Merge branch 'dev' into prcix9320

unilabos/devices/virtual/virtual_multiway_valve.py

@@ -2,6 +2,8 @@ import time
 import logging
 from typing import Union, Dict, Optional
 
+from unilabos.registry.decorators import topic_config
+
 
 class VirtualMultiwayValve:
     """
@@ -41,13 +43,11 @@ class VirtualMultiwayValve:
     def target_position(self) -> int:
         return self._target_position
 
-    def get_current_position(self) -> int:
-        """获取当前阀门位置 📍"""
-        return self._current_position
-
-    def get_current_port(self) -> str:
-        """获取当前连接的端口名称 🔌"""
-        return self._current_position
+    @property
+    @topic_config()
+    def current_port(self) -> str:
+        """当前连接的端口名称 🔌"""
+        return self.port
 
     def set_position(self, command: Union[int, str]):
         """
@@ -169,12 +169,14 @@ class VirtualMultiwayValve:
         self._status = "Idle"
         self._valve_state = "Closed"
         
-        close_msg = f"🔒 阀门已关闭，保持在位置 {self._current_position} ({self.get_current_port()})"
+        close_msg = f"🔒 阀门已关闭，保持在位置 {self._current_position} ({self.port})"
         self.logger.info(close_msg)
         return close_msg
 
-    def get_valve_position(self) -> int:
-        """获取阀门位置 - 兼容性方法 📍"""
+    @property
+    @topic_config()
+    def valve_position(self) -> int:
+        """阀门位置 📍"""
         return self._current_position
 
     def set_valve_position(self, command: Union[int, str]):
@@ -229,19 +231,16 @@ class VirtualMultiwayValve:
             self.logger.info(f"🔄 从端口 {self._current_position} 切换到泵位置...")
             return self.set_to_pump_position()
 
-    def get_flow_path(self) -> str:
-        """获取当前流路路径描述 🌊"""
-        current_port = self.get_current_port()
+    @property
+    @topic_config()
+    def flow_path(self) -> str:
+        """当前流路路径描述 🌊"""
         if self._current_position == 0:
-            flow_path = f"🚰 转移泵已连接 (位置 {self._current_position})"
-        else:
-            flow_path = f"🔌 端口 {self._current_position} 已连接 ({current_port})"
-        
-        # 删除debug日志：self.logger.debug(f"🌊 当前流路: {flow_path}")
-        return flow_path
+            return f"🚰 转移泵已连接 (位置 {self._current_position})"
+        return f"🔌 端口 {self._current_position} 已连接 ({self.current_port})"
 
     def __str__(self):
-        current_port = self.get_current_port()
+        current_port = self.current_port
         status_emoji = "✅" if self._status == "Idle" else "🔄" if self._status == "Busy" else "❌"
         
         return f"🔄 VirtualMultiwayValve({status_emoji} 位置: {self._current_position}/{self.max_positions}, 端口: {current_port}, 状态: {self._status})"
@@ -253,7 +252,7 @@ if __name__ == "__main__":
     
     print("🔄 === 虚拟九通阀门测试 === ✨")
     print(f"🏠 初始状态: {valve}")
-    print(f"🌊 当前流路: {valve.get_flow_path()}")
+    print(f"🌊 当前流路: {valve.flow_path}")
     
     # 切换到试剂瓶1（1号位）
     print(f"\n🔌 切换到1号位: {valve.set_position(1)}")

unilabos/devices/virtual/virtual_stirrer.py

@@ -3,6 +3,7 @@ import logging
 import time as time_module
 from typing import Dict, Any
 
+from unilabos.registry.decorators import topic_config
 from unilabos.ros.nodes.base_device_node import BaseROS2DeviceNode
 
 class VirtualStirrer:
@@ -314,9 +315,11 @@ class VirtualStirrer:
     def min_speed(self) -> float:
         return self._min_speed
     
