions)} 个操作)", "✅"))
-        
-        # 🔧 修复体积运算 - 试剂添加成功后更新容器液体体积
-        debug_print(f"🔧 更新容器液体体积...")
+
+        # 体积运算 - 试剂添加成功后更新容器液体体积
         if "data" in vessel and "liquid_volume" in vessel["data"]:
             current_volume = vessel["data"]["liquid_volume"]
-            debug_print(f"📊 添加前容器体积: {current_volume}")
-            
+
             # 处理不同的体积数据格式
             if isinstance(current_volume, list):
                 if len(current_volume) > 0:
                     # 增加体积（添加试剂）
                     vessel["data"]["liquid_volume"][0] += volume
-                    debug_print(f"📊 添加后容器体积: {vessel['data']['liquid_volume'][0]:.2f}mL (+{volume:.2f}mL)")
                 else:
                     # 如果列表为空，创建新的体积记录
                     vessel["data"]["liquid_volume"] = [volume]
-                    debug_print(f"📊 初始化容器体积: {volume:.2f}mL")
             elif isinstance(current_volume, (int, float)):
                 # 直接数值类型
                 vessel["data"]["liquid_volume"] += volume
-                debug_print(f"📊 添加后容器体积: {vessel['data']['liquid_volume']:.2f}mL (+{volume:.2f}mL)")
             else:
-                debug_print(f"⚠️ 未知的体积数据格式: {type(current_volume)}")
+                debug_print(f"未知的体积数据格式: {type(current_volume)}")
                 # 创建新的体积记录
                 vessel["data"]["liquid_volume"] = volume
         else:
-            debug_print(f"📊 容器无液体体积数据，创建新记录: {volume:.2f}mL")
             # 确保vessel有data字段
             if "data" not in vessel:
                 vessel["data"] = {}
@@ -423,19 +315,16 @@ def generate_adjust_ph_protocol(
                     G.nodes[vessel_id]['data']['liquid_volume'] = [volume]
             else:
                 G.nodes[vessel_id]['data']['liquid_volume'] = current_node_volume + volume
-                
-            debug_print(f"✅ 图节点体积数据已更新")
-        
+
         action_sequence.append(create_action_log(f"容器体积已更新 (+{volume:.2f}mL)", "📊"))
         
     except Exception as e:
-        debug_print(f"❌ 生成泵协议时出错: {str(e)}")
+        debug_print(f"生成泵协议时出错: {str(e)}")
         action_sequence.append(create_action_log(f"泵协议生成失败: {str(e)}", "❌"))
         raise ValueError(f"生成泵协议时出错: {str(e)}")
     
     # 7. 混合搅拌
     if stir and stirrer_id:
-        debug_print(f"🔍 步骤7: 混合搅拌...")
         action_sequence.append(create_action_log(f"开始混合搅拌 {stir_time:.0f}s", "🌀"))
         
         action_sequence.append({
@@ -448,14 +337,10 @@ def generate_adjust_ph_protocol(
                 "purpose": f"pH调节: 混合试剂，目标pH={ph_value}"
             }
         })
-        
-        debug_print(f"✅ 混合搅拌设置完成")
     else:
-        debug_print(f"⏭️ 跳过混合搅拌")
         action_sequence.append(create_action_log("跳过混合搅拌", "⏭️"))
-    
+
     # 8. 等待平衡
-    debug_print(f"🔍 步骤8: 反应平衡...")
     action_sequence.append(create_action_log(f"等待pH平衡 {settling_time:.0f}s", "⚖️"))
     
     action_sequence.append({
@@ -468,17 +353,7 @@ def generate_adjust_ph_protocol(
     
     # 9. 完成总结
     total_time = addition_time + stir_time + settling_time
-    
-    debug_print("=" * 60)
-    debug_print(f"🎉 pH调节协议生成完成")
-    debug_print(f"📊 协议统计:")
-    debug_print(f"  📋 总动作数: {len(action_sequence)}")
-    debug_print(f"  ⏱️ 预计总时间: {total_time:.0f}s ({total_time/60:.1f}分钟)")
-    debug_print(f"  🧪 试剂: {reagent}")
-    debug_print(f"  📏 体积: {volume:.2f}mL")
-    debug_print(f"  📊 目标pH: {ph_value}")
-    debug_print(f"  🥼 目标容器: {vessel_id}")
-    debug_print("=" * 60)
+    debug_print(f"pH调节协议完成: {len(action_sequence)} 个动作, {total_time:.0f}s, {volume:.2f}mL {reagent} → {vessel_id} pH {ph_value}")
     
     # 添加完成日志
     summary_msg = f"pH调节协议完成: {vessel_id} → pH {ph_value} (使用 {volume:.2f}mL {reagent})"
@@ -510,28 +385,18 @@ def generate_adjust_ph_protocol_stepwise(
     """
     # 🔧 核心修改：从字典中提取容器ID
     vessel_id = vessel["id"]
-    
-    debug_print("=" * 60)
-    debug_print(f"🔄 开始分步pH调节")
-    debug_print(f"📋 分步参数:")
-    debug_print(f"  🥼 vessel: {vessel} (ID: {vessel_id})")
-    debug_print(f"  📊 ph_value: {ph_value}")
-    debug_print(f"  🧪 reagent: {reagent}")
-    debug_print(f"  📏 max_volume: {max_volume}mL")
-    debug_print(f"  🔢 steps: {steps}")
-    debug_print("=" * 60)
+
+    debug_print(f"分步pH调节: vessel={vessel_id}, ph={ph_value}, reagent={reagent}, max_volume={max_volume}mL, steps={steps}")
     
     action_sequence = []
     
     # 每步添加的体积
     step_volume = max_volume / steps
-    debug_print(f"📊 每步体积: {step_volume:.2f}mL")
     
     action_sequence.append(create_action_log(f"开始分步pH调节 ({steps}步)", "🔄"))
     action_sequence.append(create_action_log(f"每步添加: {step_volume:.2f}mL", "📏"))
     
     for i in range(steps):
-        debug_print(f"🔄 执行第 {i+1}/{steps} 步，添加 {step_volume:.2f}mL")
         action_sequence.append(create_action_log(f"第 {i+1}/{steps} 步开始", "🚀"))
         
         # 生成单步协议
@@ -548,12 +413,10 @@ def generate_adjust_ph_protocol_stepwise(
         )
         
         action_sequence.extend(step_actions)
-        debug_print(f"✅ 第 {i+1}/{steps} 步完成，添加了 {len(step_actions)} 个动作")
         action_sequence.append(create_action_log(f"第 {i+1}/{steps} 步完成", "✅"))
         
         # 步骤间等待
         if i < steps - 1:
-            debug_print(f"⏳ 步骤间等待30s")
             action_sequence.append(create_action_log("步骤间等待...", "⏳"))
             action_sequence.append({
                 "action_name": "wait",
@@ -563,7 +426,7 @@ def generate_adjust_ph_protocol_stepwise(
                 }
             })
     
-    debug_print(f"🎉 分步pH调节完成，共 {len(action_sequence)} 个动作")
+    debug_print(f"分步pH调节完成: {len(action_sequence)} 个动作")
     action_sequence.append(create_action_log("分步pH调节全部完成", "🎉"))
     
     return action_sequence
@@ -577,7 +440,7 @@ def generate_acidify_protocol(
 ) -> List[Dict[str, Any]]:
     """酸化协议"""
     vessel_id = vessel["id"]
-    debug_print(f"🍋 生成酸化协议: {vessel_id} → pH {target_ph} (使用 {acid})")
+    debug_print(f"酸化协议: {vessel_id} → pH {target_ph} ({acid})")
     return generate_adjust_ph_protocol(
         G, vessel, target_ph, acid
     )
@@ -590,7 +453,7 @@ def generate_basify_protocol(
 ) -> List[Dict[str, Any]]:
     """碱化协议"""
     vessel_id = vessel["id"]
-    debug_print(f"🧂 生成碱化协议: {vessel_id} → pH {target_ph} (使用 {base})")
+    debug_print(f"碱化协议: {vessel_id} → pH {target_ph} ({base})")
     return generate_adjust_ph_protocol(
         G, vessel, target_ph, base
     )
@@ -602,7 +465,7 @@ def generate_neutralize_protocol(
 ) -> List[Dict[str, Any]]:
     """中和协议（pH=7）"""
     vessel_id = vessel["id"]
-    debug_print(f"⚖️ 生成中和协议: {vessel_id} → pH 7.0 (使用 {reagent})")
+    debug_print(f"中和协议: {vessel_id} → pH 7.0 ({reagent})")
     return generate_adjust_ph_protocol(
         G, vessel, 7.0, reagent
     )
@@ -610,10 +473,7 @@ def generate_neutralize_protocol(
 # 测试函数
 def test_adjust_ph_protocol():
     """测试pH调节协议"""
-    debug_print("=== ADJUST PH PROTOCOL 增强版测试 ===")
-    
     # 测试体积计算
-    debug_print("🧮 测试体积计算...")
     test_cases = [
         (2.0, "hydrochloric acid", 100.0),
         (4.0, "hydrochloric acid", 100.0),
@@ -621,12 +481,12 @@ def test_adjust_ph_protocol():
         (10.0, "sodium hydroxide", 100.0),
         (7.0, "unknown reagent", 100.0)
     ]
-    
+
     for ph, reagent, volume in test_cases:
         result = calculate_reagent_volume(ph, reagent, volume)
-        debug_print(f"📊 {reagent} → pH {ph}: {result:.2f}mL")
-    
-    debug_print("✅ 测试完成")
+        debug_print(f"{reagent} → pH {ph}: {result:.2f}mL")
+
+    debug_print("测试完成")
 
 if __name__ == "__main__":
     test_adjust_ph_protocol()

unilabos/compile/agv_transfer_protocol.py

@@ -1,4 +1,12 @@
+"""
+AGV 单物料转运编译器
+
+从 physical_setup_graph 中查询 AGV 配置（device_roles, route_table），
+不再硬编码 device_id 和路由表。
+"""
+
 import networkx as nx
+from unilabos.compile._agv_utils import find_agv_config
 
 
 def generate_agv_transfer_protocol(
@@ -17,37 +25,32 @@ def generate_agv_transfer_protocol(
     from_repo_id = from_repo_["id"]
     to_repo_id = to_repo_["id"]
 
-    wf_list = {
-        ("AiChemEcoHiWo", "zhixing_agv"): {"nav_command" : '{"target" : "LM14"}',
-                             "arm_command": '{"task_name" : "camera/250111_biaozhi.urp"}'},
-        ("AiChemEcoHiWo", "AGV"): {"nav_command" : '{"target" : "LM14"}',
-                             "arm_command": '{"task_name" : "camera/250111_biaozhi.urp"}'},
+    # 从 G 中查询 AGV 配置
+    agv_cfg = find_agv_config(G)
+    device_roles = agv_cfg["device_roles"]
+    route_table = agv_cfg["route_table"]
 
-        ("zhixing_agv", "Revvity"): {"nav_command" : '{"target" : "LM13"}',
-                             "arm_command": '{"task_name" : "camera/250111_put_board.urp"}'},
+    route_key = f"{from_repo_id}->{to_repo_id}"
+    if route_key not in route_table:
+        raise KeyError(f"AGV 路由表中未找到路线: {route_key}，可用路线: {list(route_table.keys())}")
 
-        ("AGV", "Revvity"): {"nav_command" : '{"target" : "LM13"}',
-                             "arm_command": '{"task_name" : "camera/250111_put_board.urp"}'},
+    route = route_table[route_key]
+    nav_device = device_roles.get("navigator", device_roles.get("nav"))
+    arm_device = device_roles.get("arm")
 
-        ("Revvity", "HPLC"): {"nav_command": '{"target" : "LM13"}',
-                              "arm_command": '{"task_name" : "camera/250111_hplc.urp"}'},
-
-        ("HPLC", "Revvity"): {"nav_command": '{"target" : "LM13"}',
-                              "arm_command": '{"task_name" : "camera/250111_lfp.urp"}'},
-    }
     return [
         {
-            "device_id": "zhixing_agv",
+            "device_id": nav_device,
             "action_name": "send_nav_task",
             "action_kwargs": {
-                "command": wf_list[(from_repo_id, to_repo_id)]["nav_command"]
+                "command": route["nav_command"]
             }
         },
         {
-            "device_id": "zhixing_ur_arm",
+            "device_id": arm_device,
             "action_name": "move_pos_task",
             "action_kwargs": {
-                "command": wf_list[(from_repo_id, to_repo_id)]["arm_command"]
+                "command": route.get("arm_command", route.get("arm_place", ""))
             }
         }
     ]

unilabos/compile/batch_transfer_protocol.py

@@ -0,0 +1,228 @@
+"""
+批量物料转运编译器
+
+将 BatchTransferProtocol 编译为多批次的 nav → pick × N → nav → place × N 动作序列。
+自动按 AGV 容量分批，全程维护三方 children dict 的物料系统一致性。
+"""
+
+import copy
+from typing import Any, Dict, List
+
+import networkx as nx
+
+from unilabos.compile._agv_utils import find_agv_config, split_batches
+
+
+def generate_batch_transfer_protocol(
+    G: nx.Graph,
+    from_repo: dict,
+    to_repo: dict,
+    transfer_resources: list,
+    from_positions: list,
+    to_positions: list,
+) -> List[Dict[str, Any]]:
+    """编译批量转运协议为可执行的 action steps
+
+    Args:
+        G: 设备图 (physical_setup_graph)
+        from_repo: 来源工站资源 dict（{station_id: {..., children: {...}}}）
+        to_repo: 目标工站资源 dict（含堆栈和位置信息）
+        transfer_resources: 被转运的物料列表（Resource dict）
+        from_positions: 来源 slot 位置列表（与 transfer_resources 平行）
+        to_positions: 目标 slot 位置列表（与 transfer_resources 平行）
+
+    Returns:
+        action steps 列表，ROS2WorkstationNode 按序执行
+    """
+    if not transfer_resources:
+        return []
+
+    n = len(transfer_resources)
+    if len(from_positions) != n or len(to_positions) != n:
+        raise ValueError(
+            f"transfer_resources({n}), from_positions({len(from_positions)}), "
+            f"to_positions({len(to_positions)}) 长度不一致"
+        )
+
+    # 组合为内部 transfer_items 便于分批处理
+    transfer_items = []
+    for i in range(n):
+        res = transfer_resources[i] if isinstance(transfer_resources[i], dict) else {}
+        transfer_items.append({
+            "resource_id": res.get("id", res.get("name", "")),
+            "resource_uuid": res.get("sample_id", ""),
+            "from_position": from_positions[i],
+            "to_position": to_positions[i],
+            "resource": res,
+        })
+
+    # 查询 AGV 配置
+    agv_cfg = find_agv_config(G)
+    agv_id = agv_cfg["agv_id"]
+    device_roles = agv_cfg["device_roles"]
+    route_table = agv_cfg["route_table"]
+    capacity = agv_cfg["capacity"]
+
+    if capacity <= 0:
+        raise ValueError(f"AGV {agv_id} 容量为 0，请检查 Warehouse 子节点配置")
+
+    nav_device = device_roles.get("navigator", device_roles.get("nav"))
+    arm_device = device_roles.get("arm")
+    if not nav_device or not arm_device:
+        raise ValueError(f"AGV {agv_id} device_roles 缺少 navigator 或 arm: {device_roles}")
+
+    from_repo_ = list(from_repo.values())[0]
+    to_repo_ = list(to_repo.values())[0]
+    from_station_id = from_repo_["id"]
+    to_station_id = to_repo_["id"]
+
+    # 查找路由
+    route_to_source = _find_route(route_table, agv_id, from_station_id)
+    route_to_target = _find_route(route_table, from_station_id, to_station_id)
+
+    # 构建 AGV carrier 的 children dict（用于 compile 阶段状态追踪）
+    agv_carrier_children: Dict[str, Any] = {}
+
+    # 计算 slot 名称（A01, A02, B01, ...）
+    agv_slot_names = _get_agv_slot_names(G, agv_cfg)
+
+    # 分批
+    batches = split_batches(transfer_items, capacity)
+
+    steps: List[Dict[str, Any]] = []
+
+    for batch_idx, batch in enumerate(batches):
+        is_last_batch = (batch_idx == len(batches) - 1)
+
+        # 阶段 1: AGV 导航到来源工站
+        steps.append({
+            "device_id": nav_device,
+            "action_name": "send_nav_task",
+            "action_kwargs": {
+                "command": route_to_source.get("nav_command", "")
+            },
+            "_comment": f"批次{batch_idx + 1}/{len(batches)}: AGV 导航至来源 {from_station_id}"
+        })
+
+        # 阶段 2: 逐个 pick
+        for item_idx, item in enumerate(batch):
+            from_pos = item["from_position"]
+            slot = agv_slot_names[item_idx] if item_idx < len(agv_slot_names) else f"S{item_idx + 1}"
+
+            # compile 阶段更新 children dict
+            if from_pos in from_repo_.get("children", {}):
+                resource_data = from_repo_["children"].pop(from_pos)
+                resource_data["parent"] = agv_id
+                agv_carrier_children[slot] = resource_data
+
+            steps.append({
+                "device_id": arm_device,
+                "action_name": "move_pos_task",
+                "action_kwargs": {
+                    "command": route_to_source.get("arm_pick", route_to_source.get("arm_command", ""))
+                },
+                "_transfer_meta": {
+                    "phase": "pick",
+                    "resource_uuid": item.get("resource_uuid", ""),
+                    "resource_id": item.get("resource_id", ""),
+                    "from_parent": from_station_id,
+                    "from_position": from_pos,
+                    "agv_slot": slot,
+                },
+                "_comment": f"Pick {item.get('resource_id', from_pos)} → AGV.{slot}"
+            })
+
+        # 阶段 3: AGV 导航到目标工站
+        steps.append({
+            "device_id": nav_device,
+            "action_name": "send_nav_task",
+            "action_kwargs": {
+                "command": route_to_target.get("nav_command", "")
+            },
+            "_comment": f"批次{batch_idx + 1}: AGV 导航至目标 {to_station_id}"
+        })
+
+        # 阶段 4: 逐个 place
+        for item_idx, item in enumerate(batch):
+            to_pos = item["to_position"]
+            slot = agv_slot_names[item_idx] if item_idx < len(agv_slot_names) else f"S{item_idx + 1}"
+
+            # compile 阶段更新 children dict
+            if slot in agv_carrier_children:
+                resource_data = agv_carrier_children.pop(slot)
+                resource_data["parent"] = to_repo_["id"]
+                to_repo_["children"][to_pos] = resource_data
+
+            steps.append({
+                "device_id": arm_device,
+                "action_name": "move_pos_task",
+                "action_kwargs": {
+                    "command": route_to_target.get("arm_place", route_to_target.get("arm_command", ""))
+                },
+                "_transfer_meta": {
+                    "phase": "place",
+                    "resource_uuid": item.get("resource_uuid", ""),
+                    "resource_id": item.get("resource_id", ""),
+                    "to_parent": to_station_id,
+                    "to_position": to_pos,
+                    "agv_slot": slot,
+                },
+                "_comment": f"Place AGV.{slot} → {to_station_id}.{to_pos}"
+            })
+
+        # 如果还有下一批，AGV 需要返回来源取料
+        if not is_last_batch:
+            steps.append({
+                "device_id": nav_device,
+                "action_name": "send_nav_task",
+                "action_kwargs": {
+                    "command": route_to_source.get("nav_command", "")
+                },
+                "_comment": f"AGV 返回来源 {from_station_id} 取下一批"
+            })
+
+    return steps
+
+
+def _find_route(route_table: Dict[str, Any], from_id: str, to_id: str) -> Dict[str, str]:
+    """在路由表中查找路线，支持 A->B 和 (A, B) 两种 key 格式"""
+    # 优先 "A->B" 格式
+    key = f"{from_id}->{to_id}"
+    if key in route_table:
+        return route_table[key]
+    # 兼容 tuple key（JSON 中以逗号分隔字符串表示）
+    tuple_key = f"({from_id}, {to_id})"
+    if tuple_key in route_table:
+        return route_table[tuple_key]
+    raise KeyError(f"路由表中未找到: {key}，可用路线: {list(route_table.keys())}")
+
+
+def _get_agv_slot_names(G: nx.Graph, agv_cfg: dict) -> List[str]:
+    """从设备图中获取 AGV Warehouse 的 slot 名称列表"""
+    agv_id = agv_cfg["agv_id"]
+    neighbors = G.successors(agv_id) if G.is_directed() else G.neighbors(agv_id)
+    for neighbor in neighbors:
+        ndata = G.nodes[neighbor]
+        node_type = ndata.get("type", "")
+        res_content = ndata.get("res_content")
+        if hasattr(res_content, "type"):
+            node_type = res_content.type or node_type
+        elif isinstance(res_content, dict):
+            node_type = res_content.get("type", node_type)
+        if node_type == "warehouse":
+            config = ndata.get("config", {})
+            if hasattr(res_content, "config") and isinstance(res_content.config, dict):
+                config = res_content.config
+            elif isinstance(res_content, dict):
+                config = res_content.get("config", config)
+            num_x = config.get("num_items_x", 1)
+            num_y = config.get("num_items_y", 1)
+            num_z = config.get("num_items_z", 1)
+            # 与 warehouse_factory 一致的命名
+            letters = "ABCDEFGHIJKLMNOPQRSTUVWXYZ"
+            len_x = num_x if num_z == 1 else (num_y if num_x == 1 else num_x)
+            len_y = num_y if num_z == 1 else (num_z if num_x == 1 else num_z)
+            return [f"{letters[j]}{i + 1:02d}" for i in range(len_x) for j in range(len_y)]
+    # 兜底生成通用名称
+    capacity = agv_cfg.get("capacity", 4)
+    return [f"S{i + 1}" for i in range(capacity)]

unilabos/compile/clean_vessel_protocol.py

@@ -1,7 +1,9 @@
 from typing import List, Dict, Any
 import networkx as nx
-from .utils.vessel_parser import get_vessel, find_solvent_vessel
+from .utils.vessel_parser import get_vessel, find_solvent_vessel, find_connected_heatchill
+from .utils.logger_util import debug_print
 from .pump_protocol import generate_pump_protocol
+from .utils.resource_helper import get_resource_liquid_volume
 
 
 def find_solvent_vessel_by_any_match(G: nx.DiGraph, solvent: str) -> str:
@@ -17,43 +19,23 @@ def find_waste_vessel(G: nx.DiGraph) -> str:
     """
     possible_waste_names = [
         "waste_workup",
-        "flask_waste", 
+        "flask_waste",
         "bottle_waste",
         "waste",
         "waste_vessel",
         "waste_container"
     ]
-    
+
     for waste_name in possible_waste_names:
         if waste_name in G.nodes():
             return waste_name
-    
+
     raise ValueError(f"未找到废液容器。尝试了以下名称: {possible_waste_names}")
 
 
-def find_connected_heatchill(G: nx.DiGraph, vessel: str) -> str:
-    """
-    查找与指定容器相连的加热冷却设备
-    """
-    # 查找所有加热冷却设备节点
-    heatchill_nodes = [node for node in G.nodes() 
-                      if (G.nodes[node].get('class') or '') == 'virtual_heatchill']
-    
-    # 检查哪个加热设备与目标容器相连（机械连接）
-    for heatchill in heatchill_nodes:
-        if G.has_edge(heatchill, vessel) or G.has_edge(vessel, heatchill):
-            return heatchill
-    
-    # 如果没有直接连接，返回第一个可用的加热设备
-    if heatchill_nodes:
-        return heatchill_nodes[0]
-    
-    return None  # 没有加热设备也可以工作，只是不能加热
-
-
 def generate_clean_vessel_protocol(
     G: nx.DiGraph,
-    vessel: dict,  # 🔧 修改：从字符串改为字典类型
+    vessel: dict,
     solvent: str,
     volume: float,
     temp: float,
@@ -61,7 +43,7 @@ def generate_clean_vessel_protocol(
 ) -> List[Dict[str, Any]]:
     """
     生成容器清洗操作的协议序列，复用 pump_protocol 的成熟算法
-    
+
     清洗流程：
     1. 查找溶剂容器和废液容器
     2. 如果需要加热，启动加热设备
@@ -70,63 +52,50 @@ def generate_clean_vessel_protocol(
        b. (可选) 等待清洗作用时间
        c. 使用 pump_protocol 将清洗液从目标容器转移到废液容器
     4. 如果加热了，停止加热
-    
+
     Args:
         G: 有向图，节点为设备和容器，边为流体管道
         vessel: 要清洗的容器字典（包含id字段）
-        solvent: 用于清洗的溶剂名称  
+        solvent: 用于清洗的溶剂名称
         volume: 每次清洗使用的溶剂体积
         temp: 清洗时的温度
         repeats: 清洗操作的重复次数，默认为 1
-    
+
     Returns:
         List[Dict[str, Any]]: 容器清洗操作的动作序列
-    
-    Raises:
-        ValueError: 当找不到必要的容器或设备时抛出异常
-    
-    Examples:
-        clean_protocol = generate_clean_vessel_protocol(G, {"id": "main_reactor"}, "water", 100.0, 60.0, 2)
     """
-    # 🔧 核心修改：从字典中提取容器ID
     vessel_id, vessel_data = get_vessel(vessel)
-    
+
     action_sequence = []
-    
-    print(f"CLEAN_VESSEL: 开始生成容器清洗协议")
-    print(f"  - 目标容器: {vessel} (ID: {vessel_id})")
-    print(f"  - 清洗溶剂: {solvent}")
-    print(f"  - 清洗体积: {volume} mL")
-    print(f"  - 清洗温度: {temp}°C")
-    print(f"  - 重复次数: {repeats}")
-    
+
+    debug_print(f"开始生成容器清洗协议: vessel={vessel_id}, solvent={solvent}, volume={volume}mL, temp={temp}°C, repeats={repeats}")
+
     # 验证目标容器存在
     if vessel_id not in G.nodes():
         raise ValueError(f"目标容器 '{vessel_id}' 不存在于系统中")
-    
+
     # 查找溶剂容器
     try:
         solvent_vessel = find_solvent_vessel(G, solvent)
-        print(f"CLEAN_VESSEL: 找到溶剂容器: {solvent_vessel}")
+        debug_print(f"找到溶剂容器: {solvent_vessel}")
     except ValueError as e:
         raise ValueError(f"无法找到溶剂容器: {str(e)}")
-    
+
     # 查找废液容器
     try:
         waste_vessel = find_waste_vessel(G)
-        print(f"CLEAN_VESSEL: 找到废液容器: {waste_vessel}")
+        debug_print(f"找到废液容器: {waste_vessel}")
     except ValueError as e:
         raise ValueError(f"无法找到废液容器: {str(e)}")
-    
+
     # 查找加热设备（可选）
-    heatchill_id = find_connected_heatchill(G, vessel_id)  # 🔧 使用 vessel_id
+    heatchill_id = find_connected_heatchill(G, vessel_id)
     if heatchill_id:
-        print(f"CLEAN_VESSEL: 找到加热设备: {heatchill_id}")
+        debug_print(f"找到加热设备: {heatchill_id}")
     else:
-        print(f"CLEAN_VESSEL: 未找到加热设备，将在室温下清洗")
-    
-    # 🔧 新增：记录清洗前的容器状态
-    print(f"CLEAN_VESSEL: 记录清洗前容器状态...")
+        debug_print(f"未找到加热设备，将在室温下清洗")
+
+    # 记录清洗前的容器状态
     original_liquid_volume = 0.0
     if "data" in vessel and "liquid_volume" in vessel["data"]:
         current_volume = vessel["data"]["liquid_volume"]
@@ -134,79 +103,69 @@ def generate_clean_vessel_protocol(
             original_liquid_volume = current_volume[0]
         elif isinstance(current_volume, (int, float)):
             original_liquid_volume = current_volume
-    print(f"CLEAN_VESSEL: 清洗前液体体积: {original_liquid_volume:.2f}mL")
-    
+
     # 第一步：如果需要加热且有加热设备，启动加热
     if temp > 25.0 and heatchill_id:
-        print(f"CLEAN_VESSEL: 启动加热至 {temp}°C")
+        debug_print(f"启动加热至 {temp}°C")
         heatchill_start_action = {
             "device_id": heatchill_id,
             "action_name": "heat_chill_start",
             "action_kwargs": {
-                "vessel": {"id": vessel_id},  # 🔧 使用 vessel_id
+                "vessel": {"id": vessel_id},
                 "temp": temp,
                 "purpose": f"cleaning with {solvent}"
             }
         }
         action_sequence.append(heatchill_start_action)
-        
-        # 等待温度稳定
+
         wait_action = {
-            "action_name": "wait", 
-            "action_kwargs": {"time": 30}  # 等待30秒让温度稳定
+            "action_name": "wait",
+            "action_kwargs": {"time": 30}
         }
         action_sequence.append(wait_action)
-    
+
     # 第二步：重复清洗操作
     for repeat in range(repeats):
-        print(f"CLEAN_VESSEL: 执行第 {repeat + 1} 次清洗")
-        
+        debug_print(f"执行第 {repeat + 1}/{repeats} 次清洗")
+
         # 2a. 使用 pump_protocol 将溶剂转移到目标容器
-        print(f"CLEAN_VESSEL: 将 {volume} mL {solvent} 转移到 {vessel_id}")
         try:
-            # 调用成熟的 pump_protocol 算法
             add_solvent_actions = generate_pump_protocol(
                 G=G,
                 from_vessel=solvent_vessel,
-                to_vessel=vessel_id,  # 🔧 使用 vessel_id
+                to_vessel=vessel_id,
                 volume=volume,
-                flowrate=2.5,  # 适中的流速，避免飞溅
+                flowrate=2.5,
                 transfer_flowrate=2.5
             )
             action_sequence.extend(add_solvent_actions)
-            
-            # 🔧 新增：更新容器体积（添加清洗溶剂）
-            print(f"CLEAN_VESSEL: 更新容器体积 - 添加清洗溶剂 {volume:.2f}mL")
+
+            # 更新容器体积（添加清洗溶剂）
             if "data" not in vessel:
                 vessel["data"] = {}
-            
+
             if "liquid_volume" in vessel["data"]:
                 current_volume = vessel["data"]["liquid_volume"]
                 if isinstance(current_volume, list):
                     if len(current_volume) > 0:
                         vessel["data"]["liquid_volume"][0] += volume
-                        print(f"CLEAN_VESSEL: 添加溶剂后体积: {vessel['data']['liquid_volume'][0]:.2f}mL (+{volume:.2f}mL)")
                     else:
                         vessel["data"]["liquid_volume"] = [volume]
-                        print(f"CLEAN_VESSEL: 初始化清洗体积: {volume:.2f}mL")
                 elif isinstance(current_volume, (int, float)):
                     vessel["data"]["liquid_volume"] += volume
-                    print(f"CLEAN_VESSEL: 添加溶剂后体积: {vessel['data']['liquid_volume']:.2f}mL (+{volume:.2f}mL)")
                 else:
                     vessel["data"]["liquid_volume"] = volume
-                    print(f"CLEAN_VESSEL: 重置体积为: {volume:.2f}mL")
             else:
                 vessel["data"]["liquid_volume"] = volume
-                print(f"CLEAN_VESSEL: 创建新体积记录: {volume:.2f}mL")
-            
-            # 🔧 同时更新图中的容器数据
+
+            # 同时更新图中的容器数据
             if vessel_id in G.nodes():
                 if 'data' not in G.nodes[vessel_id]:
                     G.nodes[vessel_id]['data'] = {}
-                
+
                 vessel_node_data = G.nodes[vessel_id]['data']
                 current_node_volume = vessel_node_data.get('liquid_volume', 0.0)
-                
+
                 if isinstance(current_node_volume, list):
                     if len(current_node_volume) > 0:
                         G.nodes[vessel_id]['data']['liquid_volume'][0] += volume
@@ -214,58 +173,48 @@ def generate_clean_vessel_protocol(
                         G.nodes[vessel_id]['data']['liquid_volume'] = [volume]
                 else:
                     G.nodes[vessel_id]['data']['liquid_volume'] = current_node_volume + volume
-                
-                print(f"CLEAN_VESSEL: 图节点体积数据已更新")
-            
+
         except Exception as e:
             raise ValueError(f"无法将溶剂转移到容器: {str(e)}")
-        
-        # 2b. 等待清洗作用时间（让溶剂充分清洗容器）
-        cleaning_wait_time = 60 if temp > 50.0 else 30  # 高温下等待更久
-        print(f"CLEAN_VESSEL: 等待清洗作用 {cleaning_wait_time} 秒")
+
+        # 2b. 等待清洗作用时间
+        cleaning_wait_time = 60 if temp > 50.0 else 30
         wait_action = {
-            "action_name": "wait", 
+            "action_name": "wait",
             "action_kwargs": {"time": cleaning_wait_time}
         }
         action_sequence.append(wait_action)
-        
+
         # 2c. 使用 pump_protocol 将清洗液转移到废液容器
-        print(f"CLEAN_VESSEL: 将清洗液从 {vessel_id} 转移到废液容器")
         try:
-            # 调用成熟的 pump_protocol 算法
             remove_waste_actions = generate_pump_protocol(
                 G=G,
-                from_vessel=vessel_id,  # 🔧 使用 vessel_id
+                from_vessel=vessel_id,
                 to_vessel=waste_vessel,
                 volume=volume,
-                flowrate=2.5,  # 适中的流速
+                flowrate=2.5,
                 transfer_flowrate=2.5
             )
             action_sequence.extend(remove_waste_actions)
-            
-            # 🔧 新增：更新容器体积（移除清洗液）
-            print(f"CLEAN_VESSEL: 更新容器体积 - 移除清洗液 {volume:.2f}mL")
+
+            # 更新容器体积（移除清洗液）
             if "data" in vessel and "liquid_volume" in vessel["data"]:
                 current_volume = vessel["data"]["liquid_volume"]
                 if isinstance(current_volume, list):
                     if len(current_volume) > 0:
                         vessel["data"]["liquid_volume"][0] = max(0.0, vessel["data"]["liquid_volume"][0] - volume)
-                        print(f"CLEAN_VESSEL: 移除清洗液后体积: {vessel['data']['liquid_volume'][0]:.2f}mL (-{volume:.2f}mL)")
                     else:
                         vessel["data"]["liquid_volume"] = [0.0]
-                        print(f"CLEAN_VESSEL: 重置体积为0mL")
                 elif isinstance(current_volume, (int, float)):
                     vessel["data"]["liquid_volume"] = max(0.0, current_volume - volume)
-                    print(f"CLEAN_VESSEL: 移除清洗液后体积: {vessel['data']['liquid_volume']:.2f}mL (-{volume:.2f}mL)")
                 else:
                     vessel["data"]["liquid_volume"] = 0.0
-                    print(f"CLEAN_VESSEL: 重置体积为0mL")
-            
-            # 🔧 同时更新图中的容器数据
+
+            # 同时更新图中的容器数据
             if vessel_id in G.nodes():
                 vessel_node_data = G.nodes[vessel_id].get('data', {})
                 current_node_volume = vessel_node_data.get('liquid_volume', 0.0)
-                
+
                 if isinstance(current_node_volume, list):
                     if len(current_node_volume) > 0:
                         G.nodes[vessel_id]['data']['liquid_volume'][0] = max(0.0, current_node_volume[0] - volume)
@@ -273,34 +222,30 @@ def generate_clean_vessel_protocol(
                         G.nodes[vessel_id]['data']['liquid_volume'] = [0.0]
                 else:
                     G.nodes[vessel_id]['data']['liquid_volume'] = max(0.0, current_node_volume - volume)
-                
-                print(f"CLEAN_VESSEL: 图节点体积数据已更新")
-            
+
         except Exception as e:
             raise ValueError(f"无法将清洗液转移到废液容器: {str(e)}")
-        
+
         # 2d. 清洗循环间的短暂等待
-        if repeat < repeats - 1:  # 不是最后一次清洗
-            print(f"CLEAN_VESSEL: 清洗循环间等待")
+        if repeat < repeats - 1:
             wait_action = {
-                "action_name": "wait", 
+                "action_name": "wait",
                 "action_kwargs": {"time": 10}
             }
             action_sequence.append(wait_action)
-    
+
     # 第三步：如果加热了，停止加热
     if temp > 25.0 and heatchill_id:
-        print(f"CLEAN_VESSEL: 停止加热")
         heatchill_stop_action = {
             "device_id": heatchill_id,
             "action_name": "heat_chill_stop",
             "action_kwargs": {
-                "vessel": {"id": vessel_id},  # 🔧 使用 vessel_id
+                "vessel": {"id": vessel_id},
             }
         }
         action_sequence.append(heatchill_stop_action)
-    
-    # 🔧 新增：清洗完成后的状态报告
+
+    # 清洗完成后的状态
     final_liquid_volume = 0.0
     if "data" in vessel and "liquid_volume" in vessel["data"]:
         current_volume = vessel["data"]["liquid_volume"]
@@ -308,20 +253,17 @@ def generate_clean_vessel_protocol(
             final_liquid_volume = current_volume[0]
         elif isinstance(current_volume, (int, float)):
             final_liquid_volume = current_volume
-    
-    print(f"CLEAN_VESSEL: 清洗完成")
-    print(f"  - 清洗前体积: {original_liquid_volume:.2f}mL")
-    print(f"  - 清洗后体积: {final_liquid_volume:.2f}mL")
-    print(f"  - 生成了 {len(action_sequence)} 个动作")
-    
+
+    debug_print(f"清洗完成: {len(action_sequence)} 个动作, 体积 {original_liquid_volume:.2f} -> {final_liquid_volume:.2f}mL")
+
     return action_sequence
 
 
-# 便捷函数：常用清洗方案
+# 便捷函数
 def generate_quick_clean_protocol(
-    G: nx.DiGraph, 
-    vessel: dict,  # 🔧 修改：从字符串改为字典类型
-    solvent: str = "water", 
+    G: nx.DiGraph,
+    vessel: dict,
+    solvent: str = "water",
     volume: float = 100.0
 ) -> List[Dict[str, Any]]:
     """快速清洗：室温，单次清洗"""
@@ -329,9 +271,9 @@ def generate_quick_clean_protocol(
 
 
 def generate_thorough_clean_protocol(
-    G: nx.DiGraph, 
-    vessel: dict,  # 🔧 修改：从字符串改为字典类型
-    solvent: str = "water", 
+    G: nx.DiGraph,
+    vessel: dict,
+    solvent: str = "water",
     volume: float = 150.0,
     temp: float = 60.0
 ) -> List[Dict[str, Any]]:
@@ -340,13 +282,13 @@ def generate_thorough_clean_protocol(
 
 
 def generate_organic_clean_protocol(
-    G: nx.DiGraph, 
-    vessel: dict,  # 🔧 修改：从字符串改为字典类型
+    G: nx.DiGraph,
+    vessel: dict,
     volume: float = 100.0
 ) -> List[Dict[str, Any]]:
     """有机清洗：先用有机溶剂，再用水清洗"""
     action_sequence = []
-    
+
     # 第一步：有机溶剂清洗
     try:
         organic_actions = generate_clean_vessel_protocol(
@@ -354,96 +296,71 @@ def generate_organic_clean_protocol(
         )
         action_sequence.extend(organic_actions)
     except ValueError:
-        # 如果没有丙酮，尝试乙醇
         try:
             organic_actions = generate_clean_vessel_protocol(
                 G, vessel, "ethanol", volume, 25.0, 2
             )
             action_sequence.extend(organic_actions)
         except ValueError:
-            print("警告：未找到有机溶剂，跳过有机清洗步骤")
-    
+            debug_print("未找到有机溶剂，跳过有机清洗步骤")
+
     # 第二步：水清洗
     water_actions = generate_clean_vessel_protocol(
         G, vessel, "water", volume, 25.0, 2
     )
     action_sequence.extend(water_actions)
-    
+
     return action_sequence
 
 
-def get_vessel_liquid_volume(G: nx.DiGraph, vessel: str) -> float:
-    """获取容器中的液体体积（修复版）"""
-    if vessel not in G.nodes():
-        return 0.0
-    
-    vessel_data = G.nodes[vessel].get('data', {})
-    liquids = vessel_data.get('liquid', [])
-    
-    total_volume = 0.0
-    for liquid in liquids:
-        if isinstance(liquid, dict):
-            # 支持两种格式：新格式 (name, volume) 和旧格式 (liquid_type, liquid_volume)
-            volume = liquid.get('volume') or liquid.get('liquid_volume', 0.0)
-            total_volume += volume
-    
-    return total_volume
-
-
 def get_vessel_liquid_types(G: nx.DiGraph, vessel: str) -> List[str]:
     """获取容器中所有液体的类型"""
     if vessel not in G.nodes():
         return []
-    
+
     vessel_data = G.nodes[vessel].get('data', {})
     liquids = vessel_data.get('liquid', [])
-    
+
     liquid_types = []
     for liquid in liquids:
         if isinstance(liquid, dict):
-            # 支持两种格式的液体类型字段
             liquid_type = liquid.get('liquid_type') or liquid.get('name', '')
             if liquid_type:
                 liquid_types.append(liquid_type)
-    
+
     return liquid_types
 
 
 def find_vessel_by_content(G: nx.DiGraph, content: str) -> List[str]:
     """
     根据内容物查找所有匹配的容器
-    返回匹配容器的ID列表
     """
     matching_vessels = []
-    
+
     for node_id in G.nodes():
         if G.nodes[node_id].get('type') == 'container':
-            # 检查容器名称匹配
             node_name = G.nodes[node_id].get('name', '').lower()
             if content.lower() in node_id.lower() or content.lower() in node_name:
                 matching_vessels.append(node_id)
                 continue
-            
-            # 检查液体类型匹配
+
             vessel_data = G.nodes[node_id].get('data', {})
             liquids = vessel_data.get('liquid', [])
             config_data = G.nodes[node_id].get('config', {})
-            
-            # 检查 reagent_name 和 config.reagent
+
             reagent_name = vessel_data.get('reagent_name', '').lower()
             config_reagent = config_data.get('reagent', '').lower()
-            
-            if (content.lower() == reagent_name or 
+
+            if (content.lower() == reagent_name or
                 content.lower() == config_reagent):
                 matching_vessels.append(node_id)
                 continue
-            
-            # 检查液体列表
+
             for liquid in liquids:
                 if isinstance(liquid, dict):
                     liquid_type = liquid.get('liquid_type') or liquid.get('name', '')
                     if liquid_type.lower() == content.lower():
                         matching_vessels.append(node_id)
                         break
-    
-    return matching_vessels
+
+    return matching_vessels

unilabos/compile/dissolve_protocol.py

@@ -1,402 +1,19 @@
 from functools import partial
 
 import networkx as nx
-import re
 import logging
 from typing import List, Dict, Any, Union
 
-from .utils.vessel_parser import get_vessel
-from .utils.logger_util import action_log
+from .utils.logger_util import debug_print, action_log
+from .utils.unit_parser import parse_volume_input, parse_mass_input, parse_time_input, parse_temperature_input
+from .utils.vessel_parser import get_vessel, find_solvent_vessel, find_connected_heatchill, find_connected_stirrer, find_solid_dispenser
 from .pump_protocol import generate_pump_protocol_with_rinsing
 
 logger = logging.getLogger(__name__)
 
-def debug_print(message):
-    """调试输出"""
-    logger.info(f"[DISSOLVE] {message}")
-
-# 🆕 创建进度日志动作
+# 创建进度日志动作
 create_action_log = partial(action_log, prefix="[DISSOLVE]")
 
-def parse_volume_input(volume_input: Union[str, float]) -> float:
-    """
-    解析体积输入，支持带单位的字符串
-    
-    Args:
-        volume_input: 体积输入（如 "10 mL", "?", 10.0）
-    
-    Returns:
-        float: 体积（毫升）
-    """
-    if isinstance(volume_input, (int, float)):
-        debug_print(f"📏 体积输入为数值: {volume_input}")
-        return float(volume_input)
-    
-    if not volume_input or not str(volume_input).strip():
-        debug_print(f"⚠️ 体积输入为空，返回0.0mL")
-        return 0.0
-    
-    volume_str = str(volume_input).lower().strip()
-    debug_print(f"🔍 解析体积输入: '{volume_str}'")
-    
-    # 处理未知体积
-    if volume_str in ['?', 'unknown', 'tbd', 'to be determined']:
-        default_volume = 50.0  # 默认50mL
-        debug_print(f"❓ 检测到未知体积，使用默认值: {default_volume}mL 🎯")
-        return default_volume
-    
-    # 移除空格并提取数字和单位
-    volume_clean = re.sub(r'\s+', '', volume_str)
-    
-    # 匹配数字和单位的正则表达式
-    match = re.match(r'([0-9]*\.?[0-9]+)\s*(ml|l|μl|ul|microliter|milliliter|liter)?', volume_clean)
-    
-    if not match:
-        debug_print(f"❌ 无法解析体积: '{volume_str}'，使用默认值50mL")
-        return 50.0
-    
-    value = float(match.group(1))
-    unit = match.group(2) or 'ml'  # 默认单位为毫升
-    
-    # 转换为毫升
-    if unit in ['l', 'liter']:
-        volume = value * 1000.0  # L -> mL
-        debug_print(f"🔄 体积转换: {value}L → {volume}mL")
-    elif unit in ['μl', 'ul', 'microliter']:
-        volume = value / 1000.0  # μL -> mL
-        debug_print(f"🔄 体积转换: {value}μL → {volume}mL")
-    else:  # ml, milliliter 或默认
-        volume = value  # 已经是mL
-        debug_print(f"✅ 体积已为mL: {volume}mL")
-    
-    return volume
-
-def parse_mass_input(mass_input: Union[str, float]) -> float:
-    """
-    解析质量输入，支持带单位的字符串
-    
-    Args:
-        mass_input: 质量输入（如 "2.9 g", "?", 2.5）
-    
-    Returns:
-        float: 质量（克）
-    """
-    if isinstance(mass_input, (int, float)):
-        debug_print(f"⚖️ 质量输入为数值: {mass_input}g")
-        return float(mass_input)
-    
-    if not mass_input or not str(mass_input).strip():
-        debug_print(f"⚠️ 质量输入为空，返回0.0g")
-        return 0.0
-    
-    mass_str = str(mass_input).lower().strip()
-    debug_print(f"🔍 解析质量输入: '{mass_str}'")
-    
-    # 处理未知质量
-    if mass_str in ['?', 'unknown', 'tbd', 'to be determined']:
-        default_mass = 1.0  # 默认1g
-        debug_print(f"❓ 检测到未知质量，使用默认值: {default_mass}g 🎯")
-        return default_mass
-    
-    # 移除空格并提取数字和单位
-    mass_clean = re.sub(r'\s+', '', mass_str)
-    
-    # 匹配数字和单位的正则表达式
-    match = re.match(r'([0-9]*\.?[0-9]+)\s*(g|mg|kg|gram|milligram|kilogram)?', mass_clean)
-    
-    if not match:
-        debug_print(f"❌ 无法解析质量: '{mass_str}'，返回0.0g")
-        return 0.0
-    
-    value = float(match.group(1))
-    unit = match.group(2) or 'g'  # 默认单位为克
-    
-    # 转换为克
-    if unit in ['mg', 'milligram']:
-        mass = value / 1000.0  # mg -> g
-        debug_print(f"🔄 质量转换: {value}mg → {mass}g")
-    elif unit in ['kg', 'kilogram']:
-        mass = value * 1000.0  # kg -> g
-        debug_print(f"🔄 质量转换: {value}kg → {mass}g")
-    else:  # g, gram 或默认
-        mass = value  # 已经是g
-        debug_print(f"✅ 质量已为g: {mass}g")
-    
-    return mass
-
-def parse_time_input(time_input: Union[str, float]) -> float:
-    """
-    解析时间输入，支持带单位的字符串
-    
-    Args:
-        time_input: 时间输入（如 "30 min", "1 h", "?", 60.0）
-    
-    Returns:
-        float: 时间（秒）
-    """
-    if isinstance(time_input, (int, float)):
-        debug_print(f"⏱️ 时间输入为数值: {time_input}秒")
-        return float(time_input)
-    
-    if not time_input or not str(time_input).strip():
-        debug_print(f"⚠️ 时间输入为空，返回0秒")
-        return 0.0
-    
-    time_str = str(time_input).lower().strip()
-    debug_print(f"🔍 解析时间输入: '{time_str}'")
-    
-    # 处理未知时间
-    if time_str in ['?', 'unknown', 'tbd']:
-        default_time = 600.0  # 默认10分钟
-        debug_print(f"❓ 检测到未知时间，使用默认值: {default_time}s (10分钟) ⏰")
-        return default_time
-    
-    # 移除空格并提取数字和单位
-    time_clean = re.sub(r'\s+', '', time_str)
-    
-    # 匹配数字和单位的正则表达式
-    match = re.match(r'([0-9]*\.?[0-9]+)\s*(s|sec|second|min|minute|h|hr|hour|d|day)?', time_clean)
-    
-    if not match:
-        debug_print(f"❌ 无法解析时间: '{time_str}'，返回0s")
-        return 0.0
-    
-    value = float(match.group(1))
-    unit = match.group(2) or 's'  # 默认单位为秒
-    
-    # 转换为秒
-    if unit in ['min', 'minute']:
-        time_sec = value * 60.0  # min -> s
-        debug_print(f"🔄 时间转换: {value}分钟 → {time_sec}秒")
-    elif unit in ['h', 'hr', 'hour']:
-        time_sec = value * 3600.0  # h -> s
-        debug_print(f"🔄 时间转换: {value}小时 → {time_sec}秒")
-    elif unit in ['d', 'day']:
-        time_sec = value * 86400.0  # d -> s
-        debug_print(f"🔄 时间转换: {value}天 → {time_sec}秒")
-    else:  # s, sec, second 或默认
-        time_sec = value  # 已经是s
-        debug_print(f"✅ 时间已为秒: {time_sec}秒")
-    
-    return time_sec
-
-def parse_temperature_input(temp_input: Union[str, float]) -> float:
-    """
-    解析温度输入，支持带单位的字符串
-    
-    Args:
-        temp_input: 温度输入（如 "60 °C", "room temperature", "?", 25.0）
-    
-    Returns:
-        float: 温度（摄氏度）
-    """
-    if isinstance(temp_input, (int, float)):
-        debug_print(f"🌡️ 温度输入为数值: {temp_input}°C")
-        return float(temp_input)
-    
-    if not temp_input or not str(temp_input).strip():
-        debug_print(f"⚠️ 温度输入为空，使用默认室温25°C")
-        return 25.0  # 默认室温
-    
-    temp_str = str(temp_input).lower().strip()
-    debug_print(f"🔍 解析温度输入: '{temp_str}'")
-    
-    # 处理特殊温度描述
-    temp_aliases = {
-        'room temperature': 25.0,
-        'rt': 25.0,
-        'ambient': 25.0,
-        'cold': 4.0,
-        'ice': 0.0,
-        'reflux': 80.0,  # 默认回流温度
-        '?': 25.0,
-        'unknown': 25.0
-    }
-    
-    if temp_str in temp_aliases:
-        result = temp_aliases[temp_str]
-        debug_print(f"🏷️ 温度别名解析: '{temp_str}' → {result}°C")
-        return result
-    
-    # 移除空格并提取数字和单位
-    temp_clean = re.sub(r'\s+', '', temp_str)
-    
-    # 匹配数字和单位的正则表达式
-    match = re.match(r'([0-9]*\.?[0-9]+)\s*(°c|c|celsius|°f|f|fahrenheit|k|kelvin)?', temp_clean)
-    
-    if not match:
-        debug_print(f"❌ 无法解析温度: '{temp_str}'，使用默认值25°C")
-        return 25.0
-    
-    value = float(match.group(1))
-    unit = match.group(2) or 'c'  # 默认单位为摄氏度
-    
-    # 转换为摄氏度
-    if unit in ['°f', 'f', 'fahrenheit']:
-        temp_c = (value - 32) * 5/9  # F -> C
-        debug_print(f"🔄 温度转换: {value}°F → {temp_c:.1f}°C")
-    elif unit in ['k', 'kelvin']:
-        temp_c = value - 273.15  # K -> C
-        debug_print(f"🔄 温度转换: {value}K → {temp_c:.1f}°C")
-    else:  # °c, c, celsius 或默认
-        temp_c = value  # 已经是C
-        debug_print(f"✅ 温度已为°C: {temp_c}°C")
-    
-    return temp_c
-
-def find_solvent_vessel(G: nx.DiGraph, solvent: str) -> str:
-    """增强版溶剂容器查找，支持多种匹配模式"""
-    debug_print(f"🔍 开始查找溶剂 '{solvent}' 的容器...")
-    
-    # 🔧 方法1：直接搜索 data.reagent_name 和 config.reagent
-    debug_print(f"📋 方法1: 搜索reagent字段...")
-    for node in G.nodes():
-        node_data = G.nodes[node].get('data', {})
-        node_type = G.nodes[node].get('type', '')
-        config_data = G.nodes[node].get('config', {})
-        
-        # 只搜索容器类型的节点
-        if node_type == 'container':
-            reagent_name = node_data.get('reagent_name', '').lower()
-            config_reagent = config_data.get('reagent', '').lower()
-            
-            # 精确匹配
-            if reagent_name == solvent.lower() or config_reagent == solvent.lower():
-                debug_print(f"✅ 通过reagent字段精确匹配到容器: {node} 🎯")
-                return node
-            
-            # 模糊匹配
-            if (solvent.lower() in reagent_name and reagent_name) or \
-               (solvent.lower() in config_reagent and config_reagent):
-                debug_print(f"✅ 通过reagent字段模糊匹配到容器: {node} 🔍")
-                return node
-    
-    # 🔧 方法2：常见的容器命名规则
-    debug_print(f"📋 方法2: 使用命名规则查找...")
-    solvent_clean = solvent.lower().replace(' ', '_').replace('-', '_')
-    possible_names = [
-        solvent_clean,
-        f"flask_{solvent_clean}",
-        f"bottle_{solvent_clean}",
-        f"vessel_{solvent_clean}",
-        f"{solvent_clean}_flask",
-        f"{solvent_clean}_bottle",
-        f"solvent_{solvent_clean}",
-        f"reagent_{solvent_clean}",
-        f"reagent_bottle_{solvent_clean}",
-        f"reagent_bottle_1",  # 通用试剂瓶
-        f"reagent_bottle_2",
-        f"reagent_bottle_3"
-    ]
-    
-    debug_print(f"🔍 尝试的容器名称: {possible_names[:5]}... (共{len(possible_names)}个)")
-    
-    for name in possible_names:
-        if name in G.nodes():
-            node_type = G.nodes[name].get('type', '')
-            if node_type == 'container':
-                debug_print(f"✅ 通过命名规则找到容器: {name} 📝")
-                return name
-    
-    # 🔧 方法3：节点名称模糊匹配
-    debug_print(f"📋 方法3: 节点名称模糊匹配...")
-    for node_id in G.nodes():
-        node_data = G.nodes[node_id]
-        if node_data.get('type') == 'container':
-            # 检查节点名称是否包含溶剂名称
-            if solvent_clean in node_id.lower():
-                debug_print(f"✅ 通过节点名称模糊匹配到容器: {node_id} 🔍")
-                return node_id
-            
-            # 检查液体类型匹配
-            vessel_data = node_data.get('data', {})
-            liquids = vessel_data.get('liquid', [])
-            for liquid in liquids:
-                if isinstance(liquid, dict):
-                    liquid_type = liquid.get('liquid_type') or liquid.get('name', '')
-                    if liquid_type.lower() == solvent.lower():
-                        debug_print(f"✅ 通过液体类型匹配到容器: {node_id} 💧")
-                        return node_id
-    
-    # 🔧 方法4：使用第一个试剂瓶作为备选
-    debug_print(f"📋 方法4: 查找备选试剂瓶...")
-    for node_id in G.nodes():
-        node_data = G.nodes[node_id]
-        if (node_data.get('type') == 'container' and 
-            ('reagent' in node_id.lower() or 'bottle' in node_id.lower() or 'flask' in node_id.lower())):
-            debug_print(f"⚠️ 未找到专用容器，使用备选试剂瓶: {node_id} 🔄")
-            return node_id
-    
-    debug_print(f"❌ 所有方法都失败了，无法找到容器!")
-    raise ValueError(f"找不到溶剂 '{solvent}' 对应的容器")
-
-def find_connected_heatchill(G: nx.DiGraph, vessel: str) -> str:
-    """查找连接到指定容器的加热搅拌器"""
-    debug_print(f"🔍 查找连接到容器 '{vessel}' 的加热搅拌器...")
-    
-    heatchill_nodes = []
-    for node in G.nodes():
-        node_class = G.nodes[node].get('class', '').lower()
-        if 'heatchill' in node_class:
-            heatchill_nodes.append(node)
-            debug_print(f"📋 发现加热搅拌器: {node}")
-    
-    debug_print(f"📊 共找到 {len(heatchill_nodes)} 个加热搅拌器")
-    
-    # 查找连接到容器的加热器
-    for heatchill in heatchill_nodes:
-        if G.has_edge(heatchill, vessel) or G.has_edge(vessel, heatchill):
-            debug_print(f"✅ 找到连接的加热搅拌器: {heatchill} 🔗")
-            return heatchill
-    
-    # 返回第一个加热器
-    if heatchill_nodes:
-        debug_print(f"⚠️ 未找到直接连接的加热搅拌器，使用第一个: {heatchill_nodes[0]} 🔄")
-        return heatchill_nodes[0]
-    
-    debug_print(f"❌ 未找到任何加热搅拌器")
-    return ""
-
-def find_connected_stirrer(G: nx.DiGraph, vessel: str) -> str:
-    """查找连接到指定容器的搅拌器"""
-    debug_print(f"🔍 查找连接到容器 '{vessel}' 的搅拌器...")
-    
-    stirrer_nodes = []
-    for node in G.nodes():
-        node_class = G.nodes[node].get('class', '').lower()
-        if 'stirrer' in node_class:
-            stirrer_nodes.append(node)
-            debug_print(f"📋 发现搅拌器: {node}")
-    
-    debug_print(f"📊 共找到 {len(stirrer_nodes)} 个搅拌器")
-    
-    # 查找连接到容器的搅拌器
-    for stirrer in stirrer_nodes:
-        if G.has_edge(stirrer, vessel) or G.has_edge(vessel, stirrer):
-            debug_print(f"✅ 找到连接的搅拌器: {stirrer} 🔗")
-            return stirrer
-    
-    # 返回第一个搅拌器
-    if stirrer_nodes:
-        debug_print(f"⚠️ 未找到直接连接的搅拌器，使用第一个: {stirrer_nodes[0]} 🔄")
-        return stirrer_nodes[0]
-    
-    debug_print(f"❌ 未找到任何搅拌器")
-    return ""
-
-def find_solid_dispenser(G: nx.DiGraph) -> str:
-    """查找固体加样器"""
-    debug_print(f"🔍 查找固体加样器...")
-    
-    for node in G.nodes():
-        node_class = G.nodes[node].get('class', '').lower()
-        if 'solid_dispenser' in node_class or 'dispenser' in node_class:
-            debug_print(f"✅ 找到固体加样器: {node} 🥄")
-            return node
-    
-    debug_print(f"❌ 未找到固体加样器")
-    return ""
-
 def generate_dissolve_protocol(
     G: nx.DiGraph,
     vessel: dict,  # 🔧 修改：从字符串改为字典类型
@@ -436,43 +53,21 @@ def generate_dissolve_protocol(
     - mol: "0.12 mol", "16.2 mmol"
     """
     
-    # 🔧 核心修改：从字典中提取容器ID
+    # 从字典中提取容器ID
     vessel_id, vessel_data = get_vessel(vessel)
-    
-    debug_print("=" * 60)
-    debug_print("🧪 开始生成溶解协议")
-    debug_print(f"📋 原始参数:")
-    debug_print(f"  🥼 vessel: {vessel} (ID: {vessel_id})")
-    debug_print(f"  💧 solvent: '{solvent}'")
-    debug_print(f"  📏 volume: {volume} (类型: {type(volume)})")
-    debug_print(f"  ⚖️ mass: {mass} (类型: {type(mass)})")
-    debug_print(f"  🌡️ temp: {temp} (类型: {type(temp)})")
-    debug_print(f"  ⏱️ time: {time} (类型: {type(time)})")
-    debug_print(f"  🧪 reagent: '{reagent}'")
-    debug_print(f"  🧬 mol: '{mol}'")
-    debug_print(f"  🎯 event: '{event}'")
-    debug_print(f"  📦 kwargs: {kwargs}")  # 显示额外参数
-    debug_print("=" * 60)
-    
+
+    debug_print(f"溶解协议: vessel={vessel_id}, solvent='{solvent}', volume={volume}, "
+                f"mass={mass}, temp={temp}, time={time}")
+
     action_sequence = []
-    
-    # === 参数验证 ===
-    debug_print("🔍 步骤1: 参数验证...")
-    action_sequence.append(create_action_log(f"开始溶解操作 - 容器: {vessel_id}", "🎬"))
-    
+
     if not vessel_id:
-        debug_print("❌ vessel 参数不能为空")
         raise ValueError("vessel 参数不能为空")
     
     if vessel_id not in G.nodes():
-        debug_print(f"❌ 容器 '{vessel_id}' 不存在于系统中")
         raise ValueError(f"容器 '{vessel_id}' 不存在于系统中")
-    
-    debug_print("✅ 基本参数验证通过")
-    action_sequence.append(create_action_log("参数验证通过", "✅"))
-    
-    # 🔧 新增：记录溶解前的容器状态
-    debug_print("🔍 记录溶解前容器状态...")
+
+    # 记录溶解前的容器状态
     original_liquid_volume = 0.0
     if "data" in vessel and "liquid_volume" in vessel["data"]:
         current_volume = vessel["data"]["liquid_volume"]
@@ -480,30 +75,16 @@ def generate_dissolve_protocol(
             original_liquid_volume = current_volume[0]
         elif isinstance(current_volume, (int, float)):
             original_liquid_volume = current_volume
-    debug_print(f"📊 溶解前液体体积: {original_liquid_volume:.2f}mL")
-    
-    # === 🔧 关键修复：参数解析 ===
-    debug_print("🔍 步骤2: 参数解析...")
-    action_sequence.append(create_action_log("正在解析溶解参数...", "🔍"))
-    
-    # 解析各种参数为数值
+
+    # === 参数解析 ===
     final_volume = parse_volume_input(volume)
     final_mass = parse_mass_input(mass)
     final_temp = parse_temperature_input(temp)
     final_time = parse_time_input(time)
-    
-    debug_print(f"📊 解析结果:")
-    debug_print(f"  📏 体积: {final_volume}mL")
-    debug_print(f"  ⚖️ 质量: {final_mass}g")
-    debug_print(f"  🌡️ 温度: {final_temp}°C")
-    debug_print(f"  ⏱️ 时间: {final_time}s")
-    debug_print(f"  🧪 试剂: '{reagent}'")
-    debug_print(f"  🧬 摩尔: '{mol}'")
-    debug_print(f"  🎯 事件: '{event}'")
-    
+
+    debug_print(f"参数解析: vol={final_volume}mL, mass={final_mass}g, temp={final_temp}°C, time={final_time}s")
+
     # === 判断溶解类型 ===
-    debug_print("🔍 步骤3: 判断溶解类型...")
-    action_sequence.append(create_action_log("正在判断溶解类型...", "🔍"))
     
     # 判断是固体溶解还是液体溶解
     is_solid_dissolve = (final_mass > 0 or (mol and mol.strip() != "") or (reagent and reagent.strip() != ""))
@@ -515,49 +96,31 @@ def generate_dissolve_protocol(
         final_volume = 50.0
         if not solvent:
             solvent = "water"  # 默认溶剂
-        debug_print("⚠️ 未明确指定溶解参数，默认为50mL水溶解")
+        debug_print("未明确指定溶解参数，默认为50mL水溶解")
     
     dissolve_type = "固体溶解" if is_solid_dissolve else "液体溶解"
-    dissolve_emoji = "🧂" if is_solid_dissolve else "💧"
-    debug_print(f"📋 溶解类型: {dissolve_type} {dissolve_emoji}")
-    
-    action_sequence.append(create_action_log(f"确定溶解类型: {dissolve_type} {dissolve_emoji}", "📋"))
-    
+    debug_print(f"溶解类型: {dissolve_type}")
+
+    action_sequence.append(create_action_log(f"溶解类型: {dissolve_type}", "📋"))
+
     # === 查找设备 ===
-    debug_print("🔍 步骤4: 查找设备...")
-    action_sequence.append(create_action_log("正在查找相关设备...", "🔍"))
-    
-    # 查找加热搅拌器
     heatchill_id = find_connected_heatchill(G, vessel_id)
     stirrer_id = find_connected_stirrer(G, vessel_id)
     
     # 优先使用加热搅拌器，否则使用独立搅拌器
     stir_device_id = heatchill_id or stirrer_id
-    
-    debug_print(f"📊 设备映射:")
-    debug_print(f"  🔥 加热器: '{heatchill_id}'")
-    debug_print(f"  🌪️ 搅拌器: '{stirrer_id}'")
-    debug_print(f"  🎯 使用设备: '{stir_device_id}'")
-    
-    if heatchill_id:
-        action_sequence.append(create_action_log(f"找到加热搅拌器: {heatchill_id}", "🔥"))
-    elif stirrer_id:
-        action_sequence.append(create_action_log(f"找到搅拌器: {stirrer_id}", "🌪️"))
-    else:
+    debug_print(f"设备: heatchill='{heatchill_id}', stirrer='{stirrer_id}'")
+
+    if not stir_device_id:
         action_sequence.append(create_action_log("未找到搅拌设备，将跳过搅拌", "⚠️"))
     
     # === 执行溶解流程 ===
-    debug_print("🔍 步骤5: 执行溶解流程...")
-    
     try:
-        # 步骤5.1: 启动加热搅拌（如果需要）
+        # 启动加热搅拌（如果需要）
         if stir_device_id and (final_temp > 25.0 or final_time > 0 or stir_speed > 0):
-            debug_print(f"🔍 5.1: 启动加热搅拌，温度: {final_temp}°C")
-            action_sequence.append(create_action_log(f"准备加热搅拌 (目标温度: {final_temp}°C)", "🔥"))
-            
+
             if heatchill_id and (final_temp > 25.0 or final_time > 0):
                 # 使用加热搅拌器
-                action_sequence.append(create_action_log(f"启动加热搅拌器 {heatchill_id}", "🔥"))
                 
                 heatchill_action = {
                     "device_id": heatchill_id,
@@ -573,7 +136,6 @@ def generate_dissolve_protocol(
                 # 等待温度稳定
                 if final_temp > 25.0:
                     wait_time = min(60, abs(final_temp - 25.0) * 1.5)
-                    action_sequence.append(create_action_log(f"等待温度稳定 ({wait_time:.0f}秒)", "⏳"))
                     action_sequence.append({
                         "action_name": "wait",
                         "action_kwargs": {"time": wait_time}
@@ -581,7 +143,6 @@ def generate_dissolve_protocol(
             
             elif stirrer_id:
                 # 使用独立搅拌器
-                action_sequence.append(create_action_log(f"启动搅拌器 {stirrer_id} (速度: {stir_speed}rpm)", "🌪️"))
                 
                 stir_action = {
                     "device_id": stirrer_id,
@@ -593,9 +154,8 @@ def generate_dissolve_protocol(
                     }
                 }
                 action_sequence.append(stir_action)
-                
+
                 # 等待搅拌稳定
-                action_sequence.append(create_action_log("等待搅拌稳定...", "⏳"))
                 action_sequence.append({
                     "action_name": "wait",
                     "action_kwargs": {"time": 5}
@@ -603,12 +163,8 @@ def generate_dissolve_protocol(
         
         if is_solid_dissolve:
             # === 固体溶解路径 ===
-            debug_print(f"🔍 5.2: 使用固体溶解路径")
-            action_sequence.append(create_action_log("开始固体溶解流程", "🧂"))
-            
             solid_dispenser = find_solid_dispenser(G)
             if solid_dispenser:
-                action_sequence.append(create_action_log(f"找到固体加样器: {solid_dispenser}", "🥄"))
                 
                 # 固体加样
                 add_kwargs = {
@@ -620,42 +176,27 @@ def generate_dissolve_protocol(
                 
                 if final_mass > 0:
                     add_kwargs["mass"] = str(final_mass)
-                    action_sequence.append(create_action_log(f"准备添加固体: {final_mass}g", "⚖️"))
                 if mol and mol.strip():
                     add_kwargs["mol"] = mol
-                    action_sequence.append(create_action_log(f"按摩尔数添加: {mol}", "🧬"))
-                
-                action_sequence.append(create_action_log("开始固体加样操作", "🥄"))
+
                 action_sequence.append({
                     "device_id": solid_dispenser,
                     "action_name": "add_solid",
                     "action_kwargs": add_kwargs
                 })
-                
-                debug_print(f"✅ 固体加样完成")
-                action_sequence.append(create_action_log("固体加样完成", "✅"))
-                
-                # 🔧 新增：固体溶解体积运算 - 固体本身不会显著增加体积，但可能有少量变化
-                debug_print(f"🔧 固体溶解 - 体积变化很小，主要是质量变化")
-                # 固体通常不会显著改变液体体积，这里只记录日志
-                action_sequence.append(create_action_log(f"固体已添加: {final_mass}g", "📊"))
+
+                # 固体溶解体积运算 - 固体本身不会显著增加体积
                 
             else:
-                debug_print("⚠️ 未找到固体加样器，跳过固体添加")
+                debug_print("未找到固体加样器，跳过固体添加")
                 action_sequence.append(create_action_log("未找到固体加样器，无法添加固体", "❌"))
         
         elif is_liquid_dissolve:
             # === 液体溶解路径 ===
-            debug_print(f"🔍 5.3: 使用液体溶解路径")
-            action_sequence.append(create_action_log("开始液体溶解流程", "💧"))
-            
-            # 查找溶剂容器
-            action_sequence.append(create_action_log("正在查找溶剂容器...", "🔍"))
             try:
                 solvent_vessel = find_solvent_vessel(G, solvent)
-                action_sequence.append(create_action_log(f"找到溶剂容器: {solvent_vessel}", "🧪"))
             except ValueError as e:
-                debug_print(f"⚠️ {str(e)}，跳过溶剂添加")
+                debug_print(f"溶剂容器查找失败: {str(e)}，跳过溶剂添加")
                 action_sequence.append(create_action_log(f"溶剂容器查找失败: {str(e)}", "❌"))
                 solvent_vessel = None
             
@@ -663,10 +204,7 @@ def generate_dissolve_protocol(
                 # 计算流速 - 溶解时通常用较慢的速度，避免飞溅
                 flowrate = 1.0  # 较慢的注入速度
                 transfer_flowrate = 0.5  # 较慢的转移速度
-                
-                action_sequence.append(create_action_log(f"设置流速: {flowrate}mL/min (缓慢注入)", "⚡"))
-                action_sequence.append(create_action_log(f"开始转移 {final_volume}mL {solvent}", "🚰"))
-                
+
                 # 调用pump protocol
                 pump_actions = generate_pump_protocol_with_rinsing(
                     G=G,
@@ -688,12 +226,9 @@ def generate_dissolve_protocol(
                     **kwargs
                 )
                 action_sequence.extend(pump_actions)
-                debug_print(f"✅ 溶剂转移完成，添加了 {len(pump_actions)} 个动作")
-                action_sequence.append(create_action_log(f"溶剂转移完成 ({len(pump_actions)} 个操作)", "✅"))
-                
-                # 🔧 新增：液体溶解体积运算 - 添加溶剂后更新容器体积
-                debug_print(f"🔧 更新容器液体体积 - 添加溶剂 {final_volume:.2f}mL")
-                
+
+                # 液体溶解体积运算 - 添加溶剂后更新容器体积
+
                 # 确保vessel有data字段
                 if "data" not in vessel:
                     vessel["data"] = {}
@@ -703,19 +238,14 @@ def generate_dissolve_protocol(
                     if isinstance(current_volume, list):
                         if len(current_volume) > 0:
                             vessel["data"]["liquid_volume"][0] += final_volume
-                            debug_print(f"📊 添加溶剂后体积: {vessel['data']['liquid_volume'][0]:.2f}mL (+{final_volume:.2f}mL)")
                         else:
                             vessel["data"]["liquid_volume"] = [final_volume]
-                            debug_print(f"📊 初始化溶解体积: {final_volume:.2f}mL")
                     elif isinstance(current_volume, (int, float)):
                         vessel["data"]["liquid_volume"] += final_volume
-                        debug_print(f"📊 添加溶剂后体积: {vessel['data']['liquid_volume']:.2f}mL (+{final_volume:.2f}mL)")
                     else:
                         vessel["data"]["liquid_volume"] = final_volume
-                        debug_print(f"📊 重置体积为: {final_volume:.2f}mL")
                 else:
                     vessel["data"]["liquid_volume"] = final_volume
-                    debug_print(f"📊 创建新体积记录: {final_volume:.2f}mL")
                 
                 # 🔧 同时更新图中的容器数据
                 if vessel_id in G.nodes():
@@ -732,27 +262,19 @@ def generate_dissolve_protocol(
                             G.nodes[vessel_id]['data']['liquid_volume'] = [final_volume]
                     else:
                         G.nodes[vessel_id]['data']['liquid_volume'] = current_node_volume + final_volume
-                    
-                    debug_print(f"✅ 图节点体积数据已更新")
-                
-                action_sequence.append(create_action_log(f"容器体积已更新 (+{final_volume:.2f}mL)", "📊"))
-                
+
                 # 溶剂添加后等待
-                action_sequence.append(create_action_log("溶剂添加后短暂等待...", "⏳"))
                 action_sequence.append({
                     "action_name": "wait",
                     "action_kwargs": {"time": 5}
                 })
         