-    def get_device_info(self) -> Dict[str, Any]:
-        """获取设备状态信息 📊"""
-        info = {
+    @property
+    @topic_config()
+    def device_info(self) -> Dict[str, Any]:
+        """设备状态快照信息 📊"""
+        return {
             "device_id": self.device_id,
             "status": self.status,
             "operation_mode": self.operation_mode,
@@ -325,12 +328,9 @@ class VirtualStirrer:
             "is_stirring": self.is_stirring,
             "remaining_time": self.remaining_time,
             "max_speed": self._max_speed,
-            "min_speed": self._min_speed
+            "min_speed": self._min_speed,
         }
-        
-        # self.logger.debug(f"📊 设备信息: 模式={self.operation_mode}, 速度={self.current_speed} RPM, 搅拌={self.is_stirring}")
-        return info
-    
+
     def __str__(self):
         status_emoji = "✅" if self.operation_mode == "Idle" else "🌪️" if self.operation_mode == "Stirring" else "🛑" if self.operation_mode == "Settling" else "❌"
         return f"🌪️ VirtualStirrer({status_emoji} {self.device_id}: {self.operation_mode}, {self.current_speed} RPM)"

unilabos/devices/virtual/virtual_transferpump.py

@@ -4,6 +4,7 @@ from enum import Enum
 from typing import Union, Optional
 import logging
 
+from unilabos.registry.decorators import topic_config
 from unilabos.ros.nodes.base_device_node import BaseROS2DeviceNode
 
 
@@ -385,8 +386,10 @@ class VirtualTransferPump:
         """获取当前体积"""
         return self._current_volume
 
-    def get_remaining_capacity(self) -> float:
-        """获取剩余容量"""
+    @property
+    @topic_config()
+    def remaining_capacity(self) -> float:
+        """剩余容量 (ml)"""
         return self.max_volume - self._current_volume
 
     def is_empty(self) -> bool:

unilabos/devices/virtual/workbench.py

@@ -14,19 +14,30 @@ Virtual Workbench Device - 模拟工作台设备
 
 import logging
 import time
-from typing import Dict, Any, Optional, List
 from dataclasses import dataclass
 from enum import Enum
 from threading import Lock, RLock
+from typing import Any, Dict, List, Optional, cast
 
 from typing_extensions import TypedDict
 
 from unilabos.registry.decorators import (
-    device, action, ActionInputHandle, ActionOutputHandle, DataSource, topic_config, not_action
+    ActionInputHandle,
+    ActionOutputHandle,
+    DataSource,
+    NodeType,
+    action,
+    device,
+    not_action,
+    topic_config,
+)
+from unilabos.registry.placeholder_type import ResourceSlot, DeviceSlot
+from unilabos.ros.nodes.base_device_node import BaseROS2DeviceNode, ROS2DeviceNode
+from unilabos.resources.resource_tracker import (
+    SampleUUIDsType,
+    LabSample,
+    ResourceTreeSet,
 )
-from unilabos.ros.nodes.base_device_node import BaseROS2DeviceNode
-from unilabos.resources.resource_tracker import SampleUUIDsType, LabSample
-
 
 # ============ TypedDict 返回类型定义 ============
 
@@ -111,6 +122,7 @@ class HeatingStation:
 
 @device(
     id="virtual_workbench",
+    display_name="虚拟工作台",
     category=["virtual_device"],
     description="Virtual Workbench with 1 robotic arm and 3 heating stations for concurrent material processing",
 )
@@ -136,7 +148,19 @@ class VirtualWorkbench:
     HEATING_TIME: float = 60.0  # 加热时间(秒)
     NUM_HEATING_STATIONS: int = 3  # 加热台数量
 
-    def __init__(self, device_id: Optional[str] = None, config: Optional[Dict[str, Any]] = None, **kwargs):
+    def __init__(
+        self,
+        device_id: Optional[str] = None,
+        config: Optional[Dict[str, Any]] = None,
+        **kwargs,
+    ):
+        """
+        初始化虚拟工作台。
+
+        Args:
+            device_id[设备ID]: 工作台设备实例 ID，默认使用 virtual_workbench。
+            config[设备配置]: 可包含 arm_operation_time、heating_time、num_heating_stations。
+        """
         # 处理可能的不同调用方式
         if device_id is None and "id" in kwargs:
             device_id = kwargs.pop("id")
@@ -150,9 +174,13 @@ class VirtualWorkbench:
         self.data: Dict[str, Any] = {}
 
         # 从config中获取可配置参数
-        self.ARM_OPERATION_TIME = float(self.config.get("arm_operation_time", self.ARM_OPERATION_TIME))
+        self.ARM_OPERATION_TIME = float(
+            self.config.get("arm_operation_time", self.ARM_OPERATION_TIME)
+        )
         self.HEATING_TIME = float(self.config.get("heating_time", self.HEATING_TIME))
-        self.NUM_HEATING_STATIONS = int(self.config.get("num_heating_stations", self.NUM_HEATING_STATIONS))
+        self.NUM_HEATING_STATIONS = int(
+            self.config.get("num_heating_stations", self.NUM_HEATING_STATIONS)
+        )
 
         # 机械臂状态和锁
         self._arm_lock = Lock()
@@ -161,7 +189,8 @@ class VirtualWorkbench:
 
         # 加热台状态
         self._heating_stations: Dict[int, HeatingStation] = {
-            i: HeatingStation(station_id=i) for i in range(1, self.NUM_HEATING_STATIONS + 1)
+            i: HeatingStation(station_id=i)
+            for i in range(1, self.NUM_HEATING_STATIONS + 1)
         }
         self._stations_lock = RLock()
 
@@ -290,20 +319,292 @@ class VirtualWorkbench:
         self._update_data_status(f"机械臂已释放 (完成: {task})")
         self.logger.info(f"机械臂已释放 (完成: {task})")
 