-        # 步骤5.4: 等待溶解完成
+        # 等待溶解完成
         if final_time > 0:
-            debug_print(f"🔍 5.4: 等待溶解完成 - {final_time}s")
             wait_minutes = final_time / 60
-            action_sequence.append(create_action_log(f"开始溶解等待 ({wait_minutes:.1f}分钟)", "⏰"))
-            
+
             if heatchill_id:
                 # 使用定时加热搅拌
-                action_sequence.append(create_action_log(f"使用加热搅拌器进行定时溶解", "🔥"))
                 
                 dissolve_action = {
                     "device_id": heatchill_id,
@@ -770,7 +292,6 @@ def generate_dissolve_protocol(
             
             elif stirrer_id:
                 # 使用定时搅拌
-                action_sequence.append(create_action_log(f"使用搅拌器进行定时溶解", "🌪️"))
                 
                 stir_action = {
                     "device_id": stirrer_id,
@@ -787,7 +308,6 @@ def generate_dissolve_protocol(
             
             else:
                 # 简单等待
-                action_sequence.append(create_action_log(f"简单等待溶解完成", "⏳"))
                 action_sequence.append({
                     "action_name": "wait",
                     "action_kwargs": {"time": final_time}
@@ -795,9 +315,7 @@ def generate_dissolve_protocol(
         
         # 步骤5.5: 停止加热搅拌（如果需要）
         if heatchill_id and final_time == 0 and final_temp > 25.0:
-            debug_print(f"🔍 5.5: 停止加热器")
-            action_sequence.append(create_action_log("停止加热搅拌器", "🛑"))
-            
+
             stop_action = {
                 "device_id": heatchill_id,
                 "action_name": "heat_chill_stop",
@@ -808,7 +326,7 @@ def generate_dissolve_protocol(
             action_sequence.append(stop_action)
         
     except Exception as e:
-        debug_print(f"❌ 溶解流程执行失败: {str(e)}")
+        debug_print(f"溶解流程执行失败: {str(e)}")
         action_sequence.append(create_action_log(f"溶解流程失败: {str(e)}", "❌"))
         # 添加错误日志
         action_sequence.append({
@@ -829,23 +347,8 @@ def generate_dissolve_protocol(
             final_liquid_volume = current_volume
     
     # === 最终结果 ===
-    debug_print("=" * 60)
-    debug_print(f"🎉 溶解协议生成完成")
-    debug_print(f"📊 协议统计:")
-    debug_print(f"  📋 总动作数: {len(action_sequence)}")
-    debug_print(f"  🥼 容器: {vessel_id}")
-    debug_print(f"  {dissolve_emoji} 溶解类型: {dissolve_type}")
-    if is_liquid_dissolve:
-        debug_print(f"  💧 溶剂: {solvent} ({final_volume}mL)")
-    if is_solid_dissolve:
-        debug_print(f"  🧪 试剂: {reagent}")
-        debug_print(f"  ⚖️ 质量: {final_mass}g")
-        debug_print(f"  🧬 摩尔: {mol}")
-    debug_print(f"  🌡️ 温度: {final_temp}°C")
-    debug_print(f"  ⏱️ 时间: {final_time}s")
-    debug_print(f"  📊 溶解前体积: {original_liquid_volume:.2f}mL")
-    debug_print(f"  📊 溶解后体积: {final_liquid_volume:.2f}mL")
-    debug_print("=" * 60)
+    debug_print(f"溶解协议完成: {vessel_id}, 类型={dissolve_type}, "
+                f"动作数={len(action_sequence)}, 体积={original_liquid_volume:.2f}→{final_liquid_volume:.2f}mL")
     
     # 添加完成日志
     summary_msg = f"溶解协议完成: {vessel_id}"
@@ -854,7 +357,7 @@ def generate_dissolve_protocol(
     if is_solid_dissolve:
         summary_msg += f" (溶解 {final_mass}g {reagent})"
     
-    action_sequence.append(create_action_log(summary_msg, "🎉"))
+    action_sequence.append(create_action_log(summary_msg, "✅"))
     
     return action_sequence
 
@@ -866,7 +369,7 @@ def dissolve_solid_by_mass(G: nx.DiGraph, vessel: dict, reagent: str, mass: Unio
                           temp: Union[str, float] = 25.0, time: Union[str, float] = "10 min") -> List[Dict[str, Any]]:
     """按质量溶解固体"""
     vessel_id = vessel["id"]
-    debug_print(f"🧂 快速固体溶解: {reagent} ({mass}) → {vessel_id}")
+    debug_print(f"快速固体溶解: {reagent} ({mass}) → {vessel_id}")
     return generate_dissolve_protocol(
         G, vessel, 
         mass=mass, 
@@ -879,7 +382,7 @@ def dissolve_solid_by_moles(G: nx.DiGraph, vessel: dict, reagent: str, mol: str,
                            temp: Union[str, float] = 25.0, time: Union[str, float] = "10 min") -> List[Dict[str, Any]]:
     """按摩尔数溶解固体"""
     vessel_id = vessel["id"]
-    debug_print(f"🧬 按摩尔数溶解固体: {reagent} ({mol}) → {vessel_id}")
+    debug_print(f"按摩尔数溶解固体: {reagent} ({mol}) → {vessel_id}")
     return generate_dissolve_protocol(
         G, vessel, 
         mol=mol, 
@@ -892,7 +395,7 @@ def dissolve_with_solvent(G: nx.DiGraph, vessel: dict, solvent: str, volume: Uni
                          temp: Union[str, float] = 25.0, time: Union[str, float] = "5 min") -> List[Dict[str, Any]]:
     """用溶剂溶解"""
     vessel_id = vessel["id"]
-    debug_print(f"💧 溶剂溶解: {solvent} ({volume}) → {vessel_id}")
+    debug_print(f"溶剂溶解: {solvent} ({volume}) → {vessel_id}")
     return generate_dissolve_protocol(
         G, vessel, 
         solvent=solvent, 
@@ -904,7 +407,7 @@ def dissolve_with_solvent(G: nx.DiGraph, vessel: dict, solvent: str, volume: Uni
 def dissolve_at_room_temp(G: nx.DiGraph, vessel: dict, solvent: str, volume: Union[str, float]) -> List[Dict[str, Any]]:
     """室温溶解"""
     vessel_id = vessel["id"]
-    debug_print(f"🌡️ 室温溶解: {solvent} ({volume}) → {vessel_id}")
+    debug_print(f"室温溶解: {solvent} ({volume}) → {vessel_id}")
     return generate_dissolve_protocol(
         G, vessel, 
         solvent=solvent, 
@@ -917,7 +420,7 @@ def dissolve_with_heating(G: nx.DiGraph, vessel: dict, solvent: str, volume: Uni
                          temp: Union[str, float] = "60 °C", time: Union[str, float] = "15 min") -> List[Dict[str, Any]]:
     """加热溶解"""
     vessel_id = vessel["id"]
-    debug_print(f"🔥 加热溶解: {solvent} ({volume}) → {vessel_id} @ {temp}")
+    debug_print(f"加热溶解: {solvent} ({volume}) → {vessel_id} @ {temp}")
     return generate_dissolve_protocol(
         G, vessel, 
         solvent=solvent, 
@@ -929,37 +432,31 @@ def dissolve_with_heating(G: nx.DiGraph, vessel: dict, solvent: str, volume: Uni
 # 测试函数
 def test_dissolve_protocol():
     """测试溶解协议的各种参数解析"""
-    debug_print("=== DISSOLVE PROTOCOL 增强版测试 ===")
-    
     # 测试体积解析
-    debug_print("💧 测试体积解析...")
     volumes = ["10 mL", "?", 10.0, "1 L", "500 μL"]
     for vol in volumes:
         result = parse_volume_input(vol)
-        debug_print(f"📏 体积解析: {vol} → {result}mL")
-    
+        debug_print(f"体积解析: {vol} → {result}mL")
+
     # 测试质量解析
-    debug_print("⚖️ 测试质量解析...")
     masses = ["2.9 g", "?", 2.5, "500 mg"]
     for mass in masses:
         result = parse_mass_input(mass)
-        debug_print(f"⚖️ 质量解析: {mass} → {result}g")
-    
+        debug_print(f"质量解析: {mass} → {result}g")
+
     # 测试温度解析
-    debug_print("🌡️ 测试温度解析...")
     temps = ["60 °C", "room temperature", "?", 25.0, "reflux"]
     for temp in temps:
         result = parse_temperature_input(temp)
-        debug_print(f"🌡️ 温度解析: {temp} → {result}°C")
-    
+        debug_print(f"温度解析: {temp} → {result}°C")
+
     # 测试时间解析
-    debug_print("⏱️ 测试时间解析...")
     times = ["30 min", "1 h", "?", 60.0]
     for time in times:
         result = parse_time_input(time)
-        debug_print(f"⏱️ 时间解析: {time} → {result}s")
-    
-    debug_print("✅ 测试完成")
+        debug_print(f"时间解析: {time} → {result}s")
+
+    debug_print("测试完成")
 
 if __name__ == "__main__":
     test_dissolve_protocol()

unilabos/compile/dry_protocol.py

@@ -1,87 +1,40 @@
 import networkx as nx
 from typing import List, Dict, Any
 
-from unilabos.compile.utils.vessel_parser import get_vessel
-
-
-def find_connected_heater(G: nx.DiGraph, vessel: str) -> str:
-    """
-    查找与容器相连的加热器
-    
-    Args:
-        G: 网络图
-        vessel: 容器名称
-    
-    Returns:
-        str: 加热器ID，如果没有则返回None
-    """
-    print(f"DRY: 正在查找与容器 '{vessel}' 相连的加热器...")
-    
-    # 查找所有加热器节点
-    heater_nodes = [node for node in G.nodes() 
-                   if ('heater' in node.lower() or 
-                       'heat' in node.lower() or
-                       G.nodes[node].get('class') == 'virtual_heatchill' or
-                       G.nodes[node].get('type') == 'heater')]
-    
-    print(f"DRY: 找到的加热器节点: {heater_nodes}")
-    
-    # 检查是否有加热器与目标容器相连
-    for heater in heater_nodes:
-        if G.has_edge(heater, vessel) or G.has_edge(vessel, heater):
-            print(f"DRY: 找到与容器 '{vessel}' 相连的加热器: {heater}")
-            return heater
-    
-    # 如果没有直接连接，查找距离最近的加热器
-    for heater in heater_nodes:
-        try:
-            path = nx.shortest_path(G, source=heater, target=vessel)
-            if len(path) <= 3:  # 最多2个中间节点
-                print(f"DRY: 找到距离较近的加热器: {heater}, 路径: {' → '.join(path)}")
-                return heater
-        except nx.NetworkXNoPath:
-            continue
-    
-    print(f"DRY: 未找到与容器 '{vessel}' 相连的加热器")
-    return None
+from .utils.vessel_parser import get_vessel, find_connected_heatchill
+from .utils.logger_util import debug_print
 
 
 def generate_dry_protocol(
     G: nx.DiGraph,
-    vessel: dict,  # 🔧 修改：从字符串改为字典类型
-    compound: str = "",  # 🔧 修改：参数顺序调整，并设置默认值
-    **kwargs  # 接收其他可能的参数但不使用
+    vessel: dict,
+    compound: str = "",
+    **kwargs
 ) -> List[Dict[str, Any]]:
     """
     生成干燥协议序列
-    
+
     Args:
         G: 有向图，节点为容器和设备
         vessel: 目标容器字典（从XDL传入）
         compound: 化合物名称（从XDL传入，可选）
         **kwargs: 其他可选参数，但不使用
-    
+
     Returns:
         List[Dict[str, Any]]: 动作序列
     """
-    # 🔧 核心修改：从字典中提取容器ID
     vessel_id, vessel_data = get_vessel(vessel)
-    
+
     action_sequence = []
-    
+
     # 默认参数
-    dry_temp = 60.0  # 默认干燥温度 60°C
-    dry_time = 3600.0  # 默认干燥时间 1小时（3600秒）
-    simulation_time = 60.0  # 模拟时间 1分钟
-    
-    print(f"🌡️ DRY: 开始生成干燥协议 ✨")
-    print(f"  🥽 vessel: {vessel} (ID: {vessel_id})")
-    print(f"  🧪 化合物: {compound or '未指定'}")
-    print(f"  🔥 干燥温度: {dry_temp}°C")
-    print(f"  ⏰ 干燥时间: {dry_time/60:.0f} 分钟")
-    
-    # 🔧 新增：记录干燥前的容器状态
-    print(f"🔍 记录干燥前容器状态...")
+    dry_temp = 60.0
+    dry_time = 3600.0
+    simulation_time = 60.0
+
+    debug_print(f"开始生成干燥协议: vessel={vessel_id}, compound={compound or '未指定'}, temp={dry_temp}°C")
+
+    # 记录干燥前的容器状态
     original_liquid_volume = 0.0
     if "data" in vessel and "liquid_volume" in vessel["data"]:
         current_volume = vessel["data"]["liquid_volume"]
@@ -89,39 +42,30 @@ def generate_dry_protocol(
             original_liquid_volume = current_volume[0]
         elif isinstance(current_volume, (int, float)):
             original_liquid_volume = current_volume
-    print(f"📊 干燥前液体体积: {original_liquid_volume:.2f}mL")
-    
+
     # 1. 验证目标容器存在
-    print(f"\n📋 步骤1: 验证目标容器 '{vessel_id}' 是否存在...")
     if vessel_id not in G.nodes():
-        print(f"⚠️ DRY: 警告 - 容器 '{vessel_id}' 不存在于系统中，跳过干燥 😢")
+        debug_print(f"容器 '{vessel_id}' 不存在于系统中，跳过干燥")
         return action_sequence
-    print(f"✅ 容器 '{vessel_id}' 验证通过!")
-    
+
     # 2. 查找相连的加热器
-    print(f"\n🔍 步骤2: 查找与容器相连的加热器...")
-    heater_id = find_connected_heater(G, vessel_id)  # 🔧 使用 vessel_id
-    
+    heater_id = find_connected_heatchill(G, vessel_id)
+
     if heater_id is None:
-        print(f"😭 DRY: 警告 - 未找到与容器 '{vessel_id}' 相连的加热器，跳过干燥")
-        print(f"🎭 添加模拟干燥动作...")
-        # 添加一个等待动作，表示干燥过程（模拟）
+        debug_print(f"未找到与容器 '{vessel_id}' 相连的加热器，添加模拟干燥动作")
         action_sequence.append({
             "action_name": "wait",
             "action_kwargs": {
-                "time": 10.0,  # 模拟等待时间
+                "time": 10.0,
                 "description": f"模拟干燥 {compound or '化合物'} (无加热器可用)"
             }
         })
-        
-        # 🔧 新增：模拟干燥的体积变化（溶剂蒸发）
-        print(f"🔧 模拟干燥过程的体积减少...")
+
+        # 模拟干燥的体积变化
         if original_liquid_volume > 0:
-            # 假设干燥过程中损失10%的体积（溶剂蒸发）
             volume_loss = original_liquid_volume * 0.1
             new_volume = max(0.0, original_liquid_volume - volume_loss)
-            
-            # 更新vessel字典中的体积
+
             if "data" in vessel and "liquid_volume" in vessel["data"]:
                 current_volume = vessel["data"]["liquid_volume"]
                 if isinstance(current_volume, list):
@@ -133,15 +77,14 @@ def generate_dry_protocol(
                     vessel["data"]["liquid_volume"] = new_volume
                 else:
                     vessel["data"]["liquid_volume"] = new_volume
-            
-            # 🔧 同时更新图中的容器数据
+
             if vessel_id in G.nodes():
                 if 'data' not in G.nodes[vessel_id]:
                     G.nodes[vessel_id]['data'] = {}
-                
+
                 vessel_node_data = G.nodes[vessel_id]['data']
                 current_node_volume = vessel_node_data.get('liquid_volume', 0.0)
-                
+
                 if isinstance(current_node_volume, list):
                     if len(current_node_volume) > 0:
                         G.nodes[vessel_id]['data']['liquid_volume'][0] = new_volume
@@ -149,33 +92,27 @@ def generate_dry_protocol(
                         G.nodes[vessel_id]['data']['liquid_volume'] = [new_volume]
                 else:
                     G.nodes[vessel_id]['data']['liquid_volume'] = new_volume
-            
-            print(f"📊 模拟干燥体积变化: {original_liquid_volume:.2f}mL → {new_volume:.2f}mL (-{volume_loss:.2f}mL)")
-        
-        print(f"📄 DRY: 协议生成完成，共 {len(action_sequence)} 个动作 🎯")
+
+            debug_print(f"模拟干燥体积变化: {original_liquid_volume:.2f}mL -> {new_volume:.2f}mL")
+
+        debug_print(f"协议生成完成，共 {len(action_sequence)} 个动作")
         return action_sequence
-    
-    print(f"🎉 找到加热器: {heater_id}!")
-    
+
+    debug_print(f"找到加热器: {heater_id}")
+
     # 3. 启动加热器进行干燥
-    print(f"\n🚀 步骤3: 开始执行干燥流程...")
-    print(f"🔥 启动加热器 {heater_id} 进行干燥")
-    
     # 3.1 启动加热
-    print(f"  ⚡ 动作1: 启动加热到 {dry_temp}°C...")
     action_sequence.append({
         "device_id": heater_id,
         "action_name": "heat_chill_start",
         "action_kwargs": {
-            "vessel": {"id": vessel_id},  # 🔧 使用 vessel_id
+            "vessel": {"id": vessel_id},
             "temp": dry_temp,
             "purpose": f"干燥 {compound or '化合物'}"
         }
     })
-    print(f"  ✅ 加热器启动命令已添加 🔥")
-    
+
     # 3.2 等待温度稳定
-    print(f"  ⏳ 动作2: 等待温度稳定...")
     action_sequence.append({
         "action_name": "wait",
         "action_kwargs": {
@@ -183,34 +120,27 @@ def generate_dry_protocol(
             "description": f"等待温度稳定到 {dry_temp}°C"
         }
     })
-    print(f"  ✅ 温度稳定等待命令已添加 🌡️")
-    
+
     # 3.3 保持干燥温度
-    print(f"  🔄 动作3: 保持干燥温度 {simulation_time/60:.0f} 分钟...")
     action_sequence.append({
         "device_id": heater_id,
         "action_name": "heat_chill",
         "action_kwargs": {
-            "vessel": {"id": vessel_id},  # 🔧 使用 vessel_id
+            "vessel": {"id": vessel_id},
             "temp": dry_temp,
             "time": simulation_time,
             "purpose": f"干燥 {compound or '化合物'}，保持温度 {dry_temp}°C"
         }
     })
-    print(f"  ✅ 温度保持命令已添加 🌡️⏰")
-    
-    # 🔧 新增：干燥过程中的体积变化计算
-    print(f"🔧 计算干燥过程中的体积变化...")
+
+    # 干燥过程中的体积变化计算
     if original_liquid_volume > 0:
-        # 干燥过程中，溶剂会蒸发，固体保留
-        # 根据温度和时间估算蒸发量
-        evaporation_rate = 0.001 * dry_temp  # 每秒每°C蒸发0.001mL
-        total_evaporation = min(original_liquid_volume * 0.8, 
-                               evaporation_rate * simulation_time)  # 最多蒸发80%
-        
+        evaporation_rate = 0.001 * dry_temp
+        total_evaporation = min(original_liquid_volume * 0.8,
+                               evaporation_rate * simulation_time)
+
         new_volume = max(0.0, original_liquid_volume - total_evaporation)
-        
-        # 更新vessel字典中的体积
+
         if "data" in vessel and "liquid_volume" in vessel["data"]:
             current_volume = vessel["data"]["liquid_volume"]
             if isinstance(current_volume, list):
@@ -222,15 +152,14 @@ def generate_dry_protocol(
                 vessel["data"]["liquid_volume"] = new_volume
             else:
                 vessel["data"]["liquid_volume"] = new_volume
-        
-        # 🔧 同时更新图中的容器数据
+
         if vessel_id in G.nodes():
             if 'data' not in G.nodes[vessel_id]:
                 G.nodes[vessel_id]['data'] = {}
-            
+
             vessel_node_data = G.nodes[vessel_id]['data']
             current_node_volume = vessel_node_data.get('liquid_volume', 0.0)
-            
+
             if isinstance(current_node_volume, list):
                 if len(current_node_volume) > 0:
                     G.nodes[vessel_id]['data']['liquid_volume'][0] = new_volume
@@ -238,37 +167,29 @@ def generate_dry_protocol(
                     G.nodes[vessel_id]['data']['liquid_volume'] = [new_volume]
             else:
                 G.nodes[vessel_id]['data']['liquid_volume'] = new_volume
-        
-        print(f"📊 干燥体积变化计算:")
-        print(f"  - 初始体积: {original_liquid_volume:.2f}mL")
-        print(f"  - 蒸发量: {total_evaporation:.2f}mL")
-        print(f"  - 剩余体积: {new_volume:.2f}mL")
-        print(f"  - 蒸发率: {(total_evaporation/original_liquid_volume*100):.1f}%")
-    
+
+        debug_print(f"干燥体积变化: {original_liquid_volume:.2f}mL -> {new_volume:.2f}mL (-{total_evaporation:.2f}mL)")
+
     # 3.4 停止加热
-    print(f"  ⏹️ 动作4: 停止加热...")
     action_sequence.append({
         "device_id": heater_id,
         "action_name": "heat_chill_stop",
         "action_kwargs": {
-            "vessel": {"id": vessel_id},  # 🔧 使用 vessel_id
+            "vessel": {"id": vessel_id},
             "purpose": f"干燥完成，停止加热"
         }
     })
-    print(f"  ✅ 停止加热命令已添加 🛑")
-    
+
     # 3.5 等待冷却
-    print(f"  ❄️ 动作5: 等待冷却...")
     action_sequence.append({
         "action_name": "wait",
         "action_kwargs": {
-            "time": 10.0,  # 等待10秒冷却
+            "time": 10.0,
             "description": f"等待 {compound or '化合物'} 冷却"
         }
     })
-    print(f"  ✅ 冷却等待命令已添加 🧊")
-    
-    # 🔧 新增：干燥完成后的状态报告
+
+    # 最终状态
     final_liquid_volume = 0.0
     if "data" in vessel and "liquid_volume" in vessel["data"]:
         current_volume = vessel["data"]["liquid_volume"]
@@ -276,60 +197,37 @@ def generate_dry_protocol(
             final_liquid_volume = current_volume[0]
         elif isinstance(current_volume, (int, float)):
             final_liquid_volume = current_volume
-    
-    print(f"\n🎊 DRY: 协议生成完成，共 {len(action_sequence)} 个动作 🎯")
-    print(f"⏱️ DRY: 预计总时间: {(simulation_time + 30)/60:.0f} 分钟 ⌛")
-    print(f"📊 干燥结果:")
-    print(f"  - 容器: {vessel_id}")
-    print(f"  - 化合物: {compound or '未指定'}")
-    print(f"  - 干燥前体积: {original_liquid_volume:.2f}mL")
-    print(f"  - 干燥后体积: {final_liquid_volume:.2f}mL")
-    print(f"  - 蒸发体积: {(original_liquid_volume - final_liquid_volume):.2f}mL")
-    print(f"🏁 所有动作序列准备就绪! ✨")
-    
+
+    debug_print(f"干燥协议生成完成: {len(action_sequence)} 个动作, 体积 {original_liquid_volume:.2f} -> {final_liquid_volume:.2f}mL")
+
     return action_sequence
 
 
-# 🔧 新增：便捷函数
-def generate_quick_dry_protocol(G: nx.DiGraph, vessel: dict, compound: str = "", 
+# 便捷函数
+def generate_quick_dry_protocol(G: nx.DiGraph, vessel: dict, compound: str = "",
                                temp: float = 40.0, time: float = 30.0) -> List[Dict[str, Any]]:
     """快速干燥：低温短时间"""
-    vessel_id = vessel["id"]
-    print(f"🌡️ 快速干燥: {compound or '化合物'} → {vessel_id} @ {temp}°C ({time}min)")
-    
-    # 临时修改默认参数
-    import types
-    temp_func = types.FunctionType(
-        generate_dry_protocol.__code__, 
-        generate_dry_protocol.__globals__
-    )
-    
-    # 直接调用原函数，但修改内部参数
     return generate_dry_protocol(G, vessel, compound)
 
 
-def generate_thorough_dry_protocol(G: nx.DiGraph, vessel: dict, compound: str = "", 
+def generate_thorough_dry_protocol(G: nx.DiGraph, vessel: dict, compound: str = "",
                                   temp: float = 80.0, time: float = 120.0) -> List[Dict[str, Any]]:
     """深度干燥：高温长时间"""
-    vessel_id = vessel["id"]
-    print(f"🔥 深度干燥: {compound or '化合物'} → {vessel_id} @ {temp}°C ({time}min)")
     return generate_dry_protocol(G, vessel, compound)
 
 
-def generate_gentle_dry_protocol(G: nx.DiGraph, vessel: dict, compound: str = "", 
+def generate_gentle_dry_protocol(G: nx.DiGraph, vessel: dict, compound: str = "",
                                 temp: float = 30.0, time: float = 180.0) -> List[Dict[str, Any]]:
     """温和干燥：低温长时间"""
-    vessel_id = vessel["id"]
-    print(f"🌡️ 温和干燥: {compound or '化合物'} → {vessel_id} @ {temp}°C ({time}min)")
     return generate_dry_protocol(G, vessel, compound)
 
 
 # 测试函数
 def test_dry_protocol():
     """测试干燥协议"""
-    print("=== DRY PROTOCOL 测试 ===")
-    print("测试完成")
+    debug_print("=== DRY PROTOCOL 测试 ===")
+    debug_print("测试完成")
 
 
 if __name__ == "__main__":
-    test_dry_protocol()
+    test_dry_protocol()

unilabos/compile/evacuateandrefill_protocol.py

@@ -3,38 +3,14 @@ from functools import partial
 import networkx as nx
 import logging
 import uuid
-import sys
 from typing import List, Dict, Any, Optional
-from .utils.vessel_parser import get_vessel
-from .utils.logger_util import action_log
+from .utils.vessel_parser import get_vessel, find_connected_stirrer
+from .utils.logger_util import debug_print, action_log
 from .pump_protocol import generate_pump_protocol_with_rinsing, generate_pump_protocol
 
 # 设置日志
 logger = logging.getLogger(__name__)
 
-# 确保输出编码为UTF-8
-if hasattr(sys.stdout, 'reconfigure'):
-    try:
-        sys.stdout.reconfigure(encoding='utf-8')
-        sys.stderr.reconfigure(encoding='utf-8')
-    except:
-        pass
-
-def debug_print(message):
-    """调试输出函数 - 支持中文"""
-    try:
-        # 确保消息是字符串格式
-        safe_message = str(message)
-        logger.info(f"[抽真空充气] {safe_message}")
-    except UnicodeEncodeError:
-        # 如果编码失败，尝试替换不支持的字符
-        safe_message = str(message).encode('utf-8', errors='replace').decode('utf-8')
-        logger.info(f"[抽真空充气] {safe_message}")
-    except Exception as e:
-        # 最后的安全措施
-        fallback_message = f"日志输出错误: {repr(message)}"
-        logger.info(f"[抽真空充气] {fallback_message}")
-
 create_action_log = partial(action_log, prefix="[抽真空充气]")
 
 def find_gas_source(G: nx.DiGraph, gas: str) -> str:
@@ -44,10 +20,9 @@ def find_gas_source(G: nx.DiGraph, gas: str) -> str:
     2. 气体类型匹配（data.gas_type）
     3. 默认气源
     """
-    debug_print(f"🔍 正在查找气体 '{gas}' 的气源...")
-    
-    # 第一步：通过容器名称匹配
-    debug_print(f"📋 方法1: 容器名称匹配...")
+    debug_print(f"正在查找气体 '{gas}' 的气源...")
+
+    # 通过容器名称匹配
     gas_source_patterns = [
         f"gas_source_{gas}",
         f"gas_{gas}",
@@ -57,254 +32,178 @@ def find_gas_source(G: nx.DiGraph, gas: str) -> str:
         f"reagent_bottle_{gas}",
         f"bottle_{gas}"
     ]
-    
-    debug_print(f"🎯 尝试的容器名称: {gas_source_patterns}")
-    
+
     for pattern in gas_source_patterns:
         if pattern in G.nodes():
-            debug_print(f"✅ 通过名称找到气源: {pattern}")
+            debug_print(f"通过名称找到气源: {pattern}")
             return pattern
-    
-    # 第二步：通过气体类型匹配 (data.gas_type)
-    debug_print(f"📋 方法2: 气体类型匹配...")
+
+    # 通过气体类型匹配 (data.gas_type)
     for node_id in G.nodes():
         node_data = G.nodes[node_id]
         node_class = node_data.get('class', '') or ''
-        
-        # 检查是否是气源设备
-        if ('gas_source' in node_class or 
-            'gas' in node_id.lower() or 
+
+        if ('gas_source' in node_class or
+            'gas' in node_id.lower() or
             node_id.startswith('flask_')):
-            
-            # 检查 data.gas_type
+
             data = node_data.get('data', {})
             gas_type = data.get('gas_type', '')
-            
+
             if gas_type.lower() == gas.lower():
-                debug_print(f"✅ 通过气体类型找到气源: {node_id} (气体类型: {gas_type})")
+                debug_print(f"通过气体类型找到气源: {node_id} (气体类型: {gas_type})")
                 return node_id
-            
-            # 检查 config.gas_type  
+
             config = node_data.get('config', {})
             config_gas_type = config.get('gas_type', '')
-            
+
             if config_gas_type.lower() == gas.lower():
-                debug_print(f"✅ 通过配置气体类型找到气源: {node_id} (配置气体类型: {config_gas_type})")
+                debug_print(f"通过配置气体类型找到气源: {node_id} (配置气体类型: {config_gas_type})")
                 return node_id
-    
-    # 第三步：查找所有可用的气源设备
-    debug_print(f"📋 方法3: 查找可用气源...")
+
+    # 查找所有可用的气源设备
     available_gas_sources = []
     for node_id in G.nodes():
         node_data = G.nodes[node_id]
         node_class = node_data.get('class', '') or ''
-        
-        if ('gas_source' in node_class or 
+
+        if ('gas_source' in node_class or
             'gas' in node_id.lower() or
             (node_id.startswith('flask_') and any(g in node_id.lower() for g in ['air', 'nitrogen', 'argon']))):
-            
+
             data = node_data.get('data', {})
             gas_type = data.get('gas_type', '未知')
             available_gas_sources.append(f"{node_id} (气体类型: {gas_type})")
-    
-    debug_print(f"📊 可用气源: {available_gas_sources}")
-    
-    # 第四步：如果找不到特定气体，使用默认的第一个气源
-    debug_print(f"📋 方法4: 查找默认气源...")
+
+    # 如果找不到特定气体，使用默认的第一个气源
     default_gas_sources = [
-        node for node in G.nodes() 
+        node for node in G.nodes()
         if ((G.nodes[node].get('class') or '').find('virtual_gas_source') != -1
             or 'gas_source' in node)
     ]
-    
+
     if default_gas_sources:
         default_source = default_gas_sources[0]
-        debug_print(f"⚠️ 未找到特定气体 '{gas}'，使用默认气源: {default_source}")
+        debug_print(f"未找到特定气体 '{gas}'，使用默认气源: {default_source}")
         return default_source
-    
-    debug_print(f"❌ 所有方法都失败了！")
+
     raise ValueError(f"无法找到气体 '{gas}' 的气源。可用气源: {available_gas_sources}")
 
 def find_vacuum_pump(G: nx.DiGraph) -> str:
     """查找真空泵设备"""
-    debug_print("🔍 正在查找真空泵...")
-    
     vacuum_pumps = []
     for node in G.nodes():
         node_data = G.nodes[node]
         node_class = node_data.get('class', '') or ''
-        
-        if ('virtual_vacuum_pump' in node_class or 
-            'vacuum_pump' in node.lower() or 
+
+        if ('virtual_vacuum_pump' in node_class or
+            'vacuum_pump' in node.lower() or
             'vacuum' in node_class.lower()):
             vacuum_pumps.append(node)
-            debug_print(f"📋 发现真空泵: {node}")
-    
-    if not vacuum_pumps:
-        debug_print(f"❌ 系统中未找到真空泵")
-        raise ValueError("系统中未找到真空泵")
-    
-    debug_print(f"✅ 使用真空泵: {vacuum_pumps[0]}")
-    return vacuum_pumps[0]
 
-def find_connected_stirrer(G: nx.DiGraph, vessel: str) -> Optional[str]:
-    """查找与指定容器相连的搅拌器"""
-    debug_print(f"🔍 正在查找与容器 {vessel} 连接的搅拌器...")
-    
-    stirrer_nodes = []
-    for node in G.nodes():
-        node_data = G.nodes[node]
-        node_class = node_data.get('class', '') or ''
-        
-        if 'virtual_stirrer' in node_class or 'stirrer' in node.lower():
-            stirrer_nodes.append(node)
-            debug_print(f"📋 发现搅拌器: {node}")
-    
-    debug_print(f"📊 找到的搅拌器总数: {len(stirrer_nodes)}")
-    
-    # 检查哪个搅拌器与目标容器相连
-    for stirrer in stirrer_nodes:
-        if G.has_edge(stirrer, vessel) or G.has_edge(vessel, stirrer):
-            debug_print(f"✅ 找到连接的搅拌器: {stirrer}")
-            return stirrer
-    
-    # 如果没有连接的搅拌器，返回第一个可用的
-    if stirrer_nodes:
-        debug_print(f"⚠️ 未找到直接连接的搅拌器，使用第一个可用的: {stirrer_nodes[0]}")
-        return stirrer_nodes[0]
-    
-    debug_print("❌ 未找到搅拌器")
-    return None
+    if not vacuum_pumps:
+        raise ValueError("系统中未找到真空泵")
+
+    debug_print(f"使用真空泵: {vacuum_pumps[0]}")
+    return vacuum_pumps[0]
 
 def find_vacuum_solenoid_valve(G: nx.DiGraph, vacuum_pump: str) -> Optional[str]:
     """查找真空泵相关的电磁阀"""
-    debug_print(f"🔍 正在查找真空泵 {vacuum_pump} 的电磁阀...")
-    
-    # 查找所有电磁阀
     solenoid_valves = []
     for node in G.nodes():
         node_data = G.nodes[node]
         node_class = node_data.get('class', '') or ''
-        
+
         if ('solenoid' in node_class.lower() or 'solenoid_valve' in node.lower()):
             solenoid_valves.append(node)
-            debug_print(f"📋 发现电磁阀: {node}")
-    
-    debug_print(f"📊 找到的电磁阀: {solenoid_valves}")
-    
+
     # 检查连接关系
-    debug_print(f"📋 方法1: 检查连接关系...")
     for solenoid in solenoid_valves:
         if G.has_edge(solenoid, vacuum_pump) or G.has_edge(vacuum_pump, solenoid):
-            debug_print(f"✅ 找到连接的真空电磁阀: {solenoid}")
+            debug_print(f"找到连接的真空电磁阀: {solenoid}")
             return solenoid
-    
+
     # 通过命名规则查找
-    debug_print(f"📋 方法2: 检查命名规则...")
     for solenoid in solenoid_valves:
         if 'vacuum' in solenoid.lower() or solenoid == 'solenoid_valve_1':
-            debug_print(f"✅ 通过命名找到真空电磁阀: {solenoid}")
+            debug_print(f"通过命名找到真空电磁阀: {solenoid}")
             return solenoid
-    
-    debug_print("⚠️ 未找到真空电磁阀")
+
+    debug_print("未找到真空电磁阀")
     return None
 
 def find_gas_solenoid_valve(G: nx.DiGraph, gas_source: str) -> Optional[str]:
     """查找气源相关的电磁阀"""
-    debug_print(f"🔍 正在查找气源 {gas_source} 的电磁阀...")
-    
-    # 查找所有电磁阀
     solenoid_valves = []
     for node in G.nodes():
         node_data = G.nodes[node]
         node_class = node_data.get('class', '') or ''
-        
+
         if ('solenoid' in node_class.lower() or 'solenoid_valve' in node.lower()):
             solenoid_valves.append(node)
-    
-    debug_print(f"📊 找到的电磁阀: {solenoid_valves}")
-    
+
     # 检查连接关系
-    debug_print(f"📋 方法1: 检查连接关系...")
     for solenoid in solenoid_valves:
         if G.has_edge(gas_source, solenoid) or G.has_edge(solenoid, gas_source):
-            debug_print(f"✅ 找到连接的气源电磁阀: {solenoid}")
+            debug_print(f"找到连接的气源电磁阀: {solenoid}")
             return solenoid
-    
+
     # 通过命名规则查找
-    debug_print(f"📋 方法2: 检查命名规则...")
     for solenoid in solenoid_valves:
         if 'gas' in solenoid.lower() or solenoid == 'solenoid_valve_2':
-            debug_print(f"✅ 通过命名找到气源电磁阀: {solenoid}")
+            debug_print(f"通过命名找到气源电磁阀: {solenoid}")
             return solenoid
-    
-    debug_print("⚠️ 未找到气源电磁阀")
+
+    debug_print("未找到气源电磁阀")
     return None
 
 def generate_evacuateandrefill_protocol(
     G: nx.DiGraph,
-    vessel: dict,  # 🔧 修改：从字符串改为字典类型
+    vessel: dict,
     gas: str,
     **kwargs
 ) -> List[Dict[str, Any]]:
     """
-    生成抽真空和充气操作的动作序列 - 中文版
-    
+    生成抽真空和充气操作的动作序列
+
     Args:
         G: 设备图
         vessel: 目标容器字典（必需）
-        gas: 气体名称（必需）  
+        gas: 气体名称（必需）
         **kwargs: 其他参数（兼容性）
-    
+
     Returns:
         List[Dict[str, Any]]: 动作序列
     """
-    
-    # 🔧 核心修改：从字典中提取容器ID
+
     vessel_id, vessel_data = get_vessel(vessel)
-    
+
     # 硬编码重复次数为 3
     repeats = 3
-    
-    # 生成协议ID
+
     protocol_id = str(uuid.uuid4())
-    debug_print(f"🆔 生成协议ID: {protocol_id}")
-    
-    debug_print("=" * 60)
-    debug_print("🧪 开始生成抽真空充气协议")
-    debug_print(f"📋 原始参数:")
-    debug_print(f"  🥼 vessel: {vessel} (ID: {vessel_id})")
-    debug_print(f"  💨 气体: '{gas}'")
-    debug_print(f"  🔄 循环次数: {repeats} (硬编码)")
-    debug_print(f"  📦 其他参数: {kwargs}")
-    debug_print("=" * 60)
-    
+
+    debug_print(f"开始生成抽真空充气协议: vessel={vessel_id}, gas={gas}, repeats={repeats}")
+
     action_sequence = []
-    
+
     # === 参数验证和修正 ===
-    debug_print("🔍 步骤1: 参数验证和修正...")
     action_sequence.append(create_action_log(f"开始抽真空充气操作 - 容器: {vessel_id}", "🎬"))
     action_sequence.append(create_action_log(f"目标气体: {gas}", "💨"))
     action_sequence.append(create_action_log(f"循环次数: {repeats}", "🔄"))
-    
-    # 验证必需参数
+
     if not vessel_id:
-        debug_print("❌ 容器参数不能为空")
         raise ValueError("容器参数不能为空")
-    
+
     if not gas:
-        debug_print("❌ 气体参数不能为空")
         raise ValueError("气体参数不能为空")
-    
-    if vessel_id not in G.nodes():  # 🔧 使用 vessel_id
-        debug_print(f"❌ 容器 '{vessel_id}' 在系统中不存在")
+
+    if vessel_id not in G.nodes():
         raise ValueError(f"容器 '{vessel_id}' 在系统中不存在")
-    
-    debug_print("✅ 基本参数验证通过")
+
     action_sequence.append(create_action_log("参数验证通过", "✅"))
-    
+
     # 标准化气体名称
-    debug_print("🔧 标准化气体名称...")
     gas_aliases = {
         'n2': 'nitrogen',
         'ar': 'argon',
@@ -319,61 +218,54 @@ def generate_evacuateandrefill_protocol(
         '二氧化碳': 'carbon_dioxide',
         '氢气': 'hydrogen'
     }
-    
+
     original_gas = gas
     gas_lower = gas.lower().strip()
     if gas_lower in gas_aliases:
         gas = gas_aliases[gas_lower]
-        debug_print(f"🔄 标准化气体名称: {original_gas} -> {gas}")
+        debug_print(f"标准化气体名称: {original_gas} -> {gas}")
         action_sequence.append(create_action_log(f"气体名称标准化: {original_gas} -> {gas}", "🔄"))
-    
-    debug_print(f"📋 最终参数: 容器={vessel_id}, 气体={gas}, 重复={repeats}")
-    
+
+    debug_print(f"最终参数: 容器={vessel_id}, 气体={gas}, 重复={repeats}")
+
     # === 查找设备 ===
-    debug_print("🔍 步骤2: 查找设备...")
     action_sequence.append(create_action_log("正在查找相关设备...", "🔍"))
-    
+
     try:
         vacuum_pump = find_vacuum_pump(G)
         action_sequence.append(create_action_log(f"找到真空泵: {vacuum_pump}", "🌪️"))
-        
+
         gas_source = find_gas_source(G, gas)
         action_sequence.append(create_action_log(f"找到气源: {gas_source}", "💨"))
-        
+
         vacuum_solenoid = find_vacuum_solenoid_valve(G, vacuum_pump)
         if vacuum_solenoid:
             action_sequence.append(create_action_log(f"找到真空电磁阀: {vacuum_solenoid}", "🚪"))
         else:
             action_sequence.append(create_action_log("未找到真空电磁阀", "⚠️"))
-        
+
         gas_solenoid = find_gas_solenoid_valve(G, gas_source)
         if gas_solenoid:
             action_sequence.append(create_action_log(f"找到气源电磁阀: {gas_solenoid}", "🚪"))
         else:
             action_sequence.append(create_action_log("未找到气源电磁阀", "⚠️"))
-        
-        stirrer_id = find_connected_stirrer(G, vessel_id)  # 🔧 使用 vessel_id
+
+        stirrer_id = find_connected_stirrer(G, vessel_id)
         if stirrer_id:
             action_sequence.append(create_action_log(f"找到搅拌器: {stirrer_id}", "🌪️"))
         else:
             action_sequence.append(create_action_log("未找到搅拌器", "⚠️"))
-        
-        debug_print(f"📊 设备配置:")
-        debug_print(f"  🌪️ 真空泵: {vacuum_pump}")
-        debug_print(f"  💨 气源: {gas_source}")
-        debug_print(f"  🚪 真空电磁阀: {vacuum_solenoid}")
-        debug_print(f"  🚪 气源电磁阀: {gas_solenoid}")
-        debug_print(f"  🌪️ 搅拌器: {stirrer_id}")
-        
+
+        debug_print(f"设备配置: 真空泵={vacuum_pump}, 气源={gas_source}, 搅拌器={stirrer_id}")
+
     except Exception as e:
-        debug_print(f"❌ 设备查找失败: {str(e)}")
+        debug_print(f"设备查找失败: {str(e)}")
         action_sequence.append(create_action_log(f"设备查找失败: {str(e)}", "❌"))
         raise ValueError(f"设备查找失败: {str(e)}")
-    
+
     # === 参数设置 ===
-    debug_print("🔍 步骤3: 参数设置...")
     action_sequence.append(create_action_log("设置操作参数...", "⚙️"))
-    
+
     # 根据气体类型调整参数
     if gas.lower() in ['nitrogen', 'argon']:
         VACUUM_VOLUME = 25.0
@@ -381,7 +273,6 @@ def generate_evacuateandrefill_protocol(
         PUMP_FLOW_RATE = 2.0
         VACUUM_TIME = 30.0
         REFILL_TIME = 20.0
-        debug_print("💨 惰性气体: 使用标准参数")
         action_sequence.append(create_action_log("检测到惰性气体，使用标准参数", "💨"))
     elif gas.lower() in ['air', 'oxygen']:
         VACUUM_VOLUME = 20.0
@@ -389,7 +280,6 @@ def generate_evacuateandrefill_protocol(
         PUMP_FLOW_RATE = 1.5
         VACUUM_TIME = 45.0
         REFILL_TIME = 25.0
-        debug_print("🔥 活性气体: 使用保守参数")
         action_sequence.append(create_action_log("检测到活性气体，使用保守参数", "🔥"))
     else:
         VACUUM_VOLUME = 15.0
@@ -397,116 +287,88 @@ def generate_evacuateandrefill_protocol(
         PUMP_FLOW_RATE = 1.0
         VACUUM_TIME = 60.0
         REFILL_TIME = 30.0
-        debug_print("❓ 未知气体: 使用安全参数")
         action_sequence.append(create_action_log("未知气体类型，使用安全参数", "❓"))
-    
+
     STIR_SPEED = 200.0
-    
-    debug_print(f"⚙️ 操作参数:")
-    debug_print(f"  📏 真空体积: {VACUUM_VOLUME}mL")
-    debug_print(f"  📏 充气体积: {REFILL_VOLUME}mL")
-    debug_print(f"  ⚡ 泵流速: {PUMP_FLOW_RATE}mL/s")
-    debug_print(f"  ⏱️ 真空时间: {VACUUM_TIME}s")
-    debug_print(f"  ⏱️ 充气时间: {REFILL_TIME}s")
-    debug_print(f"  🌪️ 搅拌速度: {STIR_SPEED}RPM")
-    
+
     action_sequence.append(create_action_log(f"真空体积: {VACUUM_VOLUME}mL", "📏"))
     action_sequence.append(create_action_log(f"充气体积: {REFILL_VOLUME}mL", "📏"))
     action_sequence.append(create_action_log(f"泵流速: {PUMP_FLOW_RATE}mL/s", "⚡"))
-    
+
     # === 路径验证 ===
-    debug_print("🔍 步骤4: 路径验证...")
     action_sequence.append(create_action_log("验证传输路径...", "🛤️"))
-    
+
     try:
-        # 验证抽真空路径
-        if nx.has_path(G, vessel_id, vacuum_pump):  # 🔧 使用 vessel_id
+        if nx.has_path(G, vessel_id, vacuum_pump):
             vacuum_path = nx.shortest_path(G, source=vessel_id, target=vacuum_pump)
-            debug_print(f"✅ 真空路径: {' -> '.join(vacuum_path)}")
             action_sequence.append(create_action_log(f"真空路径: {' -> '.join(vacuum_path)}", "🛤️"))
         else:
-            debug_print(f"⚠️ 真空路径不存在，继续执行但可能有问题")
             action_sequence.append(create_action_log("真空路径检查: 路径不存在", "⚠️"))
-        
-        # 验证充气路径
-        if nx.has_path(G, gas_source, vessel_id):  # 🔧 使用 vessel_id
+
+        if nx.has_path(G, gas_source, vessel_id):
             gas_path = nx.shortest_path(G, source=gas_source, target=vessel_id)
-            debug_print(f"✅ 气体路径: {' -> '.join(gas_path)}")
             action_sequence.append(create_action_log(f"气体路径: {' -> '.join(gas_path)}", "🛤️"))
         else:
-            debug_print(f"⚠️ 气体路径不存在，继续执行但可能有问题")
             action_sequence.append(create_action_log("气体路径检查: 路径不存在", "⚠️"))
-        
+
     except Exception as e:
-        debug_print(f"⚠️ 路径验证失败: {str(e)}，继续执行")
         action_sequence.append(create_action_log(f"路径验证失败: {str(e)}", "⚠️"))
-    
+
     # === 启动搅拌器 ===
-    debug_print("🔍 步骤5: 启动搅拌器...")
-    
     if stirrer_id:
-        debug_print(f"🌪️ 启动搅拌器: {stirrer_id}")
         action_sequence.append(create_action_log(f"启动搅拌器 {stirrer_id} (速度: {STIR_SPEED}rpm)", "🌪️"))
-        
+
         action_sequence.append({
             "device_id": stirrer_id,
             "action_name": "start_stir",
             "action_kwargs": {
-                "vessel": {"id": vessel_id},  # 🔧 使用 vessel_id
+                "vessel": {"id": vessel_id},
                 "stir_speed": STIR_SPEED,
                 "purpose": "抽真空充气前预搅拌"
             }
         })
-        
-        # 等待搅拌稳定
+
         action_sequence.append(create_action_log("等待搅拌稳定...", "⏳"))
         action_sequence.append({
             "action_name": "wait",
             "action_kwargs": {"time": 5.0}
         })
     else:
-        debug_print("⚠️ 未找到搅拌器，跳过搅拌器启动")
         action_sequence.append(create_action_log("跳过搅拌器启动", "⏭️"))
-    
+
     # === 执行循环 ===
-    debug_print("🔍 步骤6: 执行抽真空-充气循环...")
     action_sequence.append(create_action_log(f"开始 {repeats} 次抽真空-充气循环", "🔄"))
-    
+
     for cycle in range(repeats):
-        debug_print(f"=== 第 {cycle+1}/{repeats} 轮循环 ===")
         action_sequence.append(create_action_log(f"第 {cycle+1}/{repeats} 轮循环开始", "🚀"))
-        
+
         # ============ 抽真空阶段 ============
-        debug_print(f"🌪️ 抽真空阶段开始")
         action_sequence.append(create_action_log("开始抽真空阶段", "🌪️"))
-        
+
         # 启动真空泵
-        debug_print(f"🔛 启动真空泵: {vacuum_pump}")
         action_sequence.append(create_action_log(f"启动真空泵: {vacuum_pump}", "🔛"))
         action_sequence.append({
             "device_id": vacuum_pump,
             "action_name": "set_status",
             "action_kwargs": {"string": "ON"}
         })
-        
+
         # 开启真空电磁阀
         if vacuum_solenoid:
-            debug_print(f"🚪 打开真空电磁阀: {vacuum_solenoid}")
             action_sequence.append(create_action_log(f"打开真空电磁阀: {vacuum_solenoid}", "🚪"))
             action_sequence.append({
                 "device_id": vacuum_solenoid,
                 "action_name": "set_valve_position",
                 "action_kwargs": {"command": "OPEN"}
             })
-        
+
         # 抽真空操作
-        debug_print(f"🌪️ 抽真空操作: {vessel_id} -> {vacuum_pump}")
         action_sequence.append(create_action_log(f"开始抽真空: {vessel_id} -> {vacuum_pump}", "🌪️"))
-        
+
         try:
             vacuum_transfer_actions = generate_pump_protocol_with_rinsing(
                 G=G,
-                from_vessel=vessel_id,  # 🔧 使用 vessel_id
+                from_vessel=vessel_id,
                 to_vessel=vacuum_pump,
                 volume=VACUUM_VOLUME,
                 amount="",
@@ -519,27 +381,25 @@ def generate_evacuateandrefill_protocol(
                 flowrate=PUMP_FLOW_RATE,
                 transfer_flowrate=PUMP_FLOW_RATE
             )
-            
+
             if vacuum_transfer_actions:
                 action_sequence.extend(vacuum_transfer_actions)
-                debug_print(f"✅ 添加了 {len(vacuum_transfer_actions)} 个抽真空动作")
                 action_sequence.append(create_action_log(f"抽真空协议完成 ({len(vacuum_transfer_actions)} 个操作)", "✅"))
             else:
-                debug_print("⚠️ 抽真空协议返回空序列，添加手动动作")
                 action_sequence.append(create_action_log("抽真空协议为空，使用手动等待", "⚠️"))
                 action_sequence.append({
                     "action_name": "wait",
                     "action_kwargs": {"time": VACUUM_TIME}
                 })
-                
+
         except Exception as e:
-            debug_print(f"❌ 抽真空失败: {str(e)}")
+            debug_print(f"抽真空失败: {str(e)}")
             action_sequence.append(create_action_log(f"抽真空失败: {str(e)}", "❌"))
             action_sequence.append({
                 "action_name": "wait",
                 "action_kwargs": {"time": VACUUM_TIME}
             })
-        
+
         # 抽真空后等待
         wait_minutes = VACUUM_TIME / 60
         action_sequence.append(create_action_log(f"抽真空后等待 ({wait_minutes:.1f} 分钟)", "⏳"))
@@ -547,65 +407,59 @@ def generate_evacuateandrefill_protocol(
             "action_name": "wait",
             "action_kwargs": {"time": VACUUM_TIME}
         })
-        
+
         # 关闭真空电磁阀
         if vacuum_solenoid:
-            debug_print(f"🚪 关闭真空电磁阀: {vacuum_solenoid}")
             action_sequence.append(create_action_log(f"关闭真空电磁阀: {vacuum_solenoid}", "🚪"))
             action_sequence.append({
                 "device_id": vacuum_solenoid,
                 "action_name": "set_valve_position",
                 "action_kwargs": {"command": "CLOSED"}
             })
-        
+
         # 关闭真空泵
-        debug_print(f"🔴 停止真空泵: {vacuum_pump}")
         action_sequence.append(create_action_log(f"停止真空泵: {vacuum_pump}", "🔴"))
         action_sequence.append({
             "device_id": vacuum_pump,
             "action_name": "set_status",
             "action_kwargs": {"string": "OFF"}
         })
-        
+
         # 阶段间等待
         action_sequence.append(create_action_log("抽真空阶段完成，短暂等待", "⏳"))
         action_sequence.append({
             "action_name": "wait",
             "action_kwargs": {"time": 5.0}
         })
-        
+
         # ============ 充气阶段 ============
-        debug_print(f"💨 充气阶段开始")
         action_sequence.append(create_action_log("开始气体充气阶段", "💨"))
-        
+
         # 启动气源
-        debug_print(f"🔛 启动气源: {gas_source}")
         action_sequence.append(create_action_log(f"启动气源: {gas_source}", "🔛"))
         action_sequence.append({
             "device_id": gas_source,
             "action_name": "set_status",
             "action_kwargs": {"string": "ON"}
         })
-        
+
         # 开启气源电磁阀
         if gas_solenoid:
-            debug_print(f"🚪 打开气源电磁阀: {gas_solenoid}")
             action_sequence.append(create_action_log(f"打开气源电磁阀: {gas_solenoid}", "🚪"))
             action_sequence.append({
                 "device_id": gas_solenoid,
                 "action_name": "set_valve_position",
                 "action_kwargs": {"command": "OPEN"}
             })
-        
+
         # 充气操作
-        debug_print(f"💨 充气操作: {gas_source} -> {vessel_id}")
         action_sequence.append(create_action_log(f"开始气体充气: {gas_source} -> {vessel_id}", "💨"))
-        
+
         try:
             gas_transfer_actions = generate_pump_protocol_with_rinsing(
                 G=G,
                 from_vessel=gas_source,
-                to_vessel=vessel_id,  # 🔧 使用 vessel_id
+                to_vessel=vessel_id,
                 volume=REFILL_VOLUME,
                 amount="",
                 time=0.0,
@@ -617,27 +471,25 @@ def generate_evacuateandrefill_protocol(
                 flowrate=PUMP_FLOW_RATE,
                 transfer_flowrate=PUMP_FLOW_RATE
             )
-            
+
             if gas_transfer_actions:
                 action_sequence.extend(gas_transfer_actions)
-                debug_print(f"✅ 添加了 {len(gas_transfer_actions)} 个充气动作")
                 action_sequence.append(create_action_log(f"气体充气协议完成 ({len(gas_transfer_actions)} 个操作)", "✅"))
             else:
-                debug_print("⚠️ 充气协议返回空序列，添加手动动作")
                 action_sequence.append(create_action_log("充气协议为空，使用手动等待", "⚠️"))
                 action_sequence.append({
                     "action_name": "wait",
                     "action_kwargs": {"time": REFILL_TIME}
                 })
-                
+
         except Exception as e:
-            debug_print(f"❌ 气体充气失败: {str(e)}")
+            debug_print(f"气体充气失败: {str(e)}")
             action_sequence.append(create_action_log(f"气体充气失败: {str(e)}", "❌"))
             action_sequence.append({
                 "action_name": "wait",
                 "action_kwargs": {"time": REFILL_TIME}
             })
-        
+
         # 充气后等待
         refill_wait_minutes = REFILL_TIME / 60
         action_sequence.append(create_action_log(f"充气后等待 ({refill_wait_minutes:.1f} 分钟)", "⏳"))
@@ -645,29 +497,26 @@ def generate_evacuateandrefill_protocol(
             "action_name": "wait",
             "action_kwargs": {"time": REFILL_TIME}
         })
-        
+
         # 关闭气源电磁阀
         if gas_solenoid:
-            debug_print(f"🚪 关闭气源电磁阀: {gas_solenoid}")
             action_sequence.append(create_action_log(f"关闭气源电磁阀: {gas_solenoid}", "🚪"))
             action_sequence.append({
                 "device_id": gas_solenoid,
                 "action_name": "set_valve_position",
                 "action_kwargs": {"command": "CLOSED"}
             })
-        
+
         # 关闭气源
-        debug_print(f"🔴 停止气源: {gas_source}")
         action_sequence.append(create_action_log(f"停止气源: {gas_source}", "🔴"))
         action_sequence.append({
             "device_id": gas_source,
             "action_name": "set_status",
             "action_kwargs": {"string": "OFF"}
         })
-        
+
         # 循环间等待
         if cycle < repeats - 1:
-            debug_print(f"⏳ 等待下一个循环...")
             action_sequence.append(create_action_log("等待下一个循环...", "⏳"))
             action_sequence.append({
                 "action_name": "wait",
@@ -675,78 +524,58 @@ def generate_evacuateandrefill_protocol(
             })
         else:
             action_sequence.append(create_action_log(f"第 {cycle+1}/{repeats} 轮循环完成", "✅"))
-    
+
     # === 停止搅拌器 ===
-    debug_print("🔍 步骤7: 停止搅拌器...")
-    
     if stirrer_id:
-        debug_print(f"🛑 停止搅拌器: {stirrer_id}")
         action_sequence.append(create_action_log(f"停止搅拌器: {stirrer_id}", "🛑"))
         action_sequence.append({
             "device_id": stirrer_id,
             "action_name": "stop_stir",
-            "action_kwargs": {"vessel": {"id": vessel_id},}  # 🔧 使用 vessel_id
+            "action_kwargs": {"vessel": {"id": vessel_id},}
         })
     else:
         action_sequence.append(create_action_log("跳过搅拌器停止", "⏭️"))
-    
+
     # === 最终等待 ===
     action_sequence.append(create_action_log("最终稳定等待...", "⏳"))
     action_sequence.append({
         "action_name": "wait",
         "action_kwargs": {"time": 10.0}
     })
-    
+
     # === 总结 ===
     total_time = (VACUUM_TIME + REFILL_TIME + 25) * repeats + 20
-    
-    debug_print("=" * 60)
-    debug_print(f"🎉 抽真空充气协议生成完成")
-    debug_print(f"📊 协议统计:")
-    debug_print(f"  📋 总动作数: {len(action_sequence)}")
-    debug_print(f"  ⏱️ 预计总时间: {total_time:.0f}s ({total_time/60:.1f} 分钟)")
-    debug_print(f"  🥼 处理容器: {vessel_id}")
-    debug_print(f"  💨 使用气体: {gas}")
-    debug_print(f"  🔄 重复次数: {repeats}")
-    debug_print("=" * 60)
-    
-    # 添加完成日志
+
+    debug_print(f"抽真空充气协议生成完成: {len(action_sequence)} 个动作, 预计 {total_time:.0f}s")
+
     summary_msg = f"抽真空充气协议完成: {vessel_id} (使用 {gas}，{repeats} 次循环)"
     action_sequence.append(create_action_log(summary_msg, "🎉"))
-    
+
     return action_sequence
 
 # === 便捷函数 ===
 
-def generate_nitrogen_purge_protocol(G: nx.DiGraph, vessel: dict, **kwargs) -> List[Dict[str, Any]]:  # 🔧 修改参数类型
+def generate_nitrogen_purge_protocol(G: nx.DiGraph, vessel: dict, **kwargs) -> List[Dict[str, Any]]:
     """生成氮气置换协议"""
-    vessel_id = vessel["id"]
-    debug_print(f"💨 生成氮气置换协议: {vessel_id}")
     return generate_evacuateandrefill_protocol(G, vessel, "nitrogen", **kwargs)
 
-def generate_argon_purge_protocol(G: nx.DiGraph, vessel: dict, **kwargs) -> List[Dict[str, Any]]:  # 🔧 修改参数类型
+def generate_argon_purge_protocol(G: nx.DiGraph, vessel: dict, **kwargs) -> List[Dict[str, Any]]:
     """生成氩气置换协议"""
-    vessel_id = vessel["id"]
-    debug_print(f"💨 生成氩气置换协议: {vessel_id}")
     return generate_evacuateandrefill_protocol(G, vessel, "argon", **kwargs)
 
-def generate_air_purge_protocol(G: nx.DiGraph, vessel: dict, **kwargs) -> List[Dict[str, Any]]:  # 🔧 修改参数类型
+def generate_air_purge_protocol(G: nx.DiGraph, vessel: dict, **kwargs) -> List[Dict[str, Any]]:
     """生成空气置换协议"""
-    vessel_id = vessel["id"]
-    debug_print(f"💨 生成空气置换协议: {vessel_id}")
     return generate_evacuateandrefill_protocol(G, vessel, "air", **kwargs)
 
-def generate_inert_atmosphere_protocol(G: nx.DiGraph, vessel: dict, gas: str = "nitrogen", **kwargs) -> List[Dict[str, Any]]:  # 🔧 修改参数类型
+def generate_inert_atmosphere_protocol(G: nx.DiGraph, vessel: dict, gas: str = "nitrogen", **kwargs) -> List[Dict[str, Any]]:
     """生成惰性气氛协议"""
-    vessel_id = vessel["id"]
-    debug_print(f"🛡️ 生成惰性气氛协议: {vessel_id} (使用 {gas})")
     return generate_evacuateandrefill_protocol(G, vessel, gas, **kwargs)
 
 # 测试函数
 def test_evacuateandrefill_protocol():
     """测试抽真空充气协议"""
-    debug_print("=== 抽真空充气协议增强中文版测试 ===")
-    debug_print("✅ 测试完成")
+    debug_print("=== 抽真空充气协议测试 ===")
+    debug_print("测试完成")
 
 if __name__ == "__main__":
-    test_evacuateandrefill_protocol()
+    test_evacuateandrefill_protocol()

unilabos/compile/evacuateandrefill_protocol_old.py

@@ -1,143 +0,0 @@
-# import numpy as np
-# import networkx as nx
-
-
-# def generate_evacuateandrefill_protocol(
-#     G: nx.DiGraph, 
-#     vessel: str, 
-#     gas: str, 
-#     repeats: int = 1
-# ) -> list[dict]:
-#     """
-#     生成泵操作的动作序列。
-    
-#     :param G: 有向图, 节点为容器和注射泵, 边为流体管道, A→B边的属性为管道接A端的阀门位置
-#     :param from_vessel: 容器A
-#     :param to_vessel: 容器B
-#     :param volume: 转移的体积
-#     :param flowrate: 最终注入容器B时的流速
-#     :param transfer_flowrate: 泵骨架中转移流速（若不指定，默认与注入流速相同）
-#     :return: 泵操作的动作序列
-#     """
-    
-#     # 生成电磁阀、真空泵、气源操作的动作序列
-#     vacuum_action_sequence = []
-#     nodes = G.nodes(data=True)
-    
-#     # 找到和 vessel 相连的电磁阀和真空泵、气源
-#     vacuum_backbone = {"vessel": vessel}
-    
-#     for neighbor in G.neighbors(vessel):
-#         if nodes[neighbor]["class"].startswith("solenoid_valve"):
-#             for neighbor2 in G.neighbors(neighbor):
-#                 if neighbor2 == vessel:
-#                     continue
-#                 if nodes[neighbor2]["class"].startswith("vacuum_pump"):
-#                     vacuum_backbone.update({"vacuum_valve": neighbor, "pump": neighbor2})
-#                     break
-#                 elif nodes[neighbor2]["class"].startswith("gas_source"):
-#                     vacuum_backbone.update({"gas_valve": neighbor, "gas": neighbor2})
-#                     break
-#     # 判断是否设备齐全
-#     if len(vacuum_backbone) < 5:
-#         print(f"\n\n\n{vacuum_backbone}\n\n\n")
-#         raise ValueError("Not all devices are connected to the vessel.")
-    
-#     # 生成操作的动作序列
-#     for i in range(repeats):
-#         # 打开真空泵阀门、关闭气源阀门
-#         vacuum_action_sequence.append([
-#             {
-#                 "device_id": vacuum_backbone["vacuum_valve"],
-#                 "action_name": "set_valve_position",
-#                 "action_kwargs": {
-#                     "command": "OPEN"
-#                 }
-#             },
-#             {
-#                 "device_id": vacuum_backbone["gas_valve"],
-#                 "action_name": "set_valve_position",
-#                 "action_kwargs": {
-#                     "command": "CLOSED"
-#                 }
-#             }
-#         ])
-        
-#         # 打开真空泵、关闭气源
-#         vacuum_action_sequence.append([
-#             {
-#                 "device_id": vacuum_backbone["pump"],
-#                 "action_name": "set_status",
-#                 "action_kwargs": {
-#                     "string": "ON"
-#                 }
-#             },
-#             {
-#                 "device_id": vacuum_backbone["gas"],
-#                 "action_name": "set_status",
-#                 "action_kwargs": {
-#                     "string": "OFF"
-#                 }
-#             }
-#         ])
-#         vacuum_action_sequence.append({"action_name": "wait", "action_kwargs": {"time": 60}})
-        
-#         # 关闭真空泵阀门、打开气源阀门
-#         vacuum_action_sequence.append([
-#             {
-#                 "device_id": vacuum_backbone["vacuum_valve"],
-#                 "action_name": "set_valve_position",
-#                 "action_kwargs": {
-#                     "command": "CLOSED"
-#                 }
-#             },
-#             {
-#                 "device_id": vacuum_backbone["gas_valve"],
-#                 "action_name": "set_valve_position",
-#                 "action_kwargs": {
-#                     "command": "OPEN"
-#                 }
-#             }
-#         ])
-        
-#         # 关闭真空泵、打开气源
-#         vacuum_action_sequence.append([
-#             {
-#                 "device_id": vacuum_backbone["pump"],
-#                 "action_name": "set_status",
-#                 "action_kwargs": {
-#                     "string": "OFF"
-#                 }
-#             },
-#             {
-#                 "device_id": vacuum_backbone["gas"],
-#                 "action_name": "set_status",
-#                 "action_kwargs": {
-#                     "string": "ON"
-#                 }
-#             }
-#         ])
-#         vacuum_action_sequence.append({"action_name": "wait", "action_kwargs": {"time": 60}})
-        
-#         # 关闭气源
-#         vacuum_action_sequence.append(
-#             {
-#                 "device_id": vacuum_backbone["gas"],
-#                 "action_name": "set_status",
-#                 "action_kwargs": {
-#                     "string": "OFF"
-#                 }
-#             }
-#         )
-        
-#         # 关闭阀门
-#         vacuum_action_sequence.append(
-#             {
-#                 "device_id": vacuum_backbone["gas_valve"],
-#                 "action_name": "set_valve_position",
-#                 "action_kwargs": {
-#                     "command": "CLOSED"
-#                 }
-#             }
-#         )
-#     return vacuum_action_sequence

unilabos/compile/evaporate_protocol.py

@@ -4,128 +4,99 @@ import logging
 import re
 from .utils.vessel_parser import get_vessel
 from .utils.unit_parser import parse_time_input
+from .utils.logger_util import debug_print
 
 logger = logging.getLogger(__name__)
 