+    @action(
+        always_free=True,
+        node_type=NodeType.MANUAL_CONFIRM,
+        placeholder_keys={"assignee_user_ids": "unilabos_manual_confirm"},
+        goal_default={"timeout_seconds": 3600, "assignee_user_ids": []},
+        feedback_interval=300,
+        handles=[
+            ActionInputHandle(
+                key="target_device",
+                data_type="device_id",
+                label="目标设备",
+                data_key="target_device",
+                data_source=DataSource.HANDLE,
+            ),
+            ActionInputHandle(
+                key="resource",
+                data_type="resource",
+                label="待转移资源",
+                data_key="resource",
+                data_source=DataSource.HANDLE,
+            ),
+            ActionInputHandle(
+                key="mount_resource",
+                data_type="resource",
+                label="目标孔位",
+                data_key="mount_resource",
+                data_source=DataSource.HANDLE,
+            ),
+            ActionInputHandle(
+                key="collector_mass",
+                data_type="collector_mass",
+                label="极流体质量",
+                data_key="collector_mass",
+                data_source=DataSource.HANDLE,
+            ),
+            ActionInputHandle(
+                key="active_material",
+                data_type="active_material",
+                label="活性物质含量",
+                data_key="active_material",
+                data_source=DataSource.HANDLE,
+            ),
+            ActionInputHandle(
+                key="capacity",
+                data_type="capacity",
+                label="克容量",
+                data_key="capacity",
+                data_source=DataSource.HANDLE,
+            ),
+            ActionInputHandle(
+                key="battery_system",
+                data_type="battery_system",
+                label="电池体系",
+                data_key="battery_system",
+                data_source=DataSource.HANDLE,
+            ),
+            # transfer使用
+            ActionOutputHandle(
+                key="target_device",
+                data_type="device_id",
+                label="目标设备",
+                data_key="target_device",
+                data_source=DataSource.EXECUTOR,
+            ),
+            ActionOutputHandle(
+                key="resource",
+                data_type="resource",
+                label="待转移资源",
+                data_key="resource.@flatten",
+                data_source=DataSource.EXECUTOR,
+            ),
+            ActionOutputHandle(
+                key="mount_resource",
+                data_type="resource",
+                label="目标孔位",
+                data_key="mount_resource.@flatten",
+                data_source=DataSource.EXECUTOR,
+            ),
+            # test使用
+            ActionOutputHandle(
+                key="collector_mass",
+                data_type="collector_mass",
+                label="极流体质量",
+                data_key="collector_mass",
+                data_source=DataSource.EXECUTOR,
+            ),
+            ActionOutputHandle(
+                key="active_material",
+                data_type="active_material",
+                label="活性物质含量",
+                data_key="active_material",
+                data_source=DataSource.EXECUTOR,
+            ),
+            ActionOutputHandle(
+                key="capacity",
+                data_type="capacity",
+                label="克容量",
+                data_key="capacity",
+                data_source=DataSource.EXECUTOR,
+            ),
+            ActionOutputHandle(
+                key="battery_system",
+                data_type="battery_system",
+                label="电池体系",
+                data_key="battery_system",
+                data_source=DataSource.EXECUTOR,
+            ),
+        ],
+    )
+    def manual_confirm(
+        self,
+        resource: List[ResourceSlot],
+        target_device: DeviceSlot,
+        mount_resource: List[ResourceSlot],
+        collector_mass: List[float],
+        active_material: List[float],
+        capacity: List[float],
+        battery_system: List[str],
+        timeout_seconds: int,
+        assignee_user_ids: list[str],
+        **kwargs,
+    ) -> dict:
+        """
+        人工确认资源转移和扣电测试参数。
+
+        Args:
+            resource[待转移资源]: 需要人工确认的资源列表。
+            target_device[目标设备]: 资源要转移到的目标设备 ID。
+            mount_resource[目标孔位]: 资源要挂载到的目标孔位列表。
+            collector_mass[极流体质量]: 每个样品对应的极流体质量。
+            active_material[活性物质含量]: 每个样品对应的活性物质含量。
+            capacity[克容量]: 每个样品对应的克容量，单位 mAh/g。
+            battery_system[电池体系]: 每个样品对应的电池体系名称。
+            timeout_seconds[超时时间]: 人工确认超时时间，单位秒。
+            assignee_user_ids[确认人]: 指定处理人工确认任务的用户 ID 列表。
+
+        Note:
+            修改的结果无效，是只读的。
+        """
+        resource_tree = ResourceTreeSet.from_plr_resources(cast(Any, resource)).dump()
+        mount_resource_tree = ResourceTreeSet.from_plr_resources(cast(Any, mount_resource)).dump()
+        kwargs.update(locals())
+        kwargs.pop("kwargs")
+        kwargs.pop("self")
+        kwargs["resource"] = resource_tree
+        kwargs["mount_resource"] = mount_resource_tree
+        kwargs.pop("resource_tree")
+        kwargs.pop("mount_resource_tree")
+        return kwargs
+
+    @action(
+        description="转移物料",
+        handles=[
+            ActionInputHandle(
+                key="target_device",
+                data_type="device_id",
+                label="目标设备",
+                data_key="target_device",
+                data_source=DataSource.HANDLE,
+            ),
+            ActionInputHandle(
+                key="resource",
+                data_type="resource",
+                label="待转移资源",
+                data_key="resource",
+                data_source=DataSource.HANDLE,
+            ),
+            ActionInputHandle(
+                key="mount_resource",
+                data_type="resource",
+                label="目标孔位",
+                data_key="mount_resource",
+                data_source=DataSource.HANDLE,
+            ),
+        ],
+    )
+    async def transfer(
+        self,
+        resource: List[ResourceSlot],
+        target_device: DeviceSlot,
+        mount_resource: List[ResourceSlot],
+    ):
+        """
+        转移资源到目标设备。
+
+        Args:
+            resource[待转移资源]: 待转移的资源列表。
+            target_device[目标设备]: 接收资源的目标设备 ID。
+            mount_resource[目标孔位]: 目标设备上的挂载孔位列表。
+        """
+        future = ROS2DeviceNode.run_async_func(
+            self._ros_node.transfer_resource_to_another,
+            True,
+            **{
+                "plr_resources": resource,
+                "target_device_id": target_device,
+                "target_resources": mount_resource,
+                "sites": [None] * len(mount_resource),
+            },
+        )
+        result = await future
+        return result
+
+    @action(
+        description="扣电测试启动",
+        handles=[
+            ActionInputHandle(
+                key="resource",
+                data_type="resource",
+                label="待转移资源",
+                data_key="resource",
+                data_source=DataSource.HANDLE,
+            ),
+            ActionInputHandle(
+                key="mount_resource",
+                data_type="resource",
+                label="目标孔位",
+                data_key="mount_resource",
+                data_source=DataSource.HANDLE,
+            ),
+            ActionInputHandle(
+                key="collector_mass",
+                data_type="collector_mass",
+                label="极流体质量",
+                data_key="collector_mass",
+                data_source=DataSource.HANDLE,
+            ),
+            ActionInputHandle(
+                key="active_material",
+                data_type="active_material",
+                label="活性物质含量",
+                data_key="active_material",
+                data_source=DataSource.HANDLE,
+            ),
+            ActionInputHandle(
+                key="capacity",
+                data_type="capacity",
+                label="克容量",
+                data_key="capacity",
+                data_source=DataSource.HANDLE,
+            ),
+            ActionInputHandle(
+                key="battery_system",
+                data_type="battery_system",
+                label="电池体系",
+                data_key="battery_system",
+                data_source=DataSource.HANDLE,
+            ),
+        ],
+    )
+    async def test(
+        self,
+        resource: List[ResourceSlot],
+        mount_resource: List[ResourceSlot],
+        collector_mass: List[float],
+        active_material: List[float],
+        capacity: List[float],
+        battery_system: list[str],
+    ):
+        """
+        启动扣电测试。
+
+        Args:
+            resource[待测试资源]: 需要进行扣电测试的资源列表。
+            mount_resource[测试孔位]: 扣电测试使用的目标孔位列表。
+            collector_mass[极流体质量]: 每个样品对应的极流体质量。
+            active_material[活性物质含量]: 每个样品对应的活性物质含量。
+            capacity[克容量]: 每个样品对应的克容量，单位 mAh/g。
+            battery_system[电池体系]: 每个样品对应的电池体系名称。
+        """
+        print(resource)
+        print(mount_resource)
+        print(collector_mass)
+        print(active_material)
+        print(capacity)
+        print(battery_system)
+
     @action(
         auto_prefix=True,
         description="批量准备物料 - 虚拟起始节点, 生成A1-A5物料, 输出5个handle供后续节点使用",
         handles=[
-            ActionOutputHandle(key="channel_1", data_type="workbench_material",
-                         label="实验1", data_key="material_1", data_source=DataSource.EXECUTOR),
-            ActionOutputHandle(key="channel_2", data_type="workbench_material",
-                         label="实验2", data_key="material_2", data_source=DataSource.EXECUTOR),
-            ActionOutputHandle(key="channel_3", data_type="workbench_material",
-                         label="实验3", data_key="material_3", data_source=DataSource.EXECUTOR),
-            ActionOutputHandle(key="channel_4", data_type="workbench_material",
-                         label="实验4", data_key="material_4", data_source=DataSource.EXECUTOR),
-            ActionOutputHandle(key="channel_5", data_type="workbench_material",
-                         label="实验5", data_key="material_5", data_source=DataSource.EXECUTOR),
+            ActionOutputHandle(key="channel_1", data_type="workbench_material", label="实验1", data_key="material_1", data_source=DataSource.EXECUTOR),  # noqa: E501
+            ActionOutputHandle(key="channel_2", data_type="workbench_material", label="实验2", data_key="material_2", data_source=DataSource.EXECUTOR),  # noqa: E501
+            ActionOutputHandle(key="channel_3", data_type="workbench_material", label="实验3", data_key="material_3", data_source=DataSource.EXECUTOR),  # noqa: E501
+            ActionOutputHandle(key="channel_4", data_type="workbench_material", label="实验4", data_key="material_4", data_source=DataSource.EXECUTOR),  # noqa: E501
+            ActionOutputHandle(key="channel_5", data_type="workbench_material", label="实验5", data_key="material_5", data_source=DataSource.EXECUTOR),  # noqa: E501
         ],
     )
     def prepare_materials(
@@ -316,6 +617,9 @@ class VirtualWorkbench:
 