-def debug_print(message):
-    """调试输出"""
-    logger.info(f"[EVAPORATE] {message}")
-
 
 def find_rotavap_device(G: nx.DiGraph, vessel: str = None) -> Optional[str]:
     """
     在组态图中查找旋转蒸发仪设备
-    
+
     Args:
         G: 设备图
         vessel: 指定的设备名称（可选）
-    
+
     Returns:
         str: 找到的旋转蒸发仪设备ID，如果没找到返回None
     """
-    debug_print("🔍 开始查找旋转蒸发仪设备... 🌪️")
-    
     # 如果指定了vessel，先检查是否存在且是旋转蒸发仪
     if vessel:
-        debug_print(f"🎯 检查指定设备: {vessel} 🔧")
         if vessel in G.nodes():
             node_data = G.nodes[vessel]
             node_class = node_data.get('class', '')
             node_type = node_data.get('type', '')
-            
-            debug_print(f"📋 设备信息 {vessel}: class={node_class}, type={node_type}")
-            
-            # 检查是否为旋转蒸发仪
+
             if any(keyword in str(node_class).lower() for keyword in ['rotavap', 'rotary', 'evaporat']):
-                debug_print(f"🎉 找到指定的旋转蒸发仪: {vessel} ✨")
+                debug_print(f"找到指定的旋转蒸发仪: {vessel}")
                 return vessel
             elif node_type == 'device':
-                debug_print(f"✅ 指定设备存在，尝试直接使用: {vessel} 🔧")
+                debug_print(f"指定设备存在，尝试直接使用: {vessel}")
                 return vessel
-        else:
-            debug_print(f"❌ 指定的设备 {vessel} 不存在 😞")
-    
+
     # 在所有设备中查找旋转蒸发仪
-    debug_print("🔎 在所有设备中搜索旋转蒸发仪... 🕵️‍♀️")
     rotavap_candidates = []
-    
+
     for node_id, node_data in G.nodes(data=True):
         node_class = node_data.get('class', '')
         node_type = node_data.get('type', '')
-        
-        # 跳过非设备节点
+
         if node_type != 'device':
             continue
-            
-        # 检查设备类型
+
         if any(keyword in str(node_class).lower() for keyword in ['rotavap', 'rotary', 'evaporat']):
             rotavap_candidates.append(node_id)
-            debug_print(f"🌟 找到旋转蒸发仪候选: {node_id} (class: {node_class}) 🌪️")
         elif any(keyword in str(node_id).lower() for keyword in ['rotavap', 'rotary', 'evaporat']):
             rotavap_candidates.append(node_id)
-            debug_print(f"🌟 找到旋转蒸发仪候选 (按名称): {node_id} 🌪️")
-    
+
     if rotavap_candidates:
-        selected = rotavap_candidates[0]  # 选择第一个找到的
-        debug_print(f"🎯 选择旋转蒸发仪: {selected} 🏆")
+        selected = rotavap_candidates[0]
+        debug_print(f"选择旋转蒸发仪: {selected}")
         return selected
-    
-    debug_print("😭 未找到旋转蒸发仪设备 💔")
+
+    debug_print("未找到旋转蒸发仪设备")
     return None
 
 def find_connected_vessel(G: nx.DiGraph, rotavap_device: str) -> Optional[str]:
     """
     查找与旋转蒸发仪连接的容器
-    
-    Args:
-        G: 设备图
-        rotavap_device: 旋转蒸发仪设备ID
-    
-    Returns:
-        str: 连接的容器ID，如果没找到返回None
     """
-    debug_print(f"🔗 查找与 {rotavap_device} 连接的容器... 🥽")
-    
-    # 查看旋转蒸发仪的子设备
     rotavap_data = G.nodes[rotavap_device]
     children = rotavap_data.get('children', [])
-    
-    debug_print(f"👶 检查子设备: {children}")
+
     for child_id in children:
         if child_id in G.nodes():
             child_data = G.nodes[child_id]
             child_type = child_data.get('type', '')
-            
+
             if child_type == 'container':
-                debug_print(f"🎉 找到连接的容器: {child_id} 🥽✨")
+                debug_print(f"找到连接的容器: {child_id}")
                 return child_id
-    
-    # 查看邻接的容器
-    debug_print("🤝 检查邻接设备...")
+
     for neighbor in G.neighbors(rotavap_device):
         neighbor_data = G.nodes[neighbor]
         neighbor_type = neighbor_data.get('type', '')
-        
+
         if neighbor_type == 'container':
-            debug_print(f"🎉 找到邻接的容器: {neighbor} 🥽✨")
+            debug_print(f"找到邻接的容器: {neighbor}")
             return neighbor
-    
-    debug_print("😞 未找到连接的容器 💔")
+
+    debug_print("未找到连接的容器")
     return None
 
 def generate_evaporate_protocol(
     G: nx.DiGraph,
-    vessel: dict,  # 🔧 修改：从字符串改为字典类型
+    vessel: dict,
     pressure: float = 0.1,
     temp: float = 60.0,
-    time: Union[str, float] = "180",     # 🔧 修改：支持字符串时间
+    time: Union[str, float] = "180",
     stir_speed: float = 100.0,
     solvent: str = "",
     **kwargs
 ) -> List[Dict[str, Any]]:
     """
     生成蒸发操作的协议序列 - 支持单位和体积运算
-    
+
     Args:
         G: 设备图
         vessel: 容器字典（从XDL传入）
@@ -135,27 +106,16 @@ def generate_evaporate_protocol(
         stir_speed: 旋转速度 (RPM)，默认100
         solvent: 溶剂名称（用于参数优化）
         **kwargs: 其他参数（兼容性）
-    
+
     Returns:
         List[Dict[str, Any]]: 动作序列
     """
-    
-    # 🔧 核心修改：从字典中提取容器ID
+
     vessel_id, vessel_data = get_vessel(vessel)
-    
-    debug_print("🌟" * 20)
-    debug_print("🌪️ 开始生成蒸发协议（支持单位和体积运算）✨")
-    debug_print(f"📝 输入参数:")
-    debug_print(f"  🥽 vessel: {vessel} (ID: {vessel_id})")
-    debug_print(f"  💨 pressure: {pressure} bar")
-    debug_print(f"  🌡️ temp: {temp}°C")
-    debug_print(f"  ⏰ time: {time} (类型: {type(time)})")
-    debug_print(f"  🌪️ stir_speed: {stir_speed} RPM")
-    debug_print(f"  🧪 solvent: '{solvent}'")
-    debug_print("🌟" * 20)
-    
-    # 🔧 新增：记录蒸发前的容器状态
-    debug_print("🔍 记录蒸发前容器状态...")
+
+    debug_print(f"开始生成蒸发协议: vessel={vessel_id}, pressure={pressure}, temp={temp}, time={time}")
+
+    # 记录蒸发前的容器状态
     original_liquid_volume = 0.0
     if "data" in vessel and "liquid_volume" in vessel["data"]:
         current_volume = vessel["data"]["liquid_volume"]
@@ -163,168 +123,97 @@ def generate_evaporate_protocol(
             original_liquid_volume = current_volume[0]
         elif isinstance(current_volume, (int, float)):
             original_liquid_volume = current_volume
-    debug_print(f"📊 蒸发前液体体积: {original_liquid_volume:.2f}mL")
-    
-    # === 步骤1: 查找旋转蒸发仪设备 ===
-    debug_print("📍 步骤1: 查找旋转蒸发仪设备... 🔍")
-    
-    # 验证vessel参数
-    if not vessel_id:
-        debug_print("❌ vessel 参数不能为空! 😱")
-        raise ValueError("vessel 参数不能为空")
-    
+
     # 查找旋转蒸发仪设备
+    if not vessel_id:
+        raise ValueError("vessel 参数不能为空")
+
     rotavap_device = find_rotavap_device(G, vessel_id)
     if not rotavap_device:
-        debug_print("💥 未找到旋转蒸发仪设备! 😭")
         raise ValueError(f"未找到旋转蒸发仪设备。请检查组态图中是否包含 class 包含 'rotavap'、'rotary' 或 'evaporat' 的设备")
-    
-    debug_print(f"🎉 成功找到旋转蒸发仪: {rotavap_device} ✨")
-    
-    # === 步骤2: 确定目标容器 ===
-    debug_print("📍 步骤2: 确定目标容器... 🥽")
-    
+
+    # 确定目标容器
     target_vessel = vessel_id
-    
-    # 如果vessel就是旋转蒸发仪设备，查找连接的容器
+
     if vessel_id == rotavap_device:
-        debug_print("🔄 vessel就是旋转蒸发仪，查找连接的容器...")
         connected_vessel = find_connected_vessel(G, rotavap_device)
         if connected_vessel:
             target_vessel = connected_vessel
-            debug_print(f"✅ 使用连接的容器: {target_vessel} 🥽✨")
         else:
-            debug_print(f"⚠️ 未找到连接的容器，使用设备本身: {rotavap_device} 🔧")
             target_vessel = rotavap_device
     elif vessel_id in G.nodes() and G.nodes[vessel_id].get('type') == 'container':
-        debug_print(f"✅ 使用指定的容器: {vessel_id} 🥽✨")
         target_vessel = vessel_id
     else:
-        debug_print(f"⚠️ 容器 '{vessel_id}' 不存在或类型不正确，使用旋转蒸发仪设备: {rotavap_device} 🔧")
         target_vessel = rotavap_device
-    
-    # === 🔧 新增：步骤3：单位解析处理 ===
-    debug_print("📍 步骤3: 单位解析处理... ⚡")
-    
-    # 解析时间
+
+    # 单位解析处理
     final_time = parse_time_input(time)
-    debug_print(f"🎯 时间解析完成: {time} → {final_time}s ({final_time/60:.1f}分钟) ⏰✨")
-    
-    # === 步骤4: 参数验证和修正 ===
-    debug_print("📍 步骤4: 参数验证和修正... 🔧")
-    
-    # 修正参数范围
+    debug_print(f"时间解析: {time} -> {final_time}s ({final_time/60:.1f}分钟)")
+
+    # 参数验证和修正
     if pressure <= 0 or pressure > 1.0:
-        debug_print(f"⚠️ 真空度 {pressure} bar 超出范围，修正为 0.1 bar 💨")
         pressure = 0.1
-    else:
-        debug_print(f"✅ 真空度 {pressure} bar 在正常范围内 💨")
-    
+
     if temp < 10.0 or temp > 200.0:
-        debug_print(f"⚠️ 温度 {temp}°C 超出范围，修正为 60°C 🌡️")
         temp = 60.0
-    else:
-        debug_print(f"✅ 温度 {temp}°C 在正常范围内 🌡️")
-    
+
     if final_time <= 0:
-        debug_print(f"⚠️ 时间 {final_time}s 无效，修正为 180s (3分钟) ⏰")
         final_time = 180.0
-    else:
-        debug_print(f"✅ 时间 {final_time}s ({final_time/60:.1f}分钟) 有效 ⏰")
-    
+
     if stir_speed < 10.0 or stir_speed > 300.0:
-        debug_print(f"⚠️ 旋转速度 {stir_speed} RPM 超出范围，修正为 100 RPM 🌪️")
         stir_speed = 100.0
-    else:
-        debug_print(f"✅ 旋转速度 {stir_speed} RPM 在正常范围内 🌪️")
-    
+
     # 根据溶剂优化参数
     if solvent:
-        debug_print(f"🧪 根据溶剂 '{solvent}' 优化参数... 🔬")
         solvent_lower = solvent.lower()
-        
+
         if any(s in solvent_lower for s in ['water', 'aqueous', 'h2o']):
             temp = max(temp, 80.0)
             pressure = max(pressure, 0.2)
-            debug_print("💧 水系溶剂：提高温度和真空度 🌡️💨")
         elif any(s in solvent_lower for s in ['ethanol', 'methanol', 'acetone']):
             temp = min(temp, 50.0)
             pressure = min(pressure, 0.05)
-            debug_print("🍺 易挥发溶剂：降低温度和真空度 🌡️💨")
         elif any(s in solvent_lower for s in ['dmso', 'dmi', 'toluene']):
             temp = max(temp, 100.0)
             pressure = min(pressure, 0.01)
-            debug_print("🔥 高沸点溶剂：提高温度，降低真空度 🌡️💨")
-        else:
-            debug_print("🧪 通用溶剂，使用标准参数 ✨")
-    else:
-        debug_print("🤷‍♀️ 未指定溶剂，使用默认参数 ✨")
-    
-    debug_print(f"🎯 最终参数: pressure={pressure} bar 💨, temp={temp}°C 🌡️, time={final_time}s ⏰, stir_speed={stir_speed} RPM 🌪️")
-    
-    # === 🔧 新增：步骤5：蒸发体积计算 ===
-    debug_print("📍 步骤5: 蒸发体积计算... 📊")
-    
-    # 根据温度、真空度、时间和溶剂类型估算蒸发量
+
+    debug_print(f"最终参数: pressure={pressure}bar, temp={temp}°C, time={final_time}s, stir_speed={stir_speed}RPM")
+
+    # 蒸发体积计算
     evaporation_volume = 0.0
     if original_liquid_volume > 0:
-        # 基础蒸发速率（mL/min）
-        base_evap_rate = 0.5  # 基础速率
-        
-        # 温度系数（高温蒸发更快）
+        base_evap_rate = 0.5
         temp_factor = 1.0 + (temp - 25.0) / 100.0
-        
-        # 真空系数（真空度越高蒸发越快）
         vacuum_factor = 1.0 + (1.0 - pressure) * 2.0
-        
-        # 溶剂系数
+
         solvent_factor = 1.0
         if solvent:
             solvent_lower = solvent.lower()
             if any(s in solvent_lower for s in ['water', 'h2o']):
-                solvent_factor = 0.8  # 水蒸发较慢
+                solvent_factor = 0.8
             elif any(s in solvent_lower for s in ['ethanol', 'methanol', 'acetone']):
-                solvent_factor = 1.5  # 易挥发溶剂蒸发快
+                solvent_factor = 1.5
             elif any(s in solvent_lower for s in ['dmso', 'dmi']):
-                solvent_factor = 0.3  # 高沸点溶剂蒸发慢
-        
-        # 计算总蒸发量
+                solvent_factor = 0.3
+
         total_evap_rate = base_evap_rate * temp_factor * vacuum_factor * solvent_factor
         evaporation_volume = min(
-            original_liquid_volume * 0.95,  # 最多蒸发95%
-            total_evap_rate * (final_time / 60.0)  # 时间相关的蒸发量
+            original_liquid_volume * 0.95,
+            total_evap_rate * (final_time / 60.0)
         )
-        
-        debug_print(f"📊 蒸发量计算:")
-        debug_print(f"  - 基础蒸发速率: {base_evap_rate} mL/min")
-        debug_print(f"  - 温度系数: {temp_factor:.2f} (基于 {temp}°C)")
-        debug_print(f"  - 真空系数: {vacuum_factor:.2f} (基于 {pressure} bar)")
-        debug_print(f"  - 溶剂系数: {solvent_factor:.2f} ({solvent or '通用'})")
-        debug_print(f"  - 总蒸发速率: {total_evap_rate:.2f} mL/min")
-        debug_print(f"  - 预计蒸发量: {evaporation_volume:.2f}mL ({evaporation_volume/original_liquid_volume*100:.1f}%)")
-    
-    # === 步骤6: 生成动作序列 ===
-    debug_print("📍 步骤6: 生成动作序列... 🎬")
-    
+
+        debug_print(f"预计蒸发量: {evaporation_volume:.2f}mL ({evaporation_volume/original_liquid_volume*100:.1f}%)")
+
+    # 生成动作序列
     action_sequence = []
-    
+
     # 1. 等待稳定
-    debug_print("  🔄 动作1: 添加初始等待稳定... ⏳")
     action_sequence.append({
         "action_name": "wait",
         "action_kwargs": {"time": 10}
     })
-    debug_print("  ✅ 初始等待动作已添加 ⏳✨")
-    
+
     # 2. 执行蒸发
-    debug_print(f"  🌪️ 动作2: 执行蒸发操作...")
-    debug_print(f"    🔧 设备: {rotavap_device}")
-    debug_print(f"    🥽 容器: {target_vessel}")
-    debug_print(f"    💨 真空度: {pressure} bar")
-    debug_print(f"    🌡️ 温度: {temp}°C")
-    debug_print(f"    ⏰ 时间: {final_time}s ({final_time/60:.1f}分钟)")
-    debug_print(f"    🌪️ 旋转速度: {stir_speed} RPM")
-    
     evaporate_action = {
         "device_id": rotavap_device,
         "action_name": "evaporate",
@@ -332,20 +221,17 @@ def generate_evaporate_protocol(
             "vessel": {"id": target_vessel},
             "pressure": float(pressure),
             "temp": float(temp),
-            "time": float(final_time),  # 🔧 强制转换为float类型
+            "time": float(final_time),
             "stir_speed": float(stir_speed),
             "solvent": str(solvent)
         }
     }
     action_sequence.append(evaporate_action)
-    debug_print("  ✅ 蒸发动作已添加 🌪️✨")
-    
-    # 🔧 新增：蒸发过程中的体积变化
-    debug_print("  🔧 更新容器体积 - 蒸发过程...")
+
+    # 蒸发过程中的体积变化
     if evaporation_volume > 0:
         new_volume = max(0.0, original_liquid_volume - evaporation_volume)
-        
-        # 更新vessel字典中的体积
+
         if "data" in vessel and "liquid_volume" in vessel["data"]:
             current_volume = vessel["data"]["liquid_volume"]
             if isinstance(current_volume, list):
@@ -357,15 +243,14 @@ def generate_evaporate_protocol(
                 vessel["data"]["liquid_volume"] = new_volume
             else:
                 vessel["data"]["liquid_volume"] = new_volume
-        
-        # 🔧 同时更新图中的容器数据
+
         if vessel_id in G.nodes():
             if 'data' not in G.nodes[vessel_id]:
                 G.nodes[vessel_id]['data'] = {}
-            
+
             vessel_node_data = G.nodes[vessel_id]['data']
             current_node_volume = vessel_node_data.get('liquid_volume', 0.0)
-            
+
             if isinstance(current_node_volume, list):
                 if len(current_node_volume) > 0:
                     G.nodes[vessel_id]['data']['liquid_volume'][0] = new_volume
@@ -373,18 +258,16 @@ def generate_evaporate_protocol(
                     G.nodes[vessel_id]['data']['liquid_volume'] = [new_volume]
             else:
                 G.nodes[vessel_id]['data']['liquid_volume'] = new_volume
-        
-        debug_print(f"  📊 蒸发体积变化: {original_liquid_volume:.2f}mL → {new_volume:.2f}mL (-{evaporation_volume:.2f}mL)")
-    
+
+        debug_print(f"蒸发体积变化: {original_liquid_volume:.2f}mL -> {new_volume:.2f}mL (-{evaporation_volume:.2f}mL)")
+
     # 3. 蒸发后等待
-    debug_print("  🔄 动作3: 添加蒸发后等待... ⏳")
     action_sequence.append({
         "action_name": "wait",
         "action_kwargs": {"time": 10}
     })
-    debug_print("  ✅ 蒸发后等待动作已添加 ⏳✨")
-    
-    # 🔧 新增：蒸发完成后的状态报告
+
+    # 最终状态
     final_liquid_volume = 0.0
     if "data" in vessel and "liquid_volume" in vessel["data"]:
         current_volume = vessel["data"]["liquid_volume"]
@@ -392,19 +275,7 @@ def generate_evaporate_protocol(
             final_liquid_volume = current_volume[0]
         elif isinstance(current_volume, (int, float)):
             final_liquid_volume = current_volume
-    
-    # === 总结 ===
-    debug_print("🎊" * 20)
-    debug_print(f"🎉 蒸发协议生成完成! ✨")
-    debug_print(f"📊 总动作数: {len(action_sequence)} 个 📝")
-    debug_print(f"🌪️ 旋转蒸发仪: {rotavap_device} 🔧")
-    debug_print(f"🥽 目标容器: {target_vessel} 🧪")
-    debug_print(f"⚙️ 蒸发参数: {pressure} bar 💨, {temp}°C 🌡️, {final_time}s ⏰, {stir_speed} RPM 🌪️")
-    debug_print(f"⏱️ 预计总时间: {(final_time + 20)/60:.1f} 分钟 ⌛")
-    debug_print(f"📊 体积变化:")
-    debug_print(f"  - 蒸发前: {original_liquid_volume:.2f}mL")
-    debug_print(f"  - 蒸发后: {final_liquid_volume:.2f}mL") 
-    debug_print(f"  - 蒸发量: {evaporation_volume:.2f}mL ({evaporation_volume/max(original_liquid_volume, 0.01)*100:.1f}%)")
-    debug_print("🎊" * 20)
-    
+
+    debug_print(f"蒸发协议生成完成: {len(action_sequence)} 个动作, 设备={rotavap_device}, 容器={target_vessel}")
+
     return action_sequence

unilabos/compile/filter_protocol.py

@@ -2,87 +2,64 @@ from typing import List, Dict, Any, Optional
 import networkx as nx
 import logging
 from .utils.vessel_parser import get_vessel
+from .utils.logger_util import debug_print
 from .pump_protocol import generate_pump_protocol_with_rinsing
 
 logger = logging.getLogger(__name__)
 
-def debug_print(message):
-    """调试输出"""
-    logger.info(f"[FILTER] {message}")
-
 def find_filter_device(G: nx.DiGraph) -> str:
     """查找过滤器设备"""
-    debug_print("🔍 查找过滤器设备... 🌊")
-    
-    # 查找过滤器设备
     for node in G.nodes():
         node_data = G.nodes[node]
         node_class = node_data.get('class', '') or ''
-        
+
         if 'filter' in node_class.lower() or 'filter' in node.lower():
-            debug_print(f"🎉 找到过滤器设备: {node} ✨")
+            debug_print(f"找到过滤器设备: {node}")
             return node
-    
-    # 如果没找到，寻找可能的过滤器名称
-    debug_print("🔎 在预定义名称中搜索过滤器... 📋")
+
     possible_names = ["filter", "filter_1", "virtual_filter", "filtration_unit"]
     for name in possible_names:
         if name in G.nodes():
-            debug_print(f"🎉 找到过滤器设备: {name} ✨")
+            debug_print(f"找到过滤器设备: {name}")
             return name
-    
-    debug_print("😭 未找到过滤器设备 💔")
+
     raise ValueError("未找到过滤器设备")
 
 def validate_vessel(G: nx.DiGraph, vessel: str, vessel_type: str = "容器") -> None:
     """验证容器是否存在"""
-    debug_print(f"🔍 验证{vessel_type}: '{vessel}' 🧪")
-    
     if not vessel:
-        debug_print(f"❌ {vessel_type}不能为空! 😱")
         raise ValueError(f"{vessel_type}不能为空")
-    
+
     if vessel not in G.nodes():
-        debug_print(f"❌ {vessel_type} '{vessel}' 不存在于系统中! 😞")
         raise ValueError(f"{vessel_type} '{vessel}' 不存在于系统中")
-    
-    debug_print(f"✅ {vessel_type} '{vessel}' 验证通过 🎯")
 
 def generate_filter_protocol(
     G: nx.DiGraph,
-    vessel: dict,  # 🔧 修改：从字符串改为字典类型
+    vessel: dict,
     filtrate_vessel: dict = {"id": "waste"},
     **kwargs
 ) -> List[Dict[str, Any]]:
     """
     生成过滤操作的协议序列 - 支持体积运算
-    
+
     Args:
         G: 设备图
         vessel: 过滤容器字典（必需）- 包含需要过滤的混合物
         filtrate_vessel: 滤液容器名称（可选）- 如果提供则收集滤液
         **kwargs: 其他参数（兼容性）
-    
+
     Returns:
         List[Dict[str, Any]]: 过滤操作的动作序列
     """
-    
-    # 🔧 核心修改：从字典中提取容器ID
+
     vessel_id, vessel_data = get_vessel(vessel)
     filtrate_vessel_id, filtrate_vessel_data = get_vessel(filtrate_vessel)
-    
-    debug_print("🌊" * 20)
-    debug_print("🚀 开始生成过滤协议（支持体积运算）✨")
-    debug_print(f"📝 输入参数:")
-    debug_print(f"  🥽 vessel: {vessel} (ID: {vessel_id})")
-    debug_print(f"  🧪 filtrate_vessel: {filtrate_vessel}")
-    debug_print(f"  ⚙️ 其他参数: {kwargs}")
-    debug_print("🌊" * 20)
-    
+
+    debug_print(f"开始生成过滤协议: vessel={vessel_id}, filtrate_vessel={filtrate_vessel_id}")
+
     action_sequence = []
-    
-    # 🔧 新增：记录过滤前的容器状态
-    debug_print("🔍 记录过滤前容器状态...")
+
+    # 记录过滤前的容器状态
     original_liquid_volume = 0.0
     if "data" in vessel and "liquid_volume" in vessel["data"]:
         current_volume = vessel["data"]["liquid_volume"]
@@ -90,79 +67,45 @@ def generate_filter_protocol(
             original_liquid_volume = current_volume[0]
         elif isinstance(current_volume, (int, float)):
             original_liquid_volume = current_volume
-    debug_print(f"📊 过滤前液体体积: {original_liquid_volume:.2f}mL")
-    
+
     # === 参数验证 ===
-    debug_print("📍 步骤1: 参数验证... 🔧")
-    
-    # 验证必需参数
-    debug_print("  🔍 验证必需参数...")
-    validate_vessel(G, vessel_id, "过滤容器")  # 🔧 使用 vessel_id
-    debug_print("  ✅ 必需参数验证完成 🎯")
-    
-    # 验证可选参数
-    debug_print("  🔍 验证可选参数...")
+    validate_vessel(G, vessel_id, "过滤容器")
+
     if filtrate_vessel:
         validate_vessel(G, filtrate_vessel_id, "滤液容器")
-        debug_print("  🌊 模式: 过滤并收集滤液 💧")
-    else:
-        debug_print("  🧱 模式: 过滤并收集固体 🔬")
-    debug_print("  ✅ 可选参数验证完成 🎯")
-    
+
     # === 查找设备 ===
-    debug_print("📍 步骤2: 查找设备... 🔍")
-    
     try:
-        debug_print("  🔎 搜索过滤器设备...")
         filter_device = find_filter_device(G)
-        debug_print(f"  🎉 使用过滤器设备: {filter_device} 🌊✨")
-        
+        debug_print(f"使用过滤器设备: {filter_device}")
     except Exception as e:
-        debug_print(f"  ❌ 设备查找失败: {str(e)} 😭")
         raise ValueError(f"设备查找失败: {str(e)}")
-    
-    # 🔧 新增：过滤效率和体积分配估算
-    debug_print("📍 步骤2.5: 过滤体积分配估算... 📊")
-    
-    # 估算过滤分离比例（基于经验数据）
-    solid_ratio = 0.1  # 假设10%是固体（保留在过滤器上）
-    liquid_ratio = 0.9  # 假设90%是液体（通过过滤器）
-    volume_loss_ratio = 0.05  # 假设5%体积损失（残留在过滤器等）
-    
-    # 从kwargs中获取过滤参数进行优化
+
+    # 过滤体积分配估算
+    solid_ratio = 0.1
+    liquid_ratio = 0.9
+    volume_loss_ratio = 0.05
+
     if "solid_content" in kwargs:
         try:
             solid_ratio = float(kwargs["solid_content"])
             liquid_ratio = 1.0 - solid_ratio
-            debug_print(f"📋 使用指定的固体含量: {solid_ratio*100:.1f}%")
         except:
-            debug_print("⚠️ 固体含量参数无效，使用默认值")
-    
+            pass
+
     if original_liquid_volume > 0:
         expected_filtrate_volume = original_liquid_volume * liquid_ratio * (1.0 - volume_loss_ratio)
         expected_solid_volume = original_liquid_volume * solid_ratio
         volume_loss = original_liquid_volume * volume_loss_ratio
-        
-        debug_print(f"📊 过滤体积分配估算:")
-        debug_print(f"  - 原始体积: {original_liquid_volume:.2f}mL")
-        debug_print(f"  - 预计滤液体积: {expected_filtrate_volume:.2f}mL ({liquid_ratio*100:.1f}%)")
-        debug_print(f"  - 预计固体体积: {expected_solid_volume:.2f}mL ({solid_ratio*100:.1f}%)")
-        debug_print(f"  - 预计损失体积: {volume_loss:.2f}mL ({volume_loss_ratio*100:.1f}%)")
-    
+
     # === 转移到过滤器（如果需要）===
-    debug_print("📍 步骤3: 转移到过滤器... 🚚")
-    
-    if vessel_id != filter_device:  # 🔧 使用 vessel_id
-        debug_print(f"  🚛 需要转移: {vessel_id} → {filter_device} 📦")
-        
+    if vessel_id != filter_device:
         try:
-            debug_print("  🔄 开始执行转移操作...")
-            # 使用pump protocol转移液体到过滤器
             transfer_actions = generate_pump_protocol_with_rinsing(
                 G=G,
-                from_vessel={"id": vessel_id},  # 🔧 使用 vessel_id
+                from_vessel={"id": vessel_id},
                 to_vessel={"id": filter_device},
-                volume=0.0,  # 转移所有液体
+                volume=0.0,
                 amount="",
                 time=0.0,
                 viscous=False,
@@ -173,88 +116,59 @@ def generate_filter_protocol(
                 flowrate=2.0,
                 transfer_flowrate=2.0
             )
-            
+
             if transfer_actions:
                 action_sequence.extend(transfer_actions)
-                debug_print(f"  ✅ 添加了 {len(transfer_actions)} 个转移动作 🚚✨")
-                
-                # 🔧 新增：转移后更新容器体积
-                debug_print("  🔧 更新转移后的容器体积...")
-                
-                # 原容器体积变为0（所有液体已转移）
+                debug_print(f"添加了 {len(transfer_actions)} 个转移动作")
+
+                # 更新容器体积
                 if "data" in vessel and "liquid_volume" in vessel["data"]:
                     current_volume = vessel["data"]["liquid_volume"]
                     if isinstance(current_volume, list):
                         vessel["data"]["liquid_volume"] = [0.0] if len(current_volume) > 0 else [0.0]
                     else:
                         vessel["data"]["liquid_volume"] = 0.0
-                
-                # 同时更新图中的容器数据
+
                 if vessel_id in G.nodes():
                     if 'data' not in G.nodes[vessel_id]:
                         G.nodes[vessel_id]['data'] = {}
                     G.nodes[vessel_id]['data']['liquid_volume'] = 0.0
-                
-                debug_print(f"  📊 转移完成，{vessel_id} 体积更新为 0.0mL")
-                
-            else:
-                debug_print("  ⚠️ 转移协议返回空序列 🤔")
-                
+
         except Exception as e:
-            debug_print(f"  ❌ 转移失败: {str(e)} 😞")
-            debug_print("  🔄 继续执行，可能是直接连接的过滤器 🤞")
-    else:
-        debug_print("  ✅ 过滤容器就是过滤器，无需转移 🎯")
-    
+            debug_print(f"转移失败: {str(e)}，继续执行")
+
     # === 执行过滤操作 ===
-    debug_print("📍 步骤4: 执行过滤操作... 🌊")
-    
-    # 构建过滤动作参数
-    debug_print("  ⚙️ 构建过滤参数...")
     filter_kwargs = {
-        "vessel": {"id": filter_device},  # 过滤器设备
-        "filtrate_vessel": {"id": filtrate_vessel_id},  # 滤液容器（可能为空）
+        "vessel": {"id": filter_device},
+        "filtrate_vessel": {"id": filtrate_vessel_id},
         "stir": kwargs.get("stir", False),
         "stir_speed": kwargs.get("stir_speed", 0.0),
         "temp": kwargs.get("temp", 25.0),
         "continue_heatchill": kwargs.get("continue_heatchill", False),
-        "volume": kwargs.get("volume", 0.0)  # 0表示过滤所有
+        "volume": kwargs.get("volume", 0.0)
     }
-    
-    debug_print(f"  📋 过滤参数: {filter_kwargs}")
-    debug_print("  🌊 开始过滤操作...")
-    
-    # 过滤动作
+
     filter_action = {
         "device_id": filter_device,
         "action_name": "filter",
         "action_kwargs": filter_kwargs
     }
     action_sequence.append(filter_action)
-    debug_print("  ✅ 过滤动作已添加 🌊✨")
-    
+
     # 过滤后等待
-    debug_print("  ⏳ 添加过滤后等待...")
     action_sequence.append({
         "action_name": "wait",
         "action_kwargs": {"time": 10.0}
     })
-    debug_print("  ✅ 过滤后等待动作已添加 ⏰✨")
-    
+
     # === 收集滤液（如果需要）===
-    debug_print("📍 步骤5: 收集滤液... 💧")
-    
     if filtrate_vessel_id and filtrate_vessel_id not in G.neighbors(filter_device):
-        debug_print(f"  🧪 收集滤液: {filter_device} → {filtrate_vessel_id} 💧")
-        
         try:
-            debug_print("  🔄 开始执行收集操作...")
-            # 使用pump protocol收集滤液
             collect_actions = generate_pump_protocol_with_rinsing(
                 G=G,
                 from_vessel=filter_device,
                 to_vessel=filtrate_vessel,
-                volume=0.0,  # 收集所有滤液
+                volume=0.0,
                 amount="",
                 time=0.0,
                 viscous=False,
@@ -265,19 +179,15 @@ def generate_filter_protocol(
                 flowrate=2.0,
                 transfer_flowrate=2.0
             )
-            
+
             if collect_actions:
                 action_sequence.extend(collect_actions)
-                debug_print(f"  ✅ 添加了 {len(collect_actions)} 个收集动作 🧪✨")
-                
-                # 🔧 新增：收集滤液后的体积更新
-                debug_print("  🔧 更新滤液容器体积...")
-                
-                # 更新filtrate_vessel在图中的体积（如果它是节点）
+
+                # 更新滤液容器体积
                 if filtrate_vessel_id in G.nodes():
                     if 'data' not in G.nodes[filtrate_vessel_id]:
                         G.nodes[filtrate_vessel_id]['data'] = {}
-                    
+
                     current_filtrate_volume = G.nodes[filtrate_vessel_id]['data'].get('liquid_volume', 0.0)
                     if isinstance(current_filtrate_volume, list):
                         if len(current_filtrate_volume) > 0:
@@ -286,58 +196,37 @@ def generate_filter_protocol(
                             G.nodes[filtrate_vessel_id]['data']['liquid_volume'] = [expected_filtrate_volume]
                     else:
                         G.nodes[filtrate_vessel_id]['data']['liquid_volume'] = current_filtrate_volume + expected_filtrate_volume
-                    
-                    debug_print(f"  📊 滤液容器 {filtrate_vessel_id} 体积增加 {expected_filtrate_volume:.2f}mL")
-                
-            else:
-                debug_print("  ⚠️ 收集协议返回空序列 🤔")
-                
+
         except Exception as e:
-            debug_print(f"  ❌ 收集滤液失败: {str(e)} 😞")
-            debug_print("  🔄 继续执行，可能滤液直接流入指定容器 🤞")
-    else:
-        debug_print("  🧱 未指定滤液容器，固体保留在过滤器中 🔬")
-    
-    # 🔧 新增：过滤完成后的容器状态更新
-    debug_print("📍 步骤5.5: 过滤完成后状态更新... 📊")
-    
+            debug_print(f"收集滤液失败: {str(e)}，继续执行")
+
+    # 过滤完成后容器状态更新
     if vessel_id == filter_device:
-        # 如果过滤容器就是过滤器，需要更新其体积状态
         if original_liquid_volume > 0:
             if filtrate_vessel:
-                # 收集滤液模式：过滤器中主要保留固体
                 remaining_volume = expected_solid_volume
-                debug_print(f"  🧱 过滤器中保留固体: {remaining_volume:.2f}mL")
             else:
-                # 保留固体模式：过滤器中保留所有物质
                 remaining_volume = original_liquid_volume * (1.0 - volume_loss_ratio)
-                debug_print(f"  🔬 过滤器中保留所有物质: {remaining_volume:.2f}mL")
-            
-            # 更新vessel字典中的体积
+
             if "data" in vessel and "liquid_volume" in vessel["data"]:
                 current_volume = vessel["data"]["liquid_volume"]
                 if isinstance(current_volume, list):
                     vessel["data"]["liquid_volume"] = [remaining_volume] if len(current_volume) > 0 else [remaining_volume]
                 else:
                     vessel["data"]["liquid_volume"] = remaining_volume
-            
-            # 同时更新图中的容器数据
+
             if vessel_id in G.nodes():
                 if 'data' not in G.nodes[vessel_id]:
                     G.nodes[vessel_id]['data'] = {}
                 G.nodes[vessel_id]['data']['liquid_volume'] = remaining_volume
-            
-            debug_print(f"  📊 过滤器 {vessel_id} 体积更新为: {remaining_volume:.2f}mL")
-    
+
     # === 最终等待 ===
-    debug_print("📍 步骤6: 最终等待... ⏰")
     action_sequence.append({
         "action_name": "wait",
         "action_kwargs": {"time": 5.0}
     })
-    debug_print("  ✅ 最终等待动作已添加 ⏰✨")
-    
-    # 🔧 新增：过滤完成后的状态报告
+
+    # 最终状态
     final_vessel_volume = 0.0
     if "data" in vessel and "liquid_volume" in vessel["data"]:
         current_volume = vessel["data"]["liquid_volume"]
@@ -345,22 +234,7 @@ def generate_filter_protocol(
             final_vessel_volume = current_volume[0]
         elif isinstance(current_volume, (int, float)):
             final_vessel_volume = current_volume
-    
-    # === 总结 ===
-    debug_print("🎊" * 20)
-    debug_print(f"🎉 过滤协议生成完成! ✨")
-    debug_print(f"📊 总动作数: {len(action_sequence)} 个 📝")
-    debug_print(f"🥽 过滤容器: {vessel_id} 🧪")
-    debug_print(f"🌊 过滤器设备: {filter_device} 🔧")
-    debug_print(f"💧 滤液容器: {filtrate_vessel_id or '无（保留固体）'} 🧱")
-    debug_print(f"⏱️ 预计总时间: {(len(action_sequence) * 5):.0f} 秒 ⌛")
-    if original_liquid_volume > 0:
-        debug_print(f"📊 体积变化统计:")
-        debug_print(f"  - 过滤前体积: {original_liquid_volume:.2f}mL")
-        debug_print(f"  - 过滤后容器体积: {final_vessel_volume:.2f}mL")
-        if filtrate_vessel:
-            debug_print(f"  - 预计滤液体积: {expected_filtrate_volume:.2f}mL")
-        debug_print(f"  - 预计损失体积: {volume_loss:.2f}mL")
-    debug_print("🎊" * 20)
-    
+
+    debug_print(f"过滤协议生成完成: {len(action_sequence)} 个动作, 容器={vessel_id}, 过滤器={filter_device}")
+
     return action_sequence

unilabos/compile/heatchill_protocol.py

@@ -1,118 +1,24 @@
 from typing import List, Dict, Any, Union
 import networkx as nx
-import logging
-import re
-from .utils.vessel_parser import get_vessel
-from .utils.unit_parser import parse_time_input
+from .utils.vessel_parser import get_vessel, find_connected_heatchill
+from .utils.unit_parser import parse_time_input, parse_temperature_input
+from .utils.logger_util import debug_print
 
-logger = logging.getLogger(__name__)
-
-def debug_print(message):
-    """调试输出"""
-    logger.info(f"[HEATCHILL] {message}")
-
-
-def parse_temp_input(temp_input: Union[str, float], default_temp: float = 25.0) -> float:
-    """
-    解析温度输入（统一函数）
-    
-    Args:
-        temp_input: 温度输入
-        default_temp: 默认温度
-        
-    Returns:
-        float: 温度（°C）
-    """
-    if not temp_input:
-        return default_temp
-    
-    # 🔢 数值输入
-    if isinstance(temp_input, (int, float)):
-        result = float(temp_input)
-        debug_print(f"🌡️ 数值温度: {temp_input} → {result}°C")
-        return result
-    
-    # 📝 字符串输入
-    temp_str = str(temp_input).lower().strip()
-    debug_print(f"🔍 解析温度: '{temp_str}'")
-    
-    # 🎯 特殊温度
-    special_temps = {
-        "room temperature": 25.0, "reflux": 78.0, "ice bath": 0.0,
-        "boiling": 100.0, "hot": 60.0, "warm": 40.0, "cold": 10.0
-    }
-    
-    if temp_str in special_temps:
-        result = special_temps[temp_str]
-        debug_print(f"🎯 特殊温度: '{temp_str}' → {result}°C")
-        return result
-    
-    # 📐 正则解析（如 "256 °C"）
-    temp_pattern = r'(\d+(?:\.\d+)?)\s*°?[cf]?'
-    match = re.search(temp_pattern, temp_str)
-    
-    if match:
-        result = float(match.group(1))
-        debug_print(f"✅ 温度解析: '{temp_str}' → {result}°C")
-        return result
-    
-    debug_print(f"⚠️ 无法解析温度: '{temp_str}'，使用默认值: {default_temp}°C")
-    return default_temp
-
-def find_connected_heatchill(G: nx.DiGraph, vessel: str) -> str:
-    """查找与指定容器相连的加热/冷却设备"""
-    debug_print(f"🔍 查找加热设备，目标容器: {vessel}")
-    
-    # 🔧 查找所有加热设备
-    heatchill_nodes = []
-    for node in G.nodes():
-        node_data = G.nodes[node]
-        node_class = node_data.get('class', '') or ''
-        
-        if 'heatchill' in node_class.lower() or 'virtual_heatchill' in node_class:
-            heatchill_nodes.append(node)
-            debug_print(f"🎉 找到加热设备: {node}")
-    
-    # 🔗 检查连接
-    if vessel and heatchill_nodes:
-        for heatchill in heatchill_nodes:
-            if G.has_edge(heatchill, vessel) or G.has_edge(vessel, heatchill):
-                debug_print(f"✅ 加热设备 '{heatchill}' 与容器 '{vessel}' 相连")
-                return heatchill
-    
-    # 🎯 使用第一个可用设备
-    if heatchill_nodes:
-        selected = heatchill_nodes[0]
-        debug_print(f"🔧 使用第一个加热设备: {selected}")
-        return selected
-    
-    # 🆘 默认设备
-    debug_print("⚠️ 未找到加热设备，使用默认设备")
-    return "heatchill_1"
 
 def validate_and_fix_params(temp: float, time: float, stir_speed: float) -> tuple:
     """验证和修正参数"""
-    # 🌡️ 温度范围验证
     if temp < -50.0 or temp > 300.0:
         debug_print(f"⚠️ 温度 {temp}°C 超出范围，修正为 25°C")
         temp = 25.0
-    else:
-        debug_print(f"✅ 温度 {temp}°C 在正常范围内")
-    
-    # ⏰ 时间验证
+
     if time < 0:
         debug_print(f"⚠️ 时间 {time}s 无效，修正为 300s")
         time = 300.0
-    else:
-        debug_print(f"✅ 时间 {time}s ({time/60:.1f}分钟) 有效")
-    
-    # 🌪️ 搅拌速度验证
+
     if stir_speed < 0 or stir_speed > 1500.0:
         debug_print(f"⚠️ 搅拌速度 {stir_speed} RPM 超出范围，修正为 300 RPM")
         stir_speed = 300.0
-    else:
-        debug_print(f"✅ 搅拌速度 {stir_speed} RPM 在正常范围内")
-    
+
     return temp, time, stir_speed
 
 def generate_heat_chill_protocol(
@@ -131,7 +37,7 @@ def generate_heat_chill_protocol(
 ) -> List[Dict[str, Any]]:
     """
     生成加热/冷却操作的协议序列 - 支持vessel字典
-    
+
     Args:
         G: 设备图
         vessel: 容器字典（从XDL传入）
@@ -145,82 +51,58 @@ def generate_heat_chill_protocol(
         stir_speed: 搅拌速度 (RPM)
         purpose: 操作目的说明
         **kwargs: 其他参数（兼容性）
-    
+
     Returns:
         List[Dict[str, Any]]: 加热/冷却操作的动作序列
     """
-    
+
     # 🔧 核心修改：从字典中提取容器ID
     vessel_id, vessel_data = get_vessel(vessel)
-    
-    debug_print("🌡️" * 20)
-    debug_print("🚀 开始生成加热冷却协议（支持vessel字典）✨")
-    debug_print(f"📝 输入参数:")
-    debug_print(f"  🥽 vessel: {vessel} (ID: {vessel_id})")
-    debug_print(f"  🌡️ temp: {temp}°C")
-    debug_print(f"  ⏰ time: {time}")
-    debug_print(f"  🎯 temp_spec: {temp_spec}")
-    debug_print(f"  ⏱️ time_spec: {time_spec}")
-    debug_print(f"  🌪️ stir: {stir} ({stir_speed} RPM)")
-    debug_print(f"  🎭 purpose: '{purpose}'")
-    debug_print("🌡️" * 20)
-    
-    # 📋 参数验证
-    debug_print("📍 步骤1: 参数验证... 🔧")
-    if not vessel_id:  # 🔧 使用 vessel_id
-        debug_print("❌ vessel 参数不能为空! 😱")
+
+    debug_print(f"开始生成加热冷却协议: vessel={vessel_id}, temp={temp}°C, "
+                f"time={time}, stir={stir} ({stir_speed} RPM), purpose='{purpose}'")
+
+    # 参数验证
+    if not vessel_id:
         raise ValueError("vessel 参数不能为空")
-    
-    if vessel_id not in G.nodes():  # 🔧 使用 vessel_id
-        debug_print(f"❌ 容器 '{vessel_id}' 不存在于系统中! 😞")
+
+    if vessel_id not in G.nodes():
         raise ValueError(f"容器 '{vessel_id}' 不存在于系统中")
-    
-    debug_print("✅ 基础参数验证通过 🎯")
-    
-    # 🔄 参数解析
-    debug_print("📍 步骤2: 参数解析... ⚡")
-    
-    #温度解析：优先使用 temp_spec
-    final_temp = parse_temp_input(temp_spec, temp) if temp_spec else temp
-    
+
+    # 参数解析
+    # 温度解析：优先使用 temp_spec
+    final_temp = parse_temperature_input(temp_spec, temp) if temp_spec else temp
+
     # 时间解析：优先使用 time_spec
     final_time = parse_time_input(time_spec) if time_spec else parse_time_input(time)
-    
+
     # 参数修正
     final_temp, final_time, stir_speed = validate_and_fix_params(final_temp, final_time, stir_speed)
-    
-    debug_print(f"🎯 最终参数: temp={final_temp}°C, time={final_time}s, stir_speed={stir_speed} RPM")
-    
-    # 🔍 查找设备
-    debug_print("📍 步骤3: 查找加热设备... 🔍")
+
+    debug_print(f"最终参数: temp={final_temp}°C, time={final_time}s, stir_speed={stir_speed} RPM")
+
+    # 查找设备
     try:
-        heatchill_id = find_connected_heatchill(G, vessel_id)  # 🔧 使用 vessel_id
-        debug_print(f"🎉 使用加热设备: {heatchill_id} ✨")
+        heatchill_id = find_connected_heatchill(G, vessel_id)
+        debug_print(f"使用加热设备: {heatchill_id}")
     except Exception as e:
-        debug_print(f"❌ 设备查找失败: {str(e)} 😭")
         raise ValueError(f"无法找到加热设备: {str(e)}")
-    
-    # 🚀 生成动作
-    debug_print("📍 步骤4: 生成加热动作... 🔥")
-    
-    # 🕐 模拟运行时间优化
-    debug_print("  ⏱️ 检查模拟运行时间限制...")
+
+    # 生成动作
+    # 模拟运行时间优化
     original_time = final_time
     simulation_time_limit = 100.0  # 模拟运行时间限制：100秒
-    
+
     if final_time > simulation_time_limit:
         final_time = simulation_time_limit
-        debug_print(f"  🎮 模拟运行优化: {original_time}s → {final_time}s (限制为{simulation_time_limit}s) ⚡")
-        debug_print(f"  📊 时间缩短: {original_time/60:.1f}分钟 → {final_time/60:.1f}分钟 🚀")
-    else:
-        debug_print(f"  ✅ 时间在限制内: {final_time}s ({final_time/60:.1f}分钟) 保持不变 🎯")
-    
+        debug_print(f"模拟运行优化: {original_time}s → {final_time}s (限制为{simulation_time_limit}s)")
+
     action_sequence = []
     heatchill_action = {
         "device_id": heatchill_id,
         "action_name": "heat_chill",
         "action_kwargs": {
-            "vessel": {"id": vessel},
+            "vessel": {"id": vessel_id},
             "temp": float(final_temp),
             "time": float(final_time),
             "stir": bool(stir),
@@ -229,21 +111,10 @@ def generate_heat_chill_protocol(
         }
     }
     action_sequence.append(heatchill_action)
-    debug_print("✅ 加热动作已添加 🔥✨")
-    
-    # 显示时间调整信息
-    if original_time != final_time:
-        debug_print(f"  🎭 模拟优化说明: 原计划 {original_time/60:.1f}分钟，实际模拟 {final_time/60:.1f}分钟 ⚡")
-    
-    # 🎊 总结
-    debug_print("🎊" * 20)
-    debug_print(f"🎉 加热冷却协议生成完成! ✨")
-    debug_print(f"📊 总动作数: {len(action_sequence)} 个")
-    debug_print(f"🥽 加热容器: {vessel_id}")
-    debug_print(f"🌡️ 目标温度: {final_temp}°C")
-    debug_print(f"⏰ 加热时间: {final_time}s ({final_time/60:.1f}分钟)")
-    debug_print("🎊" * 20)
-    
+
+    debug_print(f"加热冷却协议生成完成: {len(action_sequence)} 个动作, "
+                f"vessel={vessel_id}, temp={final_temp}°C, time={final_time}s")
+
     return action_sequence
 
 def generate_heat_chill_to_temp_protocol(
@@ -255,7 +126,7 @@ def generate_heat_chill_to_temp_protocol(
 ) -> List[Dict[str, Any]]:
     """生成加热到指定温度的协议（简化版）"""
     vessel_id, _ = get_vessel(vessel)
-    debug_print(f"🌡️ 生成加热到温度协议: {vessel_id} → {temp}°C")
+    debug_print(f"生成加热到温度协议: {vessel_id} → {temp}°C")
     return generate_heat_chill_protocol(G, vessel, temp, time, **kwargs)
 
 def generate_heat_chill_start_protocol(
@@ -266,21 +137,19 @@ def generate_heat_chill_start_protocol(
     **kwargs
 ) -> List[Dict[str, Any]]:
     """生成开始加热操作的协议序列"""
-    
+
     # 🔧 核心修改：从字典中提取容器ID
     vessel_id, _ = get_vessel(vessel)
-    
-    debug_print("🔥 开始生成启动加热协议 ✨")
-    debug_print(f"🥽 vessel: {vessel} (ID: {vessel_id}), 🌡️ temp: {temp}°C")
-    
+
+    debug_print(f"生成启动加热协议: vessel={vessel_id}, temp={temp}°C")
+
     # 基础验证
-    if not vessel_id or vessel_id not in G.nodes():  # 🔧 使用 vessel_id
-        debug_print("❌ 容器验证失败!")
+    if not vessel_id or vessel_id not in G.nodes():
         raise ValueError("vessel 参数无效")
-    
+
     # 查找设备
-    heatchill_id = find_connected_heatchill(G, vessel_id)  # 🔧 使用 vessel_id
-    
+    heatchill_id = find_connected_heatchill(G, vessel_id)
+
     # 生成动作
     action_sequence = [{
         "device_id": heatchill_id,
@@ -291,8 +160,8 @@ def generate_heat_chill_start_protocol(
             "vessel": {"id": vessel_id},
         }
     }]
-    
-    debug_print(f"✅ 启动加热协议生成完成 🎯")
+
+    debug_print(f"启动加热协议生成完成")
     return action_sequence
 
 def generate_heat_chill_stop_protocol(
@@ -301,21 +170,19 @@ def generate_heat_chill_stop_protocol(
     **kwargs
 ) -> List[Dict[str, Any]]:
     """生成停止加热操作的协议序列"""
-    
+
     # 🔧 核心修改：从字典中提取容器ID
     vessel_id, _ = get_vessel(vessel)
-    
-    debug_print("🛑 开始生成停止加热协议 ✨")
-    debug_print(f"🥽 vessel: {vessel} (ID: {vessel_id})")
-    
+
+    debug_print(f"生成停止加热协议: vessel={vessel_id}")
+
     # 基础验证
-    if not vessel_id or vessel_id not in G.nodes():  # 🔧 使用 vessel_id
-        debug_print("❌ 容器验证失败!")
+    if not vessel_id or vessel_id not in G.nodes():
         raise ValueError("vessel 参数无效")
-    
+
     # 查找设备
-    heatchill_id = find_connected_heatchill(G, vessel_id)  # 🔧 使用 vessel_id
-    
+    heatchill_id = find_connected_heatchill(G, vessel_id)
+
     # 生成动作
     action_sequence = [{
         "device_id": heatchill_id,
@@ -323,6 +190,6 @@ def generate_heat_chill_stop_protocol(
         "action_kwargs": {
         }
     }]
-    
-    debug_print(f"✅ 停止加热协议生成完成 🎯")
+
+    debug_print(f"停止加热协议生成完成")
     return action_sequence

unilabos/compile/hydrogenate_protocol.py

@@ -1,105 +1,50 @@
 import networkx as nx
 from typing import List, Dict, Any, Optional
 from .utils.vessel_parser import get_vessel
-
-
-def parse_temperature(temp_str: str) -> float:
-    """
-    解析温度字符串，支持多种格式
-    
-    Args:
-        temp_str: 温度字符串（如 "45 °C", "45°C", "45"）
-    
-    Returns:
-        float: 温度值（摄氏度）
-    """
-    try:
-        # 移除常见的温度单位和符号
-        temp_clean = temp_str.replace("°C", "").replace("°", "").replace("C", "").strip()
-        return float(temp_clean)
-    except ValueError:
-        print(f"HYDROGENATE: 无法解析温度 '{temp_str}'，使用默认温度 25°C")
-        return 25.0
-
-
-def parse_time(time_str: str) -> float:
-    """
-    解析时间字符串，支持多种格式
-    
-    Args:
-        time_str: 时间字符串（如 "2 h", "120 min", "7200 s"）
-    
-    Returns:
-        float: 时间值（秒）
-    """
-    try:
-        time_clean = time_str.lower().strip()
-        
-        # 处理小时
-        if "h" in time_clean:
-            hours = float(time_clean.replace("h", "").strip())
-            return hours * 3600.0
-        
-        # 处理分钟
-        if "min" in time_clean:
-            minutes = float(time_clean.replace("min", "").strip())
-            return minutes * 60.0
-        
-        # 处理秒
-        if "s" in time_clean:
-            seconds = float(time_clean.replace("s", "").strip())
-            return seconds
-        
-        # 默认按小时处理
-        return float(time_clean) * 3600.0
-    
-    except ValueError:
-        print(f"HYDROGENATE: 无法解析时间 '{time_str}'，使用默认时间 2小时")
-        return 7200.0  # 2小时
+from .utils.logger_util import debug_print
+from .utils.unit_parser import parse_temperature_input, parse_time_input
 
 
 def find_associated_solenoid_valve(G: nx.DiGraph, device_id: str) -> Optional[str]:
     """查找与指定设备相关联的电磁阀"""
     solenoid_valves = [
-        node for node in G.nodes() 
+        node for node in G.nodes()
         if ('solenoid' in (G.nodes[node].get('class') or '').lower()
             or 'solenoid_valve' in node)
     ]
-    
+
     # 通过网络连接查找直接相连的电磁阀
     for solenoid in solenoid_valves:
         if G.has_edge(device_id, solenoid) or G.has_edge(solenoid, device_id):
             return solenoid
-    
+
     # 通过命名规则查找关联的电磁阀
     device_type = ""
     if 'gas' in device_id.lower():
         device_type = "gas"
     elif 'h2' in device_id.lower() or 'hydrogen' in device_id.lower():
         device_type = "gas"
-    
+
     if device_type:
         for solenoid in solenoid_valves:
             if device_type in solenoid.lower():
                 return solenoid
-    
+
     return None
 
 
 def find_connected_device(G: nx.DiGraph, vessel: str, device_type: str) -> str:
     """
     查找与容器相连的指定类型设备
-    
+
     Args:
         G: 网络图
         vessel: 容器名称
         device_type: 设备类型 ('heater', 'stirrer', 'gas_source')
-    
+
     Returns:
         str: 设备ID，如果没有则返回None
     """
-    print(f"HYDROGENATE: 正在查找与容器 '{vessel}' 相连的 {device_type}...")
-    
     # 根据设备类型定义搜索关键词
     if device_type == 'heater':
         keywords = ['heater', 'heat', 'heatchill']
@@ -112,40 +57,38 @@ def find_connected_device(G: nx.DiGraph, vessel: str, device_type: str) -> str:
         device_class = 'virtual_gas_source'
     else:
         return None
-    
+
     # 查找设备节点
     device_nodes = []
     for node in G.nodes():
         node_data = G.nodes[node]
         node_name = node.lower()
         node_class = node_data.get('class', '').lower()
-        
-        # 通过名称匹配
+
         if any(keyword in node_name for keyword in keywords):
             device_nodes.append(node)
-        # 通过类型匹配
         elif device_class in node_class:
             device_nodes.append(node)
-    
-    print(f"HYDROGENATE: 找到的{device_type}节点: {device_nodes}")
-    
+
+    debug_print(f"找到的{device_type}节点: {device_nodes}")
+
     # 检查是否有设备与目标容器相连
     for device in device_nodes:
         if G.has_edge(device, vessel) or G.has_edge(vessel, device):
-            print(f"HYDROGENATE: 找到与容器 '{vessel}' 相连的{device_type}: {device}")
+            debug_print(f"找到与容器 '{vessel}' 相连的{device_type}: {device}")
             return device
-    
+
     # 如果没有直接连接，查找距离最近的设备
     for device in device_nodes:
         try:
             path = nx.shortest_path(G, source=device, target=vessel)
             if len(path) <= 3:  # 最多2个中间节点
-                print(f"HYDROGENATE: 找到距离较近的{device_type}: {device}")
+                debug_print(f"找到距离较近的{device_type}: {device}")
                 return device
         except nx.NetworkXNoPath:
             continue
-    
-    print(f"HYDROGENATE: 未找到与容器 '{vessel}' 相连的{device_type}")
+
+    debug_print(f"未找到与容器 '{vessel}' 相连的{device_type}")
     return None
 
 
@@ -158,36 +101,31 @@ def generate_hydrogenate_protocol(
 ) -> List[Dict[str, Any]]:
     """
     生成氢化反应协议序列 - 支持vessel字典
-    
+
     Args:
         G: 有向图，节点为容器和设备
         vessel: 反应容器字典（从XDL传入）
         temp: 反应温度（如 "45 °C"）
         time: 反应时间（如 "2 h"）
         **kwargs: 其他可选参数，但不使用
-    
+
     Returns:
         List[Dict[str, Any]]: 动作序列
     """
-    
+
     # 🔧 核心修改：从字典中提取容器ID
     vessel_id, vessel_data = get_vessel(vessel)
-    
+
     action_sequence = []
-    
+
     # 解析参数
-    temperature = parse_temperature(temp)
-    reaction_time = parse_time(time)
-    
-    print("🧪" * 20)
-    print(f"HYDROGENATE: 开始生成氢化反应协议（支持vessel字典）✨")
-    print(f"📝 输入参数:")
-    print(f"  🥽 vessel: {vessel} (ID: {vessel_id})")
-    print(f"  🌡️ 反应温度: {temperature}°C")
-    print(f"  ⏰ 反应时间: {reaction_time/3600:.1f} 小时")
-    print("🧪" * 20)
-    
-    # 🔧 新增：记录氢化前的容器状态（可选，氢化反应通常不改变体积）
+    temperature = parse_temperature_input(temp)
+    reaction_time = parse_time_input(time)
+
+    debug_print(f"开始生成氢化反应协议: vessel={vessel_id}, "
+                f"temp={temperature}°C, time={reaction_time/3600:.1f}h")
+
+    # 记录氢化前的容器状态
     original_liquid_volume = 0.0
     if "data" in vessel and "liquid_volume" in vessel["data"]:
         current_volume = vessel["data"]["liquid_volume"]
@@ -195,47 +133,36 @@ def generate_hydrogenate_protocol(
             original_liquid_volume = current_volume[0]
         elif isinstance(current_volume, (int, float)):
             original_liquid_volume = current_volume
-    print(f"📊 氢化前液体体积: {original_liquid_volume:.2f}mL")
-    
+
     # 1. 验证目标容器存在
-    print("📍 步骤1: 验证目标容器...")
-    if vessel_id not in G.nodes():  # 🔧 使用 vessel_id
-        print(f"⚠️ HYDROGENATE: 警告 - 容器 '{vessel_id}' 不存在于系统中，跳过氢化反应")
+    if vessel_id not in G.nodes():
+        debug_print(f"⚠️ 容器 '{vessel_id}' 不存在于系统中，跳过氢化反应")
         return action_sequence
-    print(f"✅ 容器 '{vessel_id}' 验证通过")
-    
+
     # 2. 查找相连的设备
-    print("📍 步骤2: 查找相连设备...")
-    heater_id = find_connected_device(G, vessel_id, 'heater')  # 🔧 使用 vessel_id
-    stirrer_id = find_connected_device(G, vessel_id, 'stirrer')  # 🔧 使用 vessel_id
-    gas_source_id = find_connected_device(G, vessel_id, 'gas_source')  # 🔧 使用 vessel_id
-    
-    print(f"🔧 设备配置:")
-    print(f"  🔥 加热器: {heater_id or '未找到'}")
-    print(f"  🌪️ 搅拌器: {stirrer_id or '未找到'}")
-    print(f"  💨 气源: {gas_source_id or '未找到'}")
-    
+    heater_id = find_connected_device(G, vessel_id, 'heater')
+    stirrer_id = find_connected_device(G, vessel_id, 'stirrer')
+    gas_source_id = find_connected_device(G, vessel_id, 'gas_source')
+
+    debug_print(f"设备配置: heater={heater_id or '未找到'}, "
+                f"stirrer={stirrer_id or '未找到'}, gas={gas_source_id or '未找到'}")
+
     # 3. 启动搅拌器
-    print("📍 步骤3: 启动搅拌器...")
     if stirrer_id:
-        print(f"🌪️ 启动搅拌器 {stirrer_id}")
         action_sequence.append({
             "device_id": stirrer_id,
             "action_name": "start_stir",
             "action_kwargs": {
-                "vessel": vessel_id,  # 🔧 使用 vessel_id
+                "vessel": {"id": vessel_id},
                 "stir_speed": 300.0,
                 "purpose": "氢化反应: 开始搅拌"
             }
         })
-        print("✅ 搅拌器启动动作已添加")
     else:
-        print(f"⚠️ HYDROGENATE: 警告 - 未找到搅拌器，继续执行")
-    
+        debug_print(f"⚠️ 未找到搅拌器，继续执行")
+
     # 4. 启动气源（氢气）
-    print("📍 步骤4: 启动氢气源...")
     if gas_source_id:
-        print(f"💨 启动气源 {gas_source_id} (氢气)")
         action_sequence.append({
             "device_id": gas_source_id,
             "action_name": "set_status",
@@ -243,11 +170,10 @@ def generate_hydrogenate_protocol(
                 "string": "ON"
             }
         })
-        
+
         # 查找相关的电磁阀
         gas_solenoid = find_associated_solenoid_valve(G, gas_source_id)
         if gas_solenoid:
-            print(f"🚪 开启气源电磁阀 {gas_solenoid}")
             action_sequence.append({
                 "device_id": gas_solenoid,
                 "action_name": "set_valve_position",
@@ -255,12 +181,10 @@ def generate_hydrogenate_protocol(
                     "command": "OPEN"
                 }
             })
-        print("✅ 氢气源启动动作已添加")
     else:
-        print(f"⚠️ HYDROGENATE: 警告 - 未找到气源，继续执行")
-    
+        debug_print(f"⚠️ 未找到气源，继续执行")
+
     # 5. 等待气体稳定
-    print("📍 步骤5: 等待气体环境稳定...")
     action_sequence.append({
         "action_name": "wait",
         "action_kwargs": {
@@ -268,22 +192,19 @@ def generate_hydrogenate_protocol(
             "description": "等待氢气环境稳定"
         }
     })
-    print("✅ 气体稳定等待动作已添加")
-    
+
     # 6. 启动加热器
-    print("📍 步骤6: 启动加热反应...")
     if heater_id:
-        print(f"🔥 启动加热器 {heater_id} 到 {temperature}°C")
         action_sequence.append({
             "device_id": heater_id,
             "action_name": "heat_chill_start",
             "action_kwargs": {
-                "vessel": vessel_id,  # 🔧 使用 vessel_id
+                "vessel": {"id": vessel_id},
                 "temp": temperature,
                 "purpose": f"氢化反应: 加热到 {temperature}°C"
             }
         })
-        
+
         # 等待温度稳定
         action_sequence.append({
             "action_name": "wait",
@@ -292,52 +213,38 @@ def generate_hydrogenate_protocol(
                 "description": f"等待温度稳定到 {temperature}°C"
             }
         })
-        
-        # 🕐 模拟运行时间优化
-        print("  ⏰ 检查模拟运行时间限制...")
+
+        # 模拟运行时间优化
         original_reaction_time = reaction_time
-        simulation_time_limit = 60.0  # 模拟运行时间限制：60秒
-        
+        simulation_time_limit = 60.0
+
         if reaction_time > simulation_time_limit:
             reaction_time = simulation_time_limit
-            print(f"  🎮 模拟运行优化: {original_reaction_time}s → {reaction_time}s (限制为{simulation_time_limit}s)")
-            print(f"  📊 时间缩短: {original_reaction_time/3600:.2f}小时 → {reaction_time/60:.1f}分钟")
-        else:
-            print(f"  ✅ 时间在限制内: {reaction_time}s ({reaction_time/60:.1f}分钟) 保持不变")
-        
+            debug_print(f"模拟运行优化: {original_reaction_time}s → {reaction_time}s")
+
         # 保持反应温度
         action_sequence.append({
             "device_id": heater_id,
             "action_name": "heat_chill",
             "action_kwargs": {
-                "vessel": vessel_id,  # 🔧 使用 vessel_id
+                "vessel": {"id": vessel_id},
                 "temp": temperature,
                 "time": reaction_time,
                 "purpose": f"氢化反应: 保持 {temperature}°C，反应 {reaction_time/60:.1f}分钟" + (f" (模拟时间)" if original_reaction_time != reaction_time else "")
             }
         })
-        
-        # 显示时间调整信息
-        if original_reaction_time != reaction_time:
-            print(f"  🎭 模拟优化说明: 原计划 {original_reaction_time/3600:.2f}小时，实际模拟 {reaction_time/60:.1f}分钟")
-        
-        print("✅ 加热反应动作已添加")
-            
+
     else:
-        print(f"⚠️ HYDROGENATE: 警告 - 未找到加热器，使用室温反应")
-        
-        # 🕐 室温反应也需要时间优化
-        print("  ⏰ 检查室温反应模拟时间限制...")
+        debug_print(f"⚠️ 未找到加热器，使用室温反应")
+
+        # 室温反应也需要时间优化
         original_reaction_time = reaction_time
-        simulation_time_limit = 60.0  # 模拟运行时间限制：60秒
-        
+        simulation_time_limit = 60.0
+
         if reaction_time > simulation_time_limit:
             reaction_time = simulation_time_limit
-            print(f"  🎮 室温反应时间优化: {original_reaction_time}s → {reaction_time}s")
-            print(f"  📊 时间缩短: {original_reaction_time/3600:.2f}小时 → {reaction_time/60:.1f}分钟")
-        else:
-            print(f"  ✅ 室温反应时间在限制内: {reaction_time}s 保持不变")
-        
+            debug_print(f"室温反应时间优化: {original_reaction_time}s → {reaction_time}s")
+
         # 室温反应，只等待时间
         action_sequence.append({
             "action_name": "wait",
@@ -346,28 +253,19 @@ def generate_hydrogenate_protocol(
                 "description": f"室温氢化反应 {reaction_time/60:.1f}分钟" + (f" (模拟时间)" if original_reaction_time != reaction_time else "")
             }
         })
-        
-        # 显示时间调整信息
-        if original_reaction_time != reaction_time:
-            print(f"  🎭 室温反应优化说明: 原计划 {original_reaction_time/3600:.2f}小时，实际模拟 {reaction_time/60:.1f}分钟")
-        
-        print("✅ 室温反应等待动作已添加")
-    
+
     # 7. 停止加热
-    print("📍 步骤7: 停止加热...")
     if heater_id:
         action_sequence.append({
             "device_id": heater_id,
             "action_name": "heat_chill_stop",
             "action_kwargs": {
-                "vessel": vessel_id,  # 🔧 使用 vessel_id
+                "vessel": {"id": vessel_id},
                 "purpose": "氢化反应完成，停止加热"
             }
         })
-        print("✅ 停止加热动作已添加")
-    
+
     # 8. 等待冷却
-    print("📍 步骤8: 等待冷却...")
     action_sequence.append({
         "action_name": "wait",
         "action_kwargs": {
@@ -375,15 +273,12 @@ def generate_hydrogenate_protocol(
             "description": "等待反应混合物冷却"
         }
     })
-    print("✅ 冷却等待动作已添加")
-    
+
     # 9. 停止气源
-    print("📍 步骤9: 停止氢气源...")
     if gas_source_id:
         # 先关闭电磁阀
         gas_solenoid = find_associated_solenoid_valve(G, gas_source_id)
         if gas_solenoid:
-            print(f"🚪 关闭气源电磁阀 {gas_solenoid}")
             action_sequence.append({
                 "device_id": gas_solenoid,
                 "action_name": "set_valve_position",
@@ -391,7 +286,7 @@ def generate_hydrogenate_protocol(
                     "command": "CLOSED"
                 }
             })
-        
+
         # 再关闭气源
         action_sequence.append({
             "device_id": gas_source_id,
@@ -400,59 +295,24 @@ def generate_hydrogenate_protocol(
                 "string": "OFF"
             }
         })
-        print("✅ 氢气源停止动作已添加")
-    
+
     # 10. 停止搅拌
-    print("📍 步骤10: 停止搅拌...")
     if stirrer_id:
         action_sequence.append({
             "device_id": stirrer_id,
             "action_name": "stop_stir",
             "action_kwargs": {
-                "vessel": vessel_id,  # 🔧 使用 vessel_id
+                "vessel": {"id": vessel_id},
                 "purpose": "氢化反应完成，停止搅拌"
             }
         })
-        print("✅ 停止搅拌动作已添加")
-    
-    # 🔧 新增：氢化完成后的状态（氢化反应通常不改变体积）
-    final_liquid_volume = original_liquid_volume  # 氢化反应体积基本不变
-    
+
+    # 氢化完成后的状态（氢化反应通常不改变体积）
+    final_liquid_volume = original_liquid_volume
+
     # 总结
-    print("🎊" * 20)
-    print(f"🎉 氢化反应协议生成完成! ✨")
-    print(f"📊 总动作数: {len(action_sequence)} 个")
-    print(f"🥽 反应容器: {vessel_id}")
-    print(f"🌡️ 反应温度: {temperature}°C")
-    print(f"⏰ 反应时间: {reaction_time/60:.1f}分钟")
-    print(f"⏱️ 预计总时间: {(reaction_time + 450)/3600:.1f} 小时")
-    print(f"📊 体积状态:")
-    print(f"  - 反应前体积: {original_liquid_volume:.2f}mL")
-    print(f"  - 反应后体积: {final_liquid_volume:.2f}mL (氢化反应体积基本不变)")
-    print("🎊" * 20)
-    
+    debug_print(f"氢化反应协议生成完成: {len(action_sequence)} 个动作, "
+                f"vessel={vessel_id}, temp={temperature}°C, time={reaction_time/60:.1f}min, "
+                f"volume={original_liquid_volume:.2f}→{final_liquid_volume:.2f}mL")
+
     return action_sequence
-
-
-# 测试函数
-def test_hydrogenate_protocol():
-    """测试氢化反应协议"""
-    print("🧪 === HYDROGENATE PROTOCOL 测试 === ✨")
-    
-    # 测试温度解析
-    test_temps = ["45 °C", "45°C", "45", "25 C", "invalid"]
-    for temp in test_temps:
-        parsed = parse_temperature(temp)
-        print(f"温度 '{temp}' -> {parsed}°C")
-    
-    # 测试时间解析
-    test_times = ["2 h", "120 min", "7200 s", "2", "invalid"]
-    for time in test_times:
-        parsed = parse_time(time)
-        print(f"时间 '{time}' -> {parsed/3600:.1f} 小时")
-    
-    print("✅ 测试完成 🎉")
-
-
-if __name__ == "__main__":
-    test_hydrogenate_protocol()

unilabos/compile/pump_protocol.py

@@ -2,99 +2,18 @@ import traceback
 import numpy as np
 import networkx as nx
 import asyncio
-import time as time_module  # 🔧 重命名time模块
+import time as time_module  # 重命名time模块
 from typing import List, Dict, Any
 import logging
 import sys
 
-from unilabos.compile.utils.vessel_parser import get_vessel
+from .utils.logger_util import debug_print
+from .utils.vessel_parser import get_vessel
+from .utils.resource_helper import get_resource_liquid_volume
 
 logger = logging.getLogger(__name__)
 
 
-def debug_print(message):
-    """强制输出调试信息"""
-    output = f"[TRANSFER] {message}"
-    logger.info(output)
-
-
-def get_vessel_liquid_volume(G: nx.DiGraph, vessel: str) -> float:
-    """
-    从容器节点的数据中获取液体体积
-    """
-    debug_print(f"🔍 开始读取容器 '{vessel}' 的液体体积...")
-
-    if vessel not in G.nodes():
-        logger.error(f"❌ 容器 '{vessel}' 不存在于系统图中")
-        debug_print(f"  - 系统中的容器: {list(G.nodes())}")
-        return 0.0
-
-    vessel_data = G.nodes[vessel].get('data', {})
-    debug_print(f"📋 容器 '{vessel}' 的数据结构: {vessel_data}")
-
-    total_volume = 0.0
-
-    # 方法1：检查 'liquid' 字段（列表格式）
-    debug_print("🔍 方法1: 检查 'liquid' 字段...")
-    if 'liquid' in vessel_data:
-        liquids = vessel_data['liquid']
-        debug_print(f"  - liquid 字段类型: {type(liquids)}")
-        debug_print(f"  - liquid 字段内容: {liquids}")
-
-        if isinstance(liquids, list):
-            debug_print(f"  - liquid 是列表，包含 {len(liquids)} 个元素")
-            for i, liquid in enumerate(liquids):
-                debug_print(f"    液体 {i + 1}: {liquid}")
-                if isinstance(liquid, dict):
-                    volume_keys = ['liquid_volume', 'volume', 'amount', 'quantity']
-                    for key in volume_keys:
-                        if key in liquid:
-                            try:
-                                vol = float(liquid[key])
-                                total_volume += vol
-                                debug_print(f"    ✅ 从 '{key}' 读取体积: {vol}mL")
-                                break
-                            except (ValueError, TypeError) as e:
-                                logger.warning(f"    ⚠️ 无法转换 '{key}': {liquid[key]} -> {str(e)}")
-                                continue
-        else:
-            debug_print(f"  - liquid 不是列表: {type(liquids)}")
-    else:
-        debug_print("  - 没有 'liquid' 字段")
-
-    # 方法2：检查直接的体积字段
-    debug_print("🔍 方法2: 检查直接体积字段...")
-    volume_keys = ['total_volume', 'volume', 'liquid_volume', 'amount', 'current_volume']
-    for key in volume_keys:
-        if key in vessel_data:
-            try:
-                vol = float(vessel_data[key])
-                total_volume = max(total_volume, vol)  # 取最大值
-                debug_print(f"  ✅ 从容器数据 '{key}' 读取体积: {vol}mL")
-                break
-            except (ValueError, TypeError) as e:
-                logger.warning(f"  ⚠️ 无法转换 '{key}': {vessel_data[key]} -> {str(e)}")
-                continue
-
-    # 方法3：检查 'state' 或 'status' 字段
-    debug_print("🔍 方法3: 检查 'state' 字段...")
-    if 'state' in vessel_data and isinstance(vessel_data['state'], dict):
-        state = vessel_data['state']
-        debug_print(f"  - state 字段内容: {state}")
-        if 'volume' in state:
-            try:
-                vol = float(state['volume'])
-                total_volume = max(total_volume, vol)
-                debug_print(f"  ✅ 从容器状态读取体积: {vol}mL")
-            except (ValueError, TypeError) as e:
-                logger.warning(f"  ⚠️ 无法转换 state.volume: {state['volume']} -> {str(e)}")
-    else:
-        debug_print("  - 没有 'state' 字段或不是字典")
-
-    debug_print(f"📊 容器 '{vessel}' 最终检测体积: {total_volume}mL")
-    return total_volume
-
-
 def is_integrated_pump(node_class: str, node_name: str = "") -> bool:
     """
     判断是否为泵阀一体设备
@@ -122,108 +41,77 @@ def is_integrated_pump(node_class: str, node_name: str = "") -> bool:
 
 def find_connected_pump(G, valve_node):
     """
-    查找与阀门相连的泵节点 - 修复版本
-    🔧 修复：区分电磁阀和多通阀，电磁阀不参与泵查找
+    查找与阀门相连的泵节点
+    区分电磁阀和多通阀，电磁阀不参与泵查找
     """
-    debug_print(f"🔍 查找与阀门 {valve_node} 相连的泵...")
-
-    # 🔧 关键修复：检查节点类型，电磁阀不应该查找泵
+    # 检查节点类型，电磁阀不应该查找泵
     node_data = G.nodes.get(valve_node, {})
     node_class = node_data.get("class", "") or ""
 
-    debug_print(f"  - 阀门类型: {node_class}")
-
     # 如果是电磁阀，不应该查找泵（电磁阀只是开关）
     if ("solenoid" in node_class.lower() or "solenoid_valve" in valve_node.lower()):
-        debug_print(f"  ⚠️ {valve_node} 是电磁阀，不应该查找泵节点")
         raise ValueError(f"电磁阀 {valve_node} 不应该参与泵查找逻辑")
 
     # 只有多通阀等复杂阀门才需要查找连接的泵
     if ("multiway" in node_class.lower() or "valve" in node_class.lower()):
-        debug_print(f"  - {valve_node} 是多通阀，查找连接的泵...")
         # 方法1：直接相邻的泵
         for neighbor in G.neighbors(valve_node):
             neighbor_class = G.nodes[neighbor].get("class", "") or ""
-            # 排除非 电磁阀 和 泵 的邻居
-            debug_print(f"    - 检查邻居 {neighbor}, class: {neighbor_class}")
             if "pump" in neighbor_class.lower():
-                debug_print(f"    ✅ 找到直接相连的泵: {neighbor}")
                 return neighbor
 
         # 方法2：通过路径查找泵（最多2跳）
-        debug_print(f"    - 未找到直接相连的泵，尝试路径查找...")
+        pump_nodes = [
+            node_id for node_id in G.nodes()
+            if "pump" in (G.nodes[node_id].get("class", "") or "").lower()
+        ]
 
-        # 获取所有泵节点
-        pump_nodes = []
-        for node_id in G.nodes():
-            node_class = G.nodes[node_id].get("class", "") or ""
-            if "pump" in node_class.lower():
-                pump_nodes.append(node_id)
-
-        debug_print(f"    - 系统中的泵节点: {pump_nodes}")
-
-        # 查找到泵的最短路径
         for pump_node in pump_nodes:
             try:
                 if nx.has_path(G, valve_node, pump_node):
                     path = nx.shortest_path(G, valve_node, pump_node)
-                    path_length = len(path) - 1
-                    debug_print(f"    - 到泵 {pump_node} 的路径: {path}, 距离: {path_length}")
-
-                    if path_length <= 2:  # 最多允许2跳
-                        debug_print(f"    ✅ 通过路径找到泵: {pump_node}")
+                    if len(path) - 1 <= 2:  # 最多允许2跳
                         return pump_node
             except nx.NetworkXNoPath:
                 continue
 
-    # 最终失败
-    debug_print(f"  ❌ 完全找不到泵节点")
     raise ValueError(f"未找到与阀 {valve_node} 相连的泵节点")
 
 
 def build_pump_valve_maps(G, pump_backbone):
     """
-    构建泵-阀门映射 - 修复版本
-    🔧 修复：过滤掉电磁阀，只处理需要泵的多通阀
+    构建泵-阀门映射
+    过滤掉电磁阀，只处理需要泵的多通阀
     """
     pumps_from_node = {}
     valve_from_node = {}
 
-    debug_print(f"🔧 构建泵-阀门映射，原始骨架: {pump_backbone}")
-
-    # 🔧 关键修复：过滤掉电磁阀
+    # 过滤掉电磁阀
     filtered_backbone = []
     for node in pump_backbone:
         node_data = G.nodes.get(node, {})
         node_class = node_data.get("class", "") or ""
 
-        # 跳过电磁阀
         if ("solenoid" in node_class.lower() or "solenoid_valve" in node.lower()):
-            debug_print(f"  - 跳过电磁阀: {node}")
             continue
 
         filtered_backbone.append(node)
 
-    debug_print(f"🔧 过滤后的骨架: {filtered_backbone}")
-
     for node in filtered_backbone:
         node_data = G.nodes.get(node, {})
         node_class = node_data.get("class", "") or ""
         if is_integrated_pump(node_class, node):
             pumps_from_node[node] = node
             valve_from_node[node] = node
-            debug_print(f"  - 集成泵-阀: {node}")
         else:
             try:
                 pump_node = find_connected_pump(G, node)
                 pumps_from_node[node] = pump_node
                 valve_from_node[node] = node
-                debug_print(f"  - 阀门 {node} -> 泵 {pump_node}")
-            except ValueError as e:
-                debug_print(f"  - 跳过节点 {node}: {str(e)}")
+            except ValueError:
                 continue
 
-    debug_print(f"🔧 最终映射: pumps={pumps_from_node}, valves={valve_from_node}")
+    debug_print(f"泵-阀映射: pumps={pumps_from_node}, valves={valve_from_node}")
     return pumps_from_node, valve_from_node
 
 
@@ -236,8 +124,8 @@ def generate_pump_protocol(
         transfer_flowrate: float = 0.5,
 ) -> List[Dict[str, Any]]:
     """
-    生成泵操作的动作序列 - 修复版本
-    🔧 修复：正确处理包含电磁阀的路径
+    生成泵操作的动作序列
+    正确处理包含电磁阀的路径
     """
     pump_action_sequence = []
     nodes = G.nodes(data=True)
@@ -256,7 +144,6 @@ def generate_pump_protocol(
         logger.warning(f"transfer_flowrate <= 0，使用默认值 {transfer_flowrate}mL/s")
 
     # 验证容器存在
-    debug_print(f"🔍 验证源容器 '{from_vessel_id}' 和目标容器 '{to_vessel_id}' 是否存在...")
     if from_vessel_id not in G.nodes():
         logger.error(f"源容器 '{from_vessel_id}' 不存在")
         return pump_action_sequence
@@ -272,28 +159,24 @@ def generate_pump_protocol(
         logger.error(f"无法找到从 '{from_vessel_id}' 到 '{to_vessel_id}' 的路径")
         return pump_action_sequence
 
-    # 🔧 关键修复：正确构建泵骨架，排除容器和电磁阀
+    # 正确构建泵骨架，排除容器和电磁阀
     pump_backbone = []
     for node in shortest_path:
-        # 跳过起始和结束容器
         if node == from_vessel_id or node == to_vessel_id:
             continue
 
-        # 跳过电磁阀（电磁阀不参与泵操作）
         node_data = G.nodes.get(node, {})
         node_class = node_data.get("class", "") or ""
         if ("solenoid" in node_class.lower() or "solenoid_valve" in node.lower()):
-            debug_print(f"PUMP_TRANSFER: 跳过电磁阀 {node}")
             continue
 
-        # 只包含多通阀和泵
         if ("multiway" in node_class.lower() or "valve" in node_class.lower() or "pump" in node_class.lower()):
             pump_backbone.append(node)
 
-    debug_print(f"PUMP_TRANSFER: 过滤后的泵骨架: {pump_backbone}")
+    debug_print(f"PUMP_TRANSFER: 泵骨架: {pump_backbone}")
 
     if not pump_backbone:
-        debug_print("PUMP_TRANSFER: 没有泵骨架节点，可能是直接容器连接或只有电磁阀")
+        debug_print("PUMP_TRANSFER: 没有泵骨架节点")
         return pump_action_sequence
 
     if transfer_flowrate == 0:
@@ -309,7 +192,7 @@ def generate_pump_protocol(
         debug_print("PUMP_TRANSFER: 没有可用的泵映射")
         return pump_action_sequence
 
-    # 🔧 修复：安全地获取最小转移体积
+    # 安全地获取最小转移体积
     try:
         min_transfer_volumes = []
         for node in pump_backbone:
@@ -339,19 +222,19 @@ def generate_pump_protocol(
     volume_left = volume
     debug_print(f"PUMP_TRANSFER: 需要 {repeats} 次转移，单次最大体积 {min_transfer_volume} mL")
 
-    # 🆕 只在开头打印总体概览
+    # 只在开头打印总体概览
     if repeats > 1:
-        debug_print(f"🔄 分批转移概览: 总体积 {volume:.2f}mL，需要 {repeats} 次转移")
-        logger.info(f"🔄 分批转移概览: 总体积 {volume:.2f}mL，需要 {repeats} 次转移")
+        debug_print(f"分批转移: 总体积 {volume:.2f}mL, {repeats} 次, 单次最大 {min_transfer_volume} mL")
+        logger.info(f"分批转移: 总体积 {volume:.2f}mL, {repeats} 次转移")
 
-    # 🔧 创建一个自定义的wait动作，用于在执行时打印日志
+    # 创建一个自定义的wait动作，用于在执行时打印日志
     def create_progress_log_action(message: str) -> Dict[str, Any]:
         """创建一个特殊的等待动作，在执行时打印进度日志"""
         return {
             "action_name": "wait",
             "action_kwargs": {
-                "time": 0.1,  # 很短的等待时间
-                "progress_message": message  # 自定义字段，用于进度日志
+                "time": 0.1,
+                "progress_message": message
             }
         }
 
@@ -359,12 +242,12 @@ def generate_pump_protocol(
     for i in range(repeats):
         current_volume = min(volume_left, min_transfer_volume)
 
-        # 🆕 在每次循环开始时添加进度日志
         if repeats > 1:
-            start_message = f"🚀 准备开始第 {i + 1}/{repeats} 次转移: {current_volume:.2f}mL ({from_vessel_id} → {to_vessel_id}) 🚰"
-            pump_action_sequence.append(create_progress_log_action(start_message))
+            pump_action_sequence.append(create_progress_log_action(
+                f"第 {i + 1}/{repeats} 次转移: {current_volume:.2f}mL ({from_vessel_id} -> {to_vessel_id})"
+            ))
 
-        # 🔧 修复：安全地获取边数据
+        # 安全地获取边数据
         def get_safe_edge_data(node_a, node_b, key):
             try:
                 edge_data = G.get_edge_data(node_a, node_b)
@@ -467,13 +350,13 @@ def generate_pump_protocol(
                 ])
                 pump_action_sequence.append({"action_name": "wait", "action_kwargs": {"time": 3}})
 
-        # 🆕 在每次循环结束时添加完成日志
+        # 在每次循环结束时添加完成日志
         if repeats > 1:
             remaining_volume = volume_left - current_volume
             if remaining_volume > 0:
-                end_message = f"✅ 第 {i + 1}/{repeats} 次转移完成! 剩余 {remaining_volume:.2f}mL 待转移 ⏳"
+                end_message = f"第 {i + 1}/{repeats} 次完成, 剩余 {remaining_volume:.2f}mL"
             else:
-                end_message = f"🎉 第 {i + 1}/{repeats} 次转移完成! 全部 {volume:.2f}mL 转移完毕 ✨"
+                end_message = f"第 {i + 1}/{repeats} 次完成, 全部 {volume:.2f}mL 转移完毕"
 
             pump_action_sequence.append(create_progress_log_action(end_message))
 
@@ -515,300 +398,205 @@ def generate_pump_protocol_with_rinsing(
     to_vessel_id, _ = get_vessel(to_vessel)
 
     with generate_pump_protocol_with_rinsing._lock:
-        debug_print("=" * 60)
-        debug_print(f"PUMP_TRANSFER: 🚀 开始生成协议 (同步版本)")
-        debug_print(f"  📍 路径: {from_vessel_id} -> {to_vessel_id}")
-        debug_print(f"  🕐 时间戳: {time_module.time()}")
-        debug_print(f"  🔒 获得执行锁")
-        debug_print("=" * 60)
+        debug_print(f"PUMP_TRANSFER: {from_vessel_id} -> {to_vessel_id}, volume={volume}, flowrate={flowrate}")
 
         # 短暂延迟，避免快速重复调用
         time_module.sleep(0.01)
 
-        debug_print("🔍 步骤1: 开始体积处理...")
-
         # 1. 处理体积参数
         final_volume = volume
-        debug_print(f"📋 初始设置: final_volume = {final_volume}")
 
-        # 🔧 修复：如果volume为0（ROS2传入的空值），从容器读取实际体积
+        # 如果volume为0，从容器读取实际体积
         if volume == 0.0:
-            debug_print("🎯 检测到 volume=0.0，开始自动体积检测...")
 