         作为工作流的起始节点, 生成指定数量的物料编号供后续节点使用。
         输出5个handle (material_1 ~ material_5), 分别对应实验1~5。
+
+        Args:
+            count[物料数量]: 要生成的物料数量，默认生成 5 个。
         """
         materials = [i for i in range(1, count + 1)]
 
@@ -336,7 +640,11 @@ class VirtualWorkbench:
                 LabSample(
                     sample_uuid=sample_uuid,
                     oss_path="",
-                    extra={"material_uuid": content} if isinstance(content, str) else (content.serialize() if content else {}),
+                    extra=(
+                        {"material_uuid": content}
+                        if isinstance(content, str)
+                        else (content.serialize() if content else {})
+                    ),
                 )
                 for sample_uuid, content in sample_uuids.items()
             ],
@@ -346,12 +654,27 @@ class VirtualWorkbench:
         auto_prefix=True,
         description="将物料从An位置移动到空闲加热台, 返回分配的加热台ID",
         handles=[
-            ActionInputHandle(key="material_input", data_type="workbench_material",
-                        label="物料编号", data_key="material_number", data_source=DataSource.HANDLE),
-            ActionOutputHandle(key="heating_station_output", data_type="workbench_station",
-                         label="加热台ID", data_key="station_id", data_source=DataSource.EXECUTOR),
-            ActionOutputHandle(key="material_number_output", data_type="workbench_material",
-                         label="物料编号", data_key="material_number", data_source=DataSource.EXECUTOR),
+            ActionInputHandle(
+                key="material_input",
+                data_type="workbench_material",
+                label="物料编号",
+                data_key="material_number",
+                data_source=DataSource.HANDLE,
+            ),
+            ActionOutputHandle(
+                key="heating_station_output",
+                data_type="workbench_station",
+                label="加热台ID",
+                data_key="station_id",
+                data_source=DataSource.EXECUTOR,
+            ),
+            ActionOutputHandle(
+                key="material_number_output",
+                data_type="workbench_material",
+                label="物料编号",
+                data_key="material_number",
+                data_source=DataSource.EXECUTOR,
+            ),
         ],
     )
     def move_to_heating_station(
@@ -363,6 +686,9 @@ class VirtualWorkbench:
         将物料从An位置移动到加热台
 