-            # 直接从源容器读取实际体积
-            actual_volume = get_vessel_liquid_volume(G, from_vessel_id)
-            debug_print(f"📖 从容器 '{from_vessel_id}' 读取到体积: {actual_volume}mL")
+            actual_volume = get_resource_liquid_volume(G.nodes.get(from_vessel_id, {}))
 
             if actual_volume > 0:
                 final_volume = actual_volume
-                debug_print(f"✅ 成功设置体积为: {final_volume}mL")
             else:
-                final_volume = 10.0  # 如果读取失败，使用默认值
-                logger.warning(f"⚠️ 无法从容器读取体积，使用默认值: {final_volume}mL")
-        else:
-            debug_print(f"📌 体积非零，直接使用: {final_volume}mL")
-
+                final_volume = 10.0
+                logger.warning(f"无法从容器读取体积，使用默认值: {final_volume}mL")
         # 处理 amount 参数
         if amount and amount.strip():
-            debug_print(f"🔍 检测到 amount 参数: '{amount}'，开始解析...")
             parsed_volume = _parse_amount_to_volume(amount)
-            debug_print(f"📖 从 amount 解析得到体积: {parsed_volume}mL")
 
             if parsed_volume > 0:
                 final_volume = parsed_volume
-                debug_print(f"✅ 使用从 amount 解析的体积: {final_volume}mL")
             elif parsed_volume == 0.0 and amount.lower().strip() == "all":
-                debug_print("🎯 检测到 amount='all'，从容器读取全部体积...")
-                actual_volume = get_vessel_liquid_volume(G, from_vessel_id)
+                actual_volume = get_resource_liquid_volume(G.nodes.get(from_vessel_id, {}))
                 if actual_volume > 0:
                     final_volume = actual_volume
-                    debug_print(f"✅ amount='all'，设置体积为: {final_volume}mL")
 
         # 最终体积验证
-        debug_print(f"🔍 步骤2: 最终体积验证...")
         if final_volume <= 0:
-            logger.error(f"❌ 体积无效: {final_volume}mL")
+            logger.error(f"体积无效: {final_volume}mL")
             final_volume = 10.0
-            logger.warning(f"⚠️ 强制设置为默认值: {final_volume}mL")
+            logger.warning(f"强制设置为默认值: {final_volume}mL")
 
-        debug_print(f"✅ 最终确定体积: {final_volume}mL")
+        debug_print(f"最终体积: {final_volume}mL")
 
         # 2. 处理流速参数
-        debug_print(f"🔍 步骤3: 处理流速参数...")
-        debug_print(f"  - 原始 flowrate: {flowrate}")
-        debug_print(f"  - 原始 transfer_flowrate: {transfer_flowrate}")
-
         final_flowrate = flowrate if flowrate > 0 else 2.5
         final_transfer_flowrate = transfer_flowrate if transfer_flowrate > 0 else 0.5
 
         if flowrate <= 0:
-            logger.warning(f"⚠️ flowrate <= 0，修正为: {final_flowrate}mL/s")
+            logger.warning(f"flowrate <= 0，修正为: {final_flowrate}mL/s")
         if transfer_flowrate <= 0:
-            logger.warning(f"⚠️ transfer_flowrate <= 0，修正为: {final_transfer_flowrate}mL/s")
-
-        debug_print(f"✅ 修正后流速: flowrate={final_flowrate}mL/s, transfer_flowrate={final_transfer_flowrate}mL/s")
+            logger.warning(f"transfer_flowrate <= 0，修正为: {final_transfer_flowrate}mL/s")
 
         # 3. 根据时间计算流速
         if time > 0 and final_volume > 0:
-            debug_print(f"🔍 步骤4: 根据时间计算流速...")
             calculated_flowrate = final_volume / time
-            debug_print(f"  - 计算得到流速: {calculated_flowrate}mL/s")
 
             if flowrate <= 0 or flowrate == 2.5:
                 final_flowrate = min(calculated_flowrate, 10.0)
-                debug_print(f"  - 调整 flowrate 为: {final_flowrate}mL/s")
             if transfer_flowrate <= 0 or transfer_flowrate == 0.5:
                 final_transfer_flowrate = min(calculated_flowrate, 5.0)
-                debug_print(f"  - 调整 transfer_flowrate 为: {final_transfer_flowrate}mL/s")
 
         # 4. 根据速度规格调整
         if rate_spec:
-            debug_print(f"🔍 步骤5: 根据速度规格调整...")
-            debug_print(f"  - 速度规格: '{rate_spec}'")
-
             if rate_spec == "dropwise":
                 final_flowrate = min(final_flowrate, 0.1)
                 final_transfer_flowrate = min(final_transfer_flowrate, 0.1)
-                debug_print(f"  - dropwise模式，流速调整为: {final_flowrate}mL/s")
             elif rate_spec == "slowly":
                 final_flowrate = min(final_flowrate, 0.5)
                 final_transfer_flowrate = min(final_transfer_flowrate, 0.3)
-                debug_print(f"  - slowly模式，流速调整为: {final_flowrate}mL/s")
             elif rate_spec == "quickly":
                 final_flowrate = max(final_flowrate, 5.0)
                 final_transfer_flowrate = max(final_transfer_flowrate, 2.0)
-                debug_print(f"  - quickly模式，流速调整为: {final_flowrate}mL/s")
+            debug_print(f"速度规格 '{rate_spec}': flowrate={final_flowrate}, transfer={final_transfer_flowrate}")
 
     # 5. 处理冲洗参数
-    debug_print(f"🔍 步骤6: 处理冲洗参数...")
     final_rinsing_solvent = rinsing_solvent
     final_rinsing_volume = rinsing_volume if rinsing_volume > 0 else 5.0
     final_rinsing_repeats = rinsing_repeats if rinsing_repeats > 0 else 2
 
     if rinsing_volume <= 0:
-        logger.warning(f"⚠️ rinsing_volume <= 0，修正为: {final_rinsing_volume}mL")
+        logger.warning(f"rinsing_volume <= 0，修正为: {final_rinsing_volume}mL")
     if rinsing_repeats <= 0:
-        logger.warning(f"⚠️ rinsing_repeats <= 0，修正为: {final_rinsing_repeats}次")
+        logger.warning(f"rinsing_repeats <= 0，修正为: {final_rinsing_repeats}次")
 
     # 根据物理属性调整冲洗参数
     if viscous or solid:
         final_rinsing_repeats = max(final_rinsing_repeats, 3)
         final_rinsing_volume = max(final_rinsing_volume, 10.0)
-        debug_print(f"🧪 粘稠/固体物质，调整冲洗参数：{final_rinsing_repeats}次，{final_rinsing_volume}mL")
 
     # 参数总结
-    debug_print("📊 最终参数总结:")
-    debug_print(f"  - 体积: {final_volume}mL")
-    debug_print(f"  - 流速: {final_flowrate}mL/s")
-    debug_print(f"  - 转移流速: {final_transfer_flowrate}mL/s")
-    debug_print(f"  - 冲洗溶剂: '{final_rinsing_solvent}'")
-    debug_print(f"  - 冲洗体积: {final_rinsing_volume}mL")
-    debug_print(f"  - 冲洗次数: {final_rinsing_repeats}次")
-
-    # ========== 执行基础转移 ==========
-
-    debug_print("🔧 步骤7: 开始执行基础转移...")
+    debug_print(f"最终参数: volume={final_volume}mL, flowrate={final_flowrate}mL/s, "
+                f"transfer_flowrate={final_transfer_flowrate}mL/s, "
+                f"rinsing={final_rinsing_solvent}/{final_rinsing_volume}mL/{final_rinsing_repeats}次")
 
+    # 执行基础转移
     try:
-        debug_print(f"  - 调用 generate_pump_protocol...")
-        debug_print(
-            f"  - 参数: G, '{from_vessel_id}', '{to_vessel_id}', {final_volume}, {final_flowrate}, {final_transfer_flowrate}")
 
         pump_action_sequence = generate_pump_protocol(
             G, from_vessel_id, to_vessel_id, final_volume,
             final_flowrate, final_transfer_flowrate
         )
 
-        debug_print(f"  - generate_pump_protocol 返回结果:")
-        debug_print(f"    - 动作序列长度: {len(pump_action_sequence)}")
-        debug_print(f"    - 动作序列是否为空: {len(pump_action_sequence) == 0}")
+        debug_print(f"基础转移生成了 {len(pump_action_sequence)} 个动作")
 
         if not pump_action_sequence:
-            debug_print("❌ 基础转移协议生成为空，可能是路径问题")
-            debug_print(f"  - 源容器存在: {from_vessel_id in G.nodes()}")
-            debug_print(f"  - 目标容器存在: {to_vessel_id in G.nodes()}")
+            debug_print("基础转移协议为空")
 
             if from_vessel_id in G.nodes() and to_vessel_id in G.nodes():
                 try:
                     path = nx.shortest_path(G, source=from_vessel_id, target=to_vessel_id)
-                    debug_print(f"  - 路径存在: {path}")
-                except Exception as path_error:
-                    debug_print(f"  - 无法找到路径: {str(path_error)}")
+                    debug_print(f"路径存在: {path}")
+                except Exception:
+                    pass
 
             return [
                 {
                     "device_id": "system",
                     "action_name": "log_message",
                     "action_kwargs": {
-                        "message": f"⚠️ 路径问题，无法转移: {final_volume}mL 从 {from_vessel_id} 到 {to_vessel_id}"
+                        "message": f"路径问题，无法转移: {final_volume}mL 从 {from_vessel_id} 到 {to_vessel_id}"
                     }
                 }
             ]
 
-        debug_print(f"✅ 基础转移生成了 {len(pump_action_sequence)} 个动作")
-
-        # 打印前几个动作用于调试
-        if len(pump_action_sequence) > 0:
-            debug_print("🔍 前几个动作预览:")
-            for i, action in enumerate(pump_action_sequence[:3]):
-                debug_print(f"  动作 {i + 1}: {action}")
-            if len(pump_action_sequence) > 3:
-                debug_print(f"  ... 还有 {len(pump_action_sequence) - 3} 个动作")
-
     except Exception as e:
-        debug_print(f"❌ 基础转移失败: {str(e)}")
-        import traceback
-        debug_print(f"详细错误: {traceback.format_exc()}")
+        debug_print(f"基础转移失败: {str(e)}\n{traceback.format_exc()}")
         return [
             {
                 "device_id": "system",
                 "action_name": "log_message",
                 "action_kwargs": {
-                    "message": f"❌ 转移失败: {final_volume}mL 从 {from_vessel_id} 到 {to_vessel_id}, 错误: {str(e)}"
+                    "message": f"转移失败: {final_volume}mL 从 {from_vessel_id} 到 {to_vessel_id}, 错误: {str(e)}"
                 }
             }
         ]
 
-    # ========== 执行冲洗操作 ==========
-
-    debug_print("🔧 步骤8: 检查冲洗操作...")
-
+    # 执行冲洗操作
     if final_rinsing_solvent and final_rinsing_solvent.strip() and final_rinsing_repeats > 0:
-        debug_print(f"🧽 开始冲洗操作，溶剂: '{final_rinsing_solvent}'")
 
         try:
             if final_rinsing_solvent.strip() != "air":
-                debug_print("  - 执行液体冲洗...")
                 rinsing_actions = _generate_rinsing_sequence(
                     G, from_vessel_id, to_vessel_id, final_rinsing_solvent,
                     final_rinsing_volume, final_rinsing_repeats,
                     final_flowrate, final_transfer_flowrate
                 )
                 pump_action_sequence.extend(rinsing_actions)
-                debug_print(f"  - 添加了 {len(rinsing_actions)} 个冲洗动作")
             else:
-                debug_print("  - 执行空气冲洗...")
                 air_rinsing_actions = _generate_air_rinsing_sequence(
                     G, from_vessel_id, to_vessel_id, final_rinsing_volume, final_rinsing_repeats,
                     final_flowrate, final_transfer_flowrate
                 )
                 pump_action_sequence.extend(air_rinsing_actions)
-                debug_print(f"  - 添加了 {len(air_rinsing_actions)} 个空气冲洗动作")
         except Exception as e:
-            debug_print(f"⚠️ 冲洗操作失败: {str(e)}，跳过冲洗")
+            debug_print(f"冲洗操作失败: {str(e)}")
     else:
-        debug_print(f"⏭️ 跳过冲洗操作")
-        debug_print(f"  - 溶剂: '{final_rinsing_solvent}'")
-        debug_print(f"  - 次数: {final_rinsing_repeats}")
-        debug_print(f"  - 条件满足: {bool(final_rinsing_solvent and final_rinsing_solvent.strip() and final_rinsing_repeats > 0)}")
+        debug_print(f"跳过冲洗 (solvent='{final_rinsing_solvent}', repeats={final_rinsing_repeats})")
 
-    # ========== 最终结果 ==========
-
-    debug_print("=" * 60)
-    debug_print(f"🎉 PUMP_TRANSFER: 协议生成完成")
-    debug_print(f"  📊 总动作数: {len(pump_action_sequence)}")
-    debug_print(f"  📋 最终体积: {final_volume}mL")
-    debug_print(f"  🚀 执行路径: {from_vessel_id} -> {to_vessel_id}")
+    # 最终结果
+    debug_print(f"PUMP_TRANSFER 完成: {from_vessel_id} -> {to_vessel_id}, "
+                f"volume={final_volume}mL, 动作数={len(pump_action_sequence)}")
 
     # 最终验证
     if len(pump_action_sequence) == 0:
-        debug_print("🚨 协议生成结果为空！这是异常情况")
         return [
             {
                 "device_id": "system",
                 "action_name": "log_message",
                 "action_kwargs": {
-                    "message": f"🚨 协议生成失败: 无法生成任何动作序列"
+                    "message": "协议生成失败: 无法生成任何动作序列"
                 }
             }
         ]
 
-    debug_print("=" * 60)
     return pump_action_sequence
 
 
 def _parse_amount_to_volume(amount: str) -> float:
     """解析 amount 字符串为体积"""
-    debug_print(f"🔍 解析 amount: '{amount}'")
-
     if not amount:
-        debug_print("  - amount 为空，返回 0.0")
         return 0.0
 
     amount = amount.lower().strip()
-    debug_print(f"  - 处理后的 amount: '{amount}'")
 
     # 处理特殊关键词
     if amount == "all":
-        debug_print("  - 检测到 'all'，返回 0.0（需要后续处理）")
         return 0.0  # 返回0.0，让调用者处理
 
     # 提取数字
     import re
     numbers = re.findall(r'[\d.]+', amount)
-    debug_print(f"  - 提取到的数字: {numbers}")
 
     if numbers:
         volume = float(numbers[0])
-        debug_print(f"  - 基础体积: {volume}")
 
         # 单位转换
         if 'ml' in amount or 'milliliter' in amount:
-            debug_print(f"  - 单位: mL，最终体积: {volume}")
             return volume
         elif 'l' in amount and 'ml' not in amount:
-            final_volume = volume * 1000
-            debug_print(f"  - 单位: L，最终体积: {final_volume}mL")
-            return final_volume
+            return volume * 1000
         elif 'μl' in amount or 'microliter' in amount:
-            final_volume = volume / 1000
-            debug_print(f"  - 单位: μL，最终体积: {final_volume}mL")
-            return final_volume
+            return volume / 1000
         else:
-            debug_print(f"  - 无单位，假设为 mL: {volume}")
-            return volume
+            return volume  # 默认mL
 
-    debug_print("  - 无法解析，返回 0.0")
     return 0.0
 
 

unilabos/compile/recrystallize_protocol.py

@@ -4,76 +4,64 @@ import logging
 from typing import List, Dict, Any, Tuple, Union
 from .utils.vessel_parser import get_vessel, find_solvent_vessel
 from .utils.unit_parser import parse_volume_input
+from .utils.logger_util import debug_print
 from .pump_protocol import generate_pump_protocol_with_rinsing
 
 logger = logging.getLogger(__name__)
 
-def debug_print(message):
-    """调试输出"""
-    logger.info(f"[RECRYSTALLIZE] {message}")
-
 
 def parse_ratio(ratio_str: str) -> Tuple[float, float]:
     """
     解析比例字符串，支持多种格式
-    
+
     Args:
         ratio_str: 比例字符串（如 "1:1", "3:7", "50:50"）
-    
+
     Returns:
         Tuple[float, float]: 比例元组 (ratio1, ratio2)
     """
-    debug_print(f"⚖️ 开始解析比例: '{ratio_str}' 📊")
-    
     try:
-        # 处理 "1:1", "3:7", "50:50" 等格式
         if ":" in ratio_str:
             parts = ratio_str.split(":")
             if len(parts) == 2:
                 ratio1 = float(parts[0])
                 ratio2 = float(parts[1])
-                debug_print(f"✅ 冒号格式解析成功: {ratio1}:{ratio2} 🎯")
                 return ratio1, ratio2
-        
-        # 处理 "1-1", "3-7" 等格式
+
         if "-" in ratio_str:
             parts = ratio_str.split("-")
             if len(parts) == 2:
                 ratio1 = float(parts[0])
                 ratio2 = float(parts[1])
-                debug_print(f"✅ 横线格式解析成功: {ratio1}:{ratio2} 🎯")
                 return ratio1, ratio2
-        
-        # 处理 "1,1", "3,7" 等格式
+
         if "," in ratio_str:
             parts = ratio_str.split(",")
             if len(parts) == 2:
                 ratio1 = float(parts[0])
                 ratio2 = float(parts[1])
-                debug_print(f"✅ 逗号格式解析成功: {ratio1}:{ratio2} 🎯")
                 return ratio1, ratio2
-        
-        # 默认 1:1
-        debug_print(f"⚠️ 无法解析比例 '{ratio_str}'，使用默认比例 1:1 🎭")
+
+        debug_print(f"无法解析比例 '{ratio_str}'，使用默认比例 1:1")
         return 1.0, 1.0
-    
+
     except ValueError:
-        debug_print(f"❌ 比例解析错误 '{ratio_str}'，使用默认比例 1:1 🎭")
+        debug_print(f"比例解析错误 '{ratio_str}'，使用默认比例 1:1")
         return 1.0, 1.0
 
 
 def generate_recrystallize_protocol(
     G: nx.DiGraph,
-    vessel: dict,  # 🔧 修改：从字符串改为字典类型
+    vessel: dict,
     ratio: str,
     solvent1: str,
     solvent2: str,
-    volume: Union[str, float],  # 支持字符串和数值
+    volume: Union[str, float],
     **kwargs
 ) -> List[Dict[str, Any]]:
     """
     生成重结晶协议序列 - 支持vessel字典和体积运算
-    
+
     Args:
         G: 有向图，节点为容器和设备
         vessel: 目标容器字典（从XDL传入）
@@ -82,28 +70,18 @@ def generate_recrystallize_protocol(
         solvent2: 第二种溶剂名称
         volume: 总体积（支持 "100 mL", "50", "2.5 L" 等）
         **kwargs: 其他可选参数
-    
+
     Returns:
         List[Dict[str, Any]]: 动作序列
     """
-    
-    # 🔧 核心修改：从字典中提取容器ID
+
     vessel_id, vessel_data = get_vessel(vessel)
-    
+
     action_sequence = []
-    
-    debug_print("💎" * 20)
-    debug_print("🚀 开始生成重结晶协议（支持vessel字典和体积运算）✨")
-    debug_print(f"📝 输入参数:")
-    debug_print(f"  🥽 vessel: {vessel} (ID: {vessel_id})")
-    debug_print(f"  ⚖️ 比例: {ratio}")
-    debug_print(f"  🧪 溶剂1: {solvent1}")
-    debug_print(f"  🧪 溶剂2: {solvent2}")
-    debug_print(f"  💧 总体积: {volume} (类型: {type(volume)})")
-    debug_print("💎" * 20)
-    
-    # 🔧 新增：记录重结晶前的容器状态
-    debug_print("🔍 记录重结晶前容器状态...")
+
+    debug_print(f"开始生成重结晶协议: vessel={vessel_id}, ratio={ratio}, solvent1={solvent1}, solvent2={solvent2}, volume={volume}")
+
+    # 记录重结晶前的容器状态
     original_liquid_volume = 0.0
     if "data" in vessel and "liquid_volume" in vessel["data"]:
         current_volume = vessel["data"]["liquid_volume"]
@@ -111,102 +89,73 @@ def generate_recrystallize_protocol(
             original_liquid_volume = current_volume[0]
         elif isinstance(current_volume, (int, float)):
             original_liquid_volume = current_volume
-    debug_print(f"📊 重结晶前液体体积: {original_liquid_volume:.2f}mL")
-    
+
     # 1. 验证目标容器存在
-    debug_print("📍 步骤1: 验证目标容器... 🔧")
-    if vessel_id not in G.nodes():  # 🔧 使用 vessel_id
-        debug_print(f"❌ 目标容器 '{vessel_id}' 不存在于系统中! 😱")
+    if vessel_id not in G.nodes():
         raise ValueError(f"目标容器 '{vessel_id}' 不存在于系统中")
-    debug_print(f"✅ 目标容器 '{vessel_id}' 验证通过 🎯")
-    
+
     # 2. 解析体积（支持单位）
-    debug_print("📍 步骤2: 解析体积（支持单位）... 💧")
     final_volume = parse_volume_input(volume, "mL")
-    debug_print(f"🎯 体积解析完成: {volume} → {final_volume}mL ✨")
-    
+    debug_print(f"体积解析: {volume} -> {final_volume}mL")
+
     # 3. 解析比例
-    debug_print("📍 步骤3: 解析比例... ⚖️")
     ratio1, ratio2 = parse_ratio(ratio)
     total_ratio = ratio1 + ratio2
-    debug_print(f"🎯 比例解析完成: {ratio1}:{ratio2} (总比例: {total_ratio}) ✨")
-    
+
     # 4. 计算各溶剂体积
-    debug_print("📍 步骤4: 计算各溶剂体积... 🧮")
     volume1 = final_volume * (ratio1 / total_ratio)
     volume2 = final_volume * (ratio2 / total_ratio)
-    
-    debug_print(f"🧪 {solvent1} 体积: {volume1:.2f} mL ({ratio1}/{total_ratio} × {final_volume})")
-    debug_print(f"🧪 {solvent2} 体积: {volume2:.2f} mL ({ratio2}/{total_ratio} × {final_volume})")
-    debug_print(f"✅ 体积计算完成: 总计 {volume1 + volume2:.2f} mL 🎯")
-    
+
+    debug_print(f"溶剂体积: {solvent1}={volume1:.2f}mL, {solvent2}={volume2:.2f}mL")
+
     # 5. 查找溶剂容器
-    debug_print("📍 步骤5: 查找溶剂容器... 🔍")
     try:
-        debug_print(f"  🔍 查找溶剂1容器...")
         solvent1_vessel = find_solvent_vessel(G, solvent1)
-        debug_print(f"  🎉 找到溶剂1容器: {solvent1_vessel} ✨")
     except ValueError as e:
-        debug_print(f"  ❌ 溶剂1容器查找失败: {str(e)} 😭")
         raise ValueError(f"无法找到溶剂1 '{solvent1}': {str(e)}")
-    
+
     try:
-        debug_print(f"  🔍 查找溶剂2容器...")
         solvent2_vessel = find_solvent_vessel(G, solvent2)
-        debug_print(f"  🎉 找到溶剂2容器: {solvent2_vessel} ✨")
     except ValueError as e:
-        debug_print(f"  ❌ 溶剂2容器查找失败: {str(e)} 😭")
         raise ValueError(f"无法找到溶剂2 '{solvent2}': {str(e)}")
-    
+
     # 6. 验证路径存在
-    debug_print("📍 步骤6: 验证传输路径... 🛤️")
     try:
-        path1 = nx.shortest_path(G, source=solvent1_vessel, target=vessel_id)  # 🔧 使用 vessel_id
-        debug_print(f"  🛤️ 溶剂1路径: {' → '.join(path1)} ✅")
+        path1 = nx.shortest_path(G, source=solvent1_vessel, target=vessel_id)
     except nx.NetworkXNoPath:
-        debug_print(f"  ❌ 溶剂1路径不可达: {solvent1_vessel} → {vessel_id} 😞")
         raise ValueError(f"从溶剂1容器 '{solvent1_vessel}' 到目标容器 '{vessel_id}' 没有可用路径")
-    
+
     try:
-        path2 = nx.shortest_path(G, source=solvent2_vessel, target=vessel_id)  # 🔧 使用 vessel_id
-        debug_print(f"  🛤️ 溶剂2路径: {' → '.join(path2)} ✅")
+        path2 = nx.shortest_path(G, source=solvent2_vessel, target=vessel_id)
     except nx.NetworkXNoPath:
-        debug_print(f"  ❌ 溶剂2路径不可达: {solvent2_vessel} → {vessel_id} 😞")
         raise ValueError(f"从溶剂2容器 '{solvent2_vessel}' 到目标容器 '{vessel_id}' 没有可用路径")
-    
+
     # 7. 添加第一种溶剂
-    debug_print("📍 步骤7: 添加第一种溶剂... 🧪")
-    debug_print(f"  🚰 开始添加溶剂1: {solvent1} ({volume1:.2f} mL)")
-    
     try:
         pump_actions1 = generate_pump_protocol_with_rinsing(
             G=G,
             from_vessel=solvent1_vessel,
-            to_vessel=vessel_id,  # 🔧 使用 vessel_id
-            volume=volume1,             # 使用解析后的体积
+            to_vessel=vessel_id,
+            volume=volume1,
             amount="",
             time=0.0,
             viscous=False,
-            rinsing_solvent="",  # 重结晶不需要清洗
+            rinsing_solvent="",
             rinsing_volume=0.0,
             rinsing_repeats=0,
             solid=False,
-            flowrate=2.0,  # 正常流速
+            flowrate=2.0,
             transfer_flowrate=0.5
         )
-        
+
         action_sequence.extend(pump_actions1)
-        debug_print(f"  ✅ 溶剂1泵送动作已添加: {len(pump_actions1)} 个动作 🚰✨")
-        
+
     except Exception as e:
-        debug_print(f"  ❌ 溶剂1泵协议生成失败: {str(e)} 😭")
         raise ValueError(f"生成溶剂1泵协议时出错: {str(e)}")
-    
-    # 🔧 新增：更新容器体积 - 添加溶剂1后
-    debug_print("  🔧 更新容器体积 - 添加溶剂1后...")
+
+    # 更新容器体积 - 添加溶剂1后
     new_volume_after_solvent1 = original_liquid_volume + volume1
-    
-    # 更新vessel字典中的体积
+
     if "data" in vessel and "liquid_volume" in vessel["data"]:
         current_volume = vessel["data"]["liquid_volume"]
         if isinstance(current_volume, list):
@@ -216,15 +165,14 @@ def generate_recrystallize_protocol(
                 vessel["data"]["liquid_volume"] = [new_volume_after_solvent1]
         else:
             vessel["data"]["liquid_volume"] = new_volume_after_solvent1
-    
-    # 同时更新图中的容器数据
+
     if vessel_id in G.nodes():
         if 'data' not in G.nodes[vessel_id]:
             G.nodes[vessel_id]['data'] = {}
-        
+
         vessel_node_data = G.nodes[vessel_id]['data']
         current_node_volume = vessel_node_data.get('liquid_volume', 0.0)
-        
+
         if isinstance(current_node_volume, list):
             if len(current_node_volume) > 0:
                 G.nodes[vessel_id]['data']['liquid_volume'][0] = new_volume_after_solvent1
@@ -232,53 +180,42 @@ def generate_recrystallize_protocol(
                 G.nodes[vessel_id]['data']['liquid_volume'] = [new_volume_after_solvent1]
         else:
             G.nodes[vessel_id]['data']['liquid_volume'] = new_volume_after_solvent1
-    
-    debug_print(f"  📊 体积更新: {original_liquid_volume:.2f}mL + {volume1:.2f}mL = {new_volume_after_solvent1:.2f}mL")
-    
+
     # 8. 等待溶剂1稳定
-    debug_print("  ⏳ 添加溶剂1稳定等待...")
     action_sequence.append({
         "action_name": "wait",
         "action_kwargs": {
-            "time": 5.0,  # 缩短等待时间
+            "time": 5.0,
             "description": f"等待溶剂1 {solvent1} 稳定"
         }
     })
-    debug_print("  ✅ 溶剂1稳定等待已添加 ⏰✨")
-    
+
     # 9. 添加第二种溶剂
-    debug_print("📍 步骤8: 添加第二种溶剂... 🧪")
-    debug_print(f"  🚰 开始添加溶剂2: {solvent2} ({volume2:.2f} mL)")
-    
     try:
         pump_actions2 = generate_pump_protocol_with_rinsing(
             G=G,
             from_vessel=solvent2_vessel,
-            to_vessel=vessel_id,  # 🔧 使用 vessel_id
-            volume=volume2,             # 使用解析后的体积
+            to_vessel=vessel_id,
+            volume=volume2,
             amount="",
             time=0.0,
             viscous=False,
-            rinsing_solvent="",  # 重结晶不需要清洗
+            rinsing_solvent="",
             rinsing_volume=0.0,
             rinsing_repeats=0,
             solid=False,
-            flowrate=2.0,  # 正常流速
+            flowrate=2.0,
             transfer_flowrate=0.5
         )
-        
+
         action_sequence.extend(pump_actions2)
-        debug_print(f"  ✅ 溶剂2泵送动作已添加: {len(pump_actions2)} 个动作 🚰✨")
-        
+
     except Exception as e:
-        debug_print(f"  ❌ 溶剂2泵协议生成失败: {str(e)} 😭")
         raise ValueError(f"生成溶剂2泵协议时出错: {str(e)}")
-    
-    # 🔧 新增：更新容器体积 - 添加溶剂2后
-    debug_print("  🔧 更新容器体积 - 添加溶剂2后...")
+
+    # 更新容器体积 - 添加溶剂2后
     final_liquid_volume = new_volume_after_solvent1 + volume2
-    
-    # 更新vessel字典中的体积
+
     if "data" in vessel and "liquid_volume" in vessel["data"]:
         current_volume = vessel["data"]["liquid_volume"]
         if isinstance(current_volume, list):
@@ -288,15 +225,14 @@ def generate_recrystallize_protocol(
                 vessel["data"]["liquid_volume"] = [final_liquid_volume]
         else:
             vessel["data"]["liquid_volume"] = final_liquid_volume
-    
-    # 同时更新图中的容器数据
+
     if vessel_id in G.nodes():
         if 'data' not in G.nodes[vessel_id]:
             G.nodes[vessel_id]['data'] = {}
-        
+
         vessel_node_data = G.nodes[vessel_id]['data']
         current_node_volume = vessel_node_data.get('liquid_volume', 0.0)
-        
+
         if isinstance(current_node_volume, list):
             if len(current_node_volume) > 0:
                 G.nodes[vessel_id]['data']['liquid_volume'][0] = final_liquid_volume
@@ -304,36 +240,25 @@ def generate_recrystallize_protocol(
                 G.nodes[vessel_id]['data']['liquid_volume'] = [final_liquid_volume]
         else:
             G.nodes[vessel_id]['data']['liquid_volume'] = final_liquid_volume
-    
-    debug_print(f"  📊 最终体积: {new_volume_after_solvent1:.2f}mL + {volume2:.2f}mL = {final_liquid_volume:.2f}mL")
-    
+
     # 10. 等待溶剂2稳定
-    debug_print("  ⏳ 添加溶剂2稳定等待...")
     action_sequence.append({
         "action_name": "wait",
         "action_kwargs": {
-            "time": 5.0,  # 缩短等待时间
+            "time": 5.0,
             "description": f"等待溶剂2 {solvent2} 稳定"
         }
     })
-    debug_print("  ✅ 溶剂2稳定等待已添加 ⏰✨")
-    
+
     # 11. 等待重结晶完成
-    debug_print("📍 步骤9: 等待重结晶完成... 💎")
-    
-    # 模拟运行时间优化
-    debug_print("  ⏱️ 检查模拟运行时间限制...")
-    original_crystallize_time = 600.0  # 原始重结晶时间
-    simulation_time_limit = 60.0  # 模拟运行时间限制：60秒
+    original_crystallize_time = 600.0
+    simulation_time_limit = 60.0
 
     final_crystallize_time = min(original_crystallize_time, simulation_time_limit)
-    
+
     if original_crystallize_time > simulation_time_limit:
-        debug_print(f"  🎮 模拟运行优化: {original_crystallize_time}s → {final_crystallize_time}s ⚡")
-        debug_print(f"  📊 时间缩短: {original_crystallize_time/60:.1f}分钟 → {final_crystallize_time/60:.1f}分钟 🚀")
-    else:
-        debug_print(f"  ✅ 时间在限制内: {final_crystallize_time}s 保持不变 🎯")
-    
+        debug_print(f"模拟运行优化: {original_crystallize_time}s -> {final_crystallize_time}s")
+
     action_sequence.append({
         "action_name": "wait",
         "action_kwargs": {
@@ -341,50 +266,28 @@ def generate_recrystallize_protocol(
             "description": f"等待重结晶完成（{solvent1}:{solvent2} = {ratio}，总体积 {final_volume}mL）" + (f" (模拟时间)" if original_crystallize_time != final_crystallize_time else "")
         }
     })
-    debug_print(f"  ✅ 重结晶等待已添加: {final_crystallize_time}s 💎✨")
-    
-    # 显示时间调整信息
-    if original_crystallize_time != final_crystallize_time:
-        debug_print(f"  🎭 模拟优化说明: 原计划 {original_crystallize_time/60:.1f}分钟，实际模拟 {final_crystallize_time/60:.1f}分钟 ⚡")
-    
-    # 总结
-    debug_print("💎" * 20)
-    debug_print(f"🎉 重结晶协议生成完成! ✨")
-    debug_print(f"📊 总动作数: {len(action_sequence)} 个")
-    debug_print(f"🥽 目标容器: {vessel_id}")
-    debug_print(f"💧 总体积变化:")
-    debug_print(f"  - 原始体积: {original_liquid_volume:.2f}mL")
-    debug_print(f"  - 添加溶剂: {final_volume:.2f}mL")
-    debug_print(f"  - 最终体积: {final_liquid_volume:.2f}mL")
-    debug_print(f"⚖️ 溶剂比例: {solvent1}:{solvent2} = {ratio1}:{ratio2}")
-    debug_print(f"🧪 溶剂1: {solvent1} ({volume1:.2f}mL)")
-    debug_print(f"🧪 溶剂2: {solvent2} ({volume2:.2f}mL)")
-    debug_print(f"⏱️ 预计总时间: {(final_crystallize_time + 10)/60:.1f} 分钟 ⌛")
-    debug_print("💎" * 20)
-    
+
+    debug_print(f"重结晶协议生成完成: {len(action_sequence)} 个动作, 容器={vessel_id}, 体积变化: {original_liquid_volume:.2f} -> {final_liquid_volume:.2f}mL")
+
     return action_sequence
 
 
 # 测试函数
 def test_recrystallize_protocol():
     """测试重结晶协议"""
-    debug_print("🧪 === RECRYSTALLIZE PROTOCOL 测试 === ✨")
-    
-    # 测试体积解析
-    debug_print("💧 测试体积解析...")
+    debug_print("=== RECRYSTALLIZE PROTOCOL 测试 ===")
+
     test_volumes = ["100 mL", "2.5 L", "500", "50.5", "?", "invalid"]
     for vol in test_volumes:
         parsed = parse_volume_input(vol)
-        debug_print(f"  📊 体积 '{vol}' -> {parsed}mL")
-    
-    # 测试比例解析
-    debug_print("⚖️ 测试比例解析...")
+        debug_print(f"体积 '{vol}' -> {parsed}mL")
+
     test_ratios = ["1:1", "3:7", "50:50", "1-1", "2,8", "invalid"]
     for ratio in test_ratios:
         r1, r2 = parse_ratio(ratio)
-        debug_print(f"  📊 比例 '{ratio}' -> {r1}:{r2}")
-    
-    debug_print("✅ 测试完成 🎉")
+        debug_print(f"比例 '{ratio}' -> {r1}:{r2}")
+
+    debug_print("测试完成")
 
 if __name__ == "__main__":
-    test_recrystallize_protocol()
+    test_recrystallize_protocol()

unilabos/compile/reset_handling_protocol.py

@@ -1,253 +1,87 @@
 import networkx as nx
 import logging
-import sys
 from typing import List, Dict, Any, Optional
+from .utils.logger_util import debug_print, action_log
+from .utils.vessel_parser import find_solvent_vessel
 from .pump_protocol import generate_pump_protocol_with_rinsing
 
 # 设置日志
 logger = logging.getLogger(__name__)
 
-# 确保输出编码为UTF-8
-if hasattr(sys.stdout, 'reconfigure'):
-    try:
-        sys.stdout.reconfigure(encoding='utf-8')
-        sys.stderr.reconfigure(encoding='utf-8')
-    except:
-        pass
-
-def debug_print(message):
-    """调试输出函数 - 支持中文"""
-    try:
-        # 确保消息是字符串格式
-        safe_message = str(message)
-        print(f"[重置处理] {safe_message}", flush=True)
-        logger.info(f"[重置处理] {safe_message}")
-    except UnicodeEncodeError:
-        # 如果编码失败，尝试替换不支持的字符
-        safe_message = str(message).encode('utf-8', errors='replace').decode('utf-8')
-        print(f"[重置处理] {safe_message}", flush=True)
-        logger.info(f"[重置处理] {safe_message}")
-    except Exception as e:
-        # 最后的安全措施
-        fallback_message = f"日志输出错误: {repr(message)}"
-        print(f"[重置处理] {fallback_message}", flush=True)
-        logger.info(f"[重置处理] {fallback_message}")
-
-def create_action_log(message: str, emoji: str = "📝") -> Dict[str, Any]:
-    """创建一个动作日志 - 支持中文和emoji"""
-    try:
-        full_message = f"{emoji} {message}"
-        debug_print(full_message)
-        logger.info(full_message)
-        
-        return {
-            "action_name": "wait",
-            "action_kwargs": {
-                "time": 0.1,
-                "log_message": full_message,
-                "progress_message": full_message
-            }
-        }
-    except Exception as e:
-        # 如果emoji有问题，使用纯文本
-        safe_message = f"[日志] {message}"
-        debug_print(safe_message)
-        logger.info(safe_message)
-        
-        return {
-            "action_name": "wait", 
-            "action_kwargs": {
-                "time": 0.1,
-                "log_message": safe_message,
-                "progress_message": safe_message
-            }
-        }
-
-def find_solvent_vessel(G: nx.DiGraph, solvent: str) -> str:
-    """
-    查找溶剂容器，支持多种匹配模式
-    
-    Args:
-        G: 网络图
-        solvent: 溶剂名称（如 "methanol", "ethanol", "water"）
-    
-    Returns:
-        str: 溶剂容器ID
-    """
-    debug_print(f"🔍 正在查找溶剂 '{solvent}' 的容器...")
-    
-    # 构建可能的容器名称
-    possible_names = [
-        f"flask_{solvent}",           # flask_methanol
-        f"bottle_{solvent}",          # bottle_methanol
-        f"reagent_{solvent}",         # reagent_methanol
-        f"reagent_bottle_{solvent}",  # reagent_bottle_methanol
-        f"{solvent}_flask",           # methanol_flask
-        f"{solvent}_bottle",          # methanol_bottle
-        f"{solvent}",                 # methanol
-        f"vessel_{solvent}",          # vessel_methanol
-    ]
-    
-    debug_print(f"🎯 候选容器名称: {possible_names[:3]}... (共{len(possible_names)}个)")
-    
-    # 第一步：通过容器名称匹配
-    debug_print("📋 方法1: 精确名称匹配...")
-    for vessel_name in possible_names:
-        if vessel_name in G.nodes():
-            debug_print(f"✅ 通过名称匹配找到容器: {vessel_name}")
-            return vessel_name
-    debug_print("⚠️ 精确名称匹配失败，尝试模糊匹配...")
-    
-    # 第二步：通过模糊匹配
-    debug_print("📋 方法2: 模糊名称匹配...")
-    for node_id in G.nodes():
-        if G.nodes[node_id].get('type') == 'container':
-            node_name = G.nodes[node_id].get('name', '').lower()
-            
-            # 检查是否包含溶剂名称
-            if solvent.lower() in node_id.lower() or solvent.lower() in node_name:
-                debug_print(f"✅ 通过模糊匹配找到容器: {node_id}")
-                return node_id
-    debug_print("⚠️ 模糊匹配失败，尝试液体类型匹配...")
-    
-    # 第三步：通过液体类型匹配
-    debug_print("📋 方法3: 液体类型匹配...")
-    for node_id in G.nodes():
-        if G.nodes[node_id].get('type') == 'container':
-            vessel_data = G.nodes[node_id].get('data', {})
-            liquids = vessel_data.get('liquid', [])
-            
-            for liquid in liquids:
-                if isinstance(liquid, dict):
-                    liquid_type = (liquid.get('liquid_type') or liquid.get('name', '')).lower()
-                    reagent_name = vessel_data.get('reagent_name', '').lower()
-                    
-                    if solvent.lower() in liquid_type or solvent.lower() in reagent_name:
-                        debug_print(f"✅ 通过液体类型匹配找到容器: {node_id}")
-                        return node_id
-    
-    # 列出可用容器帮助调试
-    debug_print("📊 显示可用容器信息...")
-    available_containers = []
-    for node_id in G.nodes():
-        if G.nodes[node_id].get('type') == 'container':
-            vessel_data = G.nodes[node_id].get('data', {})
-            liquids = vessel_data.get('liquid', [])
-            liquid_types = [liquid.get('liquid_type', '') or liquid.get('name', '') 
-                           for liquid in liquids if isinstance(liquid, dict)]
-            
-            available_containers.append({
-                'id': node_id,
-                'name': G.nodes[node_id].get('name', ''),
-                'liquids': liquid_types,
-                'reagent_name': vessel_data.get('reagent_name', '')
-            })
-    
-    debug_print(f"📋 可用容器列表 (共{len(available_containers)}个):")
-    for i, container in enumerate(available_containers[:5]):  # 只显示前5个
-        debug_print(f"  {i+1}. 🥽 {container['id']}: {container['name']}")
-        debug_print(f"     💧 液体: {container['liquids']}")
-        debug_print(f"     🧪 试剂: {container['reagent_name']}")
-    
-    if len(available_containers) > 5:
-        debug_print(f"    ... 还有 {len(available_containers)-5} 个容器")
-    
-    debug_print(f"❌ 找不到溶剂 '{solvent}' 对应的容器")
-    raise ValueError(f"找不到溶剂 '{solvent}' 对应的容器。尝试了: {possible_names[:3]}...")
+create_action_log = action_log
 
 def generate_reset_handling_protocol(
     G: nx.DiGraph,
     solvent: str,
-    vessel: Optional[str] = None,  # 🆕 新增可选vessel参数
-    **kwargs  # 接收其他可能的参数但不使用
+    vessel: Optional[str] = None,
+    **kwargs
 ) -> List[Dict[str, Any]]:
     """
     生成重置处理协议序列 - 支持自定义容器
-    
+
     Args:
         G: 有向图，节点为容器和设备
         solvent: 溶剂名称（从XDL传入）
         vessel: 目标容器名称（可选，默认为 "main_reactor"）
         **kwargs: 其他可选参数，但不使用
-    
+
     Returns:
         List[Dict[str, Any]]: 动作序列
     """
     action_sequence = []
-    
-    # 🔧 修改：支持自定义vessel参数
-    target_vessel = vessel if vessel is not None else "main_reactor"  # 默认目标容器
-    volume = 50.0  # 默认体积 50 mL
 
-    debug_print("=" * 60)
-    debug_print("🚀 开始生成重置处理协议")
-    debug_print(f"📋 输入参数:")
-    debug_print(f"  🧪 溶剂: {solvent}")
-    debug_print(f"  🥽 目标容器: {target_vessel} {'(默认)' if vessel is None else '(指定)'}")
-    debug_print(f"  💧 体积: {volume} mL")
-    debug_print(f"  ⚙️ 其他参数: {kwargs}")
-    debug_print("=" * 60)
-    
+    target_vessel = vessel if vessel is not None else "main_reactor"
+    volume = 50.0
+
+    debug_print(f"开始生成重置处理协议: solvent={solvent}, vessel={target_vessel}, volume={volume}mL")
+
     # 添加初始日志
-    action_sequence.append(create_action_log(f"开始重置处理操作 - 容器: {target_vessel}", "🎬"))
-    action_sequence.append(create_action_log(f"使用溶剂: {solvent}", "🧪"))
-    action_sequence.append(create_action_log(f"重置体积: {volume}mL", "💧"))
-    
+    action_sequence.append(action_log(f"开始重置处理操作 - 容器: {target_vessel}", "🎬"))
+    action_sequence.append(action_log(f"使用溶剂: {solvent}", "🧪"))
+    action_sequence.append(action_log(f"重置体积: {volume}mL", "💧"))
+
     if vessel is None:
-        action_sequence.append(create_action_log("使用默认目标容器: main_reactor", "⚙️"))
+        action_sequence.append(action_log("使用默认目标容器: main_reactor", "⚙️"))
     else:
-        action_sequence.append(create_action_log(f"使用指定目标容器: {vessel}", "🎯"))
-    
+        action_sequence.append(action_log(f"使用指定目标容器: {vessel}", "🎯"))
+
     # 1. 验证目标容器存在
-    debug_print("🔍 步骤1: 验证目标容器...")
-    action_sequence.append(create_action_log("正在验证目标容器...", "🔍"))
-    
+    action_sequence.append(action_log("正在验证目标容器...", "🔍"))
+
     if target_vessel not in G.nodes():
-        debug_print(f"❌ 目标容器 '{target_vessel}' 不存在于系统中!")
-        action_sequence.append(create_action_log(f"目标容器 '{target_vessel}' 不存在", "❌"))
+        action_sequence.append(action_log(f"目标容器 '{target_vessel}' 不存在", "❌"))
         raise ValueError(f"目标容器 '{target_vessel}' 不存在于系统中")
-    
-    debug_print(f"✅ 目标容器 '{target_vessel}' 验证通过")
-    action_sequence.append(create_action_log(f"目标容器验证通过: {target_vessel}", "✅"))
-    
+
+    action_sequence.append(action_log(f"目标容器验证通过: {target_vessel}", "✅"))
+
     # 2. 查找溶剂容器
-    debug_print("🔍 步骤2: 查找溶剂容器...")
-    action_sequence.append(create_action_log("正在查找溶剂容器...", "🔍"))
-    
+    action_sequence.append(action_log("正在查找溶剂容器...", "🔍"))
+
     try:
         solvent_vessel = find_solvent_vessel(G, solvent)
-        debug_print(f"✅ 找到溶剂容器: {solvent_vessel}")
-        action_sequence.append(create_action_log(f"找到溶剂容器: {solvent_vessel}", "✅"))
+        debug_print(f"找到溶剂容器: {solvent_vessel}")
+        action_sequence.append(action_log(f"找到溶剂容器: {solvent_vessel}", "✅"))
     except ValueError as e:
-        debug_print(f"❌ 溶剂容器查找失败: {str(e)}")
-        action_sequence.append(create_action_log(f"溶剂容器查找失败: {str(e)}", "❌"))
+        action_sequence.append(action_log(f"溶剂容器查找失败: {str(e)}", "❌"))
         raise ValueError(f"无法找到溶剂 '{solvent}': {str(e)}")
-    
+
     # 3. 验证路径存在
-    debug_print("🔍 步骤3: 验证传输路径...")
-    action_sequence.append(create_action_log("正在验证传输路径...", "🛤️"))
-    
+    action_sequence.append(action_log("正在验证传输路径...", "🛤️"))
+
     try:
         path = nx.shortest_path(G, source=solvent_vessel, target=target_vessel)
-        debug_print(f"✅ 找到路径: {' → '.join(path)}")
-        action_sequence.append(create_action_log(f"传输路径: {' → '.join(path)}", "🛤️"))
+        action_sequence.append(action_log(f"传输路径: {' → '.join(path)}", "🛤️"))
     except nx.NetworkXNoPath:
-        debug_print(f"❌ 路径不可达: {solvent_vessel} → {target_vessel}")
-        action_sequence.append(create_action_log(f"路径不可达: {solvent_vessel} → {target_vessel}", "❌"))
+        action_sequence.append(action_log(f"路径不可达: {solvent_vessel} → {target_vessel}", "❌"))
         raise ValueError(f"从溶剂容器 '{solvent_vessel}' 到目标容器 '{target_vessel}' 没有可用路径")
-    
+
     # 4. 使用pump_protocol转移溶剂
-    debug_print("🔍 步骤4: 转移溶剂...")
-    action_sequence.append(create_action_log("开始溶剂转移操作...", "🚰"))
-    
-    debug_print(f"🚛 开始转移: {solvent_vessel} → {target_vessel}")
-    debug_print(f"💧 转移体积: {volume} mL")
-    action_sequence.append(create_action_log(f"转移: {solvent_vessel} → {target_vessel} ({volume}mL)", "🚛"))
-    
+    action_sequence.append(action_log("开始溶剂转移操作...", "🚰"))
+    action_sequence.append(action_log(f"转移: {solvent_vessel} → {target_vessel} ({volume}mL)", "🚛"))
+
     try:
-        debug_print("🔄 生成泵送协议...")
-        action_sequence.append(create_action_log("正在生成泵送协议...", "🔄"))
-        
+        action_sequence.append(action_log("正在生成泵送协议...", "🔄"))
+
         pump_actions = generate_pump_protocol_with_rinsing(
             G=G,
             from_vessel=solvent_vessel,
@@ -256,41 +90,34 @@ def generate_reset_handling_protocol(
             amount="",
             time=0.0,
             viscous=False,
-            rinsing_solvent="",  # 重置处理不需要清洗
+            rinsing_solvent="",
             rinsing_volume=0.0,
             rinsing_repeats=0,
             solid=False,
-            flowrate=2.5,  # 正常流速
-            transfer_flowrate=0.5  # 正常转移流速
+            flowrate=2.5,
+            transfer_flowrate=0.5
         )
-        
+
         action_sequence.extend(pump_actions)
-        debug_print(f"✅ 泵送协议已添加: {len(pump_actions)} 个动作")
-        action_sequence.append(create_action_log(f"泵送协议完成 ({len(pump_actions)} 个操作)", "✅"))
-        
+        debug_print(f"泵送协议已添加: {len(pump_actions)} 个动作")
+        action_sequence.append(action_log(f"泵送协议完成 ({len(pump_actions)} 个操作)", "✅"))
+
     except Exception as e:
-        debug_print(f"❌ 泵送协议生成失败: {str(e)}")
-        action_sequence.append(create_action_log(f"泵送协议生成失败: {str(e)}", "❌"))
+        action_sequence.append(action_log(f"泵送协议生成失败: {str(e)}", "❌"))
         raise ValueError(f"生成泵协议时出错: {str(e)}")
-    
+
     # 5. 等待溶剂稳定
-    debug_print("🔍 步骤5: 等待溶剂稳定...")
-    action_sequence.append(create_action_log("等待溶剂稳定...", "⏳"))
-    
-    # 模拟运行时间优化
-    debug_print("⏱️ 检查模拟运行时间限制...")
-    original_wait_time = 10.0  # 原始等待时间
-    simulation_time_limit = 5.0  # 模拟运行时间限制：5秒
-    
+    action_sequence.append(action_log("等待溶剂稳定...", "⏳"))
+
+    original_wait_time = 10.0
+    simulation_time_limit = 5.0
     final_wait_time = min(original_wait_time, simulation_time_limit)
-    
+
     if original_wait_time > simulation_time_limit:
-        debug_print(f"🎮 模拟运行优化: {original_wait_time}s → {final_wait_time}s")
-        action_sequence.append(create_action_log(f"时间优化: {original_wait_time}s → {final_wait_time}s", "⚡"))
+        action_sequence.append(action_log(f"时间优化: {original_wait_time}s → {final_wait_time}s", "⚡"))
     else:
-        debug_print(f"✅ 时间在限制内: {final_wait_time}s 保持不变")
-        action_sequence.append(create_action_log(f"等待时间: {final_wait_time}s", "⏰"))
-    
+        action_sequence.append(action_log(f"等待时间: {final_wait_time}s", "⏰"))
+
     action_sequence.append({
         "action_name": "wait",
         "action_kwargs": {
@@ -298,90 +125,50 @@ def generate_reset_handling_protocol(
             "description": f"等待溶剂 {solvent} 在容器 {target_vessel} 中稳定" + (f" (模拟时间)" if original_wait_time != final_wait_time else "")
         }
     })
-    debug_print(f"✅ 稳定等待已添加: {final_wait_time}s")
-    
-    # 显示时间调整信息
+
     if original_wait_time != final_wait_time:
-        debug_print(f"🎭 模拟优化说明: 原计划 {original_wait_time}s，实际模拟 {final_wait_time}s")
-        action_sequence.append(create_action_log("应用模拟时间优化", "🎭"))
-    
+        action_sequence.append(action_log("应用模拟时间优化", "🎭"))
+
     # 总结
-    debug_print("=" * 60)
-    debug_print(f"🎉 重置处理协议生成完成!")
-    debug_print(f"📊 总结信息:")
-    debug_print(f"  📋 总动作数: {len(action_sequence)} 个")
-    debug_print(f"  🧪 溶剂: {solvent}")
-    debug_print(f"  🥽 源容器: {solvent_vessel}")
-    debug_print(f"  🥽 目标容器: {target_vessel} {'(默认)' if vessel is None else '(指定)'}")
-    debug_print(f"  💧 转移体积: {volume} mL")
-    debug_print(f"  ⏱️ 预计总时间: {(final_wait_time + 5):.0f} 秒")
-    debug_print(f"  🎯 操作结果: 已添加 {volume} mL {solvent} 到 {target_vessel}")
-    debug_print("=" * 60)
-    
-    # 添加完成日志
+    debug_print(f"重置处理协议生成完成: {len(action_sequence)} 个动作, {solvent_vessel} -> {target_vessel}, {volume}mL")
+
     summary_msg = f"重置处理完成: {target_vessel} (使用 {volume}mL {solvent})"
     if vessel is None:
         summary_msg += " [默认容器]"
     else:
         summary_msg += " [指定容器]"
-    
-    action_sequence.append(create_action_log(summary_msg, "🎉"))
-    
+
+    action_sequence.append(action_log(summary_msg, "🎉"))
+
     return action_sequence
 
 # === 便捷函数 ===
 
 def reset_main_reactor(G: nx.DiGraph, solvent: str = "methanol", **kwargs) -> List[Dict[str, Any]]:
     """重置主反应器 (默认行为)"""
-    debug_print(f"🔄 重置主反应器，使用溶剂: {solvent}")
     return generate_reset_handling_protocol(G, solvent=solvent, vessel=None, **kwargs)
 
 def reset_custom_vessel(G: nx.DiGraph, vessel: str, solvent: str = "methanol", **kwargs) -> List[Dict[str, Any]]:
     """重置指定容器"""
-    debug_print(f"🔄 重置指定容器: {vessel}，使用溶剂: {solvent}")
     return generate_reset_handling_protocol(G, solvent=solvent, vessel=vessel, **kwargs)
 
 def reset_with_water(G: nx.DiGraph, vessel: Optional[str] = None, **kwargs) -> List[Dict[str, Any]]:
     """使用水重置容器"""
-    target = vessel or "main_reactor"
-    debug_print(f"💧 使用水重置容器: {target}")
     return generate_reset_handling_protocol(G, solvent="water", vessel=vessel, **kwargs)
 
 def reset_with_methanol(G: nx.DiGraph, vessel: Optional[str] = None, **kwargs) -> List[Dict[str, Any]]:
     """使用甲醇重置容器"""
-    target = vessel or "main_reactor"
-    debug_print(f"🧪 使用甲醇重置容器: {target}")
     return generate_reset_handling_protocol(G, solvent="methanol", vessel=vessel, **kwargs)
 
 def reset_with_ethanol(G: nx.DiGraph, vessel: Optional[str] = None, **kwargs) -> List[Dict[str, Any]]:
     """使用乙醇重置容器"""
-    target = vessel or "main_reactor"
-    debug_print(f"🧪 使用乙醇重置容器: {target}")
     return generate_reset_handling_protocol(G, solvent="ethanol", vessel=vessel, **kwargs)
 
 # 测试函数
 def test_reset_handling_protocol():
     """测试重置处理协议"""
-    debug_print("=== 重置处理协议增强中文版测试 ===")
-    
-    # 测试溶剂名称
-    debug_print("🧪 测试常用溶剂名称...")
-    test_solvents = ["methanol", "ethanol", "water", "acetone", "dmso"]
-    for solvent in test_solvents:
-        debug_print(f"  🔍 测试溶剂: {solvent}")
-    
-    # 测试容器参数
-    debug_print("🥽 测试容器参数...")
-    test_cases = [
-        {"solvent": "methanol", "vessel": None, "desc": "默认容器"},
-        {"solvent": "ethanol", "vessel": "reactor_2", "desc": "指定容器"},
-        {"solvent": "water", "vessel": "flask_1", "desc": "自定义容器"}
-    ]
-    
-    for case in test_cases:
-        debug_print(f"  🧪 测试案例: {case['desc']} - {case['solvent']} -> {case['vessel'] or 'main_reactor'}")
-    
-    debug_print("✅ 测试完成")
+    debug_print("=== 重置处理协议测试 ===")
+    debug_print("测试完成")
 
 if __name__ == "__main__":
-    test_reset_handling_protocol()
+    test_reset_handling_protocol()

unilabos/compile/run_column_protocol.py

@@ -2,60 +2,54 @@ from typing import List, Dict, Any, Union
 import networkx as nx
 import logging
 import re
-from .utils.vessel_parser import get_vessel
+from .utils.vessel_parser import get_vessel, find_solvent_vessel
+from .utils.resource_helper import get_resource_id, get_resource_data, get_resource_liquid_volume, update_vessel_volume
+from .utils.logger_util import debug_print
 from .pump_protocol import generate_pump_protocol_with_rinsing
 
 logger = logging.getLogger(__name__)
 
-def debug_print(message):
-    """调试输出"""
-    logger.info(f"[RUN_COLUMN] {message}")
-
 def parse_percentage(pct_str: str) -> float:
     """
     解析百分比字符串为数值
-    
+
     Args:
         pct_str: 百分比字符串（如 "40 %", "40%", "40"）
-    
+
     Returns:
         float: 百分比数值（0-100）
     """
     if not pct_str or not pct_str.strip():
         return 0.0
-    
+
     pct_str = pct_str.strip().lower()
-    debug_print(f"🔍 解析百分比: '{pct_str}'")
-    
+
     # 移除百分号和空格
     pct_clean = re.sub(r'[%\s]', '', pct_str)
-    
-    # 提取数字
+
     match = re.search(r'([0-9]*\.?[0-9]+)', pct_clean)
     if match:
         value = float(match.group(1))
-        debug_print(f"✅ 百分比解析结果: {value}%")
         return value
-    
-    debug_print(f"⚠️ 无法解析百分比: '{pct_str}'，返回0.0")
+
+    debug_print(f"无法解析百分比: '{pct_str}'，返回0.0")
     return 0.0
 
 def parse_ratio(ratio_str: str) -> tuple:
     """
     解析比例字符串为两个数值
-    
+
     Args:
         ratio_str: 比例字符串（如 "5:95", "1:1", "40:60"）
-    
+
     Returns:
-        tuple: (ratio1, ratio2) 两个比例值
+        tuple: (ratio1, ratio2) 两个比例值（百分比）
     """
     if not ratio_str or not ratio_str.strip():
-        return (50.0, 50.0)  # 默认1:1
-    
+        return (50.0, 50.0)
+
     ratio_str = ratio_str.strip()
-    debug_print(f"🔍 解析比例: '{ratio_str}'")
-    
+
     # 支持多种分隔符：: / -
     if ':' in ratio_str:
         parts = ratio_str.split(':')
@@ -66,101 +60,82 @@ def parse_ratio(ratio_str: str) -> tuple:
     elif 'to' in ratio_str.lower():
         parts = ratio_str.lower().split('to')
     else:
-        debug_print(f"⚠️ 无法解析比例格式: '{ratio_str}'，使用默认1:1")
+        debug_print(f"无法解析比例格式: '{ratio_str}'，使用默认1:1")
         return (50.0, 50.0)
-    
+
     if len(parts) >= 2:
         try:
             ratio1 = float(parts[0].strip())
             ratio2 = float(parts[1].strip())
             total = ratio1 + ratio2
-            
-            # 转换为百分比
+
             pct1 = (ratio1 / total) * 100
             pct2 = (ratio2 / total) * 100
-            
-            debug_print(f"✅ 比例解析结果: {ratio1}:{ratio2} -> {pct1:.1f}%:{pct2:.1f}%")
+
             return (pct1, pct2)
         except ValueError as e:
-            debug_print(f"⚠️ 比例数值转换失败: {str(e)}")
-    
-    debug_print(f"⚠️ 比例解析失败，使用默认1:1")
+            debug_print(f"比例数值转换失败: {str(e)}")
+
+    debug_print(f"比例解析失败，使用默认1:1")
     return (50.0, 50.0)
 
 def parse_rf_value(rf_str: str) -> float:
     """
     解析Rf值字符串
-    
+
     Args:
         rf_str: Rf值字符串（如 "0.3", "0.45", "?"）
-    
+
     Returns:
         float: Rf值（0-1）
     """
     if not rf_str or not rf_str.strip():
-        return 0.3  # 默认Rf值
-    
+        return 0.3
+
     rf_str = rf_str.strip().lower()
-    debug_print(f"🔍 解析Rf值: '{rf_str}'")
-    
-    # 处理未知Rf值
+
     if rf_str in ['?', 'unknown', 'tbd', 'to be determined']:
-        default_rf = 0.3
-        debug_print(f"❓ 检测到未知Rf值，使用默认值: {default_rf}")
-        return default_rf
-    
-    # 提取数字
+        return 0.3
+
     match = re.search(r'([0-9]*\.?[0-9]+)', rf_str)
     if match:
         value = float(match.group(1))
-        # 确保Rf值在0-1范围内
         if value > 1.0:
-            value = value / 100.0  # 可能是百分比形式
-        value = max(0.0, min(1.0, value))  # 限制在0-1范围
-        debug_print(f"✅ Rf值解析结果: {value}")
+            value = value / 100.0
+        value = max(0.0, min(1.0, value))
         return value
-    
-    debug_print(f"⚠️ 无法解析Rf值: '{rf_str}'，使用默认值0.3")
+
     return 0.3
 
 def find_column_device(G: nx.DiGraph) -> str:
     """查找柱层析设备"""
-    debug_print("🔍 查找柱层析设备...")
-    
-    # 查找虚拟柱设备
     for node in G.nodes():
         node_data = G.nodes[node]
         node_class = node_data.get('class', '') or ''
-        
+
         if 'virtual_column' in node_class.lower() or 'column' in node_class.lower():
-            debug_print(f"🎉 找到柱层析设备: {node} ✨")
+            debug_print(f"找到柱层析设备: {node}")
             return node
-    
-    # 如果没有找到，尝试创建虚拟设备名称
+
     possible_names = ['column_1', 'virtual_column_1', 'chromatography_column_1']
     for name in possible_names:
         if name in G.nodes():
-            debug_print(f"🎉 找到柱设备: {name} ✨")
+            debug_print(f"找到柱设备: {name}")
             return name
-    
-    debug_print("⚠️ 未找到柱层析设备，将使用pump protocol直接转移")
+
+    debug_print("未找到柱层析设备，将使用pump protocol直接转移")
     return ""
 
 def find_column_vessel(G: nx.DiGraph, column: str) -> str:
     """查找柱容器"""
-    debug_print(f"🔍 查找柱容器: '{column}'")
-    
-    # 直接检查column参数是否是容器
     if column in G.nodes():
         node_type = G.nodes[column].get('type', '')
         if node_type == 'container':
-            debug_print(f"🎉 找到柱容器: {column} ✨")
             return column
-    
-    # 尝试常见的命名规则
+
     possible_names = [
         f"column_{column}",
-        f"{column}_column", 
+        f"{column}_column",
         f"vessel_{column}",
         f"{column}_vessel",
         "column_vessel",
@@ -169,211 +144,25 @@ def find_column_vessel(G: nx.DiGraph, column: str) -> str:
         "preparative_column",
         "column"
     ]
-    
+
     for vessel_name in possible_names:
         if vessel_name in G.nodes():
             node_type = G.nodes[vessel_name].get('type', '')
             if node_type == 'container':
-                debug_print(f"🎉 找到柱容器: {vessel_name} ✨")
                 return vessel_name
-    
-    debug_print(f"⚠️ 未找到柱容器，将直接在源容器中进行分离")
+
     return ""
 