         多线程并发调用时, 会竞争机械臂使用权, 并自动查找空闲加热台
+
+        Args:
+            material_number[物料编号]: 要移动的物料编号，对应 A1、A2 等起始位置。
         """
         material_id = f"A{material_number}"
         task_desc = f"移动{material_id}到加热台"
@@ -425,7 +751,8 @@ class VirtualWorkbench:
                         oss_path="",
                         extra=(
                             {"material_uuid": content}
-                            if isinstance(content, str) else (content.serialize() if content else {})
+                            if isinstance(content, str)
+                            else (content.serialize() if content else {})
                         ),
                     )
                     for sample_uuid, content in sample_uuids.items()
@@ -448,7 +775,8 @@ class VirtualWorkbench:
                         oss_path="",
                         extra=(
                             {"material_uuid": content}
-                            if isinstance(content, str) else (content.serialize() if content else {})
+                            if isinstance(content, str)
+                            else (content.serialize() if content else {})
                         ),
                     )
                     for sample_uuid, content in sample_uuids.items()
@@ -460,14 +788,34 @@ class VirtualWorkbench:
         always_free=True,
         description="启动指定加热台的加热程序",
         handles=[
-            ActionInputHandle(key="station_id_input", data_type="workbench_station",
-                        label="加热台ID", data_key="station_id", data_source=DataSource.HANDLE),
-            ActionInputHandle(key="material_number_input", data_type="workbench_material",
-                        label="物料编号", data_key="material_number", data_source=DataSource.HANDLE),
-            ActionOutputHandle(key="heating_done_station", data_type="workbench_station",
-                         label="加热完成-加热台ID", data_key="station_id", data_source=DataSource.EXECUTOR),
-            ActionOutputHandle(key="heating_done_material", data_type="workbench_material",
-                         label="加热完成-物料编号", data_key="material_number", data_source=DataSource.EXECUTOR),
+            ActionInputHandle(
+                key="station_id_input",
+                data_type="workbench_station",
+                label="加热台ID",
+                data_key="station_id",
+                data_source=DataSource.HANDLE,
+            ),
+            ActionInputHandle(
+                key="material_number_input",
+                data_type="workbench_material",
+                label="物料编号",
+                data_key="material_number",
+                data_source=DataSource.HANDLE,
+            ),
+            ActionOutputHandle(
+                key="heating_done_station",
+                data_type="workbench_station",
+                label="加热完成-加热台ID",
+                data_key="station_id",
+                data_source=DataSource.EXECUTOR,
+            ),
+            ActionOutputHandle(
+                key="heating_done_material",
+                data_type="workbench_material",
+                label="加热完成-物料编号",
+                data_key="material_number",
+                data_source=DataSource.EXECUTOR,
+            ),
         ],
     )
     def start_heating(
@@ -478,6 +826,10 @@ class VirtualWorkbench:
     ) -> StartHeatingResult:
         """
         启动指定加热台的加热程序
+
+        Args:
+            station_id[加热台ID]: 要启动加热的加热台编号。
+            material_number[物料编号]: 当前加热台上的物料编号。
         """
         self.logger.info(f"[加热台{station_id}] 开始加热")
 
@@ -494,7 +846,8 @@ class VirtualWorkbench:
                         oss_path="",
                         extra=(
                             {"material_uuid": content}
-                            if isinstance(content, str) else (content.serialize() if content else {})
+                            if isinstance(content, str)
+                            else (content.serialize() if content else {})
                         ),
                     )
                     for sample_uuid, content in sample_uuids.items()
@@ -517,7 +870,8 @@ class VirtualWorkbench:
                             oss_path="",
                             extra=(
                                 {"material_uuid": content}
-                                if isinstance(content, str) else (content.serialize() if content else {})
+                                if isinstance(content, str)
+                                else (content.serialize() if content else {})
                             ),
                         )
                         for sample_uuid, content in sample_uuids.items()
@@ -537,7 +891,8 @@ class VirtualWorkbench:
                             oss_path="",
                             extra=(
                                 {"material_uuid": content}
-                                if isinstance(content, str) else (content.serialize() if content else {})
+                                if isinstance(content, str)
+                                else (content.serialize() if content else {})
                             ),
                         )
                         for sample_uuid, content in sample_uuids.items()
@@ -577,7 +932,9 @@ class VirtualWorkbench:
             self._update_data_status(f"加热台{station_id}加热中: {progress:.1f}%")
 