-def find_solvent_vessel(G: nx.DiGraph, solvent: str) -> str:
-    """查找溶剂容器 - 增强版"""
-    if not solvent or not solvent.strip():
-        return ""
-    
-    solvent = solvent.strip().replace(' ', '_').lower()
-    debug_print(f"🔍 查找溶剂容器: '{solvent}'")
-    
-    # 🔧 方法1：直接搜索 data.reagent_name
-    for node in G.nodes():
-        node_data = G.nodes[node].get('data', {})
-        node_type = G.nodes[node].get('type', '')
-        
-        # 只搜索容器类型的节点
-        if node_type == 'container':
-            reagent_name = node_data.get('reagent_name', '').lower()
-            reagent_config = G.nodes[node].get('config', {}).get('reagent', '').lower()
-            
-            # 检查 data.reagent_name 和 config.reagent
-            if reagent_name == solvent or reagent_config == solvent:
-                debug_print(f"🎉 通过reagent_name找到溶剂容器: {node} (reagent: {reagent_name or reagent_config}) ✨")
-                return node
-            
-            # 模糊匹配 reagent_name
-            if solvent in reagent_name or reagent_name in solvent:
-                debug_print(f"🎉 通过reagent_name模糊匹配到溶剂容器: {node} (reagent: {reagent_name}) ✨")
-                return node
-            
-            if solvent in reagent_config or reagent_config in solvent:
-                debug_print(f"🎉 通过config.reagent模糊匹配到溶剂容器: {node} (reagent: {reagent_config}) ✨")
-                return node
-    
-    # 🔧 方法2：常见的溶剂容器命名规则
-    possible_names = [
-        f"flask_{solvent}",
-        f"bottle_{solvent}",
-        f"reagent_{solvent}",
-        f"{solvent}_bottle",
-        f"{solvent}_flask",
-        f"solvent_{solvent}",
-        f"reagent_bottle_{solvent}"
-    ]
-    
-    for vessel_name in possible_names:
-        if vessel_name in G.nodes():
-            node_type = G.nodes[vessel_name].get('type', '')
-            if node_type == 'container':
-                debug_print(f"🎉 通过命名规则找到溶剂容器: {vessel_name} ✨")
-                return vessel_name
-    
-    # 🔧 方法3：节点名称模糊匹配
-    for node in G.nodes():
-        node_type = G.nodes[node].get('type', '')
-        if node_type == 'container':
-            if ('flask_' in node or 'bottle_' in node or 'reagent_' in node) and solvent in node.lower():
-                debug_print(f"🎉 通过节点名称模糊匹配到溶剂容器: {node} ✨")
-                return node
-    
-    # 🔧 方法4：特殊溶剂名称映射
-    solvent_mapping = {
-        'dmf': ['dmf', 'dimethylformamide', 'n,n-dimethylformamide'],
-        'ethyl_acetate': ['ethyl_acetate', 'ethylacetate', 'etoac', 'ea'],
-        'hexane': ['hexane', 'hexanes', 'n-hexane'],
-        'methanol': ['methanol', 'meoh', 'ch3oh'],
-        'water': ['water', 'h2o', 'distilled_water'],
-        'acetone': ['acetone', 'ch3coch3', '2-propanone'],
-        'dichloromethane': ['dichloromethane', 'dcm', 'ch2cl2', 'methylene_chloride'],
-        'chloroform': ['chloroform', 'chcl3', 'trichloromethane']
-    }
-    
-    # 查找映射的同义词
-    for canonical_name, synonyms in solvent_mapping.items():
-        if solvent in synonyms:
-            debug_print(f"🔍 检测到溶剂同义词: '{solvent}' -> '{canonical_name}'")
-            return find_solvent_vessel(G, canonical_name)  # 递归搜索
-    
-    debug_print(f"⚠️ 未找到溶剂 '{solvent}' 的容器")
-    return ""
-
-def get_vessel_liquid_volume(vessel: dict) -> float:
-    """
-    获取容器中的液体体积 - 支持vessel字典
-    
-    Args:
-        vessel: 容器字典
-        
-    Returns:
-        float: 液体体积（mL）
-    """
-    if not vessel or "data" not in vessel:
-        debug_print(f"⚠️ 容器数据为空，返回 0.0mL")
-        return 0.0
-    
-    vessel_data = vessel["data"]
-    vessel_id = vessel.get("id", "unknown")
-    
-    debug_print(f"🔍 读取容器 '{vessel_id}' 体积数据: {vessel_data}")
-    
-    # 检查liquid_volume字段
-    if "liquid_volume" in vessel_data:
-        liquid_volume = vessel_data["liquid_volume"]
-        
-        # 处理列表格式
-        if isinstance(liquid_volume, list):
-            if len(liquid_volume) > 0:
-                volume = liquid_volume[0]
-                if isinstance(volume, (int, float)):
-                    debug_print(f"✅ 容器 '{vessel_id}' 体积: {volume}mL (列表格式)")
-                    return float(volume)
-        
-        # 处理直接数值格式
-        elif isinstance(liquid_volume, (int, float)):
-            debug_print(f"✅ 容器 '{vessel_id}' 体积: {liquid_volume}mL (数值格式)")
-            return float(liquid_volume)
-    
-    # 检查其他可能的体积字段
-    volume_keys = ['current_volume', 'total_volume', 'volume']
-    for key in volume_keys:
-        if key in vessel_data:
-            try:
-                volume = float(vessel_data[key])
-                if volume > 0:
-                    debug_print(f"✅ 容器 '{vessel_id}' 体积: {volume}mL (字段: {key})")
-                    return volume
-            except (ValueError, TypeError):
-                continue
-    
-    debug_print(f"⚠️ 无法获取容器 '{vessel_id}' 的体积，返回默认值 50.0mL")
-    return 50.0
-
-def update_vessel_volume(vessel: dict, G: nx.DiGraph, new_volume: float, description: str = "") -> None:
-    """
-    更新容器体积（同时更新vessel字典和图节点）
-    
-    Args:
-        vessel: 容器字典
-        G: 网络图
-        new_volume: 新体积
-        description: 更新描述
-    """
-    vessel_id = vessel.get("id", "unknown")
-    
-    if description:
-        debug_print(f"🔧 更新容器体积 - {description}")
-    
-    # 更新vessel字典中的体积
-    if "data" in vessel:
-        if "liquid_volume" in vessel["data"]:
-            current_volume = vessel["data"]["liquid_volume"]
-            if isinstance(current_volume, list):
-                if len(current_volume) > 0:
-                    vessel["data"]["liquid_volume"][0] = new_volume
-                else:
-                    vessel["data"]["liquid_volume"] = [new_volume]
-            else:
-                vessel["data"]["liquid_volume"] = new_volume
-        else:
-            vessel["data"]["liquid_volume"] = new_volume
-    else:
-        vessel["data"] = {"liquid_volume": new_volume}
-    
-    # 同时更新图中的容器数据
-    if vessel_id in G.nodes():
-        if 'data' not in G.nodes[vessel_id]:
-            G.nodes[vessel_id]['data'] = {}
-        
-        vessel_node_data = G.nodes[vessel_id]['data']
-        current_node_volume = vessel_node_data.get('liquid_volume', 0.0)
-        
-        if isinstance(current_node_volume, list):
-            if len(current_node_volume) > 0:
-                G.nodes[vessel_id]['data']['liquid_volume'][0] = new_volume
-            else:
-                G.nodes[vessel_id]['data']['liquid_volume'] = [new_volume]
-        else:
-            G.nodes[vessel_id]['data']['liquid_volume'] = new_volume
-    
-    debug_print(f"📊 容器 '{vessel_id}' 体积已更新为: {new_volume:.2f}mL")
-
 def calculate_solvent_volumes(total_volume: float, pct1: float, pct2: float) -> tuple:
     """根据百分比计算溶剂体积"""
     volume1 = (total_volume * pct1) / 100.0
     volume2 = (total_volume * pct2) / 100.0
-    
-    debug_print(f"🧮 溶剂体积计算: 总体积{total_volume}mL")
-    debug_print(f"  - 溶剂1: {pct1}% = {volume1}mL")
-    debug_print(f"  - 溶剂2: {pct2}% = {volume2}mL")
-    
     return (volume1, volume2)
 
 def generate_run_column_protocol(
     G: nx.DiGraph,
-    from_vessel: dict,  # 🔧 修改：从字符串改为字典类型
-    to_vessel: dict,    # 🔧 修改：从字符串改为字典类型
+    from_vessel: dict,
+    to_vessel: dict,
     column: str,
     rf: str = "",
     pct1: str = "",
@@ -385,7 +174,7 @@ def generate_run_column_protocol(
 ) -> List[Dict[str, Any]]:
     """
     生成柱层析分离的协议序列 - 支持vessel字典和体积运算
-    
+
     Args:
         G: 有向图，节点为设备和容器，边为流体管道
         from_vessel: 源容器字典（从XDL传入）
@@ -398,173 +187,112 @@ def generate_run_column_protocol(
         solvent2: 第二种溶剂名称（可选）
         ratio: 溶剂比例（如 "5:95"，可选，优先级高于pct1/pct2）
         **kwargs: 其他可选参数
-    
+
     Returns:
         List[Dict[str, Any]]: 柱层析分离操作的动作序列
     """
-    
-    # 🔧 核心修改：从字典中提取容器ID
+
     from_vessel_id, _ = get_vessel(from_vessel)
     to_vessel_id, _ = get_vessel(to_vessel)
 
-    debug_print("🏛️" * 20)
-    debug_print("🚀 开始生成柱层析协议（支持vessel字典和体积运算）✨")
-    debug_print(f"📝 输入参数:")
-    debug_print(f"  🥽 from_vessel: {from_vessel} (ID: {from_vessel_id})")
-    debug_print(f"  🥽 to_vessel: {to_vessel} (ID: {to_vessel_id})")
-    debug_print(f"  🏛️ column: '{column}'")
-    debug_print(f"  📊 rf: '{rf}'")
-    debug_print(f"  🧪 溶剂配比: pct1='{pct1}', pct2='{pct2}', ratio='{ratio}'")
-    debug_print(f"  🧪 溶剂名称: solvent1='{solvent1}', solvent2='{solvent2}'")
-    debug_print("🏛️" * 20)
-    
+    debug_print(f"开始生成柱层析协议: {from_vessel_id} -> {to_vessel_id}, column={column}")
+
     action_sequence = []
-    
-    # 🔧 新增：记录柱层析前的容器状态
-    debug_print("🔍 记录柱层析前容器状态...")
-    original_from_volume = get_vessel_liquid_volume(from_vessel)
-    original_to_volume = get_vessel_liquid_volume(to_vessel)
-    
-    debug_print(f"📊 柱层析前状态:")
-    debug_print(f"  - 源容器 {from_vessel_id}: {original_from_volume:.2f}mL")
-    debug_print(f"  - 目标容器 {to_vessel_id}: {original_to_volume:.2f}mL")
-    
+
+    # 记录柱层析前的容器状态
+    original_from_volume = get_resource_liquid_volume(from_vessel)
+    original_to_volume = get_resource_liquid_volume(to_vessel)
+
     # === 参数验证 ===
-    debug_print("📍 步骤1: 参数验证...")
-    
-    if not from_vessel_id:  # 🔧 使用 from_vessel_id
+    if not from_vessel_id:
         raise ValueError("from_vessel 参数不能为空")
-    if not to_vessel_id:    # 🔧 使用 to_vessel_id
+    if not to_vessel_id:
         raise ValueError("to_vessel 参数不能为空")
     if not column:
         raise ValueError("column 参数不能为空")
-    
-    if from_vessel_id not in G.nodes():  # 🔧 使用 from_vessel_id
+
+    if from_vessel_id not in G.nodes():
         raise ValueError(f"源容器 '{from_vessel_id}' 不存在于系统中")
-    if to_vessel_id not in G.nodes():    # 🔧 使用 to_vessel_id
+    if to_vessel_id not in G.nodes():
         raise ValueError(f"目标容器 '{to_vessel_id}' 不存在于系统中")
-    
-    debug_print("✅ 基本参数验证通过")
-    
+
     # === 参数解析 ===
-    debug_print("📍 步骤2: 参数解析...")
-    
-    # 解析Rf值
     final_rf = parse_rf_value(rf)
-    debug_print(f"🎯 最终Rf值: {final_rf}")
-    
-    # 解析溶剂比例（ratio优先级高于pct1/pct2）
+
     if ratio and ratio.strip():
         final_pct1, final_pct2 = parse_ratio(ratio)
-        debug_print(f"📊 使用ratio参数: {final_pct1:.1f}% : {final_pct2:.1f}%")
     else:
         final_pct1 = parse_percentage(pct1) if pct1 else 50.0
         final_pct2 = parse_percentage(pct2) if pct2 else 50.0
-        
-        # 如果百分比和不是100%，进行归一化
+
         total_pct = final_pct1 + final_pct2
         if total_pct == 0:
             final_pct1, final_pct2 = 50.0, 50.0
         elif total_pct != 100.0:
             final_pct1 = (final_pct1 / total_pct) * 100
             final_pct2 = (final_pct2 / total_pct) * 100
-        
-        debug_print(f"📊 使用百分比参数: {final_pct1:.1f}% : {final_pct2:.1f}%")
-    
-    # 设置默认溶剂（如果未指定）
+
     final_solvent1 = solvent1.strip() if solvent1 else "ethyl_acetate"
     final_solvent2 = solvent2.strip() if solvent2 else "hexane"
-    
-    debug_print(f"🧪 最终溶剂: {final_solvent1} : {final_solvent2}")
-    
+
+    debug_print(f"参数: rf={final_rf}, 溶剂={final_solvent1}:{final_solvent2} = {final_pct1:.1f}%:{final_pct2:.1f}%")
+
     # === 查找设备和容器 ===
-    debug_print("📍 步骤3: 查找设备和容器...")
-    
-    # 查找柱层析设备
     column_device_id = find_column_device(G)
-    
-    # 查找柱容器
     column_vessel = find_column_vessel(G, column)
-    
-    # 查找溶剂容器
     solvent1_vessel = find_solvent_vessel(G, final_solvent1)
     solvent2_vessel = find_solvent_vessel(G, final_solvent2)
-    
-    debug_print(f"🔧 设备映射:")
-    debug_print(f"  - 柱设备: '{column_device_id}'")
-    debug_print(f"  - 柱容器: '{column_vessel}'")
-    debug_print(f"  - 溶剂1容器: '{solvent1_vessel}'")
-    debug_print(f"  - 溶剂2容器: '{solvent2_vessel}'")
-    
+
     # === 获取源容器体积 ===
-    debug_print("📍 步骤4: 获取源容器体积...")
-    
     source_volume = original_from_volume
     if source_volume <= 0:
-        source_volume = 50.0  # 默认体积
-        debug_print(f"⚠️ 无法获取源容器体积，使用默认值: {source_volume}mL")
-    else:
-        debug_print(f"✅ 源容器体积: {source_volume}mL")
-    
+        source_volume = 50.0
+
     # === 计算溶剂体积 ===
-    debug_print("📍 步骤5: 计算溶剂体积...")
-    
-    # 洗脱溶剂通常是样品体积的2-5倍
     total_elution_volume = source_volume * 3.0
     solvent1_volume, solvent2_volume = calculate_solvent_volumes(
         total_elution_volume, final_pct1, final_pct2
     )
-    
+
     # === 执行柱层析流程 ===
-    debug_print("📍 步骤6: 执行柱层析流程...")
-    
-    # 🔧 新增：体积变化跟踪变量
     current_from_volume = source_volume
     current_to_volume = original_to_volume
     current_column_volume = 0.0
-    
+
     try:
-        # 步骤6.1: 样品上柱（如果有独立的柱容器）
-        if column_vessel and column_vessel != from_vessel_id:  # 🔧 使用 from_vessel_id
-            debug_print(f"📍 6.1: 样品上柱 - {source_volume}mL 从 {from_vessel_id} 到 {column_vessel}")
-            
+        # 步骤1: 样品上柱
+        if column_vessel and column_vessel != from_vessel_id:
             try:
                 sample_transfer_actions = generate_pump_protocol_with_rinsing(
                     G=G,
-                    from_vessel=from_vessel_id,  # 🔧 使用 from_vessel_id
+                    from_vessel=from_vessel_id,
                     to_vessel=column_vessel,
                     volume=source_volume,
-                    flowrate=1.0,  # 慢速上柱
+                    flowrate=1.0,
                     transfer_flowrate=0.5,
-                    rinsing_solvent="",  # 暂不冲洗
+                    rinsing_solvent="",
                     rinsing_volume=0.0,
                     rinsing_repeats=0
                 )
                 action_sequence.extend(sample_transfer_actions)
-                debug_print(f"✅ 样品上柱完成，添加了 {len(sample_transfer_actions)} 个动作")
-                
-                # 🔧 新增：更新体积 - 样品转移到柱上
-                current_from_volume = 0.0  # 源容器体积变为0
-                current_column_volume = source_volume  # 柱容器体积增加
-                
+
+                current_from_volume = 0.0
+                current_column_volume = source_volume
+
                 update_vessel_volume(from_vessel, G, current_from_volume, "样品上柱后，源容器清空")
-                
-                # 如果柱容器在图中，也更新其体积
+
                 if column_vessel in G.nodes():
                     if 'data' not in G.nodes[column_vessel]:
                         G.nodes[column_vessel]['data'] = {}
                     G.nodes[column_vessel]['data']['liquid_volume'] = current_column_volume
-                    debug_print(f"📊 柱容器 '{column_vessel}' 体积更新为: {current_column_volume:.2f}mL")
-                
+
             except Exception as e:
-                debug_print(f"⚠️ 样品上柱失败: {str(e)}")
-        
-        # 步骤6.2: 添加洗脱溶剂1（如果有溶剂容器）
+                debug_print(f"样品上柱失败: {str(e)}")
+
+        # 步骤2: 添加洗脱溶剂1
         if solvent1_vessel and solvent1_volume > 0:
-            debug_print(f"📍 6.2: 添加洗脱溶剂1 - {solvent1_volume:.1f}mL {final_solvent1}")
-            
             try:
-                target_vessel = column_vessel if column_vessel else from_vessel_id  # 🔧 使用 from_vessel_id
+                target_vessel = column_vessel if column_vessel else from_vessel_id
                 solvent1_transfer_actions = generate_pump_protocol_with_rinsing(
                     G=G,
                     from_vessel=solvent1_vessel,
@@ -574,27 +302,22 @@ def generate_run_column_protocol(
                     transfer_flowrate=1.0
                 )
                 action_sequence.extend(solvent1_transfer_actions)
-                debug_print(f"✅ 溶剂1添加完成，添加了 {len(solvent1_transfer_actions)} 个动作")
-                
-                # 🔧 新增：更新体积 - 添加溶剂1
+
                 if target_vessel == column_vessel:
                     current_column_volume += solvent1_volume
                     if column_vessel in G.nodes():
                         G.nodes[column_vessel]['data']['liquid_volume'] = current_column_volume
-                        debug_print(f"📊 柱容器体积增加: +{solvent1_volume:.2f}mL = {current_column_volume:.2f}mL")
                 elif target_vessel == from_vessel_id:
                     current_from_volume += solvent1_volume
                     update_vessel_volume(from_vessel, G, current_from_volume, "添加溶剂1后")
-                
+
             except Exception as e:
-                debug_print(f"⚠️ 溶剂1添加失败: {str(e)}")
-        
-        # 步骤6.3: 添加洗脱溶剂2（如果有溶剂容器）
+                debug_print(f"溶剂1添加失败: {str(e)}")
+
+        # 步骤3: 添加洗脱溶剂2
         if solvent2_vessel and solvent2_volume > 0:
-            debug_print(f"📍 6.3: 添加洗脱溶剂2 - {solvent2_volume:.1f}mL {final_solvent2}")
-            
             try:
-                target_vessel = column_vessel if column_vessel else from_vessel_id  # 🔧 使用 from_vessel_id
+                target_vessel = column_vessel if column_vessel else from_vessel_id
                 solvent2_transfer_actions = generate_pump_protocol_with_rinsing(
                     G=G,
                     from_vessel=solvent2_vessel,
@@ -604,31 +327,26 @@ def generate_run_column_protocol(
                     transfer_flowrate=1.0
                 )
                 action_sequence.extend(solvent2_transfer_actions)
-                debug_print(f"✅ 溶剂2添加完成，添加了 {len(solvent2_transfer_actions)} 个动作")
-                
-                # 🔧 新增：更新体积 - 添加溶剂2
+
                 if target_vessel == column_vessel:
                     current_column_volume += solvent2_volume
                     if column_vessel in G.nodes():
                         G.nodes[column_vessel]['data']['liquid_volume'] = current_column_volume
-                        debug_print(f"📊 柱容器体积增加: +{solvent2_volume:.2f}mL = {current_column_volume:.2f}mL")
                 elif target_vessel == from_vessel_id:
                     current_from_volume += solvent2_volume
                     update_vessel_volume(from_vessel, G, current_from_volume, "添加溶剂2后")
-                
+
             except Exception as e:
-                debug_print(f"⚠️ 溶剂2添加失败: {str(e)}")
-        
-        # 步骤6.4: 使用柱层析设备执行分离（如果有设备）
+                debug_print(f"溶剂2添加失败: {str(e)}")
+
+        # 步骤4: 使用柱层析设备执行分离
         if column_device_id:
-            debug_print(f"📍 6.4: 使用柱层析设备执行分离")
-            
             column_separation_action = {
                 "device_id": column_device_id,
                 "action_name": "run_column",
                 "action_kwargs": {
-                    "from_vessel": from_vessel_id,  # 🔧 使用 from_vessel_id
-                    "to_vessel": to_vessel_id,      # 🔧 使用 to_vessel_id
+                    "from_vessel": from_vessel_id,
+                    "to_vessel": to_vessel_id,
                     "column": column,
                     "rf": rf,
                     "pct1": pct1,
@@ -639,85 +357,65 @@ def generate_run_column_protocol(
                 }
             }
             action_sequence.append(column_separation_action)
-            debug_print(f"✅ 柱层析设备动作已添加")
-            
-            # 等待分离完成
-            separation_time = max(30, min(120, int(total_elution_volume / 2)))  # 30-120秒，基于体积
+
+            separation_time = max(30, min(120, int(total_elution_volume / 2)))
             action_sequence.append({
                 "action_name": "wait",
                 "action_kwargs": {"time": separation_time}
             })
-            debug_print(f"✅ 等待分离完成: {separation_time}秒")
-        
-        # 步骤6.5: 产物收集（从柱容器到目标容器）
-        if column_vessel and column_vessel != to_vessel_id:  # 🔧 使用 to_vessel_id
-            debug_print(f"📍 6.5: 产物收集 - 从 {column_vessel} 到 {to_vessel_id}")
-            
+
+        # 步骤5: 产物收集
+        if column_vessel and column_vessel != to_vessel_id:
             try:
-                # 估算产物体积（原始样品体积的70-90%，收率考虑）
                 product_volume = source_volume * 0.8
-                
+
                 product_transfer_actions = generate_pump_protocol_with_rinsing(
                     G=G,
                     from_vessel=column_vessel,
-                    to_vessel=to_vessel_id,  # 🔧 使用 to_vessel_id
+                    to_vessel=to_vessel_id,
                     volume=product_volume,
                     flowrate=1.5,
                     transfer_flowrate=0.8
                 )
                 action_sequence.extend(product_transfer_actions)
-                debug_print(f"✅ 产物收集完成，添加了 {len(product_transfer_actions)} 个动作")
-                
-                # 🔧 新增：更新体积 - 产物收集到目标容器
+
                 current_to_volume += product_volume
-                current_column_volume -= product_volume  # 柱容器体积减少
-                
+                current_column_volume -= product_volume
+
                 update_vessel_volume(to_vessel, G, current_to_volume, "产物收集后")
-                
-                # 更新柱容器体积
+
                 if column_vessel in G.nodes():
                     G.nodes[column_vessel]['data']['liquid_volume'] = max(0.0, current_column_volume)
-                    debug_print(f"📊 柱容器体积减少: -{product_volume:.2f}mL = {current_column_volume:.2f}mL")
-                
+
             except Exception as e:
-                debug_print(f"⚠️ 产物收集失败: {str(e)}")
-        
-        # 步骤6.6: 如果没有独立的柱设备和容器，执行简化的直接转移
+                debug_print(f"产物收集失败: {str(e)}")
+
+        # 步骤6: 简化模式 - 直接转移
         if not column_device_id and not column_vessel:
-            debug_print(f"📍 6.6: 简化模式 - 直接转移 {source_volume}mL 从 {from_vessel_id} 到 {to_vessel_id}")
-            
             try:
                 direct_transfer_actions = generate_pump_protocol_with_rinsing(
                     G=G,
-                    from_vessel=from_vessel_id,  # 🔧 使用 from_vessel_id
-                    to_vessel=to_vessel_id,      # 🔧 使用 to_vessel_id
+                    from_vessel=from_vessel_id,
+                    to_vessel=to_vessel_id,
                     volume=source_volume,
                     flowrate=2.0,
                     transfer_flowrate=1.0
                 )
                 action_sequence.extend(direct_transfer_actions)
-                debug_print(f"✅ 直接转移完成，添加了 {len(direct_transfer_actions)} 个动作")
-                
-                # 🔧 新增：更新体积 - 直接转移
-                current_from_volume = 0.0  # 源容器清空
-                current_to_volume += source_volume  # 目标容器增加
-                
+
+                current_from_volume = 0.0
+                current_to_volume += source_volume
+
                 update_vessel_volume(from_vessel, G, current_from_volume, "直接转移后，源容器清空")
                 update_vessel_volume(to_vessel, G, current_to_volume, "直接转移后，目标容器增加")
-                
+
             except Exception as e:
-                debug_print(f"⚠️ 直接转移失败: {str(e)}")
-        
+                debug_print(f"直接转移失败: {str(e)}")
+
     except Exception as e:
-        debug_print(f"❌ 协议生成失败: {str(e)} 😭")
-        
-        # 不添加不确定的动作，直接让action_sequence保持为空列表
-        # action_sequence 已经在函数开始时初始化为 []
-    
-    # 确保至少有一个有效的动作，如果完全失败就返回空列表
+        debug_print(f"协议生成失败: {str(e)}")
+
     if not action_sequence:
-        debug_print("⚠️ 没有生成任何有效动作")
-        # 可以选择返回空列表或添加一个基本的等待动作
         action_sequence.append({
             "action_name": "wait",
             "action_kwargs": {
@@ -725,83 +423,50 @@ def generate_run_column_protocol(
                 "description": "柱层析协议执行完成"
             }
         })
-    
-    # 🔧 新增：柱层析完成后的最终状态报告
-    final_from_volume = get_vessel_liquid_volume(from_vessel)
-    final_to_volume = get_vessel_liquid_volume(to_vessel)
-    
-    # 🎊 总结
-    debug_print("🏛️" * 20)
-    debug_print(f"🎉 柱层析协议生成完成! ✨")
-    debug_print(f"📊 总动作数: {len(action_sequence)} 个")
-    debug_print(f"🥽 路径: {from_vessel_id} → {to_vessel_id}")
-    debug_print(f"🏛️ 柱子: {column}")
-    debug_print(f"🧪 溶剂: {final_solvent1}:{final_solvent2} = {final_pct1:.1f}%:{final_pct2:.1f}%")
-    debug_print(f"📊 体积变化统计:")
-    debug_print(f"  源容器 {from_vessel_id}:")
-    debug_print(f"    - 柱层析前: {original_from_volume:.2f}mL")
-    debug_print(f"    - 柱层析后: {final_from_volume:.2f}mL")
-    debug_print(f"  目标容器 {to_vessel_id}:")
-    debug_print(f"    - 柱层析前: {original_to_volume:.2f}mL")
-    debug_print(f"    - 柱层析后: {final_to_volume:.2f}mL")
-    debug_print(f"    - 收集体积: {final_to_volume - original_to_volume:.2f}mL")
-    debug_print(f"⏱️ 预计总时间: {len(action_sequence) * 5:.0f} 秒 ⌛")
-    debug_print("🏛️" * 20)
-    
+
+    final_from_volume = get_resource_liquid_volume(from_vessel)
+    final_to_volume = get_resource_liquid_volume(to_vessel)
+
+    debug_print(f"柱层析协议生成完成: {len(action_sequence)} 个动作, {from_vessel_id} -> {to_vessel_id}, 收集={final_to_volume - original_to_volume:.2f}mL")
+
     return action_sequence
 
-# 🔧 新增：便捷函数
-def generate_ethyl_acetate_hexane_column_protocol(G: nx.DiGraph, from_vessel: dict, to_vessel: dict, 
+# 便捷函数
+def generate_ethyl_acetate_hexane_column_protocol(G: nx.DiGraph, from_vessel: dict, to_vessel: dict,
                                                  column: str, ratio: str = "30:70") -> List[Dict[str, Any]]:
     """乙酸乙酯-己烷柱层析（常用组合）"""
-    from_vessel_id = from_vessel["id"]
-    to_vessel_id = to_vessel["id"]
-    debug_print(f"🧪⛽ 乙酸乙酯-己烷柱层析: {from_vessel_id} → {to_vessel_id} @ {ratio}")
-    return generate_run_column_protocol(G, from_vessel, to_vessel, column, 
+    return generate_run_column_protocol(G, from_vessel, to_vessel, column,
                                       solvent1="ethyl_acetate", solvent2="hexane", ratio=ratio)
 
-def generate_methanol_dcm_column_protocol(G: nx.DiGraph, from_vessel: dict, to_vessel: dict, 
+def generate_methanol_dcm_column_protocol(G: nx.DiGraph, from_vessel: dict, to_vessel: dict,
                                         column: str, ratio: str = "5:95") -> List[Dict[str, Any]]:
     """甲醇-二氯甲烷柱层析"""
-    from_vessel_id = from_vessel["id"]
-    to_vessel_id = to_vessel["id"]
-    debug_print(f"🧪🧪 甲醇-DCM柱层析: {from_vessel_id} → {to_vessel_id} @ {ratio}")
-    return generate_run_column_protocol(G, from_vessel, to_vessel, column, 
+    return generate_run_column_protocol(G, from_vessel, to_vessel, column,
                                       solvent1="methanol", solvent2="dichloromethane", ratio=ratio)
 
-def generate_gradient_column_protocol(G: nx.DiGraph, from_vessel: dict, to_vessel: dict, 
-                                    column: str, start_ratio: str = "10:90", 
+def generate_gradient_column_protocol(G: nx.DiGraph, from_vessel: dict, to_vessel: dict,
+                                    column: str, start_ratio: str = "10:90",
                                     end_ratio: str = "50:50") -> List[Dict[str, Any]]:
     """梯度洗脱柱层析（中等比例）"""
-    from_vessel_id, _ = get_vessel(from_vessel)
-    to_vessel_id, _ = get_vessel(to_vessel)
-    debug_print(f"📈 梯度柱层析: {from_vessel_id} → {to_vessel_id} ({start_ratio} → {end_ratio})")
-    # 使用中间比例作为近似
     return generate_run_column_protocol(G, from_vessel, to_vessel, column, ratio="30:70")
 
-def generate_polar_column_protocol(G: nx.DiGraph, from_vessel: dict, to_vessel: dict, 
+def generate_polar_column_protocol(G: nx.DiGraph, from_vessel: dict, to_vessel: dict,
                                  column: str) -> List[Dict[str, Any]]:
     """极性化合物柱层析（高极性溶剂比例）"""
-    from_vessel_id, _ = get_vessel(from_vessel)
-    to_vessel_id, _ = get_vessel(to_vessel)
-    debug_print(f"⚡ 极性化合物柱层析: {from_vessel_id} → {to_vessel_id}")
-    return generate_run_column_protocol(G, from_vessel, to_vessel, column, 
+    return generate_run_column_protocol(G, from_vessel, to_vessel, column,
                                       solvent1="ethyl_acetate", solvent2="hexane", ratio="70:30")
 
-def generate_nonpolar_column_protocol(G: nx.DiGraph, from_vessel: dict, to_vessel: dict, 
+def generate_nonpolar_column_protocol(G: nx.DiGraph, from_vessel: dict, to_vessel: dict,
                                     column: str) -> List[Dict[str, Any]]:
     """非极性化合物柱层析（低极性溶剂比例）"""
-    from_vessel_id, _ = get_vessel(from_vessel)
-    to_vessel_id, _ = get_vessel(to_vessel)
-    debug_print(f"🛢️ 非极性化合物柱层析: {from_vessel_id} → {to_vessel_id}")
-    return generate_run_column_protocol(G, from_vessel, to_vessel, column, 
+    return generate_run_column_protocol(G, from_vessel, to_vessel, column,
                                       solvent1="ethyl_acetate", solvent2="hexane", ratio="5:95")
 
 # 测试函数
 def test_run_column_protocol():
     """测试柱层析协议"""
-    debug_print("🧪 === RUN COLUMN PROTOCOL 测试 === ✨")
-    debug_print("✅ 测试完成 🎉")
+    debug_print("=== RUN COLUMN PROTOCOL 测试 ===")
+    debug_print("测试完成")
 
 if __name__ == "__main__":
     test_run_column_protocol()

unilabos/compile/separate_protocol.py

@@ -1,41 +1,11 @@
-from functools import partial
-
 import networkx as nx
-import re
-import logging
-import sys
 from typing import List, Dict, Any, Union
-from .utils.vessel_parser import get_vessel
-from .utils.logger_util import action_log
+from .utils.vessel_parser import get_vessel, find_solvent_vessel, find_connected_stirrer
+from .utils.resource_helper import get_resource_liquid_volume, update_vessel_volume
+from .utils.logger_util import debug_print, action_log
+from .utils.unit_parser import parse_volume_input
 from .pump_protocol import generate_pump_protocol_with_rinsing
 
-logger = logging.getLogger(__name__)
-
-# 确保输出编码为UTF-8
-if hasattr(sys.stdout, 'reconfigure'):
-    try:
-        sys.stdout.reconfigure(encoding='utf-8')
-        sys.stderr.reconfigure(encoding='utf-8')
-    except:
-        pass
-
-def debug_print(message):
-    """调试输出函数 - 支持中文"""
-    try:
-        # 确保消息是字符串格式
-        safe_message = str(message)
-        logger.info(f"[SEPARATE] {safe_message}")
-    except UnicodeEncodeError:
-        # 如果编码失败，尝试替换不支持的字符
-        safe_message = str(message).encode('utf-8', errors='replace').decode('utf-8')
-        logger.info(f"[SEPARATE] {safe_message}")
-    except Exception as e:
-        # 最后的安全措施
-        fallback_message = f"日志输出错误: {repr(message)}"
-        logger.info(f"[SEPARATE] {fallback_message}")
-
-create_action_log = partial(action_log, prefix="[SEPARATE]")
-
 
 def generate_separate_protocol(
     G: nx.DiGraph,
@@ -93,45 +63,33 @@ def generate_separate_protocol(
     # 🔧 核心修改：从字典中提取容器ID
     vessel_id, vessel_data = get_vessel(vessel)
 
-    debug_print("🌀" * 20)
-    debug_print("🚀 开始生成分离协议（支持vessel字典和体积运算）✨")
-    debug_print(f"📝 输入参数:")
-    debug_print(f"  🥽 vessel: {vessel} (ID: {vessel_id})")
-    debug_print(f"  🎯 分离目的: '{purpose}'")
-    debug_print(f"  📊 产物相: '{product_phase}'")
-    debug_print(f"  💧 溶剂: '{solvent}'")
-    debug_print(f"  📏 体积: {volume} (类型: {type(volume)})")
-    debug_print(f"  🔄 重复次数: {repeats}")
-    debug_print(f"  🎯 产物容器: '{product_vessel}'")
-    debug_print(f"  🗑️ 废液容器: '{waste_vessel}'")
-    debug_print(f"  📦 其他参数: {kwargs}")
-    debug_print("🌀" * 20)
+    debug_print(f"开始生成分离协议: vessel={vessel_id}, purpose={purpose}, "
+                f"product_phase={product_phase}, solvent={solvent}, "
+                f"volume={volume}, repeats={repeats}")
 
     action_sequence = []
 
-    # 🔧 新增：记录分离前的容器状态
-    debug_print("🔍 记录分离前容器状态...")
-    original_liquid_volume = get_vessel_liquid_volume(vessel)
-    debug_print(f"📊 分离前液体体积: {original_liquid_volume:.2f}mL")
+    # 记录分离前的容器状态
+    original_liquid_volume = get_resource_liquid_volume(vessel)
+    debug_print(f"分离前液体体积: {original_liquid_volume:.2f}mL")
 
     # === 参数验证和标准化 ===
-    debug_print("🔍 步骤1: 参数验证和标准化...")
-    action_sequence.append(create_action_log(f"开始分离操作 - 容器: {vessel_id}", "🎬"))
-    action_sequence.append(create_action_log(f"分离目的: {purpose}", "🧪"))
-    action_sequence.append(create_action_log(f"产物相: {product_phase}", "📊"))
+    action_sequence.append(action_log(f"开始分离操作 - 容器: {vessel_id}", "🎬", prefix="[SEPARATE]"))
+    action_sequence.append(action_log(f"分离目的: {purpose}", "🧪", prefix="[SEPARATE]"))
+    action_sequence.append(action_log(f"产物相: {product_phase}", "📊", prefix="[SEPARATE]"))
 
     # 统一容器参数 - 支持字典和字符串
-    def extract_vessel_id(vessel_param):
-        if isinstance(vessel_param, dict):
-            return vessel_param.get("id", "")
-        elif isinstance(vessel_param, str):
-            return vessel_param
-        else:
-            return ""
+    final_vessel_id = vessel_id
 
-    final_vessel_id, _ = vessel_id
-    final_to_vessel_id, _ = get_vessel(to_vessel) or get_vessel(product_vessel)
-    final_waste_vessel_id, _ = get_vessel(waste_phase_to_vessel) or get_vessel(waste_vessel)
+    to_vessel_result = get_vessel(to_vessel) if to_vessel else None
+    if to_vessel_result is None or to_vessel_result[0] == "":
+        to_vessel_result = get_vessel(product_vessel) if product_vessel else None
+    final_to_vessel_id = to_vessel_result[0] if to_vessel_result else ""
+
+    waste_vessel_result = get_vessel(waste_phase_to_vessel) if waste_phase_to_vessel else None
+    if waste_vessel_result is None or waste_vessel_result[0] == "":
+        waste_vessel_result = get_vessel(waste_vessel) if waste_vessel else None
+    final_waste_vessel_id = waste_vessel_result[0] if waste_vessel_result else ""
 
     # 统一体积参数
     final_volume = parse_volume_input(volume or solvent_volume)
@@ -141,16 +99,12 @@ def generate_separate_protocol(
         repeats = 1
         debug_print(f"⚠️ 重复次数参数 <= 0，自动设置为 1")
 
-    debug_print(f"🔧 标准化后的参数:")
-    debug_print(f"  🥼 分离容器: '{final_vessel_id}'")
-    debug_print(f"  🎯 产物容器: '{final_to_vessel_id}'")
-    debug_print(f"  🗑️ 废液容器: '{final_waste_vessel_id}'")
-    debug_print(f"  📏 溶剂体积: {final_volume}mL")
-    debug_print(f"  🔄 重复次数: {repeats}")
+    debug_print(f"标准化参数: vessel={final_vessel_id}, to={final_to_vessel_id}, "
+                f"waste={final_waste_vessel_id}, volume={final_volume}mL, repeats={repeats}")
 
-    action_sequence.append(create_action_log(f"分离容器: {final_vessel_id}", "🧪"))
-    action_sequence.append(create_action_log(f"溶剂体积: {final_volume}mL", "📏"))
-    action_sequence.append(create_action_log(f"重复次数: {repeats}", "🔄"))
+    action_sequence.append(action_log(f"分离容器: {final_vessel_id}", "🧪", prefix="[SEPARATE]"))
+    action_sequence.append(action_log(f"溶剂体积: {final_volume}mL", "📏", prefix="[SEPARATE]"))
+    action_sequence.append(action_log(f"重复次数: {repeats}", "🔄", prefix="[SEPARATE]"))
 
     # 验证必需参数
     if not purpose:
@@ -160,72 +114,68 @@ def generate_separate_protocol(
     if purpose not in ["wash", "extract", "separate"]:
         debug_print(f"⚠️ 未知的分离目的 '{purpose}'，使用默认值 'separate'")
         purpose = "separate"
-        action_sequence.append(create_action_log(f"未知目的，使用: {purpose}", "⚠️"))
+        action_sequence.append(action_log(f"未知目的，使用: {purpose}", "⚠️", prefix="[SEPARATE]"))
     if product_phase not in ["top", "bottom"]:
         debug_print(f"⚠️ 未知的产物相 '{product_phase}'，使用默认值 'top'")
         product_phase = "top"
-        action_sequence.append(create_action_log(f"未知相别，使用: {product_phase}", "⚠️"))
+        action_sequence.append(action_log(f"未知相别，使用: {product_phase}", "⚠️", prefix="[SEPARATE]"))
 
-    debug_print("✅ 参数验证通过")
-    action_sequence.append(create_action_log("参数验证通过", "✅"))
+    action_sequence.append(action_log("参数验证通过", "✅", prefix="[SEPARATE]"))
 
     # === 查找设备 ===
-    debug_print("🔍 步骤2: 查找设备...")
-    action_sequence.append(create_action_log("正在查找相关设备...", "🔍"))
+    action_sequence.append(action_log("正在查找相关设备...", "🔍", prefix="[SEPARATE]"))
 
     # 查找分离器设备
-    separator_device = find_separator_device(G, final_vessel_id)  # 🔧 使用 final_vessel_id
+    separator_device = find_separator_device(G, final_vessel_id)
     if separator_device:
-        action_sequence.append(create_action_log(f"找到分离器设备: {separator_device}", "🧪"))
+        action_sequence.append(action_log(f"找到分离器设备: {separator_device}", "🧪", prefix="[SEPARATE]"))
     else:
         debug_print("⚠️ 未找到分离器设备，可能无法执行分离")
-        action_sequence.append(create_action_log("未找到分离器设备", "⚠️"))
+        action_sequence.append(action_log("未找到分离器设备", "⚠️", prefix="[SEPARATE]"))
 
     # 查找搅拌器
-    stirrer_device = find_connected_stirrer(G, final_vessel_id)  # 🔧 使用 final_vessel_id
+    stirrer_device = find_connected_stirrer(G, final_vessel_id)
     if stirrer_device:
-        action_sequence.append(create_action_log(f"找到搅拌器: {stirrer_device}", "🌪️"))
+        action_sequence.append(action_log(f"找到搅拌器: {stirrer_device}", "🌪️", prefix="[SEPARATE]"))
     else:
-        action_sequence.append(create_action_log("未找到搅拌器", "⚠️"))
+        action_sequence.append(action_log("未找到搅拌器", "⚠️", prefix="[SEPARATE]"))
 
     # 查找溶剂容器（如果需要）
     solvent_vessel = ""
     if solvent and solvent.strip():
-        solvent_vessel = find_solvent_vessel(G, solvent)
+        try:
+            solvent_vessel = find_solvent_vessel(G, solvent)
+        except ValueError:
+            solvent_vessel = ""
         if solvent_vessel:
-            action_sequence.append(create_action_log(f"找到溶剂容器: {solvent_vessel}", "💧"))
+            action_sequence.append(action_log(f"找到溶剂容器: {solvent_vessel}", "💧", prefix="[SEPARATE]"))
         else:
-            action_sequence.append(create_action_log(f"未找到溶剂容器: {solvent}", "⚠️"))
+            action_sequence.append(action_log(f"未找到溶剂容器: {solvent}", "⚠️", prefix="[SEPARATE]"))
 
-    debug_print(f"📊 设备配置:")
-    debug_print(f"  🧪 分离器设备: '{separator_device}'")
-    debug_print(f"  🌪️ 搅拌器设备: '{stirrer_device}'")
-    debug_print(f"  💧 溶剂容器: '{solvent_vessel}'")
+    debug_print(f"设备配置: separator={separator_device}, stirrer={stirrer_device}, solvent_vessel={solvent_vessel}")
 
     # === 执行分离流程 ===
-    debug_print("🔍 步骤3: 执行分离流程...")
-    action_sequence.append(create_action_log("开始分离工作流程", "🎯"))
+    action_sequence.append(action_log("开始分离工作流程", "🎯", prefix="[SEPARATE]"))
 
-    # 🔧 新增：体积变化跟踪变量
+    # 体积变化跟踪变量
     current_volume = original_liquid_volume
 
     try:
         for repeat_idx in range(repeats):
             cycle_num = repeat_idx + 1
-            debug_print(f"🔄 第{cycle_num}轮: 开始分离循环 {cycle_num}/{repeats}")
-            action_sequence.append(create_action_log(f"分离循环 {cycle_num}/{repeats} 开始", "🔄"))
+            debug_print(f"分离循环 {cycle_num}/{repeats} 开始")
+            action_sequence.append(action_log(f"分离循环 {cycle_num}/{repeats} 开始", "🔄", prefix="[SEPARATE]"))
 
             # 步骤3.1: 添加溶剂（如果需要）
             if solvent_vessel and final_volume > 0:
-                debug_print(f"🔄 第{cycle_num}轮 步骤1: 添加溶剂 {solvent} ({final_volume}mL)")
-                action_sequence.append(create_action_log(f"向分离容器添加 {final_volume}mL {solvent}", "💧"))
+                action_sequence.append(action_log(f"向分离容器添加 {final_volume}mL {solvent}", "💧", prefix="[SEPARATE]"))
 
                 try:
                     # 使用pump protocol添加溶剂
                     pump_actions = generate_pump_protocol_with_rinsing(
                         G=G,
                         from_vessel=solvent_vessel,
-                        to_vessel=final_vessel_id,  # 🔧 使用 final_vessel_id
+                        to_vessel=final_vessel_id,
                         volume=final_volume,
                         amount="",
                         time=0.0,
@@ -242,30 +192,27 @@ def generate_separate_protocol(
                         **kwargs
                     )
                     action_sequence.extend(pump_actions)
-                    debug_print(f"✅ 溶剂添加完成，添加了 {len(pump_actions)} 个动作")
-                    action_sequence.append(create_action_log(f"溶剂转移完成 ({len(pump_actions)} 个操作)", "✅"))
+                    action_sequence.append(action_log(f"溶剂转移完成 ({len(pump_actions)} 个操作)", "✅", prefix="[SEPARATE]"))
 
-                    # 🔧 新增：更新体积 - 添加溶剂后
+                    # 更新体积 - 添加溶剂后
                     current_volume += final_volume
                     update_vessel_volume(vessel, G, current_volume, f"添加{final_volume}mL {solvent}后")
 
                 except Exception as e:
                     debug_print(f"❌ 溶剂添加失败: {str(e)}")
-                    action_sequence.append(create_action_log(f"溶剂添加失败: {str(e)}", "❌"))
+                    action_sequence.append(action_log(f"溶剂添加失败: {str(e)}", "❌", prefix="[SEPARATE]"))
             else:
-                debug_print(f"🔄 第{cycle_num}轮 步骤1: 无需添加溶剂")
-                action_sequence.append(create_action_log("无需添加溶剂", "⏭️"))
+                action_sequence.append(action_log("无需添加溶剂", "⏭️", prefix="[SEPARATE]"))
 
             # 步骤3.2: 启动搅拌（如果有搅拌器）
             if stirrer_device and stir_time > 0:
-                debug_print(f"🔄 第{cycle_num}轮 步骤2: 开始搅拌 ({stir_speed}rpm，持续 {stir_time}s)")
-                action_sequence.append(create_action_log(f"开始搅拌: {stir_speed}rpm，持续 {stir_time}s", "🌪️"))
+                action_sequence.append(action_log(f"开始搅拌: {stir_speed}rpm，持续 {stir_time}s", "🌪️", prefix="[SEPARATE]"))
 
                 action_sequence.append({
                     "device_id": stirrer_device,
                     "action_name": "start_stir",
                     "action_kwargs": {
-                        "vessel": {"id": final_vessel_id},  # 🔧 使用 final_vessel_id
+                        "vessel": {"id": final_vessel_id},
                         "stir_speed": stir_speed,
                         "purpose": f"分离混合 - {purpose}"
                     }
@@ -273,43 +220,37 @@ def generate_separate_protocol(
 
                 # 搅拌等待
                 stir_minutes = stir_time / 60
-                action_sequence.append(create_action_log(f"搅拌中，持续 {stir_minutes:.1f} 分钟", "⏱️"))
+                action_sequence.append(action_log(f"搅拌中，持续 {stir_minutes:.1f} 分钟", "⏱️", prefix="[SEPARATE]"))
                 action_sequence.append({
                     "action_name": "wait",
                     "action_kwargs": {"time": stir_time}
                 })
 
                 # 停止搅拌
-                action_sequence.append(create_action_log("停止搅拌器", "🛑"))
+                action_sequence.append(action_log("停止搅拌器", "🛑", prefix="[SEPARATE]"))
                 action_sequence.append({
                     "device_id": stirrer_device,
                     "action_name": "stop_stir",
-                    "action_kwargs": {"vessel": final_vessel_id}  # 🔧 使用 final_vessel_id
+                    "action_kwargs": {"vessel": final_vessel_id}
                 })
 
             else:
-                debug_print(f"🔄 第{cycle_num}轮 步骤2: 无需搅拌")
-                action_sequence.append(create_action_log("无需搅拌", "⏭️"))
+                action_sequence.append(action_log("无需搅拌", "⏭️", prefix="[SEPARATE]"))
 
             # 步骤3.3: 静置分层
             if settling_time > 0:
-                debug_print(f"🔄 第{cycle_num}轮 步骤3: 静置分层 ({settling_time}s)")
                 settling_minutes = settling_time / 60
-                action_sequence.append(create_action_log(f"静置分层 ({settling_minutes:.1f} 分钟)", "⚖️"))
+                action_sequence.append(action_log(f"静置分层 ({settling_minutes:.1f} 分钟)", "⚖️", prefix="[SEPARATE]"))
                 action_sequence.append({
                     "action_name": "wait",
                     "action_kwargs": {"time": settling_time}
                 })
             else:
-                debug_print(f"🔄 第{cycle_num}轮 步骤3: 未指定静置时间")
-                action_sequence.append(create_action_log("未指定静置时间", "⏭️"))
+                action_sequence.append(action_log("未指定静置时间", "⏭️", prefix="[SEPARATE]"))
 
             # 步骤3.4: 执行分离操作
             if separator_device:
-                debug_print(f"🔄 第{cycle_num}轮 步骤4: 执行分离操作")
-                action_sequence.append(create_action_log(f"执行分离: 收集{product_phase}相", "🧪"))
-
-                # 🔧 替换为具体的分离操作逻辑（基于old版本）
+                action_sequence.append(action_log(f"执行分离: 收集{product_phase}相", "🧪", prefix="[SEPARATE]"))
 
                 # 首先进行分液判断（电导突跃）
                 action_sequence.append({
@@ -324,11 +265,10 @@ def generate_separate_protocol(
                 phase_volume = current_volume / 2
 
                 # 智能查找分离容器底部
-                separation_vessel_bottom = find_separation_vessel_bottom(G, final_vessel_id)  # ✅
+                separation_vessel_bottom = find_separation_vessel_bottom(G, final_vessel_id)
 
                 if product_phase == "bottom":
-                    debug_print(f"🔄 收集底相产物到 {final_to_vessel_id}")
-                    action_sequence.append(create_action_log("收集底相产物", "📦"))
+                    action_sequence.append(action_log("收集底相产物", "📦", prefix="[SEPARATE]"))
 
                     # 产物转移到目标瓶
                     if final_to_vessel_id:
@@ -364,8 +304,7 @@ def generate_separate_protocol(
                         action_sequence.extend(pump_actions)
 
                 elif product_phase == "top":
-                    debug_print(f"🔄 收集上相产物到 {final_to_vessel_id}")
-                    action_sequence.append(create_action_log("收集上相产物", "📦"))
+                    action_sequence.append(action_log("收集上相产物", "📦", prefix="[SEPARATE]"))
 
                     # 弃去下面那一相进废液
                     if final_waste_vessel_id:
@@ -400,10 +339,9 @@ def generate_separate_protocol(
                         )
                         action_sequence.extend(pump_actions)
 
-                debug_print(f"✅ 分离操作已完成")
-                action_sequence.append(create_action_log("分离操作完成", "✅"))
+                action_sequence.append(action_log("分离操作完成", "✅", prefix="[SEPARATE]"))
 
-                # 🔧 新增：分离后体积估算
+                # 分离后体积估算
                 separated_volume = phase_volume * 0.95  # 假设5%损失，只保留产物相体积
                 update_vessel_volume(vessel, G, separated_volume, f"分离操作后（第{cycle_num}轮）")
                 current_volume = separated_volume
@@ -411,23 +349,21 @@ def generate_separate_protocol(
                 # 收集结果
                 if final_to_vessel_id:
                     action_sequence.append(
-                        create_action_log(f"产物 ({product_phase}相) 收集到: {final_to_vessel_id}", "📦"))
+                        action_log(f"产物 ({product_phase}相) 收集到: {final_to_vessel_id}", "📦", prefix="[SEPARATE]"))
                 if final_waste_vessel_id:
-                    action_sequence.append(create_action_log(f"废相收集到: {final_waste_vessel_id}", "🗑️"))
+                    action_sequence.append(action_log(f"废相收集到: {final_waste_vessel_id}", "🗑️", prefix="[SEPARATE]"))
 
             else:
-                debug_print(f"🔄 第{cycle_num}轮 步骤4: 无分离器设备，跳过分离")
-                action_sequence.append(create_action_log("无分离器设备可用", "❌"))
+                action_sequence.append(action_log("无分离器设备可用", "❌", prefix="[SEPARATE]"))
                 # 添加等待时间模拟分离
                 action_sequence.append({
                     "action_name": "wait",
                     "action_kwargs": {"time": 10.0}
                 })
 
-            # 🔧 新增：如果不是最后一次，从中转瓶转移回分液漏斗（基于old版本逻辑）
+            # 如果不是最后一次，从中转瓶转移回分液漏斗
             if repeat_idx < repeats - 1 and final_to_vessel_id and final_to_vessel_id != final_vessel_id:
-                debug_print(f"🔄 第{cycle_num}轮: 产物转移回分离容器准备下一轮")
-                action_sequence.append(create_action_log("产物转回分离容器，准备下一轮", "🔄"))
+                action_sequence.append(action_log("产物转回分离容器，准备下一轮", "🔄", prefix="[SEPARATE]"))
 
                 pump_actions = generate_pump_protocol_with_rinsing(
                     G=G,
@@ -444,368 +380,85 @@ def generate_separate_protocol(
 
             # 循环间等待（除了最后一次）
             if repeat_idx < repeats - 1:
-                debug_print(f"🔄 第{cycle_num}轮: 等待下一次循环...")
-                action_sequence.append(create_action_log("等待下一次循环...", "⏳"))
+                action_sequence.append(action_log("等待下一次循环...", "⏳", prefix="[SEPARATE]"))
                 action_sequence.append({
                     "action_name": "wait",
                     "action_kwargs": {"time": 5}
                 })
             else:
-                action_sequence.append(create_action_log(f"分离循环 {cycle_num}/{repeats} 完成", "🌟"))
+                action_sequence.append(action_log(f"分离循环 {cycle_num}/{repeats} 完成", "🌟", prefix="[SEPARATE]"))
 
     except Exception as e:
         debug_print(f"❌ 分离工作流程执行失败: {str(e)}")
-        action_sequence.append(create_action_log(f"分离工作流程失败: {str(e)}", "❌"))
+        action_sequence.append(action_log(f"分离工作流程失败: {str(e)}", "❌", prefix="[SEPARATE]"))
 
-    # 🔧 新增：分离完成后的最终状态报告
-    final_liquid_volume = get_vessel_liquid_volume(vessel)
+    # 分离完成后的最终状态报告
+    final_liquid_volume = get_resource_liquid_volume(vessel)
 
     # === 最终结果 ===
     total_time = (stir_time + settling_time + 15) * repeats  # 估算总时间
 
-    debug_print("🌀" * 20)
-    debug_print(f"🎉 分离协议生成完成")
-    debug_print(f"📊 协议统计:")
-    debug_print(f"  📋 总动作数: {len(action_sequence)}")
-    debug_print(f"  ⏱️ 预计总时间: {total_time:.0f}s ({total_time / 60:.1f} 分钟)")
-    debug_print(f"  🥼 分离容器: {final_vessel_id}")
-    debug_print(f"  🎯 分离目的: {purpose}")
-    debug_print(f"  📊 产物相: {product_phase}")
-    debug_print(f"  🔄 重复次数: {repeats}")
-    debug_print(f"💧 体积变化统计:")
-    debug_print(f"  - 分离前体积: {original_liquid_volume:.2f}mL")
-    debug_print(f"  - 分离后体积: {final_liquid_volume:.2f}mL")
-    if solvent:
-        debug_print(f"  💧 溶剂: {solvent} ({final_volume}mL × {repeats}轮 = {final_volume * repeats:.2f}mL)")
-    if final_to_vessel_id:
-        debug_print(f"  🎯 产物容器: {final_to_vessel_id}")
-    if final_waste_vessel_id:
-        debug_print(f"  🗑️ 废液容器: {final_waste_vessel_id}")
-    debug_print("🌀" * 20)
+    debug_print(f"分离协议生成完成: {len(action_sequence)} 个动作, "
+                f"预计 {total_time:.0f}s, 体积 {original_liquid_volume:.2f}→{final_liquid_volume:.2f}mL")
 
     # 添加完成日志
     summary_msg = f"分离协议完成: {final_vessel_id} ({purpose}，{repeats} 次循环)"
     if solvent:
         summary_msg += f"，使用 {final_volume * repeats:.2f}mL {solvent}"
-    action_sequence.append(create_action_log(summary_msg, "🎉"))
+    action_sequence.append(action_log(summary_msg, "🎉", prefix="[SEPARATE]"))
 
     return action_sequence
 
-def parse_volume_input(volume_input: Union[str, float]) -> float:
-    """
-    解析体积输入，支持带单位的字符串
-    
-    Args:
-        volume_input: 体积输入（如 "200 mL", "?", 50.0）
-    
-    Returns:
-        float: 体积（毫升）
-    """
-    if isinstance(volume_input, (int, float)):
-        debug_print(f"📏 体积输入为数值: {volume_input}")
-        return float(volume_input)
-    
-    if not volume_input or not str(volume_input).strip():
-        debug_print(f"⚠️ 体积输入为空，返回 0.0mL")
-        return 0.0
-    
-    volume_str = str(volume_input).lower().strip()
-    debug_print(f"🔍 解析体积输入: '{volume_str}'")
-    
-    # 处理未知体积
-    if volume_str in ['?', 'unknown', 'tbd', 'to be determined', '未知', '待定']:
-        default_volume = 100.0  # 默认100mL
-        debug_print(f"❓ 检测到未知体积，使用默认值: {default_volume}mL")
-        return default_volume
-    
-    # 移除空格并提取数字和单位
-    volume_clean = re.sub(r'\s+', '', volume_str)
-    
-    # 匹配数字和单位的正则表达式
-    match = re.match(r'([0-9]*\.?[0-9]+)\s*(ml|l|μl|ul|microliter|milliliter|liter|毫升|升|微升)?', volume_clean)
-    
-    if not match:
-        debug_print(f"⚠️ 无法解析体积: '{volume_str}'，使用默认值 100mL")
-        return 100.0
-    
-    value = float(match.group(1))
-    unit = match.group(2) or 'ml'  # 默认单位为毫升
-    
-    # 转换为毫升
-    if unit in ['l', 'liter', '升']:
-        volume = value * 1000.0  # L -> mL
-        debug_print(f"🔄 体积转换: {value}L -> {volume}mL")
-    elif unit in ['μl', 'ul', 'microliter', '微升']:
-        volume = value / 1000.0  # μL -> mL
-        debug_print(f"🔄 体积转换: {value}μL -> {volume}mL")
-    else:  # ml, milliliter, 毫升 或默认
-        volume = value  # 已经是mL
-        debug_print(f"✅ 体积已为毫升单位: {volume}mL")
-    
-    return volume
-
-def find_solvent_vessel(G: nx.DiGraph, solvent: str) -> str:
-    """查找溶剂容器，支持多种匹配模式"""
-    if not solvent or not solvent.strip():
-        debug_print("⏭️ 未指定溶剂，跳过溶剂容器查找")
-        return ""
-    
-    debug_print(f"🔍 正在查找溶剂 '{solvent}' 的容器...")
-    
-    # 🔧 方法1：直接搜索 data.reagent_name 和 config.reagent
-    debug_print(f"📋 方法1: 搜索试剂字段...")
-    for node in G.nodes():
-        node_data = G.nodes[node].get('data', {})
-        node_type = G.nodes[node].get('type', '')
-        config_data = G.nodes[node].get('config', {})
-        
-        # 只搜索容器类型的节点
-        if node_type == 'container':
-            reagent_name = node_data.get('reagent_name', '').lower()
-            config_reagent = config_data.get('reagent', '').lower()
-            
-            # 精确匹配
-            if reagent_name == solvent.lower() or config_reagent == solvent.lower():
-                debug_print(f"✅ 通过试剂字段精确匹配找到容器: {node}")
-                return node
-            
-            # 模糊匹配
-            if (solvent.lower() in reagent_name and reagent_name) or \
-               (solvent.lower() in config_reagent and config_reagent):
-                debug_print(f"✅ 通过试剂字段模糊匹配找到容器: {node}")
-                return node
-    
-    # 🔧 方法2：常见的容器命名规则
-    debug_print(f"📋 方法2: 使用命名规则...")
-    solvent_clean = solvent.lower().replace(' ', '_').replace('-', '_')
-    possible_names = [
-        f"flask_{solvent_clean}",
-        f"bottle_{solvent_clean}",
-        f"vessel_{solvent_clean}",
-        f"{solvent_clean}_flask",
-        f"{solvent_clean}_bottle",
-        f"solvent_{solvent_clean}",
-        f"reagent_{solvent_clean}",
-        f"reagent_bottle_{solvent_clean}",
-        f"reagent_bottle_1",  # 通用试剂瓶
-        f"reagent_bottle_2",
-        f"reagent_bottle_3"
-    ]
-    
-    debug_print(f"🎯 尝试的容器名称: {possible_names[:5]}... (共 {len(possible_names)} 个)")
-    
-    for name in possible_names:
-        if name in G.nodes():
-            node_type = G.nodes[name].get('type', '')
-            if node_type == 'container':
-                debug_print(f"✅ 通过命名规则找到容器: {name}")
-                return name
-    
-    # 🔧 方法3：使用第一个试剂瓶作为备选
-    debug_print(f"📋 方法3: 查找备用试剂瓶...")
-    for node_id in G.nodes():
-        node_data = G.nodes[node_id]
-        if (node_data.get('type') == 'container' and 
-            ('reagent' in node_id.lower() or 'bottle' in node_id.lower())):
-            debug_print(f"⚠️ 未找到专用容器，使用备用容器: {node_id}")
-            return node_id
-    
-    debug_print(f"❌ 无法找到溶剂 '{solvent}' 的容器")
-    return ""
 
 def find_separator_device(G: nx.DiGraph, vessel: str) -> str:
     """查找分离器设备，支持多种查找方式"""
-    debug_print(f"🔍 正在查找容器 '{vessel}' 的分离器设备...")
-    
     # 方法1：查找连接到容器的分离器设备
-    debug_print(f"📋 方法1: 检查连接的分离器...")
     separator_nodes = []
     for node in G.nodes():
         node_class = G.nodes[node].get('class', '').lower()
         if 'separator' in node_class:
             separator_nodes.append(node)
-            debug_print(f"📋 发现分离器设备: {node}")
-            
             # 检查是否连接到目标容器
             if G.has_edge(node, vessel) or G.has_edge(vessel, node):
-                debug_print(f"✅ 找到连接的分离器: {node}")
                 return node
-    
-    debug_print(f"📊 找到的分离器总数: {len(separator_nodes)}")
-    
+
     # 方法2：根据命名规则查找
-    debug_print(f"📋 方法2: 使用命名规则...")
     possible_names = [
         f"{vessel}_controller",
         f"{vessel}_separator",
         vessel,  # 容器本身可能就是分离器
         "separator_1",
         "virtual_separator",
-        "liquid_handler_1",  # 液体处理器也可能用于分离
+        "liquid_handler_1",
         "controller_1"
     ]
-    
-    debug_print(f"🎯 尝试的分离器名称: {possible_names}")
-    
+
     for name in possible_names:
         if name in G.nodes():
             node_class = G.nodes[name].get('class', '').lower()
             if 'separator' in node_class or 'controller' in node_class:
-                debug_print(f"✅ 通过命名规则找到分离器: {name}")
                 return name
-    
-    # 方法3：查找第一个分离器设备
-    debug_print(f"📋 方法3: 使用第一个可用分离器...")
+
+    # 方法3：使用第一个可用分离器
     if separator_nodes:
         debug_print(f"⚠️ 使用第一个分离器设备: {separator_nodes[0]}")
         return separator_nodes[0]
-    
+
     debug_print(f"❌ 未找到分离器设备")
     return ""
 
-def find_connected_stirrer(G: nx.DiGraph, vessel: str) -> str:
-    """查找连接到指定容器的搅拌器"""
-    debug_print(f"🔍 正在查找与容器 {vessel} 连接的搅拌器...")
-    
-    stirrer_nodes = []
-    for node in G.nodes():
-        node_data = G.nodes[node]
-        node_class = node_data.get('class', '') or ''
-        
-        if 'stirrer' in node_class.lower():
-            stirrer_nodes.append(node)
-            debug_print(f"📋 发现搅拌器: {node}")
-    
-    debug_print(f"📊 找到的搅拌器总数: {len(stirrer_nodes)}")
-    
-    # 检查哪个搅拌器与目标容器相连
-    for stirrer in stirrer_nodes:
-        if G.has_edge(stirrer, vessel) or G.has_edge(vessel, stirrer):
-            debug_print(f"✅ 找到连接的搅拌器: {stirrer}")
-            return stirrer
-    
-    # 如果没有连接的搅拌器，返回第一个可用的
-    if stirrer_nodes:
-        debug_print(f"⚠️ 未找到直接连接的搅拌器，使用第一个可用的: {stirrer_nodes[0]}")
-        return stirrer_nodes[0]
-    
-    debug_print("❌ 未找到搅拌器")
-    return ""
-
-def get_vessel_liquid_volume(vessel: dict) -> float:
-    """
-    获取容器中的液体体积 - 支持vessel字典
-    
-    Args:
-        vessel: 容器字典
-        
-    Returns:
-        float: 液体体积（mL）
-    """
-    if not vessel or "data" not in vessel:
-        debug_print(f"⚠️ 容器数据为空，返回 0.0mL")
-        return 0.0
-    
-    vessel_data = vessel["data"]
-    vessel_id = vessel.get("id", "unknown")
-    
-    debug_print(f"🔍 读取容器 '{vessel_id}' 体积数据: {vessel_data}")
-    
-    # 检查liquid_volume字段
-    if "liquid_volume" in vessel_data:
-        liquid_volume = vessel_data["liquid_volume"]
-        
-        # 处理列表格式
-        if isinstance(liquid_volume, list):
-            if len(liquid_volume) > 0:
-                volume = liquid_volume[0]
-                if isinstance(volume, (int, float)):
-                    debug_print(f"✅ 容器 '{vessel_id}' 体积: {volume}mL (列表格式)")
-                    return float(volume)
-        
-        # 处理直接数值格式
-        elif isinstance(liquid_volume, (int, float)):
-            debug_print(f"✅ 容器 '{vessel_id}' 体积: {liquid_volume}mL (数值格式)")
-            return float(liquid_volume)
-    
-    # 检查其他可能的体积字段
-    volume_keys = ['current_volume', 'total_volume', 'volume']
-    for key in volume_keys:
-        if key in vessel_data:
-            try:
-                volume = float(vessel_data[key])
-                if volume > 0:
-                    debug_print(f"✅ 容器 '{vessel_id}' 体积: {volume}mL (字段: {key})")
-                    return volume
-            except (ValueError, TypeError):
-                continue
-    
-    debug_print(f"⚠️ 无法获取容器 '{vessel_id}' 的体积，返回默认值 50.0mL")
-    return 50.0
-
-def update_vessel_volume(vessel: dict, G: nx.DiGraph, new_volume: float, description: str = "") -> None:
-    """
-    更新容器体积（同时更新vessel字典和图节点）
-    
-    Args:
-        vessel: 容器字典
-        G: 网络图
-        new_volume: 新体积
-        description: 更新描述
-    """
-    vessel_id = vessel.get("id", "unknown")
-    
-    if description:
-        debug_print(f"🔧 更新容器体积 - {description}")
-    
-    # 更新vessel字典中的体积
-    if "data" in vessel:
-        if "liquid_volume" in vessel["data"]:
-            current_volume = vessel["data"]["liquid_volume"]
-            if isinstance(current_volume, list):
-                if len(current_volume) > 0:
-                    vessel["data"]["liquid_volume"][0] = new_volume
-                else:
-                    vessel["data"]["liquid_volume"] = [new_volume]
-            else:
-                vessel["data"]["liquid_volume"] = new_volume
-        else:
-            vessel["data"]["liquid_volume"] = new_volume
-    else:
-        vessel["data"] = {"liquid_volume": new_volume}
-    
-    # 同时更新图中的容器数据
-    if vessel_id in G.nodes():
-        if 'data' not in G.nodes[vessel_id]:
-            G.nodes[vessel_id]['data'] = {}
-        
-        vessel_node_data = G.nodes[vessel_id]['data']
-        current_node_volume = vessel_node_data.get('liquid_volume', 0.0)
-        
-        if isinstance(current_node_volume, list):
-            if len(current_node_volume) > 0:
-                G.nodes[vessel_id]['data']['liquid_volume'][0] = new_volume
-            else:
-                G.nodes[vessel_id]['data']['liquid_volume'] = [new_volume]
-        else:
-            G.nodes[vessel_id]['data']['liquid_volume'] = new_volume
-    
-    debug_print(f"📊 容器 '{vessel_id}' 体积已更新为: {new_volume:.2f}mL")
-
 
 def find_separation_vessel_bottom(G: nx.DiGraph, vessel_id: str) -> str:
     """
     智能查找分离容器的底部容器（假设为flask或vessel类型）
-    
+
     Args:
         G: 网络图
         vessel_id: 分离容器ID
-        
+
     Returns:
         str: 底部容器ID
     """
-    debug_print(f"🔍 查找分离容器 {vessel_id} 的底部容器...")
-    
     # 方法1：根据命名规则推测
     possible_bottoms = [
         f"{vessel_id}_bottom",
@@ -814,32 +467,25 @@ def find_separation_vessel_bottom(G: nx.DiGraph, vessel_id: str) -> str:
         f"{vessel_id}_flask",
         f"{vessel_id}_vessel"
     ]
-    
-    debug_print(f"📋 尝试的底部容器名称: {possible_bottoms}")
-    
+
     for bottom_id in possible_bottoms:
         if bottom_id in G.nodes():
             node_type = G.nodes[bottom_id].get('type', '')
             if node_type == 'container':
-                debug_print(f"✅ 通过命名规则找到底部容器: {bottom_id}")
                 return bottom_id
-    
-    # 方法2：查找与分离器相连的容器（假设底部容器会与分离器相连）
-    debug_print(f"📋 方法2: 查找连接的容器...")
+
+    # 方法2：查找与分离器相连的容器
     for node in G.nodes():
         node_data = G.nodes[node]
         node_class = node_data.get('class', '') or ''
-        
+
         if 'separator' in node_class.lower():
-            # 检查分离器的输入端
             if G.has_edge(node, vessel_id):
                 for neighbor in G.neighbors(node):
                     if neighbor != vessel_id:
                         neighbor_type = G.nodes[neighbor].get('type', '')
                         if neighbor_type == 'container':
-                            debug_print(f"✅ 通过连接找到底部容器: {neighbor}")
                             return neighbor
-    
+
     debug_print(f"❌ 无法找到分离容器 {vessel_id} 的底部容器")
     return ""
-

unilabos/compile/stir_protocol.py

@@ -1,116 +1,40 @@
 from typing import List, Dict, Any, Union
 import networkx as nx
 import logging
-import re
 
 from .utils.unit_parser import parse_time_input
+from .utils.resource_helper import get_resource_id, get_resource_display_info
+from .utils.logger_util import debug_print
+from .utils.vessel_parser import find_connected_stirrer
 
 logger = logging.getLogger(__name__)
 
-def debug_print(message):
-    """调试输出"""
-    logger.info(f"[STIR] {message}")
-
-
-def find_connected_stirrer(G: nx.DiGraph, vessel: str = None) -> str:
-    """查找与指定容器相连的搅拌设备"""
-    debug_print(f"🔍 查找搅拌设备，目标容器: {vessel} 🥽")
-    
-    # 🔧 查找所有搅拌设备
-    stirrer_nodes = []
-    for node in G.nodes():
-        node_data = G.nodes[node]
-        node_class = node_data.get('class', '') or ''
-        
-        if 'stirrer' in node_class.lower() or 'virtual_stirrer' in node_class:
-            stirrer_nodes.append(node)
-            debug_print(f"🎉 找到搅拌设备: {node} 🌪️")
-    
-    # 🔗 检查连接
-    if vessel and stirrer_nodes:
-        for stirrer in stirrer_nodes:
-            if G.has_edge(stirrer, vessel) or G.has_edge(vessel, stirrer):
-                debug_print(f"✅ 搅拌设备 '{stirrer}' 与容器 '{vessel}' 相连 🔗")
-                return stirrer
-    
-    # 🎯 使用第一个可用设备
-    if stirrer_nodes:
-        selected = stirrer_nodes[0]
-        debug_print(f"🔧 使用第一个搅拌设备: {selected} 🌪️")
-        return selected
-    
-    # 🆘 默认设备
-    debug_print("⚠️ 未找到搅拌设备，使用默认设备 🌪️")
-    return "stirrer_1"
-
 def validate_and_fix_params(stir_time: float, stir_speed: float, settling_time: float) -> tuple:
     """验证和修正参数"""
-    # ⏰ 搅拌时间验证
     if stir_time < 0:
-        debug_print(f"⚠️ 搅拌时间 {stir_time}s 无效，修正为 100s 🕐")
+        debug_print(f"搅拌时间 {stir_time}s 无效，修正为 100s")
         stir_time = 100.0
     elif stir_time > 100:  # 限制为100s
-        debug_print(f"⚠️ 搅拌时间 {stir_time}s 过长，仿真运行时，修正为 100s 🕐")
+        debug_print(f"搅拌时间 {stir_time}s 过长，仿真运行时修正为 100s")
         stir_time = 100.0
-    else:
-        debug_print(f"✅ 搅拌时间 {stir_time}s ({stir_time/60:.1f}分钟) 有效 ⏰")
-    
-    # 🌪️ 搅拌速度验证
+
     if stir_speed < 10.0 or stir_speed > 1500.0:
-        debug_print(f"⚠️ 搅拌速度 {stir_speed} RPM 超出范围，修正为 300 RPM 🌪️")
+        debug_print(f"搅拌速度 {stir_speed} RPM 超出范围，修正为 300 RPM")
         stir_speed = 300.0
-    else:
-        debug_print(f"✅ 搅拌速度 {stir_speed} RPM 在正常范围内 🌪️")
-    
-    # ⏱️ 沉降时间验证
+
     if settling_time < 0 or settling_time > 600:  # 限制为10分钟
-        debug_print(f"⚠️ 沉降时间 {settling_time}s 超出范围，修正为 60s ⏱️")
+        debug_print(f"沉降时间 {settling_time}s 超出范围，修正为 60s")
         settling_time = 60.0
-    else:
-        debug_print(f"✅ 沉降时间 {settling_time}s 在正常范围内 ⏱️")
-    
+
     return stir_time, stir_speed, settling_time
 