             if time.time() - last_countdown_log >= 5.0:
-                self.logger.info(f"[加热台{station_id}] {material_id} 剩余 {remaining:.1f}s")
+                self.logger.info(
+                    f"[加热台{station_id}] {material_id} 剩余 {remaining:.1f}s"
+                )
                 last_countdown_log = time.time()
 
             if elapsed >= self.HEATING_TIME:
@@ -594,7 +951,9 @@ class VirtualWorkbench:
                 self._active_tasks[material_id]["status"] = "heating_completed"
 
         self._update_data_status(f"加热台{station_id}加热完成")
-        self.logger.info(f"[加热台{station_id}] {material_id}加热完成 (用时{self.HEATING_TIME}s)")
+        self.logger.info(
+            f"[加热台{station_id}] {material_id}加热完成 (用时{self.HEATING_TIME}s)"
+        )
 
         return {
             "success": True,
@@ -608,7 +967,8 @@ class VirtualWorkbench:
                     oss_path="",
                     extra=(
                         {"material_uuid": content}
-                        if isinstance(content, str) else (content.serialize() if content else {})
+                        if isinstance(content, str)
+                        else (content.serialize() if content else {})
                     ),
                 )
                 for sample_uuid, content in sample_uuids.items()
@@ -619,10 +979,20 @@ class VirtualWorkbench:
         auto_prefix=True,
         description="将物料从加热台移动到输出位置Cn",
         handles=[
-            ActionInputHandle(key="output_station_input", data_type="workbench_station",
-                        label="加热台ID", data_key="station_id", data_source=DataSource.HANDLE),
-            ActionInputHandle(key="output_material_input", data_type="workbench_material",
-                        label="物料编号", data_key="material_number", data_source=DataSource.HANDLE),
+            ActionInputHandle(
+                key="output_station_input",
+                data_type="workbench_station",
+                label="加热台ID",
+                data_key="station_id",
+                data_source=DataSource.HANDLE,
+            ),
+            ActionInputHandle(
+                key="output_material_input",
+                data_type="workbench_material",
+                label="物料编号",
+                data_key="material_number",
+                data_source=DataSource.HANDLE,
+            ),
         ],
     )
     def move_to_output(
@@ -633,6 +1003,10 @@ class VirtualWorkbench:
     ) -> MoveToOutputResult:
         """
         将物料从加热台移动到输出位置Cn
+
+        Args:
+            station_id[加热台ID]: 已完成加热的加热台编号。
+            material_number[物料编号]: 要移动到输出位置的物料编号，对应 Cn。
         """
         output_number = material_number
 
@@ -649,7 +1023,8 @@ class VirtualWorkbench:
                         oss_path="",
                         extra=(
                             {"material_uuid": content}
-                            if isinstance(content, str) else (content.serialize() if content else {})
+                            if isinstance(content, str)
+                            else (content.serialize() if content else {})
                         ),
                     )
                     for sample_uuid, content in sample_uuids.items()
@@ -673,7 +1048,8 @@ class VirtualWorkbench:
                             oss_path="",
                             extra=(
                                 {"material_uuid": content}
-                                if isinstance(content, str) else (content.serialize() if content else {})
+                                if isinstance(content, str)
+                                else (content.serialize() if content else {})
                             ),
                         )
                         for sample_uuid, content in sample_uuids.items()
@@ -693,7 +1069,8 @@ class VirtualWorkbench:
                             oss_path="",
                             extra=(
                                 {"material_uuid": content}
-                                if isinstance(content, str) else (content.serialize() if content else {})
+                                if isinstance(content, str)
+                                else (content.serialize() if content else {})
                             ),
                         )
                         for sample_uuid, content in sample_uuids.items()
@@ -775,7 +1152,8 @@ class VirtualWorkbench:
                         oss_path="",
                         extra=(
                             {"material_uuid": content}
-                            if isinstance(content, str) else (content.serialize() if content else {})
+                            if isinstance(content, str)
+                            else (content.serialize() if content else {})
                         ),
                     )
                     for sample_uuid, content in sample_uuids.items()