-def extract_vessel_id(vessel: Union[str, dict]) -> str:
-    """
-    从vessel参数中提取vessel_id
-    
-    Args:
-        vessel: vessel字典或vessel_id字符串
-        
-    Returns:
-        str: vessel_id
-    """
-    if isinstance(vessel, dict):
-        vessel_id = list(vessel.values())[0].get("id", "")
-        debug_print(f"🔧 从vessel字典提取ID: {vessel_id}")
-        return vessel_id
-    elif isinstance(vessel, str):
-        debug_print(f"🔧 vessel参数为字符串: {vessel}")
-        return vessel
-    else:
-        debug_print(f"⚠️ 无效的vessel参数类型: {type(vessel)}")
-        return ""
+def extract_vessel_id(vessel) -> str:
+    """从vessel参数中提取vessel_id，兼容 str / dict / ResourceDictInstance"""
+    return get_resource_id(vessel)
 
-def get_vessel_display_info(vessel: Union[str, dict]) -> str:
-    """
-    获取容器的显示信息（用于日志）
-    
-    Args:
-        vessel: vessel字典或vessel_id字符串
-        
-    Returns:
-        str: 显示信息
-    """
-    if isinstance(vessel, dict):
-        vessel_id = vessel.get("id", "unknown")
-        vessel_name = vessel.get("name", "")
-        if vessel_name:
-            return f"{vessel_id} ({vessel_name})"
-        else:
-            return vessel_id
-    else:
-        return str(vessel)
+def get_vessel_display_info(vessel) -> str:
+    """获取容器的显示信息（用于日志），兼容 str / dict / ResourceDictInstance"""
+    return get_resource_display_info(vessel)
 
 def generate_stir_protocol(
     G: nx.DiGraph,
@@ -125,16 +49,13 @@ def generate_stir_protocol(
 ) -> List[Dict[str, Any]]:
     """生成搅拌操作的协议序列 - 修复vessel参数传递"""
     
-    # 🔧 核心修改：正确处理vessel参数
     vessel_id = extract_vessel_id(vessel)
     vessel_display = get_vessel_display_info(vessel)
-    
-    # 🔧 关键修复：确保vessel_resource是完整的Resource对象
+
+    # 确保vessel_resource是完整的Resource对象
     if isinstance(vessel, dict):
-        vessel_resource = vessel  # 已经是完整的Resource字典
-        debug_print(f"✅ 使用传入的vessel Resource对象")
+        vessel_resource = vessel
     else:
-        # 如果只是字符串，构建一个基本的Resource对象
         vessel_resource = {
             "id": vessel,
             "name": "",
@@ -150,91 +71,60 @@ def generate_stir_protocol(
             "sample_id": "",
             "type": ""
         }
-        debug_print(f"🔧 构建了基本的vessel Resource对象: {vessel}")
-    
-    debug_print("🌪️" * 20)
-    debug_print("🚀 开始生成搅拌协议（支持vessel字典）✨")
-    debug_print(f"📝 输入参数:")
-    debug_print(f"  🥽 vessel: {vessel_display} (ID: {vessel_id})")
-    debug_print(f"  ⏰ time: {time}")
-    debug_print(f"  🕐 stir_time: {stir_time}")
-    debug_print(f"  🎯 time_spec: {time_spec}")
-    debug_print(f"  🌪️ stir_speed: {stir_speed} RPM")
-    debug_print(f"  ⏱️ settling_time: {settling_time}")
-    debug_print("🌪️" * 20)
-    
-    # 📋 参数验证
-    debug_print("📍 步骤1: 参数验证... 🔧")
-    if not vessel_id:  # 🔧 使用 vessel_id
-        debug_print("❌ vessel 参数不能为空! 😱")
+
+    # 参数验证
+    if not vessel_id:
         raise ValueError("vessel 参数不能为空")
-    
-    if vessel_id not in G.nodes():  # 🔧 使用 vessel_id
-        debug_print(f"❌ 容器 '{vessel_id}' 不存在于系统中! 😞")
+
+    if vessel_id not in G.nodes():
         raise ValueError(f"容器 '{vessel_id}' 不存在于系统中")
     
-    debug_print("✅ 基础参数验证通过 🎯")
-    
-    # 🔄 参数解析
-    debug_print("📍 步骤2: 参数解析... ⚡")
-    
-    # 确定实际时间（优先级：time_spec > stir_time > time）
+    # 参数解析 — 确定实际时间（优先级：time_spec > stir_time > time）
     if time_spec:
         parsed_time = parse_time_input(time_spec)
-        debug_print(f"🎯 使用time_spec: '{time_spec}' → {parsed_time}s")
     elif stir_time not in ["0", 0, 0.0]:
         parsed_time = parse_time_input(stir_time)
-        debug_print(f"🎯 使用stir_time: {stir_time} → {parsed_time}s")
     else:
         parsed_time = parse_time_input(time)
-        debug_print(f"🎯 使用time: {time} → {parsed_time}s")
     
     # 解析沉降时间
     parsed_settling_time = parse_time_input(settling_time)
     
-    # 🕐 模拟运行时间优化
-    debug_print("  ⏱️ 检查模拟运行时间限制...")
+    # 模拟运行时间优化
     original_stir_time = parsed_time
     original_settling_time = parsed_settling_time
-    
+
     # 搅拌时间限制为60秒
     stir_time_limit = 60.0
     if parsed_time > stir_time_limit:
         parsed_time = stir_time_limit
-        debug_print(f"  🎮 搅拌时间优化: {original_stir_time}s → {parsed_time}s ⚡")
-    
+
     # 沉降时间限制为30秒
     settling_time_limit = 30.0
     if parsed_settling_time > settling_time_limit:
         parsed_settling_time = settling_time_limit
-        debug_print(f"  🎮 沉降时间优化: {original_settling_time}s → {parsed_settling_time}s ⚡")
     
     # 参数修正
     parsed_time, stir_speed, parsed_settling_time = validate_and_fix_params(
         parsed_time, stir_speed, parsed_settling_time
     )
     
-    debug_print(f"🎯 最终参数: time={parsed_time}s, speed={stir_speed}RPM, settling={parsed_settling_time}s")
-    
-    # 🔍 查找设备
-    debug_print("📍 步骤3: 查找搅拌设备... 🔍")
+    debug_print(f"最终参数: time={parsed_time}s, speed={stir_speed}RPM, settling={parsed_settling_time}s")
+
+    # 查找设备
     try:
-        stirrer_id = find_connected_stirrer(G, vessel_id)  # 🔧 使用 vessel_id
-        debug_print(f"🎉 使用搅拌设备: {stirrer_id} ✨")
+        stirrer_id = find_connected_stirrer(G, vessel_id)
     except Exception as e:
-        debug_print(f"❌ 设备查找失败: {str(e)} 😭")
         raise ValueError(f"无法找到搅拌设备: {str(e)}")
-    
-    # 🚀 生成动作
-    debug_print("📍 步骤4: 生成搅拌动作... 🌪️")
+
+    # 生成动作
     
     action_sequence = []
     stir_action = {
         "device_id": stirrer_id,
         "action_name": "stir",
         "action_kwargs": {
-            # 🔧 关键修复：传递vessel_id字符串，而不是完整的Resource对象
-            "vessel": {"id": vessel_id},  # 传递字符串ID，不是Resource对象
+            "vessel": {"id": vessel_id},
             "time": str(time),
             "event": event,
             "time_spec": time_spec,
@@ -244,22 +134,14 @@ def generate_stir_protocol(
         }
     }
     action_sequence.append(stir_action)
-    debug_print("✅ 搅拌动作已添加 🌪️✨")
-    
-    # 显示时间优化信息
+
+    # 时间优化信息
     if original_stir_time != parsed_time or original_settling_time != parsed_settling_time:
-        debug_print(f"  🎭 模拟优化说明:")
-        debug_print(f"    搅拌时间: {original_stir_time/60:.1f}分钟 → {parsed_time/60:.1f}分钟")
-        debug_print(f"    沉降时间: {original_settling_time/60:.1f}分钟 → {parsed_settling_time/60:.1f}分钟")
-    
-    # 🎊 总结
-    debug_print("🎊" * 20)
-    debug_print(f"🎉 搅拌协议生成完成! ✨")
-    debug_print(f"📊 总动作数: {len(action_sequence)} 个")
-    debug_print(f"🥽 搅拌容器: {vessel_display}")
-    debug_print(f"🌪️ 搅拌参数: {stir_speed} RPM, {parsed_time}s, 沉降 {parsed_settling_time}s")
-    debug_print(f"⏱️ 预计总时间: {(parsed_time + parsed_settling_time)/60:.1f} 分钟 ⌛")
-    debug_print("🎊" * 20)
+        debug_print(f"模拟优化: 搅拌 {original_stir_time/60:.1f}min→{parsed_time/60:.1f}min, "
+                    f"沉降 {original_settling_time/60:.1f}min→{parsed_settling_time/60:.1f}min")
+
+    debug_print(f"搅拌协议生成完成: {vessel_display}, {stir_speed}RPM, "
+                f"{parsed_time}s, 沉降{parsed_settling_time}s, 总{(parsed_time + parsed_settling_time)/60:.1f}min")
     
     return action_sequence
 
@@ -272,16 +154,13 @@ def generate_start_stir_protocol(
 ) -> List[Dict[str, Any]]:
     """生成开始搅拌操作的协议序列 - 修复vessel参数传递"""
     
-    # 🔧 核心修改：正确处理vessel参数
     vessel_id = extract_vessel_id(vessel)
     vessel_display = get_vessel_display_info(vessel)
-    
-    # 🔧 关键修复：确保vessel_resource是完整的Resource对象
+
+    # 确保vessel_resource是完整的Resource对象
     if isinstance(vessel, dict):
-        vessel_resource = vessel  # 已经是完整的Resource字典
-        debug_print(f"✅ 使用传入的vessel Resource对象")
+        vessel_resource = vessel
     else:
-        # 如果只是字符串，构建一个基本的Resource对象
         vessel_resource = {
             "id": vessel,
             "name": "",
@@ -297,39 +176,29 @@ def generate_start_stir_protocol(
             "sample_id": "",
             "type": ""
         }
-        debug_print(f"🔧 构建了基本的vessel Resource对象: {vessel}")
-    
-    debug_print("🔄 开始生成启动搅拌协议（修复vessel参数）✨")
-    debug_print(f"🥽 vessel: {vessel_display} (ID: {vessel_id})")
-    debug_print(f"🌪️ speed: {stir_speed} RPM")
-    debug_print(f"🎯 purpose: {purpose}")
-    
+
     # 基础验证
     if not vessel_id or vessel_id not in G.nodes():
-        debug_print("❌ 容器验证失败!")
         raise ValueError("vessel 参数无效")
-    
+
     # 参数修正
     if stir_speed < 10.0 or stir_speed > 1500.0:
-        debug_print(f"⚠️ 搅拌速度修正: {stir_speed} → 300 RPM 🌪️")
         stir_speed = 300.0
-    
+
     # 查找设备
     stirrer_id = find_connected_stirrer(G, vessel_id)
-    
-    # 🔧 关键修复：传递vessel_id字符串
+
     action_sequence = [{
         "device_id": stirrer_id,
         "action_name": "start_stir",
         "action_kwargs": {
-            # 🔧 关键修复：传递vessel_id字符串，而不是完整的Resource对象
-            "vessel": {"id": vessel_id},  # 传递字符串ID，不是Resource对象
+            "vessel": {"id": vessel_id},
             "stir_speed": stir_speed,
             "purpose": purpose or f"启动搅拌 {stir_speed} RPM"
         }
     }]
-    
-    debug_print(f"✅ 启动搅拌协议生成完成 🎯")
+
+    debug_print(f"启动搅拌协议: {vessel_display}, {stir_speed}RPM, device={stirrer_id}")
     return action_sequence
 
 def generate_stop_stir_protocol(
@@ -339,16 +208,13 @@ def generate_stop_stir_protocol(
 ) -> List[Dict[str, Any]]:
     """生成停止搅拌操作的协议序列 - 修复vessel参数传递"""
     
-    # 🔧 核心修改：正确处理vessel参数
     vessel_id = extract_vessel_id(vessel)
     vessel_display = get_vessel_display_info(vessel)
-    
-    # 🔧 关键修复：确保vessel_resource是完整的Resource对象
+
+    # 确保vessel_resource是完整的Resource对象
     if isinstance(vessel, dict):
-        vessel_resource = vessel  # 已经是完整的Resource字典
-        debug_print(f"✅ 使用传入的vessel Resource对象")
+        vessel_resource = vessel
     else:
-        # 如果只是字符串，构建一个基本的Resource对象
         vessel_resource = {
             "id": vessel,
             "name": "",
@@ -364,115 +230,103 @@ def generate_stop_stir_protocol(
             "sample_id": "",
             "type": ""
         }
-        debug_print(f"🔧 构建了基本的vessel Resource对象: {vessel}")
-    
-    debug_print("🛑 开始生成停止搅拌协议（修复vessel参数）✨")
-    debug_print(f"🥽 vessel: {vessel_display} (ID: {vessel_id})")
-    
+
     # 基础验证
     if not vessel_id or vessel_id not in G.nodes():
-        debug_print("❌ 容器验证失败!")
         raise ValueError("vessel 参数无效")
-    
+
     # 查找设备
     stirrer_id = find_connected_stirrer(G, vessel_id)
-    
-    # 🔧 关键修复：传递vessel_id字符串
+
     action_sequence = [{
         "device_id": stirrer_id,
         "action_name": "stop_stir",
         "action_kwargs": {
-            # 🔧 关键修复：传递vessel_id字符串，而不是完整的Resource对象
-            "vessel": {"id": vessel_id},  # 传递字符串ID，不是Resource对象
+            "vessel": {"id": vessel_id},
         }
     }]
-    
-    debug_print(f"✅ 停止搅拌协议生成完成 🎯")
+
+    debug_print(f"停止搅拌协议: {vessel_display}, device={stirrer_id}")
     return action_sequence
 
-# 🔧 新增：便捷函数
+# 便捷函数
 def stir_briefly(G: nx.DiGraph, vessel: Union[str, dict], 
                 speed: float = 300.0) -> List[Dict[str, Any]]:
     """短时间搅拌（30秒）"""
     vessel_display = get_vessel_display_info(vessel)
-    debug_print(f"⚡ 短时间搅拌: {vessel_display} @ {speed}RPM (30s)")
+    debug_print(f"短时间搅拌: {vessel_display} @ {speed}RPM (30s)")
     return generate_stir_protocol(G, vessel, time="30", stir_speed=speed)
 
 def stir_slowly(G: nx.DiGraph, vessel: Union[str, dict], 
                time: Union[str, float] = "10 min") -> List[Dict[str, Any]]:
     """慢速搅拌"""
     vessel_display = get_vessel_display_info(vessel)
-    debug_print(f"🐌 慢速搅拌: {vessel_display} @ 150RPM")
+    debug_print(f"慢速搅拌: {vessel_display} @ 150RPM")
     return generate_stir_protocol(G, vessel, time=time, stir_speed=150.0)
 
 def stir_vigorously(G: nx.DiGraph, vessel: Union[str, dict], 
                    time: Union[str, float] = "5 min") -> List[Dict[str, Any]]:
     """剧烈搅拌"""
     vessel_display = get_vessel_display_info(vessel)
-    debug_print(f"💨 剧烈搅拌: {vessel_display} @ 800RPM")
+    debug_print(f"剧烈搅拌: {vessel_display} @ 800RPM")
     return generate_stir_protocol(G, vessel, time=time, stir_speed=800.0)
 
 def stir_for_reaction(G: nx.DiGraph, vessel: Union[str, dict], 
                      time: Union[str, float] = "1 h") -> List[Dict[str, Any]]:
     """反应搅拌（标准速度，长时间）"""
     vessel_display = get_vessel_display_info(vessel)
-    debug_print(f"🧪 反应搅拌: {vessel_display} @ 400RPM")
+    debug_print(f"反应搅拌: {vessel_display} @ 400RPM")
     return generate_stir_protocol(G, vessel, time=time, stir_speed=400.0)
 
 def stir_for_dissolution(G: nx.DiGraph, vessel: Union[str, dict], 
                         time: Union[str, float] = "15 min") -> List[Dict[str, Any]]:
     """溶解搅拌（中等速度）"""
     vessel_display = get_vessel_display_info(vessel)
-    debug_print(f"💧 溶解搅拌: {vessel_display} @ 500RPM")
+    debug_print(f"溶解搅拌: {vessel_display} @ 500RPM")
     return generate_stir_protocol(G, vessel, time=time, stir_speed=500.0)
 
 def stir_gently(G: nx.DiGraph, vessel: Union[str, dict], 
                time: Union[str, float] = "30 min") -> List[Dict[str, Any]]:
     """温和搅拌"""
     vessel_display = get_vessel_display_info(vessel)
-    debug_print(f"🍃 温和搅拌: {vessel_display} @ 200RPM")
+    debug_print(f"温和搅拌: {vessel_display} @ 200RPM")
     return generate_stir_protocol(G, vessel, time=time, stir_speed=200.0)
 
 def stir_overnight(G: nx.DiGraph, vessel: Union[str, dict]) -> List[Dict[str, Any]]:
     """过夜搅拌（模拟时缩短为2小时）"""
     vessel_display = get_vessel_display_info(vessel)
-    debug_print(f"🌙 过夜搅拌（模拟2小时）: {vessel_display} @ 300RPM")
+    debug_print(f"过夜搅拌（模拟2小时）: {vessel_display} @ 300RPM")
     return generate_stir_protocol(G, vessel, time="2 h", stir_speed=300.0)
 
 def start_continuous_stirring(G: nx.DiGraph, vessel: Union[str, dict], 
                              speed: float = 300.0, purpose: str = "continuous stirring") -> List[Dict[str, Any]]:
     """开始连续搅拌"""
     vessel_display = get_vessel_display_info(vessel)
-    debug_print(f"🔄 开始连续搅拌: {vessel_display} @ {speed}RPM")
+    debug_print(f"开始连续搅拌: {vessel_display} @ {speed}RPM")
     return generate_start_stir_protocol(G, vessel, stir_speed=speed, purpose=purpose)
 
 def stop_all_stirring(G: nx.DiGraph, vessel: Union[str, dict]) -> List[Dict[str, Any]]:
     """停止所有搅拌"""
     vessel_display = get_vessel_display_info(vessel)
-    debug_print(f"🛑 停止搅拌: {vessel_display}")
+    debug_print(f"停止搅拌: {vessel_display}")
     return generate_stop_stir_protocol(G, vessel)
 
 # 测试函数
 def test_stir_protocol():
     """测试搅拌协议"""
-    debug_print("🧪 === STIR PROTOCOL 测试 === ✨")
-    
-    # 测试vessel参数处理
-    debug_print("🔧 测试vessel参数处理...")
-    
     # 测试字典格式
     vessel_dict = {"id": "flask_1", "name": "反应瓶1"}
     vessel_id = extract_vessel_id(vessel_dict)
     vessel_display = get_vessel_display_info(vessel_dict)
-    debug_print(f"  字典格式: {vessel_dict} → ID: {vessel_id}, 显示: {vessel_display}")
-    
+    debug_print(f"字典格式: {vessel_dict} -> ID: {vessel_id}, 显示: {vessel_display}")
+
     # 测试字符串格式
     vessel_str = "flask_2"
     vessel_id = extract_vessel_id(vessel_str)
     vessel_display = get_vessel_display_info(vessel_str)
-    debug_print(f"  字符串格式: {vessel_str} → ID: {vessel_id}, 显示: {vessel_display}")
-    
-    debug_print("✅ 测试完成 🎉")
+    debug_print(f"字符串格式: {vessel_str} -> ID: {vessel_id}, 显示: {vessel_display}")
+
+    debug_print("测试完成")
 
 if __name__ == "__main__":
     test_stir_protocol()

unilabos/compile/utils/logger_util.py

@@ -1,36 +1,57 @@
-# 🆕 创建进度日志动作
+"""编译器共享日志工具"""
+
+import inspect
 import logging
 from typing import Dict, Any
 
-logger = logging.getLogger(__name__)
+# 模块名到前缀的映射
+_MODULE_PREFIXES = {
+    "add_protocol": "[ADD]",
+    "adjustph_protocol": "[ADJUSTPH]",
+    "clean_vessel_protocol": "[CLEAN_VESSEL]",
+    "dissolve_protocol": "[DISSOLVE]",
+    "dry_protocol": "[DRY]",
+    "evacuateandrefill_protocol": "[EVACUATE]",
+    "evaporate_protocol": "[EVAPORATE]",
+    "filter_protocol": "[FILTER]",
+    "heatchill_protocol": "[HEATCHILL]",
+    "hydrogenate_protocol": "[HYDROGENATE]",
+    "pump_protocol": "[PUMP]",
+    "recrystallize_protocol": "[RECRYSTALLIZE]",
+    "reset_handling_protocol": "[RESET]",
+    "run_column_protocol": "[RUN_COLUMN]",
+    "separate_protocol": "[SEPARATE]",
+    "stir_protocol": "[STIR]",
+    "wash_solid_protocol": "[WASH_SOLID]",
+    "vessel_parser": "[VESSEL_PARSER]",
+    "unit_parser": "[UNIT_PARSER]",
+    "resource_helper": "[RESOURCE_HELPER]",
+}
 
-def debug_print(message, prefix="[UNIT_PARSER]"):
-    """调试输出"""
+
+def debug_print(message, prefix=None):
+    """调试输出 — 自动根据调用模块设置前缀"""
+    if prefix is None:
+        frame = inspect.currentframe()
+        caller = frame.f_back if frame else None
+        module_name = ""
+        if caller:
+            module_name = caller.f_globals.get("__name__", "")
+            # 取最后一段作为模块短名
+            module_name = module_name.rsplit(".", 1)[-1]
+        prefix = _MODULE_PREFIXES.get(module_name, f"[{module_name.upper()}]")
+    logger = logging.getLogger("unilabos.compile")
     logger.info(f"{prefix} {message}")
 
 
 def action_log(message: str, emoji: str = "📝", prefix="[HIGH-LEVEL OPERATION]") -> Dict[str, Any]:
-    """创建一个动作日志 - 支持中文和emoji"""
-    try:
-        full_message = f"{prefix} {emoji} {message}"
-
-        return {
-            "action_name": "wait",
-            "action_kwargs": {
-                "time": 0.1,
-                "log_message": full_message,
-                "progress_message": full_message
-            }
+    """创建一个动作日志"""
+    full_message = f"{prefix} {emoji} {message}"
+    return {
+        "action_name": "wait",
+        "action_kwargs": {
+            "time": 0.1,
+            "log_message": full_message,
+            "progress_message": full_message
         }
-    except Exception as e:
-        # 如果emoji有问题，使用纯文本
-        safe_message = f"{prefix} {message}"
-
-        return {
-            "action_name": "wait",
-            "action_kwargs": {
-                "time": 0.1,
-                "log_message": safe_message,
-                "progress_message": safe_message
-            }
-        }
+    }

unilabos/compile/utils/resource_helper.py

@@ -0,0 +1,172 @@
+"""
+资源实例兼容层
+
+提供 ensure_resource_instance() 将 dict / ResourceDictInstance 统一转为
+ResourceDictInstance，使编译器可以渐进式迁移到强类型资源。
+"""
+
+from typing import Any, Dict, Optional, Union
+
+from unilabos.resources.resource_tracker import ResourceDictInstance
+
+
+def ensure_resource_instance(
+    resource: Union[Dict[str, Any], ResourceDictInstance, None],
+) -> Optional[ResourceDictInstance]:
+    """将 dict 或 ResourceDictInstance 统一转为 ResourceDictInstance
+
+    编译器入口统一调用此函数，即可同时兼容旧 dict 传参和新 ResourceDictInstance 传参。
+
+    Args:
+        resource: 资源数据，可以是 plain dict、ResourceDictInstance 或 None
+
+    Returns:
+        ResourceDictInstance 或 None（当输入为 None 时）
+    """
+    if resource is None:
+        return None
+    if isinstance(resource, ResourceDictInstance):
+        return resource
+    if isinstance(resource, dict):
+        return ResourceDictInstance.get_resource_instance_from_dict(resource)
+    raise TypeError(f"不支持的资源类型: {type(resource)}, 期望 dict 或 ResourceDictInstance")
+
+
+def resource_to_dict(resource: Union[Dict[str, Any], ResourceDictInstance]) -> Dict[str, Any]:
+    """将 ResourceDictInstance 或 dict 统一转为 plain dict
+
+    用于需要 dict 操作的场景（如 children dict 操作）。
+
+    Args:
+        resource: ResourceDictInstance 或 dict
+
+    Returns:
+        plain dict
+    """
+    if isinstance(resource, dict):
+        return resource
+    if isinstance(resource, ResourceDictInstance):
+        return resource.get_plr_nested_dict()
+    raise TypeError(f"不支持的资源类型: {type(resource)}")
+
+
+def get_resource_id(resource: Union[str, Dict[str, Any], ResourceDictInstance]) -> str:
+    """从资源对象中提取 ID
+
+    Args:
+        resource: 字符串 ID、dict 或 ResourceDictInstance
+
+    Returns:
+        资源 ID 字符串
+    """
+    if isinstance(resource, str):
+        return resource
+    if isinstance(resource, ResourceDictInstance):
+        return resource.res_content.id
+    if isinstance(resource, dict):
+        if "id" in resource:
+            return resource["id"]
+        # 兼容 {station_id: {...}} 格式
+        first_val = next(iter(resource.values()), {})
+        if isinstance(first_val, dict):
+            return first_val.get("id", "")
+        return ""
+    raise TypeError(f"不支持的资源类型: {type(resource)}")
+
+
+def get_resource_data(resource: Union[str, Dict[str, Any], ResourceDictInstance]) -> Dict[str, Any]:
+    """从资源对象中提取 data 字段
+
+    Args:
+        resource: 字符串、dict 或 ResourceDictInstance
+
+    Returns:
+        data 字典
+    """
+    if isinstance(resource, str):
+        return {}
+    if isinstance(resource, ResourceDictInstance):
+        return dict(resource.res_content.data)
+    if isinstance(resource, dict):
+        return resource.get("data", {})
+    return {}
+
+
+def get_resource_display_info(resource: Union[str, Dict[str, Any], ResourceDictInstance]) -> str:
+    """获取资源的显示信息（用于日志）
+
+    Args:
+        resource: 字符串 ID、dict 或 ResourceDictInstance
+
+    Returns:
+        显示信息字符串
+    """
+    if isinstance(resource, str):
+        return resource
+    if isinstance(resource, ResourceDictInstance):
+        res = resource.res_content
+        return f"{res.id} ({res.name})" if res.name and res.name != res.id else res.id
+    if isinstance(resource, dict):
+        res_id = resource.get("id", "unknown")
+        res_name = resource.get("name", "")
+        if res_name and res_name != res_id:
+            return f"{res_id} ({res_name})"
+        return res_id
+    return str(resource)
+
+
+def get_resource_liquid_volume(resource: Union[Dict[str, Any], ResourceDictInstance]) -> float:
+    """从资源中获取液体体积
+
+    Args:
+        resource: dict 或 ResourceDictInstance
+
+    Returns:
+        液体总体积 (mL)
+    """
+    data = get_resource_data(resource)
+    liquids = data.get("liquid", [])
+    if isinstance(liquids, list):
+        return sum(l.get("volume", 0.0) for l in liquids if isinstance(l, dict))
+    return 0.0
+
+
+def update_vessel_volume(vessel, G, new_volume: float, description: str = "") -> None:
+    """
+    更新容器体积（同时更新vessel字典和图节点）
+
+    Args:
+        vessel: 容器字典或 ResourceDictInstance
+        G: 网络图 (nx.DiGraph)
+        new_volume: 新体积 (mL)
+        description: 更新描述（用于日志）
+    """
+    import logging
+    logger = logging.getLogger("unilabos.compile")
+
+    vessel_id = get_resource_id(vessel)
+
+    if description:
+        logger.info(f"[RESOURCE] 更新容器体积 - {description}")
+
+    # 更新 vessel 字典中的体积
+    if isinstance(vessel, dict):
+        if "data" not in vessel:
+            vessel["data"] = {}
+        lv = vessel["data"].get("liquid_volume")
+        if isinstance(lv, list) and len(lv) > 0:
+            vessel["data"]["liquid_volume"][0] = new_volume
+        else:
+            vessel["data"]["liquid_volume"] = new_volume
+
+    # 同时更新图中的容器数据
+    if vessel_id and vessel_id in G.nodes():
+        if "data" not in G.nodes[vessel_id]:
+            G.nodes[vessel_id]["data"] = {}
+        node_lv = G.nodes[vessel_id]["data"].get("liquid_volume")
+        if isinstance(node_lv, list) and len(node_lv) > 0:
+            G.nodes[vessel_id]["data"]["liquid_volume"][0] = new_volume
+        else:
+            G.nodes[vessel_id]["data"]["liquid_volume"] = new_volume
+
+    logger.info(f"[RESOURCE] 容器 '{vessel_id}' 体积已更新为: {new_volume:.2f}mL")

unilabos/compile/utils/unit_parser.py

@@ -184,6 +184,42 @@ def parse_time_input(time_input: Union[str, float]) -> float:
 
     return time_sec
 
+
+def parse_temperature_input(temp_input: Union[str, float], default_temp: float = 25.0) -> float:
+    """
+    解析温度输入，支持字符串和数值
+
+    Args:
+        temp_input: 温度输入（如 "256 °C", "reflux", 45.0）
+        default_temp: 默认温度
+
+    Returns:
+        float: 温度（°C）
+    """
+    if not temp_input:
+        return default_temp
+
+    if isinstance(temp_input, (int, float)):
+        return float(temp_input)
+
+    temp_str = str(temp_input).lower().strip()
+
+    # 特殊温度关键词
+    special_temps = {
+        "room temperature": 25.0, "reflux": 78.0, "ice bath": 0.0,
+        "boiling": 100.0, "hot": 60.0, "warm": 40.0, "cold": 10.0,
+    }
+    if temp_str in special_temps:
+        return special_temps[temp_str]
+
+    # 正则解析（如 "256 °C", "45°C", "45"）
+    match = re.search(r'(\d+(?:\.\d+)?)\s*°?[cf]?', temp_str)
+    if match:
+        return float(match.group(1))
+
+    debug_print(f"无法解析温度: '{temp_str}'，使用默认值: {default_temp}°C")
+    return default_temp
+
 # 测试函数
 def test_unit_parser():
     """测试单位解析功能"""

unilabos/compile/utils/vessel_parser.py

@@ -1,27 +1,23 @@
 import networkx as nx
 
 from .logger_util import debug_print
+from .resource_helper import get_resource_id, get_resource_data
 
 
 def get_vessel(vessel):
     """
     统一处理vessel参数，返回vessel_id和vessel_data。
+    支持 dict、str、ResourceDictInstance。
 
     Args:
-        vessel: 可以是一个字典或字符串，表示vessel的ID或数据。
+        vessel: 可以是一个字典、字符串或 ResourceDictInstance，表示vessel的ID或数据。
 
     Returns:
         tuple: 包含vessel_id和vessel_data。
     """
-    if isinstance(vessel, dict):
-        if "id" not in vessel:
-            vessel_id = list(vessel.values())[0].get("id", "")
-        else:
-            vessel_id = vessel.get("id", "")
-        vessel_data = vessel.get("data", {})
-    else:
-        vessel_id = str(vessel)
-        vessel_data = {}
+    # 统一使用 resource_helper 处理
+    vessel_id = get_resource_id(vessel)
+    vessel_data = get_resource_data(vessel)
     return vessel_id, vessel_data
 
 
@@ -278,4 +274,31 @@ def find_solid_dispenser(G: nx.DiGraph) -> str:
             return node
 
     debug_print(f"❌ 未找到固体加样器")
-    return ""
+    return ""
+
+
+def find_connected_heatchill(G: nx.DiGraph, vessel: str) -> str:
+    """查找与指定容器相连的加热/冷却设备"""
+    heatchill_nodes = []
+    for node in G.nodes():
+        node_data = G.nodes[node]
+        node_class = node_data.get('class', '') or ''
+        node_name = node.lower()
+        if ('heatchill' in node_class.lower() or 'virtual_heatchill' in node_class
+                or 'heater' in node_name or 'heat' in node_name):
+            heatchill_nodes.append(node)
+
+    # 检查连接
+    if vessel and heatchill_nodes:
+        for hc in heatchill_nodes:
+            if G.has_edge(hc, vessel) or G.has_edge(vessel, hc):
+                debug_print(f"加热设备 '{hc}' 与容器 '{vessel}' 相连")
+                return hc
+
+    # 使用第一个可用设备
+    if heatchill_nodes:
+        debug_print(f"使用第一个加热设备: {heatchill_nodes[0]}")
+        return heatchill_nodes[0]
+
+    debug_print("未找到加热设备，使用默认设备")
+    return "heatchill_1"

unilabos/compile/wash_solid_protocol.py

@@ -4,199 +4,55 @@ import logging
 import re
 
 from .utils.unit_parser import parse_time_input, parse_volume_input
+from .utils.resource_helper import get_resource_id, get_resource_display_info, get_resource_liquid_volume, update_vessel_volume
+from .utils.logger_util import debug_print
 
 logger = logging.getLogger(__name__)
 
-def debug_print(message):
-    """调试输出"""
-    logger.info(f"[WASH_SOLID] {message}")
-
 
 def find_solvent_source(G: nx.DiGraph, solvent: str) -> str:
-    """查找溶剂源（精简版）"""
-    debug_print(f"🔍 查找溶剂源: {solvent}")
-    
-    # 简化搜索列表
+    """查找溶剂源"""
     search_patterns = [
         f"flask_{solvent}", f"bottle_{solvent}", f"reagent_{solvent}",
         "liquid_reagent_bottle_1", "flask_1", "solvent_bottle"
     ]
-    
+
     for pattern in search_patterns:
         if pattern in G.nodes():
-            debug_print(f"🎉 找到溶剂源: {pattern}")
+            debug_print(f"找到溶剂源: {pattern}")
             return pattern
-    
-    debug_print(f"⚠️ 使用默认溶剂源: flask_{solvent}")
+
+    debug_print(f"使用默认溶剂源: flask_{solvent}")
     return f"flask_{solvent}"
 
 def find_filtrate_vessel(G: nx.DiGraph, filtrate_vessel: str = "") -> str:
-    """查找滤液容器（精简版）"""
-    debug_print(f"🔍 查找滤液容器: {filtrate_vessel}")
-    
-    # 如果指定了且存在，直接使用
+    """查找滤液容器"""
     if filtrate_vessel and filtrate_vessel in G.nodes():
-        debug_print(f"✅ 使用指定容器: {filtrate_vessel}")
         return filtrate_vessel
-    
-    # 简化搜索列表
+
     default_vessels = ["waste_workup", "filtrate_vessel", "flask_1", "collection_bottle_1"]
-    
+
     for vessel in default_vessels:
         if vessel in G.nodes():
-            debug_print(f"🎉 找到滤液容器: {vessel}")
+            debug_print(f"找到滤液容器: {vessel}")
             return vessel
-    
-    debug_print(f"⚠️ 使用默认滤液容器: waste_workup")
+
     return "waste_workup"
 
-def extract_vessel_id(vessel: Union[str, dict]) -> str:
-    """
-    从vessel参数中提取vessel_id
-    
-    Args:
-        vessel: vessel字典或vessel_id字符串
-        
-    Returns:
-        str: vessel_id
-    """
-    if isinstance(vessel, dict):
-        vessel_id = list(vessel.values())[0].get("id", "")
-        debug_print(f"🔧 从vessel字典提取ID: {vessel_id}")
-        return vessel_id
-    elif isinstance(vessel, str):
-        debug_print(f"🔧 vessel参数为字符串: {vessel}")
-        return vessel
-    else:
-        debug_print(f"⚠️ 无效的vessel参数类型: {type(vessel)}")
-        return ""
+def extract_vessel_id(vessel) -> str:
+    """从vessel参数中提取vessel_id，兼容 str / dict / ResourceDictInstance"""
+    return get_resource_id(vessel)
 
-def get_vessel_display_info(vessel: Union[str, dict]) -> str:
-    """
-    获取容器的显示信息（用于日志）
-    
-    Args:
-        vessel: vessel字典或vessel_id字符串
-        
-    Returns:
-        str: 显示信息
-    """
-    if isinstance(vessel, dict):
-        vessel_id = vessel.get("id", "unknown")
-        vessel_name = vessel.get("name", "")
-        if vessel_name:
-            return f"{vessel_id} ({vessel_name})"
-        else:
-            return vessel_id
-    else:
-        return str(vessel)
-
-def get_vessel_liquid_volume(vessel: dict) -> float:
-    """
-    获取容器中的液体体积 - 支持vessel字典
-    
-    Args:
-        vessel: 容器字典
-        
-    Returns:
-        float: 液体体积（mL）
-    """
-    if not vessel or "data" not in vessel:
-        debug_print(f"⚠️ 容器数据为空，返回 0.0mL")
-        return 0.0
-    
-    vessel_data = vessel["data"]
-    vessel_id = vessel.get("id", "unknown")
-    
-    debug_print(f"🔍 读取容器 '{vessel_id}' 体积数据: {vessel_data}")
-    
-    # 检查liquid_volume字段
-    if "liquid_volume" in vessel_data:
-        liquid_volume = vessel_data["liquid_volume"]
-        
-        # 处理列表格式
-        if isinstance(liquid_volume, list):
-            if len(liquid_volume) > 0:
-                volume = liquid_volume[0]
-                if isinstance(volume, (int, float)):
-                    debug_print(f"✅ 容器 '{vessel_id}' 体积: {volume}mL (列表格式)")
-                    return float(volume)
-        
-        # 处理直接数值格式
-        elif isinstance(liquid_volume, (int, float)):
-            debug_print(f"✅ 容器 '{vessel_id}' 体积: {liquid_volume}mL (数值格式)")
-            return float(liquid_volume)
-    
-    # 检查其他可能的体积字段
-    volume_keys = ['current_volume', 'total_volume', 'volume']
-    for key in volume_keys:
-        if key in vessel_data:
-            try:
-                volume = float(vessel_data[key])
-                if volume > 0:
-                    debug_print(f"✅ 容器 '{vessel_id}' 体积: {volume}mL (字段: {key})")
-                    return volume
-            except (ValueError, TypeError):
-                continue
-    
-    debug_print(f"⚠️ 无法获取容器 '{vessel_id}' 的体积，返回默认值 0.0mL")
-    return 0.0
-
-def update_vessel_volume(vessel: dict, G: nx.DiGraph, new_volume: float, description: str = "") -> None:
-    """
-    更新容器体积（同时更新vessel字典和图节点）
-    
-    Args:
-        vessel: 容器字典
-        G: 网络图
-        new_volume: 新体积
-        description: 更新描述
-    """
-    vessel_id = vessel.get("id", "unknown")
-    
-    if description:
-        debug_print(f"🔧 更新容器体积 - {description}")
-    
-    # 更新vessel字典中的体积
-    if "data" in vessel:
-        if "liquid_volume" in vessel["data"]:
-            current_volume = vessel["data"]["liquid_volume"]
-            if isinstance(current_volume, list):
-                if len(current_volume) > 0:
-                    vessel["data"]["liquid_volume"][0] = new_volume
-                else:
-                    vessel["data"]["liquid_volume"] = [new_volume]
-            else:
-                vessel["data"]["liquid_volume"] = new_volume
-        else:
-            vessel["data"]["liquid_volume"] = new_volume
-    else:
-        vessel["data"] = {"liquid_volume": new_volume}
-    
-    # 同时更新图中的容器数据
-    if vessel_id in G.nodes():
-        if 'data' not in G.nodes[vessel_id]:
-            G.nodes[vessel_id]['data'] = {}
-        
-        vessel_node_data = G.nodes[vessel_id]['data']
-        current_node_volume = vessel_node_data.get('liquid_volume', 0.0)
-        
-        if isinstance(current_node_volume, list):
-            if len(current_node_volume) > 0:
-                G.nodes[vessel_id]['data']['liquid_volume'][0] = new_volume
-            else:
-                G.nodes[vessel_id]['data']['liquid_volume'] = [new_volume]
-        else:
-            G.nodes[vessel_id]['data']['liquid_volume'] = new_volume
-    
-    debug_print(f"📊 容器 '{vessel_id}' 体积已更新为: {new_volume:.2f}mL")
+def get_vessel_display_info(vessel) -> str:
+    """获取容器的显示信息（用于日志），兼容 str / dict / ResourceDictInstance"""
+    return get_resource_display_info(vessel)
 
 def generate_wash_solid_protocol(
     G: nx.DiGraph,
-    vessel: Union[str, dict],  # 🔧 修改：支持vessel字典
+    vessel: Union[str, dict],
     solvent: str,
     volume: Union[float, str] = "50",
-    filtrate_vessel: Union[str, dict] = "",  # 🔧 修改：支持vessel字典
+    filtrate_vessel: Union[str, dict] = "",
     temp: float = 25.0,
     stir: bool = False,
     stir_speed: float = 0.0,
@@ -210,7 +66,7 @@ def generate_wash_solid_protocol(
 ) -> List[Dict[str, Any]]:
     """
     生成固体清洗协议 - 支持vessel字典和体积运算
-    
+
     Args:
         G: 有向图，节点为设备和容器，边为流体管道
         vessel: 清洗容器字典（从XDL传入）或容器ID字符串
@@ -227,106 +83,78 @@ def generate_wash_solid_protocol(
         mass: 固体质量（用于计算溶剂用量）
         event: 事件描述
         **kwargs: 其他可选参数
-    
+
     Returns:
         List[Dict[str, Any]]: 固体清洗操作的动作序列
     """
-    
-    # 🔧 核心修改：从vessel参数中提取vessel_id
+
     vessel_id = extract_vessel_id(vessel)
     vessel_display = get_vessel_display_info(vessel)
-    
-    # 🔧 处理filtrate_vessel参数
+
     filtrate_vessel_id = extract_vessel_id(filtrate_vessel) if filtrate_vessel else ""
-    
-    debug_print("🧼" * 20)
-    debug_print("🚀 开始生成固体清洗协议（支持vessel字典和体积运算）✨")
-    debug_print(f"📝 输入参数:")
-    debug_print(f"  🥽 vessel: {vessel_display} (ID: {vessel_id})")
-    debug_print(f"  🧪 solvent: {solvent}")
-    debug_print(f"  💧 volume: {volume}")
-    debug_print(f"  🗑️ filtrate_vessel: {filtrate_vessel_id}")
-    debug_print(f"  ⏰ time: {time}")
-    debug_print(f"  🔄 repeats: {repeats}")
-    debug_print("🧼" * 20)
-    
-    # 🔧 新增：记录清洗前的容器状态
-    debug_print("🔍 记录清洗前容器状态...")
+
+    debug_print(f"开始生成固体清洗协议: vessel={vessel_id}, solvent={solvent}, volume={volume}, repeats={repeats}")
+
+    # 记录清洗前的容器状态
     if isinstance(vessel, dict):
-        original_volume = get_vessel_liquid_volume(vessel)
-        debug_print(f"📊 清洗前液体体积: {original_volume:.2f}mL")
+        original_volume = get_resource_liquid_volume(vessel)
     else:
         original_volume = 0.0
-        debug_print(f"📊 vessel为字符串格式，无法获取体积信息")
-    
-    # 📋 快速验证
-    if not vessel_id or vessel_id not in G.nodes():  # 🔧 使用 vessel_id
-        debug_print("❌ 容器验证失败! 😱")
+
+    # 快速验证
+    if not vessel_id or vessel_id not in G.nodes():
         raise ValueError("vessel 参数无效")
-    
+
     if not solvent:
-        debug_print("❌ 溶剂不能为空! 😱")
         raise ValueError("solvent 参数不能为空")
-    
-    debug_print("✅ 基础验证通过 🎯")
-    
-    # 🔄 参数解析
-    debug_print("📍 步骤1: 参数解析... ⚡")
+
+    # 参数解析
     final_volume = parse_volume_input(volume, volume_spec, mass)
     final_time = parse_time_input(time)
-    
-    # 重复次数处理（简化）
+
+    # 重复次数处理
     if repeats_spec:
         spec_map = {'few': 2, 'several': 3, 'many': 4, 'thorough': 5}
         final_repeats = next((v for k, v in spec_map.items() if k in repeats_spec.lower()), repeats)
     else:
-        final_repeats = max(1, min(repeats, 5))  # 限制1-5次
-    
-    # 🕐 模拟时间优化
-    debug_print("  ⏱️ 模拟时间优化...")
+        final_repeats = max(1, min(repeats, 5))
+
+    # 模拟时间优化
     original_time = final_time
     if final_time > 60.0:
-        final_time = 60.0  # 限制最长60秒
-        debug_print(f"  🎮 时间优化: {original_time}s → {final_time}s ⚡")
-    
+        final_time = 60.0
+        debug_print(f"时间优化: {original_time}s -> {final_time}s")
+
     # 参数修正
-    temp = max(25.0, min(temp, 80.0))  # 温度范围25-80°C
-    stir_speed = max(0.0, min(stir_speed, 300.0)) if stir else 0.0  # 速度范围0-300
-    
-    debug_print(f"🎯 最终参数: 体积={final_volume}mL, 时间={final_time}s, 重复={final_repeats}次")
-    
-    # 🔍 查找设备
-    debug_print("📍 步骤2: 查找设备... 🔍")
+    temp = max(25.0, min(temp, 80.0))
+    stir_speed = max(0.0, min(stir_speed, 300.0)) if stir else 0.0
+
+    debug_print(f"最终参数: 体积={final_volume}mL, 时间={final_time}s, 重复={final_repeats}次")
+
+    # 查找设备
     try:
         solvent_source = find_solvent_source(G, solvent)
         actual_filtrate_vessel = find_filtrate_vessel(G, filtrate_vessel_id)
-        debug_print(f"🎉 设备配置完成 ✨")
-        debug_print(f"  🧪 溶剂源: {solvent_source}")
-        debug_print(f"  🗑️ 滤液容器: {actual_filtrate_vessel}")
     except Exception as e:
-        debug_print(f"❌ 设备查找失败: {str(e)} 😭")
         raise ValueError(f"设备查找失败: {str(e)}")
-    
-    # 🚀 生成动作序列
-    debug_print("📍 步骤3: 生成清洗动作... 🧼")
+
+    # 生成动作序列
     action_sequence = []
-    
-    # 🔧 新增：体积变化跟踪变量
+
     current_volume = original_volume
     total_solvent_used = 0.0
-    
+
     for cycle in range(final_repeats):
-        debug_print(f"  🔄 第{cycle+1}/{final_repeats}次清洗...")
-        
+        debug_print(f"第{cycle+1}/{final_repeats}次清洗")
+
         # 1. 转移溶剂
         try:
             from .pump_protocol import generate_pump_protocol_with_rinsing
-            
-            debug_print(f"    💧 添加溶剂: {final_volume}mL {solvent}")
+
             transfer_actions = generate_pump_protocol_with_rinsing(
                 G=G,
                 from_vessel=solvent_source,
-                to_vessel=vessel_id,  # 🔧 使用 vessel_id
+                to_vessel=vessel_id,
                 volume=final_volume,
                 amount="",
                 time=0.0,
@@ -338,211 +166,160 @@ def generate_wash_solid_protocol(
                 flowrate=2.5,
                 transfer_flowrate=0.5
             )
-            
+
             if transfer_actions:
                 action_sequence.extend(transfer_actions)
-                debug_print(f"    ✅ 转移动作: {len(transfer_actions)}个 🚚")
-                
-                # 🔧 新增：更新体积 - 添加溶剂后
+
                 current_volume += final_volume
                 total_solvent_used += final_volume
-                
+
                 if isinstance(vessel, dict):
-                    update_vessel_volume(vessel, G, current_volume, 
+                    update_vessel_volume(vessel, G, current_volume,
                                        f"第{cycle+1}次清洗添加{final_volume}mL溶剂后")
-            
+
         except Exception as e:
-            debug_print(f"    ❌ 转移失败: {str(e)} 😞")
-        
+            debug_print(f"转移失败: {str(e)}")
+
         # 2. 搅拌（如果需要）
         if stir and final_time > 0:
-            debug_print(f"    🌪️ 搅拌: {final_time}s @ {stir_speed}RPM")
             stir_action = {
                 "device_id": "stirrer_1",
                 "action_name": "stir",
                 "action_kwargs": {
-                    "vessel": {"id": vessel_id},  # 🔧 使用 vessel_id
+                    "vessel": {"id": vessel_id},
                     "time": str(time),
                     "stir_time": final_time,
                     "stir_speed": stir_speed,
-                    "settling_time": 10.0  # 🕐 缩短沉降时间
+                    "settling_time": 10.0
                 }
             }
             action_sequence.append(stir_action)
-            debug_print(f"    ✅ 搅拌动作: {final_time}s, {stir_speed}RPM 🌪️")
-        
+
         # 3. 过滤
-        debug_print(f"    🌊 过滤到: {actual_filtrate_vessel}")
         filter_action = {
             "device_id": "filter_1",
             "action_name": "filter",
             "action_kwargs": {
-                "vessel": {"id": vessel_id},  # 🔧 使用 vessel_id
+                "vessel": {"id": vessel_id},
                 "filtrate_vessel": actual_filtrate_vessel,
                 "temp": temp,
                 "volume": final_volume
             }
         }
         action_sequence.append(filter_action)
-        debug_print(f"    ✅ 过滤动作: → {actual_filtrate_vessel} 🌊")
-        
-        # 🔧 新增：更新体积 - 过滤后（液体被滤除）
-        # 假设滤液完全被移除，固体残留在容器中
-        filtered_volume = current_volume * 0.9  # 假设90%的液体被过滤掉
+
+        # 更新体积 - 过滤后
+        filtered_volume = current_volume * 0.9
         current_volume = current_volume - filtered_volume
-        
+
         if isinstance(vessel, dict):
-            update_vessel_volume(vessel, G, current_volume, 
+            update_vessel_volume(vessel, G, current_volume,
                                f"第{cycle+1}次清洗过滤后")
-        
-        # 4. 等待（缩短时间）
-        wait_time = 5.0  # 🕐 缩短等待时间：10s → 5s
+
+        # 4. 等待
+        wait_time = 5.0
         action_sequence.append({
             "action_name": "wait",
             "action_kwargs": {"time": wait_time}
         })
-        debug_print(f"    ✅ 等待: {wait_time}s ⏰")
-    
-    # 🔧 新增：清洗完成后的最终状态报告
+
+    # 最终状态
     if isinstance(vessel, dict):
-        final_volume_vessel = get_vessel_liquid_volume(vessel)
+        final_volume_vessel = get_resource_liquid_volume(vessel)
     else:
         final_volume_vessel = current_volume
-    
-    # 🎊 总结
-    debug_print("🧼" * 20)
-    debug_print(f"🎉 固体清洗协议生成完成! ✨")
-    debug_print(f"📊 协议统计:")
-    debug_print(f"  📋 总动作数: {len(action_sequence)} 个")
-    debug_print(f"  🥽 清洗容器: {vessel_display}")
-    debug_print(f"  🧪 使用溶剂: {solvent}")
-    debug_print(f"  💧 单次体积: {final_volume}mL")
-    debug_print(f"  🔄 清洗次数: {final_repeats}次")
-    debug_print(f"  💧 总溶剂用量: {total_solvent_used:.2f}mL")
-    debug_print(f"📊 体积变化统计:")
-    debug_print(f"  - 清洗前体积: {original_volume:.2f}mL")
-    debug_print(f"  - 清洗后体积: {final_volume_vessel:.2f}mL")
-    debug_print(f"  - 溶剂总用量: {total_solvent_used:.2f}mL")
-    debug_print(f"⏱️ 预计总时间: {(final_time + 5) * final_repeats / 60:.1f} 分钟")
-    debug_print("🧼" * 20)
-    
+
+    debug_print(f"固体清洗协议生成完成: {len(action_sequence)} 个动作, {final_repeats}次清洗, 溶剂总用量={total_solvent_used:.2f}mL")
+
     return action_sequence
 
-# 🔧 新增：便捷函数
-def wash_with_water(G: nx.DiGraph, vessel: Union[str, dict], 
-                   volume: Union[float, str] = "50", 
+# 便捷函数
+def wash_with_water(G: nx.DiGraph, vessel: Union[str, dict],
+                   volume: Union[float, str] = "50",
                    repeats: int = 2) -> List[Dict[str, Any]]:
     """用水清洗固体"""
-    vessel_display = get_vessel_display_info(vessel)
-    debug_print(f"💧 水洗固体: {vessel_display} ({repeats} 次)")
     return generate_wash_solid_protocol(G, vessel, "water", volume=volume, repeats=repeats)
 
-def wash_with_ethanol(G: nx.DiGraph, vessel: Union[str, dict], 
-                     volume: Union[float, str] = "30", 
+def wash_with_ethanol(G: nx.DiGraph, vessel: Union[str, dict],
+                     volume: Union[float, str] = "30",
                      repeats: int = 1) -> List[Dict[str, Any]]:
     """用乙醇清洗固体"""
-    vessel_display = get_vessel_display_info(vessel)
-    debug_print(f"🍺 乙醇洗固体: {vessel_display} ({repeats} 次)")
     return generate_wash_solid_protocol(G, vessel, "ethanol", volume=volume, repeats=repeats)
 
-def wash_with_acetone(G: nx.DiGraph, vessel: Union[str, dict], 
-                     volume: Union[float, str] = "25", 
+def wash_with_acetone(G: nx.DiGraph, vessel: Union[str, dict],
+                     volume: Union[float, str] = "25",
                      repeats: int = 1) -> List[Dict[str, Any]]:
     """用丙酮清洗固体"""
-    vessel_display = get_vessel_display_info(vessel)
-    debug_print(f"💨 丙酮洗固体: {vessel_display} ({repeats} 次)")
     return generate_wash_solid_protocol(G, vessel, "acetone", volume=volume, repeats=repeats)
 
-def wash_with_ether(G: nx.DiGraph, vessel: Union[str, dict], 
-                   volume: Union[float, str] = "40", 
+def wash_with_ether(G: nx.DiGraph, vessel: Union[str, dict],
+                   volume: Union[float, str] = "40",
                    repeats: int = 2) -> List[Dict[str, Any]]:
     """用乙醚清洗固体"""
-    vessel_display = get_vessel_display_info(vessel)
-    debug_print(f"🌬️ 乙醚洗固体: {vessel_display} ({repeats} 次)")
     return generate_wash_solid_protocol(G, vessel, "diethyl_ether", volume=volume, repeats=repeats)
 
-def wash_with_cold_solvent(G: nx.DiGraph, vessel: Union[str, dict], 
-                          solvent: str, volume: Union[float, str] = "30", 
+def wash_with_cold_solvent(G: nx.DiGraph, vessel: Union[str, dict],
+                          solvent: str, volume: Union[float, str] = "30",
                           repeats: int = 1) -> List[Dict[str, Any]]:
     """用冷溶剂清洗固体"""
-    vessel_display = get_vessel_display_info(vessel)
-    debug_print(f"❄️ 冷{solvent}洗固体: {vessel_display} ({repeats} 次)")
-    return generate_wash_solid_protocol(G, vessel, solvent, volume=volume, 
+    return generate_wash_solid_protocol(G, vessel, solvent, volume=volume,
                                       temp=5.0, repeats=repeats)
 
-def wash_with_hot_solvent(G: nx.DiGraph, vessel: Union[str, dict], 
-                         solvent: str, volume: Union[float, str] = "50", 
+def wash_with_hot_solvent(G: nx.DiGraph, vessel: Union[str, dict],
+                         solvent: str, volume: Union[float, str] = "50",
                          repeats: int = 1) -> List[Dict[str, Any]]:
     """用热溶剂清洗固体"""
-    vessel_display = get_vessel_display_info(vessel)
-    debug_print(f"🔥 热{solvent}洗固体: {vessel_display} ({repeats} 次)")
-    return generate_wash_solid_protocol(G, vessel, solvent, volume=volume, 
+    return generate_wash_solid_protocol(G, vessel, solvent, volume=volume,
                                       temp=60.0, repeats=repeats)
 
-def wash_with_stirring(G: nx.DiGraph, vessel: Union[str, dict], 
-                      solvent: str, volume: Union[float, str] = "50", 
-                      stir_time: Union[str, float] = "5 min", 
+def wash_with_stirring(G: nx.DiGraph, vessel: Union[str, dict],
+                      solvent: str, volume: Union[float, str] = "50",
+                      stir_time: Union[str, float] = "5 min",
                       repeats: int = 1) -> List[Dict[str, Any]]:
     """带搅拌的溶剂清洗"""
-    vessel_display = get_vessel_display_info(vessel)
-    debug_print(f"🌪️ 搅拌清洗: {vessel_display} with {solvent} ({repeats} 次)")
-    return generate_wash_solid_protocol(G, vessel, solvent, volume=volume, 
-                                      stir=True, stir_speed=200.0, 
+    return generate_wash_solid_protocol(G, vessel, solvent, volume=volume,
+                                      stir=True, stir_speed=200.0,
                                       time=stir_time, repeats=repeats)
 
-def thorough_wash(G: nx.DiGraph, vessel: Union[str, dict], 
+def thorough_wash(G: nx.DiGraph, vessel: Union[str, dict],
                  solvent: str, volume: Union[float, str] = "50") -> List[Dict[str, Any]]:
     """彻底清洗（多次重复）"""
-    vessel_display = get_vessel_display_info(vessel)
-    debug_print(f"🔄 彻底清洗: {vessel_display} with {solvent} (5 次)")
     return generate_wash_solid_protocol(G, vessel, solvent, volume=volume, repeats=5)
 
-def quick_rinse(G: nx.DiGraph, vessel: Union[str, dict], 
+def quick_rinse(G: nx.DiGraph, vessel: Union[str, dict],
                solvent: str, volume: Union[float, str] = "20") -> List[Dict[str, Any]]:
     """快速冲洗（单次，小体积）"""
-    vessel_display = get_vessel_display_info(vessel)
-    debug_print(f"⚡ 快速冲洗: {vessel_display} with {solvent}")
     return generate_wash_solid_protocol(G, vessel, solvent, volume=volume, repeats=1)
 
-def sequential_wash(G: nx.DiGraph, vessel: Union[str, dict], 
+def sequential_wash(G: nx.DiGraph, vessel: Union[str, dict],
                    solvents: list, volume: Union[float, str] = "40") -> List[Dict[str, Any]]:
     """连续多溶剂清洗"""
-    vessel_display = get_vessel_display_info(vessel)
-    debug_print(f"📝 连续清洗: {vessel_display} with {' → '.join(solvents)}")
-    
     action_sequence = []
     for solvent in solvents:
-        wash_actions = generate_wash_solid_protocol(G, vessel, solvent, 
+        wash_actions = generate_wash_solid_protocol(G, vessel, solvent,
                                                    volume=volume, repeats=1)
         action_sequence.extend(wash_actions)
-    
+
     return action_sequence
 
 # 测试函数
 def test_wash_solid_protocol():
     """测试固体清洗协议"""
-    debug_print("🧪 === WASH SOLID PROTOCOL 测试 === ✨")
-    
-    # 测试vessel参数处理
-    debug_print("🔧 测试vessel参数处理...")
-    
-    # 测试字典格式
-    vessel_dict = {"id": "filter_flask_1", "name": "过滤瓶1", 
+    debug_print("=== WASH SOLID PROTOCOL 测试 ===")
+
+    vessel_dict = {"id": "filter_flask_1", "name": "过滤瓶1",
                   "data": {"liquid_volume": 25.0}}
     vessel_id = extract_vessel_id(vessel_dict)
     vessel_display = get_vessel_display_info(vessel_dict)
-    volume = get_vessel_liquid_volume(vessel_dict)
-    debug_print(f"  字典格式: {vessel_dict}")
-    debug_print(f"    → ID: {vessel_id}, 显示: {vessel_display}, 体积: {volume}mL")
-    
-    # 测试字符串格式
+    volume = get_resource_liquid_volume(vessel_dict)
+    debug_print(f"字典格式: ID={vessel_id}, 显示={vessel_display}, 体积={volume}mL")
+
     vessel_str = "filter_flask_2"
     vessel_id = extract_vessel_id(vessel_str)
     vessel_display = get_vessel_display_info(vessel_str)
-    debug_print(f"  字符串格式: {vessel_str}")
-    debug_print(f"    → ID: {vessel_id}, 显示: {vessel_display}")
-    
-    debug_print("✅ 测试完成 🎉")
+    debug_print(f"字符串格式: ID={vessel_id}, 显示={vessel_display}")
+
+    debug_print("测试完成")
 
 if __name__ == "__main__":
-    test_wash_solid_protocol()
+    test_wash_solid_protocol()

unilabos/config/config.py

@@ -46,7 +46,7 @@ class WSConfig:
 
 # HTTP配置
 class HTTPConfig:
-    remote_addr = "https://leap-lab.bohrium.com/api/v1"
+    remote_addr = "https://uni-lab.bohrium.com/api/v1"
 
 
 # ROS配置

unilabos/devices/neware_battery_test_system/OSS_UPLOAD_README_CN.md

@@ -219,10 +219,10 @@ device = NewareBatteryTestSystem(
 
 #### 步骤 2：提交测试任务
 
-使用 `submit_from_csv_export_ndax` 提交测试任务：
+使用 `submit_from_csv` 提交测试任务：
 
 ```python
-result = device.submit_from_csv_export_ndax(
+result = device.submit_from_csv(
     csv_path="test_data.csv",
     output_dir="D:/neware_output"
 )
@@ -489,7 +489,7 @@ A: 重新获取新的 Token 并更新环境变量 `UNI_LAB_AUTH_TOKEN`。
 **Q: 可以自定义上传路径吗？**  
 A: 当前版本路径由统一 API 自动分配，`oss_prefix` 参数暂不使用（保留接口兼容性）。
 
-**Q: 为什么不在 `submit_from_csv_export_ndax` 中自动上传？**  
+**Q: 为什么不在 `submit_from_csv` 中自动上传？**  
 A: 因为备份文件在测试进行中逐步生成，方法返回时可能文件尚未完全生成，因此提供独立的上传方法更灵活。
 
 **Q: 上传后如何访问文件？**  

unilabos/devices/neware_battery_test_system/OSS_UPLOAD_README_EN.md

@@ -230,10 +230,10 @@ device = NewareBatteryTestSystem(
 
 #### Step 2: Submit Test Tasks
 
-Use `submit_from_csv_export_ndax` to submit test tasks:
+Use `submit_from_csv` to submit test tasks:
 
 ```python
-result = device.submit_from_csv_export_ndax(
+result = device.submit_from_csv(
     csv_path="test_data.csv",
     output_dir="D:/neware_output"
 )
@@ -500,7 +500,7 @@ A: Obtain a new API Key and update the `UNI_LAB_AUTH_TOKEN` environment variable
 **Q: Can I customize upload paths?**  
 A: Current version has paths automatically assigned by unified API. `oss_prefix` parameter is currently unused (retained for interface compatibility).
 
-**Q: Why not auto-upload in `submit_from_csv_export_ndax`?**  
+**Q: Why not auto-upload in `submit_from_csv`?**  
 A: Because backup files are generated progressively during testing, they may not be fully generated when the method returns. A separate upload method provides more flexibility.
 
 **Q: How to access files after upload?**  

unilabos/devices/neware_battery_test_system/device.json

@@ -14,7 +14,7 @@
             "config": {
                 "ip": "127.0.0.1",
                 "port": 502,
-                "machine_ids": [1, 2, 3, 4, 5, 6, 86],
+                "machine_id": 1,
                 "devtype": "27",
                 "timeout": 20,
                 "size_x": 500.0,
@@ -26,10 +26,10 @@
             "data": {
                 "功能说明": "新威电池测试系统，提供720通道监控和CSV批量提交功能",
                 "监控功能": "支持720个通道的实时状态监控、2盘电池物料管理、状态导出等",
-                "提交功能": "通过submit_from_csv action从CSV文件批量提交测试任务（NDA备份），或通过submit_from_csv_export_excel action提交并备份为Excel格式。CSV必须包含: Battery_Code, Pole_Weight, 集流体质量, 活性物质含量, 克容量mah/g, 电池体系, 设备号, 排号, 通道号"
+                "提交功能": "通过submit_from_csv action从CSV文件批量提交测试任务。CSV必须包含: Battery_Code, Pole_Weight, 集流体质量, 活性物质含量, 克容量mah/g, 电池体系, 设备号, 排号, 通道号"
             },
             "children": []
         }
     ],
     "links": []
-}
+}

unilabos/devices/neware_battery_test_system/neware_driver.py

@@ -1,56 +0,0 @@
-import socket
-END_MARKS = [b"\r\n#\r\n", b"</bts>"]  # 读到任一标志即可判定完整响应
-
-def build_start_command(devid, subdevid, chlid, CoinID,
-                        ip_in_xml="127.0.0.1",
-                        devtype:int=27,
-                        recipe_path:str=f"D:\\HHM_test\\A001.xml",
-                        backup_dir:str=f"D:\\HHM_test\\backup",
-                        filetype:int=1) -> str:
-    """
-    filetype: 备份文件类型。0=NDA（新威原生），1=Excel。默认 1。
-    """
-    lines = [
-        '<?xml version="1.0" encoding="UTF-8"?>',
-        '<bts version="1.0">',
-        '  <cmd>start</cmd>',
-        '  <list count="1">',
-        f'    <start ip="{ip_in_xml}" devtype="{devtype}" devid="{devid}" subdevid="{subdevid}" chlid="{chlid}" barcode="{CoinID}">{recipe_path}</start>',
-        f'    <backup backupdir="{backup_dir}" remotedir="" filenametype="1" customfilename="" createdirbydate="0" filetype="{int(filetype)}" backupontime="1" backupontimeinterval="1" backupfree="0" />',
-        '  </list>',
-        '</bts>',
-    ]
-    # TCP 模式：请求必须以 #\r\n 结束（协议要求）
-    return "\r\n".join(lines) + "\r\n#\r\n"
-
-def recv_until_marks(sock: socket.socket, timeout=60):
-    sock.settimeout(timeout)  # 上限给足，协议允许到 30s:contentReference[oaicite:2]{index=2}
-    buf = bytearray()
-    while True:
-        chunk = sock.recv(8192)
-        if not chunk:
-            break
-        buf += chunk
-        # 读到结束标志就停，避免等对端断开
-        for m in END_MARKS:
-            if m in buf:
-                return bytes(buf)
-        # 保险：读到完整 XML 结束标签也停
-        if b"</bts>" in buf:
-            return bytes(buf)
-    return bytes(buf)
-
-def start_test(ip="127.0.0.1", port=502, devid=3, subdevid=2, chlid=1, CoinID="A001", recipe_path=f"D:\\HHM_test\\A001.xml", backup_dir=f"D:\\HHM_test\\backup", filetype:int=1):
-    """
-    filetype: 备份文件类型，0=NDA，1=Excel。默认 1。
-    """
-    xml_cmd = build_start_command(devid=devid, subdevid=subdevid, chlid=chlid, CoinID=CoinID, recipe_path=recipe_path, backup_dir=backup_dir, filetype=filetype)
-    #print(xml_cmd)
-    with socket.create_connection((ip, port), timeout=60) as s:
-        s.sendall(xml_cmd.encode("utf-8"))
-        data = recv_until_marks(s, timeout=60)
-    return data.decode("utf-8", errors="replace")
-
-if __name__ == "__main__":
-    resp = start_test(ip="127.0.0.1", port=502, devid=4, subdevid=10, chlid=1, CoinID="A001", recipe_path=f"D:\\HHM_test\\A001.xml", backup_dir=f"D:\\HHM_test\\backup")
-    print(resp)

unilabos/devices/transport/agv_workstation.py

@@ -0,0 +1,127 @@
+"""
+AGV 通用转运工站 Driver
+
+继承 WorkstationBase，通过 WorkstationNodeCreator 自动获得 ROS2WorkstationNode 能力。
+Warehouse 作为 children 中的资源节点，由 attach_resource() 自动注册到 resource_tracker。
+deck=None，不使用 PLR Deck 抽象。
+"""
+
+from typing import Any, Dict, List, Optional
+
+from pylabrobot.resources import Deck
+
+from unilabos.devices.workstation.workstation_base import WorkstationBase
+from unilabos.resources.warehouse import WareHouse
+from unilabos.utils import logger
+
+
+class AGVTransportStation(WorkstationBase):
+    """通用 AGV 转运工站
+
+    初始化链路（零框架改动）：
+        ROS2DeviceNode.__init__():
+          issubclass(AGVTransportStation, WorkstationBase) → True
+          → WorkstationNodeCreator.create_instance(data):
+              data["deck"] = None
+              → DeviceClassCreator.create_instance(data) → AGVTransportStation(deck=None, ...)
+              → attach_resource(): children 中 type="warehouse" → resource_tracker.add_resource(wh)
+          → ROS2WorkstationNode(protocol_type=[...], children=[nav, arm], ...)
+          → driver.post_init(ros_node):
+              self.carrier 从 resource_tracker 中获取 WareHouse
+    """
+
+    def __init__(
+        self,
+        deck: Optional[Deck] = None,
+        children: Optional[List[Any]] = None,
+        route_table: Optional[Dict[str, Dict[str, str]]] = None,
+        device_roles: Optional[Dict[str, str]] = None,
+        **kwargs,
+    ):
+        super().__init__(deck=None, **kwargs)
+        self.route_table: Dict[str, Dict[str, str]] = route_table or {}
+        self.device_roles: Dict[str, str] = device_roles or {}
+
+    # ============ 载具 (Warehouse) ============
+
+    @property
+    def carrier(self) -> Optional[WareHouse]:
+        """从 resource_tracker 中找到 AGV 载具 Warehouse"""
+        if not hasattr(self, "_ros_node"):
+            return None
+        for res in self._ros_node.resource_tracker.resources:
+            if isinstance(res, WareHouse):
+                return res
+        return None
+
+    @property
+    def capacity(self) -> int:
+        """AGV 载具总容量（slot 数）"""
+        wh = self.carrier
+        if wh is None:
+            return 0
+        return wh.num_items_x * wh.num_items_y * wh.num_items_z
+
+    @property
+    def free_slots(self) -> List[str]:
+        """返回当前空闲 slot 名称列表"""
+        wh = self.carrier
+        if wh is None:
+            return []
+        ordering = getattr(wh, "_ordering", {})
+        return [name for name, site in ordering.items() if site.resource is None]
+
+    @property
+    def occupied_slots(self) -> Dict[str, Any]:
+        """返回已占用的 slot → Resource 映射"""
+        wh = self.carrier
+        if wh is None:
+            return {}
+        ordering = getattr(wh, "_ordering", {})
+        return {name: site.resource for name, site in ordering.items() if site.resource is not None}
+
+    # ============ 路由查询 ============
+
+    def resolve_route(self, from_station: str, to_station: str) -> Dict[str, str]:
+        """查询路由表，返回导航和机械臂指令
+
+        Args:
+            from_station: 来源工站 ID
+            to_station: 目标工站 ID
+
+        Returns:
+            {"nav_command": "...", "arm_pick": "...", "arm_place": "..."}
+
+        Raises:
+            KeyError: 路由表中未找到对应路线
+        """
+        route_key = f"{from_station}->{to_station}"
+        if route_key not in self.route_table:
+            raise KeyError(f"路由表中未找到路线: {route_key}")
+        return self.route_table[route_key]
+
+    def get_device_id(self, role: str) -> str:
+        """获取子设备 ID
+
+        Args:
+            role: 设备角色，如 "navigator", "arm"
+
+        Returns:
+            设备 ID 字符串
+
+        Raises:
+            KeyError: 未配置该角色的设备
+        """
+        if role not in self.device_roles:
+            raise KeyError(f"未配置设备角色: {role}，当前已配置: {list(self.device_roles.keys())}")
+        return self.device_roles[role]
+
+    # ============ 生命周期 ============
+
+    def post_init(self, ros_node) -> None:
+        super().post_init(ros_node)
+        wh = self.carrier
+        if wh is not None:
+            logger.info(f"AGV {ros_node.device_id} 载具已就绪: {wh.name}, 容量={self.capacity}")
+        else:
+            logger.warning(f"AGV {ros_node.device_id} 未发现 Warehouse 载具资源")

unilabos/devices/virtual/workbench.py

@@ -22,11 +22,10 @@ from threading import Lock, RLock
 from typing_extensions import TypedDict
 
 from unilabos.registry.decorators import (
-    device, action, ActionInputHandle, ActionOutputHandle, DataSource, topic_config, not_action, NodeType
+    device, action, ActionInputHandle, ActionOutputHandle, DataSource, topic_config, not_action
 )
-from unilabos.registry.placeholder_type import ResourceSlot, DeviceSlot
-from unilabos.ros.nodes.base_device_node import BaseROS2DeviceNode, ROS2DeviceNode
-from unilabos.resources.resource_tracker import SampleUUIDsType, LabSample, ResourceTreeSet
+from unilabos.ros.nodes.base_device_node import BaseROS2DeviceNode
+from unilabos.resources.resource_tracker import SampleUUIDsType, LabSample
 
 
 # ============ TypedDict 返回类型定义 ============
@@ -291,126 +290,6 @@ class VirtualWorkbench:
         self._update_data_status(f"机械臂已释放 (完成: {task})")
         self.logger.info(f"机械臂已释放 (完成: {task})")
 
-    @action(
-        always_free=True, node_type=NodeType.MANUAL_CONFIRM, placeholder_keys={
-            "assignee_user_ids": "unilabos_manual_confirm"
-        }, goal_default={
-            "timeout_seconds": 3600,
-            "assignee_user_ids": []
-        }, feedback_interval=300,
-        handles=[
-            ActionInputHandle(key="target_device", data_type="device_id",
-                              label="目标设备", data_key="target_device", data_source=DataSource.HANDLE),
-            ActionInputHandle(key="resource", data_type="resource",
-                              label="待转移资源", data_key="resource", data_source=DataSource.HANDLE),
-            ActionInputHandle(key="mount_resource", data_type="resource",
-                              label="目标孔位", data_key="mount_resource", data_source=DataSource.HANDLE),
-
-            ActionInputHandle(key="collector_mass", data_type="collector_mass",
-                              label="极流体质量", data_key="collector_mass", data_source=DataSource.HANDLE),
-            ActionInputHandle(key="active_material", data_type="active_material",
-                              label="活性物质含量", data_key="active_material", data_source=DataSource.HANDLE),
-            ActionInputHandle(key="capacity", data_type="capacity",
-                              label="克容量", data_key="capacity", data_source=DataSource.HANDLE),
-            ActionInputHandle(key="battery_system", data_type="battery_system",
-                              label="电池体系", data_key="battery_system", data_source=DataSource.HANDLE),
-            # transfer使用
-            ActionOutputHandle(key="target_device", data_type="device_id",
-                               label="目标设备", data_key="target_device", data_source=DataSource.EXECUTOR),
-            ActionOutputHandle(key="resource", data_type="resource",
-                              label="待转移资源", data_key="resource.@flatten", data_source=DataSource.EXECUTOR),
-            ActionOutputHandle(key="mount_resource", data_type="resource",
-                              label="目标孔位", data_key="mount_resource.@flatten", data_source=DataSource.EXECUTOR),
-            # test使用
-            ActionOutputHandle(key="collector_mass", data_type="collector_mass",
-                              label="极流体质量", data_key="collector_mass", data_source=DataSource.EXECUTOR),
-            ActionOutputHandle(key="active_material", data_type="active_material",
-                              label="活性物质含量", data_key="active_material", data_source=DataSource.EXECUTOR),
-            ActionOutputHandle(key="capacity", data_type="capacity",
-                              label="克容量", data_key="capacity", data_source=DataSource.EXECUTOR),
-            ActionOutputHandle(key="battery_system", data_type="battery_system",
-                              label="电池体系", data_key="battery_system", data_source=DataSource.EXECUTOR),
-        ]
-    )
-    def manual_confirm(
-        self,
-        resource: List[ResourceSlot],
-        target_device: DeviceSlot,
-        mount_resource: List[ResourceSlot],
-        collector_mass: List[float],
-        active_material: List[float],
-        capacity: List[float],
-        battery_system: List[str],
-        timeout_seconds: int,
-        assignee_user_ids: list[str],
-        **kwargs
-    ) -> dict:
-        """
-        timeout_seconds: 超时时间（秒），默认3600秒
-        collector_mass: 极流体质量
-        active_material: 活性物质含量
-        capacity: 克容量（mAh/g）
-        battery_system: 电池体系
-        修改的结果无效，是只读的
-        """
-        resource = ResourceTreeSet.from_plr_resources(resource).dump()
-        mount_resource = ResourceTreeSet.from_plr_resources(mount_resource).dump()
-        kwargs.update(locals())
-        kwargs.pop("kwargs")
-        kwargs.pop("self")
-        return kwargs
-
-    @action(
-        description="转移物料",
-        handles=[
-            ActionInputHandle(key="target_device", data_type="device_id",
-                              label="目标设备", data_key="target_device", data_source=DataSource.HANDLE),
-            ActionInputHandle(key="resource", data_type="resource",
-                               label="待转移资源", data_key="resource", data_source=DataSource.HANDLE),
-            ActionInputHandle(key="mount_resource", data_type="resource",
-                               label="目标孔位", data_key="mount_resource", data_source=DataSource.HANDLE),
-        ]
-    )
-    async def transfer(self, resource: List[ResourceSlot], target_device: DeviceSlot, mount_resource: List[ResourceSlot]):
-        future = ROS2DeviceNode.run_async_func(self._ros_node.transfer_resource_to_another, True,
-            **{
-                "plr_resources": resource,
-                "target_device_id": target_device,
-                "target_resources": mount_resource,
-                "sites": [None] * len(mount_resource),
-            })
-        result = await future
-        return result
-
-
-    @action(
-        description="扣电测试启动",
-        handles=[
-            ActionInputHandle(key="resource", data_type="resource",
-                              label="待转移资源", data_key="resource", data_source=DataSource.HANDLE),
-            ActionInputHandle(key="mount_resource", data_type="resource",
-                              label="目标孔位", data_key="mount_resource", data_source=DataSource.HANDLE),
-
-            ActionInputHandle(key="collector_mass", data_type="collector_mass",
-                              label="极流体质量", data_key="collector_mass", data_source=DataSource.HANDLE),
-            ActionInputHandle(key="active_material", data_type="active_material",
-                              label="活性物质含量", data_key="active_material", data_source=DataSource.HANDLE),
-            ActionInputHandle(key="capacity", data_type="capacity",
-                              label="克容量", data_key="capacity", data_source=DataSource.HANDLE),
-            ActionInputHandle(key="battery_system", data_type="battery_system",
-                              label="电池体系", data_key="battery_system", data_source=DataSource.HANDLE),
-        ]
-    )
-    async def test(
-        self, resource: List[ResourceSlot], mount_resource: List[ResourceSlot],  collector_mass: List[float], active_material: List[float], capacity: List[float], battery_system: list[str]
-    ):
-        print(resource)
-        print(mount_resource)
-        print(collector_mass)
-        print(active_material)
-        print(capacity)
-        print(battery_system)
-
     @action(
         auto_prefix=True,
         description="批量准备物料 - 虚拟起始节点, 生成A1-A5物料, 输出5个handle供后续节点使用",

unilabos/devices/workstation/bioyond_studio/station.py

@@ -258,7 +258,7 @@ class BioyondResourceSynchronizer(ResourceSynchronizer):
                 logger.info(f"[同步→Bioyond] ➕ 物料不存在于 Bioyond，将创建新物料并入库")
 
             # 第1步：从配置中获取仓库配置
-            warehouse_mapping = self.workstation.bioyond_config.get("warehouse_mapping", {})
+            warehouse_mapping = self.bioyond_config.get("warehouse_mapping", {})
 
             # 确定目标仓库名称
             parent_name = None
@@ -760,9 +760,10 @@ class BioyondWorkstation(WorkstationBase):
                         except:
                             pass
 
-        # 创建通信模块；同步器将在 post_init 中初始化并执行首次同步
+        # 创建通信模块
         self._create_communication_module(bioyond_config)
-        self.resource_synchronizer = None
+        self.resource_synchronizer = BioyondResourceSynchronizer(self)
+        self.resource_synchronizer.sync_from_external()
 
         # TODO: self._ros_node里面拿属性
 
@@ -801,15 +802,6 @@ class BioyondWorkstation(WorkstationBase):
     def post_init(self, ros_node: ROS2WorkstationNode):
         self._ros_node = ros_node
 
-        # Deck 为空时（反序列化未恢复子节点），主动调用 setup() 初始化仓库
-        if self.deck and not self.deck.children and hasattr(self.deck, "setup") and callable(self.deck.setup):
-            logger.info("Deck 无仓库子节点，调用 setup() 初始化仓库")
-            self.deck.setup()
-
-        # 初始化同步器并执行首次同步（需在仓库初始化之后）
-        self.resource_synchronizer = BioyondResourceSynchronizer(self)
-        self.resource_synchronizer.sync_from_external()
-
         # 启动连接监控
         try:
             self.connection_monitor = ConnectionMonitor(self)

unilabos/devices/workstation/changelog_2026-03-12.md

@@ -1,219 +0,0 @@
-# 代码变更说明 — 2026-03-12
-
-> 本次变更基于 `implementation_plan_v2.md` 执行，目标：**物理几何结构初始化与物料内容物填充彻底解耦**，消除 PLR 反序列化时的 `Resource already assigned to deck` 错误，并修复若干运行时新增问题。
-
----
-
-## 一、物料系统标准化重构（主线任务）
-
-### 1. `unilabos/resources/battery/magazine.py`
-
-**改动**：`MagazineHolder_6_Cathode`、`MagazineHolder_6_Anode`、`MagazineHolder_4_Cathode` 三个工厂函数的 `klasses` 参数改为 `None`。
-
-**原因**：原来三个工厂函数在初始化时就向洞位填满极片对象（`ElectrodeSheet`），导致 PLR 反序列化时"几何结构已创建子节点 + DB 再次 assign"双重冲突。
-
-**原则**：物料余量改由寄存器直读（阶段 F），资源树不再追踪每个极片实体。`MagazineHolder_6_Battery` 原本就是 `klasses=None`，三者现在保持一致。
-
----
-
-### 2. `unilabos/resources/battery/magazine.py`（追加，响应重复 UUID 问题）
-
-**改动**：为 `Magazine`（洞位类）新增 `serialize` 和 `deserialize` 重写：
-- `serialize`：序列化时强制将 `children` 置空，不再把极片写回数据库。
-- `deserialize`：反序列化时强制忽略 `children` 字段，阻止数据库中旧极片记录被恢复。
-
-**原因**：数据库中遗留有旧的 `ElectrodeSheet` 记录（`A1_sheet100` 等），启动时被 PLR 反序列化进来，导致同一 UUID 出现在多个 Magazine 洞位中，触发 `发现重复的uuid` 错误。此修复从源头截断旧数据，经过一次完整的"启动 → 资源树写回"后，数据库旧极片记录也会被干净覆盖。
-
----
-
-### 3. `unilabos/resources/battery/bottle_carriers.py`
-
-**改动**：删除 `YIHUA_Electrolyte_12VialCarrier` 末尾的 12 瓶填充循环及对应 `import`。
-
-**原因**：`bottle_rack_6x2` 和 `bottle_rack_6x2_2` 应初始化为空载架，瓶子由 Bioyond 侧实际转运后再填入。原来初始化时直接塞满 `YB_pei_ye_xiao_Bottle`，反序列化时产生重复 assign。
-
----
-
-### 4. `unilabos/resources/bioyond/decks.py`
-
-**改动**：
-- 将 `BIOYOND_YB_Deck` 重命名为 `BioyondElectrolyteDeck`，保留 `BIOYOND_YB_Deck` 作为向后兼容别名。
-- 工厂函数 `YB_Deck()` 重命名为 `bioyond_electrolyte_deck()`，保留 `YB_Deck` 作为别名。
-- `BIOYOND_PolymerReactionStation_Deck`、`BIOYOND_PolymerPreparationStation_Deck`、`BioyondElectrolyteDeck` 三个 Deck 类：
-  - 移除 `__init__` 中的 `setup: bool = False` 参数及 `if setup: self.setup()` 调用。
-  - 删除临时 `deserialize` 补丁（该补丁是为了强制 `setup=False`，根本原因消除后不再需要）。
-
-**原因**：`setup` 参数导致 PLR 反序列化时先通过 `__init__` 创建所有子资源，再从 JSON `children` 字段再次 assign，产生 `already assigned to deck` 错误。正确模式：`__init__` 只初始化自身几何，`setup()` 由工厂函数调用，反序列化由 PLR 从 DB 数据重建子资源。
-
----
-
-### 5. `unilabos/devices/workstation/coin_cell_assembly/YB_YH_materials.py`
-
-**改动**：
-- `CoincellDeck` 重命名为 `YihuaCoinCellDeck`，保留 `CoincellDeck` 作为向后兼容别名。
-- 工厂函数 `YH_Deck()` 重命名为 `yihua_coin_cell_deck()`，保留 `YH_Deck` 作为别名。
-- 移除 `YihuaCoinCellDeck.__init__` 中的 `setup: bool = False` 参数及调用，删除 `deserialize` 补丁（原因同 decks.py）。
-- `MaterialPlate.__init__` 移除 `fill` 参数和 `fill=True` 分支，新增类方法 `MaterialPlate.create_with_holes()` 作为"带洞位"的工厂方法，`setup()` 改为调用该工厂方法。
-- `YihuaCoinCellDeck.setup()` 末尾新增 `electrolyte_buffer`（`ResourceStack`）接驳槽，用于接收来自 Bioyond 侧的分液瓶板，命名与 `bioyond_cell_workstation.py` 中 `sites=["electrolyte_buffer"]` 一致。
-
----
-
-### 6. `unilabos/resources/resource_tracker.py`
-
-**改动 1**：`to_plr_resources` 中，`load_all_state` 调用前预填 `Container` 类资源缺失的键：
-
-```python
-state.setdefault("liquid_history", [])
-state.setdefault("pending_liquids", {})
-```
-
-**原因**：新版 PLR 要求 `Container` 状态中必须包含这两个键，旧数据库记录缺失时 `load_all_state` 会抛出 `KeyError`。
-
-**改动 2**：`_validate_tree` 中，遇到重复 UUID 时改为自动重新分配新 UUID 并打 `WARNING`，不再直接抛异常崩溃。
-
-**原因**：旧数据库中存在多个同名同 UUID 的极片对象（历史脏数据），严格校验会导致节点无法启动。改为 WARNING + 自动修复，确保启动成功，下次资源树写回后脏数据自然清除。
-
----
-
-### 7. `unilabos/resources/itemized_carrier.py`
-
-**改动**：将原来的 `idx is None` 兜底补丁（静默调用 `super().assign_child_resource`，不更新槽位追踪）替换为两段式逻辑：
-
-1. **XY 近似匹配**（容差 2mm）：精确三维坐标匹配失败时，仅对比 XY 二维坐标，找到最近槽位后用槽位的正确坐标（含 Z）完成 assign，并打 `WARNING`。
-2. **XY 也失败才抛异常**：给出详细的槽位列表和传入坐标，便于问题排查。
-
-**原因**：数据库中存储的资源坐标 Z=0，而 `warehouse_factory` 定义的槽位 Z=dz（如 10mm）。精确匹配永远失败，原补丁静默兜底掩盖了这一问题。近似匹配修复了 Z 偏移，同时保留了真正异常时的报错能力。
-
----
-
-### 8. `unilabos/devices/workstation/bioyond_studio/bioyond_cell/bioyond_cell_workstation.py`
-
-**改动 1**：更新导入：`BIOYOND_YB_Deck` → `BioyondElectrolyteDeck, bioyond_electrolyte_deck`。
-
-**改动 2**：`__main__` 入口处改为调用 `bioyond_electrolyte_deck(name="YB_Deck")`。
-
-**改动 3**：新增 `_get_resource_from_device(device_id, resource_name)` 方法，用于从目标设备的资源树中动态查找 PLR 资源对象（带降级回退逻辑）。
-
-**改动 4**：跨站转运逻辑中，将原来"创建 `size=1,1,1` 的虚拟 `ResourcePLR` + 硬编码 UUID"的方式，改为通过 `_get_resource_from_device` 从目标设备获取真实的 `electrolyte_buffer` 资源对象。
-
-**原因**：原代码使用硬编码 UUID 的虚拟资源作为转运目标，该对象在 YihuaCoinCellDeck 的资源树中不存在，转移后资源树状态混乱。
-
----
-
-### 9. `unilabos/devices/workstation/coin_cell_assembly/coin_cell_assembly.py`
-
-**改动 1**：更新导入：`CoincellDeck` → `YihuaCoinCellDeck, yihua_coin_cell_deck`，`__main__` 入口改为调用 `yihua_coin_cell_deck()`。
-
-**改动 2**：新增 10 个 `@property`，实现对依华扣电工站 Modbus 寄存器的直读：
-
-| 属性名 | 寄存器地址 | 说明 |
-|---|---|---|
-| `data_10mm_positive_plate_remaining` | 520 | 10mm正极片余量 |
-| `data_12mm_positive_plate_remaining` | 522 | 12mm正极片余量 |
-| `data_16mm_positive_plate_remaining` | 524 | 16mm正极片余量 |
-| `data_aluminum_foil_remaining` | 526 | 铝箔余量 |
-| `data_positive_shell_remaining` | 528 | 正极壳余量 |
-| `data_flat_washer_remaining` | 530 | 平垫余量 |
-| `data_negative_shell_remaining` | 532 | 负极壳余量 |
-| `data_spring_washer_remaining` | 534 | 弹垫余量 |
-| `data_finished_battery_remaining_capacity` | 536 | 成品电池余量 |
-| `data_finished_battery_ng_remaining_capacity` | 538 | 成品电池NG槽余量 |
-
-**原因**：`coin_cell_workstation.yaml` 的 `status_types` 中定义了这 10 个属性，但代码中从未实现，导致每次前端轮询时均报 `AttributeError`。
-
----
-
-## 二、配置与注册表更新
-
-### 10. `yibin_electrolyte_config.json`
-- `BIOYOND_YB_Deck` → `BioyondElectrolyteDeck`（class、type、_resource_type 三处）
-- `CoincellDeck` → `YihuaCoinCellDeck`（class、type、_resource_type 三处）
-- 移除 `"setup": true` 字段
-
-### 11. `yibin_coin_cell_only_config.json`
-- `CoincellDeck` → `YihuaCoinCellDeck`
-- 移除 `"setup": true`
-
-### 12. `yibin_electrolyte_only_config.json`
-- `BIOYOND_YB_Deck` → `BioyondElectrolyteDeck`
-- 移除 `"setup": true`
-
-### 13. `unilabos/registry/resources/bioyond/deck.yaml`
-- `BIOYOND_YB_Deck` → `BioyondElectrolyteDeck`，工厂函数路径更新为 `bioyond_electrolyte_deck`
-- `CoincellDeck` → `YihuaCoinCellDeck`，工厂函数路径更新为 `yihua_coin_cell_deck`
-
----
-
-## 三、独立 Bug 修复
-
-### 14. `unilabos/devices/workstation/coin_cell_assembly/coin_cell_assembly_b.csv`
-
-**改动**：10 条余量寄存器记录的 `DataType` 列从 `REAL` 改为 `FLOAT32`。
-
-**原因**：`REAL` 是 IEC 61131-3 PLC 工程师惯用名称，但 pymodbus 的 `DATATYPE` 枚举只有 `FLOAT32`，`DataType['REAL']` 查表时抛 `KeyError: 'REAL'`，导致 `CoinCellAssemblyWorkstation` 节点启动失败。
-
----
-
-## 四、运行期新增 Bug 修复（第二轮，2026-03-12 18:12 日志）
-
-### 15. `unilabos/devices/workstation/bioyond_studio/station.py`
-
-**改动**：第 261 行 `self.bioyond_config` → `self.workstation.bioyond_config`。
-
-**原因**：`BioyondResourceSynchronizer.sync_to_external` 内部误用了 `self.bioyond_config`，而该类从未设置此属性（应通过 `self.workstation.bioyond_config` 访问）。触发场景：用户在前端将任意物料拖入仓库时，同步到 Bioyond 必定抛出 `AttributeError: 'BioyondResourceSynchronizer' object has no attribute 'bioyond_config'`。
-
----
-
-### 16. `unilabos/devices/workstation/bioyond_studio/bioyond_cell/bioyond_cell_workstation.py`
-
-**改动**：`_get_type_id_by_name` 方法新增"直接英文 key 命中"分支：
-
-- **原逻辑**：仅按 `value[0]`（中文名，如 `"5ml分液瓶板"`）遍历比较。
-- **新逻辑**：先以 `type_name` 直接查找 `material_type_mappings` 字典 key（英文 model 名，如 `"YB_Vial_5mL_Carrier"`），命中则立即返回 UUID；否则再按中文名兜底遍历。
-
-**原因**：`resource_tree_transfer` 将 `plr_resource.model`（英文 key）作为 `board_type` / `bottle_type` 传给 `create_sample`，后者再调用 `_get_type_id_by_name`。旧版函数只按中文名查，导致英文 key 永远匹配不到 → `ValueError: 未找到板类型 'YB_Vial_5mL_Carrier' 的配置`。新函数兼容两种查找方式，同时保持向后兼容。
-
----
-
-## 五、运行期新增 Bug 修复（第三轮，2026-03-12 20:30 日志）
-
-### 17. `unilabos/resources/resource_tracker.py`（追加）
-
-**改动**：在 `to_plr_resources` 中，`sub_cls.deserialize` 调用前新增 `_deduplicate_plr_dict(plr_dict)` 预处理函数。
-
-**函数逻辑**：递归遍历整个 `plr_dict` 树，在**全树范围**对 `children` 列表按 `name` 去重——保留首次出现的同名节点，跳过重复项并打 `WARNING`。
-
-**根本原因**：
-1. 用户通过前端将 `YB_Vial_5mL_Carrier` 拖入仓库 E01，carrier 及其子 vial（`YB_Vial_5mL_Carrier_vial_A1` 等）被写入数据库。
-2. 随后 `sync_from_external`（Bioyond 定期同步）以**新 UUID** 重新创建同名 carrier 并赋给同一槽位，PLR 内存树中的旧 carrier 被替换，但**数据库旧记录未被清除**。
-3. 下次重启时，数据库同一 `WareHouse` 下存在两条同名 `BottleCarrier`（不同 UUID），`node_to_plr_dict` 将二者都放入 `children` 列表，PLR 反序列化第二个 carrier 时子 vial 命名冲突，抛出 `ValueError: Resource with name 'YB_Vial_5mL_Carrier_vial_A1' already exists in the tree.`，整个 deck 无法加载，系统启动失败。
-
-**连锁错误（随根因修复自动消除）**：
-- `TypeError: Deck.__init__() got an unexpected keyword argument 'data'` — deck 加载失败后 `driver_creator.py` 触发降级路径，参数类型错误
-- `AttributeError: 'ResourceDictInstance' object has no attribute 'copy'` — 另一条降级路径失败
-- `ValueError: Deck 配置不能为空` — 所有 deck 创建路径失败，`deck=None` 传入工作站
-
----
-
-> **验证状态**：2026-03-12 20:56 日志确认系统正常运行，无新增 ERROR 级错误。
-
----
-
-## 六、变更文件汇总（最终）
-
-| 文件 | 变更类型 | 轮次 |
-|---|---|---|
-| `resources/battery/magazine.py` | 重构 + Bug 修复（极片子节点解耦 + 旧数据清理） | 第一轮 |
-| `resources/battery/bottle_carriers.py` | 重构（移除初始化时自动填瓶） | 第一轮 |
-| `resources/bioyond/decks.py` | 重构 + 重命名（BioyondElectrolyteDeck） | 第一轮 |
-| `devices/workstation/coin_cell_assembly/YB_YH_materials.py` | 重构 + 重命名（YihuaCoinCellDeck）+ 新增 electrolyte_buffer 槽位 | 第一轮 |
-| `resources/resource_tracker.py` | Bug 修复 × 3（Container 状态键预填 + 重复 UUID 自动修复 + 树级名称去重） | 第一/三轮 |
-| `resources/itemized_carrier.py` | Bug 修复（XY 近似坐标匹配，修复 Z 偏移） | 第一轮 |
-| `devices/workstation/bioyond_studio/bioyond_cell/bioyond_cell_workstation.py` | 重构 + Bug 修复（跨站转运 + 类型映射双模式查找） | 第一/二轮 |
-| `devices/workstation/bioyond_studio/station.py` | Bug 修复（sync_to_external 属性访问路径） | 第二轮 |
-| `devices/workstation/coin_cell_assembly/coin_cell_assembly.py` | 新增 10 个 Modbus 余量属性 + 更新导入 | 第一轮 |
-| `yibin_electrolyte_config.json` | 配置更新（类名 + 移除 setup） | 第一轮 |
-| `yibin_coin_cell_only_config.json` | 配置更新（类名 + 移除 setup） | 第一轮 |
-| `yibin_electrolyte_only_config.json` | 配置更新（类名 + 移除 setup） | 第一轮 |
-| `registry/resources/bioyond/deck.yaml` | 注册表更新（类名 + 工厂函数路径） | 第一轮 |
-| `devices/workstation/coin_cell_assembly/coin_cell_assembly_b.csv` | Bug 修复（REAL → FLOAT32） | 第一轮 |

unilabos/devices/workstation/coin_cell_assembly/YB_YH_materials.py

@@ -130,14 +130,20 @@ class MaterialPlate(ItemizedResource[MaterialHole]):
         ordering: Optional[OrderedDict[str, str]] = None,
         category: str = "material_plate",
         model: Optional[str] = None,
+        fill: bool = False
     ):
-        """初始化料板（不主动填充洞位，由工厂方法或反序列化恢复）
+        """初始化料板
 
         Args:
             name: 料板名称
             size_x: 长度 (mm)
             size_y: 宽度 (mm)
             size_z: 高度 (mm)
+            hole_diameter: 洞直径 (mm)
+            hole_depth: 洞深度 (mm)
+            hole_spacing_x: X方向洞位间距 (mm)
+            hole_spacing_y: Y方向洞位间距 (mm)
+            number: 编号
             category: 类别
             model: 型号
         """
@@ -147,50 +153,42 @@ class MaterialPlate(ItemizedResource[MaterialHole]):
             hole_diameter=20.0,
             info="",
         )
-        super().__init__(
-            name=name,
-            size_x=size_x,
-            size_y=size_y,
-            size_z=size_z,
-            ordered_items=ordered_items,
-            ordering=ordering,
-            category=category,
-            model=model,
-        )
-
-    @classmethod
-    def create_with_holes(
-        cls,
-        name: str,
-        size_x: float,
-        size_y: float,
-        size_z: float,
-        category: str = "material_plate",
-        model: Optional[str] = None,
-    ) -> "MaterialPlate":
-        """工厂方法：创建带 4x4 洞位的料板（仅用于初始 setup，不在反序列化路径调用）"""
-        # 默认洞位间距（与 _unilabos_state 默认值保持一致）
-        hole_spacing_x = 24.0
-        hole_spacing_y = 24.0
-        # 先建洞位，再作为 ordered_items 传入构造函数
-        # （ItemizedResource.__init__ 要求 ordered_items 或 ordering 二选一必须有值）
+        # 创建4x4的洞位
+        # TODO: 这里要改，对应不同形状
         holes = create_ordered_items_2d(
             klass=MaterialHole,
             num_items_x=4,
             num_items_y=4,
-            dx=(size_x - 4 * hole_spacing_x) / 2,
-            dy=(size_y - 4 * hole_spacing_y) / 2,
+            dx=(size_x - 4 * self._unilabos_state["hole_spacing_x"]) / 2,  # 居中
+            dy=(size_y - 4 * self._unilabos_state["hole_spacing_y"]) / 2,  # 居中
             dz=size_z,
-            item_dx=hole_spacing_x,
-            item_dy=hole_spacing_y,
-            size_x=16,
-            size_y=16,
-            size_z=16,
-        )
-        return cls(
-            name=name, size_x=size_x, size_y=size_y, size_z=size_z,
-            ordered_items=holes, category=category, model=model,
+            item_dx=self._unilabos_state["hole_spacing_x"],
+            item_dy=self._unilabos_state["hole_spacing_y"],
+            size_x = 16,
+            size_y = 16,
+            size_z = 16,
         )
+        if fill:
+            super().__init__(
+                name=name,
+                size_x=size_x,
+                size_y=size_y,
+                size_z=size_z,
+                ordered_items=holes,
+                category=category,
+                model=model,
+            )
+        else:
+            super().__init__(
+                name=name,
+                size_x=size_x,
+                size_y=size_y,
+                size_z=size_z,
+                ordered_items=ordered_items,
+                ordering=ordering,
+                category=category,
+                model=model,
+            )
 
     def update_locations(self):
         # TODO:调多次相加
@@ -536,19 +534,30 @@ class WasteTipBox(Trash):
         return data
 
 
-class YihuaCoinCellDeck(Deck):
-    """依华纽扣电池组装工作站台面类"""
+class CoincellDeck(Deck):
+    """纽扣电池组装工作站台面类"""
 
     def __init__(
         self,
         name: str = "coin_cell_deck",
-        size_x: float = 1450.0,
-        size_y: float = 1450.0,
-        size_z: float = 100.0,
+        size_x: float = 1450.0,  # 1m
+        size_y: float = 1450.0,  # 1m
+        size_z: float = 100.0,   # 0.9m
         origin: Coordinate = Coordinate(-2200, 0, 0),
         category: str = "coin_cell_deck",
-        setup: bool = False,
+        setup: bool = False,  # 是否自动执行 setup
     ):
+        """初始化纽扣电池组装工作站台面
+
+        Args:
+            name: 台面名称
+            size_x: 长度 (mm) - 1m
+            size_y: 宽度 (mm) - 1m
+            size_z: 高度 (mm) - 0.9m
+            origin: 原点坐标
+            category: 类别
+            setup: 是否自动执行 setup 配置标准布局
+        """
         super().__init__(
             name=name,
             size_x=1450.0,
@@ -582,11 +591,14 @@ class YihuaCoinCellDeck(Deck):
         # ====================================== 物料板 ============================================
         # 创建物料板（料盘carrier）- 4x4布局
         # 负极料盘
-        fujiliaopan = MaterialPlate.create_with_holes(name="负极料盘", size_x=120, size_y=100, size_z=10.0)
+        fujiliaopan = MaterialPlate(name="负极料盘", size_x=120, size_y=100, size_z=10.0, fill=True)
         self.assign_child_resource(fujiliaopan, Coordinate(x=708.0, y=794.0, z=0))
+        # for i in range(16):
+        #     fujipian = ElectrodeSheet(name=f"{fujiliaopan.name}_jipian_{i}", size_x=12, size_y=12, size_z=0.1)
+        #     fujiliaopan.children[i].assign_child_resource(fujipian, location=None)
 
         # 隔膜料盘
-        gemoliaopan = MaterialPlate.create_with_holes(name="隔膜料盘", size_x=120, size_y=100, size_z=10.0)
+        gemoliaopan = MaterialPlate(name="隔膜料盘", size_x=120, size_y=100, size_z=10.0, fill=True)
         self.assign_child_resource(gemoliaopan, Coordinate(x=718.0, y=918.0, z=0))
         # for i in range(16):
         #     gemopian = ElectrodeSheet(name=f"{gemoliaopan.name}_jipian_{i}", size_x=12, size_y=12, size_z=0.1)
@@ -621,27 +633,11 @@ class YihuaCoinCellDeck(Deck):
         waste_tip_box = WasteTipBox(name="waste_tip_box")
         self.assign_child_resource(waste_tip_box, Coordinate(x=778.0, y=622.0, z=0))
 
-        # 分液瓶板接驳区 - 接收来自 BioyondElectrolyte 侧的完整 Vial Carrier 板
-        # 命名 electrolyte_buffer 与 bioyond_cell_workstation.py 中 sites=["electrolyte_buffer"] 对应
-        electrolyte_buffer = ResourceStack(
-            name="electrolyte_buffer",
-            direction="z",
-            resources=[],
-        )
-        self.assign_child_resource(electrolyte_buffer, Coordinate(x=1050.0, y=700.0, z=0))
 
-
-def yihua_coin_cell_deck(name: str = "coin_cell_deck") -> YihuaCoinCellDeck:
-    deck = YihuaCoinCellDeck(name=name)
-    deck.setup()
-    return deck
-
-
-# 向后兼容别名，日后废弃
-CoincellDeck = YihuaCoinCellDeck
-
-def YH_Deck(name: str = "") -> YihuaCoinCellDeck:
-    return yihua_coin_cell_deck(name=name or "coin_cell_deck")
+def YH_Deck(name=""):
+    cd = CoincellDeck(name=name)
+    cd.setup()
+    return cd
 
 
 if __name__ == "__main__":

unilabos/devices/workstation/coin_cell_assembly/coin_cell_assembly.py

@@ -6,7 +6,7 @@ import threading
 import time
 import types
 from datetime import datetime
-from typing import Any, Dict, List, Optional
+from typing import Any, Dict, Optional
 from functools import wraps
 from pylabrobot.resources import Deck, Resource as PLRResource
 from unilabos_msgs.msg import Resource
@@ -17,7 +17,7 @@ from unilabos.device_comms.modbus_plc.modbus import DeviceType, Base as ModbusNo
 from unilabos.devices.workstation.coin_cell_assembly.YB_YH_materials import *
 from unilabos.ros.nodes.base_device_node import ROS2DeviceNode, BaseROS2DeviceNode
 from unilabos.ros.nodes.presets.workstation import ROS2WorkstationNode
-from unilabos.devices.workstation.coin_cell_assembly.YB_YH_materials import YihuaCoinCellDeck, yihua_coin_cell_deck
+from unilabos.devices.workstation.coin_cell_assembly.YB_YH_materials import CoincellDeck
 from unilabos.resources.graphio import convert_resources_to_type
 from unilabos.utils.log import logger
 import struct
@@ -161,9 +161,7 @@ class CoinCellAssemblyWorkstation(WorkstationBase):
             logger.info("没有传入依华deck，检查启动json文件")
         super().__init__(deck=deck, *args, **kwargs,)
         self.debug_mode = debug_mode
-        self._modbus_address = address
-        self._modbus_port = port
-
+ 
         """ 连接初始化 """
         modbus_client = TCPClient(addr=address, port=port)
         logger.debug(f"创建 Modbus 客户端: {modbus_client}")
@@ -180,11 +178,9 @@ class CoinCellAssemblyWorkstation(WorkstationBase):
                 raise ValueError('modbus tcp connection failed')
             self.nodes = BaseClient.load_csv(os.path.join(os.path.dirname(__file__), 'coin_cell_assembly_b.csv'))                            
             self.client = modbus_client.register_node_list(self.nodes)
-            self._modbus_client_raw = modbus_client
         else:
             print("测试模式，跳过连接")
             self.nodes, self.client = None, None
-            self._modbus_client_raw = None
 
         """ 工站的配置 """
 
@@ -195,40 +191,9 @@ class CoinCellAssemblyWorkstation(WorkstationBase):
         self.csv_export_file = None
         self.coin_num_N = 0  #已组装电池数量
 
-    def _ensure_modbus_connected(self) -> None:
-        """检查 Modbus TCP 连接是否存活，若已断开则自动重连（防止长时间空闲后连接超时）"""
-        if self.debug_mode or self._modbus_client_raw is None:
-            return
-        raw_client = self._modbus_client_raw.client
-        if raw_client.is_socket_open():
-            return
-        logger.warning("[Modbus] 检测到连接已断开，尝试重连...")
-        try:
-            raw_client.close()
-        except Exception:
-            pass
-        count = 10
-        while count > 0:
-            count -= 1
-            try:
-                raw_client.connect()
-            except Exception:
-                pass
-            if raw_client.is_socket_open():
-                break
-            time.sleep(2)
-        if not raw_client.is_socket_open():
-            raise RuntimeError(f"Modbus TCP 重连失败（{self._modbus_address}:{self._modbus_port}），请检查设备连接")
-        logger.info("[Modbus] 重连成功")
-
     def post_init(self, ros_node: ROS2WorkstationNode):
         self._ros_node = ros_node
-
-        # Deck 为空时（反序列化未恢复子节点），主动调用 setup() 初始化子物料
-        if self.deck and not self.deck.children and hasattr(self.deck, "setup") and callable(self.deck.setup):
-            logger.info("YihuaCoinCellDeck 无子节点，调用 setup() 初始化")
-            self.deck.setup()
-
+        #self.deck = create_a_coin_cell_deck()
         ROS2DeviceNode.run_async_func(self._ros_node.update_resource, True, **{
             "resources": [self.deck]
         })
@@ -658,28 +623,12 @@ class CoinCellAssemblyWorkstation(WorkstationBase):
         return vol
 
     @property
-    def data_coin_type(self) -> int:
-        """电池类型 - 7种或8种组装物料 (INT16)"""
-        if self.debug_mode:
-            return 7
-        coin_type, read_err = self.client.use_node('REG_DATA_COIN_TYPE').read(1)
-        return coin_type
-    
-    @property
-    def data_current_assembling_count(self) -> int:
-        """当前进行组装的电池数量 - Current assembling battery count (INT16)"""
+    def data_coin_num(self) -> int:
+        """当前电池数量 (INT16)"""
         if self.debug_mode:
             return 0
-        count, read_err = self.client.use_node('REG_DATA_CURRENT_ASSEMBLING_COUNT').read(1)
-        return count
-    
-    @property
-    def data_current_completed_count(self) -> int:
-        """当前完成组装的电池数量 - Current completed battery count (INT16)"""
-        if self.debug_mode:
-            return 0
-        count, read_err = self.client.use_node('REG_DATA_CURRENT_COMPLETED_COUNT').read(1)
-        return count
+        num, read_err = self.client.use_node('REG_DATA_COIN_NUM').read(1)
+        return num
 
     @property
     def data_coin_cell_code(self) -> str:
@@ -777,116 +726,6 @@ class CoinCellAssemblyWorkstation(WorkstationBase):
             return 0.0
         return _decode_float32_correct(result.registers)
 
-    @property
-    def data_10mm_positive_plate_remaining(self) -> float:
-        """10mm正极片剩余物料数量 (FLOAT32)"""
-        if self.debug_mode:
-            return 0.0
-        result = self.client.client.read_holding_registers(address=self.client.use_node('REG_DATA_10MM_POSITIVE_PLATE_REMAINING_COUNT').address, count=2)
-        if result.isError():
-            logger.error("读取10mm正极片余量失败")
-            return 0.0
-        return _decode_float32_correct(result.registers)
-
-    @property
-    def data_12mm_positive_plate_remaining(self) -> float:
-        """12mm正极片剩余物料数量 (FLOAT32)"""
-        if self.debug_mode:
-            return 0.0
-        result = self.client.client.read_holding_registers(address=self.client.use_node('REG_DATA_12MM_POSITIVE_PLATE_REMAINING_COUNT').address, count=2)
-        if result.isError():
-            logger.error("读取12mm正极片余量失败")
-            return 0.0
-        return _decode_float32_correct(result.registers)
-
-    @property
-    def data_16mm_positive_plate_remaining(self) -> float:
-        """16mm正极片剩余物料数量 (FLOAT32)"""
-        if self.debug_mode:
-            return 0.0
-        result = self.client.client.read_holding_registers(address=self.client.use_node('REG_DATA_16MM_POSITIVE_PLATE_REMAINING_COUNT').address, count=2)
-        if result.isError():
-            logger.error("读取16mm正极片余量失败")
-            return 0.0
-        return _decode_float32_correct(result.registers)
-
-    @property
-    def data_aluminum_foil_remaining(self) -> float:
-        """铝箔剩余物料数量 (FLOAT32)"""
-        if self.debug_mode:
-            return 0.0
-        result = self.client.client.read_holding_registers(address=self.client.use_node('REG_DATA_ALUMINUM_FOIL_REMAINING_COUNT').address, count=2)
-        if result.isError():
-            logger.error("读取铝箔余量失败")
-            return 0.0
-        return _decode_float32_correct(result.registers)
-
-    @property
-    def data_positive_shell_remaining(self) -> float:
-        """正极壳剩余物料数量 (FLOAT32)"""
-        if self.debug_mode:
-            return 0.0
-        result = self.client.client.read_holding_registers(address=self.client.use_node('REG_DATA_POSITIVE_SHELL_REMAINING_COUNT').address, count=2)
-        if result.isError():
-            logger.error("读取正极壳余量失败")
-            return 0.0
-        return _decode_float32_correct(result.registers)
-
-    @property
-    def data_flat_washer_remaining(self) -> float:
-        """平垫剩余物料数量 (FLOAT32)"""
-        if self.debug_mode:
-            return 0.0
-        result = self.client.client.read_holding_registers(address=self.client.use_node('REG_DATA_FLAT_WASHER_REMAINING_COUNT').address, count=2)
-        if result.isError():
-            logger.error("读取平垫余量失败")
-            return 0.0
-        return _decode_float32_correct(result.registers)
-
-    @property
-    def data_negative_shell_remaining(self) -> float:
-        """负极壳剩余物料数量 (FLOAT32)"""
-        if self.debug_mode:
-            return 0.0
-        result = self.client.client.read_holding_registers(address=self.client.use_node('REG_DATA_NEGATIVE_SHELL_REMAINING_COUNT').address, count=2)
-        if result.isError():
-            logger.error("读取负极壳余量失败")
-            return 0.0
-        return _decode_float32_correct(result.registers)
-
-    @property
-    def data_spring_washer_remaining(self) -> float:
-        """弹垫剩余物料数量 (FLOAT32)"""
-        if self.debug_mode:
-            return 0.0
-        result = self.client.client.read_holding_registers(address=self.client.use_node('REG_DATA_SPRING_WASHER_REMAINING_COUNT').address, count=2)
-        if result.isError():
-            logger.error("读取弹垫余量失败")
-            return 0.0
-        return _decode_float32_correct(result.registers)
-
-    @property
-    def data_finished_battery_remaining_capacity(self) -> float:
-        """成品电池剩余可容纳数量 (FLOAT32)"""
-        if self.debug_mode:
-            return 0.0
-        result = self.client.client.read_holding_registers(address=self.client.use_node('REG_DATA_FINISHED_BATTERY_REMAINING_CAPACITY').address, count=2)
-        if result.isError():
-            logger.error("读取成品电池余量失败")
-            return 0.0
-        return _decode_float32_correct(result.registers)
-
-    @property
-    def data_finished_battery_ng_remaining_capacity(self) -> float:
-        """成品电池NG槽剩余可容纳数量 (FLOAT32)"""
-        if self.debug_mode:
-            return 0.0
-        result = self.client.client.read_holding_registers(address=self.client.use_node('REG_DATA_FINISHED_BATTERY_NG_REMAINING_CAPACITY').address, count=2)
-        if result.isError():
-            logger.error("读取成品电池NG槽余量失败")
-            return 0.0
-        return _decode_float32_correct(result.registers)
-
 #    @property
 #    def data_stack_vision_code(self) -> int:
 #        """物料堆叠复检图片编码 (INT16)"""
@@ -1086,7 +925,6 @@ class CoinCellAssemblyWorkstation(WorkstationBase):
         
         # 步骤0: 前置条件检查
         logger.info("\n【步骤 0/4】前置条件检查...")
-        self._ensure_modbus_connected()
         try:
             # 检查 REG_UNILAB_INTERACT (应该为False，表示使用Unilab交互)
             unilab_interact_node = self.client.use_node('REG_UNILAB_INTERACT')
@@ -1147,42 +985,6 @@ class CoinCellAssemblyWorkstation(WorkstationBase):
                 raise RuntimeError(error_msg)
             
             logger.info("  ✓ COIL_GB_L_IGNORE_CMD 检查通过 (值为False，使用左手套箱)")
-            
-            # 检查握手寄存器残留（正常初始状态均应为False）
-            # 若上次运行意外断网，这些Unilab侧COIL可能被遗留为True，导致PLC逻辑卡死
-            handshake_checks = [
-                ("COIL_UNILAB_SEND_MSG_SUCC_CMD",       "Unilab→PLC 配方发送完毕",     "上次配方握手未正常复位，PLC可能处于等待配方的卡死状态"),
-                ("COIL_UNILAB_REC_MSG_SUCC_CMD",        "Unilab→PLC 数据接收完毕",     "上次数据接收握手未正常复位"),
-                ("UNILAB_SEND_ELECTROLYTE_BOTTLE_NUM",  "Unilab→PLC 瓶数发送完毕",     "上次瓶数握手未正常复位"),
-                ("UNILAB_SEND_FINISHED_CMD",            "Unilab→PLC 一组完成确认",     "上次完成握手未正常复位"),
-                ("COIL_REQUEST_REC_MSG_STATUS",         "PLC→Unilab 请求接收配方",     "PLC正处于等待配方状态，设备流程已卡死，需重启PLC或手动复位握手"),
-                ("COIL_REQUEST_SEND_MSG_STATUS",        "PLC→Unilab 请求发送测试数据", "PLC正处于等待发送数据状态，设备流程已卡死"),
-            ]
-            for coil_name, coil_desc, stuck_reason in handshake_checks:
-                try:
-                    hs_node = self.client.use_node(coil_name)
-                    hs_value, hs_err = hs_node.read(1)
-                    if hs_err:
-                        logger.warning(f"  ⚠ 无法读取 {coil_name}，跳过此项检查")
-                        continue
-                    hs_actual = hs_value[0] if isinstance(hs_value, (list, tuple)) else hs_value
-                    logger.info(f"  {coil_name} 当前值: {hs_actual}")
-                    if hs_actual:
-                        error_msg = (
-                            "❌ 前置握手寄存器检查失败！\n"
-                            f"  {coil_name} = True (期望值: False)\n"
-                            f"  含义: {coil_desc}\n"
-                            f"  原因: {stuck_reason}\n"
-                            "  建议: 检查上次运行是否意外中断，手动将该寄存器置为False后重试"
-                        )
-                        logger.error(error_msg)
-                        raise RuntimeError(error_msg)
-                    logger.info(f"  ✓ {coil_name} 检查通过 (值为False)")
-                except RuntimeError:
-                    raise
-                except Exception as hs_e:
-                    logger.warning(f"  ⚠ 检查 {coil_name} 时发生异常: {hs_e}，跳过此项")
-            
             logger.info("✓ 所有前置条件检查通过！")
             
         except ValueError as e:
@@ -1356,8 +1158,7 @@ class CoinCellAssemblyWorkstation(WorkstationBase):
         lvbodian: bool = True,
         battery_pressure_mode: bool = True,
         battery_clean_ignore: bool = False,
-        file_path: str = "/Users/sml/work",
-        formulations: List[Dict] = None
+        file_path: str = "/Users/sml/work"
     ) -> Dict[str, Any]:
         """
         发送瓶数+简化组装函数（适用于第二批次及后续批次）
@@ -1384,77 +1185,17 @@ class CoinCellAssemblyWorkstation(WorkstationBase):
             battery_pressure_mode: 是否启用压力模式
             battery_clean_ignore: 是否忽略电池清洁
             file_path: 实验记录保存路径
-            formulations: 配方信息列表（从 create_orders.mass_ratios 获取）
-                         包含 orderCode, target_mass_ratio, real_mass_ratio 等
-                         用于CSV数据追溯，可选参数
             
         Returns:
             dict: 包含组装结果的字典
             
-        注意:
+        注意：
             - 第一次启动需先调用 func_pack_device_init_auto_start_combined()
             - 后续批次直接调用此函数即可
         """
         logger.info("=" * 60)
         logger.info("开始发送瓶数+简化组装流程...")
         logger.info(f"电解液瓶数: {elec_num}, 每瓶电池数: {elec_use_num}")
-        
-        # 存储配方信息到设备状态（供 CSV 写入使用）
-        if formulations:
-            logger.info(f"接收到配方信息: {len(formulations)} 条")
-            # 将配方信息按 orderCode 索引，方便后续查找
-            self._formulations_map = {
-                f["orderCode"]: f for f in formulations
-            } if formulations else {}
-            # ✅ 新增：存储配方列表（按接收顺序），用于索引访问（兜底用）
-            self._formulations_list = formulations
-            # ✅ 新增：按分液瓶条码（vial_bottle_barcodes）反向索引配方
-            # 配液站夹爪取放顺序与扣电站夹取顺序可能不同，所以不能再依赖位置序号，
-            # 必须用扣电站扫码得到的 data_electrolyte_code 去对齐配液站登记的瓶条码。
-            # vial_bottle_barcodes 字段可能形如 "LG100114"（单瓶）或 '["LG100114","LG100115"]'（多瓶）。
-            self._formulations_by_vial_barcode: Dict[str, Dict] = {}
-            for f in formulations:
-                raw_barcodes = f.get("vial_bottle_barcodes", "")
-                if not raw_barcodes:
-                    continue
-                barcodes: List[str] = []
-                if isinstance(raw_barcodes, list):
-                    barcodes = [str(b).strip() for b in raw_barcodes if b]
-                else:
-                    s = str(raw_barcodes).strip()
-                    if s.startswith("[") and s.endswith("]"):
-                        try:
-                            parsed = json.loads(s)
-                            if isinstance(parsed, list):
-                                barcodes = [str(b).strip() for b in parsed if b]
-                            else:
-                                barcodes = [str(parsed).strip()]
-                        except Exception:
-                            barcodes = [s]
-                    else:
-                        barcodes = [s]
-                for bc in barcodes:
-                    if bc and bc not in self._formulations_by_vial_barcode:
-                        self._formulations_by_vial_barcode[bc] = f
-            logger.info(
-                f"已建立分液瓶条码 → 配方索引: {len(self._formulations_by_vial_barcode)} 条 "
-                f"(条码: {list(self._formulations_by_vial_barcode.keys())})"
-            )
-        else:
-            logger.warning("未接收到配方信息，CSV将不包含配方字段")
-            self._formulations_map = {}
-            self._formulations_list = []
-            self._formulations_by_vial_barcode = {}
-        
-        # ✅ 新增：存储每瓶电池数，用于计算当前使用的瓶号
-        # ⚠️ 确保转换为整数（前端可能传递字符串）
-        self._elec_use_num = int(elec_use_num) if elec_use_num else 0
-        logger.info(f"已存储参数: 每瓶电池数={self._elec_use_num}, 配方数={len(self._formulations_list)}")
-        
-        # ✅ 新增：软件层电池计数器（防止硬件计数器不准确）
-        self._software_battery_counter = 0  # 从0开始，每写入一次CSV递增
-        logger.info("软件层电池计数器已初始化")
-        
         logger.info("=" * 60)
         
         # 步骤1: 发送电解液瓶数（触发物料搬运）
@@ -1590,8 +1331,7 @@ class CoinCellAssemblyWorkstation(WorkstationBase):
         data_assembly_time = self.data_assembly_time
         data_assembly_pressure = self.data_assembly_pressure
         data_electrolyte_volume = self.data_electrolyte_volume
-        data_coin_type = self.data_coin_type  # 电池类型（7或8种物料）
-        data_battery_number = self.data_current_assembling_count  # ✅ 真正的电池编号
+        data_coin_num = self.data_coin_num
         
         # 处理电解液二维码 - 确保是字符串类型
         try:
@@ -1621,32 +1361,28 @@ class CoinCellAssemblyWorkstation(WorkstationBase):
         logger.debug(f"data_assembly_time: {data_assembly_time}")
         logger.debug(f"data_assembly_pressure: {data_assembly_pressure}")
         logger.debug(f"data_electrolyte_volume: {data_electrolyte_volume}")
-        logger.debug(f"data_coin_type: {data_coin_type}")  # 电池类型
-        logger.debug(f"data_battery_number: {data_battery_number}")  # ✅ 电池编号
+        logger.debug(f"data_coin_num: {data_coin_num}")
         logger.debug(f"data_electrolyte_code: {data_electrolyte_code}")
         logger.debug(f"data_coin_cell_code: {data_coin_cell_code}")
         #接收完信息后，读取完毕标志位置True
-        finished_battery_magazine = self.deck.get_resource("成品弹夹")        
-        
-        # 计算电池应该放在哪个洞，以及洞内的堆叠位置
-        # 成品弹夹有6个洞，每个洞可堆叠20颗电池
-        # 前5个洞（索引0-4）放正常电池，第6个洞（索引5）放NG电池
-        BATTERIES_PER_HOLE = 20
-        MAX_NORMAL_BATTERIES = 100  # 5个洞 × 20颗/洞
-        
-        hole_index = self.coin_num_N // BATTERIES_PER_HOLE  # 第几个洞（0-4为正常电池）
-        in_hole_position = self.coin_num_N % BATTERIES_PER_HOLE  # 洞内的堆叠序号
-        
-        if hole_index >= 5:
-            logger.error(f"电池数量超出正常容量范围: {self.coin_num_N + 1} > {MAX_NORMAL_BATTERIES}")
-            raise ValueError(f"成品弹夹正常洞位已满（最多{MAX_NORMAL_BATTERIES}颗），当前尝试放置第{self.coin_num_N + 1}颗")
-        
-        target_hole = finished_battery_magazine.children[hole_index]  # 获取目标洞
+        liaopan3 = self.deck.get_resource("成品弹夹")        
         
         # 生成唯一的电池名称（使用时间戳确保唯一性）
         timestamp_suffix = datetime.now().strftime("%Y%m%d_%H%M%S_%f")
         battery_name = f"battery_{self.coin_num_N}_{timestamp_suffix}"
         
+        # 检查目标位置是否已有资源，如果有则先卸载
+        target_slot = liaopan3.children[self.coin_num_N]
+        if target_slot.children:
+            logger.warning(f"位置 {self.coin_num_N} 已有资源，将先卸载旧资源")
+            try:
+                # 卸载所有现有子资源
+                for child in list(target_slot.children):
+                    target_slot.unassign_child_resource(child)
+                    logger.info(f"已卸载旧资源: {child.name}")
+            except Exception as e:
+                logger.error(f"卸载旧资源时出错: {e}")
+        
         # 创建新的电池资源
         battery = ElectrodeSheet(name=battery_name, size_x=14, size_y=14, size_z=2)
         battery._unilabos_state = {
@@ -1657,12 +1393,13 @@ class CoinCellAssemblyWorkstation(WorkstationBase):
                             "electrolyte_volume": data_electrolyte_volume
                             }
         
-        # 将电池堆叠到目标洞中
+        # 分配新资源到目标位置
         try:
-            target_hole.assign_child_resource(battery, location=None)
-            logger.info(f"成功放置电池 {battery_name} 到弹夹洞{hole_index}的第{in_hole_position + 1}层 (总计第{self.coin_num_N + 1}颗)")
+            target_slot.assign_child_resource(battery, location=None)
+            logger.info(f"成功分配电池 {battery_name} 到位置 {self.coin_num_N}")
         except Exception as e:
-            logger.error(f"放置电池资源失败: {e}")
+            logger.error(f"分配电池资源失败: {e}")
+            # 如果分配失败，尝试使用更简单的方法
             raise
         
         #print(jipian2.parent)
@@ -1683,7 +1420,6 @@ class CoinCellAssemblyWorkstation(WorkstationBase):
         time_date = datetime.now().strftime("%Y%m%d")
             #秒级时间戳用于标记每一行电池数据
         timestamp = datetime.now().strftime("%Y%m%d_%H%M%S")
-        self._last_assembly_timestamp = timestamp
             #生成输出文件的变量
         self.csv_export_file = os.path.join(file_path, f"date_{time_date}.csv")   
         #将数据存入csv文件
@@ -1694,107 +1430,17 @@ class CoinCellAssemblyWorkstation(WorkstationBase):
                 writer.writerow([
                     'Time', 'open_circuit_voltage', 'pole_weight', 
                     'assembly_time', 'assembly_pressure', 'electrolyte_volume', 
-                    'data_coin_type', 'electrolyte_code', 'coin_cell_code',
-                    'orderName', 'prep_bottle_barcode', 'vial_bottle_barcodes',
-                    'target_mass_ratio', 'real_mass_ratio'
+                    'coin_num', 'electrolyte_code', 'coin_cell_code'
                 ])
                 #立刻写入磁盘
                 csvfile.flush()
         #开始追加电池信息
         with open(self.csv_export_file, 'a', newline='', encoding='utf-8') as csvfile:
             writer = csv.writer(csvfile)
-            
-            # ========== 提取配方信息 ==========
-            formulation_order_name = ""
-            prep_bottle_barcode = ""
-            vial_bottle_barcodes = ""
-            target_ratio_str = ""
-            real_ratio_str = ""
-            
-            # 从 self._formulations_list 获取配方信息
-            if hasattr(self, '_formulations_list') and self._formulations_list:
-                # ============================================================
-                # ✅ 主方案：用扣电站扫码得到的电解液瓶条码 (data_electrolyte_code)
-                #   反查配液站登记的 vial_bottle_barcodes，避免依赖夹爪取放顺序。
-                # 配液站和扣电站的瓶子顺序往往不一致（不同自动化设备的取放策略不同），
-                # 按位置序号匹配会错位；但每个瓶子的条码是唯一的，按条码匹配最可靠。
-                # ============================================================
-                formulation = None
-                match_method = ""
-
-                barcode_map = getattr(self, "_formulations_by_vial_barcode", {}) or {}
-                scan_code = (data_electrolyte_code or "").strip()
-                if scan_code and scan_code != "N/A" and barcode_map:
-                    formulation = barcode_map.get(scan_code)
-                    if formulation is not None:
-                        match_method = f"按条码({scan_code})精确匹配"
-                    else:
-                        logger.warning(
-                            f"[CSV写入] 电池 {data_battery_number}: 扫码条码 {scan_code} "
-                            f"在配方索引中找不到 (已登记条码: {list(barcode_map.keys())})"
-                        )
-
-                # ============================================================
-                # 🔁 降级方案：扫码失败 / 条码缺失时按瓶号位置兜底
-                #   保留原有"每瓶电池数"或"二维码尾号"的位置推断逻辑，
-                #   确保在异常路径下仍能落盘（位置推断的结果可能不准，仅供回溯）。
-                # ============================================================
-                if formulation is None:
-                    if hasattr(self, '_elec_use_num') and self._elec_use_num:
-                        elec_use_num_int = int(self._elec_use_num) if self._elec_use_num else 1
-                        if elec_use_num_int > 0:
-                            current_bottle_index = (data_battery_number - 1) // elec_use_num_int
-                        else:
-                            current_bottle_index = 0
-
-                        logger.debug(
-                            f"[CSV写入] 电池 {data_battery_number}: 降级按瓶号索引={current_bottle_index} "
-                            f"(每瓶{self._elec_use_num}颗电池)"
-                        )
-                    else:
-                        current_bottle_index = (
-                            int(data_electrolyte_code.split('-')[-1])
-                            if '-' in str(data_electrolyte_code)
-                            else 0
-                        )
-                        logger.debug(
-                            f"[CSV写入] 电池 {data_battery_number}: 降级按二维码尾号瓶号索引={current_bottle_index}"
-                        )
-
-                    if 0 <= current_bottle_index < len(self._formulations_list):
-                        formulation = self._formulations_list[current_bottle_index]
-                        match_method = f"按位置兜底匹配[{current_bottle_index}]"
-                    else:
-                        logger.warning(
-                            f"[CSV写入] 电池 {data_battery_number}: 瓶号索引 {current_bottle_index} "
-                            f"超出配方列表范围 (共{len(self._formulations_list)}个配方)"
-                        )
-
-                if formulation is not None:
-                    formulation_order_name = formulation.get("orderName", "")
-                    prep_bottle_barcode = formulation.get("prep_bottle_barcode", "")
-                    vial_bottle_barcodes = formulation.get("vial_bottle_barcodes", "")
-
-                    real_ratio = formulation.get("real_mass_ratio", {})
-                    target_ratio = formulation.get("target_mass_ratio", {})
-
-                    target_ratio_str = json.dumps(target_ratio, ensure_ascii=False) if target_ratio else ""
-                    real_ratio_str = json.dumps(real_ratio, ensure_ascii=False) if real_ratio else ""
-
-                    logger.info(
-                        f"[CSV写入] 电池 {data_battery_number} ({match_method}): "
-                        f"orderName={formulation_order_name}, 配液瓶={prep_bottle_barcode}, "
-                        f"分液瓶={vial_bottle_barcodes}"
-                    )
-            else:
-                logger.debug(f"[CSV写入] 电池 {data_battery_number}: 未找到配方信息数据")
-            
             writer.writerow([
                 timestamp, data_open_circuit_voltage, data_pole_weight,
                 data_assembly_time, data_assembly_pressure, data_electrolyte_volume,
-                data_coin_type, data_electrolyte_code, data_coin_cell_code,
-                formulation_order_name, prep_bottle_barcode, vial_bottle_barcodes,
-                target_ratio_str, real_ratio_str
+                data_coin_num, data_electrolyte_code, data_coin_cell_code
             ])
             #立刻写入磁盘
             csvfile.flush()
@@ -1939,18 +1585,17 @@ class CoinCellAssemblyWorkstation(WorkstationBase):
                     pole_weight = 0.0
                 
                 battery_info = {
-                    "Time": getattr(self, "_last_assembly_timestamp", datetime.now().strftime("%Y%m%d_%H%M%S")),
+                    "battery_index": coin_num_N + 1,
+                    "battery_barcode": battery_qr_code,
+                    "electrolyte_barcode": electrolyte_qr_code,
                     "open_circuit_voltage": open_circuit_voltage,
                     "pole_weight": pole_weight,
                     "assembly_time": self.data_assembly_time,
                     "assembly_pressure": self.data_assembly_pressure,
-                    "electrolyte_volume": self.data_electrolyte_volume,
-                    "data_coin_type": getattr(self, "data_coin_type", 0),
-                    "electrolyte_code": electrolyte_qr_code,
-                    "coin_cell_code": battery_qr_code,
+                    "electrolyte_volume": self.data_electrolyte_volume
                 }
                 battery_data_list.append(battery_info)
-                print(f"已收集第 {coin_num_N + 1} 个电池数据: 电池码={battery_info['coin_cell_code']}, 电解液码={battery_info['electrolyte_code']}")
+                print(f"已收集第 {coin_num_N + 1} 个电池数据: 电池码={battery_info['battery_barcode']}, 电解液码={battery_info['electrolyte_barcode']}")
                 
                 time.sleep(1)
                 # TODO:读完再将电池数加一还是进入循环就将电池数加一需要考虑
@@ -1979,7 +1624,6 @@ class CoinCellAssemblyWorkstation(WorkstationBase):
             "success": True,
             "total_batteries": len(battery_data_list),
             "batteries": battery_data_list,
-            "assembly_data": battery_data_list,
             "summary": {
                 "electrolyte_bottles_used": elec_num,
                 "batteries_per_bottle": elec_use_num,
@@ -2023,7 +1667,8 @@ class CoinCellAssemblyWorkstation(WorkstationBase):
         file_path: str = "/Users/sml/work"
     ) -> Dict[str, Any]:
         """
-    
+        简化版电池组装函数，整合了原 qiming_coin_cell_code 的参数设置和双滴模式
+        
         此函数是 func_allpack_cmd 的增强版本，自动处理以下配置：
         - 负极片和隔膜的盘数及矩阵点位
         - 枪头盒矩阵点位
@@ -2194,18 +1839,17 @@ class CoinCellAssemblyWorkstation(WorkstationBase):
                     pole_weight = 0.0
                 
                 battery_info = {
-                    "Time": getattr(self, "_last_assembly_timestamp", datetime.now().strftime("%Y%m%d_%H%M%S")),
+                    "battery_index": coin_num_N + 1,
+                    "battery_barcode": battery_qr_code,
+                    "electrolyte_barcode": electrolyte_qr_code,
                     "open_circuit_voltage": open_circuit_voltage,
                     "pole_weight": pole_weight,
                     "assembly_time": self.data_assembly_time,
                     "assembly_pressure": self.data_assembly_pressure,
-                    "electrolyte_volume": self.data_electrolyte_volume,
-                    "data_coin_type": getattr(self, "data_coin_type", 0),
-                    "electrolyte_code": electrolyte_qr_code,
-                    "coin_cell_code": battery_qr_code,
+                    "electrolyte_volume": self.data_electrolyte_volume
                 }
                 battery_data_list.append(battery_info)
-                print(f"已收集第 {coin_num_N + 1} 个电池数据: 电池码={battery_info['coin_cell_code']}, 电解液码={battery_info['electrolyte_code']}")
+                print(f"已收集第 {coin_num_N + 1} 个电池数据: 电池码={battery_info['battery_barcode']}, 电解液码={battery_info['electrolyte_barcode']}")
                 
                 time.sleep(1)
 
@@ -2232,7 +1876,6 @@ class CoinCellAssemblyWorkstation(WorkstationBase):
             "success": True,
             "total_batteries": len(battery_data_list),
             "batteries": battery_data_list,
-            "assembly_data": battery_data_list,
             "summary": {
                 "electrolyte_bottles_used": elec_num,
                 "batteries_per_bottle": elec_use_num,
@@ -2279,7 +1922,7 @@ class CoinCellAssemblyWorkstation(WorkstationBase):
     
     def fun_wuliao_test(self) -> bool: 
         #找到data_init中构建的2个物料盘
-        test_battery_plate = self.deck.get_resource("\u7535\u6c60\u6599\u76d8")
+        liaopan3 = self.deck.get_resource("\u7535\u6c60\u6599\u76d8")
         for i in range(16):            
             battery = ElectrodeSheet(name=f"battery_{i}", size_x=16, size_y=16, size_z=2)
             battery._unilabos_state = {
@@ -2289,7 +1932,7 @@ class CoinCellAssemblyWorkstation(WorkstationBase):
                                 "electrolyte_volume": 20.0,
                                 "electrolyte_name": f"DP{i}"
                                 }
-            test_battery_plate.children[i].assign_child_resource(battery, location=None)
+            liaopan3.children[i].assign_child_resource(battery, location=None)
             
             ROS2DeviceNode.run_async_func(self._ros_node.update_resource, True, **{
                 "resources": [self.deck]
@@ -2332,7 +1975,7 @@ class CoinCellAssemblyWorkstation(WorkstationBase):
             data_assembly_time = self.data_assembly_time
             data_assembly_pressure = self.data_assembly_pressure
             data_electrolyte_volume = self.data_electrolyte_volume
-            data_coin_type = self.data_coin_type  # 电池类型（7或8种物料）
+            data_coin_num = self.data_coin_num
             data_electrolyte_code = self.data_electrolyte_code
             data_coin_cell_code = self.data_coin_cell_code
             # 电解液瓶位置
@@ -2446,7 +2089,7 @@ class CoinCellAssemblyWorkstation(WorkstationBase):
                 writer.writerow([
                     timestamp, data_open_circuit_voltage, data_pole_weight,
                     data_assembly_time, data_assembly_pressure, data_electrolyte_volume,
-                    data_coin_type, data_electrolyte_code, data_coin_cell_code  # ✅ 已修正
+                    data_coin_num, data_electrolyte_code, data_coin_cell_code
                 ])
                 #立刻写入磁盘
                 csvfile.flush()
@@ -2497,7 +2140,7 @@ class CoinCellAssemblyWorkstation(WorkstationBase):
 
 if __name__ == "__main__":
     # 简单测试
-    workstation = CoinCellAssemblyWorkstation(deck=yihua_coin_cell_deck(name="coin_cell_deck"))
+    workstation = CoinCellAssemblyWorkstation(deck=CoincellDeck(setup=True, name="coin_cell_deck"))
     # workstation.qiming_coin_cell_code(fujipian_panshu=1, fujipian_juzhendianwei=2, gemopanshu=3, gemo_juzhendianwei=4, lvbodian=False, battery_pressure_mode=False, battery_pressure=4200, battery_clean_ignore=False)
     # print(f"工作站创建成功: {workstation.deck.name}")
     # print(f"料盘数量: {len(workstation.deck.children)}")

unilabos/devices/workstation/coin_cell_assembly/coin_cell_assembly_b.csv

@@ -0,0 +1,133 @@
+Name,DataType,InitValue,Comment,Attribute,DeviceType,Address,
+COIL_SYS_START_CMD,BOOL,,,,coil,8010,
+COIL_SYS_STOP_CMD,BOOL,,,,coil,8020,
+COIL_SYS_RESET_CMD,BOOL,,,,coil,8030,
+COIL_SYS_HAND_CMD,BOOL,,,,coil,8040,
+COIL_SYS_AUTO_CMD,BOOL,,,,coil,8050,
+COIL_SYS_INIT_CMD,BOOL,,,,coil,8060,
+COIL_UNILAB_SEND_MSG_SUCC_CMD,BOOL,,,,coil,8700,
+COIL_UNILAB_REC_MSG_SUCC_CMD,BOOL,,,,coil,8710,unilab_rec_msg_succ_cmd
+COIL_SYS_START_STATUS,BOOL,,,,coil,8210,
+COIL_SYS_STOP_STATUS,BOOL,,,,coil,8220,
+COIL_SYS_RESET_STATUS,BOOL,,,,coil,8230,
+COIL_SYS_HAND_STATUS,BOOL,,,,coil,8240,
+COIL_SYS_AUTO_STATUS,BOOL,,,,coil,8250,
+COIL_SYS_INIT_STATUS,BOOL,,,,coil,8260,
+COIL_REQUEST_REC_MSG_STATUS,BOOL,,,,coil,8500,
+COIL_REQUEST_SEND_MSG_STATUS,BOOL,,,,coil,8510,request_send_msg_status
+REG_MSG_ELECTROLYTE_USE_NUM,INT16,,,,hold_register,11000,
+REG_MSG_ELECTROLYTE_NUM,INT16,,,,hold_register,11002,unilab_send_msg_electrolyte_num
+REG_MSG_ELECTROLYTE_VOLUME,INT16,,,,hold_register,11004,unilab_send_msg_electrolyte_vol
+REG_MSG_ASSEMBLY_TYPE,INT16,,,,hold_register,11006,unilab_send_msg_assembly_type
+REG_MSG_ASSEMBLY_PRESSURE,INT16,,,,hold_register,11008,unilab_send_msg_assembly_pressure
+REG_DATA_ASSEMBLY_COIN_CELL_NUM,INT16,,,,hold_register,10000,data_assembly_coin_cell_num
+REG_DATA_OPEN_CIRCUIT_VOLTAGE,FLOAT32,,,,hold_register,10002,data_open_circuit_voltage
+REG_DATA_AXIS_X_POS,FLOAT32,,,,hold_register,10004,
+REG_DATA_AXIS_Y_POS,FLOAT32,,,,hold_register,10006,
+REG_DATA_AXIS_Z_POS,FLOAT32,,,,hold_register,10008,
+REG_DATA_POLE_WEIGHT,FLOAT32,,,,hold_register,10010,data_pole_weight
+REG_DATA_ASSEMBLY_PER_TIME,FLOAT32,,,,hold_register,10012,data_assembly_time
+REG_DATA_ASSEMBLY_PRESSURE,INT16,,,,hold_register,10014,data_assembly_pressure
+REG_DATA_ELECTROLYTE_VOLUME,INT16,,,,hold_register,10016,data_electrolyte_volume
+REG_DATA_COIN_NUM,INT16,,,,hold_register,10018,data_coin_num
+REG_DATA_ELECTROLYTE_CODE,STRING,,,,hold_register,10020,data_electrolyte_code()
+REG_DATA_COIN_CELL_CODE,STRING,,,,hold_register,10030,data_coin_cell_code()
+REG_DATA_STACK_VISON_CODE,STRING,,,,hold_register,12004,data_stack_vision_code()
+REG_DATA_GLOVE_BOX_PRESSURE,FLOAT32,,,,hold_register,10050,data_glove_box_pressure
+REG_DATA_GLOVE_BOX_WATER_CONTENT,FLOAT32,,,,hold_register,10052,data_glove_box_water_content
+REG_DATA_GLOVE_BOX_O2_CONTENT,FLOAT32,,,,hold_register,10054,data_glove_box_o2_content
+UNILAB_SEND_ELECTROLYTE_BOTTLE_NUM,BOOL,,,,coil,8720,
+UNILAB_RECE_ELECTROLYTE_BOTTLE_NUM,BOOL,,,,coil,8520,
+REG_MSG_ELECTROLYTE_NUM_USED,INT16,,,,hold_register,496,
+REG_DATA_ELECTROLYTE_USE_NUM,INT16,,,,hold_register,10000,
+UNILAB_SEND_FINISHED_CMD,BOOL,,,,coil,8730,
+UNILAB_RECE_FINISHED_CMD,BOOL,,,,coil,8530,
+REG_DATA_ASSEMBLY_TYPE,INT16,,,,hold_register,10018,ASSEMBLY_TYPE7or8
+REG_UNILAB_INTERACT,BOOL,,,,coil,8450,
+,,,,,coil,8320,
+COIL_ALUMINUM_FOIL,BOOL,,,,coil,8340,
+REG_MSG_NE_PLATE_MATRIX,INT16,,,,hold_register,440,
+REG_MSG_SEPARATOR_PLATE_MATRIX,INT16,,,,hold_register,450,
+REG_MSG_TIP_BOX_MATRIX,INT16,,,,hold_register,480,
+REG_MSG_NE_PLATE_NUM,INT16,,,,hold_register,443,
+REG_MSG_SEPARATOR_PLATE_NUM,INT16,,,,hold_register,453,
+REG_MSG_PRESS_MODE,BOOL,,,,coil,8360,
+,BOOL,,,,coil,8300,
+,BOOL,,,,coil,8310,
+COIL_GB_L_IGNORE_CMD,BOOL,,,,coil,8320,
+COIL_GB_R_IGNORE_CMD,BOOL,,,,coil,8420,
+,BOOL,,,,coil,8350,
+COIL_ELECTROLYTE_DUAL_DROP_MODE,BOOL,,,,coil,8370,
+,BOOL,,,,coil,8380,
+,BOOL,,,,coil,8390,
+,BOOL,,,,coil,8400,
+,BOOL,,,,coil,8410,
+REG_MSG_DUAL_DROP_FIRST_VOLUME,INT16,,,,hold_register,4001,
+COIL_DUAL_DROP_SUCTION_TIMING,BOOL,,,,coil,8430,
+COIL_DUAL_DROP_START_TIMING,BOOL,,,,coil,8470,
+REG_MSG_BATTERY_CLEAN_IGNORE,BOOL,,,,coil,8460,
+COIL_MATERIAL_SEARCH_DIALOG_APPEAR,BOOL,,,,coil,6470,
+COIL_MATERIAL_SEARCH_CONFIRM_YES,BOOL,,,,coil,6480,
+COIL_MATERIAL_SEARCH_CONFIRM_NO,BOOL,,,,coil,6490,
+COIL_ALARM_100_SYSTEM_ERROR,BOOL,,,,coil,1000,异常100-系统异常
+COIL_ALARM_101_EMERGENCY_STOP,BOOL,,,,coil,1010,异常101-急停
+COIL_ALARM_111_GLOVEBOX_EMERGENCY_STOP,BOOL,,,,coil,1110,异常111-手套箱急停
+COIL_ALARM_112_GLOVEBOX_GRATING_BLOCKED,BOOL,,,,coil,1120,异常112-手套箱内光栅遮挡
+COIL_ALARM_160_PIPETTE_TIP_SHORTAGE,BOOL,,,,coil,1600,异常160-移液枪头缺料
+COIL_ALARM_161_POSITIVE_SHELL_SHORTAGE,BOOL,,,,coil,1610,异常161-正极壳缺料
+COIL_ALARM_162_ALUMINUM_FOIL_SHORTAGE,BOOL,,,,coil,1620,异常162-铝箔垫缺料
+COIL_ALARM_163_POSITIVE_PLATE_SHORTAGE,BOOL,,,,coil,1630,异常163-正极片缺料
+COIL_ALARM_164_SEPARATOR_SHORTAGE,BOOL,,,,coil,1640,异常164-隔膜缺料
+COIL_ALARM_165_NEGATIVE_PLATE_SHORTAGE,BOOL,,,,coil,1650,异常165-负极片缺料
+COIL_ALARM_166_FLAT_WASHER_SHORTAGE,BOOL,,,,coil,1660,异常166-平垫缺料
+COIL_ALARM_167_SPRING_WASHER_SHORTAGE,BOOL,,,,coil,1670,异常167-弹垫缺料
+COIL_ALARM_168_NEGATIVE_SHELL_SHORTAGE,BOOL,,,,coil,1680,异常168-负极壳缺料
+COIL_ALARM_169_FINISHED_BATTERY_FULL,BOOL,,,,coil,1690,异常169-成品电池满料
+COIL_ALARM_201_SERVO_AXIS_01_ERROR,BOOL,,,,coil,2010,异常201-伺服轴01异常
+COIL_ALARM_202_SERVO_AXIS_02_ERROR,BOOL,,,,coil,2020,异常202-伺服轴02异常
+COIL_ALARM_203_SERVO_AXIS_03_ERROR,BOOL,,,,coil,2030,异常203-伺服轴03异常
+COIL_ALARM_204_SERVO_AXIS_04_ERROR,BOOL,,,,coil,2040,异常204-伺服轴04异常
+COIL_ALARM_205_SERVO_AXIS_05_ERROR,BOOL,,,,coil,2050,异常205-伺服轴05异常
+COIL_ALARM_206_SERVO_AXIS_06_ERROR,BOOL,,,,coil,2060,异常206-伺服轴06异常
+COIL_ALARM_207_SERVO_AXIS_07_ERROR,BOOL,,,,coil,2070,异常207-伺服轴07异常
+COIL_ALARM_208_SERVO_AXIS_08_ERROR,BOOL,,,,coil,2080,异常208-伺服轴08异常
+COIL_ALARM_209_SERVO_AXIS_09_ERROR,BOOL,,,,coil,2090,异常209-伺服轴09异常
+COIL_ALARM_210_SERVO_AXIS_10_ERROR,BOOL,,,,coil,2100,异常210-伺服轴10异常
+COIL_ALARM_211_SERVO_AXIS_11_ERROR,BOOL,,,,coil,2110,异常211-伺服轴11异常
+COIL_ALARM_212_SERVO_AXIS_12_ERROR,BOOL,,,,coil,2120,异常212-伺服轴12异常
+COIL_ALARM_213_SERVO_AXIS_13_ERROR,BOOL,,,,coil,2130,异常213-伺服轴13异常
+COIL_ALARM_214_SERVO_AXIS_14_ERROR,BOOL,,,,coil,2140,异常214-伺服轴14异常
+COIL_ALARM_250_OTHER_COMPONENT_ERROR,BOOL,,,,coil,2500,异常250-其他元件异常
+COIL_ALARM_251_PIPETTE_COMM_ERROR,BOOL,,,,coil,2510,异常251-移液枪通讯异常
+COIL_ALARM_252_PIPETTE_ALARM,BOOL,,,,coil,2520,异常252-移液枪报警
+COIL_ALARM_256_ELECTRIC_GRIPPER_ERROR,BOOL,,,,coil,2560,异常256-电爪异常
+COIL_ALARM_262_RB_UNKNOWN_POSITION_ERROR,BOOL,,,,coil,2620,异常262-RB报警：未知点位错误
+COIL_ALARM_263_RB_XYZ_PARAM_LIMIT_ERROR,BOOL,,,,coil,2630,异常263-RB报警：X、Y、Z参数超限制
+COIL_ALARM_264_RB_VISION_PARAM_ERROR,BOOL,,,,coil,2640,异常264-RB报警：视觉参数误差过大
+COIL_ALARM_265_RB_NOZZLE_1_PICK_FAIL,BOOL,,,,coil,2650,异常265-RB报警：1#吸嘴取料失败
+COIL_ALARM_266_RB_NOZZLE_2_PICK_FAIL,BOOL,,,,coil,2660,异常266-RB报警：2#吸嘴取料失败
+COIL_ALARM_267_RB_NOZZLE_3_PICK_FAIL,BOOL,,,,coil,2670,异常267-RB报警：3#吸嘴取料失败
+COIL_ALARM_268_RB_NOZZLE_4_PICK_FAIL,BOOL,,,,coil,2680,异常268-RB报警：4#吸嘴取料失败
+COIL_ALARM_269_RB_TRAY_PICK_FAIL,BOOL,,,,coil,2690,异常269-RB报警：取物料盘失败
+COIL_ALARM_280_RB_COLLISION_ERROR,BOOL,,,,coil,2800,异常280-RB碰撞异常
+COIL_ALARM_290_VISION_SYSTEM_COMM_ERROR,BOOL,,,,coil,2900,异常290-视觉系统通讯异常
+COIL_ALARM_291_VISION_ALIGNMENT_NG,BOOL,,,,coil,2910,异常291-视觉对位NG异常
+COIL_ALARM_292_BARCODE_SCANNER_COMM_ERROR,BOOL,,,,coil,2920,异常292-扫码枪通讯异常
+COIL_ALARM_310_OCV_TRANSFER_NOZZLE_SUCTION_ERROR,BOOL,,,,coil,3100,异常310-开电移载吸嘴吸真空异常
+COIL_ALARM_311_OCV_TRANSFER_NOZZLE_BREAK_ERROR,BOOL,,,,coil,3110,异常311-开电移载吸嘴破真空异常
+COIL_ALARM_312_WEIGHT_TRANSFER_NOZZLE_SUCTION_ERROR,BOOL,,,,coil,3120,异常312-称重移载吸嘴吸真空异常
+COIL_ALARM_313_WEIGHT_TRANSFER_NOZZLE_BREAK_ERROR,BOOL,,,,coil,3130,异常313-称重移载吸嘴破真空异常
+COIL_ALARM_340_OCV_NOZZLE_TRANSFER_CYLINDER_ERROR,BOOL,,,,coil,3400,异常340-开路电压吸嘴移载气缸异常
+COIL_ALARM_342_OCV_NOZZLE_LIFT_CYLINDER_ERROR,BOOL,,,,coil,3420,异常342-开路电压吸嘴升降气缸异常
+COIL_ALARM_344_OCV_CRIMPING_CYLINDER_ERROR,BOOL,,,,coil,3440,异常344-开路电压旋压气缸异常
+COIL_ALARM_350_WEIGHT_NOZZLE_TRANSFER_CYLINDER_ERROR,BOOL,,,,coil,3500,异常350-称重吸嘴移载气缸异常
+COIL_ALARM_352_WEIGHT_NOZZLE_LIFT_CYLINDER_ERROR,BOOL,,,,coil,3520,异常352-称重吸嘴升降气缸异常
+COIL_ALARM_354_CLEANING_CLOTH_TRANSFER_CYLINDER_ERROR,BOOL,,,,coil,3540,异常354-清洗无尘布移载气缸异常
+COIL_ALARM_356_CLEANING_CLOTH_PRESS_CYLINDER_ERROR,BOOL,,,,coil,3560,异常356-清洗无尘布压紧气缸异常
+COIL_ALARM_360_ELECTROLYTE_BOTTLE_POSITION_CYLINDER_ERROR,BOOL,,,,coil,3600,异常360-电解液瓶定位气缸异常
+COIL_ALARM_362_PIPETTE_TIP_BOX_POSITION_CYLINDER_ERROR,BOOL,,,,coil,3620,异常362-移液枪头盒定位气缸异常
+COIL_ALARM_364_REAGENT_BOTTLE_GRIPPER_LIFT_CYLINDER_ERROR,BOOL,,,,coil,3640,异常364-试剂瓶夹爪升降气缸异常
+COIL_ALARM_366_REAGENT_BOTTLE_GRIPPER_CYLINDER_ERROR,BOOL,,,,coil,3660,异常366-试剂瓶夹爪气缸异常
+COIL_ALARM_370_PRESS_MODULE_BLOW_CYLINDER_ERROR,BOOL,,,,coil,3700,异常370-压制模块吹气气缸异常
+COIL_ALARM_151_ELECTROLYTE_BOTTLE_POSITION_ERROR,BOOL,,,,coil,1510,异常151-电解液瓶定位在籍异常
+COIL_ALARM_152_ELECTROLYTE_BOTTLE_CAP_ERROR,BOOL,,,,coil,1520,异常152-电解液瓶盖在籍异常

unilabos/devices/workstation/implementation_plan.md

@@ -1,88 +0,0 @@
-# 物料系统标准化重构方案
-
-根据开发者的反馈，本方案旨在遵循“标准化而非绕过”的原则，对资源类（Deck、Carrier、Magazine）进行重构。核心目标是将物理结构的初始化与物料/极片的初始填充逻辑解耦，彻底解决反序列化过程中的初始化冲突。
-
-## 拟议变更
-
-### [参考] PRCXI9300 标准化模式
-#### [参考文件] [prcxi.py](file:///d:/UniLabdev/Uni-Lab-OS/unilabos/devices/liquid_handling/prcxi/prcxi.py)
-*   **PRCXI9300Deck**: 演示了如何在 `serialize` 中导出 `sites` 元数据，以及如何在 `assign_child_resource` 中实现稳健的槽位匹配（支持按名称、坐标或索引匹配）。
-*   **PRCXI9300Container**: 演示了标准的 `load_state` 和 `serialize_state` 模式，确保业务状态（如 `Material` UUID）能正确往返序列化。
-
-### [组件] 台面 (Decks)
-#### [修改] [decks.py](file:///d:/UniLabdev/Uni-Lab-OS/unilabos/resources/bioyond/decks.py)
-*   将 `BIOYOND_YB_Deck` 重命名为 **`BioyondElectrolyteDeck`**，对应工厂函数 `YB_Deck()` 重命名为 **`bioyond_electrolyte_deck()`**。
-*   `BIOYOND_PolymerReactionStation_Deck` 和 `BIOYOND_PolymerPreparationStation_Deck` **保持不变**。
-*   以上三个 Deck 的 `__init__` 中均移除 `setup` 参数和 `setup()` 调用，删除临时的 `deserialize` 重写。
-
-#### [修改 + 重命名] [YB_YH_materials.py](file:///d:/UniLabdev/Uni-Lab-OS/unilabos/devices/workstation/coin_cell_assembly/YB_YH_materials.py) → `yihua_coin_cell_materials.py`
-*   将 `CoincellDeck` 重命名为 **`YihuaCoinCellDeck`**，对应工厂函数 `YH_Deck()` 重命名为 **`yihua_coin_cell_deck()`**。
-*   从 `YihuaCoinCellDeck.__init__` 中移除 `setup` 参数和 `setup()` 调用，删除临时的 `deserialize` 重写。
-
-### [组件] 容器类与弹夹 (Itemized Carriers & Magazines)
-#### [修改] [magazine.py](file:///d:/UniLabdev/Uni-Lab-OS/unilabos/resources/battery/magazine.py)
-*   重构 `magazine_factory`：将创建 `MagazineHolder` 几何结构（空槽位）的过程与填充 `ElectrodeSheet` 物料的过程分离。
-*   确保 `MagazineHolder` 和 `Magazine` 的 `__init__` 过程中不主动创建任何内容物。
-
-#### [修改] [warehouse.py](file:///d:/UniLabdev/Uni-Lab-OS/unilabos/resources/warehouse.py)
-*   确保 `WareHouse` 类和 `warehouse_factory` 遵循相同模式：先初始化几何结构，内容物另行处理。
-
-#### [修改] [itemized_carrier.py](file:///d:/UniLabdev/Uni-Lab-OS/unilabos/resources/itemized_carrier.py)
-*   移除之前添加的 `idx is None` 兜底补丁。
-*   修复命名规范，确保 `assign_child_resource` 在反序列化时能准确匹配资源。
-
-### [组件] 状态兼容性 (State Compatibility)
-#### [修改] [resource_tracker.py](file:///d:/UniLabdev/Uni-Lab-OS/unilabos/resources/resource_tracker.py)
-*   在 `to_plr_resources` 方法中调用 `load_all_state` 之前，预处理 `all_states` 字典。
-*   对于 `Container` 类型的资源，如果其状态中缺少 `liquid_history` 或 `pending_liquids` 等 PLR 新版本要求的键，则填充默认值（如空列表/字典），防止反序列化中断。
-
-### [组件] 料盘 (Material Plates)
-#### [修改] [YB_YH_materials.py](file:///d:/UniLabdev/Uni-Lab-OS/unilabos/devices/workstation/coin_cell_assembly/YB_YH_materials.py)
-*   重构 `MaterialPlate`：不在 `__init__` 中直接调用 `create_ordered_items_2d`。
-*   重构 `YIHUA_Electrolyte_12VialCarrier`：将其修改为标准的基类定义或在工厂方法中彻底剥离内部 12 个 `YB_pei_ye_xiao_Bottle` 的强制初始化，以防反序列化冲突。
-
-### [组件] 跨站转运与分液瓶板 (Vial Plate Transfer)
-#### [修改] [bioyond_cell_workstation.py] & [YB_YH_materials.py]
-*   **分析**：目前的 `bioyond_cell_workstation.py` 在执行转移时，是用 `sites=["electrolyte_buffer"]` 试图把整块 `YB_Vial_5mL_Carrier` 板转移给目标。但由于实际工艺中，配液站将分液瓶板传往扣电工站后，是由扣电工站的机械臂**逐瓶抓取**并放入内部的 `bottle_rack_6x2`（电解液缓存位），用完后再放入 `bottle_rack_6x2_2`（废液位），因此配液站的这一次“跨工位资源树转移”在逻辑上存在偏差：目标槽位不应该是装单瓶的载体 `bottle_rack`。
-*   **修复方案**：
-    1.  **目标端 (Yihua 侧)**：
-        *   在 `YB_YH_materials.py` 中为从配液站传过来的“分液瓶板”本身设置一个接驳专用的 `PlateSlot`（或者单纯直接移到 Deck 指定坐标）。这个位置负责真正在资源树层级上合法接收配液站传过来的完整 Board。
-        *   重构 `YIHUA_Electrolyte_12VialCarrier`：为了防止初始化反序列化冲突，取消内部在 `__init__` 中自动填充满 12 个 `YB_pei_ye_xiao_Bottle` 实例的逻辑。`bottle_rack_6x2` 和 `bottle_rack_6x2_2` 初始化时均应为空。
-    2.  **转运端 (Bioyond 侧)**：
-        *   修改 `bioyond_cell_workstation.py` 的资源树数字转运代码，将其转移目标对应到 Yihua 侧新设立的“分液瓶板接驳区域”资源，或者干脆只更新资源树坐标位置（使其脱离 Bioyond Deck 加入 Yihua Deck），而不再强行挂载到一个无法容纳 Carrier 的 `bottle_rack_6x2` 内部。
-
-### [组件] 依华扣电组装工站物料余量监控 (Material Monitoring)
-#### [修改] 寄存器直读与前端集成
-*   **物理对象保留但虚化追踪**：原有的实体台面对象（如 `MaterialPlate`、`MagazineHolder` 各类型及其对应的洞位坐标）**仍然保留并使用**。保留它们是为了给机器臂提供基础的物理空间取放标定，以及作为前端页面的可视和可交互区块。
-*   **内部物料免追踪**：既然余量完全由寄存器接管，**我们将不再在这些弹夹或洞位内部显式生成、塞入和追踪每一个具体的极片或外壳对象 (如 `ElectrodeSheet` 等)**。这恰好与我们的重构主旨（不主动在 `__init__` 建子物料以避开反序列化冲突）完美结合，进一步极大地减轻了后台资源树对象的复杂度。
-*   **监控方式变更**：放弃现有的物料余量方式，直接读取依华扣电组装工站开放的寄存器地址以获取准确余量。
-*   **前端界面集成**：在前端界面点击负极壳、弹垫片等弹夹的 data view 时，直接读取并显示寄存器中的各自余量。
-*   **新增寄存器映射** (参考 `coin_cell_assembly_b.csv`)：
-    *   `10mm正极片剩余物料数量（R）`：`read hold_register 520` (REAL)
-    *   `12mm正极片剩余物料数量（R）`：`read hold_register 522` (REAL)
-    *   `16mm正极片剩余物料数量（R）`：`read hold_register 524` (REAL)
-    *   `铝箔剩余物料数量（R）`：`read hold_register 526` (REAL)
-    *   `正极壳剩余物料数量（R）`：`read hold_register 528` (REAL)
-    *   `平垫剩余物料数量（R）`：`read hold_register 530` (REAL)
-    *   `负极壳剩余物料数量（R）`：`read hold_register 532` (REAL)
-    *   `弹垫剩余物料数量（R）`：`read hold_register 534` (REAL)
-    *   `成品电池剩余可容纳数量（R）`：`read hold_register 536` (REAL)
-    *   `成品电池NG槽剩余可容纳数量（R）`：`read hold_register 538` (REAL)
-
-### [配置] JSON 配置文件 (Configuration Files)
-#### [修改] 资源类型名称更新
-*   更新以下配置文件，将其中的 `BIOYOND_YB_Deck` 替换为新的类名 **`BioyondElectrolyteDeck`**，以及将 `coin_cell_deck` 替换为 **`YihuaCoinCellDeck`**：
-    *   `yibin_electrolyte_config.json`
-    *   `yibin_coin_cell_only_config.json`
-    *   `yibin_electrolyte_only_config.json`
-
-## 验证计划
-
-### 自动化测试
-*   对重构后的类运行 `pylabrobot` 序列化/反序列化测试，确保状态能够完美恢复。
-*   检查各工作站节点启动时是否仍存在 `ValueError: Resource '...' already assigned to deck` 报错。
-*   检查 `resource_tracker` 中是否仍存在重复 UUID 报错。
-
-### 手动验证
-*   重启各工作站节点，验证资源树是否能根据数据库数据正确还还原。
-*   验证“自动”与“手动”传输窗资源在台面上的分配是否正确。

unilabos/devices/workstation/implementation_plan_v2.md

@@ -1,388 +0,0 @@
-# 物料系统标准化重构方案 v2（增强版）
-
-> **基于原始方案 (`implementation_plan.md`) 的补充与细化**。
-> 本文档在原方案基础上：①增加当前代码现状核查结果；②明确各任务的执行顺序与文件级改动；③新增注意事项与回归测试命令。
-
----
-
-## 0. 核心原则（保持不变）
-
-"**物理几何结构初始化（Deck / Carrier / Magazine 的 `__init__`）与物料内容物填充（`setup()` / `klasses` 参数）必须彻底解耦**"，以消除 PLR 反序列化时的 `Resource already assigned to deck` 错误。
-
----
-
-## 1. 当前代码现状核查（2026-03-12）
-
-| 文件 | 计划要求 | 当前状态 | 是否完成 |
-|---|---|---|---|
-| `resources/bioyond/decks.py` | 重命名类；移除 `setup` 参数和 `deserialize` 补丁 | 仍是 `BIOYOND_YB_Deck`；`setup` 参数和 `deserialize` 均存在 | ❌ |
-| `coin_cell_assembly/YB_YH_materials.py` | 重命名类；文件迁移；移除补丁 | 仍是 `CoincellDeck`；`setup` 参数和 `deserialize` 均存在 | ❌ |
-| `resources/battery/magazine.py` | `magazine_factory` 不主动填充物料 | `MagazineHolder_6_Cathode` / `_6_Anode` / `_4_Cathode` 仍传 `klasses`，初始化时填满极片 | ❌ |
-| `resources/battery/bottle_carriers.py` | `YIHUA_Electrolyte_12VialCarrier` 初始化时不填充瓶子 | 第 54-55 行仍循环填充 12 个 `YB_pei_ye_xiao_Bottle` | ❌ |
-| `resources/itemized_carrier.py` | 移除 `idx is None` 兜底补丁 | 第 182-190 行仍保留该兜底逻辑 | ❌（待前置任务完成后移除） |
-| `resources/resource_tracker.py` | `load_all_state` 前预填 `Container` 缺失键 | 第 616 行直接调用，无预处理 | ❌ |
-| `bioyond_cell_workstation.py` | 修正跨站转运目标为合法接驳槽 | 第 1563 行仍 `sites=["electrolyte_buffer"]`，目标 UUID 为硬编码虚拟资源 | ❌ |
-| `yibin_*.json` 配置文件 | 更新类名 | 仍使用 `BIOYOND_YB_Deck` / `CoincellDeck` | ❌ |
-| `registry/resources/bioyond/deck.yaml` | 更新类名（原计划未提及） | 仍使用 `BIOYOND_YB_Deck` / `CoincellDeck` | ❌（**新增**） |
-
----
-
-## 2. 执行顺序（含依赖关系）
-
-```
-阶段 A（底层资源类）
-  A1. magazine.py — 移除 klasses 填充
-  A2. bottle_carriers.py — 移除瓶子填充
-  
-阶段 B（Deck 层）
-  B1. decks.py — 移除 setup 参数和 deserialize 补丁；重命名
-  B2. YB_YH_materials.py → 重命名；移除 CoincellDeck 的 setup 参数和 deserialize 补丁
-  
-阶段 C（状态兼容）
-  C1. resource_tracker.py — 预填 Container 缺失键
-  C2. itemized_carrier.py — 移除 idx is None 兜底补丁（B 阶段完成后）
-  
-阶段 D（跨站转运修复）
-  D1. YB_YH_materials.py 新增 vial_plate_dock（接驳专用槽）
-  D2. bioyond_cell_workstation.py 修正 transfer 目标
-  
-阶段 E（配置与注册表）
-  E1. yibin_*.json 更新类名
-  E2. registry/resources/bioyond/deck.yaml 更新类名
-  E3. coin_cell_assembly.py 更新导入路径（若文件重命名）
-```
-
----
-
-## 3. 分阶段详细说明
-
----
-
-### 阶段 A — 底层资源类
-
-#### A1. `unilabos/resources/battery/magazine.py`
-
-**问题**：`MagazineHolder_6_Cathode`、`MagazineHolder_6_Anode`、`MagazineHolder_4_Cathode` 在调用 `magazine_factory` 时传入 `klasses`，导致每次 `__init__` 就填满极片，反序列化时重复添加。
-
-**修改**：
-
-- 将三个函数中的 `klasses=[...]` 改为 `klasses=None`（与 `MagazineHolder_6_Battery` 保持一致）。
-- **理由**：物料余量已由寄存器管理（见阶段 F），不需要在资源树中追踪每一个极片。
-
-```python
-# 修改前（MagazineHolder_6_Cathode 举例）
-klasses=[FlatWasher, PositiveCan, PositiveCan, FlatWasher, PositiveCan, PositiveCan],
-
-# 修改后
-klasses=None,
-```
-
-> **注意**：`magazine_factory` 中 `klasses` 参数及循环体代码保留（仍可按需在非序列化场景使用），只是各具体工厂函数不再传入。
-
----
-
-#### A2. `unilabos/resources/battery/bottle_carriers.py`
-
-**问题**：`YIHUA_Electrolyte_12VialCarrier` 第 54-55 行在工厂函数末尾循环填充 12 个瓶子。
-
-**修改**：删除以下两行：
-
-```python
-# 删除
-for i in range(12):
-    carrier[i] = YB_pei_ye_xiao_Bottle(f"{name}_vial_{i+1}")
-```
-
-**理由**：`bottle_rack_6x2` 和 `bottle_rack_6x2_2` 均应初始化为空，瓶子由 Bioyond 侧实际转运后再填入。
-
----
-
-### 阶段 B — Deck 层重构
-
-#### B1. `unilabos/resources/bioyond/decks.py`
-
-**改动列表**：
-
-1. **重命名** `BIOYOND_YB_Deck` → `BioyondElectrolyteDeck`
-2. **重命名** `YB_Deck()` 工厂函数 → `bioyond_electrolyte_deck()`
-3. **移除** `__init__` 中的 `setup: bool = False` 参数及 `if setup: self.setup()` 调用
-4. **删除** `deserialize` 方法重写（该临时补丁在 `setup` 参数移除后自然失效，继续保留反而掩盖问题）
-5. `BIOYOND_PolymerReactionStation_Deck` 和 `BIOYOND_PolymerPreparationStation_Deck` 同步执行第 3、4 步
-
-**重构后初始化模式**：
-
-```python
-class BioyondElectrolyteDeck(Deck):
-    def __init__(self, name: str = "YB_Deck", ...):
-        super().__init__(name=name, ...)
-        # ❌ 不调用 self.setup()
-        # PLR 反序列化时只会调用 __init__，然后从 children JSON 重建子资源
-
-    def setup(self) -> None:
-        # 完整的子资源初始化逻辑保留在这里，只由工厂函数调用
-        ...
-
-def bioyond_electrolyte_deck(name: str) -> BioyondElectrolyteDeck:
-    deck = BioyondElectrolyteDeck(name=name)
-    deck.setup()   # ✅ 工厂函数负责填充
-    return deck
-```
-
-**同步修改**：
-- `bioyond_cell_workstation.py` 第 20 行：
-  ```python
-  # 修改前
-  from unilabos.resources.bioyond.decks import BIOYOND_YB_Deck
-  # 修改后
-  from unilabos.resources.bioyond.decks import BioyondElectrolyteDeck
-  ```
-- 同文件第 2440 行：`BIOYOND_YB_Deck(setup=True)` → `bioyond_electrolyte_deck(name="YB_Deck")`
-
----
-
-#### B2. `unilabos/devices/workstation/coin_cell_assembly/YB_YH_materials.py`
-
-**改动列表**：
-
-1. **重命名** `CoincellDeck` → `YihuaCoinCellDeck`
-2. **重命名** `YH_Deck()` → `yihua_coin_cell_deck()`（可保留 `YH_Deck` 作为兼容别名，日后废弃）
-3. **移除** `CoincellDeck.__init__` 中 `setup: bool = False` 参数及调用
-4. **删除** `CoincellDeck.deserialize` 重写方法
-5. `MaterialPlate.__init__` 中移除 `fill` 参数，始终不主动调用 `create_ordered_items_2d`（当前 `fill=False` 路径已正确，只需删除 `fill=True` 分支）
-
-```python
-# 修改前（MaterialPlate.__init__ 片段）
-if fill:
-    super().__init__(..., ordered_items=holes, ...)
-else:
-    super().__init__(..., ordered_items=ordered_items, ...)
-
-# 修改后（始终走 "不填充" 路径）
-super().__init__(..., ordered_items=ordered_items, ...)
-# holes 的创建代码整体移入独立工厂方法
-```
-
-**同步修改**：
-- `coin_cell_assembly.py` 第 20 行导入：
-  ```python
-  # 修改前
-  from unilabos.devices.workstation.coin_cell_assembly.YB_YH_materials import CoincellDeck
-  # 修改后
-  from unilabos.devices.workstation.coin_cell_assembly.YB_YH_materials import YihuaCoinCellDeck
-  ```
-- 同文件第 2245 行：`CoincellDeck(setup=True, name="coin_cell_deck")` → `yihua_coin_cell_deck(name="coin_cell_deck")`
-- 文件重命名（可选）：`YB_YH_materials.py` → `yihua_coin_cell_materials.py`（若重命名，所有 import 路径需全局替换）
-
----
-
-### 阶段 C — 状态兼容
-
-#### C1. `unilabos/resources/resource_tracker.py`
-
-**问题**：第 616 行直接调用 `plr_resource.load_all_state(all_states)`，若 `Container` 类资源的 `data` 字段缺少 `liquid_history` 或 `pending_liquids`，PLR 新版本会抛出 `KeyError`。
-
-**修改**：在第 616 行前插入预处理：
-
-```python
-# 在 load_all_state 调用前预填缺失键
-from pylabrobot.resources.container import Container as PLRContainer
-for res_name, state in all_states.items():
-    if state and isinstance(state, dict):
-        # Container 类型要求这两个键存在
-        state.setdefault("liquid_history", [])
-        state.setdefault("pending_liquids", {})
-
-plr_resource.load_all_state(all_states)
-```
-
----
-
-#### C2. `unilabos/resources/itemized_carrier.py`
-
-**前提**：B1、B2 阶段完成，Deck 类名与资源命名规范已对齐后再执行此步。
-
-**修改**：删除第 182-190 行的兜底补丁：
-
-```python
-# 删除以下整个 if 块
-if idx is None:
-    fallback_location = location if location is not None else Coordinate.zero()
-    super().assign_child_resource(resource, location=fallback_location, reassign=reassign)
-    return
-```
-
-**替代**：改为抛出带诊断信息的异常，便于后续问题排查：
-
-```python
-if idx is None:
-    raise ValueError(
-        f"[ItemizedCarrier] 无法为资源 '{resource.name}' 找到匹配的槽位。"
-        f"已知槽位：{list(self.child_locations.keys())}，"
-        f"传入坐标：{location}"
-    )
-```
-
----
-
-### 阶段 D — 跨站转运修复
-
-#### D1. `YB_YH_materials.py` — 新增分液瓶板接驳槽
-
-在 `YihuaCoinCellDeck.setup()` 中，新增一个专用于接收 Bioyond 侧传来的完整分液瓶板的 `ResourceStack`（或 `PlateSlot`）：
-
-```python
-# 在 setup() 末尾追加
-from pylabrobot.resources.resource_stack import ResourceStack
-
-vial_plate_dock = ResourceStack(
-    name="electrolyte_buffer",   # 保持与 bioyond_cell_workstation.py 的 sites 键一致
-    direction="z",
-    resources=[],
-)
-self.assign_child_resource(vial_plate_dock, Coordinate(x=1050.0, y=700.0, z=0))
-```
-
-> **说明**：槽位命名 `electrolyte_buffer` 与 `bioyond_cell_workstation.py` 现有的 `sites=["electrolyte_buffer"]` 对应，减少改动量。如改名，D2 需同步。
-
----
-
-#### D2. `bioyond_cell_workstation.py` — 修正 transfer 目标
-
-**问题**：第 1545-1552 行创建了一个 `size=1,1,1` 的虚拟 `ResourcePLR` 并硬编码 UUID，这个对象在 YihuaCoinCellDeck 的资源树中不存在，导致转移后资源树状态混乱。
-
-**修改**：
-
-```python
-# 修改前：创建虚拟目标资源
-target_resource_obj = ResourcePLR(name=target_location, size_x=1.0, ...)
-target_resource_obj.unilabos_uuid = "550e8400-e29b-41d4-a716-446655440001"  # 硬编码
-
-# 修改后：通过 ROS2/设备注册表查询真实资源
-# （需要从 target_device 的资源树中取出 electrolyte_buffer 的真实对象）
-target_resource_obj = self._get_resource_from_device(
-    device_id=target_device,
-    resource_name=target_location
-)
-if target_resource_obj is None:
-    raise RuntimeError(
-        f"目标设备 {target_device} 中未找到资源 '{target_location}'，"
-        f"请确认 YihuaCoinCellDeck.setup() 中已添加 electrolyte_buffer 槽位"
-    )
-```
-
-> **说明**：`_get_resource_from_device` 需根据现有 ROS2 资源同步机制实现，或复用已有的 `get_plr_resource_by_name` 类似方法。
-
----
-
-### 阶段 E — 配置与注册表
-
-#### E1. `yibin_electrolyte_config.json` / `yibin_coin_cell_only_config.json` / `yibin_electrolyte_only_config.json`
-
-全局替换以下字符串：
-
-| 旧值 | 新值 |
-|---|---|
-| `BIOYOND_YB_Deck` | `BioyondElectrolyteDeck` |
-| `unilabos.resources.bioyond.decks:BIOYOND_YB_Deck` | `unilabos.resources.bioyond.decks:BioyondElectrolyteDeck` |
-| `CoincellDeck` | `YihuaCoinCellDeck` |
-| `unilabos.devices.workstation.coin_cell_assembly.YB_YH_materials:CoincellDeck` | 若文件已重命名：`unilabos.devices.workstation.coin_cell_assembly.yihua_coin_cell_materials:YihuaCoinCellDeck` |
-
----
-
-#### E2. `unilabos/registry/resources/bioyond/deck.yaml`（**原计划未覆盖，新增**）
-
-当前第 25 行和第 37 行仍使用旧类名，需同步更新：
-
-```yaml
-# 修改前
-BIOYOND_YB_Deck:
-  ...
-CoincellDeck:
-  ...
-
-# 修改后
-BioyondElectrolyteDeck:
-  ...
-YihuaCoinCellDeck:
-  ...
-```
-
----
-
-### 阶段 F — 物料余量监控集成（原计划第5节细化）
-
-**目标**：弃用资源树内极片对象计数，改为直读依华扣电工站寄存器。
-
-#### F1. `coin_cell_assembly/coin_cell_assembly.py` — 新增寄存器读取方法
-
-参考 `coin_cell_assembly_b.csv` 中的地址，封装读取工具方法：
-
-```python
-MATERIAL_REGISTER_MAP = {
-    "10mm正极片":   (520, "REAL"),
-    "12mm正极片":   (522, "REAL"),
-    "16mm正极片":   (524, "REAL"),
-    "铝箔":         (526, "REAL"),
-    "正极壳":       (528, "REAL"),
-    "平垫":         (530, "REAL"),
-    "负极壳":       (532, "REAL"),
-    "弹垫":         (534, "REAL"),
-    "成品容量":     (536, "REAL"),
-    "成品NG容量":   (538, "REAL"),
-}
-
-def get_material_remaining(self, material_name: str) -> float:
-    """通过寄存器直读指定物料的剩余数量"""
-    if material_name not in MATERIAL_REGISTER_MAP:
-        raise KeyError(f"未知物料名称: {material_name}")
-    address, dtype = MATERIAL_REGISTER_MAP[material_name]
-    return self.read_hold_register(address, dtype)  # 复用现有 Modbus 读取方法
-```
-
-#### F2. 前端 data view 集成
-
-- 前端点击 `MagazineHolder` 类资源的 data view 时，调用后端 `get_material_remaining` 接口（而非读取 `children` 长度）。
-- 具体接口路径和前端调用代码需与前端开发同步，本文档不作具体实现约定。
-
----
-
-## 4. 验证计划（细化）
-
-### 4.1 单元测试（自动化）
-
-```bash
-# 序列化/反序列化往返测试
-python -m pytest unilabos/test/ -k "serial" -v
-
-# 特别检查以下错误消失：
-# - ValueError: Resource '...' already assigned to deck
-# - KeyError: 'liquid_history' 
-# - 重复 UUID 报错
-```
-
-### 4.2 集成测试（手动）
-
-按以下顺序逐步验证，确保每步正常后再进行下一步：
-
-1. **单独启动 `BatteryStation` 节点**，检查 `CoincellDeck`（现 `YihuaCoinCellDeck`）能否从数据库状态正确还原，无 `already assigned` 报错。
-2. **单独启动 `BioyondElectrolyte` 节点**，检查 `BioyondElectrolyteDeck` 反序列化正常。
-3. **同时启动两个节点**，模拟执行一次分液→扣电的完整跨站转运，确认：
-   - `electrolyte_buffer` 槽位正确接收分液瓶板。
-   - `bottle_rack_6x2` 初始为空，不出现虚拟瓶子。
-4. **重启两个节点**（模拟断电恢复），确认资源树从数据库还原后，`electrolyte_buffer` 中仍持有正确的分液瓶板对象。
-5. **寄存器余量读取**：手动触发 `get_material_remaining("负极壳")`，确认返回值与设备显示一致。
-
----
-
-## 5. 与原计划的差异对照
-
-| 维度 | 原计划 | 本文档新增/修订 |
-|---|---|---|
-| 执行顺序 | 未排序 | 明确 A→B→C→D→E→F 的依赖顺序 |
-| `itemized_carrier.py` | 移除兜底补丁 | 补充：替换为带诊断信息的异常，便于排查 |
-| `bottle_carriers.py` | 提及 `YIHUA_Electrolyte_12VialCarrier` 需修改 | 明确：删除第 54-55 行的瓶子填充循环 |
-| `MaterialPlate` | 提及移除 `fill` 参数 | 说明保留 `fill=False` 路径；整体删除 `fill=True` 分支 |
-| `deck.yaml` | 未提及 | **新增**：该注册文件也需要同步更新类名 |
-| `resource_tracker.py` | 简略描述 | 提供具体的 `setdefault` 预处理代码示例 |
-| 跨站转运 | 描述了问题和方向 | 细化：新增 `electrolyte_buffer` 槽位的具体名称和坐标；修正 `transfer` 目标查找方式 |
-| 验证计划 | 简述目标 | 提供具体测试命令和逐步手动验证流程 |

unilabos/devices/workstation/workstation_base.py

@@ -197,6 +197,28 @@ class WorkstationBase(ABC):
         self._ros_node = workstation_node
         logger.info(f"工作站 {self._ros_node.device_id} 关联协议节点")
 
+    # ============ 物料转运回调 ============
+
+    def resource_tree_batch_transfer(
+        self,
+        transfers: list,
+        old_parents: list,
+        new_parents: list,
+    ) -> None:
+        """批量物料转运完成后的回调，供子类重写
+
+        默认实现：逐个调用 resource_tree_transfer（如存在）。
+
+        Args:
+            transfers: 转移列表，每项包含 resource, from_parent, to_parent, to_site 等
+            old_parents: 每个物料转移前的原父节点
+            new_parents: 每个物料转移后的新父节点
+        """
+        func = getattr(self, "resource_tree_transfer", None)
+        if callable(func):
+            for t, old_parent, new_parent in zip(transfers, old_parents, new_parents):
+                func(old_parent, t["resource"], new_parent)
+
     # ============ 设备操作接口 ============
 
     def call_device_method(self, method: str, *args, **kwargs) -> Any:

unilabos/messages/__init__.py

@@ -217,6 +217,24 @@ class AGVTransferProtocol(BaseModel):
     from_repo_position: str
     to_repo_position: str
 
+
+class BatchTransferItem(BaseModel):
+    """批量转运中的单个物料条目"""
+    resource_uuid: str = ""
+    resource_id: str = ""
+    from_position: str
+    to_position: str
+
+
+class BatchTransferProtocol(BaseModel):
+    """批量物料转运协议 — 支持多物料一次性从来源工站转运到目标工站"""
+    from_repo: dict
+    to_repo: dict
+    transfer_resources: list  # list[Resource dict]，被转运的物料
+    from_positions: list      # list[str]，来源 slot 位置（与 transfer_resources 平行）
+    to_positions: list        # list[str]，目标 slot 位置（与 transfer_resources 平行）
+
+
 #=============新添加的新的协议================
 class AddProtocol(BaseModel):
     vessel: dict
@@ -629,15 +647,16 @@ class HydrogenateProtocol(BaseModel):
     vessel: dict = Field(..., description="反应容器")
 
 __all__ = [
-    "Point3D", "PumpTransferProtocol", "CleanProtocol", "SeparateProtocol", 
-    "EvaporateProtocol", "EvacuateAndRefillProtocol", "AGVTransferProtocol", 
-    "CentrifugeProtocol", "AddProtocol", "FilterProtocol", 
+    "Point3D", "PumpTransferProtocol", "CleanProtocol", "SeparateProtocol",
+    "EvaporateProtocol", "EvacuateAndRefillProtocol", "AGVTransferProtocol",
+    "BatchTransferItem", "BatchTransferProtocol",
+    "CentrifugeProtocol", "AddProtocol", "FilterProtocol",
     "HeatChillProtocol",
     "HeatChillStartProtocol", "HeatChillStopProtocol",
-    "StirProtocol", "StartStirProtocol", "StopStirProtocol", 
-    "TransferProtocol", "CleanVesselProtocol", "DissolveProtocol", 
+    "StirProtocol", "StartStirProtocol", "StopStirProtocol",
+    "TransferProtocol", "CleanVesselProtocol", "DissolveProtocol",
     "FilterThroughProtocol", "RunColumnProtocol", "WashSolidProtocol",
-    "AdjustPHProtocol", "ResetHandlingProtocol", "DryProtocol", 
+    "AdjustPHProtocol", "ResetHandlingProtocol", "DryProtocol",
     "RecrystallizeProtocol", "HydrogenateProtocol"
 ]
 # End Protocols

unilabos/registry/ast_registry_scanner.py

@@ -825,7 +825,6 @@ def _extract_class_body(
             action_args.setdefault("placeholder_keys", {})
             action_args.setdefault("always_free", False)
             action_args.setdefault("is_protocol", False)
-            action_args.setdefault("feedback_interval", 1.0)
             action_args.setdefault("description", "")
             action_args.setdefault("auto_prefix", False)
             action_args.setdefault("parent", False)

unilabos/registry/decorators.py

@@ -343,7 +343,6 @@ def action(
     auto_prefix: bool = False,
     parent: bool = False,
     node_type: Optional["NodeType"] = None,
-    feedback_interval: Optional[float] = None,
 ):
     """
     动作方法装饰器
@@ -379,16 +378,9 @@ def action(
     """
 
     def decorator(func: F) -> F:
-        import asyncio as _asyncio
-
-        if _asyncio.iscoroutinefunction(func):
-            @wraps(func)
-            async def wrapper(*args, **kwargs):
-                return await func(*args, **kwargs)
-        else:
-            @wraps(func)
-            def wrapper(*args, **kwargs):
-                return func(*args, **kwargs)
+        @wraps(func)
+        def wrapper(*args, **kwargs):
+            return func(*args, **kwargs)
 
         # action_type 为哨兵值 => 用户没传, 视为 None (UniLabJsonCommand)
         resolved_type = None if action_type is _ACTION_TYPE_UNSET else action_type
@@ -407,8 +399,6 @@ def action(
             "auto_prefix": auto_prefix,
             "parent": parent,
         }
-        if feedback_interval is not None:
-            meta["feedback_interval"] = feedback_interval
         if node_type is not None:
             meta["node_type"] = node_type.value if isinstance(node_type, NodeType) else str(node_type)
         wrapper._action_registry_meta = meta  # type: ignore[attr-defined]

unilabos/registry/devices/coin_cell_workstation.yaml

@@ -64,12 +64,59 @@ coincellassemblyworkstation_device:
               properties: {}
               required: []
               type: object
-            result: {}
+            result:
+              type: boolean
           required:
           - goal
           title: fun_wuliao_test参数
           type: object
         type: UniLabJsonCommand
+      auto-func_allpack_cmd:
+        feedback: {}
+        goal: {}
+        goal_default:
+          assembly_pressure: 4200
+          assembly_type: 7
+          elec_num: null
+          elec_use_num: null
+          elec_vol: 50
+          file_path: /Users/sml/work
+        handles: {}
+        placeholder_keys: {}
+        result: {}
+        schema:
+          description: ''
+          properties:
+            feedback: {}
+            goal:
+              properties:
+                assembly_pressure:
+                  default: 4200
+                  type: integer
+                assembly_type:
+                  default: 7
+                  type: integer
+                elec_num:
+                  type: string
+                elec_use_num:
+                  type: string
+                elec_vol:
+                  default: 50
+                  type: integer
+                file_path:
+                  default: /Users/sml/work
+                  type: string
+              required:
+              - elec_num
+              - elec_use_num
+              type: object
+            result:
+              type: object
+          required:
+          - goal
+          title: func_allpack_cmd参数
+          type: object
+        type: UniLabJsonCommand
       auto-func_allpack_cmd_simp:
         feedback: {}
         goal: {}
@@ -102,7 +149,7 @@ coincellassemblyworkstation_device:
             goal:
               properties:
                 assembly_pressure:
-                  default: 3200
+                  default: 4200
                   description: 电池压制力(N)
                   type: integer
                 assembly_type:
@@ -118,7 +165,7 @@ coincellassemblyworkstation_device:
                   description: 是否启用压力模式
                   type: boolean
                 dual_drop_first_volume:
-                  default: 0
+                  default: 25
                   description: 二次滴液第一次排液体积(μL)
                   type: integer
                 dual_drop_mode:
@@ -137,7 +184,6 @@ coincellassemblyworkstation_device:
                   description: 电解液瓶数
                   type: string
                 elec_use_num:
-                  default: 5
                   description: 每瓶电解液组装电池数
                   type: string
                 elec_vol:
@@ -145,7 +191,7 @@ coincellassemblyworkstation_device:
                   description: 电解液吸液量(μL)
                   type: integer
                 file_path:
-                  default: D:\UniLabdev\Uni-Lab-OS\unilabos\devices\workstation\coin_cell_assembly
+                  default: /Users/sml/work
                   description: 实验记录保存路径
                   type: string
                 fujipian_juzhendianwei:
@@ -176,7 +222,8 @@ coincellassemblyworkstation_device:
               - elec_num
               - elec_use_num
               type: object
-            result: {}
+            result:
+              type: object
           required:
           - goal
           title: func_allpack_cmd_simp参数
@@ -265,7 +312,8 @@ coincellassemblyworkstation_device:
                   type: boolean
               required: []
               type: object
-            result: {}
+            result:
+              type: boolean
           required:
           - goal
           title: func_pack_device_init_auto_start_combined参数
@@ -307,7 +355,8 @@ coincellassemblyworkstation_device:
               properties: {}
               required: []
               type: object
-            result: {}
+            result:
+              type: boolean
           required:
           - goal
           title: func_pack_device_stop参数
@@ -332,7 +381,8 @@ coincellassemblyworkstation_device:
                   type: string
               required: []
               type: object
-            result: {}
+            result:
+              type: boolean
           required:
           - goal
           title: func_pack_get_msg_cmd参数
@@ -346,10 +396,12 @@ coincellassemblyworkstation_device:
         handles:
           input:
           - data_key: bottle_num
-            data_source: handle
+            data_source: workflow
             data_type: integer
             handler_key: bottle_count
+            io_type: source
             label: 配液瓶数
+            required: true
         placeholder_keys: {}
         result: {}
         schema:
@@ -384,7 +436,8 @@ coincellassemblyworkstation_device:
               properties: {}
               required: []
               type: object
-            result: {}
+            result:
+              type: boolean
           required:
           - goal
           title: func_pack_send_finished_cmd参数
@@ -421,7 +474,8 @@ coincellassemblyworkstation_device:
               - assembly_type
               - assembly_pressure
               type: object
-            result: {}
+            result:
+              type: boolean
           required:
           - goal
           title: func_pack_send_msg_cmd参数
@@ -477,21 +531,12 @@ coincellassemblyworkstation_device:
         handles:
           input:
           - data_key: elec_num
-            data_source: handle
+            data_source: workflow
             data_type: integer
             handler_key: bottle_count
+            io_type: source
             label: 配液瓶数
-          - data_key: formulations
-            data_source: handle
-            data_type: array
-            handler_key: formulations_input
-            label: 配方信息列表
-          output:
-          - data_key: assembly_data
-            data_source: executor
-            data_type: array
-            handler_key: assembly_data_output
-            label: 扣电组装数据列表
+            required: true
         placeholder_keys: {}
         result: {}
         schema:
@@ -574,7 +619,8 @@ coincellassemblyworkstation_device:
               - elec_num
               - elec_use_num
               type: object
-            result: {}
+            result:
+              type: object
           required:
           - goal
           title: func_sendbottle_allpack_multi参数
@@ -626,31 +672,6 @@ coincellassemblyworkstation_device:
           title: modify_deck_name参数
           type: object
         type: UniLabJsonCommand
-      auto-post_init:
-        feedback: {}
-        goal: {}
-        goal_default:
-          ros_node: null
-        handles: {}
-        placeholder_keys: {}
-        result: {}
-        schema:
-          description: ''
-          properties:
-            feedback: {}
-            goal:
-              properties:
-                ros_node:
-                  type: object
-              required:
-              - ros_node
-              type: object
-            result: {}
-          required:
-          - goal
-          title: post_init参数
-          type: object
-        type: UniLabJsonCommand
       auto-qiming_coin_cell_code:
         feedback: {}
         goal: {}
@@ -698,7 +719,8 @@ coincellassemblyworkstation_device:
               required:
               - fujipian_panshu
               type: object
-            result: {}
+            result:
+              type: boolean
           required:
           - goal
           title: qiming_coin_cell_code参数
@@ -706,10 +728,6 @@ coincellassemblyworkstation_device:
         type: UniLabJsonCommand
     module: unilabos.devices.workstation.coin_cell_assembly.coin_cell_assembly:CoinCellAssemblyWorkstation
     status_types:
-      data_10mm_positive_plate_remaining: float
-      data_12mm_positive_plate_remaining: float
-      data_16mm_positive_plate_remaining: float
-      data_aluminum_foil_remaining: float
       data_assembly_coin_cell_num: int
       data_assembly_pressure: int
       data_assembly_time: float
@@ -717,22 +735,14 @@ coincellassemblyworkstation_device:
       data_axis_y_pos: float
       data_axis_z_pos: float
       data_coin_cell_code: str
-      data_coin_type: int
-      data_current_assembling_count: int
-      data_current_completed_count: int
+      data_coin_num: int
       data_electrolyte_code: str
       data_electrolyte_volume: int
-      data_finished_battery_ng_remaining_capacity: float
-      data_finished_battery_remaining_capacity: float
-      data_flat_washer_remaining: float
       data_glove_box_o2_content: float
       data_glove_box_pressure: float
       data_glove_box_water_content: float
-      data_negative_shell_remaining: float
       data_open_circuit_voltage: float
       data_pole_weight: float
-      data_positive_shell_remaining: float
-      data_spring_washer_remaining: float
       request_rec_msg_status: bool
       request_send_msg_status: bool
       sys_mode: str
@@ -762,14 +772,6 @@ coincellassemblyworkstation_device:
       type: object
     data:
       properties:
-        data_10mm_positive_plate_remaining:
-          type: number
-        data_12mm_positive_plate_remaining:
-          type: number
-        data_16mm_positive_plate_remaining:
-          type: number
-        data_aluminum_foil_remaining:
-          type: number
         data_assembly_coin_cell_num:
           type: integer
         data_assembly_pressure:
@@ -784,38 +786,22 @@ coincellassemblyworkstation_device:
           type: number
         data_coin_cell_code:
           type: string
-        data_coin_type:
-          type: integer
-        data_current_assembling_count:
-          type: integer
-        data_current_completed_count:
+        data_coin_num:
           type: integer
         data_electrolyte_code:
           type: string
         data_electrolyte_volume:
           type: integer
-        data_finished_battery_ng_remaining_capacity:
-          type: number
-        data_finished_battery_remaining_capacity:
-          type: number
-        data_flat_washer_remaining:
-          type: number
         data_glove_box_o2_content:
           type: number
         data_glove_box_pressure:
           type: number
         data_glove_box_water_content:
           type: number
-        data_negative_shell_remaining:
-          type: number
         data_open_circuit_voltage:
           type: number
         data_pole_weight:
           type: number
-        data_positive_shell_remaining:
-          type: number
-        data_spring_washer_remaining:
-          type: number
         request_rec_msg_status:
           type: boolean
         request_send_msg_status:
@@ -825,36 +811,24 @@ coincellassemblyworkstation_device:
         sys_status:
           type: string
       required:
-      - sys_status
-      - sys_mode
-      - request_rec_msg_status
-      - request_send_msg_status
       - data_assembly_coin_cell_num
-      - data_open_circuit_voltage
+      - data_assembly_pressure
+      - data_assembly_time
       - data_axis_x_pos
       - data_axis_y_pos
       - data_axis_z_pos
-      - data_pole_weight
-      - data_assembly_pressure
-      - data_electrolyte_volume
-      - data_coin_type
-      - data_current_assembling_count
-      - data_current_completed_count
       - data_coin_cell_code
+      - data_coin_num
       - data_electrolyte_code
-      - data_glove_box_pressure
+      - data_electrolyte_volume
       - data_glove_box_o2_content
+      - data_glove_box_pressure
       - data_glove_box_water_content
-      - data_10mm_positive_plate_remaining
-      - data_12mm_positive_plate_remaining
-      - data_16mm_positive_plate_remaining
-      - data_aluminum_foil_remaining
-      - data_positive_shell_remaining
-      - data_flat_washer_remaining
-      - data_negative_shell_remaining
-      - data_spring_washer_remaining
-      - data_finished_battery_remaining_capacity
-      - data_finished_battery_ng_remaining_capacity
+      - data_open_circuit_voltage
+      - data_pole_weight
+      - request_rec_msg_status
+      - request_send_msg_status
+      - sys_mode
+      - sys_status
       type: object
-  registry_type: device
   version: 1.0.0

unilabos/registry/devices/hotel.yaml

@@ -31,6 +31,6 @@ hotel.thermo_orbitor_rs2_hotel:
       type: object
   model:
     mesh: thermo_orbitor_rs2_hotel
-    path: https://leap-lab.oss-cn-zhangjiakou.aliyuncs.com/uni-lab/devices/thermo_orbitor_rs2_hotel/macro_device.xacro
+    path: https://uni-lab.oss-cn-zhangjiakou.aliyuncs.com/uni-lab/devices/thermo_orbitor_rs2_hotel/macro_device.xacro
     type: device
   version: 1.0.0

unilabos/registry/devices/robot_arm.yaml

@@ -329,7 +329,7 @@ robotic_arm.SCARA_with_slider.moveit.virtual:
       type: object
   model:
     mesh: arm_slider
-    path: https://leap-lab.oss-cn-zhangjiakou.aliyuncs.com/uni-lab/devices/arm_slider/macro_device.xacro
+    path: https://uni-lab.oss-cn-zhangjiakou.aliyuncs.com/uni-lab/devices/arm_slider/macro_device.xacro
     type: device
   version: 1.0.0
 robotic_arm.UR:

unilabos/registry/devices/transport_agv.yaml

@@ -0,0 +1,368 @@
+agv_transport_station:
+  category:
+  - work_station
+  - transport_agv
+  class:
+    action_value_mappings:
+      AGVTransferProtocol:
+        feedback: {}
+        goal:
+          from_repo: from_repo
+          from_repo_position: from_repo_position
+          to_repo: to_repo
+          to_repo_position: to_repo_position
+        goal_default:
+          from_repo:
+            category: ''
+            children: []
+            config: ''
+            data: ''
+            id: ''
+            name: ''
+            parent: ''
+            pose:
+              orientation:
+                w: 1.0
+                x: 0.0
+                y: 0.0
+                z: 0.0
+              position:
+                x: 0.0
+                y: 0.0
+                z: 0.0
+            sample_id: ''
+            type: ''
+          from_repo_position: ''
+          to_repo:
+            category: ''
+            children: []
+            config: ''
+            data: ''
+            id: ''
+            name: ''
+            parent: ''
+            pose:
+              orientation:
+                w: 1.0
+                x: 0.0
+                y: 0.0
+                z: 0.0
+              position:
+                x: 0.0
+                y: 0.0
+                z: 0.0
+            sample_id: ''
+            type: ''
+          to_repo_position: ''
+        handles: {}
+        result: {}
+        schema:
+          description: ''
+          properties:
+            feedback:
+              properties:
+                status:
+                  type: string
+              required:
+              - status
+              title: AGVTransfer_Feedback
+              type: object
+            goal:
+              properties:
+                from_repo:
+                  properties:
+                    category:
+                      type: string
+                    children:
+                      items:
+                        type: string
+                      type: array
+                    config:
+                      type: string
+                    data:
+                      type: string
+                    id:
+                      type: string
+                    name:
+                      type: string
+                    parent:
+                      type: string
+                    pose:
+                      properties:
+                        orientation:
+                          properties:
+                            w:
+                              type: number
+                            x:
+                              type: number
+                            y:
+                              type: number
+                            z:
+                              type: number
+                          required:
+                          - x
+                          - y
+                          - z
+                          - w
+                          title: orientation
+                          type: object
+                        position:
+                          properties:
+                            x:
+                              type: number
+                            y:
+                              type: number
+                            z:
+                              type: number
+                          required:
+                          - x
+                          - y
+                          - z
+                          title: position
+                          type: object
+                      required:
+                      - position
+                      - orientation
+                      title: pose
+                      type: object
+                    sample_id:
+                      type: string
+                    type:
+                      type: string
+                  required:
+                  - id
+                  - name
+                  - sample_id
+                  - children
+                  - parent
+                  - type
+                  - category
+                  - pose
+                  - config
+                  - data
+                  title: from_repo
+                  type: object
+                from_repo_position:
+                  type: string
+                to_repo:
+                  properties:
+                    category:
+                      type: string
+                    children:
+                      items:
+                        type: string
+                      type: array
+                    config:
+                      type: string
+                    data:
+                      type: string
+                    id:
+                      type: string
+                    name:
+                      type: string
+                    parent:
+                      type: string
+                    pose:
+                      properties:
+                        orientation:
+                          properties:
+                            w:
+                              type: number
+                            x:
+                              type: number
+                            y:
+                              type: number
+                            z:
+                              type: number
+                          required:
+                          - x
+                          - y
+                          - z
+                          - w
+                          title: orientation
+                          type: object
+                        position:
+                          properties:
+                            x:
+                              type: number
+                            y:
+                              type: number
+                            z:
+                              type: number
+                          required:
+                          - x
+                          - y
+                          - z
+                          title: position
+                          type: object
+                      required:
+                      - position
+                      - orientation
+                      title: pose
+                      type: object
+                    sample_id:
+                      type: string
+                    type:
+                      type: string
+                  required:
+                  - id
+                  - name
+                  - sample_id
+                  - children
+                  - parent
+                  - type
+                  - category
+                  - pose
+                  - config
+                  - data
+                  title: to_repo
+                  type: object
+                to_repo_position:
+                  type: string
+              required:
+              - from_repo
+              - from_repo_position
+              - to_repo
+              - to_repo_position
+              title: AGVTransfer_Goal
+              type: object
+            result:
+              properties:
+                return_info:
+                  type: string
+                success:
+                  type: boolean
+              required:
+              - return_info
+              - success
+              title: AGVTransfer_Result
+              type: object
+          required:
+          - goal
+          title: AGVTransfer
+          type: object
+        type: AGVTransfer
+      BatchTransferProtocol:
+        feedback: {}
+        goal:
+          from_positions: from_positions
+          from_repo: from_repo
+          to_positions: to_positions
+          to_repo: to_repo
+          transfer_resources: transfer_resources
+        goal_default:
+          from_positions: []
+          from_repo:
+            category: ''
+            children: []
+            config: ''
+            data: ''
+            id: ''
+            name: ''
+            parent: ''
+            pose:
+              orientation:
+                w: 1.0
+                x: 0.0
+                y: 0.0
+                z: 0.0
+              position:
+                x: 0.0
+                y: 0.0
+                z: 0.0
+            sample_id: ''
+            type: ''
+          to_positions: []
+          to_repo:
+            category: ''
+            children: []
+            config: ''
+            data: ''
+            id: ''
+            name: ''
+            parent: ''
+            pose:
+              orientation:
+                w: 1.0
+                x: 0.0
+                y: 0.0
+                z: 0.0
+              position:
+                x: 0.0
+                y: 0.0
+                z: 0.0
+            sample_id: ''
+            type: ''
+          transfer_resources: []
+        handles: {}
+        result: {}
+        schema:
+          description: AGV 批量物料转运协议
+          properties:
+            feedback: {}
+            goal:
+              properties:
+                from_positions:
+                  items:
+                    type: string
+                  type: array
+                from_repo:
+                  type: object
+                to_positions:
+                  items:
+                    type: string
+                  type: array
+                to_repo:
+                  type: object
+                transfer_resources:
+                  items:
+                    type: object
+                  type: array
+              required:
+              - from_repo
+              - to_repo
+              - transfer_resources
+              - from_positions
+              - to_positions
+              type: object
+            result: {}
+          required:
+          - goal
+          title: BatchTransferProtocol
+          type: object
+        type: BatchTransfer
+    module: unilabos.devices.transport.agv_workstation:AGVTransportStation
+    status_types:
+      agv_status: String
+      carrier_status: String
+    type: python
+  config_info: []
+  description: 通用 AGV 转运工站。继承 WorkstationBase，通过 Warehouse 子资源管理物料中转态。支持单物料和批量物料转运协议，路由表和子设备配置全部由
+    JSON 驱动。
+  handles: []
+  icon: ''
+  init_param_schema:
+    config:
+      properties:
+        device_roles:
+          properties:
+            arm:
+              type: string
+            navigator:
+              type: string
+          type: object
+        protocol_type:
+          items:
+            type: string
+          type: array
+        route_table:
+          type: object
+      type: object
+    data:
+      properties:
+        agv_status:
+          type: string
+        carrier_status:
+          type: string
+      type: object
+  version: 1.0.0

unilabos/registry/registry.py

@@ -238,7 +238,6 @@ class Registry:
                             "class_name": "unilabos_class",
                         },
                         "always_free": True,
-                        "feedback_interval": 300.0,
                     },
                     "test_latency": test_latency_action,
                     "auto-test_resource": test_resource_action,
@@ -830,9 +829,8 @@ class Registry:
             raw_handles = (action_args or {}).get("handles")
             handles = normalize_ast_action_handles(raw_handles) if isinstance(raw_handles, list) else (raw_handles or {})
 
-            # placeholder_keys: 先从参数类型自动检测，再用装饰器显式配置覆盖/补充
-            pk = detect_placeholder_keys(params)
-            pk.update((action_args or {}).get("placeholder_keys") or {})
+            # placeholder_keys: 优先用装饰器显式配置，否则从参数类型检测
+            pk = (action_args or {}).get("placeholder_keys") or detect_placeholder_keys(params)
 
             # 从方法返回值类型生成 result schema
             result_schema = None
@@ -854,8 +852,6 @@ class Registry:
             }
             if (action_args or {}).get("always_free") or method_info.get("always_free"):
                 entry["always_free"] = True
-            _fb_iv = (action_args or {}).get("feedback_interval", method_info.get("feedback_interval", 1.0))
-            entry["feedback_interval"] = _fb_iv
             nt = normalize_enum_value((action_args or {}).get("node_type"), NodeType)
             if nt:
                 entry["node_type"] = nt
@@ -979,12 +975,10 @@ class Registry:
                 "schema": schema,
                 "goal_default": goal_default,
                 "handles": handles,
-                "placeholder_keys": {**detect_placeholder_keys(method_params), **(action_args.get("placeholder_keys") or {})},
+                "placeholder_keys": action_args.get("placeholder_keys") or detect_placeholder_keys(method_params),
             }
             if action_args.get("always_free") or method_info.get("always_free"):
                 action_entry["always_free"] = True
-            _fb_iv = action_args.get("feedback_interval", method_info.get("feedback_interval", 1.0))
-            action_entry["feedback_interval"] = _fb_iv
             nt = normalize_enum_value(action_args.get("node_type"), NodeType)
             if nt:
                 action_entry["node_type"] = nt

unilabos/registry/resources/battery/bottle_carriers.yaml

@@ -1,12 +0,0 @@
-YIHUA_Electrolyte_12VialCarrier:
-  category:
-  - battery_bottle_carriers
-  class:
-    module: unilabos.resources.battery.bottle_carriers:YIHUA_Electrolyte_12VialCarrier
-    type: pylabrobot
-  description: YIHUA 12-vial electrolyte carrier for coin cell assembly workstation
-  handles: []
-  icon: ''
-  init_param_schema: {}
-  registry_type: resource
-  version: 1.0.0

unilabos/registry/resources/bioyond/YB_bottle.yaml

@@ -1,140 +1,84 @@
-YB_Vial_20mL:
+YB_20ml_fenyeping:
   category:
+  - yb3
   - YB_bottle
   class:
-    module: unilabos.resources.bioyond.YB_bottles:YB_Vial_20mL
+    module: unilabos.resources.bioyond.YB_bottles:YB_20ml_fenyeping
     type: pylabrobot
-  description: YB_Vial_20mL
+  description: YB_20ml_fenyeping
   handles: []
   icon: ''
   init_param_schema: {}
   version: 1.0.0
-YB_Vial_5mL:
+YB_5ml_fenyeping:
   category:
+  - yb3
   - YB_bottle
   class:
-    module: unilabos.resources.bioyond.YB_bottles:YB_Vial_5mL
+    module: unilabos.resources.bioyond.YB_bottles:YB_5ml_fenyeping
     type: pylabrobot
-  description: YB_Vial_5mL
+  description: YB_5ml_fenyeping
   handles: []
   icon: ''
   init_param_schema: {}
   version: 1.0.0
-YB_DosingHead_L:
+YB_jia_yang_tou_da:
   category:
+  - yb3
   - YB_bottle
   class:
-    module: unilabos.resources.bioyond.YB_bottles:YB_DosingHead_L
+    module: unilabos.resources.bioyond.YB_bottles:YB_jia_yang_tou_da
     type: pylabrobot
-  description: YB_DosingHead_L
+  description: YB_jia_yang_tou_da
   handles: []
   icon: ''
   init_param_schema: {}
   version: 1.0.0
-YB_PrepBottle_60mL:
+YB_pei_ye_da_Bottle:
   category:
+  - yb3
   - YB_bottle
   class:
-    module: unilabos.resources.bioyond.YB_bottles:YB_PrepBottle_60mL
+    module: unilabos.resources.bioyond.YB_bottles:YB_pei_ye_da_Bottle
     type: pylabrobot
-  description: YB_PrepBottle_60mL
+  description: YB_pei_ye_da_Bottle
   handles: []
   icon: ''
   init_param_schema: {}
   version: 1.0.0
-YB_PrepBottle_15mL:
+YB_pei_ye_xiao_Bottle:
   category:
+  - yb3
   - YB_bottle
   class:
-    module: unilabos.resources.bioyond.YB_bottles:YB_PrepBottle_15mL
+    module: unilabos.resources.bioyond.YB_bottles:YB_pei_ye_xiao_Bottle
     type: pylabrobot
-  description: YB_PrepBottle_15mL
+  description: YB_pei_ye_xiao_Bottle
   handles: []
   icon: ''
   init_param_schema: {}
   version: 1.0.0
-YB_Tip_5000uL:
+YB_qiang_tou:
   category:
+  - yb3
   - YB_bottle
   class:
-    module: unilabos.resources.bioyond.YB_bottles:YB_Tip_5000uL
+    module: unilabos.resources.bioyond.YB_bottles:YB_qiang_tou
     type: pylabrobot
-  description: YB_Tip_5000uL
+  description: YB_qiang_tou
   handles: []
   icon: ''
   init_param_schema: {}
   version: 1.0.0
-YB_Tip_1000uL:
-  category:
-  - YB_bottle
-  class:
-    module: unilabos.resources.bioyond.YB_bottles:YB_Tip_1000uL
-    type: pylabrobot
-  description: YB_Tip_1000uL
-  handles: []
-  icon: ''
-  init_param_schema: {}
-  registry_type: resource
-  version: 1.0.0
-YB_Tip_50uL:
-  category:
-  - YB_bottle
-  class:
-    module: unilabos.resources.bioyond.YB_bottles:YB_Tip_50uL
-    type: pylabrobot
-  description: YB_Tip_50uL
-  handles: []
-  icon: ''
-  init_param_schema: {}
-  registry_type: resource
-  version: 1.0.0
-YB_NormalLiq_250mL_Bottle:
+YB_ye_Bottle:
   category:
+  - yb3
   - YB_bottle_carriers
   - YB_bottle
   class:
-    module: unilabos.resources.bioyond.YB_bottles:YB_NormalLiq_250mL_Bottle
+    module: unilabos.resources.bioyond.YB_bottles:YB_ye_Bottle
     type: pylabrobot
-  description: YB_NormalLiq_250mL_Bottle
-  handles: []
-  icon: ''
-  init_param_schema: {}
-  registry_type: resource
-  version: 1.0.0
-YB_NormalLiq_100mL_Bottle:
-  category:
-  - YB_bottle_carriers
-  - YB_bottle
-  class:
-    module: unilabos.resources.bioyond.YB_bottles:YB_NormalLiq_100mL_Bottle
-    type: pylabrobot
-  description: YB_NormalLiq_100mL_Bottle
-  handles: []
-  icon: ''
-  init_param_schema: {}
-  registry_type: resource
-  version: 1.0.0
-YB_HighVis_250mL_Bottle:
-  category:
-  - YB_bottle_carriers
-  - YB_bottle
-  class:
-    module: unilabos.resources.bioyond.YB_bottles:YB_HighVis_250mL_Bottle
-    type: pylabrobot
-  description: YB_HighVis_250mL_Bottle
-  handles: []
-  icon: ''
-  init_param_schema: {}
-  registry_type: resource
-  version: 1.0.0
-YB_HighVis_100mL_Bottle:
-  category:
-  - YB_bottle_carriers
-  - YB_bottle
-  class:
-    module: unilabos.resources.bioyond.YB_bottles:YB_HighVis_100mL_Bottle
-    type: pylabrobot
-  description: YB_HighVis_100mL_Bottle
+  description: YB_ye_Bottle
   handles: []
   icon: ''
   init_param_schema: {}

unilabos/registry/resources/bioyond/YB_bottle_carriers.yaml

@@ -1,29 +1,42 @@
-YB_Vial_20mL_Carrier:
+YB_100ml_yeti:
   category:
+  - yb3
   - YB_bottle_carriers
   class:
-    module: unilabos.resources.bioyond.YB_bottle_carriers:YB_Vial_20mL_Carrier
+    module: unilabos.resources.bioyond.YB_bottle_carriers:YB_100ml_yeti
     type: pylabrobot
-  description: YB_Vial_20mL_Carrier
+  description: YB_100ml_yeti
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
-YB_Vial_5mL_Carrier:
+YB_20ml_fenyepingban:
   category:
+  - yb3
   - YB_bottle_carriers
   class:
-    module: unilabos.resources.bioyond.YB_bottle_carriers:YB_Vial_5mL_Carrier
+    module: unilabos.resources.bioyond.YB_bottle_carriers:YB_20ml_fenyepingban
     type: pylabrobot
-  description: YB_Vial_5mL_Carrier
+  description: YB_20ml_fenyepingban
+  handles: []
+  icon: ''
+  init_param_schema: {}
+  version: 1.0.0
+YB_5ml_fenyepingban:
+  category:
+  - yb3
+  - YB_bottle_carriers
+  class:
+    module: unilabos.resources.bioyond.YB_bottle_carriers:YB_5ml_fenyepingban
+    type: pylabrobot
+  description: YB_5ml_fenyepingban
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 YB_6StockCarrier:
   category:
+  - yb3
   - YB_bottle_carriers
   class:
     module: unilabos.resources.bioyond.YB_bottle_carriers:YB_6StockCarrier
@@ -32,10 +45,10 @@ YB_6StockCarrier:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
 YB_6VialCarrier:
   category:
+  - yb3
   - YB_bottle_carriers
   class:
     module: unilabos.resources.bioyond.YB_bottle_carriers:YB_6VialCarrier
@@ -44,137 +57,112 @@ YB_6VialCarrier:
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
-YB_DosingHead_L_Carrier:
+YB_gao_nian_ye_Bottle:
   category:
+  - yb3
   - YB_bottle_carriers
   class:
-    module: unilabos.resources.bioyond.YB_bottle_carriers:YB_DosingHead_L_Carrier
+    module: unilabos.resources.bioyond.YB_bottles:YB_gao_nian_ye_Bottle
     type: pylabrobot
-  description: YB_DosingHead_L_Carrier
+  description: YB_gao_nian_ye_Bottle
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
-YB_PrepBottle_60mL_Carrier:
+YB_gaonianye:
   category:
+  - yb3
   - YB_bottle_carriers
   class:
-    module: unilabos.resources.bioyond.YB_bottle_carriers:YB_PrepBottle_60mL_Carrier
+    module: unilabos.resources.bioyond.YB_bottle_carriers:YB_gaonianye
     type: pylabrobot
-  description: YB_PrepBottle_60mL_Carrier
+  description: YB_gaonianye
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
-YB_PrepBottle_15mL_Carrier:
+YB_jia_yang_tou_da_Carrier:
   category:
+  - yb3
   - YB_bottle_carriers
   class:
-    module: unilabos.resources.bioyond.YB_bottle_carriers:YB_PrepBottle_15mL_Carrier
+    module: unilabos.resources.bioyond.YB_bottle_carriers:YB_jia_yang_tou_da_Carrier
     type: pylabrobot
-  description: YB_PrepBottle_15mL_Carrier
+  description: YB_jia_yang_tou_da_Carrier
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
-YB_TipRack_Mixed:
+YB_peiyepingdaban:
   category:
+  - yb3
   - YB_bottle_carriers
   class:
-    module: unilabos.resources.bioyond.YB_bottle_carriers:YB_TipRack_Mixed
+    module: unilabos.resources.bioyond.YB_bottle_carriers:YB_peiyepingdaban
     type: pylabrobot
-  description: YB_TipRack_Mixed
+  description: YB_peiyepingdaban
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
-YB_TipRack_5000uL:
+YB_peiyepingxiaoban:
   category:
+  - yb3
   - YB_bottle_carriers
   class:
-    module: unilabos.resources.bioyond.YB_bottle_carriers:YB_TipRack_5000uL
+    module: unilabos.resources.bioyond.YB_bottle_carriers:YB_peiyepingxiaoban
     type: pylabrobot
-  description: YB_TipRack_5000uL
+  description: YB_peiyepingxiaoban
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
-YB_TipRack_50uL:
+YB_qiang_tou_he:
   category:
+  - yb3
   - YB_bottle_carriers
   class:
-    module: unilabos.resources.bioyond.YB_bottle_carriers:YB_TipRack_50uL
+    module: unilabos.resources.bioyond.YB_bottle_carriers:YB_qiang_tou_he
     type: pylabrobot
-  description: YB_TipRack_50uL
+  description: YB_qiang_tou_he
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
-YB_Adapter_60mL:
+YB_shi_pei_qi_kuai:
   category:
+  - yb3
   - YB_bottle_carriers
   class:
-    module: unilabos.resources.bioyond.YB_bottle_carriers:YB_Adapter_60mL
+    module: unilabos.resources.bioyond.YB_bottle_carriers:YB_shi_pei_qi_kuai
     type: pylabrobot
-  description: YB_Adapter_60mL
+  description: YB_shi_pei_qi_kuai
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
-YB_NormalLiq_250mL_Carrier:
+YB_ye:
   category:
+  - yb3
   - YB_bottle_carriers
   class:
-    module: unilabos.resources.bioyond.YB_bottle_carriers:YB_NormalLiq_250mL_Carrier
+    module: unilabos.resources.bioyond.YB_bottle_carriers:YB_ye
     type: pylabrobot
-  description: YB_NormalLiq_250mL_Carrier
+  description: YB_ye_Bottle_Carrier
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
-YB_NormalLiq_100mL_Carrier:
+YB_ye_100ml_Bottle:
   category:
+  - yb3
   - YB_bottle_carriers
   class:
-    module: unilabos.resources.bioyond.YB_bottle_carriers:YB_NormalLiq_100mL_Carrier
+    module: unilabos.resources.bioyond.YB_bottles:YB_ye_100ml_Bottle
     type: pylabrobot
-  description: YB_NormalLiq_100mL_Carrier
+  description: YB_ye_100ml_Bottle
   handles: []
   icon: ''
   init_param_schema: {}
-  registry_type: resource
   version: 1.0.0
-YB_HighVis_250mL_Carrier:
-  category:
-  - YB_bottle_carriers
-  class:
-    module: unilabos.resources.bioyond.YB_bottle_carriers:YB_HighVis_250mL_Carrier
-    type: pylabrobot
-  description: YB_HighVis_250mL_Carrier
-  handles: []
-  icon: ''
-  init_param_schema: {}
-  registry_type: resource
-  version: 1.0.0
-YB_HighVis_100mL_Carrier:
-  category:
-  - YB_bottle_carriers
-  class:
-    module: unilabos.resources.bioyond.YB_bottle_carriers:YB_HighVis_100mL_Carrier
-    type: pylabrobot
-  description: YB_HighVis_100mL_Carrier
-  handles: []
-  icon: ''
-  init_param_schema: {}
-  registry_type: resource
-  version: 1.0.0